Annotation of doc/loncapafiles/buildfiles.lpml, revision 1.13
1.1 harris41 1: <!DOCTYPE lpml PUBLIC "-//TUX/DTD lpml 1.0 Final//EN"
2: "http://lpml.sourceforge.net/DTD/lpml.dtd">
3: <!-- buildfiles.lpml -->
4:
1.13 ! albertel 5: <!-- $Id: buildfiles.lpml,v 1.12 2004/07/02 22:39:37 albertel Exp $ -->
1.1 harris41 6:
7: <!--
8:
9: Copyright Michigan State University Board of Trustees
10:
11: This file is part of the LearningOnline Network with CAPA (LON-CAPA).
12:
13: LON-CAPA is free software; you can redistribute it and/or modify
14: it under the terms of the GNU General Public License as published by
15: the Free Software Foundation; either version 2 of the License, or
16: (at your option) any later version.
17:
18: LON-CAPA is distributed in the hope that it will be useful,
19: but WITHOUT ANY WARRANTY; without even the implied warranty of
20: MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21: GNU General Public License for more details.
22:
23: You should have received a copy of the GNU General Public License
24: along with LON-CAPA; if not, write to the Free Software
25: Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
26:
27: /home/httpd/html/adm/gpl.txt
28:
29: http://www.lon-capa.org/
30:
31: -->
32:
33: <!-- Default values must be defined before specific values. -->
34: <!-- If no 'dist' attribute is specified, then it is always installed. -->
35: <!-- If 'dist' attribute is set to 'default', then the specification. -->
36: <!-- is accepted if an alternative distribution is not requested or not -->
37: <!-- defined. -->
38:
39: <lpml>
40: <specialnotices>
41: <specialnotice dist='default'>
42: </specialnotice>
43: </specialnotices>
44: <targetroot>/build</targetroot>
45: <sourceroot>/home/user/loncapa/</sourceroot>
46: <categories>
47: <category name="system file" type="runtime">
48: <chmod dist='default'>0644</chmod><chown dist='default'>root:root</chown>
49: <abbreviation>systemfile</abbreviation>
50: </category>
51: <category name="system file" type="development">
52: <chmod dist='default'>0644</chmod><chown dist='default'>root:root</chown>
53: <abbreviation>systemfile</abbreviation>
54: </category>
55: <category name="standard" type="runtime">
56: <chmod dist='default'>0755</chmod><chown dist='default'>root:root</chown>
57: <abbreviation>directory</abbreviation>
58: </category>
59: <category name="standard" type="development">
60: <chmod dist='default'>0755</chmod><chown dist='default'>root:root</chown>
61: <abbreviation>directory</abbreviation>
62: </category>
63: </categories>
64: <directories>
65: </directories>
66: <files>
67: <file>
68: <source>loncom/build/Makefile</source>
69: <target dist='default'>Makefile</target>
70: <categoryname>system file</categoryname>
71: <description>
72: Makefile for LON-CAPA
73: </description>
74: <note>
75: </note>
1.5 albertel 76: <dependencies>
77: doc/loncapafiles/configurable.gif;
78: doc/loncapafiles/directory.gif;
79: doc/loncapafiles/emptydirectory.gif;
80: doc/loncapafiles/graphicfile.gif;
81: doc/loncapafiles/handler.gif;
82: doc/loncapafiles/interfacefile.gif;
83: doc/loncapafiles/link.gif;
84: doc/loncapafiles/rootscript.gif;
85: doc/loncapafiles/script.gif;
86: doc/loncapafiles/setuid.gif;
87: doc/loncapafiles/static.gif;
88: doc/loncapafiles/systemfile.gif
89: </dependencies>
1.1 harris41 90: </file>
91: <file>
92: <source>doc/loncapafiles/loncapafiles.lpml</source>
93: <target dist='default'>loncapafiles.lpml</target>
94: <categoryname>system file</categoryname>
95: <description>
96: Describes the files that implement LON-CAPA on the filesystem
97: </description>
98: <note>
99: </note>
100: </file>
101: <file>
102: <source>doc/loncapafiles/buildfiles.lpml</source>
103: <target dist='default'>buildfiles.lpml</target>
104: <categoryname>system file</categoryname>
105: <description>
106: Describes the files that implement the building of LON-CAPA inside the source
107: file tree.
1.6 harris41 108: </description>
109: <note>
110: </note>
111: </file>
112: <file>
113: <source>doc/loncapafiles/installfiles.lpml</source>
114: <target dist='default'>installfiles.lpml</target>
115: <categoryname>system file</categoryname>
116: <description>
117: Describes the files that help automate LON-CAPA installations on specific
118: operating systems.
1.1 harris41 119: </description>
120: <note>
121: </note>
122: </file>
123: <file>
124: <source>doc/loncapafiles/webserver.piml</source>
125: <target dist='default'>webserver.piml</target>
126: <categoryname>system file</categoryname>
127: <description>
128: Post-installation of web server configuration files
1.3 albertel 129: </description>
130: <note>
131: </note>
132: </file>
133: <file>
134: <source>doc/loncapafiles/reseval_fixup.piml</source>
135: <target dist='default'>reseval_fixup.piml</target>
136: <categoryname>system file</categoryname>
137: <description>
138: Migrates reseval.db to nohist_eseval.db, deletes useless hist file
1.8 matthew 139: </description>
140: <note>
141: </note>
142: </file>
143: <file>
144: <source>doc/loncapafiles/accesscount_seed.piml</source>
145: <target dist='default'>accesscount_seed.piml</target>
146: <categoryname>system file</categoryname>
147: <description>
148: Executes seed_accesscount.pl on each nohist_resevaldata.db file to move access
149: count data to nohist_accesscount.db and compact the nohist_resevaldata.db
150: file.
1.1 harris41 151: </description>
152: <note>
153: </note>
154: </file>
155: <file>
1.4 albertel 156: <source>doc/loncapafiles/clearoutoldspreadsheetcache.piml</source>
157: <target dist='default'>clearoutoldspreadsheetcache.piml</target>
158: <categoryname>system file</categoryname>
159: <description>
160: Deletes all of the old spreadsheet cache files, the ones generated prior
161: to version 0.6 were incorrect
162: </description>
163: <note>
164: </note>
165: </file>
166: <file>
1.1 harris41 167: <source>doc/loncapafiles/sanitycheck.piml</source>
168: <target dist='default'>sanitycheck.piml</target>
1.2 harris41 169: <categoryname>system file</categoryname>
170: <description>
171: Checks LON-CAPA system for frequently occuring bugs.
1.10 matthew 172: </description>
173: <note>
174: </note>
175: </file>
176: <file>
1.12 albertel 177: <source>doc/loncapafiles/cron_lpmlcheck.piml</source>
178: <target dist='default'>cron_lpmlcheck.piml</target>
179: <categoryname>system file</categoryname>
180: <description>
181: Checks that there is no lpmlsave file in the cron.d dir
182: </description>
183: </file>
184: <file>
1.10 matthew 185: <source>doc/loncapafiles/ntpcheck.piml</source>
186: <target dist='default'>ntpcheck.piml</target>
187: <categoryname>system file</categoryname>
188: <description>
189: Checks server to determine status of ntpd.
1.11 matthew 190: </description>
191: <note>
192: </note>
193: </file>
194: <file>
195: <source>doc/loncapafiles/rpmcheck.piml</source>
196: <target dist='default'>rpmcheck.piml</target>
197: <categoryname>system file</categoryname>
198: <description>
199: Checks server for rpms known to conflict with LON-CAPA.
1.2 harris41 200: </description>
201: <note>
202: </note>
203: </file>
204: <file>
205: <source>doc/loncapafiles/updatequery.piml</source>
206: <target dist='default'>updatequery.piml</target>
1.1 harris41 207: <categoryname>system file</categoryname>
208: <description>
209: Checks LON-CAPA system for frequently occuring bugs.
1.4 albertel 210: </description>
211: <note>
212: </note>
213: </file>
214: <file>
215: <source>doc/loncapafiles/sendmail_fix.piml</source>
216: <target dist='default'>sendmail_fix.piml</target>
217: <categoryname>system file</categoryname>
218: <description>
219: Checks LON-CAPA system for sendmail permissions error.
1.9 www 220: </description>
221: <note>
222: </note>
223: </file>
224: <file>
225: <source>doc/loncapafiles/ownership_fix.piml</source>
226: <target dist='default'>ownership_fix.piml</target>
227: <categoryname>system file</categoryname>
228: <description>
229: Makes sure that /home/httpd/lonUsers and /home/httpd/html are owned by www.
1.1 harris41 230: </description>
231: <note>
232: </note>
233: </file>
234: <file>
1.13 ! albertel 235: <source>doc/loncapafiles/run_searchcat.piml</source>
! 236: <target dist='default'>run_searchcat.piml</target>
! 237: <categoryname>system file</categoryname>
! 238: <description>
! 239: Makes sure that /home/httpd/lonUsers and /home/httpd/html are owned by www.
! 240: </description>
! 241: <note>
! 242: </note>
! 243: </file>
! 244: <file>
1.1 harris41 245: <source>doc/loncapafiles/valid_hosts.xfml</source>
246: <target dist='default'>valid_hosts.xfml</target>
247: <categoryname>system file</categoryname>
248: <description>
249: Useful for extracting (and pushing/pulling) information relevant
250: to hosts.tab.
251: </description>
252: <note>
253: </note>
254: </file>
255: <file>
256: <source>loncom/build/check-rpms</source>
257: <target dist='default'>check-rpms</target>
258: <categoryname>system file</categoryname>
259: <description>
260: script for checking RPMS against an RPM repository
261: </description>
262: <note>
263: </note>
264: </file>
265: <file>
266: <source>loncom/build/distprobe</source>
267: <target dist='default'>distprobe</target>
268: <categoryname>system file</categoryname>
269: <description>
270: for probing operating system flavor and version
271: </description>
272: <note>
273: </note>
274: </file>
275: <file>
276: <source>loncom/build/doc_template.pl</source>
277: <target dist='default'>doc_template.pl</target>
278: <categoryname>system file</categoryname>
279: <description>
280: for making fancy install.lon-capa.org pages
281: </description>
282: <note>
283: </note>
284: </file>
285: <file>
286: <source>loncom/build/filecompare.pl</source>
287: <target dist='default'>filecompare.pl</target>
288: <categoryname>system file</categoryname>
289: <description>
290: rigorously compare many different values associated between files
291: </description>
292: <note>
293: </note>
294: </file>
295: <file>
296: <source>loncom/build/loncaparestoreconfigurations</source>
297: <target dist='default'>loncaparestoreconfigurations</target>
298: <categoryname>system file</categoryname>
299: <description>
300: intelligently restore configuration values
301: </description>
302: <note>
303: </note>
304: </file>
305: <file>
306: <source>loncom/build/lpml.dtd</source>
307: <target dist='default'>lpml.dtd</target>
308: <categoryname>system file</categoryname>
309: <description>
310: DocumentType for LPML
311: </description>
312: <note>
313: </note>
314: </file>
315: <file>
316: <source>loncom/build/lpml_html_posteval.pl</source>
317: <target dist='default'>lpml_html_posteval.pl</target>
318: <categoryname>system file</categoryname>
319: <description>
320: </description>
321: <note>
322: </note>
323: </file>
324: <file>
325: <source>loncom/build/lpml_parse.pl</source>
326: <target dist='default'>lpml_parse.pl</target>
327: <categoryname>system file</categoryname>
328: <description>
329: parse apart the loncapafiles.lpml and buildfiles.lpml
330: </description>
331: <note>
332: </note>
333: </file>
334: <file>
335: <source>loncom/build/make_domain_coordinator.pl</source>
336: <target dist='default'>make_domain_coordinator.pl</target>
337: <categoryname>system file</categoryname>
338: <description>
339: make a domain coordinator on a new LON-CAPA system
340: </description>
341: <note>
342: </note>
343: </file>
344: <file>
345: <source>loncom/build/piml.dtd</source>
346: <target dist='default'>piml.dtd</target>
347: <categoryname>system file</categoryname>
348: <description>
349: DocumentType definition for PIML (part of the LPML system)
350: </description>
351: <note>
352: </note>
353: </file>
354: <file>
355: <source>loncom/build/piml_parse.pl</source>
356: <target dist='default'>piml_parse.pl</target>
357: <categoryname>system file</categoryname>
358: <description>
359: parse a PIML file
360: </description>
361: <note>
362: </note>
363: </file>
364: <file>
365: <source>loncom/build/pod2html.sh</source>
366: <target dist='default'>pod2html.sh</target>
367: <categoryname>system file</categoryname>
368: <description>
369: make HTML documentation pages
370: </description>
371: <note>
372: </note>
373: </file>
374: <file>
375: <source>loncom/build/pod2man.sh</source>
376: <target dist='default'>pod2man.sh</target>
377: <categoryname>system file</categoryname>
378: <description>
379: make UNIX-style manual pages
380: </description>
381: <note>
382: </note>
383: </file>
384: <file>
385: <source>loncom/build/verify.pl</source>
386: <target dist='default'>verify.pl</target>
387: <categoryname>system file</categoryname>
388: <description>
389: wraps around filecompare.pl for posteval LPML statements
390: </description>
391: <note>
392: </note>
393: </file>
394: <file>
395: <source>loncom/build/verifymodown.pl</source>
396: <target dist='default'>verifymodown.pl</target>
397: <categoryname>system file</categoryname>
398: <description>
399: double-checks modification and ownership on files
400: </description>
401: <note>
402: </note>
403: </file>
404: <file>
405: <source>loncom/build/xfml.dtd</source>
406: <target dist='default'>xfml.dtd</target>
407: <categoryname>system file</categoryname>
408: <description>
409: DocumentType definition for XFML (part of the LPML system)
410: </description>
411: <note>
412: </note>
413: </file>
414: <file>
415: <source>loncom/build/xfml_parse.pl</source>
416: <target dist='default'>xfml_parse.pl</target>
417: <categoryname>system file</categoryname>
418: <description>
419: parses XFML files
420: </description>
421: <note>
422: </note>
423: </file>
424: </files>
425: </lpml>
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/back.gif){kind=icon}
Return to buildfiles.lpml CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [LON-CAPA] / doc / loncapafiles