Annotation of doc/loncapafiles/updatequery.piml, revision 1.66
1.2 harris41 1: <!-- updatequery.piml -->
1.1 harris41 2:
1.66 ! raeburn 3: <!-- $Id: updatequery.piml,v 1.65 2010/07/21 00:32:44 raeburn Exp $ -->
1.1 harris41 4:
5: <!--
6:
7: This file is part of the LearningOnline Network with CAPA (LON-CAPA).
8:
9: LON-CAPA is free software; you can redistribute it and/or modify
10: it under the terms of the GNU General Public License as published by
11: the Free Software Foundation; either version 2 of the License, or
12: (at your option) any later version.
13:
14: LON-CAPA is distributed in the hope that it will be useful,
15: but WITHOUT ANY WARRANTY; without even the implied warranty of
16: MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17: GNU General Public License for more details.
18:
19: You should have received a copy of the GNU General Public License
20: along with LON-CAPA; if not, write to the Free Software
21: Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22:
23: /home/httpd/html/adm/gpl.txt
24:
25: http://www.lon-capa.org/
26:
27: -->
28:
29: <piml>
30: <targetroot>/</targetroot>
31: <files>
32: <file>
1.4 harris41 33: <target dist='default'>/</target>
1.1 harris41 34: <perlscript mode='fg'>
1.4 harris41 35: $|=1;
1.1 harris41 36: print(<<END);
37:
38:
39: *********************************************
40: *********************************************
41: **** ****
42: **** LON-CAPA SYSTEM INFORMATION REQUEST ****
43: **** ****
44: **** Please respond to the choices below ****
45: **** ****
46: *********************************************
47: *********************************************
48:
49: END
1.54 albertel 50: #sleep(3);
1.1 harris41 51: </perlscript>
52: </file>
53: <file>
1.22 albertel 54: <target dist='default'>loncom/hosts.tab</target>
55: <perlscript mode='fg'>
56: unless (-l "<TARGET />") {
57: print(<<END);
58:
59: ===============================================================================
1.30 www 60: Which cluster option would you like to have installed?
61: IMPORTANT: to take advantage of the cluster options 1) and 3),
62: you must contact lon-capa\@lon-capa.org.
63:
64: 1) PRODUCTION - you want to eventually connect this machine to the
65: LON-CAPA content sharing network. This setting is for
66: schools, colleges, and universities, that currently
67: are running - or in the future will run - courses
1.22 albertel 68: 2) STAND-ALONE - you want this machine to run in 'stand-alone' mode and
69: not be connected to other LON-CAPA machines for now
1.30 www 70: 3) DEVELOPMENT - you want to do software (not content!) development with
71: this workstation and eventually link it with the
72: workstations of other LON-CAPA software developers.
1.40 albertel 73: 4) RUNNING YOUR OWN CLUSTER - this machine is not in the standard LON-CAPA
74: clusters and won't be in the future and you want the existing
75: hosts.tab and domain.tab files to be left alone.
76: (This choice is unlikely what you want to select.)
1.22 albertel 77: END
78: # Option number 26 will install rawhide_hosts.tab, but
79: # the typical user does not want to be part of an intensive
80: # machine test cluster.
81:
82: # get input
83: # if valid then process, otherwise loop
84: $flag=0;
85: while (!$flag) {
86: print "ENTER 1, 2, 3, or 4:\n";
87: my $choice=<>;
88: chomp($choice);
89: if ($choice==1) {
90: $lonCluster='production'; $flag=1;
91: }
92: elsif ($choice==2) {
93: $lonCluster='standalone'; $flag=1;
94: }
95: elsif ($choice==3) {
96: $lonCluster='development'; $flag=1;
97: }
98: elsif ($choice==4) {
99: $lonCluster='existing'; $flag=1;
1.52 albertel 100: foreach my $file ('hosts.tab','dns_hosts.tab',
101: 'domain.tab','dns_domain.tab') {
102: if (-e '/home/httpd/lonTabs/'.$file) {
103: `cp /home/httpd/lonTabs/$file ../existing_$file`;
104: }
105: else {
106: print <<END;
107: There is no existing /home/httpd/lonTabs/$file
1.22 albertel 108: END
1.52 albertel 109: die('');
110: }
1.27 albertel 111: }
1.22 albertel 112: }
113: elsif ($choice==26) {
114: $lonCluster='rawhide'; $flag=1;
115: }
116: }
117: }
118: </perlscript>
119: </file>
120: <file>
1.10 harris41 121: <target dist='default'>/home/httpd/lonTabs/hosts.tab</target>
1.1 harris41 122: <perlscript mode='fg'>
1.4 harris41 123: $|=1;
1.20 albertel 124: my $domainDescription;
1.29 albertel 125: my $domainTabExtras;
1.43 raeburn 126: my $primaryLibServer;
1.60 raeburn 127: my $protocol;
1.65 raeburn 128: my $intdom;
1.43 raeburn 129: my @libservers = ();
1.1 harris41 130: unless (-e "<TARGET />") {
131: print(<<END);
132: WELCOME TO LON-CAPA!
133:
134: If you have questions, please visit http://install.lon-capa.org
1.32 raeburn 135: or contact helpdesk\@lon-capa.org.
1.1 harris41 136:
137: ===============================================================================
1.4 harris41 138: The following 4 values are needed to configure LON-CAPA:
139: * Machine Role
1.8 harris41 140: * LON-CAPA Domain Name
141: * LON-CAPA Machine ID Name, and
1.47 albertel 142: * Server Administration E-mail Address.
1.32 raeburn 143: ===============================================================================
144:
145: In addition, a Support E-mail Address can also be included. If
146: an address is included then one of the options in the LON-CAPA
147: help menu will be a link to a form that a user will complete to
148: request LON-CAPA help.
149:
1.1 harris41 150: END
1.3 harris41 151:
1.4 harris41 152: open(OUT,'>/tmp/loncapa_updatequery.out');
153: close(OUT);
154:
1.3 harris41 155: # query for Machine Role
156: print(<<END);
157: **** Machine Role ****
158: Library server (recommended if first-time installation of LON-CAPA):
159: Servers that are repositories of authoritative educational resources.
160: These servers also provide the construction space by which instructors
161: assemble their classroom online material.
162: Access server:
163: Servers that load-balance high-traffic delivery of educational resources
164: over the world-wide web.
1.4 harris41 165: 1) Will this be a library server? (recommended if this is your first install)
1.3 harris41 166: 2) Or, will this be an access server?
167: END
1.4 harris41 168: my $flag=0;
169: my $r='';
170: my $lonRole;
171: while (!$flag) {
172: print "ENTER A CHOICE OF 1 or 2:\n";
173: my $choice=<>;
174: chomp($choice);
175: if ($choice==1) {
176: open(OUT,'>>/tmp/loncapa_updatequery.out');
177: print(OUT 'lonRole'."\t".'library'."\n");
178: close(OUT);
179: $lonRole='library';
180: $r='l';
181: $flag=1;
182: }
183: elsif ($choice==2) {
184: open(OUT,'>>/tmp/loncapa_updatequery.out');
185: print(OUT 'lonRole'."\t".'access'."\n");
186: close(OUT);
187: $lonRole='access';
188: $r='a';
189: $flag=2;
190: }
191: else {
192:
193: }
194: }
1.3 harris41 195:
196: # need to recommend a machine ID name (ipdomain.l.somenumber)
1.36 albertel 197: my $hostname=`hostname -f`; chomp($hostname);
1.4 harris41 198: my $ipdomain='';
199: if ($hostname=~/([^\.]*)\.([^\.]*)$/) {
200: $ipdomain=$1;
201: }
1.1 harris41 202:
203: print(<<END);
204:
1.8 harris41 205: **** Domain ****
1.45 www 206: [This does NOT need to correspond to internet address domains.
207: Please make this name short AND descriptive of your organization.
208: Domain names are close to impossible to change later!!!
209: Good examples might be "msu" or "bionet" or "vermontcc".
210: Bad examples are "physics" (too general)
1.37 www 211: or "michiganstateuniversity" (too long)
212: or "msuedu" (internet domain, just make it "msu")
1.45 www 213: or "msuphysics" (only if there is a good reason to limit to department
214: - we don't know of one)
1.37 www 215: or "mydomain" (what is that?)
1.45 www 216: Avoid multiple domains at the same institution, even if it means that you
217: have to actually work together with your colleagues. You can still run
218: multiple library servers within the same domain.
219: If this domain is eventually going to be part of the main production
220: cluster, you MUST contact the LON-CAPA group at MSU (loncapa@loncapa.org)
221: to have a domain name assigned, and then use it exactly as given. This is
222: also true for test installs that might eventually turn into production setups.
223: Stop now if you didn't do so.]
1.1 harris41 224: END
1.8 harris41 225:
226: # get domain name
1.1 harris41 227: # accept if valid, if not valid, tell user and repeat
1.4 harris41 228: $flag=0;
1.8 harris41 229: my $lonDefDomain;
1.4 harris41 230: while (!$flag) {
231: if ($ipdomain) {
232: print(<<END);
1.8 harris41 233: ENTER LONCAPA DOMAIN [$ipdomain]:
1.4 harris41 234: END
235: }
236: else {
237: print(<<END);
1.8 harris41 238: ENTER LONCAPA DOMAIN:
1.4 harris41 239: END
240: }
241: my $choice=<>;
242: chomp($choice);
1.18 harris41 243: my $bad_domain_flag=0;
1.41 albertel 244: my @bad_domain_names=('res','raw','userfiles','priv','adm','uploaded',
245: 'editupload');
1.18 harris41 246: foreach my $bad (@bad_domain_names) {
247: $bad_domain_flag=1 if $choice eq $bad;
248: }
1.37 www 249: if ($choice=~/capa/i) {
250: $bad_domain_flag=1;
251: }
1.8 harris41 252: if ($ipdomain and $choice=~/^\s*$/) {
253: $choice=$ipdomain;
1.4 harris41 254: open(OUT,'>>/tmp/loncapa_updatequery.out');
1.8 harris41 255: print(OUT 'lonDefDomain'."\t".$choice."\n");
1.4 harris41 256: close(OUT);
1.8 harris41 257: $lonDefDomain=$choice;
1.4 harris41 258: $flag=1;
1.51 albertel 259: } elsif (length($choice)>35) {
1.37 www 260: print "Name too long\n";
261: } elsif (length($choice)<2) {
262: print "Name too short\n";
1.38 www 263: } elsif ($bad_domain_flag) {
264: print "Invalid input ('$choice' conflicts with LON-CAPA namespace).\n";
265: print "Please try something different than '$choice'\n";
1.51 albertel 266: } elsif ($choice!~/\_/ and $choice=~/^[\w\-.]+$/) {
1.4 harris41 267: open(OUT,'>>/tmp/loncapa_updatequery.out');
1.8 harris41 268: print(OUT 'lonDefDomain'."\t".$choice."\n");
1.4 harris41 269: close(OUT);
1.8 harris41 270: $lonDefDomain=$choice;
271: $r='l';
1.4 harris41 272: $flag=1;
1.37 www 273: } else {
1.51 albertel 274: print "Invalid input (only alphanumeric characters, '-', and '.' supported).\n";
1.4 harris41 275: }
276: }
1.1 harris41 277:
1.20 albertel 278:
279: # get domain description
280: # accept if valid, if not valid, tell user and repeat
281: $flag=0;
282:
283: while (!$flag) {
284: print(<<END);
285:
286: **** Domain Description ****
287: String describing the domain, to be shown to users.
288: [Example, msu is Michigan State University]
289: ENTER DOMAIN DESCRIPTION:
290: END
291:
292: my $choice=<>;
293: chomp($choice);
294: if ($choice!~/:/) {
295: open(OUT,'>>/tmp/loncapa_updatequery.out');
296: print(OUT 'domainDescription'."\t".$choice."\n");
297: close(OUT);
298: $domainDescription=$choice;
299: $flag=1;
300: }
301: else {
302: print "Invalid input (no ':' allowed).\n";
303: }
304: }
305:
1.8 harris41 306: my $lonHostID;
307: if ($lonDefDomain) {
308: $lonHostID=$lonDefDomain.$r.int(1+rand(9)); # should be probably also detect
309: # against the hosts.tab
310: }
311:
1.1 harris41 312: print(<<END);
313:
1.8 harris41 314: **** Machine ID Name ****
1.45 www 315: [This does NOT need to correspond to internet address names;
1.8 harris41 316: this name MUST be unique to the whole LON-CAPA network;
1.45 www 317: we recommend that you use a name based off of your institution.
318: Good examples: "msul1" or "bioneta2".
319: Bad examples: "loncapabox" or "studentsinside".
1.37 www 320: Note that machine names are very hard to change later.]
1.1 harris41 321: END
1.8 harris41 322: # get machine name
1.1 harris41 323: # accept if valid, if not valid, tell user and repeat
1.4 harris41 324: $flag=0;
325: while (!$flag) {
326: if ($ipdomain) {
327: print(<<END);
1.8 harris41 328: ENTER LONCAPA MACHINE ID [$lonHostID]:
1.4 harris41 329: END
330: }
331: else {
332: print(<<END);
1.8 harris41 333: ENTER LONCAPA MACHINE ID:
1.4 harris41 334: END
335: }
336: my $choice=<>;
337: chomp($choice);
1.37 www 338: if ($choice=~/capa/i) {
339: print "Invalid input (names containing 'capa' are reserved).\n";
340: } elsif ($lonHostID and $choice=~/^\s*$/) {
1.8 harris41 341: $choice=$lonHostID;
1.4 harris41 342: open(OUT,'>>/tmp/loncapa_updatequery.out');
1.8 harris41 343: print(OUT 'lonHostID'."\t".$choice."\n");
1.4 harris41 344: close(OUT);
1.8 harris41 345: $lonHostID=$choice;
1.4 harris41 346: $flag=1;
1.51 albertel 347: } elsif (length($choice)>45) {
1.37 www 348: print "Name too long\n";
349: } elsif (length($choice)<4) {
350: print "Name too short\n";
1.51 albertel 351: } elsif ($choice!~/\_/ and $choice=~/^[\w\-.]+$/) {
1.4 harris41 352: open(OUT,'>>/tmp/loncapa_updatequery.out');
1.8 harris41 353: print(OUT 'lonHostID'."\t".$choice."\n");
1.4 harris41 354: close(OUT);
1.8 harris41 355: $lonHostID=$choice;
1.4 harris41 356: $flag=1;
1.37 www 357: } else {
1.51 albertel 358: print "Invalid input (only alphanumeric characters, '-', and '.' supported).\n";
1.4 harris41 359: }
360: }
1.1 harris41 361:
1.43 raeburn 362: # get primary library server in domain
363: if ($lonRole eq 'library') {
364: if (!grep/^\Q$lonHostID\E$/,@libservers) {
365: push(@libservers,$lonHostID);
366: }
367: if (@libservers == 1) {
368: $primaryLibServer = $libservers[0];
369: }
370: }
371: while (!$flag) {
372: print(<<END);
373: **** Domain's Primary Library Server ID ****
374: This should be the LON-CAPA machine ID of a library server in your
375: domain. If you only have a single library server in your domain, then
376: the Primary Library server ID will be the machine ID of that server.
377: This server will be where domain data which are not associated with any
378: specific home library server will be stored (e.g., e-mail broadcast by
379: administrators to users in the domain).
380: END
381: if (defined($primaryLibServer)) {
382: print(<<END);
383: ENTER DOMAIN'S PRIMARY LIBRARY SERVER ID [$primaryLibServer]:
384: END
385: } elsif (@libservers > 0) {
386: print(<<END);
387: ENTER DOMAIN'S PRIMARY LIBRARY SERVER ID [$libservers[0]]
388: END
389: } else {
390: print (<<END);
391: No library servers could be identified for this domain. If you have already installed LON-CAPA on a different server (designated as a library server) in this domain, please enter the LONCAPA MACHINE ID of that server. If not, you will need to install a LON-CAPA library server. Enter the MACHINE ID of the server you plan to designate as a library server.
392: END
393: }
394:
395: my $choice=<>;
396: chomp($choice);
397: if ($primaryLibServer and $choice=~/^\s*$/) {
398: $choice=$primaryLibServer;
399: open(OUT,'>>/tmp/loncapa_updatequery.out');
400: print(OUT 'primaryLibServer'."\t".$choice."\n");
401: close(OUT);
402: $flag=1;
1.51 albertel 403: } elsif (length($choice)>35) {
1.43 raeburn 404: print "Name too long\n";
405: } elsif (length($choice)<4) {
406: print "Name too short\n";
1.51 albertel 407: } elsif ($choice!~/\_/ and $choice=~/^[\w\-.]+$/) {
1.43 raeburn 408: open(OUT,'>>/tmp/loncapa_updatequery.out');
409: print(OUT 'primaryLibServer'."\t".$choice."\n");
410: close(OUT);
411: $primaryLibServer=$choice;
412: $flag=1;
413: } else {
1.51 albertel 414: print "Invalid input (only alphanumeric characters, '-', and '.' supported).\n";
1.43 raeburn 415: }
416: }
417:
418:
1.32 raeburn 419: # get admin e-mail address
1.4 harris41 420: # accept if valid, if not valid, tell user and repeat
421: $flag=0;
1.9 harris41 422: my $lonAdmEMail;
1.4 harris41 423: while (!$flag) {
1.1 harris41 424: print(<<END);
425:
1.55 albertel 426: **** Server Administrators E-mail ****
1.1 harris41 427: E-mail address of the person who will manage this machine
1.4 harris41 428: [should be in the form somebody\@somewhere]
1.32 raeburn 429: ENTER ADMIN E-MAIL ADDRESS:
1.1 harris41 430: END
431:
1.4 harris41 432: my $choice=<>;
433: chomp($choice);
434: if ($choice=~/\@/) {
435: open(OUT,'>>/tmp/loncapa_updatequery.out');
1.9 harris41 436: print(OUT 'lonAdmEMail'."\t".$choice."\n");
1.4 harris41 437: close(OUT);
1.9 harris41 438: $lonAdmEMail=$choice;
1.4 harris41 439: $flag=1;
440: }
441: else {
442: print "Invalid input (this needs to look like an e-mail address!).\n";
443: }
444: }
445:
1.32 raeburn 446:
447: # get support e-mail address
448: # accept if valid, if not valid, tell user and repeat
449: $flag=0;
450: my $lonSupportEMail;
451: while (!$flag) {
452: print(<<END);
453:
454: **** Support E-mail ****
455: E-mail address of the person who will receive
456: help requests from LON-CAPA users who access
457: the system via this server. If the address is left blank,
458: then a help support form will not be displayed
459: as part of the help menu.
460: [should be in the form somebody\@somewhere]
461: ENTER SUPPORT E-MAIL ADDRESS:
462: END
463:
464: my $choice=<>;
465: chomp($choice);
466: $choice =~ s/\s//g;
1.33 albertel 467: if ( ($choice=~/\@/) || $choice eq '') {
1.32 raeburn 468: open(OUT,'>>/tmp/loncapa_updatequery.out');
469: print(OUT 'lonSupportEMail'."\t".$choice."\n");
470: close(OUT);
471: $lonSupportEMail=$choice;
472: $flag=1;
473: }
474: else {
475: print "Invalid input (this either needs to be blank, or look like an e-mail address!).\n";
476: }
477: }
478:
1.60 raeburn 479: while (!$flag) {
480: print(<<END);
481:
482: **** Web Server Protocol ****
483: If you plan to run the Apache server with SSL enabled,
484: the protocol should be: https; otherwise it should be http.
485: ENTER WEB SERVER PROTOCOL:
486: END
487:
488: my $choice=<>;
489: chomp($choice);
1.65 raeburn 490: if ($choice =~ /^https?$/) {
1.60 raeburn 491: open(OUT,'>>/tmp/loncapa_updatequery.out');
492: print(OUT 'protocol'."\t".$choice."\n");
493: close(OUT);
494: $protocol=$choice;
495: $flag=1;
496: }
497: else {
498: print "Invalid input (only http or https allowed).\n";
499: }
500: }
1.32 raeburn 501:
1.65 raeburn 502: while (!$flag) {
503: print(<<END);
504:
505: **** Internet Domain Name of Your Institution ****
506:
507: The internet domain name used for servers at your institution
508: should be provided. This will be similar to: ustate.edu or
509: topcollege.ac.uk or my.hostingcompany.com, i.e., the part of
510: a server hostname which indicates to which organization the
511: server belongs.
512:
513: ENTER INTERNET DOMAIN NAME:
514: END
515:
516: my $choice=<>;
517: chomp($choice);
518: if ($choice =~/[^.]+\.[^.]+/) {
519: open(OUT,'>>/tmp/loncapa_updatequery.out');
520: print(OUT 'internet domain'."\t".$intdom."\n");
521: close(OUT);
522: $intdom=$choice;
523: $flag=1;
524: }
525: else {
526: print "Invalid input (must be at least two levels separated by . - e.g., ustate.edu).\n";
527: }
528: }
529:
530:
1.1 harris41 531: # update loncapa.conf
1.49 raeburn 532: my $confdir = '/etc/httpd/conf/';
1.64 raeburn 533: if ('<DIST />' eq 'sles10' || '<DIST />' eq 'sles11' || '<DIST />' eq 'suse10.1' || '<DIST />' eq 'suse10.2' || '<DIST />' eq 'suse10.3' || '<DIST />' eq 'suse11.1' || '<DIST />' eq 'suse11.2' || '<DIST />' eq 'debian5' || '<DIST />' eq 'ubuntu6' || '<DIST />' eq 'ubuntu8') {
1.49 raeburn 534: $confdir = '/etc/apache2/';
535: }
1.5 harris41 536: my $filename='loncapa.conf';
537: my %perlvar;
538: if (-e "$confdir$filename") {
539: open(CONFIG,'<'.$confdir.$filename) or die("Can't read $confdir$filename");
540: while (my $configline=<CONFIG>) {
541: if ($configline =~ /^[^\#]*PerlSetVar/) {
542: my ($unused,$varname,$varvalue)=split(/\s+/,$configline);
543: chomp($varvalue);
1.12 harris41 544: $perlvar{$varname}=$varvalue if $varvalue!~/^\{\[\[\[\[/;
1.5 harris41 545: }
546: }
547: close(CONFIG);
548: }
549: $perlvar{'lonHostID'}=$lonHostID;
550: $perlvar{'lonDefDomain'}=$lonDefDomain;
1.9 harris41 551: $perlvar{'lonAdmEMail'}=$lonAdmEMail;
1.32 raeburn 552: $perlvar{'lonSupportEMail'}=$lonSupportEMail;
1.5 harris41 553: $perlvar{'lonRole'}=$lonRole;
1.16 harris41 554: unless ($perlvar{'lonLoadLim'} and $perlvar{'lonLoadLim'}!~/\{\[\[\[\[/) {
1.5 harris41 555: $perlvar{'lonLoadLim'}='2.00';
556: }
1.25 albertel 557: unless ($perlvar{'lonUserLoadLim'} and $perlvar{'lonUserLoadLim'}!~/\{\[\[\[\[/) {
558: $perlvar{'lonUserLoadLim'}='0';
559: }
1.16 harris41 560: unless ($perlvar{'lonExpire'} and $perlvar{'lonExpire'}!~/\{\[\[\[\[/) {
1.5 harris41 561: $perlvar{'lonExpire'}='86400';
562: }
1.16 harris41 563: unless ($perlvar{'lonReceipt'} and $perlvar{'lonReceipt'}!~/\{\[\[\[\[/) {
1.5 harris41 564: my $lonReceipt='';
1.11 harris41 565: srand(time ^ $$ ^ unpack "%L*", `ps axww | gzip`);
1.5 harris41 566: my @alnum=(0..9,a..z);
567: foreach my $i (1..20) {
568: $lonReceipt.=$alnum[int(rand(36))];
569: }
570: $perlvar{'lonReceipt'}=$lonReceipt;
571: }
572: open(OUT,">$confdir$filename") or
573: die("Cannot output to $confdir$filename\n");
574: foreach my $key (keys %perlvar) {
575: my $value=$perlvar{$key};
1.49 raeburn 576: my $line = "PerlSetVar $key $value";
577: if ($value eq '') {
578: $line = '#'.$line;
579: }
1.5 harris41 580: print(OUT <<END);
1.49 raeburn 581: $line
1.5 harris41 582: END
583: }
584: close(OUT);
1.1 harris41 585: }
586: </perlscript>
587: </file>
588: <file>
1.49 raeburn 589: <target dist='default'>/etc/httpd/conf/</target>
1.64 raeburn 590: <target dist='sles10 sles11 suse10.1 suse10.2 suse10.3 suse11.1 suse11.2 debian5 ubuntu6 ubuntu8'>/etc/apache2/</target>
1.1 harris41 591: <perlscript mode='fg'>
1.31 albertel 592: sub securesetting {
593: my (%perlvar)=@_;
594: my $securestatus='unknown';
595: my $securenum='';
596: if ( $perlvar{'loncAllowInsecure'}&& $perlvar{'londAllowInsecure'}) {
597: $securestatus='no'; $securenum='4';
598: } elsif ( $perlvar{'loncAllowInsecure'}&& !$perlvar{'londAllowInsecure'}) {
599: $securestatus='lond'; $securenum='3';
600: } elsif (!$perlvar{'loncAllowInsecure'}&& $perlvar{'londAllowInsecure'}) {
601: $securestatus='lonc'; $securenum='2';
602: } elsif (!$perlvar{'loncAllowInsecure'}&& !$perlvar{'londAllowInsecure'}) {
603: $securestatus='yes (lond and lonc)'; $securenum='1';
604: }
605: return ($securestatus,$securenum);
606: }
1.1 harris41 607: # read values from loncapa.conf
1.49 raeburn 608: my $confdir = "<TARGET />";
1.5 harris41 609: my $filename='loncapa.conf';
610: my %perlvar;
1.31 albertel 611: my ($securestatus,$securenum);
1.5 harris41 612: if (-e "$confdir$filename") {
613: open(CONFIG,'<'.$confdir.$filename) or
614: die("Can't read $confdir$filename");
615: while (my $configline=<CONFIG>) {
616: if ($configline =~ /^[^\#]*PerlSetVar/) {
617: my ($unused,$varname,$varvalue)=split(/\s+/,$configline);
618: chomp($varvalue);
619: $perlvar{$varname}=$varvalue;
620: }
621: }
622: close(CONFIG);
623: }
1.16 harris41 624: unless ($perlvar{'lonLoadLim'} and $perlvar{'lonLoadLim'}!~/\{\[\[\[\[/) {
625: $perlvar{'lonLoadLim'}='2.00';
626: }
1.25 albertel 627: unless ($perlvar{'lonUserLoadLim'} and $perlvar{'lonUserLoadLim'}!~/\{\[\[\[\[/) {
628: $perlvar{'lonUserLoadLim'}='0';
629: }
1.16 harris41 630: unless ($perlvar{'lonExpire'} and $perlvar{'lonExpire'}!~/\{\[\[\[\[/) {
631: $perlvar{'lonExpire'}='86400';
632: }
1.31 albertel 633: unless ($perlvar{'londAllowInsecure'} and $perlvar{'londAllowInsecure'}!~/\{\[\[\[\[/) {
634: $perlvar{'londAllowInsecure'}='1';
635: }
636: unless ($perlvar{'loncAllowInsecure'} and $perlvar{'loncAllowInsecure'}!~/\{\[\[\[\[/) {
637: $perlvar{'loncAllowInsecure'}='1';
638: }
639: ($securestatus,$securenum)=&securesetting(%perlvar);
1.16 harris41 640: unless ($perlvar{'lonReceipt'} and $perlvar{'lonReceipt'}!~/\{\[\[\[\[/) {
641: my $lonReceipt='';
642: srand(time ^ $$ ^ unpack "%L*", `ps axww | gzip`);
643: my @alnum=(0..9,a..z);
644: foreach my $i (1..20) {
645: $lonReceipt.=$alnum[int(rand(36))];
646: }
647: $perlvar{'lonReceipt'}=$lonReceipt;
648: }
1.7 harris41 649: my %perlvarstatic;
650: if (-e "${confdir}loncapa_apache.conf") {
651: open(CONFIG,'<'.$confdir.'loncapa_apache.conf') or
652: die("Can't read ${confdir}loncapa_apache.conf");
653: while (my $configline=<CONFIG>) {
654: if ($configline =~ /^[^\#]*PerlSetVar/) {
655: my ($unused,$varname,$varvalue)=split(/\s+/,$configline);
656: chomp($varvalue);
657: $perlvarstatic{$varname}=$varvalue;
658: }
659: }
660: close(CONFIG);
661: }
1.55 albertel 662:
663: my (@hosts_files, @domain_files);
664: if ( $lonCluster ne 'existing') {
665: push(@domain_files,'../'.$lonCluster.'_domain.tab',
666: '../'.$lonCluster.'_dns_domain.tab');
667: push(@hosts_files,'../'.$lonCluster.'_hosts.tab',
668: '../'.$lonCluster.'_dns_hosts.tab');
669: }
670: push(@domain_files,'/home/httpd/lonTabs/domain.tab',
671: '/home/httpd/lonTabs/dns_domain.tab');
672: push(@hosts_files,'/home/httpd/lonTabs/hosts.tab',
673: '/home/httpd/lonTabs/dns_hosts.tab');
674:
1.23 albertel 675: if (!$domainDescription) {
1.55 albertel 676: foreach my $file (@domain_files) {
677: open(IN,'<'.$file);
678: while(my $line = <IN>) {
679: if ($line =~ /^\Q$perlvar{'lonDefDomain'}\E\:/) {
680: (undef,$domainDescription,$domainTabExtras)=split(/:/,$line,3);
681: chomp($domainDescription);
682: chomp($domainTabExtras);
1.60 raeburn 683: # the remaining field (primary lib server) is handled later
1.55 albertel 684: $domainTabExtras = join(':',(split(/:/,$domainTabExtras))[0..5]);
685: last;
686: }
687: }
688: close(IN);
689: last if ($domainDescription);
690: }
1.23 albertel 691: }
1.55 albertel 692:
1.60 raeburn 693: if (!$protocol) {
694: foreach my $file (@hosts_files) {
695: open(IN,'<'.$file);
696: while(my $line = <IN>) {
1.66 ! raeburn 697: if ($line =~ /^\Q$perlvar{'lonHostID'}\E:\Q$perlvar{'lonDefDomain'}\E\:(?:access|library)\:[^:]+\:(https?)/) {
1.60 raeburn 698: $protocol = $1;
1.66 ! raeburn 699: chomp($protocol);
1.60 raeburn 700: last;
701: }
702: }
703: }
704: }
705:
706: if (!$protocol) {
707: $protocol = 'http';
708: }
709:
1.65 raeburn 710: if (!$intdom) {
711: foreach my $file (@hosts_files) {
712: open(IN,'<'.$file);
713: while(my $line = <IN>) {
1.66 ! raeburn 714: if ($line =~ /^\Q$perlvar{'lonHostID'}\E:\Q$perlvar{'lonDefDomain'}\E\:(?:access|library)\:[^:]+\:https?\:([^:]+)/) {
1.65 raeburn 715: $intdom = $1;
1.66 ! raeburn 716: chomp($intdom);
1.65 raeburn 717: last;
718: }
719: }
720: }
721: }
722:
1.55 albertel 723: while(!$primaryLibServ && (@hosts_file || @domain_files)) {
724: my $file = shift(@domain_files);
725: open(IN,'<'.$file);
726: while(my $line = <IN>) {
727: if ($line =~ /^\Q$perlvar{'lonDefDomain'}\E\:/) {
728: $primaryLibServer=(split(/:/,$line))[8];
1.43 raeburn 729: chomp($primaryLibServer);
730: }
731: }
732: close(IN);
1.55 albertel 733: last if ($primaryLibServer);
734: $file = shift(@hosts_files);
735: open(IN,'<'.$file);
736: while(my $line = <IN>) {
737: if ($line =~ /^([^\:]+)\:\Q$perlvar{'lonDefDomain'}\E\:library\:/) {
738: push(@libservers,$1);
739: }
740: }
1.58 albertel 741: # make list unique
742: @libservers = keys(%{{ map { $_ => 1 } (@libservers) }});
1.55 albertel 743: close(IN);
744: if (@libservers == 1) {
745: $primaryLibServer = $libservers[0];
746: }
1.43 raeburn 747: }
1.23 albertel 748:
1.6 harris41 749: # implement editing logic below, interactively
1.65 raeburn 750: # update loncapa.conf until 14 is entered
1.6 harris41 751:
752: $flag=0;
1.17 harris41 753:
1.6 harris41 754: while (!$flag) {
1.1 harris41 755: print(<<END);
756:
757: ===============================================================================
758: This is now the current configuration of your machine.
1.31 albertel 759: 1) Domain Name: $perlvar{'lonDefDomain'}
760: 2) Domain Description: $domainDescription
761: 3) Machine Name: $perlvar{'lonHostID'}
1.43 raeburn 762: 4) ID of primary library server for domain: $primaryLibServer
1.47 albertel 763: 5) Server Administrator's E-mail Address: $perlvar{'lonAdmEMail'}
1.43 raeburn 764: 6) Support E-mail Address: $perlvar{'lonSupportEMail'}
1.60 raeburn 765: 7) Web Server Protocol (http or https): $protocol
1.65 raeburn 766: 8) Internet Domain Name: $intdom
767: 9) Role: $perlvar{'lonRole'}
768: 10) Cache Expiration Time: $perlvar{'lonExpire'}
769: 11) Server Load: $perlvar{'lonLoadLim'}
770: 12) User Load: $perlvar{'lonUserLoadLim'}
771: 13) Allow only secure connections: $securestatus
772: 14) Everything is correct up above
1.6 harris41 773: END
1.38 www 774:
1.54 albertel 775: my @error;
1.38 www 776: foreach my $v ($perlvar{'lonDefDomain'},$perlvar{'lonHostID'}) {
1.51 albertel 777: if (length($v)>35) { $error.="\nName $v too long"; }
1.38 www 778: if (length($v)<2) { $error.="\nName $v too short"; }
1.39 albertel 779: if ($v=~/capa/i) {
780: if ($v!~/^oucapa\d+$/ &&
781: ($v!~/^capa\d+$/ && $perlvar{'lonDefDomain'} eq 'uwsp')) {
1.54 albertel 782: push(@error,"Name $v contains 'capa'");
1.39 albertel 783: }
784: }
1.41 albertel 785: foreach my $bad ('res','raw','userfiles','priv','adm','uploaded',
786: 'editupload') {
1.54 albertel 787: push(@error,"\nName $v reserved.") if $v eq $bad;
1.38 www 788: }
1.54 albertel 789: if ($v=~/[^\w\-.]/) { push(@error,"Name $v contains special characters"); }
1.38 www 790: }
1.53 albertel 791: if ($domainDescription =~ /^\s*$/) {
1.54 albertel 792: push(@error,"Domain Description is blank.");
1.53 albertel 793: } elsif ($domainDescription!~/^[\(\)\-\w\s,]+$/) {
1.54 albertel 794: push(@error,"Domain Description contains special characters.");
1.38 www 795: }
796: foreach my $v ($perlvar{'lonExpire'},$perlvar{'lonLoadLim'}) {
1.54 albertel 797: unless ($v=~/^[\d+\.]+$/) { push(@error,"Number expected instead of $v"); }
1.38 www 798: }
799: unless (($perlvar{'lonRole'} eq 'library') || ($perlvar{'lonRole'} eq 'access')) {
1.54 albertel 800: push(@error,"Invalid Role");
1.17 harris41 801: }
1.43 raeburn 802:
1.60 raeburn 803: unless (($protocol eq 'http') || ($protocol eq 'https')) {
804: push(@error,"Invalid Protocol (must be http or https");
805: }
806:
1.65 raeburn 807: if (!defined($intdom)) {
808: push(@error,"No internet domain name designated. Enter something like ustate.edu");
809: } elsif ($intdom !~ /^[^.]+\.\w{2,6}$/) {
810: push(@error,"Invalid Internet domain name (must be at least two levels separated by . - e.g., ustate.edu");
811: }
812:
1.43 raeburn 813: if (!defined($primaryLibServer)) {
814: if (@libservers > 0) {
1.54 albertel 815: push(@error,"No primary library server ID designated. Choose from: ".join(',',sort(@libservers)));
1.43 raeburn 816: } else {
1.54 albertel 817: push(@error,"No library servers in this domain (including current server)");
1.43 raeburn 818: }
819: } else {
1.54 albertel 820: if (length($primaryLibServer)>35) { push(@error,"Primary Library Server ID: $primaryLibServer too long"); }
821: if (length($primaryLibServer)<2) { push(@error,"Primary Library Server ID: $primaryLibServer too short"); }
1.43 raeburn 822: if ($primaryLibServer =~/capa/i) {
823: if ($primaryLibServer!~/^oucapa\d+$/ &&
824: ($primaryLibServer!~/^capa\d+$/ && $perlvar{'lonDefDomain'} eq 'uwsp')) {
1.54 albertel 825: push(@error,"Primary library server ID $primaryLibServer contains 'capa'")
1.43 raeburn 826: }
827: }
828: foreach my $bad ('res','raw','userfiles','priv','adm','uploaded',
829: 'editupload') {
1.54 albertel 830: push(@error,"Primary library server ID $primaryLibServer reserved.") if $primaryLibServer eq $bad;
1.43 raeburn 831: }
1.54 albertel 832: if ($primaryLibServer=~/[^\w\-.]/) { push(@error,"Primary library server ID $primaryLibServer contains special characters"); }
1.43 raeburn 833: }
834:
835:
1.54 albertel 836: if (@error) { print "\n*** ERRORS: \n\t".join("\n\t",@error)."\n"; }
1.6 harris41 837: print(<<END);
1.65 raeburn 838: ENTER A CHOICE OF 1-13 TO CHANGE, otherwise ENTER 14:
1.1 harris41 839: END
1.5 harris41 840: my $choice=<>;
841: chomp($choice);
1.6 harris41 842: if ($choice==1) {
843: print(<<END);
1.16 harris41 844: 1) Domain Name: $perlvar{'lonDefDomain'}
1.20 albertel 845: ENTER NEW VALUE (this is an internal value used to identify a group of
846: LON-CAPA machines, it must be alphanumerical, we suggest
847: using a part of your actual DNS domain. For example, for
848: the machine loncapa.msu.edu, we set the Domain to msu):
1.6 harris41 849: END
850: my $choice2=<>;
851: chomp($choice2);
1.8 harris41 852: $perlvar{'lonDefDomain'}=$choice2;
1.6 harris41 853: }
854: elsif ($choice==2) {
855: print(<<END);
1.20 albertel 856: 2) Domain Description: $domainDescription
857: ENTER NEW VALUE (this should be a string that describes your domain, spaces
858: and punctuation are fine except for ':'):
859: END
860: my $choice2=<>;
861: chomp($choice2);
862: $domainDescription=$choice2;
863: }
864: elsif ($choice==3) {
865: print(<<END);
866: 3) Machine Name: $perlvar{'lonHostID'}
867: ENTER NEW VALUE (this will be the name of the machine in the LON-CAPA network
868: it cannot contain any of '_' '-' '.' or ':'. We suggest that
869: if you are in the domain 'example' and are the first library
870: server you enter 'examplel1') :
1.6 harris41 871: END
872: my $choice2=<>;
873: chomp($choice2);
1.8 harris41 874: $perlvar{'lonHostID'}=$choice2;
1.6 harris41 875: }
1.20 albertel 876: elsif ($choice==4) {
1.6 harris41 877: print(<<END);
1.43 raeburn 878: 4) ID of primary library server for domain: $primaryLibServer
879: ENTER NEW VALUE (this will be the LON-CAPA Machine ID of a library server in
880: your domain; it cannot contain any of '_' '-' '.' or ':'.
881: This server will be where domain data which are not
882: associated with any specific home library server
883: will be stored (e.g., e-mail broadcast by Domain Coordinators
884: to users in the domain).
885: END
886: my $choice2=<>;
887: chomp($choice2);
888: $primaryLibServer=$choice2;
889: }
890: elsif ($choice==5) {
891: print(<<END);
1.47 albertel 892: 5) Server Administrator's E-mail Address: $perlvar{'lonAdmEMail'}
1.6 harris41 893: ENTER NEW VALUE:
894: END
895: my $choice2=<>;
896: chomp($choice2);
1.9 harris41 897: $perlvar{'lonAdmEMail'}=$choice2;
1.6 harris41 898: }
1.43 raeburn 899: elsif ($choice==6) {
1.6 harris41 900: print(<<END);
1.43 raeburn 901: 6) Support E-mail Address: $perlvar{'lonSupportEMail'}
1.32 raeburn 902: ENTER NEW VALUE:
903: END
904: my $choice2=<>;
905: chomp($choice2);
906: $perlvar{'lonSupportEMail'}=$choice2;
907: }
1.43 raeburn 908: elsif ($choice==7) {
1.32 raeburn 909: print(<<END);
1.60 raeburn 910: 7) Server Protocol (http or https):
911: ENTER NEW VALUE: (this should be either 'http' or 'https'
912: if in doubt set to 'http'):
913: END
914: my $choice2=<>;
915: chomp($choice2);
916: $protocol=$choice2;
917: }
918: elsif ($choice==8) {
919: print(<<END);
1.65 raeburn 920: 8) Internet Domain Name of Institution
921: ENTER NEW VALUE:
922:
923: END
924: my $choice2=<>;
925: chomp($choice2);
926: $intdom=$choice2;
927: }
928: elsif ($choice==9) {
929: print(<<END);
930: 9) Role: $perlvar{'lonRole'}
1.20 albertel 931: ENTER NEW VALUE (this should be either 'access' or 'library'
932: if in doubt select 'library'):
1.6 harris41 933: END
934: my $choice2=<>;
935: chomp($choice2);
936: $perlvar{'lonRole'}=$choice2;
937: }
1.65 raeburn 938: elsif ($choice==10) {
1.6 harris41 939: print(<<END);
1.65 raeburn 940: 10) Cache Expiration Time: $perlvar{'lonExpire'}
1.20 albertel 941: ENTER NEW VALUE (in seconds, 86400 is a reasonable value):
1.6 harris41 942: END
943: my $choice2=<>;
944: chomp($choice2);
945: $perlvar{'lonExpire'}=$choice2;
946: }
1.65 raeburn 947: elsif ($choice==11) {
1.6 harris41 948: print(<<END);
1.65 raeburn 949: 11) Server Load: $perlvar{'lonLoadLim'}
1.6 harris41 950: ENTER NEW VALUE:
951: END
952: my $choice2=<>;
953: chomp($choice2);
954: $perlvar{'lonLoadLim'}=$choice2;
955: }
1.65 raeburn 956: elsif ($choice==12) {
1.25 albertel 957: print(<<END);
1.65 raeburn 958: 12) User Load: $perlvar{'lonUserLoadLim'}
1.25 albertel 959: Numer of users that can login before machine is 'overloaded'
1.26 albertel 960: ENTER NEW VALUE (integer value, 0 means there is no limit):
1.25 albertel 961: END
962: my $choice2=<>;
963: chomp($choice2);
964: $perlvar{'lonUserLoadLim'}=$choice2;
965: }
1.65 raeburn 966: elsif ($choice==13) {
1.31 albertel 967: print(<<END);
1.65 raeburn 968: 13) Allow only secure connections: $securestatus
1.31 albertel 969: The Lon-CAPA communication daemons lonc and lond can be configured to
970: allow only secure connections by default.
971:
972: POSSIBLE CHOICES:
973: 1) allow only secure connections and don't connect to machines that
974: can not be connected to securely
975: 2) allow only secure connections but allow this machine to connect to
976: machines that don't support secure connections
977: 3) allow insecure connections to this machine but only allow connections
978: to machines that support secure connections
979: 4) allow insecure connections
980: ENTER NEW VALUE (currenly $securenum):
981: END
982: my $choice2=<>;
983: chomp($choice2);
984: if ($choice2 eq '1') {
985: $perlvar{'loncAllowInsecure'}=0;$perlvar{'londAllowInsecure'}=0;
986: } elsif ($choice2 eq '2') {
987: $perlvar{'loncAllowInsecure'}=0;$perlvar{'londAllowInsecure'}=1;
988: } elsif ($choice2 eq '3') {
989: $perlvar{'loncAllowInsecure'}=1;$perlvar{'londAllowInsecure'}=0;
990: } elsif ($choice2 eq '4') {
991: $perlvar{'loncAllowInsecure'}=1;$perlvar{'londAllowInsecure'}=1;
992: }
993: ($securestatus,$securenum)=&securesetting(%perlvar);
994: }
1.65 raeburn 995: elsif (($choice==14) && (!$error)) {
1.6 harris41 996: $flag=1;
997: }
998: else {
1.38 www 999: print "Invalid input.\n";
1.6 harris41 1000: }
1001: }
1.7 harris41 1002: open(OUT,">$confdir$filename") or
1003: die("Cannot output to $confdir$filename\n");
1004: foreach my $key (keys %perlvar) {
1005: my $value=$perlvar{$key};
1.49 raeburn 1006: my $line = "PerlSetVar $key $value";
1007: if ($value eq '') {
1008: $line = '#'.$line;
1009: }
1.8 harris41 1010: print(OUT <<END) unless $perlvarstatic{$key};
1.49 raeburn 1011: $line
1.7 harris41 1012: END
1013: }
1014: close(OUT);
1.1 harris41 1015: </perlscript>
1016: </file>
1017: <file>
1018: <target dist='default'>loncom/hosts.tab</target>
1019: <perlscript mode='fg'>
1020: unless (-l "<TARGET />") {
1.36 albertel 1021: my $hostname=`hostname -f`;chomp($hostname);
1.15 harris41 1022: $date=`date -I`; chomp($date);
1023: $lonHostID=$perlvar{'lonHostID'};
1.51 albertel 1024: $lonHostID=~s/[^\w\-.]//g;
1.15 harris41 1025: $lineexistflag=0;
1026: $hostidexistflag=0;
1.22 albertel 1027: $line2insert=<<END;
1.65 raeburn 1028: $perlvar{'lonHostID'}:$perlvar{'lonDefDomain'}:$perlvar{'lonRole'}:$hostname:$protocol:$intdom
1.15 harris41 1029: END
1.57 albertel 1030: if (!$domainTabExtras) {
1031: $domainTabExtras=':::::';
1032: }
1.43 raeburn 1033: $domaininsert="$perlvar{'lonDefDomain'}:$domainDescription:$domainTabExtras:$primaryLibServer\n";
1.23 albertel 1034: if ($lonCluster eq 'standalone') {
1035: open(OUT,'>../'.$lonCluster.'_hosts.tab') or
1036: die('file generation error');
1037: print(OUT $line2insert);
1.60 raeburn 1038: print OUT ("^$hostname:$protocol\n");
1.52 albertel 1039: close(OUT);
1040: open(OUT,'>../'.$lonCluster.'_dns_hosts.tab') or
1041: die('file generation error');
1042: print(OUT $line2insert);
1.23 albertel 1043: close(OUT);
1.27 albertel 1044: open(OUT,'>../'.$lonCluster.'_domain.tab') or
1045: die('file generation error');
1046: print(OUT $domaininsert);
1047: close(OUT);
1.52 albertel 1048: open(OUT,'>../'.$lonCluster.'_dns_domain.tab') or
1049: die('file generation error');
1050: print(OUT $domaininsert);
1051: close(OUT);
1.23 albertel 1052: }
1.15 harris41 1053: if ($flag==1) {
1.6 harris41 1054: `rm -f ../hosts.tab`;
1.52 albertel 1055: `rm -f ../dns_hosts.tab`;
1056: `ln -s ${lonCluster}_dns_hosts.tab ../dns_hosts.tab`;
1057: open(IN,'<../'.$lonCluster.'_dns_hosts.tab');
1058: while(my $line = <IN>) {
1059: if ($line =~ /^\Q$line2insert\E$/) {
1.13 harris41 1060: $lineexistflag=1;
1061: }
1.52 albertel 1062: if ($line =~ /^\Q$lonHostID\E\:/) {
1.13 harris41 1063: $hostidexistflag=1;
1064: }
1065: }
1066: close(IN);
1067: if ($hostidexistflag and !$lineexistflag) {
1068: print <<END;
1069: WARNING: $lonHostID already exists inside
1.52 albertel 1070: loncapa/loncom/${lonCluster}_dns_hosts.tab. The entry inside
1071: ${lonCluster}_dns_hosts.tab does not match your settings.
1072: An entry inside ${lonCluster}_hosts.tab will be made
1.13 harris41 1073: with your new values.
1074: END
1.15 harris41 1075: `grep -v "$lonHostID:" ../${lonCluster}_hosts.tab > ../new_${lonCluster}_hosts.tab`;
1076: open(OUT,'>>../new_'.$lonCluster.'_hosts.tab') or
1077: die("cannot open loncom/${lonCluster}_hosts.tab for output\n");
1.14 harris41 1078: print(OUT $line2insert);
1.13 harris41 1079: close(OUT);
1.15 harris41 1080: `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;
1.13 harris41 1081: # email appropriate message
1.65 raeburn 1082: `echo "REPLACE:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "REPLACE:$lonCluster:$lonHostID:$protocol:$intdom:$date" installrecord\@mail.lon-capa.org`;
1.13 harris41 1083: }
1084: elsif ($hostidexistflag and $lineexistflag) {
1.15 harris41 1085: print <<END;
1.52 albertel 1086: Entry exists in ${lonCluster}_dns_hosts.tab. Making duplicate entry in ${lonCluster}_hosts.tab
1.15 harris41 1087: END
1.52 albertel 1088: `grep -v "$lonHostID:" ../${lonCluster}_hosts.tab > ../new_${lonCluster}_hosts.tab`;
1089: open(OUT,'>>../new_'.$lonCluster.'_hosts.tab') or
1090: die("cannot open loncom/${lonCluster}_hosts.tab for output\n");
1091: print(OUT $line2insert);
1092: close(OUT);
1093: `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;
1.15 harris41 1094: # email appropriate message
1.65 raeburn 1095: `echo "STABLEUPDATE:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "STABLEUPDATE:$lonCluster:$lonHostID:$protocol:$intdom:$date" installrecord\@mail.lon-capa.org`;
1.13 harris41 1096: }
1.15 harris41 1097: elsif (!$hostidexistflag and !$lineexistflag) {
1098: print <<END;
1099: New entry for $lonCluster.
1.6 harris41 1100: END
1.15 harris41 1101: `cat ../${lonCluster}_hosts.tab > ../new_${lonCluster}_hosts.tab`;
1.21 albertel 1102: open(OUT,'>>../new_'.$lonCluster.'_hosts.tab') or
1103: die("cannot open loncom/new_${lonCluster}_hosts.tab for output\n");
1.15 harris41 1104: print(OUT $line2insert);
1105: close(OUT);
1106: `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;
1107: # email appropriate message
1.65 raeburn 1108: `echo "INSERT:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "INSERT:$lonCluster:$lonHostID:$protocol:$intdom:$date" installrecord\@mail.lon-capa.org`;
1.27 albertel 1109: }
1110: }
1111: $lineexistflag=0;
1112: if ($flag==1) {
1113: `rm -f ../domain.tab`;
1.52 albertel 1114: `rm -f ../dns_domain.tab`;
1115: `ln -s ${lonCluster}_dns_domain.tab ../dns_domain.tab`;
1116: open(IN,'<../'.$lonCluster.'_dns_domain.tab');
1117: while(my $line = <IN>) {
1118: if ($line =~/^\Q$domaininsert\E$/) {
1.27 albertel 1119: $lineexistflag=1;
1120: }
1.52 albertel 1121: if ($line =~/^\Q$perlvar{'lonDefDomain'}\E\:/) {
1.27 albertel 1122: $domainexistflag=1;
1123: }
1124: }
1125: close(IN);
1126: if ($domainexistflag and !$lineexistflag) {
1127: print <<END;
1128: WARNING: $perlvar{'lonDefDomain'} already exists inside
1.52 albertel 1129: loncapa/loncom/${lonCluster}_dns_domain.tab. The entry inside
1130: ${lonCluster}_dns_domain.tab does not match your settings.
1131: An entry will be made in inside ${lonCluster}_domain.tab
1.27 albertel 1132: with your new values.
1133: END
1134: `grep -v "$perlvar{'lonDefDomain'}:" ../${lonCluster}_domain.tab > ../new_${lonCluster}_domain.tab`;
1135: open(OUT,'>>../new_'.$lonCluster.'_domain.tab') or
1136: die("cannot open loncom/${lonCluster}_domain.tab for output\n");
1137: print(OUT $domaininsert);
1138: close(OUT);
1139: `ln -s new_${lonCluster}_domain.tab ../domain.tab`;
1140: # email appropriate message
1.34 albertel 1141: `echo "REPLACEdom:$lonCluster:$lonHostID:$date:$domaninsert" | mail -s "REPLACEdom:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
1.27 albertel 1142: }
1143: elsif ($domainexistflag and $lineexistflag) {
1.52 albertel 1144: `grep -v "$perlvar{'lonDefDomain'}:" ../${lonCluster}_domain.tab > ../new_${lonCluster}_domain.tab`;
1145: open(OUT,'>>../new_'.$lonCluster.'_domain.tab') or
1146: die("cannot open loncom/${lonCluster}_domain.tab for output\n");
1147: print(OUT $domaininsert);
1148: close(OUT);
1.27 albertel 1149: print <<END;
1.52 albertel 1150: Entry exists in ${lonCluster}_dns_domain.tab. Making duplicate entry in ${lonCluster}_domain.tab
1.27 albertel 1151: END
1.52 albertel 1152: `ln -s new_${lonCluster}_domain.tab ../domain.tab`;
1.27 albertel 1153: # email appropriate message
1154: `echo "STABLEUPDATEdom:$lonCluster:$lonHostID:$date:$domaininsert" | mail -s "STABLEUPDATEdom:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
1155: }
1156: elsif (!$domainexistflag and !$lineexistflag) {
1157: print <<END;
1158: New entry for $lonCluster.
1159: END
1160: `cat ../${lonCluster}_domain.tab > ../new_${lonCluster}_domain.tab`;
1161: open(OUT,'>>../new_'.$lonCluster.'_domain.tab') or
1162: die("cannot open loncom/new_${lonCluster}_domain.tab for output\n");
1163: print(OUT $domaininsert);
1164: close(OUT);
1165: `ln -s new_${lonCluster}_domain.tab ../domain.tab`;
1166: # email appropriate message
1167: `echo "INSERTdom:$lonCluster:$lonHostID:$date:$domaininsert" | mail -s "INSERTdom:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
1.6 harris41 1168: }
1169: }
1.1 harris41 1170: }
1171: </perlscript>
1172: </file>
1173: </files>
1174: </piml>
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/back.gif){kind=icon}
Return to updatequery.piml CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [LON-CAPA] / doc / loncapafiles