Annotation of doc/loncapafiles/buildfiles.lpml, revision 1.8
1.1 harris41 1: <!DOCTYPE lpml PUBLIC "-//TUX/DTD lpml 1.0 Final//EN"
2: "http://lpml.sourceforge.net/DTD/lpml.dtd">
3: <!-- buildfiles.lpml -->
4:
1.8 ! matthew 5: <!-- $Id: buildfiles.lpml,v 1.7 2003/02/03 18:03:51 harris41 Exp $ -->
1.1 harris41 6:
7: <!--
8:
9: Copyright Michigan State University Board of Trustees
10:
11: This file is part of the LearningOnline Network with CAPA (LON-CAPA).
12:
13: LON-CAPA is free software; you can redistribute it and/or modify
14: it under the terms of the GNU General Public License as published by
15: the Free Software Foundation; either version 2 of the License, or
16: (at your option) any later version.
17:
18: LON-CAPA is distributed in the hope that it will be useful,
19: but WITHOUT ANY WARRANTY; without even the implied warranty of
20: MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21: GNU General Public License for more details.
22:
23: You should have received a copy of the GNU General Public License
24: along with LON-CAPA; if not, write to the Free Software
25: Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
26:
27: /home/httpd/html/adm/gpl.txt
28:
29: http://www.lon-capa.org/
30:
31: -->
32:
33: <!-- Default values must be defined before specific values. -->
34: <!-- If no 'dist' attribute is specified, then it is always installed. -->
35: <!-- If 'dist' attribute is set to 'default', then the specification. -->
36: <!-- is accepted if an alternative distribution is not requested or not -->
37: <!-- defined. -->
38:
39: <lpml>
40: <specialnotices>
41: <specialnotice dist='default'>
42: </specialnotice>
43: </specialnotices>
44: <targetroot>/build</targetroot>
45: <sourceroot>/home/user/loncapa/</sourceroot>
46: <categories>
47: <category name="system file" type="runtime">
48: <chmod dist='default'>0644</chmod><chown dist='default'>root:root</chown>
49: <abbreviation>systemfile</abbreviation>
50: </category>
51: <category name="system file" type="development">
52: <chmod dist='default'>0644</chmod><chown dist='default'>root:root</chown>
53: <abbreviation>systemfile</abbreviation>
54: </category>
55: <category name="standard" type="runtime">
56: <chmod dist='default'>0755</chmod><chown dist='default'>root:root</chown>
57: <abbreviation>directory</abbreviation>
58: </category>
59: <category name="standard" type="development">
60: <chmod dist='default'>0755</chmod><chown dist='default'>root:root</chown>
61: <abbreviation>directory</abbreviation>
62: </category>
63: </categories>
64: <directories>
65: </directories>
66: <files>
67: <file>
68: <source>loncom/build/Makefile</source>
69: <target dist='default'>Makefile</target>
70: <categoryname>system file</categoryname>
71: <description>
72: Makefile for LON-CAPA
73: </description>
74: <note>
75: </note>
1.5 albertel 76: <dependencies>
77: doc/loncapafiles/configurable.gif;
78: doc/loncapafiles/directory.gif;
79: doc/loncapafiles/emptydirectory.gif;
80: doc/loncapafiles/graphicfile.gif;
81: doc/loncapafiles/handler.gif;
82: doc/loncapafiles/interfacefile.gif;
83: doc/loncapafiles/link.gif;
84: doc/loncapafiles/rootscript.gif;
85: doc/loncapafiles/script.gif;
86: doc/loncapafiles/setuid.gif;
87: doc/loncapafiles/static.gif;
88: doc/loncapafiles/systemfile.gif
89: </dependencies>
1.1 harris41 90: </file>
91: <file>
92: <source>doc/loncapafiles/loncapafiles.lpml</source>
93: <target dist='default'>loncapafiles.lpml</target>
94: <categoryname>system file</categoryname>
95: <description>
96: Describes the files that implement LON-CAPA on the filesystem
97: </description>
98: <note>
99: </note>
100: </file>
101: <file>
102: <source>doc/loncapafiles/buildfiles.lpml</source>
103: <target dist='default'>buildfiles.lpml</target>
104: <categoryname>system file</categoryname>
105: <description>
106: Describes the files that implement the building of LON-CAPA inside the source
107: file tree.
1.6 harris41 108: </description>
109: <note>
110: </note>
111: </file>
112: <file>
113: <source>doc/loncapafiles/installfiles.lpml</source>
114: <target dist='default'>installfiles.lpml</target>
115: <categoryname>system file</categoryname>
116: <description>
117: Describes the files that help automate LON-CAPA installations on specific
118: operating systems.
1.1 harris41 119: </description>
120: <note>
121: </note>
122: </file>
123: <file>
124: <source>doc/loncapafiles/webserver.piml</source>
125: <target dist='default'>webserver.piml</target>
126: <categoryname>system file</categoryname>
127: <description>
128: Post-installation of web server configuration files
1.3 albertel 129: </description>
130: <note>
131: </note>
132: </file>
133: <file>
134: <source>doc/loncapafiles/reseval_fixup.piml</source>
135: <target dist='default'>reseval_fixup.piml</target>
136: <categoryname>system file</categoryname>
137: <description>
138: Migrates reseval.db to nohist_eseval.db, deletes useless hist file
1.8 ! matthew 139: </description>
! 140: <note>
! 141: </note>
! 142: </file>
! 143: <file>
! 144: <source>doc/loncapafiles/accesscount_seed.piml</source>
! 145: <target dist='default'>accesscount_seed.piml</target>
! 146: <categoryname>system file</categoryname>
! 147: <description>
! 148: Executes seed_accesscount.pl on each nohist_resevaldata.db file to move access
! 149: count data to nohist_accesscount.db and compact the nohist_resevaldata.db
! 150: file.
1.1 harris41 151: </description>
152: <note>
153: </note>
154: </file>
155: <file>
1.4 albertel 156: <source>doc/loncapafiles/clearoutoldspreadsheetcache.piml</source>
157: <target dist='default'>clearoutoldspreadsheetcache.piml</target>
158: <categoryname>system file</categoryname>
159: <description>
160: Deletes all of the old spreadsheet cache files, the ones generated prior
161: to version 0.6 were incorrect
162: </description>
163: <note>
164: </note>
165: </file>
166: <file>
1.1 harris41 167: <source>doc/loncapafiles/sanitycheck.piml</source>
168: <target dist='default'>sanitycheck.piml</target>
1.2 harris41 169: <categoryname>system file</categoryname>
170: <description>
171: Checks LON-CAPA system for frequently occuring bugs.
172: </description>
173: <note>
174: </note>
175: </file>
176: <file>
177: <source>doc/loncapafiles/updatequery.piml</source>
178: <target dist='default'>updatequery.piml</target>
1.1 harris41 179: <categoryname>system file</categoryname>
180: <description>
181: Checks LON-CAPA system for frequently occuring bugs.
1.4 albertel 182: </description>
183: <note>
184: </note>
185: </file>
186: <file>
187: <source>doc/loncapafiles/sendmail_fix.piml</source>
188: <target dist='default'>sendmail_fix.piml</target>
189: <categoryname>system file</categoryname>
190: <description>
191: Checks LON-CAPA system for sendmail permissions error.
1.1 harris41 192: </description>
193: <note>
194: </note>
195: </file>
196: <file>
197: <source>doc/loncapafiles/valid_hosts.xfml</source>
198: <target dist='default'>valid_hosts.xfml</target>
199: <categoryname>system file</categoryname>
200: <description>
201: Useful for extracting (and pushing/pulling) information relevant
202: to hosts.tab.
203: </description>
204: <note>
205: </note>
206: </file>
207: <file>
208: <source>loncom/build/check-rpms</source>
209: <target dist='default'>check-rpms</target>
210: <categoryname>system file</categoryname>
211: <description>
212: script for checking RPMS against an RPM repository
213: </description>
214: <note>
215: </note>
216: </file>
217: <file>
218: <source>loncom/build/distprobe</source>
219: <target dist='default'>distprobe</target>
220: <categoryname>system file</categoryname>
221: <description>
222: for probing operating system flavor and version
223: </description>
224: <note>
225: </note>
226: </file>
227: <file>
228: <source>loncom/build/doc_template.pl</source>
229: <target dist='default'>doc_template.pl</target>
230: <categoryname>system file</categoryname>
231: <description>
232: for making fancy install.lon-capa.org pages
233: </description>
234: <note>
235: </note>
236: </file>
237: <file>
238: <source>loncom/build/filecompare.pl</source>
239: <target dist='default'>filecompare.pl</target>
240: <categoryname>system file</categoryname>
241: <description>
242: rigorously compare many different values associated between files
243: </description>
244: <note>
245: </note>
246: </file>
247: <file>
248: <source>loncom/build/loncaparestoreconfigurations</source>
249: <target dist='default'>loncaparestoreconfigurations</target>
250: <categoryname>system file</categoryname>
251: <description>
252: intelligently restore configuration values
253: </description>
254: <note>
255: </note>
256: </file>
257: <file>
258: <source>loncom/build/lpml.dtd</source>
259: <target dist='default'>lpml.dtd</target>
260: <categoryname>system file</categoryname>
261: <description>
262: DocumentType for LPML
263: </description>
264: <note>
265: </note>
266: </file>
267: <file>
268: <source>loncom/build/lpml_html_posteval.pl</source>
269: <target dist='default'>lpml_html_posteval.pl</target>
270: <categoryname>system file</categoryname>
271: <description>
272: </description>
273: <note>
274: </note>
275: </file>
276: <file>
277: <source>loncom/build/lpml_parse.pl</source>
278: <target dist='default'>lpml_parse.pl</target>
279: <categoryname>system file</categoryname>
280: <description>
281: parse apart the loncapafiles.lpml and buildfiles.lpml
282: </description>
283: <note>
284: </note>
285: </file>
286: <file>
287: <source>loncom/build/make_domain_coordinator.pl</source>
288: <target dist='default'>make_domain_coordinator.pl</target>
289: <categoryname>system file</categoryname>
290: <description>
291: make a domain coordinator on a new LON-CAPA system
292: </description>
293: <note>
294: </note>
295: </file>
296: <file>
297: <source>loncom/build/piml.dtd</source>
298: <target dist='default'>piml.dtd</target>
299: <categoryname>system file</categoryname>
300: <description>
301: DocumentType definition for PIML (part of the LPML system)
302: </description>
303: <note>
304: </note>
305: </file>
306: <file>
307: <source>loncom/build/piml_parse.pl</source>
308: <target dist='default'>piml_parse.pl</target>
309: <categoryname>system file</categoryname>
310: <description>
311: parse a PIML file
312: </description>
313: <note>
314: </note>
315: </file>
316: <file>
317: <source>loncom/build/pod2html.sh</source>
318: <target dist='default'>pod2html.sh</target>
319: <categoryname>system file</categoryname>
320: <description>
321: make HTML documentation pages
322: </description>
323: <note>
324: </note>
325: </file>
326: <file>
327: <source>loncom/build/pod2man.sh</source>
328: <target dist='default'>pod2man.sh</target>
329: <categoryname>system file</categoryname>
330: <description>
331: make UNIX-style manual pages
332: </description>
333: <note>
334: </note>
335: </file>
336: <file>
337: <source>loncom/build/verify.pl</source>
338: <target dist='default'>verify.pl</target>
339: <categoryname>system file</categoryname>
340: <description>
341: wraps around filecompare.pl for posteval LPML statements
342: </description>
343: <note>
344: </note>
345: </file>
346: <file>
347: <source>loncom/build/verifymodown.pl</source>
348: <target dist='default'>verifymodown.pl</target>
349: <categoryname>system file</categoryname>
350: <description>
351: double-checks modification and ownership on files
352: </description>
353: <note>
354: </note>
355: </file>
356: <file>
357: <source>loncom/build/xfml.dtd</source>
358: <target dist='default'>xfml.dtd</target>
359: <categoryname>system file</categoryname>
360: <description>
361: DocumentType definition for XFML (part of the LPML system)
362: </description>
363: <note>
364: </note>
365: </file>
366: <file>
367: <source>loncom/build/xfml_parse.pl</source>
368: <target dist='default'>xfml_parse.pl</target>
369: <categoryname>system file</categoryname>
370: <description>
371: parses XFML files
372: </description>
373: <note>
374: </note>
375: </file>
376: </files>
377: </lpml>
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/back.gif){kind=icon}
Return to buildfiles.lpml CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [LON-CAPA] / doc / loncapafiles