--- rat/lonratedt.pm 2006/05/30 17:15:10 1.78
+++ rat/lonratedt.pm 2009/01/20 16:38:49 1.92
@@ -1,7 +1,7 @@
# The LearningOnline Network with CAPA
# Edit Handler for RAT Maps
#
-# $Id: lonratedt.pm,v 1.78 2006/05/30 17:15:10 www Exp $
+# $Id: lonratedt.pm,v 1.92 2009/01/20 16:38:49 bisitz Exp $
#
# Copyright Michigan State University Board of Trustees
#
@@ -29,381 +29,16 @@
package Apache::lonratedt;
-=pod
-
-=head1 NAME
-
-Apache::lonratedt: simple resource assembly tool
-
-=head1 SYNOPSIS
-
-lonratedt provides the routines and the handler for the Advanced
- Resource Assembly Tool (RAT), and ties the various pieces together
- with Javascript.
-
-=head1 OVERVIEW
-
-=head2 Map Representation
-
-=begin latex
-
-%
-\begin{figure}
-\begin{center}\includegraphics[%
- width=0.55\paperwidth,bb = 0 0 200 100, draft, type=eps]{Map_Example}\end{center}
-
-
-\caption{\label{Map_In_Advanced_Editor}Example of a Map in the Advanced Editor}
-\end{figure}
-%
-\begin{figure}
-\begin{lyxcode}
-
-\end{lyxcode}
-
-\caption{\label{XML}XML for Map in Figure \ref{Map_In_Advanced_Editor}}
-\end{figure}
-
-=end latex
-
-Fig. "XML for Map in Figure" shows the XML representation of the
-resource map shown in Fig. "Example of a Map in the Advanced Editor",
-which is the format in which maps are stored. In the figure, however,
-additional graphical map layout information generated by the Advanced
-Resource Assembly Tool is not displayed. This graphical information is
-optional to re-generate the same graphical layout when the map is
-brought up again in the Resource Assembly Tool, and is not needed for
-any other system functionality.
-
-Maps can be generated by tools other than the Resource Assembly
-Tool. In particular, an author might have some other representation of
-a course sequence, which can be converted into a map using scripts. If
-this map then were to be brought up in the Resource Assembly Tool, the
-Tool would automatically generate a graphical layout for it. Each
-entry of the map (resources, conditions and links) is stored in a
-separate tag.
-
-Resources and conditionsX have to have unique ID
-numbers. These numbers are automatically generated by the Resource
-Assembly Tool when the entry is first created, or added to the entries
-when a map generated outside the Resource Assembly Tool is first
-retrieved. They can also be assigned by custom scripts or added in by
-hand.
-
-In the XML example, entry 1 is the start resource of the map. When
-this map is accessed, the source (src) URL of this tag will be the
-first resource rendered. Entry 2 is the finish resource of this
-map. This resource will be the last resource in the sequence of
-resources. Entry 6 is a problem resource with the given URL and title,
-as well as the priority "mandatory". Entry 19 is a condition, which is
-used by the link between entries 6, the problem, and 9, a
-sequence. I
-
-=cut
-
use strict;
use Apache::Constants qw(:common);
use Apache::lonnet;
-use Apache::lonratsrv;
-use Apache::lonsequence;
-use Apache::loncommon;
+use Apache::lonsequence();
+use Apache::loncommon();
use Apache::lonlocal;
+use LONCAPA::map();
use File::Copy;
-use lib '/home/httpd/lib/perl/';
use LONCAPA;
-
-
-use vars qw(@order @resources @resparms @zombies);
-
-
-# Mapread read maps into global arrays @links and @resources, determines status
-# sets @order - pointer to resources in right order
-# sets @resources - array with the resources with correct idx
-#
-sub mapread {
- my $fn=shift;
-
- my @links;
- undef @links;
- undef @resources;
- undef @order;
- undef @resparms;
- undef @zombies;
-
- @resources=('');
- @order=();
- @resparms=();
- @zombies=();
-
- my ($outtext,$errtext)=&Apache::lonratsrv::loadmap($fn,'');
- if ($errtext) { return ($errtext,2); }
-
-# -------------------------------------------------------------------- Read map
- foreach (split(/\<\&\>/,$outtext)) {
- my ($command,$number,$content)=split(/\<\:\>/,$_);
- if ($command eq 'objcont') {
- my ($title,$src,$ext,$type)=split(/\:/,$content);
- if ($ext eq 'cond') { next; }
- if ($type ne 'zombie') {
- $resources[$number]=$content;
- } else {
- $zombies[$number]=$content;
- }
- }
- if ($command eq 'objlinks') {
- $links[$number]=$content;
- }
- if ($command eq 'objparms') {
- if ($resparms[$number]) {
- $resparms[$number].='&&&'.$content;
- } else {
- $resparms[$number]=$content;
- }
- }
- }
-# ------------------------------------------------------- Is this a linear map?
- my @starters=();
- my @endings=();
- undef @starters;
- undef @endings;
-
- foreach (@links) {
- if (defined($_)) {
- my ($start,$end,$cond)=split(/\:/,$_);
- if ((defined($starters[$start])) || (defined($endings[$end]))) {
- return
- (&mt('Map has branchings. Use advanced editor.'),1);
- }
- $starters[$start]=1;
- $endings[$end]=1;
- if ($cond) {
- return
- (&mt('Map has conditions. Use advanced editor.'),1);
- }
- }
-
- }
- for (my $i=1; $i<=$#resources; $i++) {
- if (defined($resources[$i])) {
- unless (($starters[$i]) || ($endings[$i])) {
- return
- (&mt('Map has unconnected resources. Use advanced editor.'),1);
- }
- }
- }
-# ---------------------------------------------- Did we just read an empty map?
- if ($#resources<1) {
- undef $resources[0];
- $resources[1]=':::start';
- $resources[2]=':::finish';
- }
-# -------------------------------------------------- This is a linear map, sort
-
- my $startidx=0;
- my $endidx=0;
- for (my $i=0; $i<=$#resources; $i++) {
- if (defined($resources[$i])) {
- my ($title,$url,$ext,$type)=split(/\:/,$resources[$i]);
- if ($type eq 'start') { $startidx=$i; }
- if ($type eq 'finish') { $endidx=$i; }
- }
- }
- my $k=0;
- my $currentidx=$startidx;
- $order[$k]=$currentidx;
- for (my $i=0; $i<=$#resources; $i++) {
- foreach (@links) {
- my ($start,$end)=split(/\:/,$_);
- if ($start==$currentidx) {
- $currentidx=$end;
- $k++;
- $order[$k]=$currentidx;
- last;
- }
- }
- if ($currentidx==$endidx) { last; }
- }
- return $errtext;
-}
-
-# ---------------------------------------------- Read a map as well as possible
-# Also used by the sequence handler
-# Call lonsequence::attemptread to read from resource space
-#
-sub attemptread {
- my $fn=shift;
-
- my @links;
- undef @links;
- my @theseres;
- undef @theseres;
-
- my ($outtext,$errtext)=&Apache::lonratsrv::loadmap($fn,'');
- if ($errtext) { return @theseres }
-
-# -------------------------------------------------------------------- Read map
- foreach (split(/\<\&\>/,$outtext)) {
- my ($command,$number,$content)=split(/\<\:\>/,$_);
- if ($command eq 'objcont') {
- my ($title,$src,$ext,$type)=split(/\:/,$content);
- unless ($type eq 'zombie') {
- $theseres[$number]=$content;
- }
- }
- if ($command eq 'objlinks') {
- $links[$number]=$content;
- }
- }
-
-# --------------------------------------------------------------- Sort, sort of
-
- my @objsort=();
- undef @objsort;
-
- my @data1=();
- my @data2=();
- undef @data1;
- undef @data2;
-
- my $k;
- my $kj;
- my $j;
- my $ij;
-
- for ($k=1;$k<=$#theseres;$k++) {
- if (defined($theseres[$k])) {
- $objsort[$#objsort+1]=$k;
- }
- }
-
- for ($k=1;$k<=$#links;$k++) {
- if (defined($links[$k])) {
- @data1=split(/\:/,$links[$k]);
- $kj=-1;
- for (my $j=0;$j<=$#objsort;$j++) {
- if ((split(/\:/,$objsort[$j]))[0]==$data1[0]) {
- $kj=$j;
- }
- }
- if ($kj!=-1) { $objsort[$kj].=':'.$data1[1]; }
- }
- }
- for ($k=0;$k<=$#objsort;$k++) {
- for ($j=0;$j<=$#objsort;$j++) {
- if ($k!=$j) {
- @data1=split(/\:/,$objsort[$k]);
- @data2=split(/\:/,$objsort[$j]);
- my $dol=$#data1+1;
- my $dtl=$#data2+1;
- if ($dol+$dtl<1000) {
- for ($kj=1;$kj<$dol;$kj++) {
- if ($data1[$kj]==$data2[0]) {
- for ($ij=1;$ij<$dtl;$ij++) {
- $data1[$#data1+1]=$data2[$ij];
- }
- }
- }
- for ($kj=1;$kj<$dtl;$kj++) {
- if ($data2[$kj]==$data1[0]) {
- for ($ij=1;$ij<$dol;$ij++) {
- $data2[$#data2+1]=$data1[$ij];
- }
- }
- }
- $objsort[$k]=join(':',@data1);
- $objsort[$j]=join(':',@data2);
- }
- }
- }
- }
-# ---------------------------------------------------------------- Now sort out
-
- @objsort=sort {
- my @data1=split(/\:/,$a);
- my @data2=split(/\:/,$b);
- my $rvalue=0;
- my $k;
- for ($k=1;$k<=$#data1;$k++) {
- if ($data1[$k]==$data2[0]) { $rvalue--; }
- }
- for ($k=1;$k<=$#data2;$k++) {
- if ($data2[$k]==$data1[0]) { $rvalue++; }
- }
- if ($rvalue==0) { $rvalue=$#data2-$#data1; }
- $rvalue;
- } @objsort;
-
- my @outres=();
- undef @outres;
-
- for ($k=0;$k<=$#objsort;$k++) {
- $outres[$k]=$theseres[(split(/\:/,$objsort[$k]))[0]];
- }
- return @outres;
-}
+use HTML::Entities();
# --------------------------------------------------------- Build up RAT screen
sub ratedt {
@@ -455,201 +90,11 @@ sub buttons {
return $output.'';
}
-# ------------------------------------- Revive zombie idx or get unused number
-
-sub getresidx {
- my $url=shift;
- my $max=1+($#resources>$#zombies?$#resources:$#zombies);
- unless ($url) { return $max; }
- for (my $i=0; $i<=$#zombies; $i++) {
- my ($title,$src,$ext,$type)=split(/\:/,$zombies[$i]);
- if ($src eq $url) {
- undef $zombies[$i];
- return $i;
- }
- }
- return $max;
-}
-
-# --------------------------------------------------------------- Make a zombie
-
-sub makezombie {
- my $idx=shift;
- my ($name,$url,$ext)=split(/\:/,$resources[$idx]);
- my $now=time;
- $zombies[$idx]=$name.
- ' [('.$now.','.$env{'user.name'}.','.$env{'user.domain'}.')]:'.
- $url.':'.$ext.':zombie';
-}
-
-# ----------------------------------------------------------- Paste into target
-# modifies @order, @resources
-
-sub pastetarget {
- my ($after,@which)=@_;
- my @insertorder=();
- foreach (@which) {
- if (defined($_)) {
- my ($name,$url)=split(/\=/,$_);
- $name=&unescape($name);
- $url=&unescape($url);
- if ($url) {
- my $idx=&getresidx($url);
- $insertorder[$#insertorder+1]=$idx;
- my $ext='false';
- if ($url=~/^http\:\/\//) { $ext='true'; }
- $url=~s/\:/\:/g;
- $name=~s/\:/\:/g;
- $resources[$idx]=$name.':'.$url.':'.$ext.':normal:res';
- }
- }
- }
- my @oldorder=splice(@order,$after);
- @order=(@order,@insertorder,@oldorder);
-}
-
-# ------------------------------------------------ Get start and finish correct
-# modifies @resources
-
-sub startfinish {
-# Remove all start and finish
- foreach (@order) {
- my ($name,$url,$ext)=split(/\:/,$resources[$_]);
- if ($url=~/http\&colon\:\/\//) { $ext='true'; }
- $resources[$_]=$name.':'.$url.':'.$ext.':normal:res';
- }
-# Garbage collection
- my $stillchange=1;
- while (($#order>1) && ($stillchange)) {
- $stillchange=0;
- for (my $i=0;$i<=$#order;$i++) {
- my ($name,$url,$ext)=split(/\:/,$resources[$order[$i]]);
- unless ($url) {
-# Take out empty resource
- for (my $j=$i+1;$j<=$#order;$j++) {
- $order[$j-1]=$order[$j];
- }
- $#order--;
- $stillchange=1;
- last;
- }
- }
- }
-# Put in a start resource
- my ($name,$url,$ext)=split(/\:/,$resources[$order[0]]);
- $resources[$order[0]]=$name.':'.$url.':'.$ext.':start:res';
-# Make sure this has at least start and finish
- if ($#order==0) {
- $resources[&getresidx()]='::false';
- $order[1]=$#resources;
- }
-# Make the last one a finish resource
- ($name,$url,$ext)=split(/\:/,$resources[$order[$#order]]);
- $resources[$order[$#order]]=$name.':'.$url.':'.$ext.':finish:res';
-}
-
-# ------------------------------------------------------------------- Store map
-
-sub storemap {
- my $realfn=shift;
- my $fn=$realfn;
-# unless this is forced to work from the original file, use a temporary file
-# instead
- unless (shift) {
- $fn=$realfn.'.tmp';
- unless (-e $fn) {
- copy($realfn,$fn);
- }
- }
-# store data either into tmp or real file
- &startfinish();
- my $output='graphdef<:>no';
- my $k=1;
- for (my $i=0; $i<=$#order; $i++) {
- if (defined($resources[$order[$i]])) {
- $output.='<&>objcont<:>'.$order[$i].'<:>'.$resources[$order[$i]];
- }
- if (defined($resparms[$order[$i]])) {
- foreach (split('&&&',$resparms[$order[$i]])) {
- if ($_) {
- $output.='<&>objparms<:>'.$order[$i].'<:>'.$_;
- }
- }
- }
- if (defined($order[$i+1])) {
- if (defined($resources[$order[$i+1]])) {
- $output.='<&>objlinks<:>'.$k.'<:>'.
- $order[$i].':'.$order[$i+1].':0';
- $k++;
- }
- }
- }
- for (my $i=0; $i<=$#zombies; $i++) {
- if (defined($zombies[$i])) {
- $output.='<&>objcont<:>'.$i.'<:>'.$zombies[$i];
- }
- }
- $output=~s/http\&colon\;\/\///g;
- $env{'form.output'}=$output;
- return
- &Apache::lonratsrv::loadmap($fn,&Apache::lonratsrv::savemap($fn,''));
-}
-
-# ------------------------------------------ Store and get parameters in global
-
-sub storeparameter {
- my ($to,$name,$value,$ptype)=@_;
- my $newentry='';
- my $nametype='';
- foreach (split('&&&',$resparms[$to])) {
- my ($thistype,$thisname,$thisvalue)=split('___',$_);
- if ($thisname) {
- unless ($thisname eq $name) {
- $newentry.=$_.'&&&';
- } else {
- $nametype=$thistype;
- }
- }
- }
- unless ($ptype) { $ptype=$nametype; }
- unless ($ptype) { $ptype='string'; }
- $newentry.=$ptype.'___'.$name.'___'.$value;
- $resparms[$to]=$newentry;
-}
-
-sub delparameter {
- my ($to,$name)=@_;
- my $newentry='';
- my $nametype='';
- foreach (split('&&&',$resparms[$to])) {
- my ($thistype,$thisname,$thisvalue)=split('___',$_);
- if ($thisname) {
- unless ($thisname eq $name) {
- $newentry.=$_.'&&&';
- }
- }
- }
- $resparms[$to]=$newentry;
-}
-
-sub getparameter {
- my ($to,$name)=@_;
- my $value=undef;
- my $ptype=undef;
- foreach (split('&&&',$resparms[$to])) {
- my ($thistype,$thisname,$thisvalue)=split('___',$_);
- if ($thisname eq $name) {
- $value=$thisvalue;
- $ptype=$thistype;
- }
- }
- return ($value,$ptype);
-}
-
# ----------------------------------------------------------------- Edit script
sub editscript {
my $mode=shift;
- my $resurl=&Apache::loncommon::lastresurl();
+ my $resurl=
+ &Apache::loncommon::escape_single(&Apache::loncommon::lastresurl());
return(< ';
} else {
- $targetmsg=''.&mt('An error occured while saving.').' ';
+ $targetmsg=''.&mt('An error occurred while saving.').' ';
}
}
if ($env{'form.revert'}) {
$targetmsg=''.&mt('Reverted.').' ';
unlink($tmpfn);
my ($errtext,$fatal)=
- &mapread(&Apache::lonnet::filelocation('',$url),'');
+ &LONCAPA::map::mapread(&Apache::lonnet::filelocation('',$url),'');
}
if (-e $tmpfn) {
$targetmsg=
''.&mt('You are working with an unsaved version of your map.').' ';
- my ($errtext,$fatal)=&mapread($tmpfn,'');
+ my ($errtext,$fatal)=&LONCAPA::map::mapread($tmpfn,'');
}
# ---------------------------------------------------------- Process form input
@@ -894,10 +340,10 @@ sub smpedt {
if (defined($targetselect[-1])) {
$lastsel=$targetselect[-1];
} else {
- $lastsel=$#order+1;
+ $lastsel=$#LONCAPA::map::order+1;
}
- &pastetarget($lastsel,split(/\&/,$env{'form.importdetail'}));
- &storemap(&Apache::lonnet::filelocation('',$url));
+ &LONCAPA::map::pastetarget($lastsel,split(/\&/,$env{'form.importdetail'}));
+ &LONCAPA::map::storemap(&Apache::lonnet::filelocation('',$url));
# ------------------------------------------------------------------------- Cut
} elsif (($env{'form.cut'}) || ($env{'form.copy'})) {
$importdetail='';
@@ -919,7 +365,7 @@ sub smpedt {
}
foreach (@targetselect) {
- my ($name,$url)=split(/\:/,$resources[$order[$_-1]]);
+ my ($name,$url)=split(/\:/,$LONCAPA::map::resources[$LONCAPA::map::order[$_-1]]);
if ($url) {
$importdetail.='&'.&escape($name).'='.
&escape($url);
@@ -937,19 +383,19 @@ sub smpedt {
if ($env{'form.cut'}) {
my @neworder=();
- for (my $i=0;$i<=$#order;$i++) {
+ for (my $i=0;$i<=$#LONCAPA::map::order;$i++) {
my $include=1;
foreach (@targetselect) {
if ($_-1==$i) { $include=0; }
}
if ($include) {
- $neworder[$#neworder+1]=$order[$i];
+ $neworder[$#neworder+1]=$LONCAPA::map::order[$i];
} else {
- &makezombie($order[$i]);
+ &LONCAPA::map::makezombie($LONCAPA::map::order[$i]);
}
}
- @order=@neworder;
- &storemap(&Apache::lonnet::filelocation('',$url));
+ @LONCAPA::map::order=@neworder;
+ &LONCAPA::map::storemap(&Apache::lonnet::filelocation('',$url));
}
# ----------------------------------------------------------------------- Paste
@@ -958,43 +404,43 @@ sub smpedt {
if (defined($targetselect[-1])) {
$lastsel=$targetselect[-1];
} else {
- $lastsel=$#order+1;
+ $lastsel=$#LONCAPA::map::order+1;
}
my @newsequence;
my @curimport=split(/\&/,$env{'form.curimpdetail'});
foreach (@importselect) {
$newsequence[$#newsequence+1]=$curimport[$_];
}
- &pastetarget($lastsel,@newsequence);
- &storemap(&Apache::lonnet::filelocation('',$url));
+ &LONCAPA::map::pastetarget($lastsel,@newsequence);
+ &LONCAPA::map::storemap(&Apache::lonnet::filelocation('',$url));
# -------------------------------------------------------------------- Move up
} elsif ($env{'form.moveup'}) {
foreach (sort @targetselect) {
if ($_-1>0) {
- my $movethis=$order[$_-1];
- $order[$_-1]=$order[$_-2];
- $order[$_-2]=$movethis;
+ my $movethis=$LONCAPA::map::order[$_-1];
+ $LONCAPA::map::order[$_-1]=$LONCAPA::map::order[$_-2];
+ $LONCAPA::map::order[$_-2]=$movethis;
}
}
- &storemap(&Apache::lonnet::filelocation('',$url));
+ &LONCAPA::map::storemap(&Apache::lonnet::filelocation('',$url));
# ------------------------------------------------------------------ Move down
} elsif ($env{'form.movedown'}) {
foreach (reverse sort @targetselect) {
- if ($_-1<$#order) {
- my $movethis=$order[$_-1];
- $order[$_-1]=$order[$_];
- $order[$_]=$movethis;
+ if ($_-1<$#LONCAPA::map::order) {
+ my $movethis=$LONCAPA::map::order[$_-1];
+ $LONCAPA::map::order[$_-1]=$LONCAPA::map::order[$_];
+ $LONCAPA::map::order[$_]=$movethis;
}
}
- &storemap(&Apache::lonnet::filelocation('',$url));
+ &LONCAPA::map::storemap(&Apache::lonnet::filelocation('',$url));
# --------------------------------------------------------------------- Rename
} elsif ($env{'form.renameres'}) {
- my $residx=$Apache::lonratedt::order[$env{'form.renameidx'}-1];
- my ($name,@resrest)=split(/\:/,$Apache::lonratedt::resources[$residx]);
+ my $residx=$LONCAPA::map::order[$env{'form.renameidx'}-1];
+ my ($name,@resrest)=split(/\:/,$LONCAPA::map::resources[$residx]);
$name=$env{'form.renametitle'};
$name=~s/\:/\&colon\;/g;
- $Apache::lonratedt::resources[$residx]=$name.':'.join(':',@resrest);
- &storemap(&Apache::lonnet::filelocation('',$url));
+ $LONCAPA::map::resources[$residx]=$name.':'.join(':',@resrest);
+ &LONCAPA::map::storemap(&Apache::lonnet::filelocation('',$url));
}
# ------------------------------------------------------------ Assemble windows
@@ -1019,15 +465,17 @@ sub smpedt {
my $targetwindow=
''.
join("\n",map {
- my ($name,$url)=split(/\:/,$resources[$_]);
+ my ($name,$url)=split(/\:/,$LONCAPA::map::resources[$_]);
unless ($name) { $name=(split(/\//,$url))[-1]; }
unless ($name) { $name='EMPTY'; }
+ $name = &LONCAPA::map::qtescape($name);
+ $url = &LONCAPA::map::qtescape($url);
$targetdetail.='&'.&escape($name).'='.
&escape($url);
$idx++;
- $name=~s/\:/\:/g;
+ $name = &HTML::Entities::encode($name,'\'"<>&');
'';
- } @order);
+ } @LONCAPA::map::order);
# ----------------------------------------------------- Start simple RAT screen
my $editscript=&editscript('simple');
@@ -1037,6 +485,7 @@ sub smpedt {
'nt' => 'New Title',
'se' => 'Search',
'im' => 'Import',
+ 'bk' => 'Import Bookmarks',
'vi' => 'View',
'lm' => 'Load Map',
'ds' => 'Discard Selected',
@@ -1061,8 +510,6 @@ sub smpedt {
function openview(entry) {
var url=unescape((entry.split('='))[1]);
var parts=new Array;
- parts=url.split(':');
- url=parts.join(':');
if (url) { open(url,'cat'); }
}
@@ -1081,12 +528,6 @@ sub smpedt {
var entry=(document.forms.simpleedit.targetdetail.value.split('&'))
[selidx];
var oldname=unescape((entry.split('='))[0]);
- var nameparts=oldname.split(':');
- oldname=unescape(nameparts.join(':'));
- nameparts=oldname.split('"');
- oldname=unescape(nameparts.join('"'));
- nameparts=oldname.split(''');
- oldname=unescape(nameparts.join("'"));
newtitle=prompt('$lt{'nt'}',oldname);
if (newtitle) {
document.forms.simpleedit.renameres.value=1;
@@ -1100,10 +541,9 @@ sub smpedt {
ENDJS
my $start_page = &Apache::loncommon::start_page(undef,$js).
- &Apache::loncommon::help_open_menu('',
- 'Sequence_Simple_Editor_Creation',
+ &Apache::loncommon::help_open_menu('Sequence_Simple_Editor_Creation',
'Sequence_Simple_Editor_Creation',
- '',6,'RAT');
+ 6,'RAT');
my $end_page = &Apache::loncommon::end_page();
$r->print(<
+"javascript:impfortarget.value=1;groupopen(0,1,1);" value="$lt{'bk'}">
+
$lt{'as'}
@@ -1151,7 +593,7 @@ $lt{'as'}
-