[BACK]Return to lond CVS log [TXT] [DIR] Up to [LON-CAPA] / loncom

Diff for /loncom/lond between versions 1.141 and 1.158

version 1.141, 2003/09/08 10:32:07 version 1.158, 2003/10/21 09:14:31
Line 59 Line 59
 #       - pushing /home/httpd/lonTabs/domain.tab  #       - pushing /home/httpd/lonTabs/domain.tab
 # 09/08/2003 Ron Fox:  Told lond to take care of change logging so we  # 09/08/2003 Ron Fox:  Told lond to take care of change logging so we
 #      don't have to remember it:  #      don't have to remember it:
 # $Log$  #
 # Revision 1.141  2003/09/08 10:32:07  foxr  # Change Log:
 # Added PushFile sub This sub oversees the push of a new configuration table file  #   $Log$
 # Currently supported files are:  #   Revision 1.158  2003/10/21 09:14:31  foxr
 # - hosts.tab   (transaction pushfile:hosts:contents)  #   Re-install $Log$ in comment header to support automatic change logging.
 # - domain.tab  (transaction pushfile:domain:contents)  #
 #  #
   
   
Line 84  use Authen::Krb4; Line 84  use Authen::Krb4;
 use Authen::Krb5;  use Authen::Krb5;
 use lib '/home/httpd/lib/perl/';  use lib '/home/httpd/lib/perl/';
 use localauth;  use localauth;
   use File::Copy;
   
 my $DEBUG = 0;       # Non zero to enable debug log entries.  my $DEBUG = 0;       # Non zero to enable debug log entries.
   
Line 104  my $thisserver; Line 105  my $thisserver;
 my %hostid;  my %hostid;
 my %hostdom;  my %hostdom;
 my %hostip;  my %hostip;
   my %managers; # If defined $managers{hostname} is a manager
 my %perlvar; # Will have the apache conf defined perl vars.  my %perlvar; # Will have the apache conf defined perl vars.
   
 #  #
Line 134  my @adderrors    = ("ok", Line 136  my @adderrors    = ("ok",
     "lcuseradd Incorrect number of stdinput lines, must be 3",      "lcuseradd Incorrect number of stdinput lines, must be 3",
     "lcuseradd Too many other simultaneous pwd changes in progress",      "lcuseradd Too many other simultaneous pwd changes in progress",
     "lcuseradd User does not exist",      "lcuseradd User does not exist",
     "lcuseradd Unabel to mak ewww member of users's group",      "lcuseradd Unable to make www member of users's group",
     "lcuseradd Unable to su to root",      "lcuseradd Unable to su to root",
     "lcuseradd Unable to set password",      "lcuseradd Unable to set password",
     "lcuseradd Usrname has invbalid charcters",      "lcuseradd Usrname has invalid characters",
     "lcuseradd Password has an invalid character",      "lcuseradd Password has an invalid character",
     "lcuseradd User already exists",      "lcuseradd User already exists",
     "lcuseradd Could not add user.",      "lcuseradd Could not add user.",
Line 160  sub GetCertificate { Line 162  sub GetCertificate {
   
     return $clientip;      return $clientip;
 }  }
   #
   #   ReadManagerTable: Reads in the current manager table. For now this is
   #                     done on each manager authentication because:
   #                     - These authentications are not frequent
   #                     - This allows dynamic changes to the manager table
   #                       without the need to signal to the lond.
   #
   
   sub ReadManagerTable {
   
       #   Clean out the old table first..
   
       foreach my $key (keys %managers) {
    delete $managers{$key};
       }
   
       my $tablename = $perlvar{'lonTabDir'}."/managers.tab";
       if (!open (MANAGERS, $tablename)) {
    logthis('<font color="red">No manager table.  Nobody can manage!!</font>');
    return;
       }
       while(my $host = <MANAGERS>) {
    chomp($host);
    if (!defined $hostip{$host}) {
       logthis('<font color="red"> manager '.$host.
       " not in hosts.tab, rejected as manager</font>");
    } else {
       $managers{$host} = $hostip{$host}; # Whatever for now.
    }
       }
   }
   
 #  #
 #  ValidManager: Determines if a given certificate represents a valid manager.  #  ValidManager: Determines if a given certificate represents a valid manager.
Line 172  sub GetCertificate { Line 204  sub GetCertificate {
 sub ValidManager {  sub ValidManager {
     my $certificate = shift;       my $certificate = shift; 
   
     my $hostentry   = $hostid{$certificate};      ReadManagerTable;
     if ($hostentry ne undef) {  
  &logthis('<font color="yellow">Authenticating manager'.      my $hostname   = $hostid{$certificate};
  " $hostentry</font>");  
  return 1;  
       if ($hostname ne undef) {
    if($managers{$hostname} ne undef) {
       &logthis('<font color="yellow">Authenticating manager'.
        " $hostname</font>");
       return 1;
    } else {
       &logthis('<font color="red" failed manager authentication '.
        $hostname." is not a valid manager host</font>");
       return 0;
    }
     } else {      } else {
  &logthis('<font color="red"> Failed manager authentication '.   &logthis('<font color="red"> Failed manager authentication '.
  "$certificate </font>");   "$certificate </font>");
    return 0;
     }      }
 }  }
 #  #
   #  CopyFile:  Called as part of the process of installing a 
   #             new configuration file.  This function copies an existing
   #             file to a backup file.
   # Parameters:
   #     oldfile  - Name of the file to backup.
   #     newfile  - Name of the backup file.
   # Return:
   #     0   - Failure (errno has failure reason).
   #     1   - Success.
   #
   sub CopyFile {
       my $oldfile = shift;
       my $newfile = shift;
   
       #  The file must exist:
   
       if(-e $oldfile) {
   
    # Read the old file.
   
    my $oldfh = IO::File->new("< $oldfile");
    if(!$oldfh) {
       return 0;
    }
    my @contents = <$oldfh>;  # Suck in the entire file.
   
    # write the backup file:
   
    my $newfh = IO::File->new("> $newfile");
    if(!(defined $newfh)){
       return 0;
    }
    my $lines = scalar @contents;
    for (my $i =0; $i < $lines; $i++) {
       print $newfh ($contents[$i]);
    }
   
    $oldfh->close;
    $newfh->close;
   
    chmod(0660, $newfile);
   
    return 1;
       
       } else {
    return 0;
       }
   }
   #
   #  Host files are passed out with externally visible host IPs.
   #  If, for example, we are behind a fire-wall or NAT host, our 
   #  internally visible IP may be different than the externally
   #  visible IP.  Therefore, we always adjust the contents of the
   #  host file so that the entry for ME is the IP that we believe
   #  we have.  At present, this is defined as the entry that
   #  DNS has for us.  If by some chance we are not able to get a
   #  DNS translation for us, then we assume that the host.tab file
   #  is correct.  
   #    BUGBUGBUG - in the future, we really should see if we can
   #       easily query the interface(s) instead.
   # Parameter(s):
   #     contents    - The contents of the host.tab to check.
   # Returns:
   #     newcontents - The adjusted contents.
   #
   #
   sub AdjustHostContents {
       my $contents  = shift;
       my $adjusted;
       my $me        = $perlvar{'lonHostID'};
   
       foreach my $line (split(/\n/,$contents)) {
    if(!(($line eq "") || ($line =~ /^ *\#/) || ($line =~ /^ *$/))) {
       chomp($line);
       my ($id,$domain,$role,$name,$ip,$maxcon,$idleto,$mincon)=split(/:/,$line);
       if ($id eq $me) {
    open(PIPE, " /usr/bin/host $name |") || die "Cant' make host pipeline";
    my $hostinfo = <PIPE>;
    close PIPE;
   
    my ($hostname, $has, $address, $ipnew) = split(/ /,$hostinfo);
    &logthis('<font color="green">'.
    "hostname = $hostname me = $me, name = $name   actual ip = $ipnew </font>");
   
    if ($hostname eq $name) { # Lookup succeeded..
       &logthis('<font color="green"> look up ok <font>');
       $ip = $ipnew;
    } else {
       &logthis('<font color="green"> Lookup failed: '
        .$hostname." ne $name </font>");
    }
    #  Reconstruct the host line and append to adjusted:
   
    my $newline = "$id:$domain:$role:$name:$ip";
    if($maxcon ne "") { # Not all hosts have loncnew tuning params
       $newline .= ":$maxcon:$idleto:$mincon";
    }
    $adjusted .= $newline."\n";
   
       } else { # Not me, pass unmodified.
    $adjusted .= $line."\n";
       }
    } else {                  # Blank or comment never re-written.
       $adjusted .= $line."\n"; # Pass blanks and comments as is.
    }
       }
       return $adjusted;
   }
   #
   #   InstallFile: Called to install an administrative file:
   #       - The file is created with <name>.tmp
   #       - The <name>.tmp file is then mv'd to <name>
   #   This lugubrious procedure is done to ensure that we are never without
   #   a valid, even if dated, version of the file regardless of who crashes
   #   and when the crash occurs.
   #
   #  Parameters:
   #       Name of the file
   #       File Contents.
   #  Return:
   #      nonzero - success.
   #      0       - failure and $! has an errno.
   #
   sub InstallFile {
       my $Filename = shift;
       my $Contents = shift;
       my $TempFile = $Filename.".tmp";
   
       #  Open the file for write:
   
       my $fh = IO::File->new("> $TempFile"); # Write to temp.
       if(!(defined $fh)) {
    &logthis('<font color="red"> Unable to create '.$TempFile."</font>");
    return 0;
       }
       #  write the contents of the file:
   
       print $fh ($Contents); 
       $fh->close; # In case we ever have a filesystem w. locking
   
       chmod(0660, $TempFile);
   
       # Now we can move install the file in position.
       
       move($TempFile, $Filename);
   
       return 1;
   }
   
   #
 #   PushFile:  Called to do an administrative push of a file.  #   PushFile:  Called to do an administrative push of a file.
 #              - Ensure the file being pushed is one we support.  #              - Ensure the file being pushed is one we support.
 #              - Backup the old file to <filename.saved>  #              - Backup the old file to <filename.saved>
Line 226  sub PushFile { Line 419  sub PushFile {
     #      #
     my $backupfile = $tablefile;      my $backupfile = $tablefile;
     $backupfile    =~ s/\.tab$/.old/;      $backupfile    =~ s/\.tab$/.old/;
     # CopyFile($tablefile, $backupfile);      if(!CopyFile($tablefile, $backupfile)) {
    &logthis('<font color="green"> CopyFile from '.$tablefile." to ".$backupfile." failed </font>");
    return "error:$!";
       }
     &logthis('<font color="green"> Pushfile: backed up '      &logthis('<font color="green"> Pushfile: backed up '
     .$tablefile." to $backupfile</font>");      .$tablefile." to $backupfile</font>");
           
       #  If the file being pushed is the host file, we adjust the entry for ourself so that the
       #  IP will be our current IP as looked up in dns.  Note this is only 99% good as it's possible
       #  to conceive of conditions where we don't have a DNS entry locally.  This is possible in a 
       #  network sense but it doesn't make much sense in a LonCAPA sense so we ignore (for now)
       #  that possibilty.
   
       if($filename eq "host") {
    $contents = AdjustHostContents($contents);
       }
   
     #  Install the new file:      #  Install the new file:
   
     # InstallFile($tablefile, $contents);      if(!InstallFile($tablefile, $contents)) {
    &logthis('<font color="red"> Pushfile: unable to install '
    .$tablefile." $! </font>");
    return "error:$!";
       }
       else {
    &logthis('<font color="green"> Installed new '.$tablefile
    ."</font>");
   
       }
   
   
     #  Indicate success:      #  Indicate success:
     
     return "ok";      return "ok";
   
 }  }
   
   #
   #  Called to re-init either lonc or lond.
   #
   #  Parameters:
   #    request   - The full request by the client.  This is of the form
   #                reinit:<process>  
   #                where <process> is allowed to be either of 
   #                lonc or lond
   #
   #  Returns:
   #     The string to be sent back to the client either:
   #   ok         - Everything worked just fine.
   #   error:why  - There was a failure and why describes the reason.
   #
   #
   sub ReinitProcess {
       my $request = shift;
   
   
       # separate the request (reinit) from the process identifier and
       # validate it producing the name of the .pid file for the process.
       #
       #
       my ($junk, $process) = split(":", $request);
       my $processpidfile = $perlvar{'lonDaemons'}.'/logs/';
       if($process eq 'lonc') {
    $processpidfile = $processpidfile."lonc.pid";
    if (!open(PIDFILE, "< $processpidfile")) {
       return "error:Open failed for $processpidfile";
    }
    my $loncpid = <PIDFILE>;
    close(PIDFILE);
    logthis('<font color="red"> Reinitializing lonc pid='.$loncpid
    ."</font>");
    kill("USR2", $loncpid);
       } elsif ($process eq 'lond') {
    logthis('<font color="red"> Reinitializing self (lond) </font>');
    &UpdateHosts; # Lond is us!!
       } else {
    &logthis('<font color="yellow" Invalid reinit request for '.$process
    ."</font>");
    return "error:Invalid process identifier $process";
       }
       return 'ok';
   }
   
 #  #
 #  Convert an error return code from lcpasswd to a string value.  #  Convert an error return code from lcpasswd to a string value.
 #  #
Line 315  if (-e $pidfile) { Line 578  if (-e $pidfile) {
   
 # ------------------------------------------------------------- Read hosts file  # ------------------------------------------------------------- Read hosts file
   
 open (CONFIG,"$perlvar{'lonTabDir'}/hosts.tab") || die "Can't read host file";  
   
 while (my $configline=<CONFIG>) {  
     my ($id,$domain,$role,$name,$ip)=split(/:/,$configline);  
     chomp($ip); $ip=~s/\D+$//;  
     $hostid{$ip}=$id;  
     $hostdom{$id}=$domain;  
     $hostip{$id}=$ip;  
     if ($id eq $perlvar{'lonHostID'}) { $thisserver=$name; }  
 }  
 close(CONFIG);  
   
 # establish SERVER socket, bind and listen.  # establish SERVER socket, bind and listen.
 $server = IO::Socket::INET->new(LocalPort => $perlvar{'londPort'},  $server = IO::Socket::INET->new(LocalPort => $perlvar{'londPort'},
Line 374  sub HUPSMAN {                      # sig Line 627  sub HUPSMAN {                      # sig
     exec("$execdir/lond");         # here we go again      exec("$execdir/lond");         # here we go again
 }  }
   
   #
   #    Kill off hashes that describe the host table prior to re-reading it.
   #    Hashes affected are:
   #       %hostid, %hostdom %hostip
   #
   sub KillHostHashes {
       foreach my $key (keys %hostid) {
    delete $hostid{$key};
       }
       foreach my $key (keys %hostdom) {
    delete $hostdom{$key};
       }
       foreach my $key (keys %hostip) {
    delete $hostip{$key};
       }
   }
   #
   #   Read in the host table from file and distribute it into the various hashes:
   #
   #    - %hostid  -  Indexed by IP, the loncapa hostname.
   #    - %hostdom -  Indexed by  loncapa hostname, the domain.
   #    - %hostip  -  Indexed by hostid, the Ip address of the host.
   sub ReadHostTable {
   
       open (CONFIG,"$perlvar{'lonTabDir'}/hosts.tab") || die "Can't read host file";
       
       while (my $configline=<CONFIG>) {
    my ($id,$domain,$role,$name,$ip)=split(/:/,$configline);
    chomp($ip); $ip=~s/\D+$//;
    $hostid{$ip}=$id;
    $hostdom{$id}=$domain;
    $hostip{$id}=$ip;
    if ($id eq $perlvar{'lonHostID'}) { $thisserver=$name; }
       }
       close(CONFIG);
   }
   #
   #  Reload the Apache daemon's state.
   #  This is done by invoking /home/httpd/perl/apachereload
   #  a setuid perl script that can be root for us to do this job.
   #
   sub ReloadApache {
       my $execdir = $perlvar{'lonDaemons'};
       my $script  = $execdir."/apachereload";
       system($script);
   }
   
   #
   #   Called in response to a USR2 signal.
   #   - Reread hosts.tab
   #   - All children connected to hosts that were removed from hosts.tab
   #     are killed via SIGINT
   #   - All children connected to previously existing hosts are sent SIGUSR1
   #   - Our internal hosts hash is updated to reflect the new contents of
   #     hosts.tab causing connections from hosts added to hosts.tab to
   #     now be honored.
   #
   sub UpdateHosts {
       logthis('<font color="blue"> Updating connections </font>');
       #
       #  The %children hash has the set of IP's we currently have children
       #  on.  These need to be matched against records in the hosts.tab
       #  Any ip's no longer in the table get killed off they correspond to
       #  either dropped or changed hosts.  Note that the re-read of the table
       #  will take care of new and changed hosts as connections come into being.
   
   
       KillHostHashes;
       ReadHostTable;
   
       foreach my $child (keys %children) {
    my $childip = $children{$child};
    if(!$hostid{$childip}) {
       logthis('<font color="blue"> UpdateHosts killing child '
       ." $child for ip $childip </font>");
       kill('INT', $child);
    } else {
       logthis('<font color="green"> keeping child for ip '
       ." $childip (pid=$child) </font>");
    }
       }
       ReloadApache;
   }
   
   
 sub checkchildren {  sub checkchildren {
     &initnewstatus();      &initnewstatus();
     &logstatus();      &logstatus();
Line 405  sub checkchildren { Line 743  sub checkchildren {
         }          }
     }      }
     $SIG{ALRM} = 'DEFAULT';      $SIG{ALRM} = 'DEFAULT';
     $SIG{__DIE__} = \&cathcexception;      $SIG{__DIE__} = \&catchexception;
 }  }
   
 # --------------------------------------------------------------------- Logging  # --------------------------------------------------------------------- Logging
Line 616  $SIG{CHLD} = \&REAPER; Line 954  $SIG{CHLD} = \&REAPER;
 $SIG{INT}  = $SIG{TERM} = \&HUNTSMAN;  $SIG{INT}  = $SIG{TERM} = \&HUNTSMAN;
 $SIG{HUP}  = \&HUPSMAN;  $SIG{HUP}  = \&HUPSMAN;
 $SIG{USR1} = \&checkchildren;  $SIG{USR1} = \&checkchildren;
   $SIG{USR2} = \&UpdateHosts;
   
   #  Read the host hashes:
   
   ReadHostTable;
   
 # --------------------------------------------------------------  # --------------------------------------------------------------
 #   Accept connections.  When a connection comes in, it is validated  #   Accept connections.  When a connection comes in, it is validated
Line 642  sub make_new_child { Line 983  sub make_new_child {
         or die "Can't block SIGINT for fork: $!\n";          or die "Can't block SIGINT for fork: $!\n";
   
     die "fork: $!" unless defined ($pid = fork);      die "fork: $!" unless defined ($pid = fork);
   
       $client->sockopt(SO_KEEPALIVE, 1); # Enable monitoring of
                                  # connection liveness.
   
       #
       #  Figure out who we're talking to so we can record the peer in 
       #  the pid hash.
       #
       my $caller = getpeername($client);
       my ($port,$iaddr)=unpack_sockaddr_in($caller);
       $clientip=inet_ntoa($iaddr);
           
     if ($pid) {      if ($pid) {
         # Parent records the child's birth and returns.          # Parent records the child's birth and returns.
         sigprocmask(SIG_UNBLOCK, $sigset)          sigprocmask(SIG_UNBLOCK, $sigset)
             or die "Can't unblock SIGINT for fork: $!\n";              or die "Can't unblock SIGINT for fork: $!\n";
         $children{$pid} = 1;          $children{$pid} = $clientip;
         $children++;          $children++;
         &status('Started child '.$pid);          &status('Started child '.$pid);
         return;          return;
Line 674  sub make_new_child { Line 1026  sub make_new_child {
 # =============================================================================  # =============================================================================
             # do something with the connection              # do something with the connection
 # -----------------------------------------------------------------------------  # -----------------------------------------------------------------------------
     $client->sockopt(SO_KEEPALIVE, 1);# Enable monitoring of   # see if we know client and check for spoof IP by challenge
                                       # connection liveness.  
             # see if we know client and check for spoof IP by challenge  
  my $caller = getpeername($client);  
             my ($port,$iaddr)=unpack_sockaddr_in($caller);  
             $clientip=inet_ntoa($iaddr);  
             my $clientrec=($hostid{$clientip} ne undef);              my $clientrec=($hostid{$clientip} ne undef);
             &logthis(              &logthis(
 "<font color=yellow>INFO: Connection, $clientip ($hostid{$clientip})</font>"  "<font color=yellow>INFO: Connection, $clientip ($hostid{$clientip})</font>"
Line 825  sub make_new_child { Line 1173  sub make_new_child {
        if ($wasenc == 1) {         if ($wasenc == 1) {
    my $cert = GetCertificate($userinput);     my $cert = GetCertificate($userinput);
    if(ValidManager($cert)) {     if(ValidManager($cert)) {
        print $client "ok\n";         chomp($userinput);
          my $reply = ReinitProcess($userinput);
          print $client  "$reply\n";
    } else {     } else {
        print $client "refused\n";         print $client "refused\n";
    }     }
Line 1133  sub make_new_child { Line 1483  sub make_new_child {
                        }                         }
 # -------------------------------------- fetch a user file from a remote server  # -------------------------------------- fetch a user file from a remote server
                    } elsif ($userinput =~ /^fetchuserfile/) {                     } elsif ($userinput =~ /^fetchuserfile/) {
                       my ($cmd,$fname)=split(/:/,$userinput);         my ($cmd,$fname)=split(/:/,$userinput);
       my ($udom,$uname,$ufile)=split(/\//,$fname);         my ($udom,$uname,$ufile)=split(/\//,$fname);
                       my $udir=propath($udom,$uname).'/userfiles';         my $udir=propath($udom,$uname).'/userfiles';
                       unless (-e $udir) { mkdir($udir,0770); }         unless (-e $udir) { mkdir($udir,0770); }
                        if (-e $udir) {                         if (-e $udir) {
                        $ufile=~s/^[\.\~]+//;     $ufile=~s/^[\.\~]+//;
                        $ufile=~s/\///g;     $ufile=~s/\///g;
                        my $transname=$udir.'/'.$ufile;     my $destname=$udir.'/'.$ufile;
                        my $remoteurl='http://'.$clientip.'/userfiles/'.$fname;     my $transname=$udir.'/'.$ufile.'.in.transit';
                              my $response;     my $remoteurl='http://'.$clientip.'/userfiles/'.$fname;
                               {     my $response;
                              my $ua=new LWP::UserAgent;     {
                              my $request=new HTTP::Request('GET',"$remoteurl");         my $ua=new LWP::UserAgent;
                              $response=$ua->request($request,$transname);         my $request=new HTTP::Request('GET',"$remoteurl");
       }         $response=$ua->request($request,$transname);
                              if ($response->is_error()) {     }
  unlink($transname);     if ($response->is_error()) {
                                  my $message=$response->status_line;         unlink($transname);
                                  &logthis(         my $message=$response->status_line;
                                   "LWP GET: $message for $fname ($remoteurl)");         &logthis("LWP GET: $message for $fname ($remoteurl)");
  print $client "failed\n";         print $client "failed\n";
                              } else {     } else {
                                  print $client "ok\n";         if (!rename($transname,$destname)) {
                              }     &logthis("Unable to move $transname to $destname");
                      } else {     unlink($transname);
                        print $client "not_home\n";     print $client "failed\n";
                      }          } else {
      print $client "ok\n";
          }
      }
          } else {
      print $client "not_home\n";
          }
 # ------------------------------------------ authenticate access to a user file  # ------------------------------------------ authenticate access to a user file
                    } elsif ($userinput =~ /^tokenauthuserfile/) {                     } elsif ($userinput =~ /^tokenauthuserfile/) {
                        my ($cmd,$fname,$session)=split(/:/,$userinput);                         my ($cmd,$fname,$session)=split(/:/,$userinput);
Line 2043  sub chatadd { Line 2399  sub chatadd {
     my %hash;      my %hash;
     my $proname=&propath($cdom,$cname);      my $proname=&propath($cdom,$cname);
     my @entries=();      my @entries=();
       my $time=time;
     if (tie(%hash,'GDBM_File',"$proname/nohist_chatroom.db",      if (tie(%hash,'GDBM_File',"$proname/nohist_chatroom.db",
     &GDBM_WRCREAT(),0640)) {      &GDBM_WRCREAT(),0640)) {
  @entries=map { $_.':'.$hash{$_} } sort keys %hash;   @entries=map { $_.':'.$hash{$_} } sort keys %hash;
  my $time=time;  
  my ($lastid)=($entries[$#entries]=~/^(\w+)\:/);   my ($lastid)=($entries[$#entries]=~/^(\w+)\:/);
  my ($thentime,$idnum)=split(/\_/,$lastid);   my ($thentime,$idnum)=split(/\_/,$lastid);
  my $newid=$time.'_000000';   my $newid=$time.'_000000';
Line 2066  sub chatadd { Line 2422  sub chatadd {
  }   }
  untie %hash;   untie %hash;
     }      }
       {
    my $hfh;
    if ($hfh=IO::File->new(">>$proname/chatroom.log")) { 
       print $hfh "$time:".&unescape($newchat)."\n";
    }
       }
 }  }
   
 sub unsub {  sub unsub {
Line 2384  each connection is logged. Line 2746  each connection is logged.
   
 =item *  =item *
   
   SIGUSR2
   
   Parent Signal assignment:
       $SIG{USR2} = \&UpdateHosts
   
   Child signal assignment:
       NONE
   
   
   =item *
   
 SIGCHLD  SIGCHLD
   
 Parent signal assignment:  Parent signal assignment:
Removed from v.1.141  
changed lines
  Added in v.1.158

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>