<!-- updatequery.piml -->
<!-- $Id: updatequery.piml,v 1.98 2024/07/06 16:00:22 raeburn Exp $ -->
<!--
This file is part of the LearningOnline Network with CAPA (LON-CAPA).
LON-CAPA is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
LON-CAPA is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with LON-CAPA; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
/home/httpd/html/adm/gpl.txt
http://www.lon-capa.org/
-->
<piml>
<targetroot>/</targetroot>
<files>
<file>
<target dist='default'>/</target>
<perlscript mode='fg'>
$|=1;
use strict;
use lib '/home/httpd/lib/perl/';
use LONCAPA::Configuration;
use LONCAPA::Lond;
use LONCAPA::SSL;
use LONCAPA;
use GDBM_File;
use Storable qw(thaw);
use Term::ReadKey;
use Locale::Country;
sub get_new_sslkeypass {
my $sslkeypass;
my $flag=0;
# get Password for SSL key
while (!$flag) {
$sslkeypass = &make_passphrase();
if ($sslkeypass) {
$flag = 1;
} else {
print "Invalid input (a password is required for the SSL key).\n";
}
}
return $sslkeypass;
}
sub get_static_config {
# get LCperlvars from loncapa_apache.conf
my $confdir = '/etc/httpd/conf/';
if ('<DIST />' eq 'sles10' || '<DIST />' eq 'sles11' || '<DIST />' eq 'sles12' || '<DIST />' eq 'sles15' || '<DIST />' eq 'suse10.1' || '<DIST />' eq 'suse10.2' || '<DIST />' eq 'suse10.3' || '<DIST />' eq 'suse11.1' || '<DIST />' eq 'suse11.2' || '<DIST />' eq 'suse11.3' || '<DIST />' eq 'suse11.4' || '<DIST />' eq 'suse12.1' || '<DIST />' eq 'suse12.2' || '<DIST />' eq 'suse12.3' || '<DIST />' eq 'suse13.1' || '<DIST />' eq 'suse13.2' || '<DIST />' eq 'debian5' || '<DIST />' eq 'debian6' || '<DIST />' eq 'ubuntu6' || '<DIST />' eq 'ubuntu8' || '<DIST />' eq 'ubuntu10' || '<DIST />' eq 'ubuntu12' || '<DIST />' eq 'ubuntu14' || '<DIST />' eq 'ubuntu16' || '<DIST />' eq 'ubuntu18' || '<DIST />' eq 'ubuntu20' || '<DIST />' eq 'ubuntu22' || '<DIST />' eq 'ubuntu24' || '<DIST />' eq 'debian10' || '<DIST />' eq 'debian11' || '<DIST />' eq 'debian12') {
$confdir = '/etc/apache2/';
}
my $filename='loncapa_apache.conf';
my %LCperlvar;
if (-e "$confdir$filename") {
open(CONFIG,'<'.$confdir.$filename) or die("Can't read $confdir$filename");
while (my $configline=<CONFIG>) {
if ($configline =~ /^[^\#]?PerlSetVar/) {
my ($unused,$varname,$varvalue)=split(/\s+/,$configline);
chomp($varvalue);
$LCperlvar{$varname}=$varvalue;
}
}
close(CONFIG);
}
return \%LCperlvar;
}
sub get_domain_config {
my ($dom,$primaryserver,$isprimary,$url,$perlvarref) = @_;
my %confhash;
if ($isprimary) {
if (ref($perlvarref) eq 'HASH') {
my $lonusersdir = $perlvarref->{'lonUsersDir'};
my $fname = $lonusersdir.'/'.$dom.'/configuration.db';
if (-e $fname) {
my $dbref=&LONCAPA::locking_hash_tie($fname,&GDBM_READER());
if (ref($dbref) eq 'HASH') {
foreach my $key (sort(keys(%{$dbref}))) {
my $value = $dbref->{$key};
if ($value =~ s/^__FROZEN__//) {
$value = thaw(&LONCAPA::unescape($value));
} else {
$value = &LONCAPA::unescape($value);
}
$confhash{$key} = $value;
}
&LONCAPA::locking_hash_untie($dbref);
}
}
}
} else {
if (open(PIPE,"wget --no-check-certificate '$url?primary=$primaryserver&format=raw' |")) {
my $config = '';
while (<PIPE>) {
$config .= $_;
}
close(PIPE);
if ($config) {
my @pairs=split(/\&/,$config);
foreach my $item (@pairs) {
my ($key,$value)=split(/=/,$item,2);
my $what = &LONCAPA::unescape($key);
if ($value =~ s/^__FROZEN__//) {
$value = thaw(&LONCAPA::unescape($value));
} else {
$value = &LONCAPA::unescape($value);
}
$confhash{$what}=$value;
}
}
}
}
return (\%confhash);
}
sub make_passphrase {
my ($got_passwd,$firstpass,$secondpass,$passwd);
my $maxtries = 10;
my $trial = 0;
while ((!$got_passwd) && ($trial < $maxtries)) {
$firstpass = &get_password('Enter a password for the SSL key (at least 6 characters long)');
if (length($firstpass) < 6) {
print('Password too short.'."\n".
'Please choose a password with at least six characters.'."\n".
'Please try again.'."\n");
} elsif (length($firstpass) > 30) {
print('Password too long.'."\n".
'Please choose a password with no more than thirty characters.'."\n".
'Please try again.'."\n");
} else {
my $pbad=0;
foreach (split(//,$firstpass)) {if ((ord($_)<32)||(ord($_)>126)){$pbad=1;}}
if ($pbad) {
print('Password contains invalid characters.'."\n".
'Password must consist of standard ASCII characters.'."\n".
'Please try again.'."\n");
} else {
$secondpass = &get_password('Enter password a second time');
if ($firstpass eq $secondpass) {
$got_passwd = 1;
$passwd = $firstpass;
} else {
print('Passwords did not match.'."\n".
'Please try again.'."\n");
}
}
}
$trial ++;
}
return $passwd;
}
sub get_password {
my ($prompt) = @_;
local $| = 1;
print $prompt.': ';
my $newpasswd = '';
ReadMode 'raw';
my $key;
while(ord($key = ReadKey(0)) != 10) {
if(ord($key) == 127 || ord($key) == 8) {
chop($newpasswd);
print "\b \b";
} elsif(!ord($key) < 32) {
$newpasswd .= $key;
print '*';
}
}
ReadMode 'normal';
print "\n";
return $newpasswd;
}
sub send_mail {
my ($hostname,$recipient,$subj,$file) = @_;
my $from = 'www@'.$hostname;
my $certmail = "To: $recipient\n".
"From: $from\n".
"Subject: ".$subj."\n".
"Content-type: text/plain\; charset=UTF-8\n".
"MIME-Version: 1.0\n\n";
if (open(my $fh,"<$file")) {
while (<$fh>) {
$certmail .= $_;
}
close($fh);
$certmail .= "\n\n";
if (open(my $mailh, "|/usr/lib/sendmail -oi -t -odb")) {
print $mailh $certmail;
close($mailh);
print "Mail sent ($subj) to $recipient\n";
} else {
print "Sending mail ($subj) to $recipient failed.\n";
}
}
return;
}
sub mail_csr {
my ($types,$lonCluster,$lonHostID,$desiredhostname,$certsdir,$connectcsr,$replicatecsr,$perlvarref) = @_;
my ($camail,$flag);
if ($lonCluster eq 'production' || $lonCluster eq 'development') {
$camail = $perlvarref->{'SSLEmail'};
} else {
$flag=0;
# get Certificate Authority E-mail
while (!$flag) {
print(<<END);
ENTER EMAIL ADDRESS TO SEND CERTIFICATE SIGNING REQUESTS
END
my $choice=<>;
chomp($choice);
if ($choice ne '') {
open(OUT,'>>/tmp/loncapa_updatequery.out');
print(OUT 'Certificate Authority Email Address'."\t".$choice."\n");
close(OUT);
$camail=$choice;
$flag=1;
} else {
print "Invalid input (an email address is required).\n";
}
}
}
if ($camail) {
my $subj;
if (($types eq 'both') || ($types = 'host')) {
if (-e "$certsdir/$connectcsr") {
$subj = "Certificate Request ($lonHostID)";
print(&send_mail($desiredhostname,$camail,$subj,"$certsdir/$connectcsr"));
}
}
if (($types eq 'both') || ($types = 'hostname')) {
if (-e "$certsdir/$replicatecsr") {
$subj = "Certificate Request (internal-$desiredhostname)";
print(&send_mail($desiredhostname,$camail,$subj,"$certsdir/$replicatecsr"));
}
}
}
}
sub ssl_info {
print(<<END);
****** Information about Country, State or Province and City *****
A two-letter country code, e.g., US, CA, DE etc. as defined by ISO 3166,
is required. A state or province, and a city are also required.
This locality information is included in two SSL certificates used internally
by LON-CAPA, unless you are running standalone.
If your server will be part of either the production or development
clusters, then the certificate will need to be signed by the official
LON-CAPA Certificate Authority (CA). If you will be running your own
cluster then the cluster will need to create its own CA.
END
}
sub get_country {
my ($desiredhostname) = @_;
# get Country
my ($posscountry,$country);
if ($desiredhostname =~ /\.(edu|com|org)$/) {
$posscountry = 'us';
} else {
($posscountry) = ($desiredhostname =~ /\.(a-z){2}$/);
}
if ($posscountry) {
my $countrydesc = &Locale::Country::code2country($posscountry);
if ($countrydesc eq '') {
undef($posscountry);
}
}
my $flag=0;
while (!$flag) {
if ($posscountry) {
$posscountry = uc($posscountry);
print "ENTER TWO-LETTER COUNTRY CODE [$posscountry]:\n";
} else {
print "ENTER TWO-LETTER COUNTRY CODE:\n";
}
my $choice=<>;
chomp($choice);
if ($choice ne '') {
if (&Locale::Country::code2country(lc($choice))) {
open(OUT,'>>/tmp/loncapa_updatequery.out');
print(OUT 'country'."\t".uc($choice)."\n");
close(OUT);
$country=uc($choice);
$flag=1;
} else {
print "Invalid input -- a valid two letter country code is required\n";
}
} elsif (($choice eq '') && ($posscountry ne '')) {
open(OUT,'>>/tmp/loncapa_updatequery.out');
print(OUT 'country'."\t".$posscountry."\n");
close(OUT);
$country = $posscountry;
$flag = 1;
} else {
print "Invalid input -- a country code is required\n";
}
}
return $country;
}
sub get_state {
# get State or Province
my $flag=0;
my $state = '';
while (!$flag) {
print(<<END);
ENTER STATE OR PROVINCE NAME:
END
my $choice=<>;
chomp($choice);
if ($choice ne '') {
open(OUT,'>>/tmp/loncapa_updatequery.out');
print(OUT 'state'."\t".$choice."\n");
close(OUT);
$state=$choice;
$flag=1;
} else {
print "Invalid input (a state or province name is required).\n";
}
}
return $state;
}
sub get_city {
# get City
my $flag=0;
my $city = '';
while (!$flag) {
print(<<END);
ENTER CITY NAME:
END
my $choice=<>;
chomp($choice);
if ($choice ne '') {
open(OUT,'>>/tmp/loncapa_updatequery.out');
print(OUT 'city'."\t".$choice."\n");
close(OUT);
$city=$choice;
$flag=1;
} else {
print "Invalid input (a city is required).\n";
}
}
return $city;
}
sub confirm_locality {
my ($domainDescription,$country,$state,$city) = @_;
my $flag = 0;
while (!$flag) {
print(<<END);
The domain description, country, state and city will be
used in the SSL certificates
1) Domain Description: $domainDescription
2) Country: $country
3) State or Province: $state
4) City: $city
5) Everything is correct up above
ENTER A CHOICE OF 1-4 TO CHANGE, otherwise ENTER 5:
END
my $choice=<>;
chomp($choice);
if ($choice == 1) {
print(<<END);
1) Domain Description: $domainDescription
ENTER NEW VALUE
END
my $choice2=<>;
chomp($choice2);
$domainDescription=$choice2;
} elsif ($choice == 2) {
print(<<END);
2) Country: $country
ENTER NEW VALUE (this should be a two-character code, e,g, US, CA, DE)
END
my $choice2=<>;
chomp($choice2);
$country = uc($choice2);
} elsif ($choice == 3) {
print(<<END);
3) State or Province: $state
ENTER NEW VALUE:
END
my $choice2=<>;
chomp($choice2);
$state=$choice2;
} elsif ($choice == 4) {
print(<<END);
4) City: $city
ENTER NEW VALUE:
END
my $choice2=<>;
chomp($choice2);
$city=$choice2;
} elsif ($choice == 5) {
$flag=1;
$state =~ s{/}{ }g;
$city =~ s{/}{ }g;
$domainDescription =~ s{/}{ }g;
} else {
print "Invalid input.\n";
}
}
return ($domainDescription,$country,$state,$city);
}
sub make_key {
my ($certsdir,$privkey,$sslkeypass) = @_;
# generate SSL key
if ($certsdir && $privkey) {
if (-f "$certsdir/lonKey.enc") {
my $mode = 0600;
chmod $mode, "$certsdir/lonKey.enc";
}
open(PIPE,"openssl genrsa -des3 -passout pass:$sslkeypass -out $certsdir/lonKey.enc 2048 2>&1 |");
close(PIPE);
if (-f "$certsdir/$privkey") {
my $mode = 0600;
chmod $mode, "$certsdir/$privkey";
}
open(PIPE,"openssl rsa -in $certsdir/lonKey.enc -passin pass:$sslkeypass -out $certsdir/$privkey -outform PEM |");
close(PIPE);
if (-f "$certsdir/lonKey.enc") {
my $mode = 0400;
chmod $mode, "$certsdir/lonKey.enc";
}
if (-f "$certsdir/$privkey") {
my $mode = 0400;
chmod $mode, "$certsdir/$privkey";
}
} else {
print "Key creation failed. Missing one or more of: certificates directory, key name\n";
}
}
sub encrypt_key {
my ($certsdir,$privkey,$sslkeypass) = @_;
if ($certsdir && $privkey) {
if ((-f "$certsdir/$privkey") && (!-f "$certsdir/lonKey.enc")) {
open(PIPE,"openssl rsa -des3 -in $certsdir/$privkey -out $certsdir/lonKey.enc |");
}
}
return;
}
sub make_host_csr {
my ($certsdir,$sslkeypass,$connectcsr,$connectsubj) = @_;
# generate SSL csr for hostID
if ($certsdir && $connectcsr && $connectsubj) {
open(PIPE,"openssl req -key $certsdir/lonKey.enc -passin pass:$sslkeypass -new -batch -subj \"$connectsubj\" -out $certsdir/$connectcsr |");
close(PIPE);
} else {
print "Creation of certificate signing request failed. Missing one or more of: certificates directory, CSR name, or locality information.\n";
}
}
sub make_hostname_csr {
my ($certsdir,$sslkeypass,$replicatecsr,$replicatesubj) = @_;
# generate SSL csr for internal hostname
if ($certsdir && $replicatecsr && $replicatesubj) {
open(PIPE,"openssl req -key $certsdir/lonKey.enc -passin pass:$sslkeypass -new -batch -subj \"$replicatesubj\" -out $certsdir/$replicatecsr |");
close(PIPE);
} else {
print "Creation of certificate signing request failed. Missing one or more of: certificates directory, CSR name, or locality information.\n";
}
}
sub securesetting {
my (%perlvar) = @_;
my ($securestatus,$securenum);
if (($perlvar{'loncAllowInsecure'}) && ($perlvar{'londAllowInsecure'})) {
$securenum = 4;
$securestatus = 'Allow insecure connections - inbound and outbound';
} elsif (($perlvar{'loncAllowInsecure'}) && (!$perlvar{'londAllowInsecure'})) {
$securenum = 3;
$securestatus = 'Outbound: allow insecure connections; Inbound: secure only';
} elsif ((!$perlvar{'loncAllowInsecure'}) && ($perlvar{'londAllowInsecure'})) {
$securenum = 2;
$securestatus = 'Outbound: secure connections only; Inbound: allow insecure';
} elsif ((!$perlvar{'loncAllowInsecure'}) && (!$perlvar{'londAllowInsecure'})) {
$securenum = 1;
$securestatus = 'Secure connections only - inbound and outbound ';
}
return ($securestatus,$securenum);
}
sub get_sslnames {
my %sslnames = (
key => 'lonnetPrivateKey',
host => 'lonnetCertificate',
hostname => 'lonnetHostnameCertificate',
ca => 'lonnetCertificateAuthority',
);
return %sslnames;
}
sub get_ssldesc {
my %ssldesc = (
key => 'Private Key',
host => 'Connections Certificate',
hostname => 'Replication Certificate',
ca => 'LON-CAPA CA Certificate',
);
return %ssldesc;
}
sub get_cert_status {
my ($lonHostID,$hostname,$perlvarstatic) = @_;
my $currcerts = &LONCAPA::SSL::print_certstatus({$lonHostID => $hostname,},'text','install');
my ($lonkeystatus,$lonhostcertstatus,$lonhostnamecertstatus,%sslstatus);
my $output = '';
if ($currcerts eq "$lonHostID:error") {
$output .= "No information available for SSL certificates\n";
$sslstatus{'key'} = -1;
$sslstatus{'host'} = -1;
$sslstatus{'hostname'} = -1;
$sslstatus{'ca'} = -1;
$lonkeystatus = 'unknown status';
$lonhostcertstatus = 'unknown status';
$lonhostnamecertstatus = 'unknown status';
} else {
my %sslnames = &get_sslnames();
my %ssldesc = &get_ssldesc();
my %csr;
my ($lonhost,$info) = split(/\:/,$currcerts,2);
if ($lonhost eq $lonHostID) {
my @items = split(/\&/,$info);
foreach my $item (@items) {
my ($key,$value) = split(/=/,$item,2);
if ($key =~ /^(host(?:|name))\-csr$/) {
$csr{$1} = $value;
}
my @data = split(/,/,$value);
if (grep(/^\Q$key\E$/,keys(%sslnames))) {
my ($checkcsr,$comparecsr);
if (lc($data[0]) eq 'yes') {
$output .= "$ssldesc{$key} ".$perlvarstatic->{$sslnames{$key}}." available with status = $data[1]\n";
if ($key eq 'key') {
$lonkeystatus = "status: $data[1]";
if ($data[1] =~ /ok$/) {
$sslstatus{$key} = 1;
}
} else {
my $setstatus;
if (($key eq 'host') || ($key eq 'hostname')) {
if ($data[1] eq 'otherkey') {
$sslstatus{$key} = 4;
$setstatus = 1;
if ($key eq 'host') {
$lonhostcertstatus = "status: created with different key";
} elsif ($key eq 'hostname') {
$lonhostnamecertstatus = "status: created with different key";
}
} elsif ($data[1] eq 'nokey') {
$sslstatus{$key} = 5;
$setstatus = 1;
if ($key eq 'host') {
$lonhostcertstatus = "status: created with missing key";
} elsif ($key eq 'hostname') {
$lonhostnamecertstatus = "status: created with missing key";
}
}
if ($setstatus) {
$comparecsr = 1;
}
}
unless ($setstatus) {
if ($data[1] eq 'expired') {
$sslstatus{$key} = 2;
} elsif ($data[1] eq 'future') {
$sslstatus{$key} = 3;
} else {
$sslstatus{$key} = 1;
}
if ($key eq 'host') {
$lonhostcertstatus = "status: $data[1]";
} elsif ($key eq 'hostname') {
$lonhostnamecertstatus = "status: $data[1]";
}
}
}
} else {
$sslstatus{$key} = 0;
$output .= "$ssldesc{$key} ".$perlvarstatic->{$sslnames{$key}}." not available\n";
if ($key eq 'key') {
$lonkeystatus = 'still needed';
} elsif (($key eq 'host') || ($key eq 'hostname')) {
$checkcsr = 1;
}
}
if (($checkcsr) || ($comparecsr)) {
my $csrfile = $perlvarstatic->{$sslnames{$key}};
$csrfile =~s /\.pem$/.csr/;
my $csrstatus;
if (-e $perlvarstatic->{'lonCertificateDirectory'}."/$csrfile") {
open(PIPE,"openssl req -text -noout -verify -in ".$perlvarstatic->{'lonCertificateDirectory'}."/$csrfile 2>&1 |");
while(<PIPE>) {
chomp();
$csrstatus = $_;
last;
}
close(PIPE);
if ((($comparecsr) && ($csr{$key})) || ($checkcsr)) {
$output .= "Certificate signing request for $ssldesc{$key} available with status = $csrstatus\n\n";
if ($key eq 'host') {
$lonhostcertstatus = 'awaiting signature';
} else {
$lonhostnamecertstatus = 'awaiting signature';
}
$sslstatus{$key} = 3;
}
} elsif ($checkcsr) {
$output .= "No certificate signing request available for $ssldesc{$key}\n\n";
if ($key eq 'host') {
$lonhostcertstatus = 'still needed';
} else {
$lonhostnamecertstatus = 'still needed';
}
}
}
}
}
}
}
return ($output,$lonkeystatus,$lonhostcertstatus,$lonhostnamecertstatus,\%sslstatus);
}
print(<<END);
*********************************************
*********************************************
**** ****
**** LON-CAPA SYSTEM INFORMATION REQUEST ****
**** ****
**** Please respond to the choices below ****
**** ****
*********************************************
*********************************************
END
#sleep(3);
</perlscript>
</file>
<file>
<target dist='default'>../../loncom/hosts.tab</target>
<perlscript mode='fg'>
my $lonCluster;
my $currCluster;
if (-l "<TARGET />") {
my $currlink = readlink("<TARGET />");
if ($currlink =~ /^new_(existing|standalone|development|production)_hosts\.tab$/) {
$currCluster = $1;
}
my %clustertypes = (
production => 'PRODUCTION',
standalone => 'STAND-ALONE',
development => 'DEVELOPMENT',
existing => 'RUNNING YOUR OWN CLUSTER',
);
if (($currCluster) && (exists($clustertypes{$currCluster}))) {
print(<<END);
The cluster type for this server is currently: $clustertypes{$currCluster}
END
}
}
print(<<END);
===============================================================================
Which cluster option would you like to have installed?
IMPORTANT: to take advantage of the cluster options 1) and 3),
you must contact loncapa\@loncapa.org.
1) PRODUCTION - you want to eventually connect this machine to the
LON-CAPA content sharing network. This setting is for
schools, colleges, and universities, that currently
are running - or in the future will run - courses.
2) STAND-ALONE - you want this machine to run in 'stand-alone' mode and
not be connected to other LON-CAPA machines for now.
3) DEVELOPMENT - you want to do software (not content!) development with
this workstation and eventually link it with the
workstations of other LON-CAPA software developers.
4) RUNNING YOUR OWN CLUSTER - this machine is not in the standard LON-CAPA
clusters and won't be in the future and you want the existing
hosts.tab and domain.tab files to be left alone.
(This choice is unlikely what you want to select.)
END
# Option number 26 will install rawhide_hosts.tab, but
# the typical user does not want to be part of an intensive
# machine test cluster.
# get input
# if valid then process, otherwise loop
my $flag=0;
while (!$flag) {
print "ENTER 1, 2, 3, or 4:\n";
my $choice=<>;
chomp($choice);
if ($choice==1) {
$lonCluster='production'; $flag=1;
}
elsif ($choice==2) {
$lonCluster='standalone'; $flag=1;
}
elsif ($choice==3) {
$lonCluster='development'; $flag=1;
}
elsif ($choice==4) {
$lonCluster='existing'; $flag=1;
foreach my $file ('hosts.tab','dns_hosts.tab',
'domain.tab','dns_domain.tab') {
if (-e '/home/httpd/lonTabs/'.$file) {
`cp /home/httpd/lonTabs/$file ../existing_$file`;
}
else {
print <<END;
There is no existing /home/httpd/lonTabs/$file
END
die('');
}
}
}
elsif ($choice==26) {
$lonCluster='rawhide'; $flag=1;
}
}
</perlscript>
</file>
<file>
<target dist='default'>/home/httpd/lonTabs/hosts.tab</target>
<perlscript mode='fg'>
$|=1;
my $domainDescription;
my $domainTabExtras;
my $primaryLibServer;
my $protocol;
my $intdom;
my $desiredhostname;
my $city;
my $state;
my $country;
my @libservers = ();
unless (-e "<TARGET />") {
print(<<END);
WELCOME TO LON-CAPA!
If you have questions, please visit http://install.loncapa.org
or contact helpdesk\@loncapa.org.
===============================================================================
The following 10 values are needed to configure LON-CAPA:
* Machine Role
* LON-CAPA Domain Name
* LON-CAPA Machine ID Name
* Server Administration E-mail Address
* LON-CAPA Domain's Primary Library Server Machine ID
* Web Server Protocol
* Internet Domain Name of Your Institution
* Hostname
* City, State, Country for LON-CAPA SSL certificate
* Password for key for creating SSL certificates
===============================================================================
In addition, a Support E-mail Address can also be included. If
an address is included then one of the options in the LON-CAPA
help menu will be a link to a form that a user will complete to
request LON-CAPA help.
END
open(OUT,'>/tmp/loncapa_updatequery.out');
close(OUT);
# query for Machine Role
print(<<END);
**** Machine Role ****
Library server (recommended if first-time installation of LON-CAPA):
Servers that are repositories of authoritative educational resources.
These servers also provide the authoring spaces in which content
creators (e.g., faculty instructors) create their learning content.
Access server:
Servers that load-balance high-traffic delivery of educational resources
over the world-wide web.
1) Will this be a library server? (recommended if this is your first install)
2) Or, will this be an access server?
END
my $flag=0;
my $r='';
my $lonRole;
while (!$flag) {
print "ENTER A CHOICE OF 1 or 2:\n";
my $choice=<>;
chomp($choice);
if ($choice==1) {
open(OUT,'>>/tmp/loncapa_updatequery.out');
print(OUT 'lonRole'."\t".'library'."\n");
close(OUT);
$lonRole='library';
$r='l';
$flag=1;
}
elsif ($choice==2) {
open(OUT,'>>/tmp/loncapa_updatequery.out');
print(OUT 'lonRole'."\t".'access'."\n");
close(OUT);
$lonRole='access';
$r='a';
$flag=2;
}
else {
}
}
# need to recommend a machine ID name (ipdomain.l.somenumber)
my $hostname=`hostname -f`; chomp($hostname);
my $ipdomain='';
if ($hostname=~/([^\.]*)\.([^\.]*)$/) {
$ipdomain=$1;
}
print(<<END);
**** Domain ****
[This does NOT need to correspond to an internet address domain.
Please make this name short AND descriptive of your organization.
Domain names are close to impossible to change later!!!
Good examples might be "msu" or "bionet" or "vermontcc".
Bad examples are "physics" (too general)
or "michiganstateuniversity" (too long)
or "msuedu" (just make it "msu", or else make it msu.edu)
or "msuphysics" (only if there is a good reason to limit to department
- we don't know of one)
or "mydomain" (what is that?)
Avoid multiple domains at the same institution, even if it means that you
have to actually work together with your colleagues. You can still run
multiple library servers within the same domain.
If this domain is eventually going to be part of the main production
cluster, you MUST contact the LON-CAPA group at MSU (loncapa\@loncapa.org)
to have a domain name assigned, and then use it exactly as given. This is
also true for test installs that might eventually turn into production setups.
The short domain name needs to be unique, if your aim is to join a cluster
containing existing domains. Stop now if you have not yet contacted the
MSU LON-CAPA group.]
END
# get domain name
# accept if valid, if not valid, tell user and repeat
$flag=0;
my $lonDefDomain;
while (!$flag) {
if ($ipdomain) {
print(<<END);
ENTER LONCAPA DOMAIN [$ipdomain]:
END
}
else {
print(<<END);
ENTER LONCAPA DOMAIN:
END
}
my $choice=<>;
chomp($choice);
my $bad_domain_flag=0;
my @bad_domain_names=('res','raw','userfiles','priv','adm','uploaded',
'editupload');
foreach my $bad (@bad_domain_names) {
$bad_domain_flag=1 if $choice eq $bad;
}
if ($choice=~/capa/i) {
$bad_domain_flag=1;
}
if ($ipdomain and $choice=~/^\s*$/) {
$choice=$ipdomain;
open(OUT,'>>/tmp/loncapa_updatequery.out');
print(OUT 'lonDefDomain'."\t".$choice."\n");
close(OUT);
$lonDefDomain=$choice;
$flag=1;
} elsif (length($choice)>35) {
print "Name too long\n";
} elsif (length($choice)<2) {
print "Name too short\n";
} elsif ($bad_domain_flag) {
print "Invalid input ('$choice' conflicts with LON-CAPA namespace).\n";
print "Please try something different than '$choice'\n";
} elsif ($choice!~/\_/ and $choice=~/^[\w\-.]+$/) {
open(OUT,'>>/tmp/loncapa_updatequery.out');
print(OUT 'lonDefDomain'."\t".$choice."\n");
close(OUT);
$lonDefDomain=$choice;
$r='l';
$flag=1;
} else {
print "Invalid input (only alphanumeric characters, '-', and '.' supported).\n";
}
}
# get domain description
# accept if valid, if not valid, tell user and repeat
$flag=0;
while (!$flag) {
print(<<END);
**** Domain Description ****
String describing the domain, to be shown to users.
[Example, msu is Michigan State University]
ENTER DOMAIN DESCRIPTION:
END
my $choice=<>;
chomp($choice);
if ($choice!~/:/) {
open(OUT,'>>/tmp/loncapa_updatequery.out');
print(OUT 'domainDescription'."\t".$choice."\n");
close(OUT);
$domainDescription=$choice;
$flag=1;
}
else {
print "Invalid input (no ':' allowed).\n";
}
}
my $lonHostID;
if ($lonDefDomain) {
$lonHostID=$lonDefDomain.$r.int(1+rand(9)); # should be probably also detect
# against the hosts.tab
}
print(<<END);
**** Machine ID Name ****
[This does NOT need to correspond to internet address names;
this name MUST be unique to the whole LON-CAPA network;
we recommend that you use a name based off of your institution.
Good examples: "msul1" or "bioneta2".
Bad examples: "loncapabox" or "studentsinside".
Note that machine names are very hard to change later.]
END
# get machine name
# accept if valid, if not valid, tell user and repeat
$flag=0;
while (!$flag) {
if ($ipdomain) {
print(<<END);
ENTER LONCAPA MACHINE ID [$lonHostID]:
END
}
else {
print(<<END);
ENTER LONCAPA MACHINE ID:
END
}
my $choice=<>;
chomp($choice);
if ($choice=~/capa/i) {
print "Invalid input (names containing 'capa' are reserved).\n";
} elsif ($lonHostID and $choice=~/^\s*$/) {
$choice=$lonHostID;
open(OUT,'>>/tmp/loncapa_updatequery.out');
print(OUT 'lonHostID'."\t".$choice."\n");
close(OUT);
$lonHostID=$choice;
$flag=1;
} elsif (length($choice)>45) {
print "Name too long\n";
} elsif (length($choice)<4) {
print "Name too short\n";
} elsif ($choice!~/\_/ and $choice=~/^[\w\-.]+$/) {
open(OUT,'>>/tmp/loncapa_updatequery.out');
print(OUT 'lonHostID'."\t".$choice."\n");
close(OUT);
$lonHostID=$choice;
$flag=1;
} else {
print "Invalid input (only alphanumeric characters, '-', and '.' supported).\n";
}
}
# get primary library server in domain
if ($lonRole eq 'library') {
if (!grep/^\Q$lonHostID\E$/,@libservers) {
push(@libservers,$lonHostID);
}
if (@libservers == 1) {
$primaryLibServer = $libservers[0];
}
}
$flag=0;
while (!$flag) {
print(<<END);
**** Domain's Primary Library Server ID ****
This should be the LON-CAPA machine ID of a library server in your
domain. If you only have a single library server in your domain, then
the Primary Library server ID will be the machine ID of that server.
This server will be where domain data which are not associated with any
specific home library server will be stored (e.g., configurations that
apply to all nodes in the domain).
END
if (defined($primaryLibServer)) {
print(<<END);
ENTER DOMAIN'S PRIMARY LIBRARY SERVER ID [$primaryLibServer]:
END
} elsif (@libservers > 0) {
print(<<END);
ENTER DOMAIN'S PRIMARY LIBRARY SERVER ID [$libservers[0]]
END
} else {
print (<<END);
No library servers could be identified for this domain. If you have already installed LON-CAPA on a different server (designated as a library server) in this domain, please enter the LONCAPA MACHINE ID of that server. If not, you will need to install a LON-CAPA library server. Enter the MACHINE ID of the server you plan to designate as a library server.
END
}
my $choice=<>;
chomp($choice);
if ($primaryLibServer and $choice=~/^\s*$/) {
$choice=$primaryLibServer;
open(OUT,'>>/tmp/loncapa_updatequery.out');
print(OUT 'primaryLibServer'."\t".$choice."\n");
close(OUT);
$flag=1;
} elsif (length($choice)>35) {
print "Name too long\n";
} elsif (length($choice)<4) {
print "Name too short\n";
} elsif ($choice!~/\_/ and $choice=~/^[\w\-.]+$/) {
open(OUT,'>>/tmp/loncapa_updatequery.out');
print(OUT 'primaryLibServer'."\t".$choice."\n");
close(OUT);
$primaryLibServer=$choice;
$flag=1;
} else {
print "Invalid input (only alphanumeric characters, '-', and '.' supported).\n";
}
}
# get admin e-mail address
# accept if valid, if not valid, tell user and repeat
$flag=0;
my $lonAdmEMail;
while (!$flag) {
print(<<END);
**** Server Administrator's E-mail ****
E-mail address of the person who will manage this machine
[should be in the form somebody\@somewhere]
ENTER ADMIN E-MAIL ADDRESS:
END
my $choice=<>;
chomp($choice);
if ($choice=~/\@/) {
open(OUT,'>>/tmp/loncapa_updatequery.out');
print(OUT 'lonAdmEMail'."\t".$choice."\n");
close(OUT);
$lonAdmEMail=$choice;
$flag=1;
}
else {
print "Invalid input (this needs to look like an e-mail address!).\n";
}
}
# get support e-mail address
# accept if valid, if not valid, tell user and repeat
$flag=0;
my $lonSupportEMail;
while (!$flag) {
print(<<END);
**** Support E-mail ****
E-mail address of the person who will receive
help requests from LON-CAPA users who access
the system via this server. If the address is left blank,
then a help support form will not be displayed
as part of the help menu.
[should be in the form somebody\@somewhere]
ENTER SUPPORT E-MAIL ADDRESS:
END
my $choice=<>;
chomp($choice);
$choice =~ s/\s//g;
if ( ($choice=~/\@/) || $choice eq '') {
open(OUT,'>>/tmp/loncapa_updatequery.out');
print(OUT 'lonSupportEMail'."\t".$choice."\n");
close(OUT);
$lonSupportEMail=$choice;
$flag=1;
}
else {
print "Invalid input (this either needs to be blank, or look like an e-mail address!).\n";
}
}
# get protocol
# accept if valid, if not valid, tell user and repeat
$flag=0;
while (!$flag) {
print(<<END);
**** Web Server Protocol ****
If you plan to run the Apache server with SSL enabled,
the protocol should be: https; otherwise it should be http.
ENTER WEB SERVER PROTOCOL [http]:
END
my $choice=<>;
chomp($choice);
if ($choice =~ /^https?$/) {
open(OUT,'>>/tmp/loncapa_updatequery.out');
print(OUT 'protocol'."\t".$choice."\n");
close(OUT);
$protocol=$choice;
$flag=1;
} elsif ($choice eq '') {
open(OUT,'>>/tmp/loncapa_updatequery.out');
print(OUT 'protocol'."\t".'http'."\n");
close(OUT);
$protocol = 'http';
$flag = 1;
} else {
print "Invalid input (only http or https allowed).\n";
}
}
# get internet domain
# accept if valid, if not valid, tell user and repeat
$flag=0;
while (!$flag) {
print(<<END);
**** Internet Domain Name of Your Institution ****
The internet domain name used for servers at your institution
should be provided. This will be similar to: ustate.edu or
topcollege.ac.uk or myhostingcompany.com, i.e., the part of
a server hostname which indicates to which organization the
server belongs.
ENTER INTERNET DOMAIN NAME:
END
my $choice=<>;
chomp($choice);
if ($choice =~/[^.]+\.[^.]+/) {
open(OUT,'>>/tmp/loncapa_updatequery.out');
print(OUT 'internet domain'."\t".$choice."\n");
close(OUT);
$intdom=$choice;
$flag=1;
}
else {
print "Invalid input (must be at least two levels separated by . - e.g., ustate.edu).\n";
}
}
# get hostname
# accept if valid, if not valid, tell user and repeat
$flag=0;
my $posshostname;
if (($hostname =~ /^[A-Za-z0-9\-]+$/) && ($intdom ne '')) {
$posshostname = $hostname.'.'.$intdom;
}
if (($hostname =~ /^[A-Za-z0-9\-]+\.[A-Za-z0-9\-]+/) &&
($hostname =~ /^[A-Za-z0-9.\-]+$/)) {
$posshostname = $hostname;
}
while (!$flag) {
print(<<END);
****** Hostname of the server/VM *****
The hostname of the server/VM is required. This will be similar to:
somename.ustate.edu or somename.department.ustate.edu, and would be
the web address which users would point their web browsers at to
access the server.
END
if ($posshostname) {
print "ENTER HOSTNAME OF SERVER [$posshostname]:\n";
} else {
print "ENTER HOSTNAME OF SERVER:\n";
}
my $choice=<>;
chomp($choice);
if (($choice =~ /^[A-Za-z0-9\-]+\.[A-Za-z0-9\-]+/) &&
($choice =~ /^[A-Za-z0-9.\-]+$/)) {
open(OUT,'>>/tmp/loncapa_updatequery.out');
print(OUT 'hostname'."\t".$choice."\n");
close(OUT);
$desiredhostname=$choice;
$flag=1;
} elsif (($choice eq '') && ($posshostname ne '')) {
open(OUT,'>>/tmp/loncapa_updatequery.out');
print(OUT 'hostname'."\t$posshostname\n");
close(OUT);
$desiredhostname = $posshostname;
$flag = 1;
} else {
print "Invalid input (only letters, numbers, - and . allowed, with at least one .).\n";
}
}
&ssl_info();
$country = &get_country($desiredhostname);
$state = &get_state();
$city = &get_city();
($domainDescription,$country,$state,$city) = &confirm_locality($domainDescription,$country,$state,$city);
my $perlstaticref = &get_static_config();
if (ref($perlstaticref) eq 'HASH') {
my ($certsdir,$privkey,$connectcsr,$replicatecsr);
$certsdir = $perlstaticref->{'lonCertificateDirectory'};
$privkey = $perlstaticref->{'lonnetPrivateKey'};
$connectcsr = $perlstaticref->{'lonnetCertificate'};
$connectcsr =~ s/\.pem$/.csr/;
$replicatecsr = $perlstaticref->{'lonnetHostnameCertificate'};
$replicatecsr =~ s/\.pem$/.csr/;
print(<<END);
****** SSL Certificates *****
You need to provide a password to be used for the openssl key which
will be stored in $certsdir, and will be used when creating two
certificate signing requests: $connectcsr and $replicatecsr
END
my $sslkeypass = &get_new_sslkeypass();
if ($certsdir && $privkey) {
my $connectsubj = "/C=$country/ST=$state/O=$domainDescription/L=$city/CN=$lonHostID/OU=LONCAPA/emailAddress=$lonAdmEMail";
my $replicatesubj = "/C=$country/ST=$state/O=$domainDescription/L=$city/CN=internal-$desiredhostname/OU=LONCAPA/emailAddress=$lonAdmEMail";
# generate SSL key
&make_key($certsdir,$privkey,$sslkeypass);
# generate SSL csr for hostID
&make_host_csr($certsdir,$sslkeypass,$connectcsr,$connectsubj);
# generate SSL csr for internal hostname
&make_hostname_csr($certsdir,$sslkeypass,$replicatecsr,$replicatesubj);
# mail csr files to certificate@lon-capa.org (production or dev clusters).
&mail_csr('both',$lonCluster,$lonHostID,$desiredhostname,$certsdir,$connectcsr,$replicatecsr,$perlstaticref);
} else {
print "Could not acquire standard names for SSL Certificate files from loncapa_apache.conf\n";
}
} else {
print "Could not acquire standard names for SSL Certificate files from loncapa_apache.conf\n";
}
# update loncapa.conf
my $confdir = '/etc/httpd/conf/';
if ('<DIST />' eq 'sles10' || '<DIST />' eq 'sles11' || '<DIST />' eq 'sles12' || '<DIST />' eq 'sles15' || '<DIST />' eq 'suse10.1' || '<DIST />' eq 'suse10.2' || '<DIST />' eq 'suse10.3' || '<DIST />' eq 'suse11.1' || '<DIST />' eq 'suse11.2' || '<DIST />' eq 'suse11.3' || '<DIST />' eq 'suse11.4' || '<DIST />' eq 'suse12.1' || '<DIST />' eq 'suse12.2' || '<DIST />' eq 'suse12.3' || '<DIST />' eq 'suse13.1' || '<DIST />' eq 'suse13.2' || '<DIST />' eq 'debian5' || '<DIST />' eq 'debian6' || '<DIST />' eq 'ubuntu6' || '<DIST />' eq 'ubuntu8' || '<DIST />' eq 'ubuntu10' || '<DIST />' eq 'ubuntu12' || '<DIST />' eq 'ubuntu14' || '<DIST />' eq 'ubuntu16' || '<DIST />' eq 'ubuntu18' || '<DIST />' eq 'ubuntu20' || '<DIST />' eq 'ubuntu22' || '<DIST />' eq 'ubuntu24' || '<DIST />' eq 'debian10' || '<DIST />' eq 'debian11' || '<DIST />' eq 'debian12') {
$confdir = '/etc/apache2/';
}
my $filename='loncapa.conf';
my %perlvar;
if (-e "$confdir$filename") {
open(CONFIG,'<'.$confdir.$filename) or die("Can't read $confdir$filename");
while (my $configline=<CONFIG>) {
if ($configline =~ /^[^\#]*PerlSetVar/) {
my ($unused,$varname,$varvalue)=split(/\s+/,$configline);
chomp($varvalue);
$perlvar{$varname}=$varvalue if $varvalue!~/^\{\[\[\[\[/;
}
}
close(CONFIG);
}
$perlvar{'lonHostID'}=$lonHostID;
$perlvar{'lonDefDomain'}=$lonDefDomain;
$perlvar{'lonAdmEMail'}=$lonAdmEMail;
$perlvar{'lonSupportEMail'}=$lonSupportEMail;
$perlvar{'lonRole'}=$lonRole;
unless ($perlvar{'lonLoadLim'} and $perlvar{'lonLoadLim'}!~/\{\[\[\[\[/) {
$perlvar{'lonLoadLim'}='2.00';
}
unless ($perlvar{'lonUserLoadLim'} and $perlvar{'lonUserLoadLim'}!~/\{\[\[\[\[/) {
$perlvar{'lonUserLoadLim'}='0';
}
unless ($perlvar{'lonExpire'} and $perlvar{'lonExpire'}!~/\{\[\[\[\[/) {
$perlvar{'lonExpire'}='86400';
}
unless ($perlvar{'lonReceipt'} and $perlvar{'lonReceipt'}!~/\{\[\[\[\[/) {
my $lonReceipt='';
srand(time ^ $$ ^ unpack "%L*", `ps axww | gzip`);
my @alnum=(0..9,"a".."z");
foreach my $i (1..20) {
$lonReceipt.=$alnum[int(rand(36))];
}
$perlvar{'lonReceipt'}=$lonReceipt;
}
open(OUT,">$confdir$filename") or
die("Cannot output to $confdir$filename\n");
foreach my $key (keys %perlvar) {
my $value=$perlvar{$key};
my $line = "PerlSetVar $key $value";
if ($value eq '') {
$line = '#'.$line;
}
print(OUT <<END);
$line
END
}
close(OUT);
}
</perlscript>
</file>
<file>
<target dist='default'>/etc/httpd/conf/</target>
<target dist='sles10 sles11 sles12 sles15 suse10.1 suse10.2 suse10.3 suse11.1 suse11.2 suse11.3 suse11.4 suse12.1 suse12.2 suse12.3 suse13.1 suse13.2 debian5 debian6 debian10 debian11 debian12 ubuntu6 ubuntu8 ubuntu10 ubuntu12 ubuntu14 ubuntu16 ubuntu18 ubuntu20 ubuntu22 ubuntu24'>/etc/apache2/</target>
<perlscript mode='fg'>
# read values from loncapa.conf
my $confdir = "<TARGET />";
my $filename='loncapa.conf';
my %perlvar;
if (-e "$confdir$filename") {
open(CONFIG,'<'.$confdir.$filename) or
die("Can't read $confdir$filename");
while (my $configline=<CONFIG>) {
if ($configline =~ /^[^\#]*PerlSetVar/) {
my ($unused,$varname,$varvalue)=split(/\s+/,$configline);
chomp($varvalue);
$perlvar{$varname}=$varvalue;
}
}
close(CONFIG);
}
unless ($perlvar{'lonLoadLim'} and $perlvar{'lonLoadLim'}!~/\{\[\[\[\[/) {
$perlvar{'lonLoadLim'}='2.00';
}
unless ($perlvar{'lonUserLoadLim'} and $perlvar{'lonUserLoadLim'}!~/\{\[\[\[\[/) {
$perlvar{'lonUserLoadLim'}='0';
}
unless ($perlvar{'lonExpire'} and $perlvar{'lonExpire'}!~/\{\[\[\[\[/) {
$perlvar{'lonExpire'}='86400';
}
unless ($perlvar{'londAllowInsecure'} and $perlvar{'londAllowInsecure'}!~/\{\[\[\[\[/) {
$perlvar{'londAllowInsecure'}='1';
}
unless ($perlvar{'loncAllowInsecure'} and $perlvar{'loncAllowInsecure'}!~/\{\[\[\[\[/) {
$perlvar{'loncAllowInsecure'}='1';
}
my ($securestatus,$securenum)=&securesetting(%perlvar);
unless ($perlvar{'lonReceipt'} and $perlvar{'lonReceipt'}!~/\{\[\[\[\[/) {
my $lonReceipt='';
srand(time ^ $$ ^ unpack "%L*", `ps axww | gzip`);
my @alnum=(0..9,"a".."z");
foreach my $i (1..20) {
$lonReceipt.=$alnum[int(rand(36))];
}
$perlvar{'lonReceipt'}=$lonReceipt;
}
my $perlvarstatic = &get_static_config();
my (@hosts_files, @domain_files);
if ( $lonCluster ne 'existing') {
push(@domain_files,'../'.$lonCluster.'_domain.tab',
'../'.$lonCluster.'_dns_domain.tab');
push(@hosts_files,'../'.$lonCluster.'_hosts.tab',
'../'.$lonCluster.'_dns_hosts.tab');
}
push(@domain_files,'/home/httpd/lonTabs/domain.tab',
'/home/httpd/lonTabs/dns_domain.tab');
push(@hosts_files,'/home/httpd/lonTabs/hosts.tab',
'/home/httpd/lonTabs/dns_hosts.tab');
my @poss_hosts_files = @hosts_files;
if (!$domainDescription) {
foreach my $file (@domain_files) {
open(IN,'<'.$file);
while(my $line = <IN>) {
if ($line =~ /^\Q$perlvar{'lonDefDomain'}\E\:/) {
(undef,$domainDescription,$domainTabExtras)=split(/:/,$line,3);
chomp($domainDescription);
chomp($domainTabExtras);
# the remaining field (primary lib server) is handled later
$domainTabExtras = join(':',(split(/:/,$domainTabExtras))[0..5]);
last;
}
}
close(IN);
last if ($domainDescription);
}
}
if ((!$protocol) || (!$desiredhostname)) {
foreach my $file (@hosts_files) {
open(IN,'<'.$file);
while(my $line = <IN>) {
if ($line =~ /^\Q$perlvar{'lonHostID'}\E:\Q$perlvar{'lonDefDomain'}\E\:(?:access|library)\:([^:]+)\:(https?)/) {
if (!$desiredhostname) {
$desiredhostname = $1;
}
if (!$protocol) {
$protocol = $2;
chomp($protocol);
}
last;
}
}
}
}
if (!$protocol) {
$protocol = 'http';
}
if (!$intdom) {
foreach my $file (@hosts_files) {
open(IN,'<'.$file);
while(my $line = <IN>) {
if ($line =~ /^\Q$perlvar{'lonHostID'}\E:\Q$perlvar{'lonDefDomain'}\E\:(?:access|library)\:[^:]+\:https?\:([^:]+)/) {
$intdom = $1;
chomp($intdom);
last;
}
}
}
}
my (%hostnames,%protocols);
while(!$primaryLibServer && (@hosts_files || @domain_files)) {
my $file = shift(@domain_files);
open(IN,'<'.$file);
while(my $line = <IN>) {
if ($line =~ /^\Q$perlvar{'lonDefDomain'}\E\:/) {
$primaryLibServer=(split(/:/,$line))[8];
chomp($primaryLibServer);
}
}
close(IN);
last if ($primaryLibServer);
$file = shift(@hosts_files);
open(IN,'<'.$file);
while(my $line = <IN>) {
if ($line =~ /^([^\:]+)\:\Q$perlvar{'lonDefDomain'}\E\:library\:([^\:]+)/) {
push(@libservers,$1);
$hostnames{$1} = $2;
}
}
# make list unique
@libservers = keys(%{{ map { $_ => 1 } (@libservers) }});
close(IN);
if (@libservers == 1) {
$primaryLibServer = $libservers[0];
}
}
# get hostname of primaryLibServer
my ($primary_hostname,$primary_protocol);
if ($primaryLibServer) {
if ($hostnames{$primaryLibServer}) {
$primary_hostname = $hostnames{$primaryLibServer};
$primary_protocol = $protocols{$primaryLibServer};
} else {
foreach my $file (@poss_hosts_files) {
open(IN,'<'.$file);
while (my $line = <IN>) {
if ($line =~ /^([^\:]+)\:\Q$perlvar{'lonDefDomain'}\E\:library\:([^\:]+):(https?)/) {
if ($1 eq $primaryLibServer) {
$primary_hostname = $2;
$primary_protocol = $3;
last;
}
}
}
close(IN);
last if ($primary_hostname);
}
}
}
# implement editing logic below, interactively
# update loncapa.conf until 18 is entered
my $flag=0;
#
# Changes to 5, 6, and 14 not supported if configuration.db set on primary library server.
# (requires either this machine to be primary library server or for LON-CAPA and Apache
# to be running on primary library server).
#
my ($isprimary,$domconf,$url,$gotdomconf,$adminmail,$supportmail,$connectssl,%setbygui);
if ($primaryLibServer eq $perlvar{'lonHostID'}) {
$isprimary = 1;
} else {
unless ($primary_protocol eq 'https') {
$primary_protocol = 'http';
}
$url = $primary_protocol.'://'.$primary_hostname.'/cgi-bin/listdomconfig.pl';
}
my %sslnames = &get_sslnames();
my %ssldesc = &get_ssldesc();
my $domconf = &get_domain_config($perlvar{'lonDefDomain'},$primaryLibServer,$isprimary,
$url,$perlvarstatic);
if (ref($domconf)) {
$gotdomconf = 1;
if (ref($domconf->{'contacts'}) eq 'HASH') {
if (exists($domconf->{'contacts'}->{'adminemail'})) {
$adminmail = $domconf->{'contacts'}->{'adminemail'};
}
if (exists($domconf->{'contacts'}->{'supportemail'})) {
$supportmail = $domconf->{'contacts'}->{'supportemail'};
}
}
if (ref($domconf->{'ssl'}) eq 'HASH') {
foreach my $connect ('connto','connfrom') {
if (ref($domconf->{'ssl'}->{$connect}) eq 'HASH') {
my ($sslreq,$sslnoreq,$currsetting);
my %contypes;
foreach my $type ('dom','intdom','other') {
my $key;
if ($domconf->{'ssl'}->{'connect'}->{$type} eq 'req') {
$key = 'yes';
} else {
$key = 'no';
}
if ($type eq 'dom') {
$contypes{$key} .= ' own domain,';
} elsif ($type eq 'intdom') {
$contypes{$key} .= ' own institution,';
} elsif ($type eq 'other') {
$contypes{$key} .= ' other domains,';
}
}
foreach my $key (sort(keys(%contypes))) {
$contypes{$key} =~ s/^\s//;
$contypes{$key} =~ s/,$//;
if ($key eq 'yes') {
$currsetting .= ' Yes ('.$contypes{$key}.'),';
} elsif ($key eq 'no') {
$currsetting .= ' No ('.$contypes{$key}.')';
}
$currsetting =~ s/,$//;
}
if ($currsetting ne '') {
$connectssl = $sslnames{$connect}.' -- '.$currsetting.' | ';
}
}
}
$connectssl =~ s/\s\|\s$//;
}
}
if ($connectssl) {
$setbygui{'securestatus'} = 1;
$securestatus = 'Set by domain configuration via web GUI. Currently: '.$connectssl;
}
if ($adminmail) {
$adminmail = 'Set by domain configuration via web GUI. Currently: '.$adminmail;
$setbygui{'lonAdmEMail'} = 1;
} else {
$adminmail = $perlvar{'lonAdmEMail'};
}
if ($supportmail) {
$supportmail = 'Set by domain configuration via web GUI. Currently: '.$supportmail;
$setbygui{'lonSupportEMail'} = 1;
} else {
$supportmail = $perlvar{'lonSupportEMail'};
}
print "\nRetrieving status information for SSL key and certificates ...\n\n";
my ($certinfo,$lonkeystatus,$lonhostcertstatus,$lonhostnamecertstatus,$sslref) =
&get_cert_status($perlvar{'lonHostID'},$desiredhostname,$perlvarstatic);
print $certinfo;
my %sslstatus;
if (ref($sslref) eq 'HASH') {
%sslstatus = %{$sslref};
}
while (!$flag) {
print(<<END);
===============================================================================
This is now the current configuration of your machine.
1) Domain Name: $perlvar{'lonDefDomain'}
2) Domain Description: $domainDescription
3) Machine Name: $perlvar{'lonHostID'}
4) ID of primary library server for domain: $primaryLibServer
5) Server Administrator's E-mail Address: $adminmail
6) Support E-mail Address: $supportmail
7) Web Server Protocol (http or https): $protocol
8) Internet Domain Name: $intdom
9) Hostname: $desiredhostname
10) Role: $perlvar{'lonRole'}
11) Cache Expiration Time: $perlvar{'lonExpire'} (seconds)
12) Server Load: $perlvar{'lonLoadLim'}
13) User Load: $perlvar{'lonUserLoadLim'}
14) LON-CAPA "internal" connections: $securestatus
15) Private Key for SSL: $lonkeystatus
16) SSL Certificate for LON-CAPA server connections: $lonhostcertstatus
17) SSL Certificate for Content Replication: $lonhostnamecertstatus
18) Everything is correct up above
END
my @error;
foreach my $v ($perlvar{'lonDefDomain'},$perlvar{'lonHostID'}) {
if (length($v)>35) { push(@error,"Name $v too long"); }
if (length($v)<2) { push(@error,"Name $v too short"); }
if ($v=~/capa/i) {
if ($v!~/^oucapa\d+$/ &&
($v!~/^capa\d+$/ && $perlvar{'lonDefDomain'} eq 'uwsp')) {
push(@error,"Name $v contains 'capa'");
}
}
foreach my $bad ('res','raw','userfiles','priv','adm','uploaded',
'editupload') {
push(@error,"\nName $v reserved.") if $v eq $bad;
}
if ($v=~/[^\w\-.]/) { push(@error,"Name $v contains special characters"); }
}
if ($domainDescription =~ /^\s*$/) {
push(@error,"Domain Description is blank.");
} elsif ($domainDescription!~/^[\(\)\-\w\s,]+$/) {
push(@error,"Domain Description contains special characters.");
}
foreach my $v ($perlvar{'lonExpire'},$perlvar{'lonLoadLim'}) {
unless ($v=~/^[\d+\.]+$/) { push(@error,"Number expected instead of $v"); }
}
unless (($perlvar{'lonRole'} eq 'library') || ($perlvar{'lonRole'} eq 'access')) {
push(@error,"Invalid Role");
}
unless (($protocol eq 'http') || ($protocol eq 'https')) {
push(@error,"Invalid Protocol (must be http or https");
}
if (!defined($intdom)) {
push(@error,"No internet domain name designated. Enter something like ustate.edu");
} elsif ($intdom !~ /[^.]+\.\w{2,6}$/) {
push(@error,"Invalid Internet domain name (must be at least two levels separated by . - e.g., ustate.edu");
}
if (!defined($primaryLibServer)) {
if (@libservers > 0) {
push(@error,"No primary library server ID designated. Choose from: ".join(',',sort(@libservers)));
} else {
push(@error,"No library servers in this domain (including current server)");
}
} else {
if (length($primaryLibServer)>35) { push(@error,"Primary Library Server ID: $primaryLibServer too long"); }
if (length($primaryLibServer)<2) { push(@error,"Primary Library Server ID: $primaryLibServer too short"); }
if ($primaryLibServer =~/capa/i) {
if ($primaryLibServer!~/^oucapa\d+$/ &&
($primaryLibServer!~/^capa\d+$/ && $perlvar{'lonDefDomain'} eq 'uwsp')) {
push(@error,"Primary library server ID $primaryLibServer contains 'capa'")
}
}
foreach my $bad ('res','raw','userfiles','priv','adm','uploaded',
'editupload') {
push(@error,"Primary library server ID $primaryLibServer reserved.") if $primaryLibServer eq $bad;
}
if ($primaryLibServer=~/[^\w\-.]/) { push(@error,"Primary library server ID $primaryLibServer contains special characters"); }
}
my ($certsdir,$privkey,$connectcsr,$replicatecsr);
$certsdir = $perlvarstatic->{'lonCertificateDirectory'};
$privkey = $perlvarstatic->{'lonnetPrivateKey'};
$connectcsr = $perlvarstatic->{'lonnetCertificate'};
$connectcsr =~ s/\.pem$/.csr/;
$replicatecsr = $perlvarstatic->{'lonnetHostnameCertificate'};
$replicatecsr =~ s/\.pem$/.csr/;
if (@error) { print "\n*** ERRORS: \n\t".join("\n\t",@error)."\n"; }
print(<<END);
ENTER A CHOICE OF 1-17 TO CHANGE, otherwise ENTER 18:
END
my $choice=<>;
chomp($choice);
if ($choice==1) {
print(<<END);
1) Domain Name: $perlvar{'lonDefDomain'}
ENTER NEW VALUE (this is an internal value used to identify a group of
LON-CAPA machines, it must be alphanumerical, we suggest
using a part of your actual DNS domain. For example, for
the machine loncapa.msu.edu, we set the Domain to msu):
END
my $choice2=<>;
chomp($choice2);
$perlvar{'lonDefDomain'}=$choice2;
}
elsif ($choice==2) {
print(<<END);
2) Domain Description: $domainDescription
ENTER NEW VALUE (this should be a string that describes your domain, spaces
and punctuation are fine except for ':'):
END
my $choice2=<>;
chomp($choice2);
$domainDescription=$choice2;
}
elsif ($choice==3) {
print(<<END);
3) Machine Name: $perlvar{'lonHostID'}
ENTER NEW VALUE (this will be the name of the machine in the LON-CAPA network
it cannot contain any of '_' '-' '.' or ':'. We suggest that
if you are in the domain 'example' and are the first library
server you enter 'examplel1') :
END
my $choice2=<>;
chomp($choice2);
$perlvar{'lonHostID'}=$choice2;
}
elsif ($choice==4) {
print(<<END);
4) ID of primary library server for domain: $primaryLibServer
ENTER NEW VALUE (this will be the LON-CAPA Machine ID of a library server in
your domain; it cannot contain any of '_' '-' '.' or ':'.
This server will be where domain data which are not
associated with any specific home library server
will be stored (e.g., e-mail broadcast by Domain Coordinators
to users in the domain).
END
my $choice2=<>;
chomp($choice2);
$primaryLibServer=$choice2;
}
elsif ($choice==5) {
if ($setbygui{'lonAdmEMail'}) {
print(<<END);
5) Server Administrator's E-mail Address: $adminmail
Use the web GUI (as domain coordinator) to make changes after completing the UPDATE.
END
} else {
print(<<END);
5) Server Administrator's E-mail Address: $perlvar{'lonAdmEMail'}
ENTER NEW VALUE:
END
my $choice2=<>;
chomp($choice2);
$perlvar{'lonAdmEMail'}=$choice2;
$adminmail=$perlvar{'lonAdmEMail'};
}
}
elsif ($choice==6) {
if ($setbygui{'lonSupportEMail'}) {
print(<<END);
6) Support E-mail Address: $supportmail
Use the web GUI (as domain coordinator) to make changes after completing the UPDATE.
END
} else {
print(<<END);
6) Support E-mail Address: $perlvar{'lonSupportEMail'}
ENTER NEW VALUE:
END
my $choice2=<>;
chomp($choice2);
$perlvar{'lonSupportEMail'}=$choice2;
$supportmail=$perlvar{'lonSupportEMail'};
}
}
elsif ($choice==7) {
print(<<END);
7) Server Protocol (http or https):
ENTER NEW VALUE: (this should be either 'http' or 'https'
if in doubt set to 'http'):
END
my $choice2=<>;
chomp($choice2);
$protocol=$choice2;
}
elsif ($choice==8) {
print(<<END);
8) Internet Domain Name of Institution
ENTER NEW VALUE:
END
my $choice2=<>;
chomp($choice2);
$intdom=$choice2;
}
elsif ($choice==9) {
print(<<END);
9) Hostname of Server/VM
ENTER NEW VALUE:
END
my $choice2=<>;
chomp($choice2);
$desiredhostname=$choice2;
}
elsif ($choice==10) {
print(<<END);
10) Role: $perlvar{'lonRole'}
ENTER NEW VALUE (this should be either 'access' or 'library'
if in doubt select 'library'):
END
my $choice2=<>;
chomp($choice2);
$perlvar{'lonRole'}=$choice2;
}
elsif ($choice==11) {
print(<<END);
11) Cache Expiration Time: $perlvar{'lonExpire'}
ENTER NEW VALUE (in seconds, 86400 is a reasonable value):
END
my $choice2=<>;
chomp($choice2);
$perlvar{'lonExpire'}=$choice2;
}
elsif ($choice==12) {
print(<<END);
12) Server Load: $perlvar{'lonLoadLim'}
ENTER NEW VALUE:
END
my $choice2=<>;
chomp($choice2);
$perlvar{'lonLoadLim'}=$choice2;
}
elsif ($choice==13) {
print(<<END);
13) User Load: $perlvar{'lonUserLoadLim'}
Numer of users that can login before machine is 'overloaded'
ENTER NEW VALUE (integer value, 0 means there is no limit):
END
my $choice2=<>;
chomp($choice2);
$perlvar{'lonUserLoadLim'}=$choice2;
}
elsif ($choice==14) {
if ($setbygui{'securestatus'}) {
print(<<END);
14) Allow only secure connections: $securestatus
Use the web GUI (as domain coordinator) to make changes after completing the UPDATE.
END
} else {
print(<<END);
14) Allow only secure connections: $securestatus
The Lon-CAPA communication daemons lonc and lond can be configured to
allow only secure connections by default.
POSSIBLE CHOICES:
1) allow only secure connections and don't connect to machines that
can not be connected to securely
2) allow only secure connections but allow this machine to connect to
machines that don't support secure connections
3) allow insecure connections to this machine but only allow connections
to machines that support secure connections
4) allow insecure connections
ENTER NEW VALUE (currently $securenum):
END
my $choice2=<>;
chomp($choice2);
if ($choice2 eq '1') {
$perlvar{'loncAllowInsecure'}=0;$perlvar{'londAllowInsecure'}=0;
} elsif ($choice2 eq '2') {
$perlvar{'loncAllowInsecure'}=0;$perlvar{'londAllowInsecure'}=1;
} elsif ($choice2 eq '3') {
$perlvar{'loncAllowInsecure'}=1;$perlvar{'londAllowInsecure'}=0;
} elsif ($choice2 eq '4') {
$perlvar{'loncAllowInsecure'}=1;$perlvar{'londAllowInsecure'}=1;
}
($securestatus,$securenum)=&securesetting(%perlvar);
}
} elsif ($choice==15) {
if ($sslstatus{'key'} == 1) {
print(<<END);
15) Private Key for SSL: $lonkeystatus
POSSIBLE CHOICES:
1) overwrite existing key
2) make no change
ENTER NEW VALUE
END
my $choice2=<>;
chomp($choice2);
if ($choice2 eq '1') {
my $sslkeypass = &get_new_sslkeypass();
&make_key($certsdir,$privkey,$sslkeypass);
}
} elsif ($sslstatus{'key'} == 0) {
print(<<END);
15) Private Key for SSL: $lonkeystatus
END
my $sslkeypass = &get_new_sslkeypass();
&make_key($certsdir,$privkey,$sslkeypass);
print "\nRetrieving status information for SSL key and certificates ...\n\n";
($certinfo,$lonkeystatus,$lonhostcertstatus,$lonhostnamecertstatus,$sslref) =
&get_cert_status($perlvar{'lonHostID'},$desiredhostname,$perlvarstatic);
if (ref($sslref) eq 'HASH') {
%sslstatus = %{$sslref};
}
}
} elsif ($choice==16) {
if (($sslstatus{'host'} == 1) || ($sslstatus{'host'} == 2) || ($sslstatus{'host'} == 3)) {
print(<<END);
16) SSL Certificate for LON-CAPA server connections: $lonhostcertstatus
POSSIBLE CHOICES:
1) create new certificate signing request with new key
2) create new certificate signing request with existing key
3) resend current certificate signing request
4) make no change
ENTER NEW VALUE
END
my $choice2=<>;
chomp($choice2);
if (($choice2 eq '1') || ($choice2 eq '2')) {
&ssl_info();
my $country = &get_country($desiredhostname);
my $state = &get_state();
my $city = &get_city();
my $connectsubj = "/C=$country/ST=$state/O=$domainDescription/L=$city/CN=$perlvar{'lonHostID'}/OU=LONCAPA/emailAddress=$adminmail";
($domainDescription,$country,$state,$city) = &confirm_locality($domainDescription,$country,$state,$city);
my $sslkeypass;
if ($choice2 eq '1') {
$sslkeypass = &get_new_sslkeypass();
&make_key($certsdir,$privkey,$sslkeypass);
} elsif ($choice2 eq '2') {
$sslkeypass = &get_password('Enter existing password for SSL key');
&encrypt_key($certsdir,$privkey,$sslkeypass);
}
&make_host_csr($certsdir,$sslkeypass,$connectcsr,$connectsubj);
&mail_csr('host',$lonCluster,$perlvar{'lonHostID'},$desiredhostname,$certsdir,$connectcsr,$replicatecsr,$perlvarstatic);
print "\nRetrieving status information for SSL key and certificates ...\n\n";
($certinfo,$lonkeystatus,$lonhostcertstatus,$lonhostnamecertstatus,$sslref) =
&get_cert_status($perlvar{'lonHostID'},$desiredhostname,$perlvarstatic);
if (ref($sslref) eq 'HASH') {
%sslstatus = %{$sslref};
}
} elsif ($choice2 eq '3') {
if (-e "$certsdir/$connectcsr") {
&mail_csr('host',$lonCluster,$perlvar{'lonHostID'},$desiredhostname,$certsdir,$connectcsr,$replicatecsr,$perlvarstatic);
}
}
} elsif (($sslstatus{'host'} == 0) || ($sslstatus{'host'} == 4) || ($sslstatus{'host'} == 5)) {
my $sslkeypass;
if ($sslstatus{'key'} == 1) {
print(<<END);
16) SSL Certificate for LON-CAPA server connections: $lonhostcertstatus
POSSIBLE CHOICES:
1) create new certificate signing request with new key
2) create new certificate signing request with existing key
3) make no change
ENTER NEW VALUE
END
my $choice2=<>;
chomp($choice2);
if ($choice2 eq '1') {
$sslkeypass = &get_new_sslkeypass();
&make_key($certsdir,$privkey,$sslkeypass);
} elsif ($choice2 eq '2') {
$sslkeypass = &get_password('Enter existing password for SSL key');
&encrypt_key($certsdir,$privkey,$sslkeypass);
}
} else {
print(<<END);
16) SSL Certificate for LON-CAPA server connections: $lonhostcertstatus
END
$sslkeypass = &get_new_sslkeypass();
}
&ssl_info();
my $country = &get_country($desiredhostname);
my $state = &get_state();
my $city = &get_city();
my $connectsubj = "/C=$country/ST=$state/O=$domainDescription/L=$city/CN=$perlvar{'lonHostID'}/OU=LONCAPA/emailAddress=$adminmail";
&make_host_csr($certsdir,$sslkeypass,$connectcsr,$connectsubj);
&mail_csr('host',$lonCluster,$perlvar{'lonHostID'},$desiredhostname,$certsdir,$connectcsr,$replicatecsr,$perlvarstatic);
print "\nRetrieving status information for SSL key and certificates ...\n\n";
($certinfo,$lonkeystatus,$lonhostcertstatus,$lonhostnamecertstatus,$sslref) =
&get_cert_status($perlvar{'lonHostID'},$desiredhostname,$perlvarstatic);
if (ref($sslref) eq 'HASH') {
%sslstatus = %{$sslref};
}
}
} elsif ($choice==17) {
if (($sslstatus{'hostname'} == 1) || ($sslstatus{'hostname'} == 2) || ($sslstatus{'hostname'} == 3)) {
print(<<END);
17) SSL Certificate for Content Replication: $lonhostnamecertstatus
POSSIBLE CHOICES:
1) create new certificate signing request with new key
2) create new certificate signing request with existing key
3) resend current certificate signing request
4) make no change
ENTER NEW VALUE
END
my $choice2=<>;
chomp($choice2);
if (($choice2 eq '1') || ($choice2 eq '2')) {
&ssl_info();
my $country = &get_country($desiredhostname);
my $state = &get_state();
my $city = &get_city();
my $replicatesubj = "/C=$country/ST=$state/O=$domainDescription/L=$city/CN=internal-$desiredhostname/OU=LONCAPA/emailAddress=$adminmail";
my $sslkeypass;
if ($choice2 eq '1') {
$sslkeypass = &get_new_sslkeypass();
&make_key($certsdir,$privkey,$sslkeypass);
} elsif ($choice2 eq '2') {
$sslkeypass = &get_password('Enter existing password for SSL key');
&encrypt_key($certsdir,$privkey,$sslkeypass);
}
&make_hostname_csr($certsdir,$sslkeypass,$replicatecsr,$replicatesubj);
&mail_csr('hostname',$lonCluster,$perlvar{'lonHostID'},$desiredhostname,$certsdir,$connectcsr,$replicatecsr,$perlvarstatic);
print "\nRetrieving status information for SSL key and certificates ...\n\n";
($certinfo,$lonkeystatus,$lonhostcertstatus,$lonhostnamecertstatus,$sslref) =
&get_cert_status($perlvar{'lonHostID'},$desiredhostname,$perlvarstatic);
if (ref($sslref) eq 'HASH') {
%sslstatus = %{$sslref};
}
} elsif ($choice2 eq '3') {
if (-e "$certsdir/$replicatecsr") {
&mail_csr('hostname',$lonCluster,$perlvar{'lonHostID'},$desiredhostname,$certsdir,$connectcsr,$replicatecsr,$perlvarstatic);
}
}
} elsif (($sslstatus{'hostname'} == 0) || ($sslstatus{'hostname'} == 4) || ($sslstatus{'hostname'} == 5)) {
my $sslkeypass;
if ($sslstatus{'key'} == 1) {
print(<<END);
17) SSL Certificate for Content Replication: $lonhostnamecertstatus
POSSIBLE CHOICES:
1) create new certificate signing request with new key
2) create new certificate signing request with existing key
3) make no change
ENTER NEW VALUE
END
my $choice2=<>;
chomp($choice2);
if ($choice2 eq '1') {
$sslkeypass = &get_new_sslkeypass();
&make_key($certsdir,$privkey,$sslkeypass);
} elsif ($choice2 eq '2') {
$sslkeypass = &get_password('Enter existing password for SSL key');
&encrypt_key($certsdir,$privkey,$sslkeypass);
}
} else {
print(<<END);
17) SSL Certificate for Content Replication: $lonhostnamecertstatus
END
$sslkeypass = &get_new_sslkeypass();
}
&ssl_info();
my $country = &get_country($desiredhostname);
my $state = &get_state();
my $city = &get_city();
my $replicatesubj = "/C=$country/ST=$state/O=$domainDescription/L=$city/CN=internal-$desiredhostname/OU=LONCAPA/emailAddress=$adminmail";
&make_hostname_csr($certsdir,$sslkeypass,$replicatecsr,$replicatesubj);
&mail_csr('hostname',$lonCluster,$perlvar{'lonHostID'},$desiredhostname,$certsdir,$connectcsr,$replicatecsr,$perlvarstatic);
print "\nRetrieving status information for SSL key and certificates ...\n\n";
($certinfo,$lonkeystatus,$lonhostcertstatus,$lonhostnamecertstatus,$sslref) =
&get_cert_status($perlvar{'lonHostID'},$desiredhostname,$perlvarstatic);
if (ref($sslref) eq 'HASH') {
%sslstatus = %{$sslref};
}
}
} elsif (($choice==18) && (!@error)) {
$flag=1;
} else {
print "Invalid input.\n";
}
}
open(OUT,">$confdir$filename") or
die("Cannot output to $confdir$filename\n");
foreach my $key (keys %perlvar) {
my $value=$perlvar{$key};
my $line = "PerlSetVar $key $value";
if ($value eq '') {
$line = '#'.$line;
}
print(OUT <<END) unless ($perlvarstatic->{$key});
$line
END
}
close(OUT);
</perlscript>
</file>
<file>
<target dist='default'>loncom/hosts.tab</target>
<perlscript mode='fg'>
unless (-l "<TARGET />") {
if ($desiredhostname eq '') {
my $hostname=`hostname -f`;chomp($hostname);
$desiredhostname = $hostname;
}
my $date=`date -I`; chomp($date);
my $lonHostID=$perlvar{'lonHostID'};
$lonHostID=~s/[^\w\-.]//g;
my $lineexistflag=0;
my $hostidexistflag=0;
my $line2insert=<<END;
$perlvar{'lonHostID'}:$perlvar{'lonDefDomain'}:$perlvar{'lonRole'}:$desiredhostname:$protocol:$intdom
END
if (!$domainTabExtras) {
$domainTabExtras=':::::';
}
my $domaininsert="$perlvar{'lonDefDomain'}:$domainDescription:$domainTabExtras:$primaryLibServer\n";
if ($lonCluster eq 'standalone') {
open(OUT,'>../'.$lonCluster.'_hosts.tab') or
die('file generation error');
print(OUT $line2insert);
print OUT ("^$desiredhostname:$protocol\n");
close(OUT);
open(OUT,'>../'.$lonCluster.'_dns_hosts.tab') or
die('file generation error');
print(OUT $line2insert);
close(OUT);
open(OUT,'>../'.$lonCluster.'_domain.tab') or
die('file generation error');
print(OUT $domaininsert);
close(OUT);
open(OUT,'>../'.$lonCluster.'_dns_domain.tab') or
die('file generation error');
print(OUT $domaininsert);
close(OUT);
}
if ($flag==1) {
`rm -f ../hosts.tab`;
`rm -f ../dns_hosts.tab`;
`ln -s ${lonCluster}_dns_hosts.tab ../dns_hosts.tab`;
open(IN,'<../'.$lonCluster.'_dns_hosts.tab');
while(my $line = <IN>) {
if ($line =~ /^\Q$line2insert\E$/) {
$lineexistflag=1;
}
if ($line =~ /^\Q$lonHostID\E\:/) {
$hostidexistflag=1;
}
}
close(IN);
if ($hostidexistflag and !$lineexistflag) {
print <<END;
WARNING: $lonHostID already exists inside
loncapa/loncom/${lonCluster}_dns_hosts.tab. The entry inside
${lonCluster}_dns_hosts.tab does not match your settings.
An entry inside ${lonCluster}_hosts.tab will be made
with your new values.
END
`grep -v "$lonHostID:" ../${lonCluster}_hosts.tab > ../new_${lonCluster}_hosts.tab`;
open(OUT,'>>../new_'.$lonCluster.'_hosts.tab') or
die("cannot open loncom/${lonCluster}_hosts.tab for output\n");
print(OUT $line2insert);
close(OUT);
`ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;
# email appropriate message
`echo "REPLACE:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "REPLACE:$lonCluster:$lonHostID:$protocol:$intdom:$date" installrecord\@mail.lon-capa.org`;
}
elsif ($hostidexistflag and $lineexistflag) {
print <<END;
Entry exists in ${lonCluster}_dns_hosts.tab. Making duplicate entry in ${lonCluster}_hosts.tab
END
`grep -v "$lonHostID:" ../${lonCluster}_hosts.tab > ../new_${lonCluster}_hosts.tab`;
open(OUT,'>>../new_'.$lonCluster.'_hosts.tab') or
die("cannot open loncom/${lonCluster}_hosts.tab for output\n");
print(OUT $line2insert);
close(OUT);
`ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;
# email appropriate message
`echo "STABLEUPDATE:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "STABLEUPDATE:$lonCluster:$lonHostID:$protocol:$intdom:$date" installrecord\@mail.lon-capa.org`;
}
elsif (!$hostidexistflag and !$lineexistflag) {
print <<END;
New entry for $lonCluster.
END
`cat ../${lonCluster}_hosts.tab > ../new_${lonCluster}_hosts.tab`;
open(OUT,'>>../new_'.$lonCluster.'_hosts.tab') or
die("cannot open loncom/new_${lonCluster}_hosts.tab for output\n");
print(OUT $line2insert);
close(OUT);
`ln -s new_${lonCluster}_hosts.tab ../hosts.tab`;
# email appropriate message
`echo "INSERT:$lonCluster:$lonHostID:$date:$line2insert" | mail -s "INSERT:$lonCluster:$lonHostID:$protocol:$intdom:$date" installrecord\@mail.lon-capa.org`;
}
}
$lineexistflag=0;
my $domainexistflag=0;
if ($flag==1) {
`rm -f ../domain.tab`;
`rm -f ../dns_domain.tab`;
`ln -s ${lonCluster}_dns_domain.tab ../dns_domain.tab`;
open(IN,'<../'.$lonCluster.'_dns_domain.tab');
while(my $line = <IN>) {
if ($line =~/^\Q$domaininsert\E$/) {
$lineexistflag=1;
}
if ($line =~/^\Q$perlvar{'lonDefDomain'}\E\:/) {
$domainexistflag=1;
}
}
close(IN);
if ($domainexistflag and !$lineexistflag) {
print <<END;
WARNING: $perlvar{'lonDefDomain'} already exists inside
loncapa/loncom/${lonCluster}_dns_domain.tab. The entry inside
${lonCluster}_dns_domain.tab does not match your settings.
An entry will be made in inside ${lonCluster}_domain.tab
with your new values.
END
`grep -v "$perlvar{'lonDefDomain'}:" ../${lonCluster}_domain.tab > ../new_${lonCluster}_domain.tab`;
open(OUT,'>>../new_'.$lonCluster.'_domain.tab') or
die("cannot open loncom/${lonCluster}_domain.tab for output\n");
print(OUT $domaininsert);
close(OUT);
`ln -s new_${lonCluster}_domain.tab ../domain.tab`;
# email appropriate message
`echo "REPLACEdom:$lonCluster:$lonHostID:$date:$domaininsert" | mail -s "REPLACEdom:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
}
elsif ($domainexistflag and $lineexistflag) {
`grep -v "$perlvar{'lonDefDomain'}:" ../${lonCluster}_domain.tab > ../new_${lonCluster}_domain.tab`;
open(OUT,'>>../new_'.$lonCluster.'_domain.tab') or
die("cannot open loncom/${lonCluster}_domain.tab for output\n");
print(OUT $domaininsert);
close(OUT);
print <<END;
Entry exists in ${lonCluster}_dns_domain.tab. Making duplicate entry in ${lonCluster}_domain.tab
END
`ln -s new_${lonCluster}_domain.tab ../domain.tab`;
# email appropriate message
`echo "STABLEUPDATEdom:$lonCluster:$lonHostID:$date:$domaininsert" | mail -s "STABLEUPDATEdom:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
}
elsif (!$domainexistflag and !$lineexistflag) {
print <<END;
New entry for $lonCluster.
END
`cat ../${lonCluster}_domain.tab > ../new_${lonCluster}_domain.tab`;
open(OUT,'>>../new_'.$lonCluster.'_domain.tab') or
die("cannot open loncom/new_${lonCluster}_domain.tab for output\n");
print(OUT $domaininsert);
close(OUT);
`ln -s new_${lonCluster}_domain.tab ../domain.tab`;
# email appropriate message
`echo "INSERTdom:$lonCluster:$lonHostID:$date:$domaininsert" | mail -s "INSERTdom:$lonCluster:$lonHostID:$date" installrecord\@mail.lon-capa.org`;
}
}
}
</perlscript>
</file>
</files>
</piml>
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/back.gif){kind=icon}
Return to updatequery.piml CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [LON-CAPA] / doc / loncapafiles