Annotation of doc/loncapafiles/updatequery.piml, revision 1.60
1.2 harris41 1: <!-- updatequery.piml -->
1.1 harris41 2:
1.60 ! raeburn 3: <!-- $Id: updatequery.piml,v 1.59 2007/12/07 06:01:06 raeburn Exp $ -->
1.1 harris41 4:
5: <!--
6:
7: This file is part of the LearningOnline Network with CAPA (LON-CAPA).
8:
9: LON-CAPA is free software; you can redistribute it and/or modify
10: it under the terms of the GNU General Public License as published by
11: the Free Software Foundation; either version 2 of the License, or
12: (at your option) any later version.
13:
14: LON-CAPA is distributed in the hope that it will be useful,
15: but WITHOUT ANY WARRANTY; without even the implied warranty of
16: MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17: GNU General Public License for more details.
18:
19: You should have received a copy of the GNU General Public License
20: along with LON-CAPA; if not, write to the Free Software
21: Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22:
23: /home/httpd/html/adm/gpl.txt
24:
25: http://www.lon-capa.org/
26:
27: -->
28:
29: <piml>
30: <targetroot>/</targetroot>
31: <files>
32: <file>
1.4 harris41 33: <target dist='default'>/</target>
1.1 harris41 34: <perlscript mode='fg'>
1.4 harris41 35: $|=1;
1.1 harris41 36: print(<<END);
37:
38:
39: *********************************************
40: *********************************************
41: **** ****
42: **** LON-CAPA SYSTEM INFORMATION REQUEST ****
43: **** ****
44: **** Please respond to the choices below ****
45: **** ****
46: *********************************************
47: *********************************************
48:
49: END
1.54 albertel 50: #sleep(3);
1.1 harris41 51: </perlscript>
52: </file>
53: <file>
1.22 albertel 54: <target dist='default'>loncom/hosts.tab</target>
55: <perlscript mode='fg'>
56: unless (-l "<TARGET />") {
57: print(<<END);
58:
59: ===============================================================================
1.30 www 60: Which cluster option would you like to have installed?
61: IMPORTANT: to take advantage of the cluster options 1) and 3),
62: you must contact lon-capa\@lon-capa.org.
63:
64: 1) PRODUCTION - you want to eventually connect this machine to the
65: LON-CAPA content sharing network. This setting is for
66: schools, colleges, and universities, that currently
67: are running - or in the future will run - courses
1.22 albertel 68: 2) STAND-ALONE - you want this machine to run in 'stand-alone' mode and
69: not be connected to other LON-CAPA machines for now
1.30 www 70: 3) DEVELOPMENT - you want to do software (not content!) development with
71: this workstation and eventually link it with the
72: workstations of other LON-CAPA software developers.
1.40 albertel 73: 4) RUNNING YOUR OWN CLUSTER - this machine is not in the standard LON-CAPA
74: clusters and won't be in the future and you want the existing
75: hosts.tab and domain.tab files to be left alone.
76: (This choice is unlikely what you want to select.)
1.22 albertel 77: END
78: # Option number 26 will install rawhide_hosts.tab, but
79: # the typical user does not want to be part of an intensive
80: # machine test cluster.
81:
82: # get input
83: # if valid then process, otherwise loop
84: $flag=0;
85: while (!$flag) {
86: print "ENTER 1, 2, 3, or 4:\n";
87: my $choice=<>;
88: chomp($choice);
89: if ($choice==1) {
90: $lonCluster='production'; $flag=1;
91: }
92: elsif ($choice==2) {
93: $lonCluster='standalone'; $flag=1;
94: }
95: elsif ($choice==3) {
96: $lonCluster='development'; $flag=1;
97: }
98: elsif ($choice==4) {
99: $lonCluster='existing'; $flag=1;
1.52 albertel 100: foreach my $file ('hosts.tab','dns_hosts.tab',
101: 'domain.tab','dns_domain.tab') {
102: if (-e '/home/httpd/lonTabs/'.$file) {
103: `cp /home/httpd/lonTabs/$file ../existing_$file`;
104: }
105: else {
106: print <<END;
107: There is no existing /home/httpd/lonTabs/$file
1.22 albertel 108: END
1.52 albertel 109: die('');
110: }
1.27 albertel 111: }
1.22 albertel 112: }
113: elsif ($choice==26) {
114: $lonCluster='rawhide'; $flag=1;
115: }
116: }
117: }
118: </perlscript>
119: </file>
120: <file>
1.10 harris41 121: <target dist='default'>/home/httpd/lonTabs/hosts.tab</target>
1.1 harris41 122: <perlscript mode='fg'>
1.4 harris41 123: $|=1;
1.20 albertel 124: my $domainDescription;
1.29 albertel 125: my $domainTabExtras;
1.43 raeburn 126: my $primaryLibServer;
1.60 ! raeburn 127: my $protocol;
1.43 raeburn 128: my @libservers = ();
1.1 harris41 129: unless (-e "<TARGET />") {
130: print(<<END);
131: WELCOME TO LON-CAPA!
132:
133: If you have questions, please visit http://install.lon-capa.org
1.32 raeburn 134: or contact helpdesk\@lon-capa.org.
1.1 harris41 135:
136: ===============================================================================
1.4 harris41 137: The following 4 values are needed to configure LON-CAPA:
138: * Machine Role
1.8 harris41 139: * LON-CAPA Domain Name
140: * LON-CAPA Machine ID Name, and
1.47 albertel 141: * Server Administration E-mail Address.
1.32 raeburn 142: ===============================================================================
143:
144: In addition, a Support E-mail Address can also be included. If
145: an address is included then one of the options in the LON-CAPA
146: help menu will be a link to a form that a user will complete to
147: request LON-CAPA help.
148:
1.1 harris41 149: END
1.3 harris41 150:
1.4 harris41 151: open(OUT,'>/tmp/loncapa_updatequery.out');
152: close(OUT);
153:
1.3 harris41 154: # query for Machine Role
155: print(<<END);
156: **** Machine Role ****
157: Library server (recommended if first-time installation of LON-CAPA):
158: Servers that are repositories of authoritative educational resources.
159: These servers also provide the construction space by which instructors
160: assemble their classroom online material.
161: Access server:
162: Servers that load-balance high-traffic delivery of educational resources
163: over the world-wide web.
1.4 harris41 164: 1) Will this be a library server? (recommended if this is your first install)
1.3 harris41 165: 2) Or, will this be an access server?
166: END
1.4 harris41 167: my $flag=0;
168: my $r='';
169: my $lonRole;
170: while (!$flag) {
171: print "ENTER A CHOICE OF 1 or 2:\n";
172: my $choice=<>;
173: chomp($choice);
174: if ($choice==1) {
175: open(OUT,'>>/tmp/loncapa_updatequery.out');
176: print(OUT 'lonRole'."\t".'library'."\n");
177: close(OUT);
178: $lonRole='library';
179: $r='l';
180: $flag=1;
181: }
182: elsif ($choice==2) {
183: open(OUT,'>>/tmp/loncapa_updatequery.out');
184: print(OUT 'lonRole'."\t".'access'."\n");
185: close(OUT);
186: $lonRole='access';
187: $r='a';
188: $flag=2;
189: }
190: else {
191:
192: }
193: }
1.3 harris41 194:
195: # need to recommend a machine ID name (ipdomain.l.somenumber)
1.36 albertel 196: my $hostname=`hostname -f`; chomp($hostname);
1.4 harris41 197: my $ipdomain='';
198: if ($hostname=~/([^\.]*)\.([^\.]*)$/) {
199: $ipdomain=$1;
200: }
1.1 harris41 201:
202: print(<<END);
203:
1.8 harris41 204: **** Domain ****
1.45 www 205: [This does NOT need to correspond to internet address domains.
206: Please make this name short AND descriptive of your organization.
207: Domain names are close to impossible to change later!!!
208: Good examples might be "msu" or "bionet" or "vermontcc".
209: Bad examples are "physics" (too general)
1.37 www 210: or "michiganstateuniversity" (too long)
211: or "msuedu" (internet domain, just make it "msu")
1.45 www 212: or "msuphysics" (only if there is a good reason to limit to department
213: - we don't know of one)
1.37 www 214: or "mydomain" (what is that?)
1.45 www 215: Avoid multiple domains at the same institution, even if it means that you
216: have to actually work together with your colleagues. You can still run
217: multiple library servers within the same domain.
218: If this domain is eventually going to be part of the main production
219: cluster, you MUST contact the LON-CAPA group at MSU (loncapa@loncapa.org)
220: to have a domain name assigned, and then use it exactly as given. This is
221: also true for test installs that might eventually turn into production setups.
222: Stop now if you didn't do so.]
1.1 harris41 223: END
1.8 harris41 224:
225: # get domain name
1.1 harris41 226: # accept if valid, if not valid, tell user and repeat
1.4 harris41 227: $flag=0;
1.8 harris41 228: my $lonDefDomain;
1.4 harris41 229: while (!$flag) {
230: if ($ipdomain) {
231: print(<<END);
1.8 harris41 232: ENTER LONCAPA DOMAIN [$ipdomain]:
1.4 harris41 233: END
234: }
235: else {
236: print(<<END);
1.8 harris41 237: ENTER LONCAPA DOMAIN:
1.4 harris41 238: END
239: }
240: my $choice=<>;
241: chomp($choice);
1.18 harris41 242: my $bad_domain_flag=0;
1.41 albertel 243: my @bad_domain_names=('res','raw','userfiles','priv','adm','uploaded',
244: 'editupload');
1.18 harris41 245: foreach my $bad (@bad_domain_names) {
246: $bad_domain_flag=1 if $choice eq $bad;
247: }
1.37 www 248: if ($choice=~/capa/i) {
249: $bad_domain_flag=1;
250: }
1.8 harris41 251: if ($ipdomain and $choice=~/^\s*$/) {
252: $choice=$ipdomain;
1.4 harris41 253: open(OUT,'>>/tmp/loncapa_updatequery.out');
1.8 harris41 254: print(OUT 'lonDefDomain'."\t".$choice."\n");
1.4 harris41 255: close(OUT);
1.8 harris41 256: $lonDefDomain=$choice;
1.4 harris41 257: $flag=1;
1.51 albertel 258: } elsif (length($choice)>35) {
1.37 www 259: print "Name too long\n";
260: } elsif (length($choice)<2) {
261: print "Name too short\n";
1.38 www 262: } elsif ($bad_domain_flag) {
263: print "Invalid input ('$choice' conflicts with LON-CAPA namespace).\n";
264: print "Please try something different than '$choice'\n";
1.51 albertel 265: } elsif ($choice!~/\_/ and $choice=~/^[\w\-.]+$/) {
1.4 harris41 266: open(OUT,'>>/tmp/loncapa_updatequery.out');
1.8 harris41 267: print(OUT 'lonDefDomain'."\t".$choice."\n");
1.4 harris41 268: close(OUT);
1.8 harris41 269: $lonDefDomain=$choice;
270: $r='l';
1.4 harris41 271: $flag=1;
1.37 www 272: } else {
1.51 albertel 273: print "Invalid input (only alphanumeric characters, '-', and '.' supported).\n";
1.4 harris41 274: }
275: }
1.1 harris41 276:
1.20 albertel 277:
278: # get domain description
279: # accept if valid, if not valid, tell user and repeat
280: $flag=0;
281:
282: while (!$flag) {
283: print(<<END);
284:
285: **** Domain Description ****
286: String describing the domain, to be shown to users.
287: [Example, msu is Michigan State University]
288: ENTER DOMAIN DESCRIPTION:
289: END
290:
291: my $choice=<>;
292: chomp($choice);
293: if ($choice!~/:/) {
294: open(OUT,'>>/tmp/loncapa_updatequery.out');
295: print(OUT 'domainDescription'."\t".$choice."\n");
296: close(OUT);
297: $domainDescription=$choice;
298: $flag=1;
299: }
300: else {
301: print "Invalid input (no ':' allowed).\n";
302: }
303: }
304:
1.8 harris41 305: my $lonHostID;
306: if ($lonDefDomain) {
307: $lonHostID=$lonDefDomain.$r.int(1+rand(9)); # should be probably also detect
308: # against the hosts.tab
309: }
310:
1.1 harris41 311: print(<<END);
312:
1.8 harris41 313: **** Machine ID Name ****
1.45 www 314: [This does NOT need to correspond to internet address names;
1.8 harris41 315: this name MUST be unique to the whole LON-CAPA network;
1.45 www 316: we recommend that you use a name based off of your institution.
317: Good examples: "msul1" or "bioneta2".
318: Bad examples: "loncapabox" or "studentsinside".
1.37 www 319: Note that machine names are very hard to change later.]
1.1 harris41 320: END
1.8 harris41 321: # get machine name
1.1 harris41 322: # accept if valid, if not valid, tell user and repeat
1.4 harris41 323: $flag=0;
324: while (!$flag) {
325: if ($ipdomain) {
326: print(<<END);
1.8 harris41 327: ENTER LONCAPA MACHINE ID [$lonHostID]:
1.4 harris41 328: END
329: }
330: else {
331: print(<<END);
1.8 harris41 332: ENTER LONCAPA MACHINE ID:
1.4 harris41 333: END
334: }
335: my $choice=<>;
336: chomp($choice);
1.37 www 337: if ($choice=~/capa/i) {
338: print "Invalid input (names containing 'capa' are reserved).\n";
339: } elsif ($lonHostID and $choice=~/^\s*$/) {
1.8 harris41 340: $choice=$lonHostID;
1.4 harris41 341: open(OUT,'>>/tmp/loncapa_updatequery.out');
1.8 harris41 342: print(OUT 'lonHostID'."\t".$choice."\n");
1.4 harris41 343: close(OUT);
1.8 harris41 344: $lonHostID=$choice;
1.4 harris41 345: $flag=1;
1.51 albertel 346: } elsif (length($choice)>45) {
1.37 www 347: print "Name too long\n";
348: } elsif (length($choice)<4) {
349: print "Name too short\n";
1.51 albertel 350: } elsif ($choice!~/\_/ and $choice=~/^[\w\-.]+$/) {
1.4 harris41 351: open(OUT,'>>/tmp/loncapa_updatequery.out');
1.8 harris41 352: print(OUT 'lonHostID'."\t".$choice."\n");
1.4 harris41 353: close(OUT);
1.8 harris41 354: $lonHostID=$choice;
1.4 harris41 355: $flag=1;
1.37 www 356: } else {
1.51 albertel 357: print "Invalid input (only alphanumeric characters, '-', and '.' supported).\n";
1.4 harris41 358: }
359: }
1.1 harris41 360:
1.43 raeburn 361: # get primary library server in domain
362: if ($lonRole eq 'library') {
363: if (!grep/^\Q$lonHostID\E$/,@libservers) {
364: push(@libservers,$lonHostID);
365: }
366: if (@libservers == 1) {
367: $primaryLibServer = $libservers[0];
368: }
369: }
370: while (!$flag) {
371: print(<<END);
372: **** Domain's Primary Library Server ID ****
373: This should be the LON-CAPA machine ID of a library server in your
374: domain. If you only have a single library server in your domain, then
375: the Primary Library server ID will be the machine ID of that server.
376: This server will be where domain data which are not associated with any
377: specific home library server will be stored (e.g., e-mail broadcast by
378: administrators to users in the domain).
379: END
380: if (defined($primaryLibServer)) {
381: print(<<END);
382: ENTER DOMAIN'S PRIMARY LIBRARY SERVER ID [$primaryLibServer]:
383: END
384: } elsif (@libservers > 0) {
385: print(<<END);
386: ENTER DOMAIN'S PRIMARY LIBRARY SERVER ID [$libservers[0]]
387: END
388: } else {
389: print (<<END);
390: No library servers could be identified for this domain. If you have already installed LON-CAPA on a different server (designated as a library server) in this domain, please enter the LONCAPA MACHINE ID of that server. If not, you will need to install a LON-CAPA library server. Enter the MACHINE ID of the server you plan to designate as a library server.
391: END
392: }
393:
394: my $choice=<>;
395: chomp($choice);
396: if ($primaryLibServer and $choice=~/^\s*$/) {
397: $choice=$primaryLibServer;
398: open(OUT,'>>/tmp/loncapa_updatequery.out');
399: print(OUT 'primaryLibServer'."\t".$choice."\n");
400: close(OUT);
401: $flag=1;
1.51 albertel 402: } elsif (length($choice)>35) {
1.43 raeburn 403: print "Name too long\n";
404: } elsif (length($choice)<4) {
405: print "Name too short\n";
1.51 albertel 406: } elsif ($choice!~/\_/ and $choice=~/^[\w\-.]+$/) {
1.43 raeburn 407: open(OUT,'>>/tmp/loncapa_updatequery.out');
408: print(OUT 'primaryLibServer'."\t".$choice."\n");
409: close(OUT);
410: $primaryLibServer=$choice;
411: $flag=1;
412: } else {
1.51 albertel 413: print "Invalid input (only alphanumeric characters, '-', and '.' supported).\n";
1.43 raeburn 414: }
415: }
416:
417:
1.32 raeburn 418: # get admin e-mail address
1.4 harris41 419: # accept if valid, if not valid, tell user and repeat
420: $flag=0;
1.9 harris41 421: my $lonAdmEMail;
1.4 harris41 422: while (!$flag) {
1.1 harris41 423: print(<<END);
424:
1.55 albertel 425: **** Server Administrators E-mail ****
1.1 harris41 426: E-mail address of the person who will manage this machine
1.4 harris41 427: [should be in the form somebody\@somewhere]
1.32 raeburn 428: ENTER ADMIN E-MAIL ADDRESS:
1.1 harris41 429: END
430:
1.4 harris41 431: my $choice=<>;
432: chomp($choice);
433: if ($choice=~/\@/) {
434: open(OUT,'>>/tmp/loncapa_updatequery.out');
1.9 harris41 435: print(OUT 'lonAdmEMail'."\t".$choice."\n");
1.4 harris41 436: close(OUT);
1.9 harris41 437: $lonAdmEMail=$choice;
1.4 harris41 438: $flag=1;
439: }
440: else {
441: print "Invalid input (this needs to look like an e-mail address!).\n";
442: }
443: }
444:
1.32 raeburn 445:
446: # get support e-mail address
447: # accept if valid, if not valid, tell user and repeat
448: $flag=0;
449: my $lonSupportEMail;
450: while (!$flag) {
451: print(<<END);
452:
453: **** Support E-mail ****
454: E-mail address of the person who will receive
455: help requests from LON-CAPA users who access
456: the system via this server. If the address is left blank,
457: then a help support form will not be displayed
458: as part of the help menu.
459: [should be in the form somebody\@somewhere]
460: ENTER SUPPORT E-MAIL ADDRESS:
461: END
462:
463: my $choice=<>;
464: chomp($choice);
465: $choice =~ s/\s//g;
1.33 albertel 466: if ( ($choice=~/\@/) || $choice eq '') {
1.32 raeburn 467: open(OUT,'>>/tmp/loncapa_updatequery.out');
468: print(OUT 'lonSupportEMail'."\t".$choice."\n");
469: close(OUT);
470: $lonSupportEMail=$choice;
471: $flag=1;
472: }
473: else {
474: print "Invalid input (this either needs to be blank, or look like an e-mail address!).\n";
475: }
476: }
477:
1.60 ! raeburn 478: while (!$flag) {
! 479: print(<<END);
! 480:
! 481: **** Web Server Protocol ****
! 482: If you plan to run the Apache server with SSL enabled,
! 483: the protocol should be: https; otherwise it should be http.
! 484: ENTER WEB SERVER PROTOCOL:
! 485: END
! 486:
! 487: my $choice=<>;
! 488: chomp($choice);
! 489: if ($choice!~/^https?$/) {
! 490: open(OUT,'>>/tmp/loncapa_updatequery.out');
! 491: print(OUT 'protocol'."\t".$choice."\n");
! 492: close(OUT);
! 493: $protocol=$choice;
! 494: $flag=1;
! 495: }
! 496: else {
! 497: print "Invalid input (only http or https allowed).\n";
! 498: }
! 499: }
1.32 raeburn 500:
1.1 harris41 501: # update loncapa.conf
1.49 raeburn 502: my $confdir = '/etc/httpd/conf/';
1.59 raeburn 503: if ('<DIST />' eq 'sles10' || '<DIST />' eq 'suse10.1' || '<DIST />' eq 'suse10.2' || '<DIST />' eq 'suse10.3') {
1.49 raeburn 504: $confdir = '/etc/apache2/';
505: }
1.5 harris41 506: my $filename='loncapa.conf';
507: my %perlvar;
508: if (-e "$confdir$filename") {
509: open(CONFIG,'<'.$confdir.$filename) or die("Can't read $confdir$filename");
510: while (my $configline=<CONFIG>) {
511: if ($configline =~ /^[^\#]*PerlSetVar/) {
512: my ($unused,$varname,$varvalue)=split(/\s+/,$configline);
513: chomp($varvalue);
1.12 harris41 514: $perlvar{$varname}=$varvalue if $varvalue!~/^\{\[\[\[\[/;
1.5 harris41 515: }
516: }
517: close(CONFIG);
518: }
519: $perlvar{'lonHostID'}=$lonHostID;
520: $perlvar{'lonDefDomain'}=$lonDefDomain;
1.9 harris41 521: $perlvar{'lonAdmEMail'}=$lonAdmEMail;
1.32 raeburn 522: $perlvar{'lonSupportEMail'}=$lonSupportEMail;
1.5 harris41 523: $perlvar{'lonRole'}=$lonRole;
1.16 harris41 524: unless ($perlvar{'lonLoadLim'} and $perlvar{'lonLoadLim'}!~/\{\[\[\[\[/) {
1.5 harris41 525: $perlvar{'lonLoadLim'}='2.00';
526: }
1.25 albertel 527: unless ($perlvar{'lonUserLoadLim'} and $perlvar{'lonUserLoadLim'}!~/\{\[\[\[\[/) {
528: $perlvar{'lonUserLoadLim'}='0';
529: }
1.16 harris41 530: unless ($perlvar{'lonExpire'} and $perlvar{'lonExpire'}!~/\{\[\[\[\[/) {
1.5 harris41 531: $perlvar{'lonExpire'}='86400';
532: }
1.16 harris41 533: unless ($perlvar{'lonReceipt'} and $perlvar{'lonReceipt'}!~/\{\[\[\[\[/) {
1.5 harris41 534: my $lonReceipt='';
1.11 harris41 535: srand(time ^ $$ ^ unpack "%L*", `ps axww | gzip`);
1.5 harris41 536: my @alnum=(0..9,a..z);
537: foreach my $i (1..20) {
538: $lonReceipt.=$alnum[int(rand(36))];
539: }
540: $perlvar{'lonReceipt'}=$lonReceipt;
541: }
542: open(OUT,">$confdir$filename") or
543: die("Cannot output to $confdir$filename\n");
544: foreach my $key (keys %perlvar) {
545: my $value=$perlvar{$key};
1.49 raeburn 546: my $line = "PerlSetVar $key $value";
547: if ($value eq '') {
548: $line = '#'.$line;
549: }
1.5 harris41 550: print(OUT <<END);
1.49 raeburn 551: $line
1.5 harris41 552: END
553: }
554: close(OUT);
1.1 harris41 555: }
556: </perlscript>
557: </file>
558: <file>
1.49 raeburn 559: <target dist='default'>/etc/httpd/conf/</target>
1.59 raeburn 560: <target dist='sles10 suse10.1 suse10.2 suse10.3'>/etc/apache2/</target>
1.1 harris41 561: <perlscript mode='fg'>
1.31 albertel 562: sub securesetting {
563: my (%perlvar)=@_;
564: my $securestatus='unknown';
565: my $securenum='';
566: if ( $perlvar{'loncAllowInsecure'}&& $perlvar{'londAllowInsecure'}) {
567: $securestatus='no'; $securenum='4';
568: } elsif ( $perlvar{'loncAllowInsecure'}&& !$perlvar{'londAllowInsecure'}) {
569: $securestatus='lond'; $securenum='3';
570: } elsif (!$perlvar{'loncAllowInsecure'}&& $perlvar{'londAllowInsecure'}) {
571: $securestatus='lonc'; $securenum='2';
572: } elsif (!$perlvar{'loncAllowInsecure'}&& !$perlvar{'londAllowInsecure'}) {
573: $securestatus='yes (lond and lonc)'; $securenum='1';
574: }
575: return ($securestatus,$securenum);
576: }
1.1 harris41 577: # read values from loncapa.conf
1.49 raeburn 578: my $confdir = "<TARGET />";
1.5 harris41 579: my $filename='loncapa.conf';
580: my %perlvar;
1.31 albertel 581: my ($securestatus,$securenum);
1.5 harris41 582: if (-e "$confdir$filename") {
583: open(CONFIG,'<'.$confdir.$filename) or
584: die("Can't read $confdir$filename");
585: while (my $configline=<CONFIG>) {
586: if ($configline =~ /^[^\#]*PerlSetVar/) {
587: my ($unused,$varname,$varvalue)=split(/\s+/,$configline);
588: chomp($varvalue);
589: $perlvar{$varname}=$varvalue;
590: }
591: }
592: close(CONFIG);
593: }
1.16 harris41 594: unless ($perlvar{'lonLoadLim'} and $perlvar{'lonLoadLim'}!~/\{\[\[\[\[/) {
595: $perlvar{'lonLoadLim'}='2.00';
596: }
1.25 albertel 597: unless ($perlvar{'lonUserLoadLim'} and $perlvar{'lonUserLoadLim'}!~/\{\[\[\[\[/) {
598: $perlvar{'lonUserLoadLim'}='0';
599: }
1.16 harris41 600: unless ($perlvar{'lonExpire'} and $perlvar{'lonExpire'}!~/\{\[\[\[\[/) {
601: $perlvar{'lonExpire'}='86400';
602: }
1.31 albertel 603: unless ($perlvar{'londAllowInsecure'} and $perlvar{'londAllowInsecure'}!~/\{\[\[\[\[/) {
604: $perlvar{'londAllowInsecure'}='1';
605: }
606: unless ($perlvar{'loncAllowInsecure'} and $perlvar{'loncAllowInsecure'}!~/\{\[\[\[\[/) {
607: $perlvar{'loncAllowInsecure'}='1';
608: }
609: ($securestatus,$securenum)=&securesetting(%perlvar);
1.16 harris41 610: unless ($perlvar{'lonReceipt'} and $perlvar{'lonReceipt'}!~/\{\[\[\[\[/) {
611: my $lonReceipt='';
612: srand(time ^ $$ ^ unpack "%L*", `ps axww | gzip`);
613: my @alnum=(0..9,a..z);
614: foreach my $i (1..20) {
615: $lonReceipt.=$alnum[int(rand(36))];
616: }
617: $perlvar{'lonReceipt'}=$lonReceipt;
618: }
1.7 harris41 619: my %perlvarstatic;
620: if (-e "${confdir}loncapa_apache.conf") {
621: open(CONFIG,'<'.$confdir.'loncapa_apache.conf') or
622: die("Can't read ${confdir}loncapa_apache.conf");
623: while (my $configline=<CONFIG>) {
624: if ($configline =~ /^[^\#]*PerlSetVar/) {
625: my ($unused,$varname,$varvalue)=split(/\s+/,$configline);
626: chomp($varvalue);
627: $perlvarstatic{$varname}=$varvalue;
628: }
629: }
630: close(CONFIG);
631: }
1.55 albertel 632:
633: my (@hosts_files, @domain_files);
634: if ( $lonCluster ne 'existing') {
635: push(@domain_files,'../'.$lonCluster.'_domain.tab',
636: '../'.$lonCluster.'_dns_domain.tab');
637: push(@hosts_files,'../'.$lonCluster.'_hosts.tab',
638: '../'.$lonCluster.'_dns_hosts.tab');
639: }
640: push(@domain_files,'/home/httpd/lonTabs/domain.tab',
641: '/home/httpd/lonTabs/dns_domain.tab');
642: push(@hosts_files,'/home/httpd/lonTabs/hosts.tab',
643: '/home/httpd/lonTabs/dns_hosts.tab');
644:
1.23 albertel 645: if (!$domainDescription) {
1.55 albertel 646: foreach my $file (@domain_files) {
647: open(IN,'<'.$file);
648: while(my $line = <IN>) {
649: if ($line =~ /^\Q$perlvar{'lonDefDomain'}\E\:/) {
650: (undef,$domainDescription,$domainTabExtras)=split(/:/,$line,3);
651: chomp($domainDescription);
652: chomp($domainTabExtras);
1.60 ! raeburn 653: # the remaining field (primary lib server) is handled later
1.55 albertel 654: $domainTabExtras = join(':',(split(/:/,$domainTabExtras))[0..5]);
655: last;
656: }
657: }
658: close(IN);
659: last if ($domainDescription);
660: }
1.23 albertel 661: }
1.55 albertel 662:
1.60 ! raeburn 663: if (!$protocol) {
! 664: foreach my $file (@hosts_files) {
! 665: open(IN,'<'.$file);
! 666: while(my $line = <IN>) {
! 667: if ($line =~ /^\Q$perlvar{'lonHostID'}\E:\Q$perlvar{'lonDefDomain'}\E\:(?:access|library)\:(https?)/) {
! 668: $protocol = $1;
! 669: last;
! 670: }
! 671: }
! 672: }
! 673: }
! 674:
! 675: if (!$protocol) {
! 676: $protocol = 'http';
! 677: }
! 678:
1.55 albertel 679: while(!$primaryLibServ && (@hosts_file || @domain_files)) {
680: my $file = shift(@domain_files);
681: open(IN,'<'.$file);
682: while(my $line = <IN>) {
683: if ($line =~ /^\Q$perlvar{'lonDefDomain'}\E\:/) {
684: $primaryLibServer=(split(/:/,$line))[8];
1.43 raeburn 685: chomp($primaryLibServer);
686: }
687: }
688: close(IN);
1.55 albertel 689: last if ($primaryLibServer);
690: $file = shift(@hosts_files);
691: open(IN,'<'.$file);
692: while(my $line = <IN>) {
693: if ($line =~ /^([^\:]+)\:\Q$perlvar{'lonDefDomain'}\E\:library\:/) {
694: push(@libservers,$1);
695: }
696: }
1.58 albertel 697: # make list unique
698: @libservers = keys(%{{ map { $_ => 1 } (@libservers) }});
1.55 albertel 699: close(IN);
700: if (@libservers == 1) {
701: $primaryLibServer = $libservers[0];
702: }
1.43 raeburn 703: }
1.23 albertel 704:
1.6 harris41 705: # implement editing logic below, interactively
1.60 ! raeburn 706: # update loncapa.conf until 13 is entered
1.6 harris41 707:
708: $flag=0;
1.17 harris41 709:
1.6 harris41 710: while (!$flag) {
1.1 harris41 711: print(<<END);
712:
713: ===============================================================================
714: This is now the current configuration of your machine.
1.31 albertel 715: 1) Domain Name: $perlvar{'lonDefDomain'}
716: 2) Domain Description: $domainDescription
717: 3) Machine Name: $perlvar{'lonHostID'}
1.43 raeburn 718: 4) ID of primary library server for domain: $primaryLibServer
1.47 albertel 719: 5) Server Administrator's E-mail Address: $perlvar{'lonAdmEMail'}
1.43 raeburn 720: 6) Support E-mail Address: $perlvar{'lonSupportEMail'}
1.60 ! raeburn 721: 7) Web Server Protocol (http or https): $protocol
! 722: 8) Role: $perlvar{'lonRole'}
! 723: 9) Cache Expiration Time: $perlvar{'lonExpire'}
! 724: 10) Server Load: $perlvar{'lonLoadLim'}
! 725: 11) User Load: $perlvar{'lonUserLoadLim'}
! 726: 12) Allow only secure connections: $securestatus
! 727: 13) Everything is correct up above
1.6 harris41 728: END
1.38 www 729:
1.54 albertel 730: my @error;
1.38 www 731: foreach my $v ($perlvar{'lonDefDomain'},$perlvar{'lonHostID'}) {
1.51 albertel 732: if (length($v)>35) { $error.="\nName $v too long"; }
1.38 www 733: if (length($v)<2) { $error.="\nName $v too short"; }
1.39 albertel 734: if ($v=~/capa/i) {
735: if ($v!~/^oucapa\d+$/ &&
736: ($v!~/^capa\d+$/ && $perlvar{'lonDefDomain'} eq 'uwsp')) {
1.54 albertel 737: push(@error,"Name $v contains 'capa'");
1.39 albertel 738: }
739: }
1.41 albertel 740: foreach my $bad ('res','raw','userfiles','priv','adm','uploaded',
741: 'editupload') {
1.54 albertel 742: push(@error,"\nName $v reserved.") if $v eq $bad;
1.38 www 743: }
1.54 albertel 744: if ($v=~/[^\w\-.]/) { push(@error,"Name $v contains special characters"); }
1.38 www 745: }
1.53 albertel 746: if ($domainDescription =~ /^\s*$/) {
1.54 albertel 747: push(@error,"Domain Description is blank.");
1.53 albertel 748: } elsif ($domainDescription!~/^[\(\)\-\w\s,]+$/) {
1.54 albertel 749: push(@error,"Domain Description contains special characters.");
1.38 www 750: }
751: foreach my $v ($perlvar{'lonExpire'},$perlvar{'lonLoadLim'}) {
1.54 albertel 752: unless ($v=~/^[\d+\.]+$/) { push(@error,"Number expected instead of $v"); }
1.38 www 753: }
754: unless (($perlvar{'lonRole'} eq 'library') || ($perlvar{'lonRole'} eq 'access')) {
1.54 albertel 755: push(@error,"Invalid Role");
1.17 harris41 756: }
1.43 raeburn 757:
1.60 ! raeburn 758: unless (($protocol eq 'http') || ($protocol eq 'https')) {
! 759: push(@error,"Invalid Protocol (must be http or https");
! 760: }
! 761:
1.43 raeburn 762: if (!defined($primaryLibServer)) {
763: if (@libservers > 0) {
1.54 albertel 764: push(@error,"No primary library server ID designated. Choose from: ".join(',',sort(@libservers)));
1.43 raeburn 765: } else {
1.54 albertel 766: push(@error,"No library servers in this domain (including current server)");
1.43 raeburn 767: }
768: } else {
1.54 albertel 769: if (length($primaryLibServer)>35) { push(@error,"Primary Library Server ID: $primaryLibServer too long"); }
770: if (length($primaryLibServer)<2) { push(@error,"Primary Library Server ID: $primaryLibServer too short"); }
1.43 raeburn 771: if ($primaryLibServer =~/capa/i) {
772: if ($primaryLibServer!~/^oucapa\d+$/ &&
773: ($primaryLibServer!~/^capa\d+$/ && $perlvar{'lonDefDomain'} eq 'uwsp')) {
1.54 albertel 774: push(@error,"Primary library server ID $primaryLibServer contains 'capa'")
1.43 raeburn 775: }
776: }
777: foreach my $bad ('res','raw','userfiles','priv','adm','uploaded',
778: 'editupload') {
1.54 albertel 779: push(@error,"Primary library server ID $primaryLibServer reserved.") if $primaryLibServer eq $bad;
1.43 raeburn 780: }
1.54 albertel 781: if ($primaryLibServer=~/[^\w\-.]/) { push(@error,"Primary library server ID $primaryLibServer contains special characters"); }
1.43 raeburn 782: }
783:
784:
1.54 albertel 785: if (@error) { print "\n*** ERRORS: \n\t".join("\n\t",@error)."\n"; }
1.6 harris41 786: print(<<END);
1.60 ! raeburn 787: ENTER A CHOICE OF 1-12 TO CHANGE, otherwise ENTER 13:
1.1 harris41 788: END
1.5 harris41 789: my $choice=<>;
790: chomp($choice);
1.6 harris41 791: if ($choice==1) {
792: print(<<END);
1.16 harris41 793: 1) Domain Name: $perlvar{'lonDefDomain'}
1.20 albertel 794: ENTER NEW VALUE (this is an internal value used to identify a group of
795: LON-CAPA machines, it must be alphanumerical, we suggest
796: using a part of your actual DNS domain. For example, for
797: the machine loncapa.msu.edu, we set the Domain to msu):
1.6 harris41 798: END
799: my $choice2=<>;
800: chomp($choice2);
1.8 harris41 801: $perlvar{'lonDefDomain'}=$choice2;
1.6 harris41 802: }
803: elsif ($choice==2) {
804: print(<<END);
1.20 albertel 805: 2) Domain Description: $domainDescription
806: ENTER NEW VALUE (this should be a string that describes your domain, spaces
807: and punctuation are fine except for ':'):
808: END
809: my $choice2=<>;
810: chomp($choice2);
811: $domainDescription=$choice2;
812: }
813: elsif ($choice==3) {
814: print(<<END);
815: 3) Machine Name: $perlvar{'lonHostID'}
816: ENTER NEW VALUE (this will be the name of the machine in the LON-CAPA network
817: it cannot contain any of '_' '-' '.' or ':'. We suggest that
818: if you are in the domain 'example' and are the first library
819: server you enter 'examplel1') :
1.6 harris41 820: END
821: my $choice2=<>;
822: chomp($choice2);
1.8 harris41 823: $perlvar{'lonHostID'}=$choice2;
1.6 harris41 824: }
1.20 albertel 825: elsif ($choice==4) {
1.6 harris41 826: print(<<END);
1.43 raeburn 827: 4) ID of primary library server for domain: $primaryLibServer
828: ENTER NEW VALUE (this will be the LON-CAPA Machine ID of a library server in
829: your domain; it cannot contain any of '_' '-' '.' or ':'.
830: This server will be where domain data which are not
831: associated with any specific home library server
832: will be stored (e.g., e-mail broadcast by Domain Coordinators
833: to users in the domain).
834: END
835: my $choice2=<>;
836: chomp($choice2);
837: $primaryLibServer=$choice2;
838: }
839: elsif ($choice==5) {
840: print(<<END);
1.47 albertel 841: 5) Server Administrator's E-mail Address: $perlvar{'lonAdmEMail'}
1.6 harris41 842: ENTER NEW VALUE:
843: END
844: my $choice2=<>;
845: chomp($choice2);
1.9 harris41 846: $perlvar{'lonAdmEMail'}=$choice2;
1.6 harris41 847: }
1.43 raeburn 848: elsif ($choice==6) {
1.6 harris41 849: print(<<END);
1.43 raeburn 850: 6) Support E-mail Address: $perlvar{'lonSupportEMail'}
1.32 raeburn 851: ENTER NEW VALUE:
852: END
853: my $choice2=<>;
854: chomp($choice2);
855: $perlvar{'lonSupportEMail'}=$choice2;
856: }
1.43 raeburn 857: elsif ($choice==7) {
1.32 raeburn 858: print(<<END);
1.60 ! raeburn 859: 7) Server Protocol (http or https):
! 860: ENTER NEW VALUE: (this should be either 'http' or 'https'
! 861: if in doubt set to 'http'):
! 862: END
! 863: my $choice2=<>;
! 864: chomp($choice2);
! 865: $protocol=$choice2;
! 866: }
! 867: elsif ($choice==8) {
! 868: print(<<END);
! 869: 8) Role: $perlvar{'lonRole'}
1.20 albertel 870: ENTER NEW VALUE (this should be either 'access' or 'library'
871: if in doubt select 'library'):
1.6 harris41 872: END
873: my $choice2=<>;
874: chomp($choice2);
875: $perlvar{'lonRole'}=$choice2;
876: }
1.60 ! raeburn 877: elsif ($choice==9) {
1.6 harris41 878: print(<<END);
1.60 ! raeburn 879: 9) Cache Expiration Time: $perlvar{'lonExpire'}
1.20 albertel 880: ENTER NEW VALUE (in seconds, 86400 is a reasonable value):
1.6 harris41 881: END
882: my $choice2=<>;
883: chomp($choice2);
884: $perlvar{'lonExpire'}=$choice2;
885: }
1.60 ! raeburn 886: elsif ($choice==10) {
1.6 harris41 887: print(<<END);
1.60 ! raeburn 888: 10) Server Load: $perlvar{'lonLoadLim'}
1.6 harris41 889: ENTER NEW VALUE:
890: END
891: my $choice2=<>;
892: chomp($choice2);
893: $perlvar{'lonLoadLim'}=$choice2;
894: }
1.60 ! raeburn 895: elsif ($choice==11) {
1.25 albertel 896: print(<<END);
1.60 ! raeburn 897: 11) User Load: $perlvar{'lonUserLoadLim'}
1.25 albertel 898: Numer of users that can login before machine is 'overloaded'
1.26 albertel 899: ENTER NEW VALUE (integer value, 0 means there is no limit):
1.25 albertel 900: END
901: my $choice2=<>;
902: chomp($choice2);
903: $perlvar{'lonUserLoadLim'}=$choice2;
904: }
1.60 ! raeburn 905: elsif ($choice==12) {
1.31 albertel 906: print(<<END);
1.60 ! raeburn 907: 12) Allow only secure connections: $securestatus
1.31 albertel 908: The Lon-CAPA communication daemons lonc and lond can be configured to
909: allow only secure connections by default.
910:
911: POSSIBLE CHOICES:
912: 1) allow only secure connections and don't connect to machines that
913: can not be connected to securely
914: 2) allow only secure connections but allow this machine to connect to
915: machines that don't support secure connections
916: 3) allow insecure connections to this machine but only allow connections
917: to machines that support secure connections
918: 4) allow insecure connections
919: ENTER NEW VALUE (currenly $securenum):
920: END
921: my $choice2=<>;
922: chomp($choice2);
923: if ($choice2 eq '1') {
924: $perlvar{'loncAllowInsecure'}=0;$perlvar{'londAllowInsecure'}=0;
925: } elsif ($choice2 eq '2') {
926: $perlvar{'loncAllowInsecure'}=0;$perlvar{'londAllowInsecure'}=1;
927: } elsif ($choice2 eq '3') {
928: $perlvar{'loncAllowInsecure'}=1;$perlvar{'londAllowInsecure'}=0;
929: } elsif ($choice2 eq '4') {
930: $perlvar{'loncAllowInsecure'}=1;$perlvar{'londAllowInsecure'}=1;
931: }
932: ($securestatus,$securenum)=&securesetting(%perlvar);
933: }
1.60 ! raeburn 934: elsif (($choice==13) && (!$error)) {
1.6 harris41 935: $flag=1;
936: }
937: else {
1.38 www 938: print "Invalid input.\n";
1.6 harris41 939: }
940: }
1.7 harris41 941: open(OUT,">$confdir$filename") or
942: die("Cannot output to $confdir$filename\n");
943: foreach my $key (keys %perlvar) {
944: my $value=$perlvar{$key};
1.49 raeburn 945: my $line = "PerlSetVar $key $value";
946: if ($value eq '') {
947: $line = '#'.$line;
948: }
1.8 harris41 949: print(OUT <<END) unless $perlvarstatic{$key};
1.49 raeburn 950: $line
1.7 harris41 951: END
952: }
953: close(OUT);
1.1 harris41 954: </perlscript>
955: </file>
956: <file>
957: <target dist='default'>loncom/hosts.tab</target>
958: <perlscript mode='fg'>
959: unless (-l "<TARGET />") {
1.36 albertel 960: my $hostname=`hostname -f`;chomp($hostname);
1.15 harris41 961: $date=`date -I`; chomp($date);
962: $lonHostID=$perlvar{'lonHostID'};
1.51 albertel 963: $lonHostID=~s/[^\w\-.]//g;
1.15 harris41 964: $lineexistflag=0;
965: $hostidexistflag=0;
1.22 albertel 966: $line2insert=<<END;
1.60 ! raeburn 967: $perlvar{'lonHostID'}:$perlvar{'lonDefDomain'}:$perlvar{'lonRole'}:$hostname:$protocol
1.15 harris41 968: END
1.57 albertel 969: if (!$domainTabExtras) {
970: $domainTabExtras=':::::';
971: }
1.43 raeburn 972: $domaininsert="$perlvar{'lonDefDomain'}:$domainDescription:$domainTabExtras:$primaryLibServer\n";
1.23 albertel 973: if ($lonCluster eq 'standalone') {
974: open(OUT,'>../'.$lonCluster.'_hosts.tab') or
975: die('file generation error');
976: print(OUT $line2insert);
1.60 ! raeburn 977: print OUT ("^$hostname:$protocol\n");
1.52 albertel 978: close(OUT);
979: open(OUT,'>../'.$lonCluster.'_dns_hosts.tab') or
980: die('file generation error');
981: print(OUT $line2insert);
1.23 albertel 982: close(OUT);
1.27 albertel 983: open(OUT,'>../'.$lonCluster.'_domain.tab') or
984: die('file generation error');
985: print(OUT $domaininsert);
986: close(OUT);
1.52 albertel 987: open(OUT,'>../'.$lonCluster.'_dns_domain.tab') or
988: die('file generation error');
989: print(OUT $domaininsert);
990: close(OUT);
1.23 albertel 991: }
1.15 harris41 992: if ($flag==1) {
1.6 harris41 993: `rm -f ../hosts.tab`;
1.52 albertel 994: `rm -f ../dns_hosts.tab`;
995: `ln -s ${lonCluster}_dns_hosts.tab ../dns_hosts.tab`;
996: open(IN,'<../'.$lonCluster.'_dns_hosts.tab');
997: while(my $line = <IN>) {
998: if ($line =~ /^\Q$line2insert\E$/) {
1.13 harris41 999: $lineexistflag=1;
1000: }
1.52 albertel 1001: if ($line =~ /^\Q$lonHostID\E\:/) {
1.13 harris41 1002: $hostidexistflag=1;
1003: }
1004: }
1005: close(IN);
1006: if ($hostidexistflag and !$lineexistflag) {
1007: print <<END;
1008: WARNING: $lonHostID already exists inside
1.52 albertel 1009: loncapa/loncom/${lonCluster}_dns_hosts.tab. The entry inside
1010: ${lonCluster}_dns_hosts.tab does not match your settings.
1011: An entry inside ${lonCluster}_hosts.tab will be made
1.13 harris41 1012: with your new values.
1013: END
1.15 harris41 1014: `grep -v "$lonHostID:" ../${lonCluster}_hosts.tab > ../new_${lonCluster}_hosts.tab`;
1015: open(OUT,'>>../new_'.$lonCluster.'_hosts.tab') or
1016: die("cannot open loncom/${lonCluster}_hosts.tab for output\n");
1.14 harris41 1017: print(OUT $line2insert);
1.13 harris41 1018: close(OUT);
1.15 harris41 1019: `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;
1.13 harris41 1020: # email appropriate message
1.60 ! raeburn 1021: `echo "REPLACE:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "REPLACE:$lonCluster:$lonHostID:$protocol:$date" installrecord\@mail.lon-capa.org`;
1.13 harris41 1022: }
1023: elsif ($hostidexistflag and $lineexistflag) {
1.15 harris41 1024: print <<END;
1.52 albertel 1025: Entry exists in ${lonCluster}_dns_hosts.tab. Making duplicate entry in ${lonCluster}_hosts.tab
1.15 harris41 1026: END
1.52 albertel 1027: `grep -v "$lonHostID:" ../${lonCluster}_hosts.tab > ../new_${lonCluster}_hosts.tab`;
1028: open(OUT,'>>../new_'.$lonCluster.'_hosts.tab') or
1029: die("cannot open loncom/${lonCluster}_hosts.tab for output\n");
1030: print(OUT $line2insert);
1031: close(OUT);
1032: `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;
1.15 harris41 1033: # email appropriate message
1.60 ! raeburn 1034: `echo "STABLEUPDATE:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "STABLEUPDATE:$lonCluster:$lonHostID:$protocol:$date" installrecord\@mail.lon-capa.org`;
1.13 harris41 1035: }
1.15 harris41 1036: elsif (!$hostidexistflag and !$lineexistflag) {
1037: print <<END;
1038: New entry for $lonCluster.
1.6 harris41 1039: END
1.15 harris41 1040: `cat ../${lonCluster}_hosts.tab > ../new_${lonCluster}_hosts.tab`;
1.21 albertel 1041: open(OUT,'>>../new_'.$lonCluster.'_hosts.tab') or
1042: die("cannot open loncom/new_${lonCluster}_hosts.tab for output\n");
1.15 harris41 1043: print(OUT $line2insert);
1044: close(OUT);
1045: `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;
1046: # email appropriate message
1.60 ! raeburn 1047: `echo "INSERT:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "INSERT:$lonCluster:$lonHostID:$protocol:$date" installrecord\@mail.lon-capa.org`;
1.27 albertel 1048: }
1049: }
1050: $lineexistflag=0;
1051: if ($flag==1) {
1052: `rm -f ../domain.tab`;
1.52 albertel 1053: `rm -f ../dns_domain.tab`;
1054: `ln -s ${lonCluster}_dns_domain.tab ../dns_domain.tab`;
1055: open(IN,'<../'.$lonCluster.'_dns_domain.tab');
1056: while(my $line = <IN>) {
1057: if ($line =~/^\Q$domaininsert\E$/) {
1.27 albertel 1058: $lineexistflag=1;
1059: }
1.52 albertel 1060: if ($line =~/^\Q$perlvar{'lonDefDomain'}\E\:/) {
1.27 albertel 1061: $domainexistflag=1;
1062: }
1063: }
1064: close(IN);
1065: if ($domainexistflag and !$lineexistflag) {
1066: print <<END;
1067: WARNING: $perlvar{'lonDefDomain'} already exists inside
1.52 albertel 1068: loncapa/loncom/${lonCluster}_dns_domain.tab. The entry inside
1069: ${lonCluster}_dns_domain.tab does not match your settings.
1070: An entry will be made in inside ${lonCluster}_domain.tab
1.27 albertel 1071: with your new values.
1072: END
1073: `grep -v "$perlvar{'lonDefDomain'}:" ../${lonCluster}_domain.tab > ../new_${lonCluster}_domain.tab`;
1074: open(OUT,'>>../new_'.$lonCluster.'_domain.tab') or
1075: die("cannot open loncom/${lonCluster}_domain.tab for output\n");
1076: print(OUT $domaininsert);
1077: close(OUT);
1078: `ln -s new_${lonCluster}_domain.tab ../domain.tab`;
1079: # email appropriate message
1.34 albertel 1080: `echo "REPLACEdom:$lonCluster:$lonHostID:$date:$domaninsert" | mail -s "REPLACEdom:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
1.27 albertel 1081: }
1082: elsif ($domainexistflag and $lineexistflag) {
1.52 albertel 1083: `grep -v "$perlvar{'lonDefDomain'}:" ../${lonCluster}_domain.tab > ../new_${lonCluster}_domain.tab`;
1084: open(OUT,'>>../new_'.$lonCluster.'_domain.tab') or
1085: die("cannot open loncom/${lonCluster}_domain.tab for output\n");
1086: print(OUT $domaininsert);
1087: close(OUT);
1.27 albertel 1088: print <<END;
1.52 albertel 1089: Entry exists in ${lonCluster}_dns_domain.tab. Making duplicate entry in ${lonCluster}_domain.tab
1.27 albertel 1090: END
1.52 albertel 1091: `ln -s new_${lonCluster}_domain.tab ../domain.tab`;
1.27 albertel 1092: # email appropriate message
1093: `echo "STABLEUPDATEdom:$lonCluster:$lonHostID:$date:$domaininsert" | mail -s "STABLEUPDATEdom:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
1094: }
1095: elsif (!$domainexistflag and !$lineexistflag) {
1096: print <<END;
1097: New entry for $lonCluster.
1098: END
1099: `cat ../${lonCluster}_domain.tab > ../new_${lonCluster}_domain.tab`;
1100: open(OUT,'>>../new_'.$lonCluster.'_domain.tab') or
1101: die("cannot open loncom/new_${lonCluster}_domain.tab for output\n");
1102: print(OUT $domaininsert);
1103: close(OUT);
1104: `ln -s new_${lonCluster}_domain.tab ../domain.tab`;
1105: # email appropriate message
1106: `echo "INSERTdom:$lonCluster:$lonHostID:$date:$domaininsert" | mail -s "INSERTdom:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
1.6 harris41 1107: }
1108: }
1.1 harris41 1109: }
1110: </perlscript>
1111: </file>
1112: </files>
1113: </piml>
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/back.gif){kind=icon}
Return to updatequery.piml CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [LON-CAPA] / doc / loncapafiles