Annotation of doc/loncapafiles/updatequery.piml, revision 1.73
1.2 harris41 1: <!-- updatequery.piml -->
1.1 harris41 2:
1.73 ! raeburn 3: <!-- $Id: updatequery.piml,v 1.72 2011/11/06 00:41:53 raeburn Exp $ -->
1.1 harris41 4:
5: <!--
6:
7: This file is part of the LearningOnline Network with CAPA (LON-CAPA).
8:
9: LON-CAPA is free software; you can redistribute it and/or modify
10: it under the terms of the GNU General Public License as published by
11: the Free Software Foundation; either version 2 of the License, or
12: (at your option) any later version.
13:
14: LON-CAPA is distributed in the hope that it will be useful,
15: but WITHOUT ANY WARRANTY; without even the implied warranty of
16: MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17: GNU General Public License for more details.
18:
19: You should have received a copy of the GNU General Public License
20: along with LON-CAPA; if not, write to the Free Software
21: Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22:
23: /home/httpd/html/adm/gpl.txt
24:
25: http://www.lon-capa.org/
26:
27: -->
28:
29: <piml>
30: <targetroot>/</targetroot>
31: <files>
32: <file>
1.4 harris41 33: <target dist='default'>/</target>
1.1 harris41 34: <perlscript mode='fg'>
1.4 harris41 35: $|=1;
1.1 harris41 36: print(<<END);
37:
38:
39: *********************************************
40: *********************************************
41: **** ****
42: **** LON-CAPA SYSTEM INFORMATION REQUEST ****
43: **** ****
44: **** Please respond to the choices below ****
45: **** ****
46: *********************************************
47: *********************************************
48:
49: END
1.54 albertel 50: #sleep(3);
1.1 harris41 51: </perlscript>
52: </file>
53: <file>
1.22 albertel 54: <target dist='default'>loncom/hosts.tab</target>
55: <perlscript mode='fg'>
56: unless (-l "<TARGET />") {
57: print(<<END);
58:
59: ===============================================================================
1.30 www 60: Which cluster option would you like to have installed?
61: IMPORTANT: to take advantage of the cluster options 1) and 3),
62: you must contact lon-capa\@lon-capa.org.
63:
64: 1) PRODUCTION - you want to eventually connect this machine to the
65: LON-CAPA content sharing network. This setting is for
66: schools, colleges, and universities, that currently
67: are running - or in the future will run - courses
1.22 albertel 68: 2) STAND-ALONE - you want this machine to run in 'stand-alone' mode and
69: not be connected to other LON-CAPA machines for now
1.30 www 70: 3) DEVELOPMENT - you want to do software (not content!) development with
71: this workstation and eventually link it with the
72: workstations of other LON-CAPA software developers.
1.40 albertel 73: 4) RUNNING YOUR OWN CLUSTER - this machine is not in the standard LON-CAPA
74: clusters and won't be in the future and you want the existing
75: hosts.tab and domain.tab files to be left alone.
76: (This choice is unlikely what you want to select.)
1.22 albertel 77: END
78: # Option number 26 will install rawhide_hosts.tab, but
79: # the typical user does not want to be part of an intensive
80: # machine test cluster.
81:
82: # get input
83: # if valid then process, otherwise loop
84: $flag=0;
85: while (!$flag) {
86: print "ENTER 1, 2, 3, or 4:\n";
87: my $choice=<>;
88: chomp($choice);
89: if ($choice==1) {
90: $lonCluster='production'; $flag=1;
91: }
92: elsif ($choice==2) {
93: $lonCluster='standalone'; $flag=1;
94: }
95: elsif ($choice==3) {
96: $lonCluster='development'; $flag=1;
97: }
98: elsif ($choice==4) {
99: $lonCluster='existing'; $flag=1;
1.52 albertel 100: foreach my $file ('hosts.tab','dns_hosts.tab',
101: 'domain.tab','dns_domain.tab') {
102: if (-e '/home/httpd/lonTabs/'.$file) {
103: `cp /home/httpd/lonTabs/$file ../existing_$file`;
104: }
105: else {
106: print <<END;
107: There is no existing /home/httpd/lonTabs/$file
1.22 albertel 108: END
1.52 albertel 109: die('');
110: }
1.27 albertel 111: }
1.22 albertel 112: }
113: elsif ($choice==26) {
114: $lonCluster='rawhide'; $flag=1;
115: }
116: }
117: }
118: </perlscript>
119: </file>
120: <file>
1.10 harris41 121: <target dist='default'>/home/httpd/lonTabs/hosts.tab</target>
1.1 harris41 122: <perlscript mode='fg'>
1.4 harris41 123: $|=1;
1.20 albertel 124: my $domainDescription;
1.29 albertel 125: my $domainTabExtras;
1.43 raeburn 126: my $primaryLibServer;
1.60 raeburn 127: my $protocol;
1.65 raeburn 128: my $intdom;
1.43 raeburn 129: my @libservers = ();
1.1 harris41 130: unless (-e "<TARGET />") {
131: print(<<END);
132: WELCOME TO LON-CAPA!
133:
134: If you have questions, please visit http://install.lon-capa.org
1.32 raeburn 135: or contact helpdesk\@lon-capa.org.
1.1 harris41 136:
137: ===============================================================================
1.70 raeburn 138: The following 7 values are needed to configure LON-CAPA:
1.4 harris41 139: * Machine Role
1.8 harris41 140: * LON-CAPA Domain Name
141: * LON-CAPA Machine ID Name, and
1.47 albertel 142: * Server Administration E-mail Address.
1.68 raeburn 143: * LON-CAPA Domain's Primary Library Server Machine ID
144: * Web Server Protocol
145: * Internet Domain Name of Your Institution
1.32 raeburn 146: ===============================================================================
147:
148: In addition, a Support E-mail Address can also be included. If
149: an address is included then one of the options in the LON-CAPA
150: help menu will be a link to a form that a user will complete to
151: request LON-CAPA help.
152:
1.1 harris41 153: END
1.3 harris41 154:
1.4 harris41 155: open(OUT,'>/tmp/loncapa_updatequery.out');
156: close(OUT);
157:
1.3 harris41 158: # query for Machine Role
159: print(<<END);
160: **** Machine Role ****
161: Library server (recommended if first-time installation of LON-CAPA):
162: Servers that are repositories of authoritative educational resources.
163: These servers also provide the construction space by which instructors
164: assemble their classroom online material.
165: Access server:
166: Servers that load-balance high-traffic delivery of educational resources
167: over the world-wide web.
1.4 harris41 168: 1) Will this be a library server? (recommended if this is your first install)
1.3 harris41 169: 2) Or, will this be an access server?
170: END
1.4 harris41 171: my $flag=0;
172: my $r='';
173: my $lonRole;
174: while (!$flag) {
175: print "ENTER A CHOICE OF 1 or 2:\n";
176: my $choice=<>;
177: chomp($choice);
178: if ($choice==1) {
179: open(OUT,'>>/tmp/loncapa_updatequery.out');
180: print(OUT 'lonRole'."\t".'library'."\n");
181: close(OUT);
182: $lonRole='library';
183: $r='l';
184: $flag=1;
185: }
186: elsif ($choice==2) {
187: open(OUT,'>>/tmp/loncapa_updatequery.out');
188: print(OUT 'lonRole'."\t".'access'."\n");
189: close(OUT);
190: $lonRole='access';
191: $r='a';
192: $flag=2;
193: }
194: else {
195:
196: }
197: }
1.3 harris41 198:
199: # need to recommend a machine ID name (ipdomain.l.somenumber)
1.36 albertel 200: my $hostname=`hostname -f`; chomp($hostname);
1.4 harris41 201: my $ipdomain='';
202: if ($hostname=~/([^\.]*)\.([^\.]*)$/) {
203: $ipdomain=$1;
204: }
1.1 harris41 205:
206: print(<<END);
207:
1.8 harris41 208: **** Domain ****
1.45 www 209: [This does NOT need to correspond to internet address domains.
210: Please make this name short AND descriptive of your organization.
211: Domain names are close to impossible to change later!!!
212: Good examples might be "msu" or "bionet" or "vermontcc".
213: Bad examples are "physics" (too general)
1.37 www 214: or "michiganstateuniversity" (too long)
215: or "msuedu" (internet domain, just make it "msu")
1.45 www 216: or "msuphysics" (only if there is a good reason to limit to department
217: - we don't know of one)
1.37 www 218: or "mydomain" (what is that?)
1.45 www 219: Avoid multiple domains at the same institution, even if it means that you
220: have to actually work together with your colleagues. You can still run
221: multiple library servers within the same domain.
222: If this domain is eventually going to be part of the main production
223: cluster, you MUST contact the LON-CAPA group at MSU (loncapa@loncapa.org)
224: to have a domain name assigned, and then use it exactly as given. This is
225: also true for test installs that might eventually turn into production setups.
226: Stop now if you didn't do so.]
1.1 harris41 227: END
1.8 harris41 228:
229: # get domain name
1.1 harris41 230: # accept if valid, if not valid, tell user and repeat
1.4 harris41 231: $flag=0;
1.8 harris41 232: my $lonDefDomain;
1.4 harris41 233: while (!$flag) {
234: if ($ipdomain) {
235: print(<<END);
1.8 harris41 236: ENTER LONCAPA DOMAIN [$ipdomain]:
1.4 harris41 237: END
238: }
239: else {
240: print(<<END);
1.8 harris41 241: ENTER LONCAPA DOMAIN:
1.4 harris41 242: END
243: }
244: my $choice=<>;
245: chomp($choice);
1.18 harris41 246: my $bad_domain_flag=0;
1.41 albertel 247: my @bad_domain_names=('res','raw','userfiles','priv','adm','uploaded',
248: 'editupload');
1.18 harris41 249: foreach my $bad (@bad_domain_names) {
250: $bad_domain_flag=1 if $choice eq $bad;
251: }
1.37 www 252: if ($choice=~/capa/i) {
253: $bad_domain_flag=1;
254: }
1.8 harris41 255: if ($ipdomain and $choice=~/^\s*$/) {
256: $choice=$ipdomain;
1.4 harris41 257: open(OUT,'>>/tmp/loncapa_updatequery.out');
1.8 harris41 258: print(OUT 'lonDefDomain'."\t".$choice."\n");
1.4 harris41 259: close(OUT);
1.8 harris41 260: $lonDefDomain=$choice;
1.4 harris41 261: $flag=1;
1.51 albertel 262: } elsif (length($choice)>35) {
1.37 www 263: print "Name too long\n";
264: } elsif (length($choice)<2) {
265: print "Name too short\n";
1.38 www 266: } elsif ($bad_domain_flag) {
267: print "Invalid input ('$choice' conflicts with LON-CAPA namespace).\n";
268: print "Please try something different than '$choice'\n";
1.51 albertel 269: } elsif ($choice!~/\_/ and $choice=~/^[\w\-.]+$/) {
1.4 harris41 270: open(OUT,'>>/tmp/loncapa_updatequery.out');
1.8 harris41 271: print(OUT 'lonDefDomain'."\t".$choice."\n");
1.4 harris41 272: close(OUT);
1.8 harris41 273: $lonDefDomain=$choice;
274: $r='l';
1.4 harris41 275: $flag=1;
1.37 www 276: } else {
1.51 albertel 277: print "Invalid input (only alphanumeric characters, '-', and '.' supported).\n";
1.4 harris41 278: }
279: }
1.1 harris41 280:
1.20 albertel 281:
282: # get domain description
283: # accept if valid, if not valid, tell user and repeat
284: $flag=0;
285:
286: while (!$flag) {
287: print(<<END);
288:
289: **** Domain Description ****
290: String describing the domain, to be shown to users.
291: [Example, msu is Michigan State University]
292: ENTER DOMAIN DESCRIPTION:
293: END
294:
295: my $choice=<>;
296: chomp($choice);
297: if ($choice!~/:/) {
298: open(OUT,'>>/tmp/loncapa_updatequery.out');
299: print(OUT 'domainDescription'."\t".$choice."\n");
300: close(OUT);
301: $domainDescription=$choice;
302: $flag=1;
303: }
304: else {
305: print "Invalid input (no ':' allowed).\n";
306: }
307: }
308:
1.8 harris41 309: my $lonHostID;
310: if ($lonDefDomain) {
311: $lonHostID=$lonDefDomain.$r.int(1+rand(9)); # should be probably also detect
312: # against the hosts.tab
313: }
314:
1.1 harris41 315: print(<<END);
316:
1.8 harris41 317: **** Machine ID Name ****
1.45 www 318: [This does NOT need to correspond to internet address names;
1.8 harris41 319: this name MUST be unique to the whole LON-CAPA network;
1.45 www 320: we recommend that you use a name based off of your institution.
321: Good examples: "msul1" or "bioneta2".
322: Bad examples: "loncapabox" or "studentsinside".
1.37 www 323: Note that machine names are very hard to change later.]
1.1 harris41 324: END
1.8 harris41 325: # get machine name
1.1 harris41 326: # accept if valid, if not valid, tell user and repeat
1.4 harris41 327: $flag=0;
328: while (!$flag) {
329: if ($ipdomain) {
330: print(<<END);
1.8 harris41 331: ENTER LONCAPA MACHINE ID [$lonHostID]:
1.4 harris41 332: END
333: }
334: else {
335: print(<<END);
1.8 harris41 336: ENTER LONCAPA MACHINE ID:
1.4 harris41 337: END
338: }
339: my $choice=<>;
340: chomp($choice);
1.37 www 341: if ($choice=~/capa/i) {
342: print "Invalid input (names containing 'capa' are reserved).\n";
343: } elsif ($lonHostID and $choice=~/^\s*$/) {
1.8 harris41 344: $choice=$lonHostID;
1.4 harris41 345: open(OUT,'>>/tmp/loncapa_updatequery.out');
1.8 harris41 346: print(OUT 'lonHostID'."\t".$choice."\n");
1.4 harris41 347: close(OUT);
1.8 harris41 348: $lonHostID=$choice;
1.4 harris41 349: $flag=1;
1.51 albertel 350: } elsif (length($choice)>45) {
1.37 www 351: print "Name too long\n";
352: } elsif (length($choice)<4) {
353: print "Name too short\n";
1.51 albertel 354: } elsif ($choice!~/\_/ and $choice=~/^[\w\-.]+$/) {
1.4 harris41 355: open(OUT,'>>/tmp/loncapa_updatequery.out');
1.8 harris41 356: print(OUT 'lonHostID'."\t".$choice."\n");
1.4 harris41 357: close(OUT);
1.8 harris41 358: $lonHostID=$choice;
1.4 harris41 359: $flag=1;
1.37 www 360: } else {
1.51 albertel 361: print "Invalid input (only alphanumeric characters, '-', and '.' supported).\n";
1.4 harris41 362: }
363: }
1.1 harris41 364:
1.43 raeburn 365: # get primary library server in domain
366: if ($lonRole eq 'library') {
367: if (!grep/^\Q$lonHostID\E$/,@libservers) {
368: push(@libservers,$lonHostID);
369: }
370: if (@libservers == 1) {
371: $primaryLibServer = $libservers[0];
372: }
373: }
1.68 raeburn 374:
375: $flag=0;
1.43 raeburn 376: while (!$flag) {
377: print(<<END);
378: **** Domain's Primary Library Server ID ****
379: This should be the LON-CAPA machine ID of a library server in your
380: domain. If you only have a single library server in your domain, then
381: the Primary Library server ID will be the machine ID of that server.
382: This server will be where domain data which are not associated with any
383: specific home library server will be stored (e.g., e-mail broadcast by
384: administrators to users in the domain).
385: END
386: if (defined($primaryLibServer)) {
387: print(<<END);
388: ENTER DOMAIN'S PRIMARY LIBRARY SERVER ID [$primaryLibServer]:
389: END
390: } elsif (@libservers > 0) {
391: print(<<END);
392: ENTER DOMAIN'S PRIMARY LIBRARY SERVER ID [$libservers[0]]
393: END
394: } else {
395: print (<<END);
396: No library servers could be identified for this domain. If you have already installed LON-CAPA on a different server (designated as a library server) in this domain, please enter the LONCAPA MACHINE ID of that server. If not, you will need to install a LON-CAPA library server. Enter the MACHINE ID of the server you plan to designate as a library server.
397: END
398: }
399:
400: my $choice=<>;
401: chomp($choice);
402: if ($primaryLibServer and $choice=~/^\s*$/) {
403: $choice=$primaryLibServer;
404: open(OUT,'>>/tmp/loncapa_updatequery.out');
405: print(OUT 'primaryLibServer'."\t".$choice."\n");
406: close(OUT);
407: $flag=1;
1.51 albertel 408: } elsif (length($choice)>35) {
1.43 raeburn 409: print "Name too long\n";
410: } elsif (length($choice)<4) {
411: print "Name too short\n";
1.51 albertel 412: } elsif ($choice!~/\_/ and $choice=~/^[\w\-.]+$/) {
1.43 raeburn 413: open(OUT,'>>/tmp/loncapa_updatequery.out');
414: print(OUT 'primaryLibServer'."\t".$choice."\n");
415: close(OUT);
416: $primaryLibServer=$choice;
417: $flag=1;
418: } else {
1.51 albertel 419: print "Invalid input (only alphanumeric characters, '-', and '.' supported).\n";
1.43 raeburn 420: }
421: }
422:
423:
1.32 raeburn 424: # get admin e-mail address
1.4 harris41 425: # accept if valid, if not valid, tell user and repeat
426: $flag=0;
1.9 harris41 427: my $lonAdmEMail;
1.4 harris41 428: while (!$flag) {
1.1 harris41 429: print(<<END);
430:
1.55 albertel 431: **** Server Administrators E-mail ****
1.1 harris41 432: E-mail address of the person who will manage this machine
1.4 harris41 433: [should be in the form somebody\@somewhere]
1.32 raeburn 434: ENTER ADMIN E-MAIL ADDRESS:
1.1 harris41 435: END
436:
1.4 harris41 437: my $choice=<>;
438: chomp($choice);
439: if ($choice=~/\@/) {
440: open(OUT,'>>/tmp/loncapa_updatequery.out');
1.9 harris41 441: print(OUT 'lonAdmEMail'."\t".$choice."\n");
1.4 harris41 442: close(OUT);
1.9 harris41 443: $lonAdmEMail=$choice;
1.4 harris41 444: $flag=1;
445: }
446: else {
447: print "Invalid input (this needs to look like an e-mail address!).\n";
448: }
449: }
450:
1.32 raeburn 451:
452: # get support e-mail address
453: # accept if valid, if not valid, tell user and repeat
454: $flag=0;
455: my $lonSupportEMail;
456: while (!$flag) {
457: print(<<END);
458:
459: **** Support E-mail ****
460: E-mail address of the person who will receive
461: help requests from LON-CAPA users who access
462: the system via this server. If the address is left blank,
463: then a help support form will not be displayed
464: as part of the help menu.
465: [should be in the form somebody\@somewhere]
466: ENTER SUPPORT E-MAIL ADDRESS:
467: END
468:
469: my $choice=<>;
470: chomp($choice);
471: $choice =~ s/\s//g;
1.33 albertel 472: if ( ($choice=~/\@/) || $choice eq '') {
1.32 raeburn 473: open(OUT,'>>/tmp/loncapa_updatequery.out');
474: print(OUT 'lonSupportEMail'."\t".$choice."\n");
475: close(OUT);
476: $lonSupportEMail=$choice;
477: $flag=1;
478: }
479: else {
480: print "Invalid input (this either needs to be blank, or look like an e-mail address!).\n";
481: }
482: }
483:
1.68 raeburn 484: # get protocol
485: # accept if valid, if not valid, tell user and repeat
486: $flag=0;
1.60 raeburn 487: while (!$flag) {
488: print(<<END);
489:
490: **** Web Server Protocol ****
491: If you plan to run the Apache server with SSL enabled,
492: the protocol should be: https; otherwise it should be http.
1.68 raeburn 493: ENTER WEB SERVER PROTOCOL [http]:
1.60 raeburn 494: END
495:
496: my $choice=<>;
497: chomp($choice);
1.65 raeburn 498: if ($choice =~ /^https?$/) {
1.60 raeburn 499: open(OUT,'>>/tmp/loncapa_updatequery.out');
500: print(OUT 'protocol'."\t".$choice."\n");
501: close(OUT);
502: $protocol=$choice;
503: $flag=1;
1.68 raeburn 504: } elsif ($choice eq '') {
505: open(OUT,'>>/tmp/loncapa_updatequery.out');
506: print(OUT 'protocol'."\t".'http'."\n");
507: close(OUT);
508: $protocol = 'http';
509: $flag = 1;
510: } else {
1.60 raeburn 511: print "Invalid input (only http or https allowed).\n";
512: }
513: }
1.32 raeburn 514:
1.68 raeburn 515: # get internet domain
516: # accept if valid, if not valid, tell user and repeat
517: $flag=0;
1.65 raeburn 518: while (!$flag) {
519: print(<<END);
520:
521: **** Internet Domain Name of Your Institution ****
522:
523: The internet domain name used for servers at your institution
524: should be provided. This will be similar to: ustate.edu or
525: topcollege.ac.uk or my.hostingcompany.com, i.e., the part of
526: a server hostname which indicates to which organization the
527: server belongs.
528:
529: ENTER INTERNET DOMAIN NAME:
530: END
531:
532: my $choice=<>;
533: chomp($choice);
534: if ($choice =~/[^.]+\.[^.]+/) {
535: open(OUT,'>>/tmp/loncapa_updatequery.out');
1.68 raeburn 536: print(OUT 'internet domain'."\t".$choice."\n");
1.65 raeburn 537: close(OUT);
538: $intdom=$choice;
539: $flag=1;
540: }
541: else {
542: print "Invalid input (must be at least two levels separated by . - e.g., ustate.edu).\n";
543: }
544: }
545:
546:
1.1 harris41 547: # update loncapa.conf
1.49 raeburn 548: my $confdir = '/etc/httpd/conf/';
1.73 ! raeburn 549: if ('<DIST />' eq 'sles10' || '<DIST />' eq 'sles11' || '<DIST />' eq 'suse10.1' || '<DIST />' eq 'suse10.2' || '<DIST />' eq 'suse10.3' || '<DIST />' eq 'suse11.1' || '<DIST />' eq 'suse11.2' || '<DIST />' eq 'suse11.3' || '<DIST />' eq 'suse11.4' || '<DIST />' eq 'suse12.1' || '<DIST />' eq 'debian5' || '<DIST />' eq 'debian6' || '<DIST />' eq 'ubuntu6' || '<DIST />' eq 'ubuntu8' || '<DIST />' eq 'ubuntu10') {
1.49 raeburn 550: $confdir = '/etc/apache2/';
551: }
1.5 harris41 552: my $filename='loncapa.conf';
553: my %perlvar;
554: if (-e "$confdir$filename") {
555: open(CONFIG,'<'.$confdir.$filename) or die("Can't read $confdir$filename");
556: while (my $configline=<CONFIG>) {
557: if ($configline =~ /^[^\#]*PerlSetVar/) {
558: my ($unused,$varname,$varvalue)=split(/\s+/,$configline);
559: chomp($varvalue);
1.12 harris41 560: $perlvar{$varname}=$varvalue if $varvalue!~/^\{\[\[\[\[/;
1.5 harris41 561: }
562: }
563: close(CONFIG);
564: }
565: $perlvar{'lonHostID'}=$lonHostID;
566: $perlvar{'lonDefDomain'}=$lonDefDomain;
1.9 harris41 567: $perlvar{'lonAdmEMail'}=$lonAdmEMail;
1.32 raeburn 568: $perlvar{'lonSupportEMail'}=$lonSupportEMail;
1.5 harris41 569: $perlvar{'lonRole'}=$lonRole;
1.16 harris41 570: unless ($perlvar{'lonLoadLim'} and $perlvar{'lonLoadLim'}!~/\{\[\[\[\[/) {
1.5 harris41 571: $perlvar{'lonLoadLim'}='2.00';
572: }
1.25 albertel 573: unless ($perlvar{'lonUserLoadLim'} and $perlvar{'lonUserLoadLim'}!~/\{\[\[\[\[/) {
574: $perlvar{'lonUserLoadLim'}='0';
575: }
1.16 harris41 576: unless ($perlvar{'lonExpire'} and $perlvar{'lonExpire'}!~/\{\[\[\[\[/) {
1.5 harris41 577: $perlvar{'lonExpire'}='86400';
578: }
1.16 harris41 579: unless ($perlvar{'lonReceipt'} and $perlvar{'lonReceipt'}!~/\{\[\[\[\[/) {
1.5 harris41 580: my $lonReceipt='';
1.11 harris41 581: srand(time ^ $$ ^ unpack "%L*", `ps axww | gzip`);
1.5 harris41 582: my @alnum=(0..9,a..z);
583: foreach my $i (1..20) {
584: $lonReceipt.=$alnum[int(rand(36))];
585: }
586: $perlvar{'lonReceipt'}=$lonReceipt;
587: }
588: open(OUT,">$confdir$filename") or
589: die("Cannot output to $confdir$filename\n");
590: foreach my $key (keys %perlvar) {
591: my $value=$perlvar{$key};
1.49 raeburn 592: my $line = "PerlSetVar $key $value";
593: if ($value eq '') {
594: $line = '#'.$line;
595: }
1.5 harris41 596: print(OUT <<END);
1.49 raeburn 597: $line
1.5 harris41 598: END
599: }
600: close(OUT);
1.1 harris41 601: }
602: </perlscript>
603: </file>
604: <file>
1.49 raeburn 605: <target dist='default'>/etc/httpd/conf/</target>
1.72 raeburn 606: <target dist='sles10 sles11 suse10.1 suse10.2 suse10.3 suse11.1 suse11.2 suse11.3 suse11.4 suse12.1 debian5 debian6 ubuntu6 ubuntu8 ubuntu10'>/etc/apache2/</target>
1.1 harris41 607: <perlscript mode='fg'>
1.31 albertel 608: sub securesetting {
609: my (%perlvar)=@_;
610: my $securestatus='unknown';
611: my $securenum='';
612: if ( $perlvar{'loncAllowInsecure'}&& $perlvar{'londAllowInsecure'}) {
613: $securestatus='no'; $securenum='4';
614: } elsif ( $perlvar{'loncAllowInsecure'}&& !$perlvar{'londAllowInsecure'}) {
615: $securestatus='lond'; $securenum='3';
616: } elsif (!$perlvar{'loncAllowInsecure'}&& $perlvar{'londAllowInsecure'}) {
617: $securestatus='lonc'; $securenum='2';
618: } elsif (!$perlvar{'loncAllowInsecure'}&& !$perlvar{'londAllowInsecure'}) {
619: $securestatus='yes (lond and lonc)'; $securenum='1';
620: }
621: return ($securestatus,$securenum);
622: }
1.1 harris41 623: # read values from loncapa.conf
1.49 raeburn 624: my $confdir = "<TARGET />";
1.5 harris41 625: my $filename='loncapa.conf';
626: my %perlvar;
1.31 albertel 627: my ($securestatus,$securenum);
1.5 harris41 628: if (-e "$confdir$filename") {
629: open(CONFIG,'<'.$confdir.$filename) or
630: die("Can't read $confdir$filename");
631: while (my $configline=<CONFIG>) {
632: if ($configline =~ /^[^\#]*PerlSetVar/) {
633: my ($unused,$varname,$varvalue)=split(/\s+/,$configline);
634: chomp($varvalue);
635: $perlvar{$varname}=$varvalue;
636: }
637: }
638: close(CONFIG);
639: }
1.16 harris41 640: unless ($perlvar{'lonLoadLim'} and $perlvar{'lonLoadLim'}!~/\{\[\[\[\[/) {
641: $perlvar{'lonLoadLim'}='2.00';
642: }
1.25 albertel 643: unless ($perlvar{'lonUserLoadLim'} and $perlvar{'lonUserLoadLim'}!~/\{\[\[\[\[/) {
644: $perlvar{'lonUserLoadLim'}='0';
645: }
1.16 harris41 646: unless ($perlvar{'lonExpire'} and $perlvar{'lonExpire'}!~/\{\[\[\[\[/) {
647: $perlvar{'lonExpire'}='86400';
648: }
1.31 albertel 649: unless ($perlvar{'londAllowInsecure'} and $perlvar{'londAllowInsecure'}!~/\{\[\[\[\[/) {
650: $perlvar{'londAllowInsecure'}='1';
651: }
652: unless ($perlvar{'loncAllowInsecure'} and $perlvar{'loncAllowInsecure'}!~/\{\[\[\[\[/) {
653: $perlvar{'loncAllowInsecure'}='1';
654: }
655: ($securestatus,$securenum)=&securesetting(%perlvar);
1.16 harris41 656: unless ($perlvar{'lonReceipt'} and $perlvar{'lonReceipt'}!~/\{\[\[\[\[/) {
657: my $lonReceipt='';
658: srand(time ^ $$ ^ unpack "%L*", `ps axww | gzip`);
659: my @alnum=(0..9,a..z);
660: foreach my $i (1..20) {
661: $lonReceipt.=$alnum[int(rand(36))];
662: }
663: $perlvar{'lonReceipt'}=$lonReceipt;
664: }
1.7 harris41 665: my %perlvarstatic;
666: if (-e "${confdir}loncapa_apache.conf") {
667: open(CONFIG,'<'.$confdir.'loncapa_apache.conf') or
668: die("Can't read ${confdir}loncapa_apache.conf");
669: while (my $configline=<CONFIG>) {
670: if ($configline =~ /^[^\#]*PerlSetVar/) {
671: my ($unused,$varname,$varvalue)=split(/\s+/,$configline);
672: chomp($varvalue);
673: $perlvarstatic{$varname}=$varvalue;
674: }
675: }
676: close(CONFIG);
677: }
1.55 albertel 678:
679: my (@hosts_files, @domain_files);
680: if ( $lonCluster ne 'existing') {
681: push(@domain_files,'../'.$lonCluster.'_domain.tab',
682: '../'.$lonCluster.'_dns_domain.tab');
683: push(@hosts_files,'../'.$lonCluster.'_hosts.tab',
684: '../'.$lonCluster.'_dns_hosts.tab');
685: }
686: push(@domain_files,'/home/httpd/lonTabs/domain.tab',
687: '/home/httpd/lonTabs/dns_domain.tab');
688: push(@hosts_files,'/home/httpd/lonTabs/hosts.tab',
689: '/home/httpd/lonTabs/dns_hosts.tab');
690:
1.23 albertel 691: if (!$domainDescription) {
1.55 albertel 692: foreach my $file (@domain_files) {
693: open(IN,'<'.$file);
694: while(my $line = <IN>) {
695: if ($line =~ /^\Q$perlvar{'lonDefDomain'}\E\:/) {
696: (undef,$domainDescription,$domainTabExtras)=split(/:/,$line,3);
697: chomp($domainDescription);
698: chomp($domainTabExtras);
1.60 raeburn 699: # the remaining field (primary lib server) is handled later
1.55 albertel 700: $domainTabExtras = join(':',(split(/:/,$domainTabExtras))[0..5]);
701: last;
702: }
703: }
704: close(IN);
705: last if ($domainDescription);
706: }
1.23 albertel 707: }
1.55 albertel 708:
1.60 raeburn 709: if (!$protocol) {
710: foreach my $file (@hosts_files) {
711: open(IN,'<'.$file);
712: while(my $line = <IN>) {
1.66 raeburn 713: if ($line =~ /^\Q$perlvar{'lonHostID'}\E:\Q$perlvar{'lonDefDomain'}\E\:(?:access|library)\:[^:]+\:(https?)/) {
1.60 raeburn 714: $protocol = $1;
1.66 raeburn 715: chomp($protocol);
1.60 raeburn 716: last;
717: }
718: }
719: }
720: }
721:
722: if (!$protocol) {
723: $protocol = 'http';
724: }
725:
1.65 raeburn 726: if (!$intdom) {
727: foreach my $file (@hosts_files) {
728: open(IN,'<'.$file);
729: while(my $line = <IN>) {
1.66 raeburn 730: if ($line =~ /^\Q$perlvar{'lonHostID'}\E:\Q$perlvar{'lonDefDomain'}\E\:(?:access|library)\:[^:]+\:https?\:([^:]+)/) {
1.65 raeburn 731: $intdom = $1;
1.66 raeburn 732: chomp($intdom);
1.65 raeburn 733: last;
734: }
735: }
736: }
737: }
738:
1.55 albertel 739: while(!$primaryLibServ && (@hosts_file || @domain_files)) {
740: my $file = shift(@domain_files);
741: open(IN,'<'.$file);
742: while(my $line = <IN>) {
743: if ($line =~ /^\Q$perlvar{'lonDefDomain'}\E\:/) {
744: $primaryLibServer=(split(/:/,$line))[8];
1.43 raeburn 745: chomp($primaryLibServer);
746: }
747: }
748: close(IN);
1.55 albertel 749: last if ($primaryLibServer);
750: $file = shift(@hosts_files);
751: open(IN,'<'.$file);
752: while(my $line = <IN>) {
753: if ($line =~ /^([^\:]+)\:\Q$perlvar{'lonDefDomain'}\E\:library\:/) {
754: push(@libservers,$1);
755: }
756: }
1.58 albertel 757: # make list unique
758: @libservers = keys(%{{ map { $_ => 1 } (@libservers) }});
1.55 albertel 759: close(IN);
760: if (@libservers == 1) {
761: $primaryLibServer = $libservers[0];
762: }
1.43 raeburn 763: }
1.23 albertel 764:
1.6 harris41 765: # implement editing logic below, interactively
1.65 raeburn 766: # update loncapa.conf until 14 is entered
1.6 harris41 767:
768: $flag=0;
1.17 harris41 769:
1.6 harris41 770: while (!$flag) {
1.1 harris41 771: print(<<END);
772:
773: ===============================================================================
774: This is now the current configuration of your machine.
1.31 albertel 775: 1) Domain Name: $perlvar{'lonDefDomain'}
776: 2) Domain Description: $domainDescription
777: 3) Machine Name: $perlvar{'lonHostID'}
1.43 raeburn 778: 4) ID of primary library server for domain: $primaryLibServer
1.47 albertel 779: 5) Server Administrator's E-mail Address: $perlvar{'lonAdmEMail'}
1.43 raeburn 780: 6) Support E-mail Address: $perlvar{'lonSupportEMail'}
1.60 raeburn 781: 7) Web Server Protocol (http or https): $protocol
1.65 raeburn 782: 8) Internet Domain Name: $intdom
783: 9) Role: $perlvar{'lonRole'}
784: 10) Cache Expiration Time: $perlvar{'lonExpire'}
785: 11) Server Load: $perlvar{'lonLoadLim'}
786: 12) User Load: $perlvar{'lonUserLoadLim'}
787: 13) Allow only secure connections: $securestatus
788: 14) Everything is correct up above
1.6 harris41 789: END
1.38 www 790:
1.54 albertel 791: my @error;
1.38 www 792: foreach my $v ($perlvar{'lonDefDomain'},$perlvar{'lonHostID'}) {
1.51 albertel 793: if (length($v)>35) { $error.="\nName $v too long"; }
1.38 www 794: if (length($v)<2) { $error.="\nName $v too short"; }
1.39 albertel 795: if ($v=~/capa/i) {
796: if ($v!~/^oucapa\d+$/ &&
797: ($v!~/^capa\d+$/ && $perlvar{'lonDefDomain'} eq 'uwsp')) {
1.54 albertel 798: push(@error,"Name $v contains 'capa'");
1.39 albertel 799: }
800: }
1.41 albertel 801: foreach my $bad ('res','raw','userfiles','priv','adm','uploaded',
802: 'editupload') {
1.54 albertel 803: push(@error,"\nName $v reserved.") if $v eq $bad;
1.38 www 804: }
1.54 albertel 805: if ($v=~/[^\w\-.]/) { push(@error,"Name $v contains special characters"); }
1.38 www 806: }
1.53 albertel 807: if ($domainDescription =~ /^\s*$/) {
1.54 albertel 808: push(@error,"Domain Description is blank.");
1.53 albertel 809: } elsif ($domainDescription!~/^[\(\)\-\w\s,]+$/) {
1.54 albertel 810: push(@error,"Domain Description contains special characters.");
1.38 www 811: }
812: foreach my $v ($perlvar{'lonExpire'},$perlvar{'lonLoadLim'}) {
1.54 albertel 813: unless ($v=~/^[\d+\.]+$/) { push(@error,"Number expected instead of $v"); }
1.38 www 814: }
815: unless (($perlvar{'lonRole'} eq 'library') || ($perlvar{'lonRole'} eq 'access')) {
1.54 albertel 816: push(@error,"Invalid Role");
1.17 harris41 817: }
1.43 raeburn 818:
1.60 raeburn 819: unless (($protocol eq 'http') || ($protocol eq 'https')) {
820: push(@error,"Invalid Protocol (must be http or https");
821: }
822:
1.65 raeburn 823: if (!defined($intdom)) {
824: push(@error,"No internet domain name designated. Enter something like ustate.edu");
1.71 raeburn 825: } elsif ($intdom !~ /[^.]+\.\w{2,6}$/) {
1.65 raeburn 826: push(@error,"Invalid Internet domain name (must be at least two levels separated by . - e.g., ustate.edu");
827: }
828:
1.43 raeburn 829: if (!defined($primaryLibServer)) {
830: if (@libservers > 0) {
1.54 albertel 831: push(@error,"No primary library server ID designated. Choose from: ".join(',',sort(@libservers)));
1.43 raeburn 832: } else {
1.54 albertel 833: push(@error,"No library servers in this domain (including current server)");
1.43 raeburn 834: }
835: } else {
1.54 albertel 836: if (length($primaryLibServer)>35) { push(@error,"Primary Library Server ID: $primaryLibServer too long"); }
837: if (length($primaryLibServer)<2) { push(@error,"Primary Library Server ID: $primaryLibServer too short"); }
1.43 raeburn 838: if ($primaryLibServer =~/capa/i) {
839: if ($primaryLibServer!~/^oucapa\d+$/ &&
840: ($primaryLibServer!~/^capa\d+$/ && $perlvar{'lonDefDomain'} eq 'uwsp')) {
1.54 albertel 841: push(@error,"Primary library server ID $primaryLibServer contains 'capa'")
1.43 raeburn 842: }
843: }
844: foreach my $bad ('res','raw','userfiles','priv','adm','uploaded',
845: 'editupload') {
1.54 albertel 846: push(@error,"Primary library server ID $primaryLibServer reserved.") if $primaryLibServer eq $bad;
1.43 raeburn 847: }
1.54 albertel 848: if ($primaryLibServer=~/[^\w\-.]/) { push(@error,"Primary library server ID $primaryLibServer contains special characters"); }
1.43 raeburn 849: }
850:
851:
1.54 albertel 852: if (@error) { print "\n*** ERRORS: \n\t".join("\n\t",@error)."\n"; }
1.6 harris41 853: print(<<END);
1.65 raeburn 854: ENTER A CHOICE OF 1-13 TO CHANGE, otherwise ENTER 14:
1.1 harris41 855: END
1.5 harris41 856: my $choice=<>;
857: chomp($choice);
1.6 harris41 858: if ($choice==1) {
859: print(<<END);
1.16 harris41 860: 1) Domain Name: $perlvar{'lonDefDomain'}
1.20 albertel 861: ENTER NEW VALUE (this is an internal value used to identify a group of
862: LON-CAPA machines, it must be alphanumerical, we suggest
863: using a part of your actual DNS domain. For example, for
864: the machine loncapa.msu.edu, we set the Domain to msu):
1.6 harris41 865: END
866: my $choice2=<>;
867: chomp($choice2);
1.8 harris41 868: $perlvar{'lonDefDomain'}=$choice2;
1.6 harris41 869: }
870: elsif ($choice==2) {
871: print(<<END);
1.20 albertel 872: 2) Domain Description: $domainDescription
873: ENTER NEW VALUE (this should be a string that describes your domain, spaces
874: and punctuation are fine except for ':'):
875: END
876: my $choice2=<>;
877: chomp($choice2);
878: $domainDescription=$choice2;
879: }
880: elsif ($choice==3) {
881: print(<<END);
882: 3) Machine Name: $perlvar{'lonHostID'}
883: ENTER NEW VALUE (this will be the name of the machine in the LON-CAPA network
884: it cannot contain any of '_' '-' '.' or ':'. We suggest that
885: if you are in the domain 'example' and are the first library
886: server you enter 'examplel1') :
1.6 harris41 887: END
888: my $choice2=<>;
889: chomp($choice2);
1.8 harris41 890: $perlvar{'lonHostID'}=$choice2;
1.6 harris41 891: }
1.20 albertel 892: elsif ($choice==4) {
1.6 harris41 893: print(<<END);
1.43 raeburn 894: 4) ID of primary library server for domain: $primaryLibServer
895: ENTER NEW VALUE (this will be the LON-CAPA Machine ID of a library server in
896: your domain; it cannot contain any of '_' '-' '.' or ':'.
897: This server will be where domain data which are not
898: associated with any specific home library server
899: will be stored (e.g., e-mail broadcast by Domain Coordinators
900: to users in the domain).
901: END
902: my $choice2=<>;
903: chomp($choice2);
904: $primaryLibServer=$choice2;
905: }
906: elsif ($choice==5) {
907: print(<<END);
1.47 albertel 908: 5) Server Administrator's E-mail Address: $perlvar{'lonAdmEMail'}
1.6 harris41 909: ENTER NEW VALUE:
910: END
911: my $choice2=<>;
912: chomp($choice2);
1.9 harris41 913: $perlvar{'lonAdmEMail'}=$choice2;
1.6 harris41 914: }
1.43 raeburn 915: elsif ($choice==6) {
1.6 harris41 916: print(<<END);
1.43 raeburn 917: 6) Support E-mail Address: $perlvar{'lonSupportEMail'}
1.32 raeburn 918: ENTER NEW VALUE:
919: END
920: my $choice2=<>;
921: chomp($choice2);
922: $perlvar{'lonSupportEMail'}=$choice2;
923: }
1.43 raeburn 924: elsif ($choice==7) {
1.32 raeburn 925: print(<<END);
1.60 raeburn 926: 7) Server Protocol (http or https):
927: ENTER NEW VALUE: (this should be either 'http' or 'https'
928: if in doubt set to 'http'):
929: END
930: my $choice2=<>;
931: chomp($choice2);
932: $protocol=$choice2;
933: }
934: elsif ($choice==8) {
935: print(<<END);
1.65 raeburn 936: 8) Internet Domain Name of Institution
937: ENTER NEW VALUE:
938:
939: END
940: my $choice2=<>;
941: chomp($choice2);
942: $intdom=$choice2;
943: }
944: elsif ($choice==9) {
945: print(<<END);
946: 9) Role: $perlvar{'lonRole'}
1.20 albertel 947: ENTER NEW VALUE (this should be either 'access' or 'library'
948: if in doubt select 'library'):
1.6 harris41 949: END
950: my $choice2=<>;
951: chomp($choice2);
952: $perlvar{'lonRole'}=$choice2;
953: }
1.65 raeburn 954: elsif ($choice==10) {
1.6 harris41 955: print(<<END);
1.65 raeburn 956: 10) Cache Expiration Time: $perlvar{'lonExpire'}
1.20 albertel 957: ENTER NEW VALUE (in seconds, 86400 is a reasonable value):
1.6 harris41 958: END
959: my $choice2=<>;
960: chomp($choice2);
961: $perlvar{'lonExpire'}=$choice2;
962: }
1.65 raeburn 963: elsif ($choice==11) {
1.6 harris41 964: print(<<END);
1.65 raeburn 965: 11) Server Load: $perlvar{'lonLoadLim'}
1.6 harris41 966: ENTER NEW VALUE:
967: END
968: my $choice2=<>;
969: chomp($choice2);
970: $perlvar{'lonLoadLim'}=$choice2;
971: }
1.65 raeburn 972: elsif ($choice==12) {
1.25 albertel 973: print(<<END);
1.65 raeburn 974: 12) User Load: $perlvar{'lonUserLoadLim'}
1.25 albertel 975: Numer of users that can login before machine is 'overloaded'
1.26 albertel 976: ENTER NEW VALUE (integer value, 0 means there is no limit):
1.25 albertel 977: END
978: my $choice2=<>;
979: chomp($choice2);
980: $perlvar{'lonUserLoadLim'}=$choice2;
981: }
1.65 raeburn 982: elsif ($choice==13) {
1.31 albertel 983: print(<<END);
1.65 raeburn 984: 13) Allow only secure connections: $securestatus
1.31 albertel 985: The Lon-CAPA communication daemons lonc and lond can be configured to
986: allow only secure connections by default.
987:
988: POSSIBLE CHOICES:
989: 1) allow only secure connections and don't connect to machines that
990: can not be connected to securely
991: 2) allow only secure connections but allow this machine to connect to
992: machines that don't support secure connections
993: 3) allow insecure connections to this machine but only allow connections
994: to machines that support secure connections
995: 4) allow insecure connections
996: ENTER NEW VALUE (currenly $securenum):
997: END
998: my $choice2=<>;
999: chomp($choice2);
1000: if ($choice2 eq '1') {
1001: $perlvar{'loncAllowInsecure'}=0;$perlvar{'londAllowInsecure'}=0;
1002: } elsif ($choice2 eq '2') {
1003: $perlvar{'loncAllowInsecure'}=0;$perlvar{'londAllowInsecure'}=1;
1004: } elsif ($choice2 eq '3') {
1005: $perlvar{'loncAllowInsecure'}=1;$perlvar{'londAllowInsecure'}=0;
1006: } elsif ($choice2 eq '4') {
1007: $perlvar{'loncAllowInsecure'}=1;$perlvar{'londAllowInsecure'}=1;
1008: }
1009: ($securestatus,$securenum)=&securesetting(%perlvar);
1010: }
1.65 raeburn 1011: elsif (($choice==14) && (!$error)) {
1.6 harris41 1012: $flag=1;
1013: }
1014: else {
1.38 www 1015: print "Invalid input.\n";
1.6 harris41 1016: }
1017: }
1.7 harris41 1018: open(OUT,">$confdir$filename") or
1019: die("Cannot output to $confdir$filename\n");
1020: foreach my $key (keys %perlvar) {
1021: my $value=$perlvar{$key};
1.49 raeburn 1022: my $line = "PerlSetVar $key $value";
1023: if ($value eq '') {
1024: $line = '#'.$line;
1025: }
1.8 harris41 1026: print(OUT <<END) unless $perlvarstatic{$key};
1.49 raeburn 1027: $line
1.7 harris41 1028: END
1029: }
1030: close(OUT);
1.1 harris41 1031: </perlscript>
1032: </file>
1033: <file>
1034: <target dist='default'>loncom/hosts.tab</target>
1035: <perlscript mode='fg'>
1036: unless (-l "<TARGET />") {
1.36 albertel 1037: my $hostname=`hostname -f`;chomp($hostname);
1.15 harris41 1038: $date=`date -I`; chomp($date);
1039: $lonHostID=$perlvar{'lonHostID'};
1.51 albertel 1040: $lonHostID=~s/[^\w\-.]//g;
1.15 harris41 1041: $lineexistflag=0;
1042: $hostidexistflag=0;
1.22 albertel 1043: $line2insert=<<END;
1.65 raeburn 1044: $perlvar{'lonHostID'}:$perlvar{'lonDefDomain'}:$perlvar{'lonRole'}:$hostname:$protocol:$intdom
1.15 harris41 1045: END
1.57 albertel 1046: if (!$domainTabExtras) {
1047: $domainTabExtras=':::::';
1048: }
1.43 raeburn 1049: $domaininsert="$perlvar{'lonDefDomain'}:$domainDescription:$domainTabExtras:$primaryLibServer\n";
1.23 albertel 1050: if ($lonCluster eq 'standalone') {
1051: open(OUT,'>../'.$lonCluster.'_hosts.tab') or
1052: die('file generation error');
1053: print(OUT $line2insert);
1.60 raeburn 1054: print OUT ("^$hostname:$protocol\n");
1.52 albertel 1055: close(OUT);
1056: open(OUT,'>../'.$lonCluster.'_dns_hosts.tab') or
1057: die('file generation error');
1058: print(OUT $line2insert);
1.23 albertel 1059: close(OUT);
1.27 albertel 1060: open(OUT,'>../'.$lonCluster.'_domain.tab') or
1061: die('file generation error');
1062: print(OUT $domaininsert);
1063: close(OUT);
1.52 albertel 1064: open(OUT,'>../'.$lonCluster.'_dns_domain.tab') or
1065: die('file generation error');
1066: print(OUT $domaininsert);
1067: close(OUT);
1.23 albertel 1068: }
1.15 harris41 1069: if ($flag==1) {
1.6 harris41 1070: `rm -f ../hosts.tab`;
1.52 albertel 1071: `rm -f ../dns_hosts.tab`;
1072: `ln -s ${lonCluster}_dns_hosts.tab ../dns_hosts.tab`;
1073: open(IN,'<../'.$lonCluster.'_dns_hosts.tab');
1074: while(my $line = <IN>) {
1075: if ($line =~ /^\Q$line2insert\E$/) {
1.13 harris41 1076: $lineexistflag=1;
1077: }
1.52 albertel 1078: if ($line =~ /^\Q$lonHostID\E\:/) {
1.13 harris41 1079: $hostidexistflag=1;
1080: }
1081: }
1082: close(IN);
1083: if ($hostidexistflag and !$lineexistflag) {
1084: print <<END;
1085: WARNING: $lonHostID already exists inside
1.52 albertel 1086: loncapa/loncom/${lonCluster}_dns_hosts.tab. The entry inside
1087: ${lonCluster}_dns_hosts.tab does not match your settings.
1088: An entry inside ${lonCluster}_hosts.tab will be made
1.13 harris41 1089: with your new values.
1090: END
1.15 harris41 1091: `grep -v "$lonHostID:" ../${lonCluster}_hosts.tab > ../new_${lonCluster}_hosts.tab`;
1092: open(OUT,'>>../new_'.$lonCluster.'_hosts.tab') or
1093: die("cannot open loncom/${lonCluster}_hosts.tab for output\n");
1.14 harris41 1094: print(OUT $line2insert);
1.13 harris41 1095: close(OUT);
1.15 harris41 1096: `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;
1.13 harris41 1097: # email appropriate message
1.65 raeburn 1098: `echo "REPLACE:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "REPLACE:$lonCluster:$lonHostID:$protocol:$intdom:$date" installrecord\@mail.lon-capa.org`;
1.13 harris41 1099: }
1100: elsif ($hostidexistflag and $lineexistflag) {
1.15 harris41 1101: print <<END;
1.52 albertel 1102: Entry exists in ${lonCluster}_dns_hosts.tab. Making duplicate entry in ${lonCluster}_hosts.tab
1.15 harris41 1103: END
1.52 albertel 1104: `grep -v "$lonHostID:" ../${lonCluster}_hosts.tab > ../new_${lonCluster}_hosts.tab`;
1105: open(OUT,'>>../new_'.$lonCluster.'_hosts.tab') or
1106: die("cannot open loncom/${lonCluster}_hosts.tab for output\n");
1107: print(OUT $line2insert);
1108: close(OUT);
1109: `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;
1.15 harris41 1110: # email appropriate message
1.65 raeburn 1111: `echo "STABLEUPDATE:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "STABLEUPDATE:$lonCluster:$lonHostID:$protocol:$intdom:$date" installrecord\@mail.lon-capa.org`;
1.13 harris41 1112: }
1.15 harris41 1113: elsif (!$hostidexistflag and !$lineexistflag) {
1114: print <<END;
1115: New entry for $lonCluster.
1.6 harris41 1116: END
1.15 harris41 1117: `cat ../${lonCluster}_hosts.tab > ../new_${lonCluster}_hosts.tab`;
1.21 albertel 1118: open(OUT,'>>../new_'.$lonCluster.'_hosts.tab') or
1119: die("cannot open loncom/new_${lonCluster}_hosts.tab for output\n");
1.15 harris41 1120: print(OUT $line2insert);
1121: close(OUT);
1122: `ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;
1123: # email appropriate message
1.65 raeburn 1124: `echo "INSERT:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "INSERT:$lonCluster:$lonHostID:$protocol:$intdom:$date" installrecord\@mail.lon-capa.org`;
1.27 albertel 1125: }
1126: }
1127: $lineexistflag=0;
1128: if ($flag==1) {
1129: `rm -f ../domain.tab`;
1.52 albertel 1130: `rm -f ../dns_domain.tab`;
1131: `ln -s ${lonCluster}_dns_domain.tab ../dns_domain.tab`;
1132: open(IN,'<../'.$lonCluster.'_dns_domain.tab');
1133: while(my $line = <IN>) {
1134: if ($line =~/^\Q$domaininsert\E$/) {
1.27 albertel 1135: $lineexistflag=1;
1136: }
1.52 albertel 1137: if ($line =~/^\Q$perlvar{'lonDefDomain'}\E\:/) {
1.27 albertel 1138: $domainexistflag=1;
1139: }
1140: }
1141: close(IN);
1142: if ($domainexistflag and !$lineexistflag) {
1143: print <<END;
1144: WARNING: $perlvar{'lonDefDomain'} already exists inside
1.52 albertel 1145: loncapa/loncom/${lonCluster}_dns_domain.tab. The entry inside
1146: ${lonCluster}_dns_domain.tab does not match your settings.
1147: An entry will be made in inside ${lonCluster}_domain.tab
1.27 albertel 1148: with your new values.
1149: END
1150: `grep -v "$perlvar{'lonDefDomain'}:" ../${lonCluster}_domain.tab > ../new_${lonCluster}_domain.tab`;
1151: open(OUT,'>>../new_'.$lonCluster.'_domain.tab') or
1152: die("cannot open loncom/${lonCluster}_domain.tab for output\n");
1153: print(OUT $domaininsert);
1154: close(OUT);
1155: `ln -s new_${lonCluster}_domain.tab ../domain.tab`;
1156: # email appropriate message
1.34 albertel 1157: `echo "REPLACEdom:$lonCluster:$lonHostID:$date:$domaninsert" | mail -s "REPLACEdom:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
1.27 albertel 1158: }
1159: elsif ($domainexistflag and $lineexistflag) {
1.52 albertel 1160: `grep -v "$perlvar{'lonDefDomain'}:" ../${lonCluster}_domain.tab > ../new_${lonCluster}_domain.tab`;
1161: open(OUT,'>>../new_'.$lonCluster.'_domain.tab') or
1162: die("cannot open loncom/${lonCluster}_domain.tab for output\n");
1163: print(OUT $domaininsert);
1164: close(OUT);
1.27 albertel 1165: print <<END;
1.52 albertel 1166: Entry exists in ${lonCluster}_dns_domain.tab. Making duplicate entry in ${lonCluster}_domain.tab
1.27 albertel 1167: END
1.52 albertel 1168: `ln -s new_${lonCluster}_domain.tab ../domain.tab`;
1.27 albertel 1169: # email appropriate message
1170: `echo "STABLEUPDATEdom:$lonCluster:$lonHostID:$date:$domaininsert" | mail -s "STABLEUPDATEdom:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
1171: }
1172: elsif (!$domainexistflag and !$lineexistflag) {
1173: print <<END;
1174: New entry for $lonCluster.
1175: END
1176: `cat ../${lonCluster}_domain.tab > ../new_${lonCluster}_domain.tab`;
1177: open(OUT,'>>../new_'.$lonCluster.'_domain.tab') or
1178: die("cannot open loncom/new_${lonCluster}_domain.tab for output\n");
1179: print(OUT $domaininsert);
1180: close(OUT);
1181: `ln -s new_${lonCluster}_domain.tab ../domain.tab`;
1182: # email appropriate message
1183: `echo "INSERTdom:$lonCluster:$lonHostID:$date:$domaininsert" | mail -s "INSERTdom:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
1.6 harris41 1184: }
1185: }
1.1 harris41 1186: }
1187: </perlscript>
1188: </file>
1189: </files>
1190: </piml>
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/back.gif){kind=icon}
Return to updatequery.piml CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [LON-CAPA] / doc / loncapafiles