Annotation of doc/loncapafiles/updatequery.piml, revision 1.52
1.2 harris41 1: <!-- updatequery.piml -->
1.1 harris41 2:
1.52 ! albertel 3: <!-- $Id: updatequery.piml,v 1.51 2006/12/10 23:38:35 albertel Exp $ -->
1.1 harris41 4:
5: <!--
6:
7: This file is part of the LearningOnline Network with CAPA (LON-CAPA).
8:
9: LON-CAPA is free software; you can redistribute it and/or modify
10: it under the terms of the GNU General Public License as published by
11: the Free Software Foundation; either version 2 of the License, or
12: (at your option) any later version.
13:
14: LON-CAPA is distributed in the hope that it will be useful,
15: but WITHOUT ANY WARRANTY; without even the implied warranty of
16: MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17: GNU General Public License for more details.
18:
19: You should have received a copy of the GNU General Public License
20: along with LON-CAPA; if not, write to the Free Software
21: Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22:
23: /home/httpd/html/adm/gpl.txt
24:
25: http://www.lon-capa.org/
26:
27: -->
28:
29: <piml>
30: <targetroot>/</targetroot>
31: <files>
32: <file>
1.4 harris41 33: <target dist='default'>/</target>
1.1 harris41 34: <perlscript mode='fg'>
1.4 harris41 35: $|=1;
1.1 harris41 36: print(<<END);
37:
38:
39: *********************************************
40: *********************************************
41: **** ****
42: **** LON-CAPA SYSTEM INFORMATION REQUEST ****
43: **** ****
44: **** Please respond to the choices below ****
45: **** ****
46: *********************************************
47: *********************************************
48:
49: END
1.4 harris41 50: sleep(3);
1.1 harris41 51: </perlscript>
52: </file>
53: <file>
1.22 albertel 54: <target dist='default'>loncom/hosts.tab</target>
55: <perlscript mode='fg'>
56: unless (-l "<TARGET />") {
57: print(<<END);
58:
59: ===============================================================================
1.30 www 60: Which cluster option would you like to have installed?
61: IMPORTANT: to take advantage of the cluster options 1) and 3),
62: you must contact lon-capa\@lon-capa.org.
63:
64: 1) PRODUCTION - you want to eventually connect this machine to the
65: LON-CAPA content sharing network. This setting is for
66: schools, colleges, and universities, that currently
67: are running - or in the future will run - courses
1.22 albertel 68: 2) STAND-ALONE - you want this machine to run in 'stand-alone' mode and
69: not be connected to other LON-CAPA machines for now
1.30 www 70: 3) DEVELOPMENT - you want to do software (not content!) development with
71: this workstation and eventually link it with the
72: workstations of other LON-CAPA software developers.
1.40 albertel 73: 4) RUNNING YOUR OWN CLUSTER - this machine is not in the standard LON-CAPA
74: clusters and won't be in the future and you want the existing
75: hosts.tab and domain.tab files to be left alone.
76: (This choice is unlikely what you want to select.)
1.22 albertel 77: END
78: # Option number 26 will install rawhide_hosts.tab, but
79: # the typical user does not want to be part of an intensive
80: # machine test cluster.
81:
82: # get input
83: # if valid then process, otherwise loop
84: $flag=0;
85: while (!$flag) {
86: print "ENTER 1, 2, 3, or 4:\n";
87: my $choice=<>;
88: chomp($choice);
89: if ($choice==1) {
90: $lonCluster='production'; $flag=1;
91: }
92: elsif ($choice==2) {
93: $lonCluster='standalone'; $flag=1;
94: }
95: elsif ($choice==3) {
96: $lonCluster='development'; $flag=1;
97: }
98: elsif ($choice==4) {
99: $lonCluster='existing'; $flag=1;
1.52 ! albertel 100: foreach my $file ('hosts.tab','dns_hosts.tab',
! 101: 'domain.tab','dns_domain.tab') {
! 102: if (-e '/home/httpd/lonTabs/'.$file) {
! 103: `cp /home/httpd/lonTabs/$file ../existing_$file`;
! 104: }
! 105: else {
! 106: print <<END;
! 107: There is no existing /home/httpd/lonTabs/$file
1.22 albertel 108: END
1.52 ! albertel 109: die('');
! 110: }
1.27 albertel 111: }
1.22 albertel 112: }
113: elsif ($choice==26) {
114: $lonCluster='rawhide'; $flag=1;
115: }
116: }
117: }
118: </perlscript>
119: </file>
120: <file>
1.10 harris41 121: <target dist='default'>/home/httpd/lonTabs/hosts.tab</target>
1.1 harris41 122: <perlscript mode='fg'>
1.4 harris41 123: $|=1;
1.20 albertel 124: my $domainDescription;
1.29 albertel 125: my $domainTabExtras;
1.43 raeburn 126: my $primaryLibServer;
127: my @libservers = ();
1.1 harris41 128: unless (-e "<TARGET />") {
129: print(<<END);
130: WELCOME TO LON-CAPA!
131:
132: If you have questions, please visit http://install.lon-capa.org
1.32 raeburn 133: or contact helpdesk\@lon-capa.org.
1.1 harris41 134:
135: ===============================================================================
1.4 harris41 136: The following 4 values are needed to configure LON-CAPA:
137: * Machine Role
1.8 harris41 138: * LON-CAPA Domain Name
139: * LON-CAPA Machine ID Name, and
1.47 albertel 140: * Server Administration E-mail Address.
1.32 raeburn 141: ===============================================================================
142:
143: In addition, a Support E-mail Address can also be included. If
144: an address is included then one of the options in the LON-CAPA
145: help menu will be a link to a form that a user will complete to
146: request LON-CAPA help.
147:
1.1 harris41 148: END
1.3 harris41 149:
1.4 harris41 150: open(OUT,'>/tmp/loncapa_updatequery.out');
151: close(OUT);
152:
1.3 harris41 153: # query for Machine Role
154: print(<<END);
155: **** Machine Role ****
156: Library server (recommended if first-time installation of LON-CAPA):
157: Servers that are repositories of authoritative educational resources.
158: These servers also provide the construction space by which instructors
159: assemble their classroom online material.
160: Access server:
161: Servers that load-balance high-traffic delivery of educational resources
162: over the world-wide web.
1.4 harris41 163: 1) Will this be a library server? (recommended if this is your first install)
1.3 harris41 164: 2) Or, will this be an access server?
165: END
1.4 harris41 166: my $flag=0;
167: my $r='';
168: my $lonRole;
169: while (!$flag) {
170: print "ENTER A CHOICE OF 1 or 2:\n";
171: my $choice=<>;
172: chomp($choice);
173: if ($choice==1) {
174: open(OUT,'>>/tmp/loncapa_updatequery.out');
175: print(OUT 'lonRole'."\t".'library'."\n");
176: close(OUT);
177: $lonRole='library';
178: $r='l';
179: $flag=1;
180: }
181: elsif ($choice==2) {
182: open(OUT,'>>/tmp/loncapa_updatequery.out');
183: print(OUT 'lonRole'."\t".'access'."\n");
184: close(OUT);
185: $lonRole='access';
186: $r='a';
187: $flag=2;
188: }
189: else {
190:
191: }
192: }
1.3 harris41 193:
194: # need to recommend a machine ID name (ipdomain.l.somenumber)
1.36 albertel 195: my $hostname=`hostname -f`; chomp($hostname);
1.4 harris41 196: my $ipdomain='';
197: if ($hostname=~/([^\.]*)\.([^\.]*)$/) {
198: $ipdomain=$1;
199: }
1.1 harris41 200:
201: print(<<END);
202:
1.8 harris41 203: **** Domain ****
1.45 www 204: [This does NOT need to correspond to internet address domains.
205: Please make this name short AND descriptive of your organization.
206: Domain names are close to impossible to change later!!!
207: Good examples might be "msu" or "bionet" or "vermontcc".
208: Bad examples are "physics" (too general)
1.37 www 209: or "michiganstateuniversity" (too long)
210: or "msuedu" (internet domain, just make it "msu")
1.45 www 211: or "msuphysics" (only if there is a good reason to limit to department
212: - we don't know of one)
1.37 www 213: or "mydomain" (what is that?)
1.45 www 214: Avoid multiple domains at the same institution, even if it means that you
215: have to actually work together with your colleagues. You can still run
216: multiple library servers within the same domain.
217: If this domain is eventually going to be part of the main production
218: cluster, you MUST contact the LON-CAPA group at MSU (loncapa@loncapa.org)
219: to have a domain name assigned, and then use it exactly as given. This is
220: also true for test installs that might eventually turn into production setups.
221: Stop now if you didn't do so.]
1.1 harris41 222: END
1.8 harris41 223:
224: # get domain name
1.1 harris41 225: # accept if valid, if not valid, tell user and repeat
1.4 harris41 226: $flag=0;
1.8 harris41 227: my $lonDefDomain;
1.4 harris41 228: while (!$flag) {
229: if ($ipdomain) {
230: print(<<END);
1.8 harris41 231: ENTER LONCAPA DOMAIN [$ipdomain]:
1.4 harris41 232: END
233: }
234: else {
235: print(<<END);
1.8 harris41 236: ENTER LONCAPA DOMAIN:
1.4 harris41 237: END
238: }
239: my $choice=<>;
240: chomp($choice);
1.18 harris41 241: my $bad_domain_flag=0;
1.41 albertel 242: my @bad_domain_names=('res','raw','userfiles','priv','adm','uploaded',
243: 'editupload');
1.18 harris41 244: foreach my $bad (@bad_domain_names) {
245: $bad_domain_flag=1 if $choice eq $bad;
246: }
1.37 www 247: if ($choice=~/capa/i) {
248: $bad_domain_flag=1;
249: }
1.8 harris41 250: if ($ipdomain and $choice=~/^\s*$/) {
251: $choice=$ipdomain;
1.4 harris41 252: open(OUT,'>>/tmp/loncapa_updatequery.out');
1.8 harris41 253: print(OUT 'lonDefDomain'."\t".$choice."\n");
1.4 harris41 254: close(OUT);
1.8 harris41 255: $lonDefDomain=$choice;
1.4 harris41 256: $flag=1;
1.51 albertel 257: } elsif (length($choice)>35) {
1.37 www 258: print "Name too long\n";
259: } elsif (length($choice)<2) {
260: print "Name too short\n";
1.38 www 261: } elsif ($bad_domain_flag) {
262: print "Invalid input ('$choice' conflicts with LON-CAPA namespace).\n";
263: print "Please try something different than '$choice'\n";
1.51 albertel 264: } elsif ($choice!~/\_/ and $choice=~/^[\w\-.]+$/) {
1.4 harris41 265: open(OUT,'>>/tmp/loncapa_updatequery.out');
1.8 harris41 266: print(OUT 'lonDefDomain'."\t".$choice."\n");
1.4 harris41 267: close(OUT);
1.8 harris41 268: $lonDefDomain=$choice;
269: $r='l';
1.4 harris41 270: $flag=1;
1.37 www 271: } else {
1.51 albertel 272: print "Invalid input (only alphanumeric characters, '-', and '.' supported).\n";
1.4 harris41 273: }
274: }
1.1 harris41 275:
1.20 albertel 276:
277: # get domain description
278: # accept if valid, if not valid, tell user and repeat
279: $flag=0;
280:
281: while (!$flag) {
282: print(<<END);
283:
284: **** Domain Description ****
285: String describing the domain, to be shown to users.
286: [Example, msu is Michigan State University]
287: ENTER DOMAIN DESCRIPTION:
288: END
289:
290: my $choice=<>;
291: chomp($choice);
292: if ($choice!~/:/) {
293: open(OUT,'>>/tmp/loncapa_updatequery.out');
294: print(OUT 'domainDescription'."\t".$choice."\n");
295: close(OUT);
296: $domainDescription=$choice;
297: $flag=1;
298: }
299: else {
300: print "Invalid input (no ':' allowed).\n";
301: }
302: }
303:
1.8 harris41 304: my $lonHostID;
305: if ($lonDefDomain) {
306: $lonHostID=$lonDefDomain.$r.int(1+rand(9)); # should be probably also detect
307: # against the hosts.tab
308: }
309:
1.1 harris41 310: print(<<END);
311:
1.8 harris41 312: **** Machine ID Name ****
1.45 www 313: [This does NOT need to correspond to internet address names;
1.8 harris41 314: this name MUST be unique to the whole LON-CAPA network;
1.45 www 315: we recommend that you use a name based off of your institution.
316: Good examples: "msul1" or "bioneta2".
317: Bad examples: "loncapabox" or "studentsinside".
1.37 www 318: Note that machine names are very hard to change later.]
1.1 harris41 319: END
1.8 harris41 320: # get machine name
1.1 harris41 321: # accept if valid, if not valid, tell user and repeat
1.4 harris41 322: $flag=0;
323: while (!$flag) {
324: if ($ipdomain) {
325: print(<<END);
1.8 harris41 326: ENTER LONCAPA MACHINE ID [$lonHostID]:
1.4 harris41 327: END
328: }
329: else {
330: print(<<END);
1.8 harris41 331: ENTER LONCAPA MACHINE ID:
1.4 harris41 332: END
333: }
334: my $choice=<>;
335: chomp($choice);
1.37 www 336: if ($choice=~/capa/i) {
337: print "Invalid input (names containing 'capa' are reserved).\n";
338: } elsif ($lonHostID and $choice=~/^\s*$/) {
1.8 harris41 339: $choice=$lonHostID;
1.4 harris41 340: open(OUT,'>>/tmp/loncapa_updatequery.out');
1.8 harris41 341: print(OUT 'lonHostID'."\t".$choice."\n");
1.4 harris41 342: close(OUT);
1.8 harris41 343: $lonHostID=$choice;
1.4 harris41 344: $flag=1;
1.51 albertel 345: } elsif (length($choice)>45) {
1.37 www 346: print "Name too long\n";
347: } elsif (length($choice)<4) {
348: print "Name too short\n";
1.51 albertel 349: } elsif ($choice!~/\_/ and $choice=~/^[\w\-.]+$/) {
1.4 harris41 350: open(OUT,'>>/tmp/loncapa_updatequery.out');
1.8 harris41 351: print(OUT 'lonHostID'."\t".$choice."\n");
1.4 harris41 352: close(OUT);
1.8 harris41 353: $lonHostID=$choice;
1.4 harris41 354: $flag=1;
1.37 www 355: } else {
1.51 albertel 356: print "Invalid input (only alphanumeric characters, '-', and '.' supported).\n";
1.4 harris41 357: }
358: }
1.1 harris41 359:
1.43 raeburn 360: # get primary library server in domain
361: if ($lonRole eq 'library') {
362: if (!grep/^\Q$lonHostID\E$/,@libservers) {
363: push(@libservers,$lonHostID);
364: }
365: if (@libservers == 1) {
366: $primaryLibServer = $libservers[0];
367: }
368: }
369: while (!$flag) {
370: print(<<END);
371: **** Domain's Primary Library Server ID ****
372: This should be the LON-CAPA machine ID of a library server in your
373: domain. If you only have a single library server in your domain, then
374: the Primary Library server ID will be the machine ID of that server.
375: This server will be where domain data which are not associated with any
376: specific home library server will be stored (e.g., e-mail broadcast by
377: administrators to users in the domain).
378: END
379: if (defined($primaryLibServer)) {
380: print(<<END);
381: ENTER DOMAIN'S PRIMARY LIBRARY SERVER ID [$primaryLibServer]:
382: END
383: } elsif (@libservers > 0) {
384: print(<<END);
385: ENTER DOMAIN'S PRIMARY LIBRARY SERVER ID [$libservers[0]]
386: END
387: } else {
388: print (<<END);
389: No library servers could be identified for this domain. If you have already installed LON-CAPA on a different server (designated as a library server) in this domain, please enter the LONCAPA MACHINE ID of that server. If not, you will need to install a LON-CAPA library server. Enter the MACHINE ID of the server you plan to designate as a library server.
390: END
391: }
392:
393: my $choice=<>;
394: chomp($choice);
395: if ($primaryLibServer and $choice=~/^\s*$/) {
396: $choice=$primaryLibServer;
397: open(OUT,'>>/tmp/loncapa_updatequery.out');
398: print(OUT 'primaryLibServer'."\t".$choice."\n");
399: close(OUT);
400: $flag=1;
1.51 albertel 401: } elsif (length($choice)>35) {
1.43 raeburn 402: print "Name too long\n";
403: } elsif (length($choice)<4) {
404: print "Name too short\n";
1.51 albertel 405: } elsif ($choice!~/\_/ and $choice=~/^[\w\-.]+$/) {
1.43 raeburn 406: open(OUT,'>>/tmp/loncapa_updatequery.out');
407: print(OUT 'primaryLibServer'."\t".$choice."\n");
408: close(OUT);
409: $primaryLibServer=$choice;
410: $flag=1;
411: } else {
1.51 albertel 412: print "Invalid input (only alphanumeric characters, '-', and '.' supported).\n";
1.43 raeburn 413: }
414: }
415:
416:
1.32 raeburn 417: # get admin e-mail address
1.4 harris41 418: # accept if valid, if not valid, tell user and repeat
419: $flag=0;
1.9 harris41 420: my $lonAdmEMail;
1.4 harris41 421: while (!$flag) {
1.1 harris41 422: print(<<END);
423:
1.47 albertel 424: **** Server Administrator's E-mail ****
1.1 harris41 425: E-mail address of the person who will manage this machine
1.4 harris41 426: [should be in the form somebody\@somewhere]
1.32 raeburn 427: ENTER ADMIN E-MAIL ADDRESS:
1.1 harris41 428: END
429:
1.4 harris41 430: my $choice=<>;
431: chomp($choice);
432: if ($choice=~/\@/) {
433: open(OUT,'>>/tmp/loncapa_updatequery.out');
1.9 harris41 434: print(OUT 'lonAdmEMail'."\t".$choice."\n");
1.4 harris41 435: close(OUT);
1.9 harris41 436: $lonAdmEMail=$choice;
1.4 harris41 437: $flag=1;
438: }
439: else {
440: print "Invalid input (this needs to look like an e-mail address!).\n";
441: }
442: }
443:
1.32 raeburn 444:
445: # get support e-mail address
446: # accept if valid, if not valid, tell user and repeat
447: $flag=0;
448: my $lonSupportEMail;
449: while (!$flag) {
450: print(<<END);
451:
452: **** Support E-mail ****
453: E-mail address of the person who will receive
454: help requests from LON-CAPA users who access
455: the system via this server. If the address is left blank,
456: then a help support form will not be displayed
457: as part of the help menu.
458: [should be in the form somebody\@somewhere]
459: ENTER SUPPORT E-MAIL ADDRESS:
460: END
461:
462: my $choice=<>;
463: chomp($choice);
464: $choice =~ s/\s//g;
1.33 albertel 465: if ( ($choice=~/\@/) || $choice eq '') {
1.32 raeburn 466: open(OUT,'>>/tmp/loncapa_updatequery.out');
467: print(OUT 'lonSupportEMail'."\t".$choice."\n");
468: close(OUT);
469: $lonSupportEMail=$choice;
470: $flag=1;
471: }
472: else {
473: print "Invalid input (this either needs to be blank, or look like an e-mail address!).\n";
474: }
475: }
476:
477:
1.1 harris41 478: # update loncapa.conf
1.49 raeburn 479: my $confdir = '/etc/httpd/conf/';
1.50 raeburn 480: if ('<DIST />' eq 'sles10' || '<DIST />' eq 'suse10.1') {
1.49 raeburn 481: $confdir = '/etc/apache2/';
482: }
1.5 harris41 483: my $filename='loncapa.conf';
484: my %perlvar;
485: if (-e "$confdir$filename") {
486: open(CONFIG,'<'.$confdir.$filename) or die("Can't read $confdir$filename");
487: while (my $configline=<CONFIG>) {
488: if ($configline =~ /^[^\#]*PerlSetVar/) {
489: my ($unused,$varname,$varvalue)=split(/\s+/,$configline);
490: chomp($varvalue);
1.12 harris41 491: $perlvar{$varname}=$varvalue if $varvalue!~/^\{\[\[\[\[/;
1.5 harris41 492: }
493: }
494: close(CONFIG);
495: }
496: $perlvar{'lonHostID'}=$lonHostID;
497: $perlvar{'lonDefDomain'}=$lonDefDomain;
1.9 harris41 498: $perlvar{'lonAdmEMail'}=$lonAdmEMail;
1.32 raeburn 499: $perlvar{'lonSupportEMail'}=$lonSupportEMail;
1.5 harris41 500: $perlvar{'lonRole'}=$lonRole;
1.16 harris41 501: unless ($perlvar{'lonLoadLim'} and $perlvar{'lonLoadLim'}!~/\{\[\[\[\[/) {
1.5 harris41 502: $perlvar{'lonLoadLim'}='2.00';
503: }
1.25 albertel 504: unless ($perlvar{'lonUserLoadLim'} and $perlvar{'lonUserLoadLim'}!~/\{\[\[\[\[/) {
505: $perlvar{'lonUserLoadLim'}='0';
506: }
1.16 harris41 507: unless ($perlvar{'lonExpire'} and $perlvar{'lonExpire'}!~/\{\[\[\[\[/) {
1.5 harris41 508: $perlvar{'lonExpire'}='86400';
509: }
1.16 harris41 510: unless ($perlvar{'lonReceipt'} and $perlvar{'lonReceipt'}!~/\{\[\[\[\[/) {
1.5 harris41 511: my $lonReceipt='';
1.11 harris41 512: srand(time ^ $$ ^ unpack "%L*", `ps axww | gzip`);
1.5 harris41 513: my @alnum=(0..9,a..z);
514: foreach my $i (1..20) {
515: $lonReceipt.=$alnum[int(rand(36))];
516: }
517: $perlvar{'lonReceipt'}=$lonReceipt;
518: }
519: open(OUT,">$confdir$filename") or
520: die("Cannot output to $confdir$filename\n");
521: foreach my $key (keys %perlvar) {
522: my $value=$perlvar{$key};
1.49 raeburn 523: my $line = "PerlSetVar $key $value";
524: if ($value eq '') {
525: $line = '#'.$line;
526: }
1.5 harris41 527: print(OUT <<END);
1.49 raeburn 528: $line
1.5 harris41 529: END
530: }
531: close(OUT);
1.1 harris41 532: }
533: </perlscript>
534: </file>
535: <file>
1.49 raeburn 536: <target dist='default'>/etc/httpd/conf/</target>
1.50 raeburn 537: <target dist='sles10 suse10.1'>/etc/apache2/</target>
1.1 harris41 538: <perlscript mode='fg'>
1.31 albertel 539: sub securesetting {
540: my (%perlvar)=@_;
541: my $securestatus='unknown';
542: my $securenum='';
543: if ( $perlvar{'loncAllowInsecure'}&& $perlvar{'londAllowInsecure'}) {
544: $securestatus='no'; $securenum='4';
545: } elsif ( $perlvar{'loncAllowInsecure'}&& !$perlvar{'londAllowInsecure'}) {
546: $securestatus='lond'; $securenum='3';
547: } elsif (!$perlvar{'loncAllowInsecure'}&& $perlvar{'londAllowInsecure'}) {
548: $securestatus='lonc'; $securenum='2';
549: } elsif (!$perlvar{'loncAllowInsecure'}&& !$perlvar{'londAllowInsecure'}) {
550: $securestatus='yes (lond and lonc)'; $securenum='1';
551: }
552: return ($securestatus,$securenum);
553: }
1.1 harris41 554: # read values from loncapa.conf
1.49 raeburn 555: my $confdir = "<TARGET />";
1.5 harris41 556: my $filename='loncapa.conf';
557: my %perlvar;
1.31 albertel 558: my ($securestatus,$securenum);
1.5 harris41 559: if (-e "$confdir$filename") {
560: open(CONFIG,'<'.$confdir.$filename) or
561: die("Can't read $confdir$filename");
562: while (my $configline=<CONFIG>) {
563: if ($configline =~ /^[^\#]*PerlSetVar/) {
564: my ($unused,$varname,$varvalue)=split(/\s+/,$configline);
565: chomp($varvalue);
566: $perlvar{$varname}=$varvalue;
567: }
568: }
569: close(CONFIG);
570: }
1.16 harris41 571: unless ($perlvar{'lonLoadLim'} and $perlvar{'lonLoadLim'}!~/\{\[\[\[\[/) {
572: $perlvar{'lonLoadLim'}='2.00';
573: }
1.25 albertel 574: unless ($perlvar{'lonUserLoadLim'} and $perlvar{'lonUserLoadLim'}!~/\{\[\[\[\[/) {
575: $perlvar{'lonUserLoadLim'}='0';
576: }
1.16 harris41 577: unless ($perlvar{'lonExpire'} and $perlvar{'lonExpire'}!~/\{\[\[\[\[/) {
578: $perlvar{'lonExpire'}='86400';
579: }
1.31 albertel 580: unless ($perlvar{'londAllowInsecure'} and $perlvar{'londAllowInsecure'}!~/\{\[\[\[\[/) {
581: $perlvar{'londAllowInsecure'}='1';
582: }
583: unless ($perlvar{'loncAllowInsecure'} and $perlvar{'loncAllowInsecure'}!~/\{\[\[\[\[/) {
584: $perlvar{'loncAllowInsecure'}='1';
585: }
586: ($securestatus,$securenum)=&securesetting(%perlvar);
1.16 harris41 587: unless ($perlvar{'lonReceipt'} and $perlvar{'lonReceipt'}!~/\{\[\[\[\[/) {
588: my $lonReceipt='';
589: srand(time ^ $$ ^ unpack "%L*", `ps axww | gzip`);
590: my @alnum=(0..9,a..z);
591: foreach my $i (1..20) {
592: $lonReceipt.=$alnum[int(rand(36))];
593: }
594: $perlvar{'lonReceipt'}=$lonReceipt;
595: }
1.7 harris41 596: my %perlvarstatic;
597: if (-e "${confdir}loncapa_apache.conf") {
598: open(CONFIG,'<'.$confdir.'loncapa_apache.conf') or
599: die("Can't read ${confdir}loncapa_apache.conf");
600: while (my $configline=<CONFIG>) {
601: if ($configline =~ /^[^\#]*PerlSetVar/) {
602: my ($unused,$varname,$varvalue)=split(/\s+/,$configline);
603: chomp($varvalue);
604: $perlvarstatic{$varname}=$varvalue;
605: }
606: }
607: close(CONFIG);
608: }
1.23 albertel 609: if (!$domainDescription && $lonCluster ne 'existing') {
1.27 albertel 610: open(IN,'<../'.$lonCluster.'_domain.tab');
1.22 albertel 611: while(<IN>) {
1.27 albertel 612: if (/^$perlvar{'lonDefDomain'}\:/) {
1.29 albertel 613: (undef,$domainDescription,$domainTabExtras)=split(/:/,$_,3);
1.22 albertel 614: chomp($domainDescription);
1.29 albertel 615: chomp($domainTabExtras);
1.46 albertel 616: # the remianing field (primary lib server) is handled later
617: $domainTabExtras = join(':',(split(/:/,$domainTabExtras))[0..5]);
1.22 albertel 618: last;
619: }
620: }
1.23 albertel 621: close(IN);
1.22 albertel 622: }
1.23 albertel 623: if (!$domainDescription) {
1.27 albertel 624: open(IN,'</home/httpd/lonTabs/domain.tab');
1.23 albertel 625: while(<IN>) {
1.27 albertel 626: if (/^$perlvar{'lonDefDomain'}\:/) {
1.29 albertel 627: (undef,$domainDescription,$domainTabExtras)=split(/:/,$_,3);
1.23 albertel 628: chomp($domainDescription);
1.29 albertel 629: chomp($domainTabExtras);
1.46 albertel 630: # the remianing field (primary lib server) is handled later
1.48 raeburn 631: $domainTabExtras = join(':',(split(/:/,$domainTabExtras))[0..5]);
1.23 albertel 632: last;
633: }
634: }
635: close(IN);
636: }
1.43 raeburn 637: if (!$primaryLibServer and $lonCluster ne 'existing') {
638: open(IN,'<../'.$lonCluster.'_domain.tab');
639: while(<IN>) {
640: if (/^$perlvar{'lonDefDomain'}\:/) {
641: (undef,undef,undef,undef,undef,undef,undef,undef,
642: $primaryLibServer)=split(/:/,$_);
643: chomp($primaryLibServer);
644: }
645: }
646: close(IN);
647: if (!$primaryLibServer) {
648: open(IN,'<../'.$lonCluster.'_hosts.tab');
649: while(<IN>) {
650: if (/^([^\:]+)\:\Q$perlvar{'lonDefDomain'}\E\:library\:/) {
651: push(@libservers,$1);
652: }
653: }
654: close(IN);
655: if (@libservers == 1) {
656: $primaryLibServer = $libservers[0];
657: }
658: }
659: }
660: if (!$primaryLibServer) {
661: open(IN,'</home/httpd/lonTabs/domain.tab');
662: while(<IN>) {
663: if (/^$perlvar{'lonDefDomain'}\:/) {
664: (undef,undef,undef,undef,undef,undef,undef,undef,
665: $primaryLibServer)=split(/:/,$_);
666: chomp($primaryLibServer);
667: }
668: close(IN);
669: }
670: if (!$primaryLibServer) {
671: open(IN,'</home/httpd/lonTabs/hosts.tab');
672: while(<IN>) {
673: if (/^([^\:]+)\:\Q$perlvar{'lonDefDomain'}\E\:library\:/) {
674: push(@libservers,$1);
675: }
676: }
677: close(IN);
678: if (@libservers == 1) {
679: $primaryLibServer = $libservers[0];
680: }
681: }
682: }
1.23 albertel 683:
1.6 harris41 684: # implement editing logic below, interactively
1.46 albertel 685: # update loncapa.conf until 12 is entered
1.6 harris41 686:
687: $flag=0;
1.17 harris41 688:
1.6 harris41 689: while (!$flag) {
1.1 harris41 690: print(<<END);
691:
692: ===============================================================================
693: This is now the current configuration of your machine.
1.31 albertel 694: 1) Domain Name: $perlvar{'lonDefDomain'}
695: 2) Domain Description: $domainDescription
696: 3) Machine Name: $perlvar{'lonHostID'}
1.43 raeburn 697: 4) ID of primary library server for domain: $primaryLibServer
1.47 albertel 698: 5) Server Administrator's E-mail Address: $perlvar{'lonAdmEMail'}
1.43 raeburn 699: 6) Support E-mail Address: $perlvar{'lonSupportEMail'}
700: 7) Role: $perlvar{'lonRole'}
701: 8) Cache Expiration Time: $perlvar{'lonExpire'}
702: 9) Server Load: $perlvar{'lonLoadLim'}
703: 10) User Load: $perlvar{'lonUserLoadLim'}
704: 11) Allow only secure connections: $securestatus
705: 12) Everything is correct up above
1.6 harris41 706: END
1.38 www 707:
708: my $error='';
709: foreach my $v ($perlvar{'lonDefDomain'},$perlvar{'lonHostID'}) {
1.51 albertel 710: if (length($v)>35) { $error.="\nName $v too long"; }
1.38 www 711: if (length($v)<2) { $error.="\nName $v too short"; }
1.39 albertel 712: if ($v=~/capa/i) {
713: if ($v!~/^oucapa\d+$/ &&
714: ($v!~/^capa\d+$/ && $perlvar{'lonDefDomain'} eq 'uwsp')) {
715: $error.="\nName $v contains 'capa'";
716: }
717: }
1.41 albertel 718: foreach my $bad ('res','raw','userfiles','priv','adm','uploaded',
719: 'editupload') {
1.38 www 720: $error.="\nName $v reserved." if $v eq $bad;
721: }
1.51 albertel 722: if ($v=~/[^\w\-.]/) { $error.="\nName $v contains special characters"; }
1.38 www 723: }
1.42 albertel 724: if ($domainDescription!~/^[\(\)\-\w\s,]+$/) {
1.38 www 725: $error.="\nDomain Description contains special characters";
726: }
727: foreach my $v ($perlvar{'lonExpire'},$perlvar{'lonLoadLim'}) {
728: unless ($v=~/^[\d+\.]+$/) { $error.="\nNumber expected instead of $v"; }
729: }
730: unless (($perlvar{'lonRole'} eq 'library') || ($perlvar{'lonRole'} eq 'access')) {
731: $error.="\nInvalid Role";
1.17 harris41 732: }
1.43 raeburn 733:
734: if (!defined($primaryLibServer)) {
735: if (@libservers > 0) {
736: $error .= "No primary library server ID designated. Choose from: ".join(',',sort(@libservers));
737: } else {
738: $error .= "No library servers in this domain (including current server)";
739: }
740: } else {
1.51 albertel 741: if (length($primaryLibServer)>35) { $error.="\nPrimary Library Server ID: $primaryLibServer too long"; }
1.43 raeburn 742: if (length($primaryLibServer)<2) { $error.="\nPrimary Library Server ID: $primaryLibServer too short"; }
743: if ($primaryLibServer =~/capa/i) {
744: if ($primaryLibServer!~/^oucapa\d+$/ &&
745: ($primaryLibServer!~/^capa\d+$/ && $perlvar{'lonDefDomain'} eq 'uwsp')) {
746: $error.="\nPrimary library server ID $primaryLibServer contains 'capa'";
747: }
748: }
749: foreach my $bad ('res','raw','userfiles','priv','adm','uploaded',
750: 'editupload') {
751: $error.="\nPrimary library server ID $primaryLibServer reserved." if $primaryLibServer eq $bad;
752: }
1.51 albertel 753: if ($primaryLibServer=~/[^\w\-.]/) { $error.="\nPrimary library server ID $primaryLibServer contains special characters"; }
1.43 raeburn 754: }
755:
756:
1.38 www 757: if ($error) { print "\n*** ERRORS: $error\n"; }
1.6 harris41 758: print(<<END);
1.43 raeburn 759: ENTER A CHOICE OF 1-11 TO CHANGE, otherwise ENTER 12:
1.1 harris41 760: END
1.5 harris41 761: my $choice=<>;
762: chomp($choice);
1.6 harris41 763: if ($choice==1) {
764: print(<<END);
1.16 harris41 765: 1) Domain Name: $perlvar{'lonDefDomain'}
1.20 albertel 766: ENTER NEW VALUE (this is an internal value used to identify a group of
767: LON-CAPA machines, it must be alphanumerical, we suggest
768: using a part of your actual DNS domain. For example, for
769: the machine loncapa.msu.edu, we set the Domain to msu):
1.6 harris41 770: END
771: my $choice2=<>;
772: chomp($choice2);
1.8 harris41 773: $perlvar{'lonDefDomain'}=$choice2;
1.6 harris41 774: }
775: elsif ($choice==2) {
776: print(<<END);
1.20 albertel 777: 2) Domain Description: $domainDescription
778: ENTER NEW VALUE (this should be a string that describes your domain, spaces
779: and punctuation are fine except for ':'):
780: END
781: my $choice2=<>;
782: chomp($choice2);
783: $domainDescription=$choice2;
784: }
785: elsif ($choice==3) {
786: print(<<END);
787: 3) Machine Name: $perlvar{'lonHostID'}
788: ENTER NEW VALUE (this will be the name of the machine in the LON-CAPA network
789: it cannot contain any of '_' '-' '.' or ':'. We suggest that
790: if you are in the domain 'example' and are the first library
791: server you enter 'examplel1') :
1.6 harris41 792: END
793: my $choice2=<>;
794: chomp($choice2);
1.8 harris41 795: $perlvar{'lonHostID'}=$choice2;
1.6 harris41 796: }
1.20 albertel 797: elsif ($choice==4) {
1.6 harris41 798: print(<<END);
1.43 raeburn 799: 4) ID of primary library server for domain: $primaryLibServer
800: ENTER NEW VALUE (this will be the LON-CAPA Machine ID of a library server in
801: your domain; it cannot contain any of '_' '-' '.' or ':'.
802: This server will be where domain data which are not
803: associated with any specific home library server
804: will be stored (e.g., e-mail broadcast by Domain Coordinators
805: to users in the domain).
806: END
807: my $choice2=<>;
808: chomp($choice2);
809: $primaryLibServer=$choice2;
810: }
811: elsif ($choice==5) {
812: print(<<END);
1.47 albertel 813: 5) Server Administrator's E-mail Address: $perlvar{'lonAdmEMail'}
1.6 harris41 814: ENTER NEW VALUE:
815: END
816: my $choice2=<>;
817: chomp($choice2);
1.9 harris41 818: $perlvar{'lonAdmEMail'}=$choice2;
1.6 harris41 819: }
1.43 raeburn 820: elsif ($choice==6) {
1.6 harris41 821: print(<<END);
1.43 raeburn 822: 6) Support E-mail Address: $perlvar{'lonSupportEMail'}
1.32 raeburn 823: ENTER NEW VALUE:
824: END
825: my $choice2=<>;
826: chomp($choice2);
827: $perlvar{'lonSupportEMail'}=$choice2;
828: }
1.43 raeburn 829: elsif ($choice==7) {
1.32 raeburn 830: print(<<END);
1.43 raeburn 831: 7) Role: $perlvar{'lonRole'}
1.20 albertel 832: ENTER NEW VALUE (this should be either 'access' or 'library'
833: if in doubt select 'library'):
1.6 harris41 834: END
835: my $choice2=<>;
836: chomp($choice2);
837: $perlvar{'lonRole'}=$choice2;
838: }
1.43 raeburn 839: elsif ($choice==8) {
1.6 harris41 840: print(<<END);
1.43 raeburn 841: 8) Cache Expiration Time: $perlvar{'lonExpire'}
1.20 albertel 842: ENTER NEW VALUE (in seconds, 86400 is a reasonable value):
1.6 harris41 843: END
844: my $choice2=<>;
845: chomp($choice2);
846: $perlvar{'lonExpire'}=$choice2;
847: }
1.43 raeburn 848: elsif ($choice==9) {
1.6 harris41 849: print(<<END);
1.43 raeburn 850: 9) Server Load: $perlvar{'lonLoadLim'}
1.6 harris41 851: ENTER NEW VALUE:
852: END
853: my $choice2=<>;
854: chomp($choice2);
855: $perlvar{'lonLoadLim'}=$choice2;
856: }
1.43 raeburn 857: elsif ($choice==10) {
1.25 albertel 858: print(<<END);
1.43 raeburn 859: 10) User Load: $perlvar{'lonUserLoadLim'}
1.25 albertel 860: Numer of users that can login before machine is 'overloaded'
1.26 albertel 861: ENTER NEW VALUE (integer value, 0 means there is no limit):
1.25 albertel 862: END
863: my $choice2=<>;
864: chomp($choice2);
865: $perlvar{'lonUserLoadLim'}=$choice2;
866: }
1.43 raeburn 867: elsif ($choice==11) {
1.31 albertel 868: print(<<END);
1.43 raeburn 869: 11) Allow only secure connections: $securestatus
1.31 albertel 870: The Lon-CAPA communication daemons lonc and lond can be configured to
871: allow only secure connections by default.
872:
873: POSSIBLE CHOICES:
874: 1) allow only secure connections and don't connect to machines that
875: can not be connected to securely
876: 2) allow only secure connections but allow this machine to connect to
877: machines that don't support secure connections
878: 3) allow insecure connections to this machine but only allow connections
879: to machines that support secure connections
880: 4) allow insecure connections
881: ENTER NEW VALUE (currenly $securenum):
882: END
883: my $choice2=<>;
884: chomp($choice2);
885: if ($choice2 eq '1') {
886: $perlvar{'loncAllowInsecure'}=0;$perlvar{'londAllowInsecure'}=0;
887: } elsif ($choice2 eq '2') {
888: $perlvar{'loncAllowInsecure'}=0;$perlvar{'londAllowInsecure'}=1;
889: } elsif ($choice2 eq '3') {
890: $perlvar{'loncAllowInsecure'}=1;$perlvar{'londAllowInsecure'}=0;
891: } elsif ($choice2 eq '4') {
892: $perlvar{'loncAllowInsecure'}=1;$perlvar{'londAllowInsecure'}=1;
893: }
894: ($securestatus,$securenum)=&securesetting(%perlvar);
895: }
1.43 raeburn 896: elsif (($choice==12) && (!$error)) {
1.6 harris41 897: $flag=1;
898: }
899: else {
1.38 www 900: print "Invalid input.\n";
1.6 harris41 901: }
902: }
1.7 harris41 903: open(OUT,">$confdir$filename") or
904: die("Cannot output to $confdir$filename\n");
905: foreach my $key (keys %perlvar) {
906: my $value=$perlvar{$key};
1.49 raeburn 907: my $line = "PerlSetVar $key $value";
908: if ($value eq '') {
909: $line = '#'.$line;
910: }
1.8 harris41 911: print(OUT <<END) unless $perlvarstatic{$key};
1.49 raeburn 912: $line
1.7 harris41 913: END
914: }
915: close(OUT);
1.1 harris41 916: </perlscript>
917: </file>
918: <file>
919: <target dist='default'>loncom/hosts.tab</target>
920: <perlscript mode='fg'>
921: unless (-l "<TARGET />") {
1.36 albertel 922: my $hostname=`hostname -f`;chomp($hostname);
1.15 harris41 923: $date=`date -I`; chomp($date);
924: $lonHostID=$perlvar{'lonHostID'};
1.51 albertel 925: $lonHostID=~s/[^\w\-.]//g;
1.15 harris41 926: $lineexistflag=0;
927: $hostidexistflag=0;
1.22 albertel 928: $line2insert=<<END;
1.35 albertel 929: $perlvar{'lonHostID'}:$perlvar{'lonDefDomain'}:$perlvar{'lonRole'}:$hostname
1.15 harris41 930: END
1.43 raeburn 931: $domaininsert="$perlvar{'lonDefDomain'}:$domainDescription:$domainTabExtras:$primaryLibServer\n";
1.23 albertel 932: if ($lonCluster eq 'standalone') {
933: open(OUT,'>../'.$lonCluster.'_hosts.tab') or
934: die('file generation error');
935: print(OUT $line2insert);
1.52 ! albertel 936: print OUT ("^$hostname\n");
! 937: close(OUT);
! 938: open(OUT,'>../'.$lonCluster.'_dns_hosts.tab') or
! 939: die('file generation error');
! 940: print(OUT $line2insert);
1.23 albertel 941: close(OUT);
1.27 albertel 942: open(OUT,'>../'.$lonCluster.'_domain.tab') or
943: die('file generation error');
944: print(OUT $domaininsert);
945: close(OUT);
1.52 ! albertel 946: open(OUT,'>../'.$lonCluster.'_dns_domain.tab') or
! 947: die('file generation error');
! 948: print(OUT $domaininsert);
! 949: close(OUT);
1.23 albertel 950: }
1.15 harris41 951: if ($flag==1) {
1.6 harris41 952: `rm -f ../hosts.tab`;
1.52 ! albertel 953: `rm -f ../dns_hosts.tab`;
! 954: `ln -s ${lonCluster}_dns_hosts.tab ../dns_hosts.tab`;
! 955: open(IN,'<../'.$lonCluster.'_dns_hosts.tab');
! 956: while(my $line = <IN>) {
! 957: if ($line =~ /^\Q$line2insert\E$/) {
1.13 harris41 958: $lineexistflag=1;
959: }
1.52 ! albertel 960: if ($line =~ /^\Q$lonHostID\E\:/) {
1.13 harris41 961: $hostidexistflag=1;
962: }
963: }
964: close(IN);
965: if ($hostidexistflag and !$lineexistflag) {
966: print <<END;
967: WARNING: $lonHostID already exists inside
1.52 ! albertel 968: loncapa/loncom/${lonCluster}_dns_hosts.tab. The entry inside
! 969: ${lonCluster}_dns_hosts.tab does not match your settings.
! 970: An entry inside ${lonCluster}_hosts.tab will be made
1.13 harris41 971: with your new values.
972: END
1.15 harris41 973: `grep -v "$lonHostID:" ../${lonCluster}_hosts.tab > ../new_${lonCluster}_hosts.tab`;
974: open(OUT,'>>../new_'.$lonCluster.'_hosts.tab') or
975: die("cannot open loncom/${lonCluster}_hosts.tab for output\n");
1.14 harris41 976: print(OUT $line2insert);
1.13 harris41 977: close(OUT);
1.15 harris41 978: `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;
1.13 harris41 979: # email appropriate message
1.34 albertel 980: `echo "REPLACE:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "REPLACE:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
1.13 harris41 981: }
982: elsif ($hostidexistflag and $lineexistflag) {
1.15 harris41 983: print <<END;
1.52 ! albertel 984: Entry exists in ${lonCluster}_dns_hosts.tab. Making duplicate entry in ${lonCluster}_hosts.tab
1.15 harris41 985: END
1.52 ! albertel 986: `grep -v "$lonHostID:" ../${lonCluster}_hosts.tab > ../new_${lonCluster}_hosts.tab`;
! 987: open(OUT,'>>../new_'.$lonCluster.'_hosts.tab') or
! 988: die("cannot open loncom/${lonCluster}_hosts.tab for output\n");
! 989: print(OUT $line2insert);
! 990: close(OUT);
! 991: `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;
1.15 harris41 992: # email appropriate message
993: `echo "STABLEUPDATE:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "STABLEUPDATE:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
1.13 harris41 994: }
1.15 harris41 995: elsif (!$hostidexistflag and !$lineexistflag) {
996: print <<END;
997: New entry for $lonCluster.
1.6 harris41 998: END
1.15 harris41 999: `cat ../${lonCluster}_hosts.tab > ../new_${lonCluster}_hosts.tab`;
1.21 albertel 1000: open(OUT,'>>../new_'.$lonCluster.'_hosts.tab') or
1001: die("cannot open loncom/new_${lonCluster}_hosts.tab for output\n");
1.15 harris41 1002: print(OUT $line2insert);
1003: close(OUT);
1004: `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;
1005: # email appropriate message
1006: `echo "INSERT:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "INSERT:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
1.27 albertel 1007: }
1008: }
1009: $lineexistflag=0;
1010: if ($flag==1) {
1011: `rm -f ../domain.tab`;
1.52 ! albertel 1012: `rm -f ../dns_domain.tab`;
! 1013: `ln -s ${lonCluster}_dns_domain.tab ../dns_domain.tab`;
! 1014: open(IN,'<../'.$lonCluster.'_dns_domain.tab');
! 1015: while(my $line = <IN>) {
! 1016: if ($line =~/^\Q$domaininsert\E$/) {
1.27 albertel 1017: $lineexistflag=1;
1018: }
1.52 ! albertel 1019: if ($line =~/^\Q$perlvar{'lonDefDomain'}\E\:/) {
1.27 albertel 1020: $domainexistflag=1;
1021: }
1022: }
1023: close(IN);
1024: if ($domainexistflag and !$lineexistflag) {
1025: print <<END;
1026: WARNING: $perlvar{'lonDefDomain'} already exists inside
1.52 ! albertel 1027: loncapa/loncom/${lonCluster}_dns_domain.tab. The entry inside
! 1028: ${lonCluster}_dns_domain.tab does not match your settings.
! 1029: An entry will be made in inside ${lonCluster}_domain.tab
1.27 albertel 1030: with your new values.
1031: END
1032: `grep -v "$perlvar{'lonDefDomain'}:" ../${lonCluster}_domain.tab > ../new_${lonCluster}_domain.tab`;
1033: open(OUT,'>>../new_'.$lonCluster.'_domain.tab') or
1034: die("cannot open loncom/${lonCluster}_domain.tab for output\n");
1035: print(OUT $domaininsert);
1036: close(OUT);
1037: `ln -s new_${lonCluster}_domain.tab ../domain.tab`;
1038: # email appropriate message
1.34 albertel 1039: `echo "REPLACEdom:$lonCluster:$lonHostID:$date:$domaninsert" | mail -s "REPLACEdom:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
1.27 albertel 1040: }
1041: elsif ($domainexistflag and $lineexistflag) {
1.52 ! albertel 1042: `grep -v "$perlvar{'lonDefDomain'}:" ../${lonCluster}_domain.tab > ../new_${lonCluster}_domain.tab`;
! 1043: open(OUT,'>>../new_'.$lonCluster.'_domain.tab') or
! 1044: die("cannot open loncom/${lonCluster}_domain.tab for output\n");
! 1045: print(OUT $domaininsert);
! 1046: close(OUT);
1.27 albertel 1047: print <<END;
1.52 ! albertel 1048: Entry exists in ${lonCluster}_dns_domain.tab. Making duplicate entry in ${lonCluster}_domain.tab
1.27 albertel 1049: END
1.52 ! albertel 1050: `ln -s new_${lonCluster}_domain.tab ../domain.tab`;
1.27 albertel 1051: # email appropriate message
1052: `echo "STABLEUPDATEdom:$lonCluster:$lonHostID:$date:$domaininsert" | mail -s "STABLEUPDATEdom:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
1053: }
1054: elsif (!$domainexistflag and !$lineexistflag) {
1055: print <<END;
1056: New entry for $lonCluster.
1057: END
1058: `cat ../${lonCluster}_domain.tab > ../new_${lonCluster}_domain.tab`;
1059: open(OUT,'>>../new_'.$lonCluster.'_domain.tab') or
1060: die("cannot open loncom/new_${lonCluster}_domain.tab for output\n");
1061: print(OUT $domaininsert);
1062: close(OUT);
1063: `ln -s new_${lonCluster}_domain.tab ../domain.tab`;
1064: # email appropriate message
1065: `echo "INSERTdom:$lonCluster:$lonHostID:$date:$domaininsert" | mail -s "INSERTdom:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
1.6 harris41 1066: }
1067: }
1.1 harris41 1068: }
1069: </perlscript>
1070: </file>
1071: </files>
1072: </piml>
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/back.gif){kind=icon}
Return to updatequery.piml CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [LON-CAPA] / doc / loncapafiles