[BACK]Return to lond CVS log [TXT] [DIR] Up to [LON-CAPA] / loncom

Diff for /loncom/lond between versions 1.139 and 1.154

version 1.139, 2003/08/25 15:33:47 version 1.154, 2003/10/08 20:29:46
Line 57 Line 57
 #      Management functions supported include:  #      Management functions supported include:
 #       - pushing /home/httpd/lonTabs/hosts.tab  #       - pushing /home/httpd/lonTabs/hosts.tab
 #       - pushing /home/httpd/lonTabs/domain.tab  #       - pushing /home/httpd/lonTabs/domain.tab
 ###  # 09/08/2003 Ron Fox:  Told lond to take care of change logging so we
   #      don't have to remember it:
   #
   
   
 use strict;  use strict;
 use lib '/home/httpd/lib/perl/';  use lib '/home/httpd/lib/perl/';
Line 75  use Authen::Krb4; Line 78  use Authen::Krb4;
 use Authen::Krb5;  use Authen::Krb5;
 use lib '/home/httpd/lib/perl/';  use lib '/home/httpd/lib/perl/';
 use localauth;  use localauth;
   use File::Copy;
   
 my $DEBUG = 0;       # Non zero to enable debug log entries.  my $DEBUG = 0;       # Non zero to enable debug log entries.
   
Line 87  my $currenthostid; Line 91  my $currenthostid;
 my $currentdomainid;  my $currentdomainid;
   
 my $client;  my $client;
   my $clientip;
   
 my $server;  my $server;
 my $thisserver;  my $thisserver;
   
 my %hostid;  my %hostid;
 my %hostdom;  my %hostdom;
 my %hostip;  my %hostip;
   my %perlvar; # Will have the apache conf defined perl vars.
   
 #  #
 #  The array below are password error strings."  #  The array below are password error strings."
Line 122  my @adderrors    = ("ok", Line 129  my @adderrors    = ("ok",
     "lcuseradd Incorrect number of stdinput lines, must be 3",      "lcuseradd Incorrect number of stdinput lines, must be 3",
     "lcuseradd Too many other simultaneous pwd changes in progress",      "lcuseradd Too many other simultaneous pwd changes in progress",
     "lcuseradd User does not exist",      "lcuseradd User does not exist",
     "lcuseradd Unabel to mak ewww member of users's group",      "lcuseradd Unable to make www member of users's group",
     "lcuseradd Unable to su to root",      "lcuseradd Unable to su to root",
     "lcuseradd Unable to set password",      "lcuseradd Unable to set password",
     "lcuseradd Usrname has invbalid charcters",      "lcuseradd Usrname has invalid characters",
     "lcuseradd Password has an invalid character",      "lcuseradd Password has an invalid character",
     "lcuseradd User already exists",      "lcuseradd User already exists",
     "lcuseradd Could not add user.",      "lcuseradd Could not add user.",
Line 133  my @adderrors    = ("ok", Line 140  my @adderrors    = ("ok",
   
   
 #  #
   #   GetCertificate: Given a transaction that requires a certificate,
   #   this function will extract the certificate from the transaction
   #   request.  Note that at this point, the only concept of a certificate
   #   is the hostname to which we are connected.
   #
   #   Parameter:
   #      request   - The request sent by our client (this parameterization may
   #                  need to change when we really use a certificate granting
   #                  authority.
   #
   sub GetCertificate {
       my $request = shift;
   
       return $clientip;
   }
   
   
   #
   #  ValidManager: Determines if a given certificate represents a valid manager.
   #                in this primitive implementation, the 'certificate' is
   #                just the connecting loncapa client name.  This is checked
   #                against a valid client list in the configuration.
   #
   #                  
   sub ValidManager {
       my $certificate = shift; 
   
       my $hostentry   = $hostid{$certificate};
       if ($hostentry ne undef) {
    &logthis('<font color="yellow">Authenticating manager'.
    " $hostentry</font>");
    return 1;
       } else {
    &logthis('<font color="red"> Failed manager authentication '.
    "$certificate </font>");
       }
   }
   #
   #  CopyFile:  Called as part of the process of installing a 
   #             new configuration file.  This function copies an existing
   #             file to a backup file.
   # Parameters:
   #     oldfile  - Name of the file to backup.
   #     newfile  - Name of the backup file.
   # Return:
   #     0   - Failure (errno has failure reason).
   #     1   - Success.
   #
   sub CopyFile {
       my $oldfile = shift;
       my $newfile = shift;
   
       #  The file must exist:
   
       if(-e $oldfile) {
   
    # Read the old file.
   
    my $oldfh = IO::File->new("< $oldfile");
    if(!$oldfh) {
       return 0;
    }
    my @contents = <$oldfh>;  # Suck in the entire file.
   
    # write the backup file:
   
    my $newfh = IO::File->new("> $newfile");
    if(!(defined $newfh)){
       return 0;
    }
    my $lines = scalar @contents;
    for (my $i =0; $i < $lines; $i++) {
       print $newfh ($contents[$i]);
    }
   
    $oldfh->close;
    $newfh->close;
   
    chmod(0660, $newfile);
   
    return 1;
       
       } else {
    return 0;
       }
   }
   
   #
   #   InstallFile: Called to install an administrative file:
   #       - The file is created with <name>.tmp
   #       - The <name>.tmp file is then mv'd to <name>
   #   This lugubrious procedure is done to ensure that we are never without
   #   a valid, even if dated, version of the file regardless of who crashes
   #   and when the crash occurs.
   #
   #  Parameters:
   #       Name of the file
   #       File Contents.
   #  Return:
   #      nonzero - success.
   #      0       - failure and $! has an errno.
   #
   sub InstallFile {
       my $Filename = shift;
       my $Contents = shift;
       my $TempFile = $Filename.".tmp";
   
       #  Open the file for write:
   
       my $fh = IO::File->new("> $TempFile"); # Write to temp.
       if(!(defined $fh)) {
    &logthis('<font color="red"> Unable to create '.$TempFile."</font>");
    return 0;
       }
       #  write the contents of the file:
   
       print $fh ($Contents); 
       $fh->close; # In case we ever have a filesystem w. locking
   
       chmod(0660, $TempFile);
   
       # Now we can move install the file in position.
       
       move($TempFile, $Filename);
   
       return 1;
   }
   
   #
   #   PushFile:  Called to do an administrative push of a file.
   #              - Ensure the file being pushed is one we support.
   #              - Backup the old file to <filename.saved>
   #              - Separate the contents of the new file out from the
   #                rest of the request.
   #              - Write the new file.
   #  Parameter:
   #     Request - The entire user request.  This consists of a : separated
   #               string pushfile:tablename:contents.
   #     NOTE:  The contents may have :'s in it as well making things a bit
   #            more interesting... but not much.
   #  Returns:
   #     String to send to client ("ok" or "refused" if bad file).
   #
   sub PushFile {
       my $request = shift;    
       my ($command, $filename, $contents) = split(":", $request, 3);
       
       #  At this point in time, pushes for only the following tables are
       #  supported:
       #   hosts.tab  ($filename eq host).
       #   domain.tab ($filename eq domain).
       # Construct the destination filename or reject the request.
       #
       # lonManage is supposed to ensure this, however this session could be
       # part of some elaborate spoof that managed somehow to authenticate.
       #
   
       my $tablefile = $perlvar{'lonTabDir'}.'/'; # need to precede with dir.
       if ($filename eq "host") {
    $tablefile .= "hosts.tab";
       } elsif ($filename eq "domain") {
    $tablefile .= "domain.tab";
       } else {
    return "refused";
       }
       #
       # >copy< the old table to the backup table
       #        don't rename in case system crashes/reboots etc. in the time
       #        window between a rename and write.
       #
       my $backupfile = $tablefile;
       $backupfile    =~ s/\.tab$/.old/;
       if(!CopyFile($tablefile, $backupfile)) {
    &logthis('<font color="green"> CopyFile from '.$tablefile." to ".$backupfile." failed </font>");
    return "error:$!";
       }
       &logthis('<font color="green"> Pushfile: backed up '
       .$tablefile." to $backupfile</font>");
       
       #  Install the new file:
   
       if(!InstallFile($tablefile, $contents)) {
    &logthis('<font color="red"> Pushfile: unable to install '
    .$tablefile." $! </font>");
    return "error:$!";
       }
       else {
    &logthis('<font color="green"> Installed new '.$tablefile
    ."</font>");
   
       }
   
   
       #  Indicate success:
    
       return "ok";
   
   }
   
   #
   #  Called to re-init either lonc or lond.
   #
   #  Parameters:
   #    request   - The full request by the client.  This is of the form
   #                reinit:<process>  
   #                where <process> is allowed to be either of 
   #                lonc or lond
   #
   #  Returns:
   #     The string to be sent back to the client either:
   #   ok         - Everything worked just fine.
   #   error:why  - There was a failure and why describes the reason.
   #
   #
   sub ReinitProcess {
       my $request = shift;
   
   
       # separate the request (reinit) from the process identifier and
       # validate it producing the name of the .pid file for the process.
       #
       #
       my ($junk, $process) = split(":", $request);
       my $processpidfile = $perlvar{'lonDaemons'}.'/logs/';
       if($process eq 'lonc') {
    $processpidfile = $processpidfile."lonc.pid";
    if (!open(PIDFILE, "< $processpidfile")) {
       return "error:Open failed for $processpidfile";
    }
    my $loncpid = <PIDFILE>;
    close(PIDFILE);
    logthis('<font color="red"> Reinitializing lonc pid='.$loncpid
    ."</font>");
    kill("USR2", $loncpid);
       } elsif ($process eq 'lond') {
    logthis('<font color="red"> Reinitializing self (lond) </font>');
    &UpdateHosts; # Lond is us!!
       } else {
    &logthis('<font color="yellow" Invalid reinit request for '.$process
    ."</font>");
    return "error:Invalid process identifier $process";
       }
       return 'ok';
   }
   
   #
 #  Convert an error return code from lcpasswd to a string value.  #  Convert an error return code from lcpasswd to a string value.
 #  #
 sub lcpasswdstrerror {  sub lcpasswdstrerror {
Line 182  $SIG{__DIE__}=\&catchexception; Line 435  $SIG{__DIE__}=\&catchexception;
 # ---------------------------------- Read loncapa_apache.conf and loncapa.conf  # ---------------------------------- Read loncapa_apache.conf and loncapa.conf
 &status("Read loncapa.conf and loncapa_apache.conf");  &status("Read loncapa.conf and loncapa_apache.conf");
 my $perlvarref=LONCAPA::Configuration::read_conf('loncapa.conf');  my $perlvarref=LONCAPA::Configuration::read_conf('loncapa.conf');
 my %perlvar=%{$perlvarref};  %perlvar=%{$perlvarref};
 undef $perlvarref;  undef $perlvarref;
   
 # ----------------------------- Make sure this process is running from user=www  # ----------------------------- Make sure this process is running from user=www
Line 208  if (-e $pidfile) { Line 461  if (-e $pidfile) {
   
 # ------------------------------------------------------------- Read hosts file  # ------------------------------------------------------------- Read hosts file
   
 open (CONFIG,"$perlvar{'lonTabDir'}/hosts.tab") || die "Can't read host file";  
   
 while (my $configline=<CONFIG>) {  
     my ($id,$domain,$role,$name,$ip)=split(/:/,$configline);  
     chomp($ip); $ip=~s/\D+$//;  
     $hostid{$ip}=$id;  
     $hostdom{$id}=$domain;  
     $hostip{$id}=$ip;  
     if ($id eq $perlvar{'lonHostID'}) { $thisserver=$name; }  
 }  
 close(CONFIG);  
   
 # establish SERVER socket, bind and listen.  # establish SERVER socket, bind and listen.
 $server = IO::Socket::INET->new(LocalPort => $perlvar{'londPort'},  $server = IO::Socket::INET->new(LocalPort => $perlvar{'londPort'},
Line 267  sub HUPSMAN {                      # sig Line 510  sub HUPSMAN {                      # sig
     exec("$execdir/lond");         # here we go again      exec("$execdir/lond");         # here we go again
 }  }
   
   #
   #    Kill off hashes that describe the host table prior to re-reading it.
   #    Hashes affected are:
   #       %hostid, %hostdom %hostip
   #
   sub KillHostHashes {
       foreach my $key (keys %hostid) {
    delete $hostid{$key};
       }
       foreach my $key (keys %hostdom) {
    delete $hostdom{$key};
       }
       foreach my $key (keys %hostip) {
    delete $hostip{$key};
       }
   }
   #
   #   Read in the host table from file and distribute it into the various hashes:
   #
   #    - %hostid  -  Indexed by IP, the loncapa hostname.
   #    - %hostdom -  Indexed by  loncapa hostname, the domain.
   #    - %hostip  -  Indexed by hostid, the Ip address of the host.
   sub ReadHostTable {
   
       open (CONFIG,"$perlvar{'lonTabDir'}/hosts.tab") || die "Can't read host file";
       
       while (my $configline=<CONFIG>) {
    my ($id,$domain,$role,$name,$ip)=split(/:/,$configline);
    chomp($ip); $ip=~s/\D+$//;
    $hostid{$ip}=$id;
    $hostdom{$id}=$domain;
    $hostip{$id}=$ip;
    if ($id eq $perlvar{'lonHostID'}) { $thisserver=$name; }
       }
       close(CONFIG);
   }
   #
   #  Reload the Apache daemon's state.
   #  This is done by invoking /home/httpd/perl/apachereload
   #  a setuid perl script that can be root for us to do this job.
   #
   sub ReloadApache {
       my $execdir = $perlvar{'lonDaemons'};
       my $script  = $execdir."/apachereload";
       system($script);
   }
   
   #
   #   Called in response to a USR2 signal.
   #   - Reread hosts.tab
   #   - All children connected to hosts that were removed from hosts.tab
   #     are killed via SIGINT
   #   - All children connected to previously existing hosts are sent SIGUSR1
   #   - Our internal hosts hash is updated to reflect the new contents of
   #     hosts.tab causing connections from hosts added to hosts.tab to
   #     now be honored.
   #
   sub UpdateHosts {
       logthis('<font color="blue"> Updating connections </font>');
       #
       #  The %children hash has the set of IP's we currently have children
       #  on.  These need to be matched against records in the hosts.tab
       #  Any ip's no longer in the table get killed off they correspond to
       #  either dropped or changed hosts.  Note that the re-read of the table
       #  will take care of new and changed hosts as connections come into being.
   
   
       KillHostHashes;
       ReadHostTable;
   
       foreach my $child (keys %children) {
    my $childip = $children{$child};
    if(!$hostid{$childip}) {
       logthis('<font color="blue"> UpdateHosts killing child '
       ." $child for ip $childip </font>");
       kill('INT', $child);
    } else {
       logthis('<font color="green"> keeping child for ip '
       ." $childip (pid=$child) </font>");
    }
       }
       ReloadApache;
   }
   
   
 sub checkchildren {  sub checkchildren {
     &initnewstatus();      &initnewstatus();
     &logstatus();      &logstatus();
Line 298  sub checkchildren { Line 626  sub checkchildren {
         }          }
     }      }
     $SIG{ALRM} = 'DEFAULT';      $SIG{ALRM} = 'DEFAULT';
     $SIG{__DIE__} = \&cathcexception;      $SIG{__DIE__} = \&catchcexception;
 }  }
   
 # --------------------------------------------------------------------- Logging  # --------------------------------------------------------------------- Logging
Line 509  $SIG{CHLD} = \&REAPER; Line 837  $SIG{CHLD} = \&REAPER;
 $SIG{INT}  = $SIG{TERM} = \&HUNTSMAN;  $SIG{INT}  = $SIG{TERM} = \&HUNTSMAN;
 $SIG{HUP}  = \&HUPSMAN;  $SIG{HUP}  = \&HUPSMAN;
 $SIG{USR1} = \&checkchildren;  $SIG{USR1} = \&checkchildren;
   $SIG{USR2} = \&UpdateHosts;
   
   #  Read the host hashes:
   
   ReadHostTable;
   
 # --------------------------------------------------------------  # --------------------------------------------------------------
 #   Accept connections.  When a connection comes in, it is validated  #   Accept connections.  When a connection comes in, it is validated
Line 534  sub make_new_child { Line 865  sub make_new_child {
     sigprocmask(SIG_BLOCK, $sigset)      sigprocmask(SIG_BLOCK, $sigset)
         or die "Can't block SIGINT for fork: $!\n";          or die "Can't block SIGINT for fork: $!\n";
   
     my $clientip;  
     die "fork: $!" unless defined ($pid = fork);      die "fork: $!" unless defined ($pid = fork);
   
       $client->sockopt(SO_KEEPALIVE, 1); # Enable monitoring of
                                  # connection liveness.
   
       #
       #  Figure out who we're talking to so we can record the peer in 
       #  the pid hash.
       #
       my $caller = getpeername($client);
       my ($port,$iaddr)=unpack_sockaddr_in($caller);
       $clientip=inet_ntoa($iaddr);
           
     if ($pid) {      if ($pid) {
         # Parent records the child's birth and returns.          # Parent records the child's birth and returns.
         sigprocmask(SIG_UNBLOCK, $sigset)          sigprocmask(SIG_UNBLOCK, $sigset)
             or die "Can't unblock SIGINT for fork: $!\n";              or die "Can't unblock SIGINT for fork: $!\n";
         $children{$pid} = 1;          $children{$pid} = $clientip;
         $children++;          $children++;
         &status('Started child '.$pid);          &status('Started child '.$pid);
         return;          return;
Line 568  sub make_new_child { Line 909  sub make_new_child {
 # =============================================================================  # =============================================================================
             # do something with the connection              # do something with the connection
 # -----------------------------------------------------------------------------  # -----------------------------------------------------------------------------
     $client->sockopt(SO_KEEPALIVE, 1);# Enable monitoring of   # see if we know client and check for spoof IP by challenge
                                       # connection liveness.  
             # see if we know client and check for spoof IP by challenge  
  my $caller = getpeername($client);  
             my ($port,$iaddr)=unpack_sockaddr_in($caller);  
             $clientip=inet_ntoa($iaddr);  
             my $clientrec=($hostid{$clientip} ne undef);              my $clientrec=($hostid{$clientip} ne undef);
             &logthis(              &logthis(
 "<font color=yellow>INFO: Connection, $clientip ($hostid{$clientip})</font>"  "<font color=yellow>INFO: Connection, $clientip ($hostid{$clientip})</font>"
Line 703  sub make_new_child { Line 1040  sub make_new_child {
      }       }
 #--------------------------------------------------------------------- pushfile  #--------------------------------------------------------------------- pushfile
    } elsif($userinput =~ /^pushfile/) {      } elsif($userinput =~ /^pushfile/) { 
        print $client "ok\n";         if($wasenc == 1) {
      my $cert = GetCertificate($userinput);
      if(ValidManager($cert)) {
          my $reply = PushFile($userinput);
          print $client "$reply\n";
      } else {
          print $client "refused\n";
      } 
          } else {
      print $client "refused\n";
          }
 #--------------------------------------------------------------------- reinit  #--------------------------------------------------------------------- reinit
    } elsif($userinput =~ /^reinit/) {     } elsif($userinput =~ /^reinit/) {
        print $client "ok\n";         if ($wasenc == 1) {
      my $cert = GetCertificate($userinput);
      if(ValidManager($cert)) {
          chomp($userinput);
          my $reply = ReinitProcess($userinput);
          print $client  "$reply\n";
      } else {
          print $client "refused\n";
      }
          } else {
      print $client "refused\n";
          }
 # ------------------------------------------------------------------------ auth  # ------------------------------------------------------------------------ auth
                    } elsif ($userinput =~ /^auth/) {                     } elsif ($userinput =~ /^auth/) {
      if ($wasenc==1) {       if ($wasenc==1) {
Line 1008  sub make_new_child { Line 1366  sub make_new_child {
                        }                         }
 # -------------------------------------- fetch a user file from a remote server  # -------------------------------------- fetch a user file from a remote server
                    } elsif ($userinput =~ /^fetchuserfile/) {                     } elsif ($userinput =~ /^fetchuserfile/) {
                       my ($cmd,$fname)=split(/:/,$userinput);         my ($cmd,$fname)=split(/:/,$userinput);
       my ($udom,$uname,$ufile)=split(/\//,$fname);         my ($udom,$uname,$ufile)=split(/\//,$fname);
                       my $udir=propath($udom,$uname).'/userfiles';         my $udir=propath($udom,$uname).'/userfiles';
                       unless (-e $udir) { mkdir($udir,0770); }         unless (-e $udir) { mkdir($udir,0770); }
                        if (-e $udir) {                         if (-e $udir) {
                        $ufile=~s/^[\.\~]+//;     $ufile=~s/^[\.\~]+//;
                        $ufile=~s/\///g;     $ufile=~s/\///g;
                        my $transname=$udir.'/'.$ufile;     my $destname=$udir.'/'.$ufile;
                        my $remoteurl='http://'.$clientip.'/userfiles/'.$fname;     my $transname=$udir.'/'.$ufile.'.in.transit';
                              my $response;     my $remoteurl='http://'.$clientip.'/userfiles/'.$fname;
                               {     my $response;
                              my $ua=new LWP::UserAgent;     {
                              my $request=new HTTP::Request('GET',"$remoteurl");         my $ua=new LWP::UserAgent;
                              $response=$ua->request($request,$transname);         my $request=new HTTP::Request('GET',"$remoteurl");
       }         $response=$ua->request($request,$transname);
                              if ($response->is_error()) {     }
  unlink($transname);     if ($response->is_error()) {
                                  my $message=$response->status_line;         unlink($transname);
                                  &logthis(         my $message=$response->status_line;
                                   "LWP GET: $message for $fname ($remoteurl)");         &logthis("LWP GET: $message for $fname ($remoteurl)");
  print $client "failed\n";         print $client "failed\n";
                              } else {     } else {
                                  print $client "ok\n";         if (!rename($transname,$destname)) {
                              }     &logthis("Unable to move $transname to $destname");
                      } else {     unlink($transname);
                        print $client "not_home\n";     print $client "failed\n";
                      }          } else {
      print $client "ok\n";
          }
      }
          } else {
      print $client "not_home\n";
          }
 # ------------------------------------------ authenticate access to a user file  # ------------------------------------------ authenticate access to a user file
                    } elsif ($userinput =~ /^tokenauthuserfile/) {                     } elsif ($userinput =~ /^tokenauthuserfile/) {
                        my ($cmd,$fname,$session)=split(/:/,$userinput);                         my ($cmd,$fname,$session)=split(/:/,$userinput);
Line 1918  sub chatadd { Line 2282  sub chatadd {
     my %hash;      my %hash;
     my $proname=&propath($cdom,$cname);      my $proname=&propath($cdom,$cname);
     my @entries=();      my @entries=();
       my $time=time;
     if (tie(%hash,'GDBM_File',"$proname/nohist_chatroom.db",      if (tie(%hash,'GDBM_File',"$proname/nohist_chatroom.db",
     &GDBM_WRCREAT(),0640)) {      &GDBM_WRCREAT(),0640)) {
  @entries=map { $_.':'.$hash{$_} } sort keys %hash;   @entries=map { $_.':'.$hash{$_} } sort keys %hash;
  my $time=time;  
  my ($lastid)=($entries[$#entries]=~/^(\w+)\:/);   my ($lastid)=($entries[$#entries]=~/^(\w+)\:/);
  my ($thentime,$idnum)=split(/\_/,$lastid);   my ($thentime,$idnum)=split(/\_/,$lastid);
  my $newid=$time.'_000000';   my $newid=$time.'_000000';
Line 1941  sub chatadd { Line 2305  sub chatadd {
  }   }
  untie %hash;   untie %hash;
     }      }
       {
    my $hfh;
    if ($hfh=IO::File->new(">>$proname/chatroom.log")) { 
       print $hfh "$time:".&unescape($newchat)."\n";
    }
       }
 }  }
   
 sub unsub {  sub unsub {
Line 2259  each connection is logged. Line 2629  each connection is logged.
   
 =item *  =item *
   
   SIGUSR2
   
   Parent Signal assignment:
       $SIG{USR2} = \&UpdateHosts
   
   Child signal assignment:
       NONE
   
   
   =item *
   
 SIGCHLD  SIGCHLD
   
 Parent signal assignment:  Parent signal assignment:
Removed from v.1.139  
changed lines
  Added in v.1.154

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>