Annotation of doc/loncapafiles/updatequery.piml, revision 1.42
1.2 harris41 1: <!-- updatequery.piml -->
1.1 harris41 2:
1.42 ! albertel 3: <!-- $Id: updatequery.piml,v 1.41 2005/08/15 17:53:33 albertel Exp $ -->
1.1 harris41 4:
5: <!--
6:
7: This file is part of the LearningOnline Network with CAPA (LON-CAPA).
8:
9: LON-CAPA is free software; you can redistribute it and/or modify
10: it under the terms of the GNU General Public License as published by
11: the Free Software Foundation; either version 2 of the License, or
12: (at your option) any later version.
13:
14: LON-CAPA is distributed in the hope that it will be useful,
15: but WITHOUT ANY WARRANTY; without even the implied warranty of
16: MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17: GNU General Public License for more details.
18:
19: You should have received a copy of the GNU General Public License
20: along with LON-CAPA; if not, write to the Free Software
21: Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22:
23: /home/httpd/html/adm/gpl.txt
24:
25: http://www.lon-capa.org/
26:
27: -->
28:
29: <piml>
30: <targetroot>/</targetroot>
31: <files>
32: <file>
1.4 harris41 33: <target dist='default'>/</target>
1.1 harris41 34: <perlscript mode='fg'>
1.4 harris41 35: $|=1;
1.1 harris41 36: print(<<END);
37:
38:
39: *********************************************
40: *********************************************
41: **** ****
42: **** LON-CAPA SYSTEM INFORMATION REQUEST ****
43: **** ****
44: **** Please respond to the choices below ****
45: **** ****
46: *********************************************
47: *********************************************
48:
49: END
1.4 harris41 50: sleep(3);
1.1 harris41 51: </perlscript>
52: </file>
53: <file>
1.22 albertel 54: <target dist='default'>loncom/hosts.tab</target>
55: <perlscript mode='fg'>
56: unless (-l "<TARGET />") {
57: print(<<END);
58:
59: ===============================================================================
1.30 www 60: Which cluster option would you like to have installed?
61: IMPORTANT: to take advantage of the cluster options 1) and 3),
62: you must contact lon-capa\@lon-capa.org.
63:
64: 1) PRODUCTION - you want to eventually connect this machine to the
65: LON-CAPA content sharing network. This setting is for
66: schools, colleges, and universities, that currently
67: are running - or in the future will run - courses
1.22 albertel 68: 2) STAND-ALONE - you want this machine to run in 'stand-alone' mode and
69: not be connected to other LON-CAPA machines for now
1.30 www 70: 3) DEVELOPMENT - you want to do software (not content!) development with
71: this workstation and eventually link it with the
72: workstations of other LON-CAPA software developers.
1.40 albertel 73: 4) RUNNING YOUR OWN CLUSTER - this machine is not in the standard LON-CAPA
74: clusters and won't be in the future and you want the existing
75: hosts.tab and domain.tab files to be left alone.
76: (This choice is unlikely what you want to select.)
1.22 albertel 77: END
78: # Option number 26 will install rawhide_hosts.tab, but
79: # the typical user does not want to be part of an intensive
80: # machine test cluster.
81:
82: # get input
83: # if valid then process, otherwise loop
84: $flag=0;
85: while (!$flag) {
86: print "ENTER 1, 2, 3, or 4:\n";
87: my $choice=<>;
88: chomp($choice);
89: if ($choice==1) {
90: $lonCluster='production'; $flag=1;
91: }
92: elsif ($choice==2) {
93: $lonCluster='standalone'; $flag=1;
94: }
95: elsif ($choice==3) {
96: $lonCluster='development'; $flag=1;
97: }
98: elsif ($choice==4) {
99: $lonCluster='existing'; $flag=1;
100: if (-e '/home/httpd/lonTabs/hosts.tab') {
101: `cp /home/httpd/lonTabs/hosts.tab ../existing_hosts.tab`;
102: }
103: else {
104: print <<END;
105: There is no existing /home/httpd/lonTabs/hosts.tab
106: END
107: die('');
108: }
1.27 albertel 109: if (-e '/home/httpd/lonTabs/domain.tab') {
110: `cp /home/httpd/lonTabs/domain.tab ../existing_domain.tab`;
111: }
112: else {
113: print <<END;
114: There is no existing /home/httpd/lonTabs/domain.tab
115: END
116: die('');
117: }
1.22 albertel 118: }
119: elsif ($choice==26) {
120: $lonCluster='rawhide'; $flag=1;
121: }
122: }
123: }
124: </perlscript>
125: </file>
126: <file>
1.10 harris41 127: <target dist='default'>/home/httpd/lonTabs/hosts.tab</target>
1.1 harris41 128: <perlscript mode='fg'>
1.4 harris41 129: $|=1;
1.20 albertel 130: my $domainDescription;
1.29 albertel 131: my $domainTabExtras;
1.1 harris41 132: unless (-e "<TARGET />") {
133: print(<<END);
134: WELCOME TO LON-CAPA!
135:
136: If you have questions, please visit http://install.lon-capa.org
1.32 raeburn 137: or contact helpdesk\@lon-capa.org.
1.1 harris41 138:
139: ===============================================================================
1.4 harris41 140: The following 4 values are needed to configure LON-CAPA:
141: * Machine Role
1.8 harris41 142: * LON-CAPA Domain Name
143: * LON-CAPA Machine ID Name, and
1.1 harris41 144: * System Administration E-mail Address.
1.32 raeburn 145: ===============================================================================
146:
147: In addition, a Support E-mail Address can also be included. If
148: an address is included then one of the options in the LON-CAPA
149: help menu will be a link to a form that a user will complete to
150: request LON-CAPA help.
151:
1.1 harris41 152: END
1.3 harris41 153:
1.4 harris41 154: open(OUT,'>/tmp/loncapa_updatequery.out');
155: close(OUT);
156:
1.3 harris41 157: # query for Machine Role
158: print(<<END);
159: **** Machine Role ****
160: Library server (recommended if first-time installation of LON-CAPA):
161: Servers that are repositories of authoritative educational resources.
162: These servers also provide the construction space by which instructors
163: assemble their classroom online material.
164: Access server:
165: Servers that load-balance high-traffic delivery of educational resources
166: over the world-wide web.
1.4 harris41 167: 1) Will this be a library server? (recommended if this is your first install)
1.3 harris41 168: 2) Or, will this be an access server?
169: END
1.4 harris41 170: my $flag=0;
171: my $r='';
172: my $lonRole;
173: while (!$flag) {
174: print "ENTER A CHOICE OF 1 or 2:\n";
175: my $choice=<>;
176: chomp($choice);
177: if ($choice==1) {
178: open(OUT,'>>/tmp/loncapa_updatequery.out');
179: print(OUT 'lonRole'."\t".'library'."\n");
180: close(OUT);
181: $lonRole='library';
182: $r='l';
183: $flag=1;
184: }
185: elsif ($choice==2) {
186: open(OUT,'>>/tmp/loncapa_updatequery.out');
187: print(OUT 'lonRole'."\t".'access'."\n");
188: close(OUT);
189: $lonRole='access';
190: $r='a';
191: $flag=2;
192: }
193: else {
194:
195: }
196: }
1.3 harris41 197:
198: # need to recommend a machine ID name (ipdomain.l.somenumber)
1.36 albertel 199: my $hostname=`hostname -f`; chomp($hostname);
1.4 harris41 200: my $ipdomain='';
201: if ($hostname=~/([^\.]*)\.([^\.]*)$/) {
202: $ipdomain=$1;
203: }
1.1 harris41 204:
205: print(<<END);
206:
1.8 harris41 207: **** Domain ****
208: [this does NOT need to correspond to internet address domains,
1.37 www 209: good examples might be "msu" or "bionet" or "vermontcc",
210: bad examples are "physics" (too general)
211: or "michiganstateuniversity" (too long)
212: or "msuedu" (internet domain, just make it "msu")
213: or "msuphysics" (only if there is a good reason to limit)
214: or "mydomain" (what is that?)
215: Please make this name short AND descriptive of your organization.
216: Note that the domain is very hard to change later.
217: Double-check with the LON-CAPA group at MSU if this domain is
218: going to be part of the main production cluster, since it needs
219: to be unique.]
1.1 harris41 220: END
1.8 harris41 221:
222: # get domain name
1.1 harris41 223: # accept if valid, if not valid, tell user and repeat
1.4 harris41 224: $flag=0;
1.8 harris41 225: my $lonDefDomain;
1.4 harris41 226: while (!$flag) {
227: if ($ipdomain) {
228: print(<<END);
1.8 harris41 229: ENTER LONCAPA DOMAIN [$ipdomain]:
1.4 harris41 230: END
231: }
232: else {
233: print(<<END);
1.8 harris41 234: ENTER LONCAPA DOMAIN:
1.4 harris41 235: END
236: }
237: my $choice=<>;
238: chomp($choice);
1.18 harris41 239: my $bad_domain_flag=0;
1.41 albertel 240: my @bad_domain_names=('res','raw','userfiles','priv','adm','uploaded',
241: 'editupload');
1.18 harris41 242: foreach my $bad (@bad_domain_names) {
243: $bad_domain_flag=1 if $choice eq $bad;
244: }
1.37 www 245: if ($choice=~/capa/i) {
246: $bad_domain_flag=1;
247: }
1.8 harris41 248: if ($ipdomain and $choice=~/^\s*$/) {
249: $choice=$ipdomain;
1.4 harris41 250: open(OUT,'>>/tmp/loncapa_updatequery.out');
1.8 harris41 251: print(OUT 'lonDefDomain'."\t".$choice."\n");
1.4 harris41 252: close(OUT);
1.8 harris41 253: $lonDefDomain=$choice;
1.4 harris41 254: $flag=1;
1.37 www 255: } elsif (length($choice)>12) {
256: print "Name too long\n";
257: } elsif (length($choice)<2) {
258: print "Name too short\n";
1.38 www 259: } elsif ($bad_domain_flag) {
260: print "Invalid input ('$choice' conflicts with LON-CAPA namespace).\n";
261: print "Please try something different than '$choice'\n";
1.37 www 262: } elsif ($choice!~/\_/ and $choice=~/^\w+$/) {
1.4 harris41 263: open(OUT,'>>/tmp/loncapa_updatequery.out');
1.8 harris41 264: print(OUT 'lonDefDomain'."\t".$choice."\n");
1.4 harris41 265: close(OUT);
1.8 harris41 266: $lonDefDomain=$choice;
267: $r='l';
1.4 harris41 268: $flag=1;
1.37 www 269: } else {
1.4 harris41 270: print "Invalid input (only alphanumeric characters supported).\n";
271: }
272: }
1.1 harris41 273:
1.20 albertel 274:
275: # get domain description
276: # accept if valid, if not valid, tell user and repeat
277: $flag=0;
278:
279: while (!$flag) {
280: print(<<END);
281:
282: **** Domain Description ****
283: String describing the domain, to be shown to users.
284: [Example, msu is Michigan State University]
285: ENTER DOMAIN DESCRIPTION:
286: END
287:
288: my $choice=<>;
289: chomp($choice);
290: if ($choice!~/:/) {
291: open(OUT,'>>/tmp/loncapa_updatequery.out');
292: print(OUT 'domainDescription'."\t".$choice."\n");
293: close(OUT);
294: $domainDescription=$choice;
295: $flag=1;
296: }
297: else {
298: print "Invalid input (no ':' allowed).\n";
299: }
300: }
301:
1.8 harris41 302: my $lonHostID;
303: if ($lonDefDomain) {
304: $lonHostID=$lonDefDomain.$r.int(1+rand(9)); # should be probably also detect
305: # against the hosts.tab
306: }
307:
1.1 harris41 308: print(<<END);
309:
1.8 harris41 310: **** Machine ID Name ****
311: [this does NOT need to correspond to internet address names;
312: this name MUST be unique to the whole LON-CAPA network;
313: we recommend that you use a name based off of your institution;
1.37 www 314: good examples: "msul1" or "bioneta2";
315: bad examples: "loncapabox" or "studentsinside".
316: Note that machine names are very hard to change later.]
1.1 harris41 317: END
1.8 harris41 318: # get machine name
1.1 harris41 319: # accept if valid, if not valid, tell user and repeat
1.4 harris41 320: $flag=0;
321: while (!$flag) {
322: if ($ipdomain) {
323: print(<<END);
1.8 harris41 324: ENTER LONCAPA MACHINE ID [$lonHostID]:
1.4 harris41 325: END
326: }
327: else {
328: print(<<END);
1.8 harris41 329: ENTER LONCAPA MACHINE ID:
1.4 harris41 330: END
331: }
332: my $choice=<>;
333: chomp($choice);
1.37 www 334: if ($choice=~/capa/i) {
335: print "Invalid input (names containing 'capa' are reserved).\n";
336: } elsif ($lonHostID and $choice=~/^\s*$/) {
1.8 harris41 337: $choice=$lonHostID;
1.4 harris41 338: open(OUT,'>>/tmp/loncapa_updatequery.out');
1.8 harris41 339: print(OUT 'lonHostID'."\t".$choice."\n");
1.4 harris41 340: close(OUT);
1.8 harris41 341: $lonHostID=$choice;
1.4 harris41 342: $flag=1;
1.37 www 343: } elsif (length($choice)>15) {
344: print "Name too long\n";
345: } elsif (length($choice)<4) {
346: print "Name too short\n";
347: } elsif ($choice!~/\_/ and $choice=~/^\w+$/) {
1.4 harris41 348: open(OUT,'>>/tmp/loncapa_updatequery.out');
1.8 harris41 349: print(OUT 'lonHostID'."\t".$choice."\n");
1.4 harris41 350: close(OUT);
1.8 harris41 351: $lonHostID=$choice;
1.4 harris41 352: $flag=1;
1.37 www 353: } else {
1.4 harris41 354: print "Invalid input (only alphanumeric characters supported).\n";
355: }
356: }
1.1 harris41 357:
1.32 raeburn 358: # get admin e-mail address
1.4 harris41 359: # accept if valid, if not valid, tell user and repeat
360: $flag=0;
1.9 harris41 361: my $lonAdmEMail;
1.4 harris41 362: while (!$flag) {
1.1 harris41 363: print(<<END);
364:
365: **** System Administrator's E-mail ****
366: E-mail address of the person who will manage this machine
1.4 harris41 367: [should be in the form somebody\@somewhere]
1.32 raeburn 368: ENTER ADMIN E-MAIL ADDRESS:
1.1 harris41 369: END
370:
1.4 harris41 371: my $choice=<>;
372: chomp($choice);
373: if ($choice=~/\@/) {
374: open(OUT,'>>/tmp/loncapa_updatequery.out');
1.9 harris41 375: print(OUT 'lonAdmEMail'."\t".$choice."\n");
1.4 harris41 376: close(OUT);
1.9 harris41 377: $lonAdmEMail=$choice;
1.4 harris41 378: $flag=1;
379: }
380: else {
381: print "Invalid input (this needs to look like an e-mail address!).\n";
382: }
383: }
384:
1.32 raeburn 385:
386: # get support e-mail address
387: # accept if valid, if not valid, tell user and repeat
388: $flag=0;
389: my $lonSupportEMail;
390: while (!$flag) {
391: print(<<END);
392:
393: **** Support E-mail ****
394: E-mail address of the person who will receive
395: help requests from LON-CAPA users who access
396: the system via this server. If the address is left blank,
397: then a help support form will not be displayed
398: as part of the help menu.
399: [should be in the form somebody\@somewhere]
400: ENTER SUPPORT E-MAIL ADDRESS:
401: END
402:
403: my $choice=<>;
404: chomp($choice);
405: $choice =~ s/\s//g;
1.33 albertel 406: if ( ($choice=~/\@/) || $choice eq '') {
1.32 raeburn 407: open(OUT,'>>/tmp/loncapa_updatequery.out');
408: print(OUT 'lonSupportEMail'."\t".$choice."\n");
409: close(OUT);
410: $lonSupportEMail=$choice;
411: $flag=1;
412: }
413: else {
414: print "Invalid input (this either needs to be blank, or look like an e-mail address!).\n";
415: }
416: }
417:
418:
1.1 harris41 419: # update loncapa.conf
1.7 harris41 420: my $confdir='/etc/httpd/conf/';
421: #my $confdir='';
1.5 harris41 422: my $filename='loncapa.conf';
423: my %perlvar;
424: if (-e "$confdir$filename") {
425: open(CONFIG,'<'.$confdir.$filename) or die("Can't read $confdir$filename");
426: while (my $configline=<CONFIG>) {
427: if ($configline =~ /^[^\#]*PerlSetVar/) {
428: my ($unused,$varname,$varvalue)=split(/\s+/,$configline);
429: chomp($varvalue);
1.12 harris41 430: $perlvar{$varname}=$varvalue if $varvalue!~/^\{\[\[\[\[/;
1.5 harris41 431: }
432: }
433: close(CONFIG);
434: }
435: $perlvar{'lonHostID'}=$lonHostID;
436: $perlvar{'lonDefDomain'}=$lonDefDomain;
1.9 harris41 437: $perlvar{'lonAdmEMail'}=$lonAdmEMail;
1.32 raeburn 438: $perlvar{'lonSupportEMail'}=$lonSupportEMail;
1.5 harris41 439: $perlvar{'lonRole'}=$lonRole;
1.16 harris41 440: unless ($perlvar{'lonLoadLim'} and $perlvar{'lonLoadLim'}!~/\{\[\[\[\[/) {
1.5 harris41 441: $perlvar{'lonLoadLim'}='2.00';
442: }
1.25 albertel 443: unless ($perlvar{'lonUserLoadLim'} and $perlvar{'lonUserLoadLim'}!~/\{\[\[\[\[/) {
444: $perlvar{'lonUserLoadLim'}='0';
445: }
1.16 harris41 446: unless ($perlvar{'lonExpire'} and $perlvar{'lonExpire'}!~/\{\[\[\[\[/) {
1.5 harris41 447: $perlvar{'lonExpire'}='86400';
448: }
1.16 harris41 449: unless ($perlvar{'lonReceipt'} and $perlvar{'lonReceipt'}!~/\{\[\[\[\[/) {
1.5 harris41 450: my $lonReceipt='';
1.11 harris41 451: srand(time ^ $$ ^ unpack "%L*", `ps axww | gzip`);
1.5 harris41 452: my @alnum=(0..9,a..z);
453: foreach my $i (1..20) {
454: $lonReceipt.=$alnum[int(rand(36))];
455: }
456: $perlvar{'lonReceipt'}=$lonReceipt;
457: }
458: open(OUT,">$confdir$filename") or
459: die("Cannot output to $confdir$filename\n");
460: foreach my $key (keys %perlvar) {
461: my $value=$perlvar{$key};
462: print(OUT <<END);
463: PerlSetVar $key $value
464: END
465: }
466: close(OUT);
1.1 harris41 467: }
468: </perlscript>
469: </file>
470: <file>
1.5 harris41 471: <target dist='default'>/</target>
1.1 harris41 472: <perlscript mode='fg'>
1.31 albertel 473: sub securesetting {
474: my (%perlvar)=@_;
475: my $securestatus='unknown';
476: my $securenum='';
477: if ( $perlvar{'loncAllowInsecure'}&& $perlvar{'londAllowInsecure'}) {
478: $securestatus='no'; $securenum='4';
479: } elsif ( $perlvar{'loncAllowInsecure'}&& !$perlvar{'londAllowInsecure'}) {
480: $securestatus='lond'; $securenum='3';
481: } elsif (!$perlvar{'loncAllowInsecure'}&& $perlvar{'londAllowInsecure'}) {
482: $securestatus='lonc'; $securenum='2';
483: } elsif (!$perlvar{'loncAllowInsecure'}&& !$perlvar{'londAllowInsecure'}) {
484: $securestatus='yes (lond and lonc)'; $securenum='1';
485: }
486: return ($securestatus,$securenum);
487: }
1.1 harris41 488: # read values from loncapa.conf
1.7 harris41 489: my $confdir='/etc/httpd/conf/';
1.5 harris41 490: my $filename='loncapa.conf';
491: my %perlvar;
1.31 albertel 492: my ($securestatus,$securenum);
1.5 harris41 493: if (-e "$confdir$filename") {
494: open(CONFIG,'<'.$confdir.$filename) or
495: die("Can't read $confdir$filename");
496: while (my $configline=<CONFIG>) {
497: if ($configline =~ /^[^\#]*PerlSetVar/) {
498: my ($unused,$varname,$varvalue)=split(/\s+/,$configline);
499: chomp($varvalue);
500: $perlvar{$varname}=$varvalue;
501: }
502: }
503: close(CONFIG);
504: }
1.16 harris41 505: unless ($perlvar{'lonLoadLim'} and $perlvar{'lonLoadLim'}!~/\{\[\[\[\[/) {
506: $perlvar{'lonLoadLim'}='2.00';
507: }
1.25 albertel 508: unless ($perlvar{'lonUserLoadLim'} and $perlvar{'lonUserLoadLim'}!~/\{\[\[\[\[/) {
509: $perlvar{'lonUserLoadLim'}='0';
510: }
1.16 harris41 511: unless ($perlvar{'lonExpire'} and $perlvar{'lonExpire'}!~/\{\[\[\[\[/) {
512: $perlvar{'lonExpire'}='86400';
513: }
1.31 albertel 514: unless ($perlvar{'londAllowInsecure'} and $perlvar{'londAllowInsecure'}!~/\{\[\[\[\[/) {
515: $perlvar{'londAllowInsecure'}='1';
516: }
517: unless ($perlvar{'loncAllowInsecure'} and $perlvar{'loncAllowInsecure'}!~/\{\[\[\[\[/) {
518: $perlvar{'loncAllowInsecure'}='1';
519: }
520: ($securestatus,$securenum)=&securesetting(%perlvar);
1.16 harris41 521: unless ($perlvar{'lonReceipt'} and $perlvar{'lonReceipt'}!~/\{\[\[\[\[/) {
522: my $lonReceipt='';
523: srand(time ^ $$ ^ unpack "%L*", `ps axww | gzip`);
524: my @alnum=(0..9,a..z);
525: foreach my $i (1..20) {
526: $lonReceipt.=$alnum[int(rand(36))];
527: }
528: $perlvar{'lonReceipt'}=$lonReceipt;
529: }
1.7 harris41 530: my %perlvarstatic;
531: if (-e "${confdir}loncapa_apache.conf") {
532: open(CONFIG,'<'.$confdir.'loncapa_apache.conf') or
533: die("Can't read ${confdir}loncapa_apache.conf");
534: while (my $configline=<CONFIG>) {
535: if ($configline =~ /^[^\#]*PerlSetVar/) {
536: my ($unused,$varname,$varvalue)=split(/\s+/,$configline);
537: chomp($varvalue);
538: $perlvarstatic{$varname}=$varvalue;
539: }
540: }
541: close(CONFIG);
542: }
1.23 albertel 543: if (!$domainDescription && $lonCluster ne 'existing') {
1.27 albertel 544: open(IN,'<../'.$lonCluster.'_domain.tab');
1.22 albertel 545: while(<IN>) {
1.27 albertel 546: if (/^$perlvar{'lonDefDomain'}\:/) {
1.29 albertel 547: (undef,$domainDescription,$domainTabExtras)=split(/:/,$_,3);
1.22 albertel 548: chomp($domainDescription);
1.29 albertel 549: chomp($domainTabExtras);
1.22 albertel 550: last;
551: }
552: }
1.23 albertel 553: close(IN);
1.22 albertel 554: }
1.23 albertel 555: if (!$domainDescription) {
1.27 albertel 556: open(IN,'</home/httpd/lonTabs/domain.tab');
1.23 albertel 557: while(<IN>) {
1.27 albertel 558: if (/^$perlvar{'lonDefDomain'}\:/) {
1.29 albertel 559: (undef,$domainDescription,$domainTabExtras)=split(/:/,$_,3);
1.23 albertel 560: chomp($domainDescription);
1.29 albertel 561: chomp($domainTabExtras);
1.23 albertel 562: last;
563: }
564: }
565: close(IN);
566: }
567:
1.6 harris41 568: # implement editing logic below, interactively
1.22 albertel 569: # update loncapa.conf until 8 is entered
1.6 harris41 570:
571: $flag=0;
1.17 harris41 572:
1.6 harris41 573: while (!$flag) {
1.1 harris41 574: print(<<END);
575:
576: ===============================================================================
577: This is now the current configuration of your machine.
1.31 albertel 578: 1) Domain Name: $perlvar{'lonDefDomain'}
579: 2) Domain Description: $domainDescription
580: 3) Machine Name: $perlvar{'lonHostID'}
581: 4) System Administrator's E-mail Address: $perlvar{'lonAdmEMail'}
1.33 albertel 582: 5) Support E-mail Address: $perlvar{'lonSupportEMail'}
1.32 raeburn 583: 6) Role: $perlvar{'lonRole'}
584: 7) Cache Expiration Time: $perlvar{'lonExpire'}
585: 8) Server Load: $perlvar{'lonLoadLim'}
586: 9) User Load: $perlvar{'lonUserLoadLim'}
587: 10) Allow only secure connections: $securestatus
588: 11) Everything is correct up above
1.6 harris41 589: END
1.38 www 590:
591: my $error='';
592: foreach my $v ($perlvar{'lonDefDomain'},$perlvar{'lonHostID'}) {
593: if (length($v)>16) { $error.="\nName $v too long"; }
594: if (length($v)<2) { $error.="\nName $v too short"; }
1.39 albertel 595: if ($v=~/capa/i) {
596: if ($v!~/^oucapa\d+$/ &&
597: ($v!~/^capa\d+$/ && $perlvar{'lonDefDomain'} eq 'uwsp')) {
598: $error.="\nName $v contains 'capa'";
599: }
600: }
1.41 albertel 601: foreach my $bad ('res','raw','userfiles','priv','adm','uploaded',
602: 'editupload') {
1.38 www 603: $error.="\nName $v reserved." if $v eq $bad;
604: }
605: if ($v=~/\W/) { $error.="\nName $v contains special characters"; }
606: }
1.42 ! albertel 607: if ($domainDescription!~/^[\(\)\-\w\s,]+$/) {
1.38 www 608: $error.="\nDomain Description contains special characters";
609: }
610: foreach my $v ($perlvar{'lonExpire'},$perlvar{'lonLoadLim'}) {
611: unless ($v=~/^[\d+\.]+$/) { $error.="\nNumber expected instead of $v"; }
612: }
613: unless (($perlvar{'lonRole'} eq 'library') || ($perlvar{'lonRole'} eq 'access')) {
614: $error.="\nInvalid Role";
1.17 harris41 615: }
1.38 www 616: if ($error) { print "\n*** ERRORS: $error\n"; }
1.6 harris41 617: print(<<END);
1.32 raeburn 618: ENTER A CHOICE OF 1-10 TO CHANGE, otherwise ENTER 11:
1.1 harris41 619: END
1.5 harris41 620: my $choice=<>;
621: chomp($choice);
1.6 harris41 622: if ($choice==1) {
623: print(<<END);
1.16 harris41 624: 1) Domain Name: $perlvar{'lonDefDomain'}
1.20 albertel 625: ENTER NEW VALUE (this is an internal value used to identify a group of
626: LON-CAPA machines, it must be alphanumerical, we suggest
627: using a part of your actual DNS domain. For example, for
628: the machine loncapa.msu.edu, we set the Domain to msu):
1.6 harris41 629: END
630: my $choice2=<>;
631: chomp($choice2);
1.8 harris41 632: $perlvar{'lonDefDomain'}=$choice2;
1.6 harris41 633: }
634: elsif ($choice==2) {
635: print(<<END);
1.20 albertel 636: 2) Domain Description: $domainDescription
637: ENTER NEW VALUE (this should be a string that describes your domain, spaces
638: and punctuation are fine except for ':'):
639: END
640: my $choice2=<>;
641: chomp($choice2);
642: $domainDescription=$choice2;
643: }
644: elsif ($choice==3) {
645: print(<<END);
646: 3) Machine Name: $perlvar{'lonHostID'}
647: ENTER NEW VALUE (this will be the name of the machine in the LON-CAPA network
648: it cannot contain any of '_' '-' '.' or ':'. We suggest that
649: if you are in the domain 'example' and are the first library
650: server you enter 'examplel1') :
1.6 harris41 651: END
652: my $choice2=<>;
653: chomp($choice2);
1.8 harris41 654: $perlvar{'lonHostID'}=$choice2;
1.6 harris41 655: }
1.20 albertel 656: elsif ($choice==4) {
1.6 harris41 657: print(<<END);
1.20 albertel 658: 4) System Administrator's E-mail Address: $perlvar{'lonAdmEMail'}
1.6 harris41 659: ENTER NEW VALUE:
660: END
661: my $choice2=<>;
662: chomp($choice2);
1.9 harris41 663: $perlvar{'lonAdmEMail'}=$choice2;
1.6 harris41 664: }
1.20 albertel 665: elsif ($choice==5) {
1.6 harris41 666: print(<<END);
1.32 raeburn 667: 5) Support E-mail Address: $perlvar{'lonSupportEMail'}
668: ENTER NEW VALUE:
669: END
670: my $choice2=<>;
671: chomp($choice2);
672: $perlvar{'lonSupportEMail'}=$choice2;
673: }
674: elsif ($choice==6) {
675: print(<<END);
676: 6) Role: $perlvar{'lonRole'}
1.20 albertel 677: ENTER NEW VALUE (this should be either 'access' or 'library'
678: if in doubt select 'library'):
1.6 harris41 679: END
680: my $choice2=<>;
681: chomp($choice2);
682: $perlvar{'lonRole'}=$choice2;
683: }
1.32 raeburn 684: elsif ($choice==7) {
1.6 harris41 685: print(<<END);
1.32 raeburn 686: 7) Cache Expiration Time: $perlvar{'lonExpire'}
1.20 albertel 687: ENTER NEW VALUE (in seconds, 86400 is a reasonable value):
1.6 harris41 688: END
689: my $choice2=<>;
690: chomp($choice2);
691: $perlvar{'lonExpire'}=$choice2;
692: }
1.32 raeburn 693: elsif ($choice==8) {
1.6 harris41 694: print(<<END);
1.32 raeburn 695: 8) Server Load: $perlvar{'lonLoadLim'}
1.6 harris41 696: ENTER NEW VALUE:
697: END
698: my $choice2=<>;
699: chomp($choice2);
700: $perlvar{'lonLoadLim'}=$choice2;
701: }
1.32 raeburn 702: elsif ($choice==9) {
1.25 albertel 703: print(<<END);
1.32 raeburn 704: 9) User Load: $perlvar{'lonUserLoadLim'}
1.25 albertel 705: Numer of users that can login before machine is 'overloaded'
1.26 albertel 706: ENTER NEW VALUE (integer value, 0 means there is no limit):
1.25 albertel 707: END
708: my $choice2=<>;
709: chomp($choice2);
710: $perlvar{'lonUserLoadLim'}=$choice2;
711: }
1.32 raeburn 712: elsif ($choice==10) {
1.31 albertel 713: print(<<END);
1.32 raeburn 714: 10) Allow only secure connections: $securestatus
1.31 albertel 715: The Lon-CAPA communication daemons lonc and lond can be configured to
716: allow only secure connections by default.
717:
718: POSSIBLE CHOICES:
719: 1) allow only secure connections and don't connect to machines that
720: can not be connected to securely
721: 2) allow only secure connections but allow this machine to connect to
722: machines that don't support secure connections
723: 3) allow insecure connections to this machine but only allow connections
724: to machines that support secure connections
725: 4) allow insecure connections
726: ENTER NEW VALUE (currenly $securenum):
727: END
728: my $choice2=<>;
729: chomp($choice2);
730: if ($choice2 eq '1') {
731: $perlvar{'loncAllowInsecure'}=0;$perlvar{'londAllowInsecure'}=0;
732: } elsif ($choice2 eq '2') {
733: $perlvar{'loncAllowInsecure'}=0;$perlvar{'londAllowInsecure'}=1;
734: } elsif ($choice2 eq '3') {
735: $perlvar{'loncAllowInsecure'}=1;$perlvar{'londAllowInsecure'}=0;
736: } elsif ($choice2 eq '4') {
737: $perlvar{'loncAllowInsecure'}=1;$perlvar{'londAllowInsecure'}=1;
738: }
739: ($securestatus,$securenum)=&securesetting(%perlvar);
740: }
1.38 www 741: elsif (($choice==11) && (!$error)) {
1.6 harris41 742: $flag=1;
743: }
744: else {
1.38 www 745: print "Invalid input.\n";
1.6 harris41 746: }
747: }
1.7 harris41 748: open(OUT,">$confdir$filename") or
749: die("Cannot output to $confdir$filename\n");
750: foreach my $key (keys %perlvar) {
751: my $value=$perlvar{$key};
1.8 harris41 752: print(OUT <<END) unless $perlvarstatic{$key};
1.7 harris41 753: PerlSetVar $key $value
754: END
755: }
756: close(OUT);
1.1 harris41 757: </perlscript>
758: </file>
759: <file>
760: <target dist='default'>loncom/hosts.tab</target>
761: <perlscript mode='fg'>
762: unless (-l "<TARGET />") {
1.36 albertel 763: my $hostname=`hostname -f`;chomp($hostname);
1.15 harris41 764: $date=`date -I`; chomp($date);
765: $lonHostID=$perlvar{'lonHostID'};
766: $lonHostID=~s/\W//g;
767: $lineexistflag=0;
768: $hostidexistflag=0;
1.22 albertel 769: $line2insert=<<END;
1.35 albertel 770: $perlvar{'lonHostID'}:$perlvar{'lonDefDomain'}:$perlvar{'lonRole'}:$hostname
1.15 harris41 771: END
1.29 albertel 772: $domaininsert="$perlvar{'lonDefDomain'}:$domainDescription:$domainTabExtras\n";
1.23 albertel 773: if ($lonCluster eq 'standalone') {
774: open(OUT,'>../'.$lonCluster.'_hosts.tab') or
775: die('file generation error');
776: print(OUT $line2insert);
777: close(OUT);
1.27 albertel 778: open(OUT,'>../'.$lonCluster.'_domain.tab') or
779: die('file generation error');
780: print(OUT $domaininsert);
781: close(OUT);
1.23 albertel 782: }
1.15 harris41 783: if ($flag==1) {
1.6 harris41 784: `rm -f ../hosts.tab`;
1.15 harris41 785: open(IN,'<../'.$lonCluster.'_hosts.tab');
1.13 harris41 786: while(<IN>) {
787: if (/^$line2insert$/) {
788: $lineexistflag=1;
789: }
1.15 harris41 790: if (/^$lonHostID\:/) {
1.13 harris41 791: $hostidexistflag=1;
792: }
793: }
794: close(IN);
795: if ($hostidexistflag and !$lineexistflag) {
796: print <<END;
797: WARNING: $lonHostID already exists inside
1.15 harris41 798: loncapa/loncom/${lonCluster}_hosts.tab. The entry inside
799: ${lonCluster}_hosts.tab does not match your settings.
800: The entry inside ${lonCluster}_hosts.tab is being replaced
1.13 harris41 801: with your new values.
802: END
1.15 harris41 803: `grep -v "$lonHostID:" ../${lonCluster}_hosts.tab > ../new_${lonCluster}_hosts.tab`;
804: open(OUT,'>>../new_'.$lonCluster.'_hosts.tab') or
805: die("cannot open loncom/${lonCluster}_hosts.tab for output\n");
1.14 harris41 806: print(OUT $line2insert);
1.13 harris41 807: close(OUT);
1.15 harris41 808: `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;
1.13 harris41 809: # email appropriate message
1.34 albertel 810: `echo "REPLACE:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "REPLACE:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
1.13 harris41 811: }
812: elsif ($hostidexistflag and $lineexistflag) {
1.15 harris41 813: print <<END;
814: Entry exists in ${lonCluster}_hosts.tab.
815: END
816: `ln -s ${lonCluster}_hosts.tab ../hosts.tab`;
817: # email appropriate message
818: `echo "STABLEUPDATE:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "STABLEUPDATE:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
1.13 harris41 819: }
1.15 harris41 820: elsif (!$hostidexistflag and !$lineexistflag) {
821: print <<END;
822: New entry for $lonCluster.
1.6 harris41 823: END
1.15 harris41 824: `cat ../${lonCluster}_hosts.tab > ../new_${lonCluster}_hosts.tab`;
1.21 albertel 825: open(OUT,'>>../new_'.$lonCluster.'_hosts.tab') or
826: die("cannot open loncom/new_${lonCluster}_hosts.tab for output\n");
1.15 harris41 827: print(OUT $line2insert);
828: close(OUT);
829: `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;
830: # email appropriate message
831: `echo "INSERT:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "INSERT:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
1.27 albertel 832: }
833: }
834: $lineexistflag=0;
835: if ($flag==1) {
836: `rm -f ../domain.tab`;
837: open(IN,'<../'.$lonCluster.'_domain.tab');
838: while(<IN>) {
839: if (/^$domaininsert$/) {
840: $lineexistflag=1;
841: }
842: if (/^$perlvar{'lonDefDomain'}\:/) {
843: $domainexistflag=1;
844: }
845: }
846: close(IN);
847: if ($domainexistflag and !$lineexistflag) {
848: print <<END;
849: WARNING: $perlvar{'lonDefDomain'} already exists inside
850: loncapa/loncom/${lonCluster}_domain.tab. The entry inside
851: ${lonCluster}_domain.tab does not match your settings.
852: The entry inside ${lonCluster}_domain.tab is being replaced
853: with your new values.
854: END
855: `grep -v "$perlvar{'lonDefDomain'}:" ../${lonCluster}_domain.tab > ../new_${lonCluster}_domain.tab`;
856: open(OUT,'>>../new_'.$lonCluster.'_domain.tab') or
857: die("cannot open loncom/${lonCluster}_domain.tab for output\n");
858: print(OUT $domaininsert);
859: close(OUT);
860: `ln -s new_${lonCluster}_domain.tab ../domain.tab`;
861: # email appropriate message
1.34 albertel 862: `echo "REPLACEdom:$lonCluster:$lonHostID:$date:$domaninsert" | mail -s "REPLACEdom:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
1.27 albertel 863: }
864: elsif ($domainexistflag and $lineexistflag) {
865: print <<END;
866: Entry exists in ${lonCluster}_domain.tab.
867: END
868: `ln -s ${lonCluster}_domain.tab ../domain.tab`;
869: # email appropriate message
870: `echo "STABLEUPDATEdom:$lonCluster:$lonHostID:$date:$domaininsert" | mail -s "STABLEUPDATEdom:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
871: }
872: elsif (!$domainexistflag and !$lineexistflag) {
873: print <<END;
874: New entry for $lonCluster.
875: END
876: `cat ../${lonCluster}_domain.tab > ../new_${lonCluster}_domain.tab`;
877: open(OUT,'>>../new_'.$lonCluster.'_domain.tab') or
878: die("cannot open loncom/new_${lonCluster}_domain.tab for output\n");
879: print(OUT $domaininsert);
880: close(OUT);
881: `ln -s new_${lonCluster}_domain.tab ../domain.tab`;
882: # email appropriate message
883: `echo "INSERTdom:$lonCluster:$lonHostID:$date:$domaininsert" | mail -s "INSERTdom:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
1.6 harris41 884: }
885: }
1.1 harris41 886: }
887: </perlscript>
888: </file>
889: </files>
890: </piml>
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/back.gif){kind=icon}
Return to updatequery.piml CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [LON-CAPA] / doc / loncapafiles