Annotation of doc/loncapafiles/updatequery.piml, revision 1.18
1.2 harris41 1: <!-- updatequery.piml -->
1.1 harris41 2: <!-- Scott Harrison -->
3:
1.18 ! harris41 4: <!-- $Id: updatequery.piml,v 1.17 2002/06/21 05:30:31 harris41 Exp $ -->
1.1 harris41 5:
6: <!--
7:
8: This file is part of the LearningOnline Network with CAPA (LON-CAPA).
9:
10: LON-CAPA is free software; you can redistribute it and/or modify
11: it under the terms of the GNU General Public License as published by
12: the Free Software Foundation; either version 2 of the License, or
13: (at your option) any later version.
14:
15: LON-CAPA is distributed in the hope that it will be useful,
16: but WITHOUT ANY WARRANTY; without even the implied warranty of
17: MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18: GNU General Public License for more details.
19:
20: You should have received a copy of the GNU General Public License
21: along with LON-CAPA; if not, write to the Free Software
22: Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
23:
24: /home/httpd/html/adm/gpl.txt
25:
26: http://www.lon-capa.org/
27:
28: -->
29:
30: <piml>
31: <targetroot>/</targetroot>
32: <files>
33: <file>
1.4 harris41 34: <target dist='default'>/</target>
1.1 harris41 35: <perlscript mode='fg'>
1.4 harris41 36: $|=1;
1.1 harris41 37: print(<<END);
38:
39:
40: *********************************************
41: *********************************************
42: **** ****
43: **** LON-CAPA SYSTEM INFORMATION REQUEST ****
44: **** ****
45: **** Please respond to the choices below ****
46: **** ****
47: *********************************************
48: *********************************************
49:
50: END
1.4 harris41 51: sleep(3);
1.1 harris41 52: </perlscript>
53: </file>
54: <file>
1.10 harris41 55: <target dist='default'>/home/httpd/lonTabs/hosts.tab</target>
1.1 harris41 56: <perlscript mode='fg'>
1.4 harris41 57: $|=1;
1.1 harris41 58: unless (-e "<TARGET />") {
59: print(<<END);
60: WELCOME TO LON-CAPA!
61:
62: If you have questions, please visit http://install.lon-capa.org
1.5 harris41 63: or contact sharrison\@mail.lon-capa.org.
1.1 harris41 64:
65: ===============================================================================
1.4 harris41 66: The following 4 values are needed to configure LON-CAPA:
67: * Machine Role
1.8 harris41 68: * LON-CAPA Domain Name
69: * LON-CAPA Machine ID Name, and
1.1 harris41 70: * System Administration E-mail Address.
71: END
1.3 harris41 72:
1.4 harris41 73: open(OUT,'>/tmp/loncapa_updatequery.out');
74: close(OUT);
75:
1.3 harris41 76: # query for Machine Role
77: print(<<END);
78: **** Machine Role ****
79: Library server (recommended if first-time installation of LON-CAPA):
80: Servers that are repositories of authoritative educational resources.
81: These servers also provide the construction space by which instructors
82: assemble their classroom online material.
83: Access server:
84: Servers that load-balance high-traffic delivery of educational resources
85: over the world-wide web.
1.4 harris41 86: 1) Will this be a library server? (recommended if this is your first install)
1.3 harris41 87: 2) Or, will this be an access server?
88: END
1.4 harris41 89: my $flag=0;
90: my $r='';
91: my $lonRole;
92: while (!$flag) {
93: print "ENTER A CHOICE OF 1 or 2:\n";
94: my $choice=<>;
95: chomp($choice);
96: if ($choice==1) {
97: open(OUT,'>>/tmp/loncapa_updatequery.out');
98: print(OUT 'lonRole'."\t".'library'."\n");
99: close(OUT);
100: $lonRole='library';
101: $r='l';
102: $flag=1;
103: }
104: elsif ($choice==2) {
105: open(OUT,'>>/tmp/loncapa_updatequery.out');
106: print(OUT 'lonRole'."\t".'access'."\n");
107: close(OUT);
108: $lonRole='access';
109: $r='a';
110: $flag=2;
111: }
112: else {
113:
114: }
115: }
1.3 harris41 116:
117: # need to recommend a machine ID name (ipdomain.l.somenumber)
1.4 harris41 118: my $hostname=`hostname`; chomp($hostname);
119: my $ipdomain='';
120: if ($hostname=~/([^\.]*)\.([^\.]*)$/) {
121: $ipdomain=$1;
122: }
1.1 harris41 123:
124: print(<<END);
125:
1.8 harris41 126: **** Domain ****
127: [this does NOT need to correspond to internet address domains,
128: examples might be "msu" or "bionet" or "vermontcc"]
1.1 harris41 129: END
1.8 harris41 130:
131: # get domain name
1.1 harris41 132: # accept if valid, if not valid, tell user and repeat
1.4 harris41 133: $flag=0;
1.8 harris41 134: my $lonDefDomain;
1.4 harris41 135: while (!$flag) {
136: if ($ipdomain) {
137: print(<<END);
1.8 harris41 138: ENTER LONCAPA DOMAIN [$ipdomain]:
1.4 harris41 139: END
140: }
141: else {
142: print(<<END);
1.8 harris41 143: ENTER LONCAPA DOMAIN:
1.4 harris41 144: END
145: }
146: my $choice=<>;
147: chomp($choice);
1.18 ! harris41 148: my $bad_domain_flag=0;
! 149: my @bad_domain_names=('raw','userfiles','priv','adm','uploaded');
! 150: foreach my $bad (@bad_domain_names) {
! 151: $bad_domain_flag=1 if $choice eq $bad;
! 152: }
1.8 harris41 153: if ($ipdomain and $choice=~/^\s*$/) {
154: $choice=$ipdomain;
1.4 harris41 155: open(OUT,'>>/tmp/loncapa_updatequery.out');
1.8 harris41 156: print(OUT 'lonDefDomain'."\t".$choice."\n");
1.4 harris41 157: close(OUT);
1.8 harris41 158: $lonDefDomain=$choice;
1.4 harris41 159: $flag=1;
160: }
161: elsif ($choice!~/\_/ and $choice=~/^\w+$/) {
162: open(OUT,'>>/tmp/loncapa_updatequery.out');
1.8 harris41 163: print(OUT 'lonDefDomain'."\t".$choice."\n");
1.4 harris41 164: close(OUT);
1.8 harris41 165: $lonDefDomain=$choice;
166: $r='l';
1.4 harris41 167: $flag=1;
1.18 ! harris41 168: }
! 169: elsif ($bad_domain_flag) {
! 170: print "Invalid input ('$choice' conflicts with LON-CAPA namespace).\n";
! 171: print "Please try something different than '$choice'\n";
1.4 harris41 172: }
173: else {
174: print "Invalid input (only alphanumeric characters supported).\n";
175: }
176: }
1.1 harris41 177:
1.8 harris41 178: my $lonHostID;
179: if ($lonDefDomain) {
180: $lonHostID=$lonDefDomain.$r.int(1+rand(9)); # should be probably also detect
181: # against the hosts.tab
182: }
183:
1.1 harris41 184: print(<<END);
185:
1.8 harris41 186: **** Machine ID Name ****
187: [this does NOT need to correspond to internet address names;
188: this name MUST be unique to the whole LON-CAPA network;
189: we recommend that you use a name based off of your institution;
190: good examples: "msul1" or "bionetl1";
191: bad examples: "loncapabox" or "studentsinside"]
1.1 harris41 192: END
1.8 harris41 193: # get machine name
1.1 harris41 194: # accept if valid, if not valid, tell user and repeat
1.4 harris41 195: $flag=0;
196: while (!$flag) {
197: if ($ipdomain) {
198: print(<<END);
1.8 harris41 199: ENTER LONCAPA MACHINE ID [$lonHostID]:
1.4 harris41 200: END
201: }
202: else {
203: print(<<END);
1.8 harris41 204: ENTER LONCAPA MACHINE ID:
1.4 harris41 205: END
206: }
207: my $choice=<>;
208: chomp($choice);
1.8 harris41 209: if ($lonHostID and $choice=~/^\s*$/) {
210: $choice=$lonHostID;
1.4 harris41 211: open(OUT,'>>/tmp/loncapa_updatequery.out');
1.8 harris41 212: print(OUT 'lonHostID'."\t".$choice."\n");
1.4 harris41 213: close(OUT);
1.8 harris41 214: $lonHostID=$choice;
1.4 harris41 215: $flag=1;
216: }
217: elsif ($choice!~/\_/ and $choice=~/^\w+$/) {
218: open(OUT,'>>/tmp/loncapa_updatequery.out');
1.8 harris41 219: print(OUT 'lonHostID'."\t".$choice."\n");
1.4 harris41 220: close(OUT);
1.8 harris41 221: $lonHostID=$choice;
1.4 harris41 222: $flag=1;
223: }
224: else {
225: print "Invalid input (only alphanumeric characters supported).\n";
226: }
227: }
1.1 harris41 228:
1.4 harris41 229: # get e-mail address
230: # accept if valid, if not valid, tell user and repeat
231: $flag=0;
1.9 harris41 232: my $lonAdmEMail;
1.4 harris41 233: while (!$flag) {
1.1 harris41 234: print(<<END);
235:
236: **** System Administrator's E-mail ****
237: E-mail address of the person who will manage this machine
1.4 harris41 238: [should be in the form somebody\@somewhere]
1.1 harris41 239: ENTER E-MAIL ADDRESS:
240: END
241:
1.4 harris41 242: my $choice=<>;
243: chomp($choice);
244: if ($choice=~/\@/) {
245: open(OUT,'>>/tmp/loncapa_updatequery.out');
1.9 harris41 246: print(OUT 'lonAdmEMail'."\t".$choice."\n");
1.4 harris41 247: close(OUT);
1.9 harris41 248: $lonAdmEMail=$choice;
1.4 harris41 249: $flag=1;
250: }
251: else {
252: print "Invalid input (this needs to look like an e-mail address!).\n";
253: }
254: }
255:
1.1 harris41 256: # update loncapa.conf
1.7 harris41 257: my $confdir='/etc/httpd/conf/';
258: #my $confdir='';
1.5 harris41 259: my $filename='loncapa.conf';
260: my %perlvar;
261: if (-e "$confdir$filename") {
262: open(CONFIG,'<'.$confdir.$filename) or die("Can't read $confdir$filename");
263: while (my $configline=<CONFIG>) {
264: if ($configline =~ /^[^\#]*PerlSetVar/) {
265: my ($unused,$varname,$varvalue)=split(/\s+/,$configline);
266: chomp($varvalue);
1.12 harris41 267: $perlvar{$varname}=$varvalue if $varvalue!~/^\{\[\[\[\[/;
1.5 harris41 268: }
269: }
270: close(CONFIG);
271: }
272: $perlvar{'lonHostID'}=$lonHostID;
273: $perlvar{'lonDefDomain'}=$lonDefDomain;
1.9 harris41 274: $perlvar{'lonAdmEMail'}=$lonAdmEMail;
1.5 harris41 275: $perlvar{'lonRole'}=$lonRole;
1.16 harris41 276: unless ($perlvar{'lonLoadLim'} and $perlvar{'lonLoadLim'}!~/\{\[\[\[\[/) {
1.5 harris41 277: $perlvar{'lonLoadLim'}='2.00';
278: }
1.16 harris41 279: unless ($perlvar{'lonExpire'} and $perlvar{'lonExpire'}!~/\{\[\[\[\[/) {
1.5 harris41 280: $perlvar{'lonExpire'}='86400';
281: }
1.16 harris41 282: unless ($perlvar{'lonReceipt'} and $perlvar{'lonReceipt'}!~/\{\[\[\[\[/) {
1.5 harris41 283: my $lonReceipt='';
1.11 harris41 284: srand(time ^ $$ ^ unpack "%L*", `ps axww | gzip`);
1.5 harris41 285: my @alnum=(0..9,a..z);
286: foreach my $i (1..20) {
287: $lonReceipt.=$alnum[int(rand(36))];
288: }
289: $perlvar{'lonReceipt'}=$lonReceipt;
290: }
291: open(OUT,">$confdir$filename") or
292: die("Cannot output to $confdir$filename\n");
293: foreach my $key (keys %perlvar) {
294: my $value=$perlvar{$key};
295: print(OUT <<END);
296: PerlSetVar $key $value
297: END
298: }
299: close(OUT);
1.1 harris41 300: }
301: </perlscript>
302: </file>
303: <file>
1.5 harris41 304: <target dist='default'>/</target>
1.1 harris41 305: <perlscript mode='fg'>
306: # read values from loncapa.conf
1.7 harris41 307: my $confdir='/etc/httpd/conf/';
1.5 harris41 308: my $filename='loncapa.conf';
309: my %perlvar;
310: if (-e "$confdir$filename") {
311: open(CONFIG,'<'.$confdir.$filename) or
312: die("Can't read $confdir$filename");
313: while (my $configline=<CONFIG>) {
314: if ($configline =~ /^[^\#]*PerlSetVar/) {
315: my ($unused,$varname,$varvalue)=split(/\s+/,$configline);
316: chomp($varvalue);
317: $perlvar{$varname}=$varvalue;
318: }
319: }
320: close(CONFIG);
321: }
1.16 harris41 322: unless ($perlvar{'lonLoadLim'} and $perlvar{'lonLoadLim'}!~/\{\[\[\[\[/) {
323: $perlvar{'lonLoadLim'}='2.00';
324: }
325: unless ($perlvar{'lonExpire'} and $perlvar{'lonExpire'}!~/\{\[\[\[\[/) {
326: $perlvar{'lonExpire'}='86400';
327: }
328: unless ($perlvar{'lonReceipt'} and $perlvar{'lonReceipt'}!~/\{\[\[\[\[/) {
329: my $lonReceipt='';
330: srand(time ^ $$ ^ unpack "%L*", `ps axww | gzip`);
331: my @alnum=(0..9,a..z);
332: foreach my $i (1..20) {
333: $lonReceipt.=$alnum[int(rand(36))];
334: }
335: $perlvar{'lonReceipt'}=$lonReceipt;
336: }
1.7 harris41 337: my %perlvarstatic;
338: if (-e "${confdir}loncapa_apache.conf") {
339: open(CONFIG,'<'.$confdir.'loncapa_apache.conf') or
340: die("Can't read ${confdir}loncapa_apache.conf");
341: while (my $configline=<CONFIG>) {
342: if ($configline =~ /^[^\#]*PerlSetVar/) {
343: my ($unused,$varname,$varvalue)=split(/\s+/,$configline);
344: chomp($varvalue);
345: $perlvarstatic{$varname}=$varvalue;
346: }
347: }
348: close(CONFIG);
349: }
1.6 harris41 350: # implement editing logic below, interactively
351: # update loncapa.conf until 7 is entered
352:
353: $flag=0;
1.17 harris41 354:
1.6 harris41 355: while (!$flag) {
1.1 harris41 356: print(<<END);
357:
358: ===============================================================================
359: This is now the current configuration of your machine.
1.8 harris41 360: 1) Domain Name: $perlvar{'lonDefDomain'}
361: 2) Machine Name: $perlvar{'lonHostID'}
1.9 harris41 362: 3) System Administrator's E-mail Address: $perlvar{'lonAdmEMail'}
1.5 harris41 363: 4) Role: $perlvar{'lonRole'}
364: 5) Cache Expiration Time: $perlvar{'lonExpire'}
365: 6) Server Load: $perlvar{'lonLoadLim'}
1.1 harris41 366: 7) Everything is correct up above
1.6 harris41 367: END
1.17 harris41 368: my $hbug=-1;
369: my $dbug=-1;
370: {
371: my $v=$perlvar{'lonHostID'};
372: $hbug=0;
373: $hbug=1 if $v=~/\W/;
374: $hbug=1 if $v=~/\_/;
375: }
376: {
377: my $v=$1;
378: $dbug=0;
379: $dbug=1 if $v=~/\W/;
380: $dbug=1 if $v=~/\_/;
381: }
382:
383: if ($hbug) {
384: print "**** ERROR **** ".
385: "Invalid lonHostID (should only be letters and/or digits)\n";
386: }
387: if ($dbug) {
388: print "**** ERROR **** ".
389: "Invalid lonDefDomain (should only be letters and/or digits)\n";
390: }
391:
1.6 harris41 392: print(<<END);
1.1 harris41 393: ENTER A CHOICE OF 1-6 TO CHANGE, otherwise ENTER 7:
394: END
1.5 harris41 395: my $choice=<>;
396: chomp($choice);
1.6 harris41 397: if ($choice==1) {
398: print(<<END);
1.16 harris41 399: 1) Domain Name: $perlvar{'lonDefDomain'}
1.6 harris41 400: ENTER NEW VALUE:
401: END
402: my $choice2=<>;
403: chomp($choice2);
1.8 harris41 404: $perlvar{'lonDefDomain'}=$choice2;
1.6 harris41 405: }
406: elsif ($choice==2) {
407: print(<<END);
1.16 harris41 408: 2) Machine Name: $perlvar{'lonHostID'}
1.6 harris41 409: ENTER NEW VALUE:
410: END
411: my $choice2=<>;
412: chomp($choice2);
1.8 harris41 413: $perlvar{'lonHostID'}=$choice2;
1.6 harris41 414: }
415: elsif ($choice==3) {
416: print(<<END);
1.9 harris41 417: 3) System Administrator's E-mail Address: $perlvar{'lonAdmEMail'}
1.6 harris41 418: ENTER NEW VALUE:
419: END
420: my $choice2=<>;
421: chomp($choice2);
1.9 harris41 422: $perlvar{'lonAdmEMail'}=$choice2;
1.6 harris41 423: }
424: elsif ($choice==4) {
425: print(<<END);
426: 4) Role: $perlvar{'lonRole'}
427: ENTER NEW VALUE:
428: END
429: my $choice2=<>;
430: chomp($choice2);
431: $perlvar{'lonRole'}=$choice2;
432: }
433: elsif ($choice==5) {
434: print(<<END);
435: 5) Cache Expiration Time: $perlvar{'lonExpire'}
436: ENTER NEW VALUE:
437: END
438: my $choice2=<>;
439: chomp($choice2);
440: $perlvar{'lonExpire'}=$choice2;
441: }
442: elsif ($choice==6) {
443: print(<<END);
444: 6) Server Load: $perlvar{'lonLoadLim'}
445: ENTER NEW VALUE:
446: END
447: my $choice2=<>;
448: chomp($choice2);
449: $perlvar{'lonLoadLim'}=$choice2;
450: }
451: elsif ($choice==7) {
452: $flag=1;
453: }
454: else {
1.1 harris41 455:
1.6 harris41 456: }
457: }
1.7 harris41 458: open(OUT,">$confdir$filename") or
459: die("Cannot output to $confdir$filename\n");
460: foreach my $key (keys %perlvar) {
461: my $value=$perlvar{$key};
1.8 harris41 462: print(OUT <<END) unless $perlvarstatic{$key};
1.7 harris41 463: PerlSetVar $key $value
464: END
465: }
466: close(OUT);
1.1 harris41 467: </perlscript>
468: </file>
469: <file>
470: <target dist='default'>loncom/hosts.tab</target>
471: <perlscript mode='fg'>
472: unless (-l "<TARGET />") {
473: print(<<END);
474:
475: ===============================================================================
476: What hosts.tab would you like to have installed?
477: (hosts.tab is a listing of all other internet machines
478: that a server system considers to be valid server systems
479: on the LON-CAPA network)
480:
481: 1) PRODUCTION - you want to deliver courses today or sometime very soon
482: on this machine
1.5 harris41 483: 2) STAND-ALONE - you want this machine to run in 'stand-alone' mode and
484: not be connected to other LON-CAPA machines for now
485: 3) DEVELOPMENT - you want to play with or explore LON-CAPA
1.6 harris41 486: 4) PRESERVE the existing hosts.tab (/home/httpd/lonTabs/hosts.tab)
1.1 harris41 487:
488: END
489: # Option number 26 will install rawhide_hosts.tab, but
490: # the typical user does not want to be part of an intensive
491: # machine test cluster.
492:
493: # get input
494: # if valid then process, otherwise loop
1.6 harris41 495: my $hostname=`hostname`;chomp($hostname);
496: my $hostaddress=`hostname -i $hostname`;chomp($hostaddress);
497: $flag=0;
498: while (!$flag) {
499: print "ENTER 1, 2, 3, or 4:\n";
500: my $choice=<>;
501: chomp($choice);
1.15 harris41 502: $line2insert=<<END;
1.13 harris41 503: $perlvar{'lonHostID'}:$perlvar{'lonDefDomain'}:$perlvar{'lonRole'}:$hostname:$hostaddress
504: END
1.15 harris41 505: $date=`date -I`; chomp($date);
506: $lonHostID=$perlvar{'lonHostID'};
507: $lonHostID=~s/\W//g;
508: $lineexistflag=0;
509: $hostidexistflag=0;
1.6 harris41 510: if ($choice==1) {
1.15 harris41 511: $lonCluster='production'; $flag=1;
512: }
513: elsif ($choice==2) {
514: $lonCluster='standalone'; $flag=1;
515: open(OUT,'>../'.$lonCluster.'_hosts.tab') or
516: die('file generation error');
517: print(OUT $line2insert);
518: close(OUT);
519: }
520: elsif ($choice==3) {
521: $lonCluster='development'; $flag=1;
522: }
523: elsif ($choice==4) {
524: $lonCluster='existing'; $flag=1;
525: if (-e '/home/httpd/lonTabs/hosts.tab') {
526: `cp /home/httpd/lonTabs/hosts.tab ../existing_hosts.tab`;
527: }
528: else {
529: print <<END;
530: There is no existing /home/httpd/lonTabs/hosts.tab
531: END
532: die('');
533: }
534: }
535: elsif ($choice==26) {
536: $lonCluster='rawhide'; $flag=1;
537: }
538: if ($flag==1) {
1.6 harris41 539: `rm -f ../hosts.tab`;
1.15 harris41 540: open(IN,'<../'.$lonCluster.'_hosts.tab');
1.13 harris41 541: while(<IN>) {
542: if (/^$line2insert$/) {
543: $lineexistflag=1;
544: }
1.15 harris41 545: if (/^$lonHostID\:/) {
1.13 harris41 546: $hostidexistflag=1;
547: }
548: }
549: close(IN);
550: if ($hostidexistflag and !$lineexistflag) {
551: print <<END;
552: WARNING: $lonHostID already exists inside
1.15 harris41 553: loncapa/loncom/${lonCluster}_hosts.tab. The entry inside
554: ${lonCluster}_hosts.tab does not match your settings.
555: The entry inside ${lonCluster}_hosts.tab is being replaced
1.13 harris41 556: with your new values.
557: END
1.15 harris41 558: `grep -v "$lonHostID:" ../${lonCluster}_hosts.tab > ../new_${lonCluster}_hosts.tab`;
559: open(OUT,'>>../new_'.$lonCluster.'_hosts.tab') or
560: die("cannot open loncom/${lonCluster}_hosts.tab for output\n");
1.14 harris41 561: print(OUT $line2insert);
1.13 harris41 562: close(OUT);
1.15 harris41 563: `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;
1.13 harris41 564: # email appropriate message
1.15 harris41 565: `echo "REPLACE:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "REPLACE:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
1.13 harris41 566: }
567: elsif ($hostidexistflag and $lineexistflag) {
1.15 harris41 568: print <<END;
569: Entry exists in ${lonCluster}_hosts.tab.
570: END
571: `ln -s ${lonCluster}_hosts.tab ../hosts.tab`;
572: # email appropriate message
573: `echo "STABLEUPDATE:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "STABLEUPDATE:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
1.13 harris41 574: }
1.15 harris41 575: elsif (!$hostidexistflag and !$lineexistflag) {
576: print <<END;
577: New entry for $lonCluster.
1.6 harris41 578: END
1.15 harris41 579: `cat ../${lonCluster}_hosts.tab > ../new_${lonCluster}_hosts.tab`;
580: open(OUT,'>../new_'.$lonCluster.'_hosts.tab') or
581: die("cannot open loncom/${lonCluster}_hosts.tab for output\n");
582: print(OUT $line2insert);
583: close(OUT);
584: `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;
585: # email appropriate message
586: `echo "INSERT:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "INSERT:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
1.6 harris41 587: }
588: }
589: }
1.1 harris41 590:
591: }
592: </perlscript>
593: </file>
594: </files>
595: </piml>
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/back.gif){kind=icon}
Return to updatequery.piml CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [LON-CAPA] / doc / loncapafiles