[BACK]Return to lond CVS log [TXT] [DIR] Up to [LON-CAPA] / loncom

Diff for /loncom/lond between versions 1.221 and 1.263

version 1.221, 2004/08/02 20:59:46 version 1.263, 2004/10/21 16:05:50
Line 122  my @passwderrors = ("ok", Line 122  my @passwderrors = ("ok",
    "lcpasswd Cannot set new passwd.",     "lcpasswd Cannot set new passwd.",
    "lcpasswd Username has invalid characters",     "lcpasswd Username has invalid characters",
    "lcpasswd Invalid characters in password",     "lcpasswd Invalid characters in password",
     "11", "12",     "lcpasswd User already exists", 
     "lcpasswd Password mismatch");                     "lcpasswd Something went wrong with user addition.",
       "lcpasswd Password mismatch",
       "lcpasswd Error filename is invalid");
   
   
 #  The array below are lcuseradd error strings.:  #  The array below are lcuseradd error strings.:
Line 160  sub ResetStatistics { Line 162  sub ResetStatistics {
     $Failures     = 0;      $Failures     = 0;
 }  }
   
   
   
 #------------------------------------------------------------------------  #------------------------------------------------------------------------
 #  #
 #   LocalConnection  #   LocalConnection
Line 192  sub LocalConnection { Line 192  sub LocalConnection {
  ."$clientdns ne $thisserver </font>");   ."$clientdns ne $thisserver </font>");
  close $Socket;   close $Socket;
  return undef;   return undef;
     }       }  else {
     else {  
  chomp($initcmd); # Get rid of \n in filename.   chomp($initcmd); # Get rid of \n in filename.
  my ($init, $type, $name) = split(/:/, $initcmd);   my ($init, $type, $name) = split(/:/, $initcmd);
  Debug(" Init command: $init $type $name ");   Debug(" Init command: $init $type $name ");
Line 324  sub InsecureConnection { Line 323  sub InsecureConnection {
     $answer    =~s/\W//g;      $answer    =~s/\W//g;
     if($challenge eq $answer) {      if($challenge eq $answer) {
  return 1;   return 1;
     }       } else {
     else {  
  logthis("<font color='blue'>WARNING client did not respond to challenge</font>");   logthis("<font color='blue'>WARNING client did not respond to challenge</font>");
  &status("No challenge reqply");   &status("No challenge reqply");
  return 0;   return 0;
Line 333  sub InsecureConnection { Line 331  sub InsecureConnection {
           
   
 }  }
   
 #  #
   #   Safely execute a command (as long as it's not a shel command and doesn
   #   not require/rely on shell escapes.   The function operates by doing a
   #   a pipe based fork and capturing stdout and stderr  from the pipe.
   #
   # Formal Parameters:
   #     $line                    - A line of text to be executed as a command.
   # Returns:
   #     The output from that command.  If the output is multiline the caller
   #     must know how to split up the output.
   #
   #
   sub execute_command {
       my ($line)    = @_;
       my @words     = split(/\s/, $line); # Bust the command up into words.
       my $output    = "";
   
       my $pid = open(CHILD, "-|");
       
       if($pid) { # Parent process
    Debug("In parent process for execute_command");
    my @data = <CHILD>; # Read the child's outupt...
    close CHILD;
    foreach my $output_line (@data) {
       Debug("Adding $output_line");
       $output .= $output_line; # Presumably has a \n on it.
    }
   
       } else { # Child process
    close (STDERR);
    open  (STDERR, ">&STDOUT");# Combine stderr, and stdout...
    exec(@words); # won't return.
       }
       return $output;
   }
   
   
 #   GetCertificate: Given a transaction that requires a certificate,  #   GetCertificate: Given a transaction that requires a certificate,
 #   this function will extract the certificate from the transaction  #   this function will extract the certificate from the transaction
 #   request.  Note that at this point, the only concept of a certificate  #   request.  Note that at this point, the only concept of a certificate
Line 372  sub isClient { Line 405  sub isClient {
 #                     - This allows dynamic changes to the manager table  #                     - This allows dynamic changes to the manager table
 #                       without the need to signal to the lond.  #                       without the need to signal to the lond.
 #  #
   
 sub ReadManagerTable {  sub ReadManagerTable {
   
     #   Clean out the old table first..      #   Clean out the old table first..
Line 654  sub PushFile { Line 686  sub PushFile {
  &logthis('<font color="red"> Pushfile: unable to install '   &logthis('<font color="red"> Pushfile: unable to install '
  .$tablefile." $! </font>");   .$tablefile." $! </font>");
  return "error:$!";   return "error:$!";
     }      } else {
     else {  
  &logthis('<font color="green"> Installed new '.$tablefile   &logthis('<font color="green"> Installed new '.$tablefile
  ."</font>");   ."</font>");
   
Line 1017  sub tie_user_hash { Line 1048  sub tie_user_hash {
    $how, 0640)) {     $how, 0640)) {
  # If this is a namespace for which a history is kept,   # If this is a namespace for which a history is kept,
  # make the history log entry:       # make the history log entry:    
  if (($namespace =~/^nohist\_/) && (defined($loghead))) {   if (($namespace !~/^nohist\_/) && (defined($loghead))) {
     my $args = scalar @_;      my $args = scalar @_;
     Debug(" Opening history: $namespace $args");      Debug(" Opening history: $namespace $args");
     my $hfh = IO::File->new(">>$proname/$namespace.hist");       my $hfh = IO::File->new(">>$proname/$namespace.hist"); 
Line 1034  sub tie_user_hash { Line 1065  sub tie_user_hash {
           
 }  }
   
   #   read_profile
   #
   #   Returns a set of specific entries from a user's profile file.
   #   this is a utility function that is used by both get_profile_entry and
   #   get_profile_entry_encrypted.
   #
   # Parameters:
   #    udom       - Domain in which the user exists.
   #    uname      - User's account name (loncapa account)
   #    namespace  - The profile namespace to open.
   #    what       - A set of & separated queries.
   # Returns:
   #    If all ok: - The string that needs to be shipped back to the user.
   #    If failure - A string that starts with error: followed by the failure
   #                 reason.. note that this probabyl gets shipped back to the
   #                 user as well.
   #
   sub read_profile {
       my ($udom, $uname, $namespace, $what) = @_;
       
       my $hashref = &tie_user_hash($udom, $uname, $namespace,
    &GDBM_READER());
       if ($hashref) {
           my @queries=split(/\&/,$what);
           my $qresult='';
   
    for (my $i=0;$i<=$#queries;$i++) {
       $qresult.="$hashref->{$queries[$i]}&";    # Presumably failure gives empty string.
    }
    $qresult=~s/\&$//;              # Remove trailing & from last lookup.
    if (untie %$hashref) {
       return $qresult;
    } else {
       return "error: ".($!+0)." untie (GDBM) Failed";
    }
       } else {
    if ($!+0 == 2) {
       return "error:No such file or GDBM reported bad block error";
    } else {
       return "error: ".($!+0)." tie (GDBM) Failed";
    }
       }
   
   }
 #--------------------- Request Handlers --------------------------------------------  #--------------------- Request Handlers --------------------------------------------
 #  #
 #   By convention each request handler registers itself prior to the sub   #   By convention each request handler registers itself prior to the sub 
Line 1055  sub tie_user_hash { Line 1130  sub tie_user_hash {
 #      0       - Program should exit.  #      0       - Program should exit.
 #  Side effects:  #  Side effects:
 #      Reply information is sent to the client.  #      Reply information is sent to the client.
   
 sub ping_handler {  sub ping_handler {
     my ($cmd, $tail, $client) = @_;      my ($cmd, $tail, $client) = @_;
     Debug("$cmd $tail $client .. $currenthostid:");      Debug("$cmd $tail $client .. $currenthostid:");
Line 1083  sub ping_handler { Line 1157  sub ping_handler {
 #      0       - Program should exit.  #      0       - Program should exit.
 #  Side effects:  #  Side effects:
 #      Reply information is sent to the client.  #      Reply information is sent to the client.
   
 sub pong_handler {  sub pong_handler {
     my ($cmd, $tail, $replyfd) = @_;      my ($cmd, $tail, $replyfd) = @_;
   
Line 1138  sub establish_key_handler { Line 1211  sub establish_key_handler {
 }  }
 &register_handler("ekey", \&establish_key_handler, 0, 1,1);  &register_handler("ekey", \&establish_key_handler, 0, 1,1);
   
   
 #     Handler for the load command.  Returns the current system load average  #     Handler for the load command.  Returns the current system load average
 #     to the requestor.  #     to the requestor.
 #  #
Line 1173  sub load_handler { Line 1245  sub load_handler {
         
     return 1;      return 1;
 }  }
 register_handler("load", \&load_handler, 0, 1, 0);  &register_handler("load", \&load_handler, 0, 1, 0);
   
 #  #
 #   Process the userload request.  This sub returns to the client the current  #   Process the userload request.  This sub returns to the client the current
Line 1203  sub user_load_handler { Line 1275  sub user_load_handler {
           
     return 1;      return 1;
 }  }
 register_handler("userload", \&user_load_handler, 0, 1, 0);  &register_handler("userload", \&user_load_handler, 0, 1, 0);
   
 #   Process a request for the authorization type of a user:  #   Process a request for the authorization type of a user:
 #   (userauth).  #   (userauth).
Line 1224  sub user_authorization_type { Line 1296  sub user_authorization_type {
     my $userinput = "$cmd:$tail";      my $userinput = "$cmd:$tail";
         
     #  Pull the domain and username out of the command tail.      #  Pull the domain and username out of the command tail.
     # and call GetAuthType to determine the authentication type.      # and call get_auth_type to determine the authentication type.
         
     my ($udom,$uname)=split(/:/,$tail);      my ($udom,$uname)=split(/:/,$tail);
     my $result = &GetAuthType($udom, $uname);      my $result = &get_auth_type($udom, $uname);
     if($result eq "nouser") {      if($result eq "nouser") {
  &Failure( $replyfd, "unknown_user\n", $userinput);   &Failure( $replyfd, "unknown_user\n", $userinput);
     } else {      } else {
  #   #
  # We only want to pass the second field from GetAuthType   # We only want to pass the second field from get_auth_type
  # for ^krb.. otherwise we'll be handing out the encrypted   # for ^krb.. otherwise we'll be handing out the encrypted
  # password for internals e.g.   # password for internals e.g.
  #   #
Line 1240  sub user_authorization_type { Line 1312  sub user_authorization_type {
  if($type =~ /^krb/) {   if($type =~ /^krb/) {
     $type = $result;      $type = $result;
  }   }
  &Reply( $replyfd, "$type\n", $userinput);   &Reply( $replyfd, "$type:\n", $userinput);
     }      }
       
     return 1;      return 1;
Line 1260  sub user_authorization_type { Line 1332  sub user_authorization_type {
 #      0       - Program should exit  #      0       - Program should exit
 # Implicit Output:  # Implicit Output:
 #    a reply is written to the client.  #    a reply is written to the client.
   
 sub push_file_handler {  sub push_file_handler {
     my ($cmd, $tail, $client) = @_;      my ($cmd, $tail, $client) = @_;
   
Line 1286  sub push_file_handler { Line 1357  sub push_file_handler {
 }  }
 &register_handler("pushfile", \&push_file_handler, 1, 0, 1);  &register_handler("pushfile", \&push_file_handler, 1, 0, 1);
   
   #
   #   du  - list the disk usuage of a directory recursively. 
   #    
   #   note: stolen code from the ls file handler
   #   under construction by Rick Banghart 
   #    .
   # Parameters:
   #    $cmd        - The command that dispatched us (du).
   #    $ududir     - The directory path to list... I'm not sure what this
   #                  is relative as things like ls:. return e.g.
   #                  no_such_dir.
   #    $client     - Socket open on the client.
   # Returns:
   #     1 - indicating that the daemon should not disconnect.
   # Side Effects:
   #   The reply is written to  $client.
   #
   sub du_handler {
       my ($cmd, $ududir, $client) = @_;
       my ($ududir) = split(/:/,$ududir); # Make 'telnet' testing easier.
       my $userinput = "$cmd:$ududir";
   
       if ($ududir=~/\.\./ || $ududir!~m|^/home/httpd/|) {
    &Failure($client,"refused\n","$cmd:$ududir");
    return 1;
       }
       #  Since $ududir could have some nasties in it,
       #  we will require that ududir is a valid
       #  directory.  Just in case someone tries to
       #  slip us a  line like .;(cd /home/httpd rm -rf*)
       #  etc.
       #
       if (-d $ududir) {
    #  And as Shakespeare would say to make
    #  assurance double sure, 
    # use execute_command to ensure that the command is not executed in
    # a shell that can screw us up.
   
    my $duout = execute_command("du -ks $ududir");
    $duout=~s/[^\d]//g; #preserve only the numbers
    &Reply($client,"$duout\n","$cmd:$ududir");
       } else {
   
    &Failure($client, "bad_directory:$ududir\n","$cmd:$ududir"); 
   
       }
       return 1;
   }
   &register_handler("du", \&du_handler, 0, 1, 0);
   
   #
   #   ls  - list the contents of a directory.  For each file in the
   #    selected directory the filename followed by the full output of
   #    the stat function is returned.  The returned info for each
   #    file are separated by ':'.  The stat fields are separated by &'s.
   # Parameters:
   #    $cmd        - The command that dispatched us (ls).
   #    $ulsdir     - The directory path to list... I'm not sure what this
   #                  is relative as things like ls:. return e.g.
   #                  no_such_dir.
   #    $client     - Socket open on the client.
   # Returns:
   #     1 - indicating that the daemon should not disconnect.
   # Side Effects:
   #   The reply is written to  $client.
   #
   sub ls_handler {
       my ($cmd, $ulsdir, $client) = @_;
   
       my $userinput = "$cmd:$ulsdir";
   
       my $obs;
       my $rights;
       my $ulsout='';
       my $ulsfn;
       if (-e $ulsdir) {
    if(-d $ulsdir) {
       if (opendir(LSDIR,$ulsdir)) {
    while ($ulsfn=readdir(LSDIR)) {
       undef $obs, $rights; 
       my @ulsstats=stat($ulsdir.'/'.$ulsfn);
       #We do some obsolete checking here
       if(-e $ulsdir.'/'.$ulsfn.".meta") { 
    open(FILE, $ulsdir.'/'.$ulsfn.".meta");
    my @obsolete=<FILE>;
    foreach my $obsolete (@obsolete) {
       if($obsolete =~ m|(<obsolete>)(on)|) { $obs = 1; } 
       if($obsolete =~ m|(<copyright>)(default)|) { $rights = 1; }
    }
       }
       $ulsout.=$ulsfn.'&'.join('&',@ulsstats);
       if($obs eq '1') { $ulsout.="&1"; }
       else { $ulsout.="&0"; }
       if($rights eq '1') { $ulsout.="&1:"; }
       else { $ulsout.="&0:"; }
    }
    closedir(LSDIR);
       }
    } else {
       my @ulsstats=stat($ulsdir);
       $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':';
    }
       } else {
    $ulsout='no_such_dir';
       }
       if ($ulsout eq '') { $ulsout='empty'; }
       &Reply($client, "$ulsout\n", $userinput); # This supports debug logging.
       
       return 1;
   
   }
   &register_handler("ls", \&ls_handler, 0, 1, 0);
   
 #   Process a reinit request.  Reinit requests that either  #   Process a reinit request.  Reinit requests that either
 #   lonc or lond be reinitialized so that an updated   #   lonc or lond be reinitialized so that an updated 
Line 1317  sub reinit_process_handler { Line 1499  sub reinit_process_handler {
     }      }
     return 1;      return 1;
 }  }
   
 &register_handler("reinit", \&reinit_process_handler, 1, 0, 1);  &register_handler("reinit", \&reinit_process_handler, 1, 0, 1);
   
 #  Process the editing script for a table edit operation.  #  Process the editing script for a table edit operation.
Line 1359  sub edit_table_handler { Line 1540  sub edit_table_handler {
     }      }
     return 1;      return 1;
 }  }
 register_handler("edit", \&edit_table_handler, 1, 0, 1);  &register_handler("edit", \&edit_table_handler, 1, 0, 1);
   
   
 #  #
 #   Authenticate a user against the LonCAPA authentication  #   Authenticate a user against the LonCAPA authentication
Line 1415  sub authenticate_handler { Line 1595  sub authenticate_handler {
   
     return 1;      return 1;
 }  }
   &register_handler("auth", \&authenticate_handler, 1, 1, 0);
   
 register_handler("auth", \&authenticate_handler, 1, 1, 0);  
   
 #---------------------------------------------------------------  
 #  
 #   Getting, decoding and dispatching requests:  
 #  #
   #   Change a user's password.  Note that this function is complicated by
   #   the fact that a user may be authenticated in more than one way:
   #   At present, we are not able to change the password for all types of
   #   authentication methods.  Only for:
   #      unix    - unix password or shadow passoword style authentication.
   #      local   - Locally written authentication mechanism.
   #   For now, kerb4 and kerb5 password changes are not supported and result
   #   in an error.
   # FUTURE WORK:
   #    Support kerberos passwd changes?
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   # Implicit inputs:
   #    The authentication systems describe above have their own forms of implicit
   #    input into the authentication process that are described above.
   sub change_password_handler {
       my ($cmd, $tail, $client) = @_;
   
 #      my $userinput = $cmd.":".$tail;           # Reconstruct client's string.
 #   Get a Request:  
 #   Gets a Request message from the client.  The transaction  
 #   is defined as a 'line' of text.  We remove the new line  
 #   from the text line.    
 #     
 sub get_request {  
     my $input = <$client>;  
     chomp($input);  
   
     Debug("get_request: Request = $input\n");      #
       #  udom  - user's domain.
       #  uname - Username.
       #  upass - Current password.
       #  npass - New password.
      
       my ($udom,$uname,$upass,$npass)=split(/:/,$tail);
   
     &status('Processing '.$clientname.':'.$input);      $upass=&unescape($upass);
       $npass=&unescape($npass);
       &Debug("Trying to change password for $uname");
   
     return $input;      # First require that the user can be authenticated with their
 }      # old password:
 #---------------------------------------------------------------  
 #  
 #  Process a request.  This sub should shrink as each action  
 #  gets farmed out into a separat sub that is registered   
 #  with the dispatch hash.    
 #  
 # Parameters:  
 #    user_input   - The request received from the client (lonc).  
 # Returns:  
 #    true to keep processing, false if caller should exit.  
 #  
 sub process_request {  
     my ($userinput) = @_;      # Easier for now to break style than to  
                                 # fix all the userinput -> user_input.  
     my $wasenc    = 0; # True if request was encrypted.  
 # ------------------------------------------------------------ See if encrypted  
     if ($userinput =~ /^enc/) {  
  $userinput = decipher($userinput);  
  $wasenc=1;  
  if(!$userinput) { # Cipher not defined.  
     &Failure($client, "error: Encrypted data without negotated key");  
     return 0;  
  }  
     }  
     Debug("process_request: $userinput\n");  
       
     #    
     #   The 'correct way' to add a command to lond is now to  
     #   write a sub to execute it and Add it to the command dispatch  
     #   hash via a call to register_handler..  The comments to that  
     #   sub should give you enough to go on to show how to do this  
     #   along with the examples that are building up as this code  
     #   is getting refactored.   Until all branches of the  
     #   if/elseif monster below have been factored out into  
     #   separate procesor subs, if the dispatch hash is missing  
     #   the command keyword, we will fall through to the remainder  
     #   of the if/else chain below in order to keep this thing in   
     #   working order throughout the transmogrification.  
   
     my ($command, $tail) = split(/:/, $userinput, 2);      my $validated = &validate_user($udom, $uname, $upass);
     chomp($command);      if($validated) {
     chomp($tail);   my $realpasswd  = &get_auth_type($udom, $uname); # Defined since authd.
     $tail =~ s/(\r)//; # This helps people debugging with e.g. telnet.  
     $command =~ s/(\r)//; # And this too for parameterless commands.   my ($howpwd,$contentpwd)=split(/:/,$realpasswd);
     if(!$tail) {   if ($howpwd eq 'internal') {
  $tail =""; # defined but blank.      &Debug("internal auth");
       my $salt=time;
       $salt=substr($salt,6,2);
       my $ncpass=crypt($npass,$salt);
       if(&rewrite_password_file($udom, $uname, "internal:$ncpass")) {
    &logthis("Result of password change for "
    ."$uname: pwchange_success");
    &Reply($client, "ok\n", $userinput);
       } else {
    &logthis("Unable to open $uname passwd "               
    ."to change password");
    &Failure( $client, "non_authorized\n",$userinput);
       }
    } elsif ($howpwd eq 'unix') {
       # Unix means we have to access /etc/password
       &Debug("auth is unix");
       my $execdir=$perlvar{'lonDaemons'};
       &Debug("Opening lcpasswd pipeline");
       my $pf = IO::File->new("|$execdir/lcpasswd > "
      ."$perlvar{'lonDaemons'}"
      ."/logs/lcpasswd.log");
       print $pf "$uname\n$npass\n$npass\n";
       close $pf;
       my $err = $?;
       my $result = ($err>0 ? 'pwchange_failure' : 'ok');
       &logthis("Result of password change for $uname: ".
        &lcpasswdstrerror($?));
       &Reply($client, "$result\n", $userinput);
    } else {
       # this just means that the current password mode is not
       # one we know how to change (e.g the kerberos auth modes or
       # locally written auth handler).
       #
       &Failure( $client, "auth_mode_error\n", $userinput);
    }  
   
       } else {
    &Failure( $client, "non_authorized\n", $userinput);
     }      }
   
     &Debug("Command received: $command, encoded = $wasenc");      return 1;
   }
   &register_handler("passwd", \&change_password_handler, 1, 1, 0);
   
     if(defined $Dispatcher{$command}) {  #
   #   Create a new user.  User in this case means a lon-capa user.
   #   The user must either already exist in some authentication realm
   #   like kerberos or the /etc/passwd.  If not, a user completely local to
   #   this loncapa system is created.
   #
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   # Implicit inputs:
   #    The authentication systems describe above have their own forms of implicit
   #    input into the authentication process that are described above.
   sub add_user_handler {
   
  my $dispatch_info = $Dispatcher{$command};      my ($cmd, $tail, $client) = @_;
  my $handler       = $$dispatch_info[0];  
  my $need_encode   = $$dispatch_info[1];  
  my $client_types  = $$dispatch_info[2];  
  Debug("Matched dispatch hash: mustencode: $need_encode "  
       ."ClientType $client_types");  
         
  #  Validate the request:  
         
  my $ok = 1;  
  my $requesterprivs = 0;  
  if(&isClient()) {  
     $requesterprivs |= $CLIENT_OK;  
  }  
  if(&isManager()) {  
     $requesterprivs |= $MANAGER_OK;  
  }  
  if($need_encode && (!$wasenc)) {  
     Debug("Must encode but wasn't: $need_encode $wasenc");  
     $ok = 0;  
  }  
  if(($client_types & $requesterprivs) == 0) {  
     Debug("Client not privileged to do this operation");  
     $ok = 0;  
  }  
   
  if($ok) {  
     Debug("Dispatching to handler $command $tail");  
     my $keep_going = &$handler($command, $tail, $client);  
     return $keep_going;  
  } else {  
     Debug("Refusing to dispatch because client did not match requirements");  
     Failure($client, "refused\n", $userinput);  
     return 1;  
  }  
   
     }          my ($udom,$uname,$umode,$npass)=split(/:/,$tail);
       my $userinput = $cmd.":".$tail; # Reconstruct the full request line.
   
 #------------------- Commands not yet in spearate handlers. --------------      &Debug("cmd =".$cmd." $udom =".$udom." uname=".$uname);
   
   
 # ---------------------------------------------------------------------- passwd      if($udom eq $currentdomainid) { # Reject new users for other domains...
     if ($userinput =~ /^passwd/) { # encoded and client  
  if (($wasenc==1) && isClient) {  
     my   
  ($cmd,$udom,$uname,$upass,$npass)=split(/:/,$userinput);  
     chomp($npass);  
     $upass=&unescape($upass);  
     $npass=&unescape($npass);  
     &Debug("Trying to change password for $uname");  
     my $proname=propath($udom,$uname);  
     my $passfilename="$proname/passwd";  
     if (-e $passfilename) {  
  my $realpasswd;  
  { my $pf = IO::File->new($passfilename);  
   $realpasswd=<$pf>; }  
  chomp($realpasswd);  
  my ($howpwd,$contentpwd)=split(/:/,$realpasswd);  
  if ($howpwd eq 'internal') {  
     &Debug("internal auth");  
     if (crypt($upass,$contentpwd) eq $contentpwd) {  
  my $salt=time;  
  $salt=substr($salt,6,2);  
  my $ncpass=crypt($npass,$salt);  
  {  
     my $pf;  
     if ($pf = IO::File->new(">$passfilename")) {  
  print $pf "internal:$ncpass\n";  
  &logthis("Result of password change for $uname: pwchange_success");  
  print $client "ok\n";  
     } else {  
  &logthis("Unable to open $uname passwd to change password");  
  print $client "non_authorized\n";  
     }  
  }               
   
     } else {  
  print $client "non_authorized\n";  
     }  
  } elsif ($howpwd eq 'unix') {  
     # Unix means we have to access /etc/password  
     # one way or another.  
     # First: Make sure the current password is  
     #        correct  
     &Debug("auth is unix");  
     $contentpwd=(getpwnam($uname))[1];  
     my $pwdcorrect = "0";  
     my $pwauth_path="/usr/local/sbin/pwauth";  
     unless ($contentpwd eq 'x') {  
  $pwdcorrect=  
     (crypt($upass,$contentpwd) eq $contentpwd);  
     } elsif (-e $pwauth_path) {  
  open PWAUTH, "|$pwauth_path" or  
     die "Cannot invoke authentication";  
  print PWAUTH "$uname\n$upass\n";  
  close PWAUTH;  
  &Debug("exited pwauth with $? ($uname,$upass) ");  
  $pwdcorrect=($? == 0);  
     }  
     if ($pwdcorrect) {  
  my $execdir=$perlvar{'lonDaemons'};  
  &Debug("Opening lcpasswd pipeline");  
  my $pf = IO::File->new("|$execdir/lcpasswd > $perlvar{'lonDaemons'}/logs/lcpasswd.log");  
  print $pf "$uname\n$npass\n$npass\n";  
  close $pf;  
  my $err = $?;  
  my $result = ($err>0 ? 'pwchange_failure'   
       : 'ok');  
  &logthis("Result of password change for $uname: ".  
  &lcpasswdstrerror($?));  
  print $client "$result\n";  
     } else {  
  print $client "non_authorized\n";  
     }  
  } else {  
     print $client "auth_mode_error\n";  
  }    
     } else {  
  print $client "unknown_user\n";  
     }  
  } else {  
     Reply($client, "refused\n", $userinput);  
       
  }  
 # -------------------------------------------------------------------- makeuser  
     } elsif ($userinput =~ /^makeuser/) { # encoded and client.  
  &Debug("Make user received");  
  my $oldumask=umask(0077);   my $oldumask=umask(0077);
  if (($wasenc==1) && isClient) {   chomp($npass);
     my    $npass=&unescape($npass);
  ($cmd,$udom,$uname,$umode,$npass)=split(/:/,$userinput);   my $passfilename  = &password_path($udom, $uname);
     &Debug("cmd =".$cmd." $udom =".$udom.   &Debug("Password file created will be:".$passfilename);
    " uname=".$uname);   if (-e $passfilename) {
     chomp($npass);      &Failure( $client, "already_exists\n", $userinput);
     $npass=&unescape($npass);   } else {
     my $proname=propath($udom,$uname);      my @fpparts=split(/\//,$passfilename);
     my $passfilename="$proname/passwd";      my $fpnow=$fpparts[0].'/'.$fpparts[1].'/'.$fpparts[2];
     &Debug("Password file created will be:".      my $fperror='';
    $passfilename);      for (my $i=3;$i<= ($#fpparts-1);$i++) {
     if (-e $passfilename) {   $fpnow.='/'.$fpparts[$i]; 
  print $client "already_exists\n";   unless (-e $fpnow) {
     } elsif ($udom ne $currentdomainid) {      &logthis("mkdir $fpnow");
  print $client "not_right_domain\n";      unless (mkdir($fpnow,0777)) {
     } else {   $fperror="error: ".($!+0)." mkdir failed while attempting "
  my @fpparts=split(/\//,$proname);      ."makeuser";
  my $fpnow=$fpparts[0].'/'.$fpparts[1].'/'.$fpparts[2];  
  my $fperror='';  
  for (my $i=3;$i<=$#fpparts;$i++) {  
     $fpnow.='/'.$fpparts[$i];   
     unless (-e $fpnow) {  
  unless (mkdir($fpnow,0777)) {  
     $fperror="error: ".($!+0)  
  ." mkdir failed while attempting "  
  ."makeuser";  
  }  
     }      }
  }   }
  unless ($fperror) {  
     my $result=&make_passwd_file($uname, $umode,$npass,  
  $passfilename);  
     print $client $result;  
  } else {  
     print $client "$fperror\n";  
  }  
     }  
  } else {  
     Reply($client, "refused\n", $userinput);  
       
  }  
  umask($oldumask);  
 # -------------------------------------------------------------- changeuserauth  
     } elsif ($userinput =~ /^changeuserauth/) { # encoded & client  
  &Debug("Changing authorization");  
  if (($wasenc==1) && isClient) {  
     my   
  ($cmd,$udom,$uname,$umode,$npass)=split(/:/,$userinput);  
     chomp($npass);  
     &Debug("cmd = ".$cmd." domain= ".$udom.  
    "uname =".$uname." umode= ".$umode);  
     $npass=&unescape($npass);  
     my $proname=&propath($udom,$uname);  
     my $passfilename="$proname/passwd";  
     if ($udom ne $currentdomainid) {  
  print $client "not_right_domain\n";  
     } else {  
  my $result=&make_passwd_file($uname, $umode,$npass,  
      $passfilename);  
  print $client $result;  
     }      }
  } else {      unless ($fperror) {
     Reply($client, "refused\n", $userinput);   my $result=&make_passwd_file($uname, $umode,$npass, $passfilename);
        &Reply($client, $result, $userinput);     #BUGBUG - could be fail
  }  
 # ------------------------------------------------------------------------ home  
     } elsif ($userinput =~ /^home/) { # client clear or encoded  
  if(isClient) {  
     my ($cmd,$udom,$uname)=split(/:/,$userinput);  
     chomp($uname);  
     my $proname=propath($udom,$uname);  
     if (-e $proname) {  
  print $client "found\n";  
     } else {      } else {
  print $client "not_found\n";   &Failure($client, "$fperror\n", $userinput);
     }      }
  } else {  
     Reply($client, "refused\n", $userinput);  
       
  }   }
 # ---------------------------------------------------------------------- update   umask($oldumask);
     } elsif ($userinput =~ /^update/) { # client clear or encoded.      }  else {
  if(isClient) {   &Failure($client, "not_right_domain\n",
     my ($cmd,$fname)=split(/:/,$userinput);   $userinput); # Even if we are multihomed.
     my $ownership=ishome($fname);      
     if ($ownership eq 'not_owner') {      }
  if (-e $fname) {      return 1;
     my ($dev,$ino,$mode,$nlink,  
  $uid,$gid,$rdev,$size,  }
  $atime,$mtime,$ctime,  &register_handler("makeuser", \&add_user_handler, 1, 1, 0);
  $blksize,$blocks)=stat($fname);  
     my $now=time;  #
     my $since=$now-$atime;  #   Change the authentication method of a user.  Note that this may
     if ($since>$perlvar{'lonExpire'}) {  #   also implicitly change the user's password if, for example, the user is
  my $reply=  #   joining an existing authentication realm.  Known authentication realms at
     &reply("unsub:$fname","$clientname");  #   this time are:
     unlink("$fname");  #    internal   - Purely internal password file (only loncapa knows this user)
     } else {  #    local      - Institutionally written authentication module.
  my $transname="$fname.in.transfer";  #    unix       - Unix user (/etc/passwd with or without /etc/shadow).
  my $remoteurl=  #    kerb4      - kerberos version 4
     &reply("sub:$fname","$clientname");  #    kerb5      - kerberos version 5
  my $response;  #
  {  # Parameters:
     my $ua=new LWP::UserAgent;  #    $cmd      - The command that got us here.
     my $request=new HTTP::Request('GET',"$remoteurl");  #    $tail     - Tail of the command (remaining parameters).
     $response=$ua->request($request,$transname);  #    $client   - File descriptor connected to client.
  }  # Returns
  if ($response->is_error()) {  #     0        - Requested to exit, caller should shut down.
     unlink($transname);  #     1        - Continue processing.
     my $message=$response->status_line;  # Implicit inputs:
     &logthis(  #    The authentication systems describe above have their own forms of implicit
      "LWP GET: $message for $fname ($remoteurl)");  #    input into the authentication process that are described above.
  } else {  #
     if ($remoteurl!~/\.meta$/) {  sub change_authentication_handler {
  my $ua=new LWP::UserAgent;  
  my $mrequest=      my ($cmd, $tail, $client) = @_;
     new HTTP::Request('GET',$remoteurl.'.meta');     
  my $mresponse=      my $userinput  = "$cmd:$tail";              # Reconstruct user input.
     $ua->request($mrequest,$fname.'.meta');  
  if ($mresponse->is_error()) {      my ($udom,$uname,$umode,$npass)=split(/:/,$tail);
     unlink($fname.'.meta');      &Debug("cmd = ".$cmd." domain= ".$udom."uname =".$uname." umode= ".$umode);
  }      if ($udom ne $currentdomainid) {
     }   &Failure( $client, "not_right_domain\n", $client);
     rename($transname,$fname);      } else {
  }  
     }   chomp($npass);
     print $client "ok\n";  
  } else {   $npass=&unescape($npass);
     print $client "not_found\n";   my $oldauth = &get_auth_type($udom, $uname); # Get old auth info.
    my $passfilename = &password_path($udom, $uname);
    if ($passfilename) { # Not allowed to create a new user!!
       my $result=&make_passwd_file($uname, $umode,$npass,$passfilename);
       #
       #  If the current auth mode is internal, and the old auth mode was
       #  unix, or krb*,  and the user is an author for this domain,
       #  re-run manage_permissions for that role in order to be able
       #  to take ownership of the construction space back to www:www
       #
   
       if( ($oldauth =~ /^unix/) && ($umode eq "internal")) { # unix -> internal
    if(&is_author($udom, $uname)) {
       &Debug(" Need to manage author permissions...");
       &manage_permissions("/$udom/_au", $udom, $uname, "internal:");
  }   }
     } else {  
  print $client "rejected\n";  
     }      }
  } else {         
     Reply($client, "refused\n", $userinput);  
           &Reply($client, $result, $userinput);
    } else {       
       &Failure($client, "non_authorized\n", $userinput); # Fail the user now.
  }   }
 # -------------------------------------- fetch a user file from a remote server      }
     } elsif ($userinput =~ /^fetchuserfile/) { # Client clear or enc.      return 1;
  if(isClient) {  }
     my ($cmd,$fname)=split(/:/,$userinput);  &register_handler("changeuserauth", \&change_authentication_handler, 1,1, 0);
     my ($udom,$uname,$ufile) = ($fname =~ m|^([^/]+)/([^/]+)/(.+)$|);  
     my $udir=propath($udom,$uname).'/userfiles';  #
     unless (-e $udir) { mkdir($udir,0770); }  #   Determines if this is the home server for a user.  The home server
     if (-e $udir) {  #   for a user will have his/her lon-capa passwd file.  Therefore all we need
  $ufile=~s/^[\.\~]+//;  #   to do is determine if this file exists.
  my $path = $udir;  #
  if ($ufile =~m|(.+)/([^/]+)$|) {  # Parameters:
     my @parts=split('/',$1);  #    $cmd      - The command that got us here.
     foreach my $part (@parts) {  #    $tail     - Tail of the command (remaining parameters).
  $path .= '/'.$part;  #    $client   - File descriptor connected to client.
  if ((-e $path)!=1) {  # Returns
     mkdir($path,0770);  #     0        - Requested to exit, caller should shut down.
  }  #     1        - Continue processing.
     }  # Implicit inputs:
  }  #    The authentication systems describe above have their own forms of implicit
  my $destname=$udir.'/'.$ufile;  #    input into the authentication process that are described above.
  my $transname=$udir.'/'.$ufile.'.in.transit';  #
  my $remoteurl='http://'.$clientip.'/userfiles/'.$fname;  sub is_home_handler {
       my ($cmd, $tail, $client) = @_;
      
       my $userinput  = "$cmd:$tail";
      
       my ($udom,$uname)=split(/:/,$tail);
       chomp($uname);
       my $passfile = &password_filename($udom, $uname);
       if($passfile) {
    &Reply( $client, "found\n", $userinput);
       } else {
    &Failure($client, "not_found\n", $userinput);
       }
       return 1;
   }
   &register_handler("home", \&is_home_handler, 0,1,0);
   
   #
   #   Process an update request for a resource?? I think what's going on here is
   #   that a resource has been modified that we hold a subscription to.
   #   If the resource is not local, then we must update, or at least invalidate our
   #   cached copy of the resource. 
   #   FUTURE WORK:
   #      I need to look at this logic carefully.  My druthers would be to follow
   #      typical caching logic, and simple invalidate the cache, drop any subscription
   #      an let the next fetch start the ball rolling again... however that may
   #      actually be more difficult than it looks given the complex web of
   #      proxy servers.
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   # Implicit inputs:
   #    The authentication systems describe above have their own forms of implicit
   #    input into the authentication process that are described above.
   #
   sub update_resource_handler {
   
       my ($cmd, $tail, $client) = @_;
      
       my $userinput = "$cmd:$tail";
      
       my $fname= $tail; # This allows interactive testing
   
   
       my $ownership=ishome($fname);
       if ($ownership eq 'not_owner') {
    if (-e $fname) {
       my ($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$size,
    $atime,$mtime,$ctime,$blksize,$blocks)=stat($fname);
       my $now=time;
       my $since=$now-$atime;
       if ($since>$perlvar{'lonExpire'}) {
    my $reply=&reply("unsub:$fname","$clientname");
    unlink("$fname");
       } else {
    my $transname="$fname.in.transfer";
    my $remoteurl=&reply("sub:$fname","$clientname");
  my $response;   my $response;
    alarm(120);
  {   {
     my $ua=new LWP::UserAgent;      my $ua=new LWP::UserAgent;
     my $request=new HTTP::Request('GET',"$remoteurl");      my $request=new HTTP::Request('GET',"$remoteurl");
     $response=$ua->request($request,$transname);      $response=$ua->request($request,$transname);
  }   }
    alarm(0);
  if ($response->is_error()) {   if ($response->is_error()) {
     unlink($transname);      unlink($transname);
     my $message=$response->status_line;      my $message=$response->status_line;
     &logthis("LWP GET: $message for $fname ($remoteurl)");      &logthis("LWP GET: $message for $fname ($remoteurl)");
     print $client "failed\n";  
  } else {   } else {
     if (!rename($transname,$destname)) {      if ($remoteurl!~/\.meta$/) {
  &logthis("Unable to move $transname to $destname");   alarm(120);
  unlink($transname);   {
  print $client "failed\n";      my $ua=new LWP::UserAgent;
     } else {      my $mrequest=new HTTP::Request('GET',$remoteurl.'.meta');
  print $client "ok\n";      my $mresponse=$ua->request($mrequest,$fname.'.meta');
     }      if ($mresponse->is_error()) {
  }   unlink($fname.'.meta');
     } else {      }
  print $client "not_home\n";  
     }  
  } else {  
     Reply($client, "refused\n", $userinput);  
  }  
 # --------------------------------------------------------- remove a user file   
     } elsif ($userinput =~ /^removeuserfile/) { # Client clear or enc.  
  if(isClient) {  
     my ($cmd,$fname)=split(/:/,$userinput);  
     my ($udom,$uname,$ufile) = ($fname =~ m|^([^/]+)/([^/]+)/(.+)$|);  
     &logthis("$udom - $uname - $ufile");  
     if ($ufile =~m|/\.\./|) {  
  # any files paths with /../ in them refuse   
  # to deal with  
  print $client "refused\n";  
     } else {  
  my $udir=propath($udom,$uname);  
  if (-e $udir) {  
     my $file=$udir.'/userfiles/'.$ufile;  
     if (-e $file) {  
  unlink($file);  
  if (-e $file) {  
     print $client "failed\n";  
  } else {  
     print $client "ok\n";  
  }   }
     } else {   alarm(0);
  print $client "not_found\n";  
     }      }
  } else {      rename($transname,$fname);
     print $client "not_home\n";  
  }   }
     }      }
       &Reply( $client, "ok\n", $userinput);
  } else {   } else {
     Reply($client, "refused\n", $userinput);      &Failure($client, "not_found\n", $userinput);
  }   }
 # ------------------------------------------ authenticate access to a user file      } else {
     } elsif ($userinput =~ /^tokenauthuserfile/) { # Client only   &Failure($client, "rejected\n", $userinput);
  if(isClient) {      }
     my ($cmd,$fname,$session)=split(/:/,$userinput);      return 1;
     chomp($session);  }
     my $reply='non_auth';  &register_handler("update", \&update_resource_handler, 0 ,1, 0);
     if (open(ENVIN,$perlvar{'lonIDsDir'}.'/'.  
      $session.'.id')) {  #
  while (my $line=<ENVIN>) {  #   Fetch a user file from a remote server to the user's home directory
     if ($line=~ m|userfile\.\Q$fname\E\=|) { $reply='ok'; }  #   userfiles subdir.
     }  # Parameters:
  close(ENVIN);  #    $cmd      - The command that got us here.
  print $client $reply."\n";  #    $tail     - Tail of the command (remaining parameters).
     } else {  #    $client   - File descriptor connected to client.
  print $client "invalid_token\n";  # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   #
   sub fetch_user_file_handler {
   
       my ($cmd, $tail, $client) = @_;
   
       my $userinput = "$cmd:$tail";
       my $fname           = $tail;
       my ($udom,$uname,$ufile) = ($fname =~ m|^([^/]+)/([^/]+)/(.+)$|);
       my $udir=&propath($udom,$uname).'/userfiles';
       unless (-e $udir) {
    mkdir($udir,0770); 
       }
       Debug("fetch user file for $fname");
       if (-e $udir) {
    $ufile=~s/^[\.\~]+//;
   
    # IF necessary, create the path right down to the file.
    # Note that any regular files in the way of this path are
    # wiped out to deal with some earlier folly of mine.
   
    my $path = $udir;
    if ($ufile =~m|(.+)/([^/]+)$|) {
       my @parts=split('/',$1);
       foreach my $part (@parts) {
    $path .= '/'.$part;
    if( -f $path) {
       unlink($path);
    }
    if ((-e $path)!=1) {
       mkdir($path,0770);
    }
     }      }
  } else {  
     Reply($client, "refused\n", $userinput);  
       
  }   }
 # ----------------------------------------------------------------- unsubscribe  
     } elsif ($userinput =~ /^unsub/) {  
  if(isClient) {   my $destname=$udir.'/'.$ufile;
     my ($cmd,$fname)=split(/:/,$userinput);   my $transname=$udir.'/'.$ufile.'.in.transit';
     if (-e $fname) {   my $remoteurl='http://'.$clientip.'/userfiles/'.$fname;
  print $client &unsub($fname,$clientip);   my $response;
    Debug("Remote URL : $remoteurl Transfername $transname Destname: $destname");
    alarm(120);
    {
       my $ua=new LWP::UserAgent;
       my $request=new HTTP::Request('GET',"$remoteurl");
       $response=$ua->request($request,$transname);
    }
    alarm(0);
    if ($response->is_error()) {
       unlink($transname);
       my $message=$response->status_line;
       &logthis("LWP GET: $message for $fname ($remoteurl)");
       &Failure($client, "failed\n", $userinput);
    } else {
       Debug("Renaming $transname to $destname");
       if (!rename($transname,$destname)) {
    &logthis("Unable to move $transname to $destname");
    unlink($transname);
    &Failure($client, "failed\n", $userinput);
     } else {      } else {
  print $client "not_found\n";   &Reply($client, "ok\n", $userinput);
     }      }
  } else {   }   
     Reply($client, "refused\n", $userinput);      } else {
        &Failure($client, "not_home\n", $userinput);
  }      }
 # ------------------------------------------------------------------- subscribe      return 1;
     } elsif ($userinput =~ /^sub/) {  }
  if(isClient) {  &register_handler("fetchuserfile", \&fetch_user_file_handler, 0, 1, 0);
     print $client &subscribe($userinput,$clientip);  
  } else {  #
     Reply($client, "refused\n", $userinput);  #   Remove a file from a user's home directory userfiles subdirectory.
       # Parameters:
  }  #    cmd   - the Lond request keyword that got us here.
 # ------------------------------------------------------------- current version  #    tail  - the part of the command past the keyword.
     } elsif ($userinput =~ /^currentversion/) {  #    client- File descriptor connected with the client.
  if(isClient) {  #
     my ($cmd,$fname)=split(/:/,$userinput);  # Returns:
     print $client &currentversion($fname)."\n";  #    1    - Continue processing.
  } else {  sub remove_user_file_handler {
     Reply($client, "refused\n", $userinput);      my ($cmd, $tail, $client) = @_;
       
  }      my ($fname) = split(/:/, $tail); # Get rid of any tailing :'s lonc may have sent.
 # ------------------------------------------------------------------------- log  
     } elsif ($userinput =~ /^log/) {      my ($udom,$uname,$ufile) = ($fname =~ m|^([^/]+)/([^/]+)/(.+)$|);
  if(isClient) {      if ($ufile =~m|/\.\./|) {
     my ($cmd,$udom,$uname,$what)=split(/:/,$userinput);   # any files paths with /../ in them refuse 
     chomp($what);   # to deal with
     my $proname=propath($udom,$uname);   &Failure($client, "refused\n", "$cmd:$tail");
     my $now=time;      } else {
     {   my $udir = &propath($udom,$uname);
  my $hfh;   if (-e $udir) {
  if ($hfh=IO::File->new(">>$proname/activity.log")) {       my $file=$udir.'/userfiles/'.$ufile;
     print $hfh "$now:$clientname:$what\n";      if (-e $file) {
     print $client "ok\n";    #
  } else {   #   If the file is a regular file unlink is fine...
     print $client "error: ".($!+0)   #   However it's possible the client wants a dir.
  ." IO::File->new Failed "   #   removed, in which case rmdir is more approprate:
  ."while attempting log\n";   #
           if (-f $file){
       unlink($file);
    } elsif(-d $file) {
       rmdir($file);
  }   }
     }   if (-e $file) {
  } else {      #  File is still there after we deleted it ?!?
     Reply($client, "refused\n", $userinput);  
           &Failure($client, "failed\n", "$cmd:$tail");
  }  
 # ------------------------------------------------------------------------- put  
     } elsif ($userinput =~ /^put/) {  
  if(isClient) {  
     my ($cmd,$udom,$uname,$namespace,$what)  
  =split(/:/,$userinput,5);  
     $namespace=~s/\//\_/g;  
     $namespace=~s/\W//g;  
     if ($namespace ne 'roles') {  
  chomp($what);  
  my $proname=propath($udom,$uname);  
  my $now=time;  
  my @pairs=split(/\&/,$what);  
  my %hash;  
  if (tie(%hash,'GDBM_File',  
  "$proname/$namespace.db",  
  &GDBM_WRCREAT(),0640)) {  
     unless ($namespace=~/^nohist\_/) {  
  my $hfh;  
  if ($hfh=IO::File->new(">>$proname/$namespace.hist")) { print $hfh "P:$now:$what\n"; }  
     }  
       
     foreach my $pair (@pairs) {  
  my ($key,$value)=split(/=/,$pair);  
  $hash{$key}=$value;  
     }  
     if (untie(%hash)) {  
  print $client "ok\n";  
     } else {  
  print $client "error: ".($!+0)  
     ." untie(GDBM) failed ".  
     "while attempting put\n";  
     }  
  } else {   } else {
     print $client "error: ".($!)      &Reply($client, "ok\n", "$cmd:$tail");
  ." tie(GDBM) Failed ".  
  "while attempting put\n";  
  }   }
     } else {      } else {
  print $client "refused\n";   &Failure($client, "not_found\n", "$cmd:$tail");
     }      }
  } else {   } else {
     Reply($client, "refused\n", $userinput);      &Failure($client, "not_home\n", "$cmd:$tail");
       
  }   }
 # ------------------------------------------------------------------- inc      }
     } elsif ($userinput =~ /^inc:/) {      return 1;
  if(isClient) {  }
     my ($cmd,$udom,$uname,$namespace,$what)  &register_handler("removeuserfile", \&remove_user_file_handler, 0,1,0);
  =split(/:/,$userinput);  
     $namespace=~s/\//\_/g;  #
     $namespace=~s/\W//g;  #   make a directory in a user's home directory userfiles subdirectory.
     if ($namespace ne 'roles') {  # Parameters:
  chomp($what);  #    cmd   - the Lond request keyword that got us here.
  my $proname=propath($udom,$uname);  #    tail  - the part of the command past the keyword.
  my $now=time;  #    client- File descriptor connected with the client.
  my @pairs=split(/\&/,$what);  #
  my %hash;  # Returns:
  if (tie(%hash,'GDBM_File',  #    1    - Continue processing.
  "$proname/$namespace.db",  sub mkdir_user_file_handler {
  &GDBM_WRCREAT(),0640)) {      my ($cmd, $tail, $client) = @_;
     unless ($namespace=~/^nohist\_/) {  
  my $hfh;      my ($dir) = split(/:/, $tail); # Get rid of any tailing :'s lonc may have sent.
  if ($hfh=IO::File->new(">>$proname/$namespace.hist")) { print $hfh "P:$now:$what\n"; }      $dir=&unescape($dir);
     }      my ($udom,$uname,$ufile) = ($dir =~ m|^([^/]+)/([^/]+)/(.+)$|);
     foreach my $pair (@pairs) {      if ($ufile =~m|/\.\./|) {
  my ($key,$value)=split(/=/,$pair);   # any files paths with /../ in them refuse 
  # We could check that we have a number...   # to deal with
  if (! defined($value) || $value eq '') {   &Failure($client, "refused\n", "$cmd:$tail");
     $value = 1;      } else {
  }   my $udir = &propath($udom,$uname);
  $hash{$key}+=$value;   if (-e $udir) {
     }      my $newdir=$udir.'/userfiles/'.$ufile;
     if (untie(%hash)) {      if (!-e $newdir) {
  print $client "ok\n";   my @parts=split('/',$newdir);
     } else {   my $path;
  print $client "error: ".($!+0)   foreach my $part (@parts) {
     ." untie(GDBM) failed ".      $path .= '/'.$part;
     "while attempting inc\n";      if (!-e $path) {
    mkdir($path,0770);
     }      }
  } else {  
     print $client "error: ".($!)  
  ." tie(GDBM) Failed ".  
  "while attempting inc\n";  
  }   }
     } else {   if (!-e $newdir) {
  print $client "refused\n";      &Failure($client, "failed\n", "$cmd:$tail");
     }  
  } else {  
     Reply($client, "refused\n", $userinput);  
       
  }  
 # -------------------------------------------------------------------- rolesput  
     } elsif ($userinput =~ /^rolesput/) {  
  if(isClient) {  
     &Debug("rolesput");  
     if ($wasenc==1) {  
  my ($cmd,$exedom,$exeuser,$udom,$uname,$what)  
     =split(/:/,$userinput);  
  &Debug("cmd = ".$cmd." exedom= ".$exedom.  
        "user = ".$exeuser." udom=".$udom.  
        "what = ".$what);  
  my $namespace='roles';  
  chomp($what);  
  my $proname=propath($udom,$uname);  
  my $now=time;  
  my @pairs=split(/\&/,$what);  
  my %hash;  
  if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) {  
     {  
  my $hfh;  
  if ($hfh=IO::File->new(">>$proname/$namespace.hist")) {   
     print $hfh "P:$now:$exedom:$exeuser:$what\n";  
  }  
     }  
       
     foreach my $pair (@pairs) {  
  my ($key,$value)=split(/=/,$pair);  
  &ManagePermissions($key, $udom, $uname,  
    &GetAuthType( $udom,   
  $uname));  
  $hash{$key}=$value;  
     }  
     if (untie(%hash)) {  
  print $client "ok\n";  
     } else {  
  print $client "error: ".($!+0)  
     ." untie(GDBM) Failed ".  
     "while attempting rolesput\n";  
     }  
  } else {  
     print $client "error: ".($!+0)  
  ." tie(GDBM) Failed ".  
  "while attempting rolesput\n";  
     }  
     } else {  
  print $client "refused\n";  
     }  
  } else {  
     Reply($client, "refused\n", $userinput);  
       
  }  
 # -------------------------------------------------------------------- rolesdel  
     } elsif ($userinput =~ /^rolesdel/) {  
  if(isClient) {  
     &Debug("rolesdel");  
     if ($wasenc==1) {  
  my ($cmd,$exedom,$exeuser,$udom,$uname,$what)  
     =split(/:/,$userinput);  
  &Debug("cmd = ".$cmd." exedom= ".$exedom.  
        "user = ".$exeuser." udom=".$udom.  
        "what = ".$what);  
  my $namespace='roles';  
  chomp($what);  
  my $proname=propath($udom,$uname);  
  my $now=time;  
  my @rolekeys=split(/\&/,$what);  
  my %hash;  
  if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) {  
     {  
  my $hfh;  
  if ($hfh=IO::File->new(">>$proname/$namespace.hist")) {   
     print $hfh "D:$now:$exedom:$exeuser:$what\n";  
  }  
     }  
     foreach my $key (@rolekeys) {  
  delete $hash{$key};  
     }  
     if (untie(%hash)) {  
  print $client "ok\n";  
     } else {  
  print $client "error: ".($!+0)  
     ." untie(GDBM) Failed ".  
     "while attempting rolesdel\n";  
     }  
  } else {   } else {
     print $client "error: ".($!+0)      &Reply($client, "ok\n", "$cmd:$tail");
  ." tie(GDBM) Failed ".  
  "while attempting rolesdel\n";  
  }   }
     } else {      } else {
  print $client "refused\n";   &Failure($client, "not_found\n", "$cmd:$tail");
     }      }
  } else {   } else {
     Reply($client, "refused\n", $userinput);      &Failure($client, "not_home\n", "$cmd:$tail");
       
  }   }
 # ------------------------------------------------------------------------- get      }
     } elsif ($userinput =~ /^get/) {      return 1;
  if(isClient) {  }
     my ($cmd,$udom,$uname,$namespace,$what)  &register_handler("mkdiruserfile", \&mkdir_user_file_handler, 0,1,0);
  =split(/:/,$userinput);  
     $namespace=~s/\//\_/g;  #
     $namespace=~s/\W//g;  #   rename a file in a user's home directory userfiles subdirectory.
     chomp($what);  # Parameters:
     my @queries=split(/\&/,$what);  #    cmd   - the Lond request keyword that got us here.
     my $proname=propath($udom,$uname);  #    tail  - the part of the command past the keyword.
     my $qresult='';  #    client- File descriptor connected with the client.
     my %hash;  #
     if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) {  # Returns:
  for (my $i=0;$i<=$#queries;$i++) {  #    1    - Continue processing.
     $qresult.="$hash{$queries[$i]}&";  sub rename_user_file_handler {
  }      my ($cmd, $tail, $client) = @_;
  if (untie(%hash)) {  
     $qresult=~s/\&$//;      my ($udom,$uname,$old,$new) = split(/:/, $tail);
     print $client "$qresult\n";      $old=&unescape($old);
  } else {      $new=&unescape($new);
     print $client "error: ".($!+0)      if ($new =~m|/\.\./| || $old =~m|/\.\./|) {
  ." untie(GDBM) Failed ".   # any files paths with /../ in them refuse to deal with
  "while attempting get\n";   &Failure($client, "refused\n", "$cmd:$tail");
  }      } else {
    my $udir = &propath($udom,$uname);
    if (-e $udir) {
       my $oldfile=$udir.'/userfiles/'.$old;
       my $newfile=$udir.'/userfiles/'.$new;
       if (-e $newfile) {
    &Failure($client, "exists\n", "$cmd:$tail");
       } elsif (! -e $oldfile) {
    &Failure($client, "not_found\n", "$cmd:$tail");
     } else {      } else {
  if ($!+0 == 2) {   if (!rename($oldfile,$newfile)) {
     print $client "error:No such file or ".      &Failure($client, "failed\n", "$cmd:$tail");
  "GDBM reported bad block error\n";  
  } else {   } else {
     print $client "error: ".($!+0)      &Reply($client, "ok\n", "$cmd:$tail");
  ." tie(GDBM) Failed ".  
  "while attempting get\n";  
  }   }
     }      }
  } else {   } else {
     Reply($client, "refused\n", $userinput);      &Failure($client, "not_home\n", "$cmd:$tail");
       
  }   }
 # ------------------------------------------------------------------------ eget      }
     } elsif ($userinput =~ /^eget/) {      return 1;
  if (isClient) {  }
     my ($cmd,$udom,$uname,$namespace,$what)  &register_handler("renameuserfile", \&rename_user_file_handler, 0,1,0);
  =split(/:/,$userinput);  
     $namespace=~s/\//\_/g;  #
     $namespace=~s/\W//g;  #  Authenticate access to a user file by checking that the token the user's 
     chomp($what);  #  passed also exists in their session file
     my @queries=split(/\&/,$what);  #
     my $proname=propath($udom,$uname);  # Parameters:
     my $qresult='';  #   cmd      - The request keyword that dispatched to tus.
     my %hash;  #   tail     - The tail of the request (colon separated parameters).
     if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) {  #   client   - Filehandle open on the client.
  for (my $i=0;$i<=$#queries;$i++) {  # Return:
     $qresult.="$hash{$queries[$i]}&";  #    1.
  }  sub token_auth_user_file_handler {
  if (untie(%hash)) {      my ($cmd, $tail, $client) = @_;
     $qresult=~s/\&$//;  
     if ($cipher) {      my ($fname, $session) = split(/:/, $tail);
  my $cmdlength=length($qresult);      
  $qresult.="         ";      chomp($session);
  my $encqresult='';      my $reply="non_auth\n";
  for       if (open(ENVIN,$perlvar{'lonIDsDir'}.'/'.
     (my $encidx=0;$encidx<=$cmdlength;$encidx+=8) {       $session.'.id')) {
  $encqresult.=   while (my $line=<ENVIN>) {
     unpack("H16",      if ($line=~ m|userfile\.\Q$fname\E\=|) { $reply="ok\n"; }
    $cipher->encrypt(substr($qresult,$encidx,8)));  
     }  
  print $client "enc:$cmdlength:$encqresult\n";  
     } else {  
  print $client "error:no_key\n";  
     }  
  } else {  
     print $client "error: ".($!+0)  
  ." untie(GDBM) Failed ".  
  "while attempting eget\n";  
  }  
     } else {  
  print $client "error: ".($!+0)  
     ." tie(GDBM) Failed ".  
     "while attempting eget\n";  
     }  
  } else {  
     Reply($client, "refused\n", $userinput);  
       
  }   }
 # ------------------------------------------------------------------------- del   close(ENVIN);
     } elsif ($userinput =~ /^del/) {   &Reply($client, $reply, "$cmd:$tail");
  if(isClient) {      } else {
     my ($cmd,$udom,$uname,$namespace,$what)   &Failure($client, "invalid_token\n", "$cmd:$tail");
  =split(/:/,$userinput);      }
     $namespace=~s/\//\_/g;      return 1;
     $namespace=~s/\W//g;  
     chomp($what);  }
     my $proname=propath($udom,$uname);  &register_handler("tokenauthuserfile", \&token_auth_user_file_handler, 0,1,0);
     my $now=time;  
     my @keys=split(/\&/,$what);  #
     my %hash;  #   Unsubscribe from a resource.
     if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) {  #
  unless ($namespace=~/^nohist\_/) {  # Parameters:
     my $hfh;  #    $cmd      - The command that got us here.
     if ($hfh=IO::File->new(">>$proname/$namespace.hist")) { print $hfh "D:$now:$what\n"; }  #    $tail     - Tail of the command (remaining parameters).
  }  #    $client   - File descriptor connected to client.
  foreach my $key (@keys) {  # Returns
     delete($hash{$key});  #     0        - Requested to exit, caller should shut down.
  }  #     1        - Continue processing.
  if (untie(%hash)) {  #
     print $client "ok\n";  sub unsubscribe_handler {
  } else {      my ($cmd, $tail, $client) = @_;
     print $client "error: ".($!+0)  
  ." untie(GDBM) Failed ".      my $userinput= "$cmd:$tail";
  "while attempting del\n";      
  }      my ($fname) = split(/:/,$tail); # Split in case there's extrs.
     } else {  
  print $client "error: ".($!+0)      &Debug("Unsubscribing $fname");
     ." tie(GDBM) Failed ".      if (-e $fname) {
     "while attempting del\n";   &Debug("Exists");
    &Reply($client, &unsub($fname,$clientip), $userinput);
       } else {
    &Failure($client, "not_found\n", $userinput);
       }
       return 1;
   }
   &register_handler("unsub", \&unsubscribe_handler, 0, 1, 0);
   
   #   Subscribe to a resource
   #
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   #
   sub subscribe_handler {
       my ($cmd, $tail, $client)= @_;
   
       my $userinput  = "$cmd:$tail";
   
       &Reply( $client, &subscribe($userinput,$clientip), $userinput);
   
       return 1;
   }
   &register_handler("sub", \&subscribe_handler, 0, 1, 0);
   
   #
   #   Determine the version of a resource (?) Or is it return
   #   the top version of the resource?  Not yet clear from the
   #   code in currentversion.
   #
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   #
   sub current_version_handler {
       my ($cmd, $tail, $client) = @_;
   
       my $userinput= "$cmd:$tail";
      
       my $fname   = $tail;
       &Reply( $client, &currentversion($fname)."\n", $userinput);
       return 1;
   
   }
   &register_handler("currentversion", \&current_version_handler, 0, 1, 0);
   
   #  Make an entry in a user's activity log.
   #
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   #
   sub activity_log_handler {
       my ($cmd, $tail, $client) = @_;
   
   
       my $userinput= "$cmd:$tail";
   
       my ($udom,$uname,$what)=split(/:/,$tail);
       chomp($what);
       my $proname=&propath($udom,$uname);
       my $now=time;
       my $hfh;
       if ($hfh=IO::File->new(">>$proname/activity.log")) { 
    print $hfh "$now:$clientname:$what\n";
    &Reply( $client, "ok\n", $userinput); 
       } else {
    &Failure($client, "error: ".($!+0)." IO::File->new Failed "
    ."while attempting log\n", 
    $userinput);
       }
   
       return 1;
   }
   &register_handler("log", \&activity_log_handler, 0, 1, 0);
   
   #
   #   Put a namespace entry in a user profile hash.
   #   My druthers would be for this to be an encrypted interaction too.
   #   anything that might be an inadvertent covert channel about either
   #   user authentication or user personal information....
   #
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   #
   sub put_user_profile_entry {
       my ($cmd, $tail, $client)  = @_;
   
       my $userinput = "$cmd:$tail";
       
       my ($udom,$uname,$namespace,$what) =split(/:/,$tail,4);
       if ($namespace ne 'roles') {
    chomp($what);
    my $hashref = &tie_user_hash($udom, $uname, $namespace,
     &GDBM_WRCREAT(),"P",$what);
    if($hashref) {
       my @pairs=split(/\&/,$what);
       foreach my $pair (@pairs) {
    my ($key,$value)=split(/=/,$pair);
    $hashref->{$key}=$value;
     }      }
  } else {      if (untie(%$hashref)) {
     Reply($client, "refused\n", $userinput);   &Reply( $client, "ok\n", $userinput);
       
  }  
 # ------------------------------------------------------------------------ keys  
     } elsif ($userinput =~ /^keys/) {  
  if(isClient) {  
     my ($cmd,$udom,$uname,$namespace)  
  =split(/:/,$userinput);  
     $namespace=~s/\//\_/g;  
     $namespace=~s/\W//g;  
     my $proname=propath($udom,$uname);  
     my $qresult='';  
     my %hash;  
     if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) {  
  foreach my $key (keys %hash) {  
     $qresult.="$key&";  
  }  
  if (untie(%hash)) {  
     $qresult=~s/\&$//;  
     print $client "$qresult\n";  
  } else {  
     print $client "error: ".($!+0)  
  ." untie(GDBM) Failed ".  
  "while attempting keys\n";  
  }  
     } else {      } else {
  print $client "error: ".($!+0)   &Failure($client, "error: ".($!+0)." untie(GDBM) failed ".
     ." tie(GDBM) Failed ".   "while attempting put\n", 
     "while attempting keys\n";   $userinput);
     }      }
  } else {   } else {
     Reply($client, "refused\n", $userinput);      &Failure( $client, "error: ".($!)." tie(GDBM) Failed ".
            "while attempting put\n", $userinput);
  }   }
 # ----------------------------------------------------------------- dumpcurrent      } else {
     } elsif ($userinput =~ /^currentdump/) {          &Failure( $client, "refused\n", $userinput);
  if (isClient) {      }
     my ($cmd,$udom,$uname,$namespace)      
  =split(/:/,$userinput);      return 1;
     $namespace=~s/\//\_/g;  }
     $namespace=~s/\W//g;  &register_handler("put", \&put_user_profile_entry, 0, 1, 0);
     my $qresult='';  
     my $proname=propath($udom,$uname);  # 
     my %hash;  #   Increment a profile entry in the user history file.
     if (tie(%hash,'GDBM_File',  #   The history contains keyword value pairs.  In this case,
     "$proname/$namespace.db",  #   The value itself is a pair of numbers.  The first, the current value
     &GDBM_READER(),0640)) {  #   the second an increment that this function applies to the current
     # Structure of %data:  #   value.
  # $data{$symb}->{$parameter}=$value;  #
  # $data{$symb}->{'v.'.$parameter}=$version;  # Parameters:
  # since $parameter will be unescaped, we do not  #    $cmd      - The command that got us here.
  # have to worry about silly parameter names...  #    $tail     - Tail of the command (remaining parameters).
  my %data = ();  #    $client   - File descriptor connected to client.
  while (my ($key,$value) = each(%hash)) {  # Returns
     my ($v,$symb,$param) = split(/:/,$key);  #     0        - Requested to exit, caller should shut down.
     next if ($v eq 'version' || $symb eq 'keys');  #     1        - Continue processing.
     next if (exists($data{$symb}) &&   #
      exists($data{$symb}->{$param}) &&  sub increment_user_value_handler {
      $data{$symb}->{'v.'.$param} > $v);      my ($cmd, $tail, $client) = @_;
     $data{$symb}->{$param}=$value;      
     $data{$symb}->{'v.'.$param}=$v;      my $userinput   = "$cmd:$tail";
  }      
  if (untie(%hash)) {      my ($udom,$uname,$namespace,$what) =split(/:/,$tail);
     while (my ($symb,$param_hash) = each(%data)) {      if ($namespace ne 'roles') {
  while(my ($param,$value) = each (%$param_hash)){          chomp($what);
     next if ($param =~ /^v\./);   my $hashref = &tie_user_hash($udom, $uname,
     $qresult.=$symb.':'.$param.'='.$value.'&';       $namespace, &GDBM_WRCREAT(),
  }       "P",$what);
     }   if ($hashref) {
     chop($qresult);      my @pairs=split(/\&/,$what);
     print $client "$qresult\n";      foreach my $pair (@pairs) {
  } else {   my ($key,$value)=split(/=/,$pair);
     print $client "error: ".($!+0)   # We could check that we have a number...
  ." untie(GDBM) Failed ".   if (! defined($value) || $value eq '') {
  "while attempting currentdump\n";      $value = 1;
  }   }
     } else {   $hashref->{$key}+=$value;
  print $client "error: ".($!+0)  
     ." tie(GDBM) Failed ".  
     "while attempting currentdump\n";  
     }  
  } else {  
     Reply($client, "refused\n", $userinput);  
  }  
 # ------------------------------------------------------------------------ dump  
     } elsif ($userinput =~ /^dump/) {  
  if(isClient) {  
     my ($cmd,$udom,$uname,$namespace,$regexp)  
  =split(/:/,$userinput);  
     $namespace=~s/\//\_/g;  
     $namespace=~s/\W//g;  
     if (defined($regexp)) {  
  $regexp=&unescape($regexp);  
     } else {  
  $regexp='.';  
     }      }
     my $qresult='';      if (untie(%$hashref)) {
     my $proname=propath($udom,$uname);   &Reply( $client, "ok\n", $userinput);
     my %hash;  
     if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) {  
  while (my ($key,$value) = each(%hash)) {  
     if ($regexp eq '.') {  
  $qresult.=$key.'='.$value.'&';  
     } else {  
  my $unescapeKey = &unescape($key);  
  if (eval('$unescapeKey=~/$regexp/')) {  
     $qresult.="$key=$value&";  
  }  
     }  
  }  
  if (untie(%hash)) {  
     chop($qresult);  
     print $client "$qresult\n";  
  } else {  
     print $client "error: ".($!+0)  
  ." untie(GDBM) Failed ".  
  "while attempting dump\n";  
  }  
     } else {      } else {
  print $client "error: ".($!+0)   &Failure($client, "error: ".($!+0)." untie(GDBM) failed ".
     ." tie(GDBM) Failed ".   "while attempting inc\n", $userinput);
     "while attempting dump\n";  
     }      }
  } else {   } else {
     Reply($client, "refused\n", $userinput);      &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
            "while attempting inc\n", $userinput);
  }   }
 # ----------------------------------------------------------------------- store      } else {
     } elsif ($userinput =~ /^store/) {   &Failure($client, "refused\n", $userinput);
  if(isClient) {      }
     my ($cmd,$udom,$uname,$namespace,$rid,$what)      
  =split(/:/,$userinput);      return 1;
     $namespace=~s/\//\_/g;  }
     $namespace=~s/\W//g;  &register_handler("inc", \&increment_user_value_handler, 0, 1, 0);
     if ($namespace ne 'roles') {  
  chomp($what);  #
  my $proname=propath($udom,$uname);  #   Put a new role for a user.  Roles are LonCAPA's packaging of permissions.
  my $now=time;  #   Each 'role' a user has implies a set of permissions.  Adding a new role
  my @pairs=split(/\&/,$what);  #   for a person grants the permissions packaged with that role
  my %hash;  #   to that user when the role is selected.
  if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) {  #
     unless ($namespace=~/^nohist\_/) {  # Parameters:
  my $hfh;  #    $cmd       - The command string (rolesput).
  if ($hfh=IO::File->new(">>$proname/$namespace.hist")) {  #    $tail      - The remainder of the request line.  For rolesput this
     print $hfh "P:$now:$rid:$what\n";  #                 consists of a colon separated list that contains:
  }  #                 The domain and user that is granting the role (logged).
     }  #                 The domain and user that is getting the role.
     my @previouskeys=split(/&/,$hash{"keys:$rid"});  #                 The roles being granted as a set of & separated pairs.
     my $key;  #                 each pair a key value pair.
     $hash{"version:$rid"}++;  #    $client    - File descriptor connected to the client.
     my $version=$hash{"version:$rid"};  # Returns:
     my $allkeys='';   #     0         - If the daemon should exit
     foreach my $pair (@pairs) {  #     1         - To continue processing.
  my ($key,$value)=split(/=/,$pair);  #
  $allkeys.=$key.':';  #
  $hash{"$version:$rid:$key"}=$value;  sub roles_put_handler {
     }      my ($cmd, $tail, $client) = @_;
     $hash{"$version:$rid:timestamp"}=$now;  
     $allkeys.='timestamp';      my $userinput  = "$cmd:$tail";
     $hash{"$version:keys:$rid"}=$allkeys;  
     if (untie(%hash)) {      my ( $exedom, $exeuser, $udom, $uname,  $what) = split(/:/,$tail);
  print $client "ok\n";      
     } else {  
  print $client "error: ".($!+0)      my $namespace='roles';
     ." untie(GDBM) Failed ".      chomp($what);
     "while attempting store\n";      my $hashref = &tie_user_hash($udom, $uname, $namespace,
  }   &GDBM_WRCREAT(), "P",
  } else {   "$exedom:$exeuser:$what");
     print $client "error: ".($!+0)      #
  ." tie(GDBM) Failed ".      #  Log the attempt to set a role.  The {}'s here ensure that the file 
  "while attempting store\n";      #  handle is open for the minimal amount of time.  Since the flush
  }      #  is done on close this improves the chances the log will be an un-
     } else {      #  corrupted ordered thing.
  print $client "refused\n";      if ($hashref) {
     }   my $pass_entry = &get_auth_type($udom, $uname);
    my ($auth_type,$pwd)  = split(/:/, $pass_entry);
    $auth_type = $auth_type.":";
    my @pairs=split(/\&/,$what);
    foreach my $pair (@pairs) {
       my ($key,$value)=split(/=/,$pair);
       &manage_permissions($key, $udom, $uname,
          $auth_type);
       $hashref->{$key}=$value;
    }
    if (untie($hashref)) {
       &Reply($client, "ok\n", $userinput);
  } else {   } else {
     Reply($client, "refused\n", $userinput);      &Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ".
            "while attempting rolesput\n", $userinput);
  }   }
 # --------------------------------------------------------------------- restore      } else {
     } elsif ($userinput =~ /^restore/) {   &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
  if(isClient) {   "while attempting rolesput\n", $userinput);
     my ($cmd,$udom,$uname,$namespace,$rid)      }
  =split(/:/,$userinput);      return 1;
     $namespace=~s/\//\_/g;  }
     $namespace=~s/\W//g;  &register_handler("rolesput", \&roles_put_handler, 1,1,0);  # Encoded client only.
     chomp($rid);  
     my $proname=propath($udom,$uname);  #
     my $qresult='';  #   Deletes (removes) a role for a user.   This is equivalent to removing
     my %hash;  #  a permissions package associated with the role from the user's profile.
     if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) {  #
  my $version=$hash{"version:$rid"};  # Parameters:
  $qresult.="version=$version&";  #     $cmd                 - The command (rolesdel)
  my $scope;  #     $tail                - The remainder of the request line. This consists
  for ($scope=1;$scope<=$version;$scope++) {  #                             of:
     my $vkeys=$hash{"$scope:keys:$rid"};  #                             The domain and user requesting the change (logged)
     my @keys=split(/:/,$vkeys);  #                             The domain and user being changed.
     my $key;  #                             The roles being revoked.  These are shipped to us
     $qresult.="$scope:keys=$vkeys&";  #                             as a bunch of & separated role name keywords.
     foreach $key (@keys) {  #     $client              - The file handle open on the client.
  $qresult.="$scope:$key=".$hash{"$scope:$rid:$key"}."&";  # Returns:
     }                                    #     1                    - Continue processing
  }  #     0                    - Exit.
  if (untie(%hash)) {  #
     $qresult=~s/\&$//;  sub roles_delete_handler {
     print $client "$qresult\n";      my ($cmd, $tail, $client)  = @_;
  } else {  
     print $client "error: ".($!+0)      my $userinput    = "$cmd:$tail";
  ." untie(GDBM) Failed ".     
  "while attempting restore\n";      my ($exedom,$exeuser,$udom,$uname,$what)=split(/:/,$tail);
  }      &Debug("cmd = ".$cmd." exedom= ".$exedom."user = ".$exeuser." udom=".$udom.
     } else {     "what = ".$what);
  print $client "error: ".($!+0)      my $namespace='roles';
     ." tie(GDBM) Failed ".      chomp($what);
     "while attempting restore\n";      my $hashref = &tie_user_hash($udom, $uname, $namespace,
     }   &GDBM_WRCREAT(), "D",
  } else  {   "$exedom:$exeuser:$what");
     Reply($client, "refused\n", $userinput);      
           if ($hashref) {
    my @rolekeys=split(/\&/,$what);
   
    foreach my $key (@rolekeys) {
       delete $hashref->{$key};
  }   }
 # -------------------------------------------------------------------- chatsend   if (untie(%$hashref)) {
     } elsif ($userinput =~ /^chatsend/) {      &Reply($client, "ok\n", $userinput);
  if(isClient) {  
     my ($cmd,$cdom,$cnum,$newpost)=split(/\:/,$userinput);  
     &chatadd($cdom,$cnum,$newpost);  
     print $client "ok\n";  
  } else {   } else {
     Reply($client, "refused\n", $userinput);      &Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ".
            "while attempting rolesdel\n", $userinput);
  }   }
 # -------------------------------------------------------------------- chatretr      } else {
     } elsif ($userinput =~ /^chatretr/) {          &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
  if(isClient) {   "while attempting rolesdel\n", $userinput);
     my       }
  ($cmd,$cdom,$cnum,$udom,$uname)=split(/\:/,$userinput);      
     my $reply='';      return 1;
     foreach (&getchat($cdom,$cnum,$udom,$uname)) {  }
  $reply.=&escape($_).':';  &register_handler("rolesdel", \&roles_delete_handler, 1,1, 0); # Encoded client only
   
   # Unencrypted get from a user's profile database.  See 
   # GetProfileEntryEncrypted for a version that does end-to-end encryption.
   # This function retrieves a keyed item from a specific named database in the
   # user's directory.
   #
   # Parameters:
   #   $cmd             - Command request keyword (get).
   #   $tail            - Tail of the command.  This is a colon separated list
   #                      consisting of the domain and username that uniquely
   #                      identifies the profile,
   #                      The 'namespace' which selects the gdbm file to 
   #                      do the lookup in, 
   #                      & separated list of keys to lookup.  Note that
   #                      the values are returned as an & separated list too.
   #   $client          - File descriptor open on the client.
   # Returns:
   #   1       - Continue processing.
   #   0       - Exit.
   #
   sub get_profile_entry {
       my ($cmd, $tail, $client) = @_;
   
       my $userinput= "$cmd:$tail";
      
       my ($udom,$uname,$namespace,$what) = split(/:/,$tail);
       chomp($what);
   
       my $replystring = read_profile($udom, $uname, $namespace, $what);
       my ($first) = split(/:/,$replystring);
       if($first ne "error") {
    &Reply($client, "$replystring\n", $userinput);
       } else {
    &Failure($client, $replystring." while attempting get\n", $userinput);
       }
       return 1;
   
   
   }
   &register_handler("get", \&get_profile_entry, 0,1,0);
   
   #
   #  Process the encrypted get request.  Note that the request is sent
   #  in clear, but the reply is encrypted.  This is a small covert channel:
   #  information about the sensitive keys is given to the snooper.  Just not
   #  information about the values of the sensitive key.  Hmm if I wanted to
   #  know these I'd snoop for the egets. Get the profile item names from them
   #  and then issue a get for them since there's no enforcement of the
   #  requirement of an encrypted get for particular profile items.  If I
   #  were re-doing this, I'd force the request to be encrypted as well as the
   #  reply.  I'd also just enforce encrypted transactions for all gets since
   #  that would prevent any covert channel snooping.
   #
   #  Parameters:
   #     $cmd               - Command keyword of request (eget).
   #     $tail              - Tail of the command.  See GetProfileEntry #                          for more information about this.
   #     $client            - File open on the client.
   #  Returns:
   #     1      - Continue processing
   #     0      - server should exit.
   sub get_profile_entry_encrypted {
       my ($cmd, $tail, $client) = @_;
   
       my $userinput = "$cmd:$tail";
      
       my ($cmd,$udom,$uname,$namespace,$what) = split(/:/,$userinput);
       chomp($what);
       my $qresult = read_profile($udom, $uname, $namespace, $what);
       my ($first) = split(/:/, $qresult);
       if($first ne "error") {
   
    if ($cipher) {
       my $cmdlength=length($qresult);
       $qresult.="         ";
       my $encqresult='';
       for(my $encidx=0;$encidx<=$cmdlength;$encidx+=8) {
    $encqresult.= unpack("H16", 
        $cipher->encrypt(substr($qresult,
        $encidx,
        8)));
     }      }
     $reply=~s/\:$//;      &Reply( $client, "enc:$cmdlength:$encqresult\n", $userinput);
     print $client $reply."\n";  
  } else {   } else {
     Reply($client, "refused\n", $userinput);   &Failure( $client, "error:no_key\n", $userinput);
           }
       } else {
    &Failure($client, "$qresult while attempting eget\n", $userinput);
   
       }
       
       return 1;
   }
   &register_handler("eget", \&get_profile_entry_encrypted, 0, 1, 0);
   
   #
   #   Deletes a key in a user profile database.
   #   
   #   Parameters:
   #       $cmd                  - Command keyword (del).
   #       $tail                 - Command tail.  IN this case a colon
   #                               separated list containing:
   #                               The domain and user that identifies uniquely
   #                               the identity of the user.
   #                               The profile namespace (name of the profile
   #                               database file).
   #                               & separated list of keywords to delete.
   #       $client              - File open on client socket.
   # Returns:
   #     1   - Continue processing
   #     0   - Exit server.
   #
   #
   sub delete_profile_entry {
       my ($cmd, $tail, $client) = @_;
   
       my $userinput = "cmd:$tail";
   
       my ($udom,$uname,$namespace,$what) = split(/:/,$tail);
       chomp($what);
       my $hashref = &tie_user_hash($udom, $uname, $namespace,
    &GDBM_WRCREAT(),
    "D",$what);
       if ($hashref) {
           my @keys=split(/\&/,$what);
    foreach my $key (@keys) {
       delete($hashref->{$key});
  }   }
 # ------------------------------------------------------------------- querysend   if (untie(%$hashref)) {
     } elsif ($userinput =~ /^querysend/) {      &Reply($client, "ok\n", $userinput);
  if (isClient) {  
     my ($cmd,$query,  
  $arg1,$arg2,$arg3)=split(/\:/,$userinput);  
     $query=~s/\n*$//g;  
     print $client "".  
  sqlreply("$clientname\&$query".  
  "\&$arg1"."\&$arg2"."\&$arg3")."\n";  
  } else {   } else {
     Reply($client, "refused\n", $userinput);      &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
           "while attempting del\n", $userinput);
  }   }
 # ------------------------------------------------------------------ queryreply      } else {
     } elsif ($userinput =~ /^queryreply/) {   &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
  if(isClient) {   "while attempting del\n", $userinput);
     my ($cmd,$id,$reply)=split(/:/,$userinput);       }
     my $store;      return 1;
     my $execdir=$perlvar{'lonDaemons'};  }
     if ($store=IO::File->new(">$execdir/tmp/$id")) {  &register_handler("del", \&delete_profile_entry, 0, 1, 0);
  $reply=~s/\&/\n/g;  
  print $store $reply;  #
  close $store;  #  List the set of keys that are defined in a profile database file.
  my $store2=IO::File->new(">$execdir/tmp/$id.end");  #  A successful reply from this will contain an & separated list of
  print $store2 "done\n";  #  the keys. 
  close $store2;  # Parameters:
  print $client "ok\n";  #     $cmd              - Command request (keys).
     }  #     $tail             - Remainder of the request, a colon separated
     else {  #                         list containing domain/user that identifies the
  print $client "error: ".($!+0)  #                         user being queried, and the database namespace
     ." IO::File->new Failed ".  #                         (database filename essentially).
     "while attempting queryreply\n";  #     $client           - File open on the client.
     }  #  Returns:
   #    1    - Continue processing.
   #    0    - Exit the server.
   #
   sub get_profile_keys {
       my ($cmd, $tail, $client) = @_;
   
       my $userinput = "$cmd:$tail";
   
       my ($udom,$uname,$namespace)=split(/:/,$tail);
       my $qresult='';
       my $hashref = &tie_user_hash($udom, $uname, $namespace,
     &GDBM_READER());
       if ($hashref) {
    foreach my $key (keys %$hashref) {
       $qresult.="$key&";
    }
    if (untie(%$hashref)) {
       $qresult=~s/\&$//;
       &Reply($client, "$qresult\n", $userinput);
  } else {   } else {
     Reply($client, "refused\n", $userinput);      &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
           "while attempting keys\n", $userinput);
  }   }
 # ----------------------------------------------------------------- courseidput      } else {
     } elsif ($userinput =~ /^courseidput/) {   &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
  if(isClient) {   "while attempting keys\n", $userinput);
     my ($cmd,$udom,$what)=split(/:/,$userinput);      }
     chomp($what);     
  $udom=~s/\W//g;      return 1;
     my $proname=  }
  "$perlvar{'lonUsersDir'}/$udom/nohist_courseids";  &register_handler("keys", \&get_profile_keys, 0, 1, 0);
     my $now=time;  
     my @pairs=split(/\&/,$what);  #
     my %hash;  #   Dump the contents of a user profile database.
     if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_WRCREAT(),0640)) {  #   Note that this constitutes a very large covert channel too since
  foreach my $pair (@pairs) {  #   the dump will return sensitive information that is not encrypted.
     my ($key,$descr,$inst_code)=split(/=/,$pair);  #   The naive security assumption is that the session negotiation ensures
     $hash{$key}=$descr.':'.$inst_code.':'.$now;  #   our client is trusted and I don't believe that's assured at present.
  }  #   Sure want badly to go to ssl or tls.  Of course if my peer isn't really
  if (untie(%hash)) {  #   a LonCAPA node they could have negotiated an encryption key too so >sigh<.
     print $client "ok\n";  # 
  } else {  #  Parameters:
     print $client "error: ".($!+0)  #     $cmd           - The command request keyword (currentdump).
  ." untie(GDBM) Failed ".  #     $tail          - Remainder of the request, consisting of a colon
  "while attempting courseidput\n";  #                      separated list that has the domain/username and
   #                      the namespace to dump (database file).
   #     $client        - file open on the remote client.
   # Returns:
   #     1    - Continue processing.
   #     0    - Exit the server.
   #
   sub dump_profile_database {
       my ($cmd, $tail, $client) = @_;
   
       my $userinput = "$cmd:$tail";
      
       my ($udom,$uname,$namespace) = split(/:/,$tail);
       my $hashref = &tie_user_hash($udom, $uname, $namespace,
    &GDBM_READER());
       if ($hashref) {
    # Structure of %data:
    # $data{$symb}->{$parameter}=$value;
    # $data{$symb}->{'v.'.$parameter}=$version;
    # since $parameter will be unescaped, we do not
     # have to worry about silly parameter names...
   
           my $qresult='';
    my %data = ();                     # A hash of anonymous hashes..
    while (my ($key,$value) = each(%$hashref)) {
       my ($v,$symb,$param) = split(/:/,$key);
       next if ($v eq 'version' || $symb eq 'keys');
       next if (exists($data{$symb}) && 
        exists($data{$symb}->{$param}) &&
        $data{$symb}->{'v.'.$param} > $v);
       $data{$symb}->{$param}=$value;
       $data{$symb}->{'v.'.$param}=$v;
    }
    if (untie(%$hashref)) {
       while (my ($symb,$param_hash) = each(%data)) {
    while(my ($param,$value) = each (%$param_hash)){
       next if ($param =~ /^v\./);       # Ignore versions...
       #
       #   Just dump the symb=value pairs separated by &
       #
       $qresult.=$symb.':'.$param.'='.$value.'&';
  }   }
     } else {  
  print $client "error: ".($!+0)  
     ." tie(GDBM) Failed ".  
     "while attempting courseidput\n";  
     }      }
       chop($qresult);
       &Reply($client , "$qresult\n", $userinput);
  } else {   } else {
     Reply($client, "refused\n", $userinput);      &Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ".
            "while attempting currentdump\n", $userinput);
  }   }
 # ---------------------------------------------------------------- courseiddump      } else {
     } elsif ($userinput =~ /^courseiddump/) {   &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
  if(isClient) {   "while attempting currentdump\n", $userinput);
     my ($cmd,$udom,$since,$description)      }
  =split(/:/,$userinput);  
     if (defined($description)) {      return 1;
  $description=&unescape($description);  }
   &register_handler("currentdump", \&dump_profile_database, 0, 1, 0);
   
   #
   #   Dump a profile database with an optional regular expression
   #   to match against the keys.  In this dump, no effort is made
   #   to separate symb from version information. Presumably the
   #   databases that are dumped by this command are of a different
   #   structure.  Need to look at this and improve the documentation of
   #   both this and the currentdump handler.
   # Parameters:
   #    $cmd                     - The command keyword.
   #    $tail                    - All of the characters after the $cmd:
   #                               These are expected to be a colon
   #                               separated list containing:
   #                               domain/user - identifying the user.
   #                               namespace   - identifying the database.
   #                               regexp      - optional regular expression
   #                                             that is matched against
   #                                             database keywords to do
   #                                             selective dumps.
   #   $client                   - Channel open on the client.
   # Returns:
   #    1    - Continue processing.
   # Side effects:
   #    response is written to $client.
   #
   sub dump_with_regexp {
       my ($cmd, $tail, $client) = @_;
   
   
       my $userinput = "$cmd:$tail";
   
       my ($udom,$uname,$namespace,$regexp)=split(/:/,$tail);
       if (defined($regexp)) {
    $regexp=&unescape($regexp);
       } else {
    $regexp='.';
       }
       my $hashref = &tie_user_hash($udom, $uname, $namespace,
    &GDBM_READER());
       if ($hashref) {
           my $qresult='';
    while (my ($key,$value) = each(%$hashref)) {
       if ($regexp eq '.') {
    $qresult.=$key.'='.$value.'&';
     } else {      } else {
  $description='.';   my $unescapeKey = &unescape($key);
     }   if (eval('$unescapeKey=~/$regexp/')) {
     unless (defined($since)) { $since=0; }      $qresult.="$key=$value&";
     my $qresult='';  
     my $proname=  
  "$perlvar{'lonUsersDir'}/$udom/nohist_courseids";  
     my %hash;  
     if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_READER(),0640)) {  
  while (my ($key,$value) = each(%hash)) {  
     my ($descr,$lasttime,$inst_code);  
     if ($value =~ m/^([^\:]*):([^\:]*):(\d+)$/) {  
  ($descr,$inst_code,$lasttime)=($1,$2,$3);  
     } else {  
  ($descr,$lasttime) = split(/\:/,$value);  
     }  
     if ($lasttime<$since) { next; }  
     if ($description eq '.') {  
  $qresult.=$key.'='.$descr.':'.$inst_code.'&';  
     } else {  
  my $unescapeVal = &unescape($descr);  
  if (eval('$unescapeVal=~/\Q$description\E/i')) {  
     $qresult.=$key.'='.$descr.':'.$inst_code.'&';  
  }  
     }  
  }  
  if (untie(%hash)) {  
     chop($qresult);  
     print $client "$qresult\n";  
  } else {  
     print $client "error: ".($!+0)  
  ." untie(GDBM) Failed ".  
  "while attempting courseiddump\n";  
  }   }
     } else {  
  print $client "error: ".($!+0)  
     ." tie(GDBM) Failed ".  
     "while attempting courseiddump\n";  
     }      }
  } else {  
     Reply($client, "refused\n", $userinput);  
       
  }   }
 # ----------------------------------------------------------------------- idput   if (untie(%$hashref)) {
     } elsif ($userinput =~ /^idput/) {      chop($qresult);
  if(isClient) {      &Reply($client, "$qresult\n", $userinput);
     my ($cmd,$udom,$what)=split(/:/,$userinput);  
     chomp($what);  
     $udom=~s/\W//g;  
     my $proname="$perlvar{'lonUsersDir'}/$udom/ids";  
     my $now=time;  
     my @pairs=split(/\&/,$what);  
     my %hash;  
     if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_WRCREAT(),0640)) {  
  {  
     my $hfh;  
     if ($hfh=IO::File->new(">>$proname.hist")) {  
  print $hfh "P:$now:$what\n";  
     }  
  }  
  foreach my $pair (@pairs) {  
     my ($key,$value)=split(/=/,$pair);  
     $hash{$key}=$value;  
  }  
  if (untie(%hash)) {  
     print $client "ok\n";  
  } else {  
     print $client "error: ".($!+0)  
  ." untie(GDBM) Failed ".  
  "while attempting idput\n";  
  }  
     } else {  
  print $client "error: ".($!+0)  
     ." tie(GDBM) Failed ".  
     "while attempting idput\n";  
     }  
  } else {   } else {
     Reply($client, "refused\n", $userinput);      &Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ".
            "while attempting dump\n", $userinput);
  }   }
 # ----------------------------------------------------------------------- idget      } else {
     } elsif ($userinput =~ /^idget/) {   &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
  if(isClient) {   "while attempting dump\n", $userinput);
     my ($cmd,$udom,$what)=split(/:/,$userinput);      }
     chomp($what);  
     $udom=~s/\W//g;      return 1;
     my $proname="$perlvar{'lonUsersDir'}/$udom/ids";  }
     my @queries=split(/\&/,$what);  &register_handler("dump", \&dump_with_regexp, 0, 1, 0);
     my $qresult='';  
     my %hash;  #  Store a set of key=value pairs associated with a versioned name.
     if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_READER(),0640)) {  #
  for (my $i=0;$i<=$#queries;$i++) {  #  Parameters:
     $qresult.="$hash{$queries[$i]}&";  #    $cmd                - Request command keyword.
  }  #    $tail               - Tail of the request.  This is a colon
  if (untie(%hash)) {  #                          separated list containing:
     $qresult=~s/\&$//;  #                          domain/user - User and authentication domain.
     print $client "$qresult\n";  #                          namespace   - Name of the database being modified
  } else {  #                          rid         - Resource keyword to modify.
     print $client "error: ".($!+0)  #                          what        - new value associated with rid.
  ." untie(GDBM) Failed ".  #
  "while attempting idget\n";  #    $client             - Socket open on the client.
  }  #
   #
   #  Returns:
   #      1 (keep on processing).
   #  Side-Effects:
   #    Writes to the client
   sub store_handler {
       my ($cmd, $tail, $client) = @_;
    
       my $userinput = "$cmd:$tail";
   
       my ($udom,$uname,$namespace,$rid,$what) =split(/:/,$tail);
       if ($namespace ne 'roles') {
   
    chomp($what);
    my @pairs=split(/\&/,$what);
    my $hashref  = &tie_user_hash($udom, $uname, $namespace,
          &GDBM_WRCREAT(), "P",
          "$rid:$what");
    if ($hashref) {
       my $now = time;
       my @previouskeys=split(/&/,$hashref->{"keys:$rid"});
       my $key;
       $hashref->{"version:$rid"}++;
       my $version=$hashref->{"version:$rid"};
       my $allkeys=''; 
       foreach my $pair (@pairs) {
    my ($key,$value)=split(/=/,$pair);
    $allkeys.=$key.':';
    $hashref->{"$version:$rid:$key"}=$value;
       }
       $hashref->{"$version:$rid:timestamp"}=$now;
       $allkeys.='timestamp';
       $hashref->{"$version:keys:$rid"}=$allkeys;
       if (untie($hashref)) {
    &Reply($client, "ok\n", $userinput);
     } else {      } else {
  print $client "error: ".($!+0)   &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
     ." tie(GDBM) Failed ".   "while attempting store\n", $userinput);
     "while attempting idget\n";  
     }      }
  } else {   } else {
     Reply($client, "refused\n", $userinput);      &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
            "while attempting store\n", $userinput);
  }   }
 # ---------------------------------------------------------------------- tmpput      } else {
     } elsif ($userinput =~ /^tmpput/) {   &Failure($client, "refused\n", $userinput);
  if(isClient) {      }
     my ($cmd,$what)=split(/:/,$userinput);  
     my $store;      return 1;
     $tmpsnum++;  }
     my $id=$$.'_'.$clientip.'_'.$tmpsnum;  &register_handler("store", \&store_handler, 0, 1, 0);
     $id=~s/\W/\_/g;  
     $what=~s/\n//g;  #
     my $execdir=$perlvar{'lonDaemons'};  #  Dump out all versions of a resource that has key=value pairs associated
     if ($store=IO::File->new(">$execdir/tmp/$id.tmp")) {  # with it for each version.  These resources are built up via the store
  print $store $what;  # command.
  close $store;  #
  print $client "$id\n";  #  Parameters:
     }  #     $cmd               - Command keyword.
     else {  #     $tail              - Remainder of the request which consists of:
  print $client "error: ".($!+0)  #                          domain/user   - User and auth. domain.
     ."IO::File->new Failed ".  #                          namespace     - name of resource database.
     "while attempting tmpput\n";  #                          rid           - Resource id.
     }  #    $client             - socket open on the client.
   #
   # Returns:
   #      1  indicating the caller should not yet exit.
   # Side-effects:
   #   Writes a reply to the client.
   #   The reply is a string of the following shape:
   #   version=current&version:keys=k1:k2...&1:k1=v1&1:k2=v2...
   #    Where the 1 above represents version 1.
   #    this continues for all pairs of keys in all versions.
   #
   #
   #    
   #
   sub restore_handler {
       my ($cmd, $tail, $client) = @_;
   
       my $userinput = "$cmd:$tail"; # Only used for logging purposes.
   
       my ($cmd,$udom,$uname,$namespace,$rid) = split(/:/,$userinput);
       $namespace=~s/\//\_/g;
       $namespace=~s/\W//g;
       chomp($rid);
       my $proname=&propath($udom,$uname);
       my $qresult='';
       my %hash;
       if (tie(%hash,'GDBM_File',"$proname/$namespace.db",
       &GDBM_READER(),0640)) {
    my $version=$hash{"version:$rid"};
    $qresult.="version=$version&";
    my $scope;
    for ($scope=1;$scope<=$version;$scope++) {
       my $vkeys=$hash{"$scope:keys:$rid"};
       my @keys=split(/:/,$vkeys);
       my $key;
       $qresult.="$scope:keys=$vkeys&";
       foreach $key (@keys) {
    $qresult.="$scope:$key=".$hash{"$scope:$rid:$key"}."&";
       }                                  
    }
    if (untie(%hash)) {
       $qresult=~s/\&$//;
       &Reply( $client, "$qresult\n", $userinput);
  } else {   } else {
     Reply($client, "refused\n", $userinput);      &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
           "while attempting restore\n", $userinput);
  }   }
       } else {
 # ---------------------------------------------------------------------- tmpget   &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
     } elsif ($userinput =~ /^tmpget/) {   "while attempting restore\n", $userinput);
  if(isClient) {      }
     my ($cmd,$id)=split(/:/,$userinput);    
     chomp($id);      return 1;
     $id=~s/\W/\_/g;  
     my $store;  
     my $execdir=$perlvar{'lonDaemons'};  }
     if ($store=IO::File->new("$execdir/tmp/$id.tmp")) {  &register_handler("restore", \&restore_handler, 0,1,0);
  my $reply=<$store>;  
     print $client "$reply\n";  #
  close $store;  #   Add a chat message to to a discussion board.
     }  #
     else {  # Parameters:
  print $client "error: ".($!+0)  #    $cmd                - Request keyword.
     ."IO::File->new Failed ".  #    $tail               - Tail of the command. A colon separated list
     "while attempting tmpget\n";  #                          containing:
     }  #                          cdom    - Domain on which the chat board lives
  } else {  #                          cnum    - Identifier of the discussion group.
     Reply($client, "refused\n", $userinput);  #                          post    - Body of the posting.
       #   $client              - Socket open on the client.
   # Returns:
   #   1    - Indicating caller should keep on processing.
   #
   # Side-effects:
   #   writes a reply to the client.
   #
   #
   sub send_chat_handler {
       my ($cmd, $tail, $client) = @_;
   
       
       my $userinput = "$cmd:$tail";
   
       my ($cdom,$cnum,$newpost)=split(/\:/,$tail);
       &chat_add($cdom,$cnum,$newpost);
       &Reply($client, "ok\n", $userinput);
   
       return 1;
   }
   &register_handler("chatsend", \&send_chat_handler, 0, 1, 0);
   
   #
   #   Retrieve the set of chat messagss from a discussion board.
   #
   #  Parameters:
   #    $cmd             - Command keyword that initiated the request.
   #    $tail            - Remainder of the request after the command
   #                       keyword.  In this case a colon separated list of
   #                       chat domain    - Which discussion board.
   #                       chat id        - Discussion thread(?)
   #                       domain/user    - Authentication domain and username
   #                                        of the requesting person.
   #   $client           - Socket open on the client program.
   # Returns:
   #    1     - continue processing
   # Side effects:
   #    Response is written to the client.
   #
   sub retrieve_chat_handler {
       my ($cmd, $tail, $client) = @_;
   
   
       my $userinput = "$cmd:$tail";
   
       my ($cdom,$cnum,$udom,$uname)=split(/\:/,$tail);
       my $reply='';
       foreach (&get_chat($cdom,$cnum,$udom,$uname)) {
    $reply.=&escape($_).':';
       }
       $reply=~s/\:$//;
       &Reply($client, $reply."\n", $userinput);
   
   
       return 1;
   }
   &register_handler("chatretr", \&retrieve_chat_handler, 0, 1, 0);
   
   #
   #  Initiate a query of an sql database.  SQL query repsonses get put in
   #  a file for later retrieval.  This prevents sql query results from
   #  bottlenecking the system.  Note that with loncnew, perhaps this is
   #  less of an issue since multiple outstanding requests can be concurrently
   #  serviced.
   #
   #  Parameters:
   #     $cmd       - COmmand keyword that initiated the request.
   #     $tail      - Remainder of the command after the keyword.
   #                  For this function, this consists of a query and
   #                  3 arguments that are self-documentingly labelled
   #                  in the original arg1, arg2, arg3.
   #     $client    - Socket open on the client.
   # Return:
   #    1   - Indicating processing should continue.
   # Side-effects:
   #    a reply is written to $client.
   #
   sub send_query_handler {
       my ($cmd, $tail, $client) = @_;
   
   
       my $userinput = "$cmd:$tail";
   
       my ($query,$arg1,$arg2,$arg3)=split(/\:/,$tail);
       $query=~s/\n*$//g;
       &Reply($client, "". &sql_reply("$clientname\&$query".
    "\&$arg1"."\&$arg2"."\&$arg3")."\n",
     $userinput);
       
       return 1;
   }
   &register_handler("querysend", \&send_query_handler, 0, 1, 0);
   
   #
   #   Add a reply to an sql query.  SQL queries are done asyncrhonously.
   #   The query is submitted via a "querysend" transaction.
   #   There it is passed on to the lonsql daemon, queued and issued to
   #   mysql.
   #     This transaction is invoked when the sql transaction is complete
   #   it stores the query results in flie and indicates query completion.
   #   presumably local software then fetches this response... I'm guessing
   #   the sequence is: lonc does a querysend, we ask lonsql to do it.
   #   lonsql on completion of the query interacts with the lond of our
   #   client to do a query reply storing two files:
   #    - id     - The results of the query.
   #    - id.end - Indicating the transaction completed. 
   #    NOTE: id is a unique id assigned to the query and querysend time.
   # Parameters:
   #    $cmd        - Command keyword that initiated this request.
   #    $tail       - Remainder of the tail.  In this case that's a colon
   #                  separated list containing the query Id and the 
   #                  results of the query.
   #    $client     - Socket open on the client.
   # Return:
   #    1           - Indicating that we should continue processing.
   # Side effects:
   #    ok written to the client.
   #
   sub reply_query_handler {
       my ($cmd, $tail, $client) = @_;
   
   
       my $userinput = "$cmd:$tail";
   
       my ($cmd,$id,$reply)=split(/:/,$userinput); 
       my $store;
       my $execdir=$perlvar{'lonDaemons'};
       if ($store=IO::File->new(">$execdir/tmp/$id")) {
    $reply=~s/\&/\n/g;
    print $store $reply;
    close $store;
    my $store2=IO::File->new(">$execdir/tmp/$id.end");
    print $store2 "done\n";
    close $store2;
    &Reply($client, "ok\n", $userinput);
       } else {
    &Failure($client, "error: ".($!+0)
    ." IO::File->new Failed ".
    "while attempting queryreply\n", $userinput);
       }
    
   
       return 1;
   }
   &register_handler("queryreply", \&reply_query_handler, 0, 1, 0);
   
   #
   #  Process the courseidput request.  Not quite sure what this means
   #  at the system level sense.  It appears a gdbm file in the 
   #  /home/httpd/lonUsers/$domain/nohist_courseids is tied and
   #  a set of entries made in that database.
   #
   # Parameters:
   #   $cmd      - The command keyword that initiated this request.
   #   $tail     - Tail of the command.  In this case consists of a colon
   #               separated list contaning the domain to apply this to and
   #               an ampersand separated list of keyword=value pairs.
   #   $client   - Socket open on the client.
   # Returns:
   #   1    - indicating that processing should continue
   #
   # Side effects:
   #   reply is written to the client.
   #
   sub put_course_id_handler {
       my ($cmd, $tail, $client) = @_;
   
   
       my $userinput = "$cmd:$tail";
   
       my ($udom, $what) = split(/:/, $tail);
       chomp($what);
       my $now=time;
       my @pairs=split(/\&/,$what);
   
       my $hashref = &tie_domain_hash($udom, "nohist_courseids", &GDBM_WRCREAT());
       if ($hashref) {
    foreach my $pair (@pairs) {
       my ($key,$descr,$inst_code)=split(/=/,$pair);
       $hashref->{$key}=$descr.':'.$inst_code.':'.$now;
    }
    if (untie(%$hashref)) {
       &Reply( $client, "ok\n", $userinput);
    } else {
       &Failure($client, "error: ".($!+0)
        ." untie(GDBM) Failed ".
        "while attempting courseidput\n", $userinput);
  }   }
 # ---------------------------------------------------------------------- tmpdel      } else {
     } elsif ($userinput =~ /^tmpdel/) {   &Failure($client, "error: ".($!+0)
  if(isClient) {   ." tie(GDBM) Failed ".
     my ($cmd,$id)=split(/:/,$userinput);   "while attempting courseidput\n", $userinput);
     chomp($id);      }
     $id=~s/\W/\_/g;      
     my $execdir=$perlvar{'lonDaemons'};  
     if (unlink("$execdir/tmp/$id.tmp")) {      return 1;
  print $client "ok\n";  }
   &register_handler("courseidput", \&put_course_id_handler, 0, 1, 0);
   
   #  Retrieves the value of a course id resource keyword pattern
   #  defined since a starting date.  Both the starting date and the
   #  keyword pattern are optional.  If the starting date is not supplied it
   #  is treated as the beginning of time.  If the pattern is not found,
   #  it is treatred as "." matching everything.
   #
   #  Parameters:
   #     $cmd     - Command keyword that resulted in us being dispatched.
   #     $tail    - The remainder of the command that, in this case, consists
   #                of a colon separated list of:
   #                 domain   - The domain in which the course database is 
   #                            defined.
   #                 since    - Optional parameter describing the minimum
   #                            time of definition(?) of the resources that
   #                            will match the dump.
   #                 description - regular expression that is used to filter
   #                            the dump.  Only keywords matching this regexp
   #                            will be used.
   #     $client  - The socket open on the client.
   # Returns:
   #    1     - Continue processing.
   # Side Effects:
   #   a reply is written to $client.
   sub dump_course_id_handler {
       my ($cmd, $tail, $client) = @_;
   
       my $userinput = "$cmd:$tail";
   
       my ($udom,$since,$description) =split(/:/,$tail);
       if (defined($description)) {
    $description=&unescape($description);
       } else {
    $description='.';
       }
       unless (defined($since)) { $since=0; }
       my $qresult='';
       my $hashref = &tie_domain_hash($udom, "nohist_courseids", &GDBM_WRCREAT());
       if ($hashref) {
    while (my ($key,$value) = each(%$hashref)) {
       my ($descr,$lasttime,$inst_code);
       if ($value =~ m/^([^\:]*):([^\:]*):(\d+)$/) {
    ($descr,$inst_code,$lasttime)=($1,$2,$3);
     } else {      } else {
  print $client "error: ".($!+0)   ($descr,$lasttime) = split(/\:/,$value);
     ."Unlink tmp Failed ".  
     "while attempting tmpdel\n";  
     }      }
  } else {      if ($lasttime<$since) { next; }
     Reply($client, "refused\n", $userinput);      if ($description eq '.') {
        $qresult.=$key.'='.$descr.':'.$inst_code.'&';
  }  
 # ----------------------------------------- portfolio directory list (portls)  
     } elsif ($userinput =~ /^portls/) {  
  if(isClient) {  
     my ($cmd,$uname,$udom)=split(/:/,$userinput);  
     my $udir=propath($udom,$uname).'/userfiles/portfolio';  
     my $dirLine='';  
     my $dirContents='';  
     if (opendir(LSDIR,$udir.'/')){  
  while ($dirLine = readdir(LSDIR)){  
     $dirContents = $dirContents.$dirLine.'<br />';  
  }  
     } else {      } else {
  $dirContents = "No directory found\n";   my $unescapeVal = &unescape($descr);
     }   if (eval('$unescapeVal=~/\Q$description\E/i')) {
     print $client $dirContents."\n";      $qresult.=$key.'='.$descr.':'.$inst_code.'&';
  } else {  
     Reply($client, "refused\n", $userinput);  
  }  
 # -------------------------------------------------------------------------- ls  
     } elsif ($userinput =~ /^ls/) {  
  if(isClient) {  
     my $obs;  
     my $rights;  
     my ($cmd,$ulsdir)=split(/:/,$userinput);  
     my $ulsout='';  
     my $ulsfn;  
     if (-e $ulsdir) {  
  if(-d $ulsdir) {  
     if (opendir(LSDIR,$ulsdir)) {  
  while ($ulsfn=readdir(LSDIR)) {  
     undef $obs, $rights;   
     my @ulsstats=stat($ulsdir.'/'.$ulsfn);  
     #We do some obsolete checking here  
     if(-e $ulsdir.'/'.$ulsfn.".meta") {   
  open(FILE, $ulsdir.'/'.$ulsfn.".meta");  
  my @obsolete=<FILE>;  
  foreach my $obsolete (@obsolete) {  
     if($obsolete =~ m|(<obsolete>)(on)|) { $obs = 1; }   
     if($obsolete =~ m|(<copyright>)(default)|) { $rights = 1; }  
  }  
     }  
     $ulsout.=$ulsfn.'&'.join('&',@ulsstats);  
     if($obs eq '1') { $ulsout.="&1"; }  
     else { $ulsout.="&0"; }  
     if($rights eq '1') { $ulsout.="&1:"; }  
     else { $ulsout.="&0:"; }  
  }  
  closedir(LSDIR);  
     }  
  } else {  
     my @ulsstats=stat($ulsdir);  
     $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':';  
  }   }
     } else {  
  $ulsout='no_such_dir';  
     }      }
     if ($ulsout eq '') { $ulsout='empty'; }  
     print $client "$ulsout\n";  
  } else {  
     Reply($client, "refused\n", $userinput);  
       
  }   }
 # ----------------------------------------------------------------- setannounce   if (untie(%$hashref)) {
     } elsif ($userinput =~ /^setannounce/) {      chop($qresult);
  if (isClient) {      &Reply($client, "$qresult\n", $userinput);
     my ($cmd,$announcement)=split(/:/,$userinput);  
     chomp($announcement);  
     $announcement=&unescape($announcement);  
     if (my $store=IO::File->new('>'.$perlvar{'lonDocRoot'}.  
  '/announcement.txt')) {  
  print $store $announcement;  
  close $store;  
  print $client "ok\n";  
     } else {  
  print $client "error: ".($!+0)."\n";  
     }  
  } else {   } else {
     Reply($client, "refused\n", $userinput);      &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
           "while attempting courseiddump\n", $userinput);
  }   }
 # ------------------------------------------------------------------ Hanging up      } else {
     } elsif (($userinput =~ /^exit/) ||   &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
      ($userinput =~ /^init/)) { # no restrictions.   "while attempting courseiddump\n", $userinput);
  &logthis(      }
  "Client $clientip ($clientname) hanging up: $userinput");  
  print $client "bye\n";  
  $client->shutdown(2);        # shutdown the socket forcibly.      return 1;
  $client->close();  }
  return 0;  &register_handler("courseiddump", \&dump_course_id_handler, 0, 1, 0);
   
 # ---------------------------------- set current host/domain  #
     } elsif ($userinput =~ /^sethost:/) {  #  Puts an id to a domains id database. 
  if (isClient) {  #
     print $client &sethost($userinput)."\n";  #  Parameters:
  } else {  #   $cmd     - The command that triggered us.
     print $client "refused\n";  #   $tail    - Remainder of the request other than the command. This is a 
   #              colon separated list containing:
   #              $domain  - The domain for which we are writing the id.
   #              $pairs  - The id info to write... this is and & separated list
   #                        of keyword=value.
   #   $client  - Socket open on the client.
   #  Returns:
   #    1   - Continue processing.
   #  Side effects:
   #     reply is written to $client.
   #
   sub put_id_handler {
       my ($cmd,$tail,$client) = @_;
   
   
       my $userinput = "$cmd:$tail";
   
       my ($udom,$what)=split(/:/,$tail);
       chomp($what);
       my @pairs=split(/\&/,$what);
       my $hashref = &tie_domain_hash($udom, "ids", &GDBM_WRCREAT(),
      "P", $what);
       if ($hashref) {
    foreach my $pair (@pairs) {
       my ($key,$value)=split(/=/,$pair);
       $hashref->{$key}=$value;
  }   }
 #---------------------------------- request file (?) version.   if (untie(%$hashref)) {
     } elsif ($userinput =~/^version:/) {      &Reply($client, "ok\n", $userinput);
  if (isClient) {  
     print $client &version($userinput)."\n";  
  } else {   } else {
     print $client "refused\n";      &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
        "while attempting idput\n", $userinput);
  }   }
 #------------------------------- is auto-enrollment enabled?      } else {
     } elsif ($userinput =~/^autorun:/) {   &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
  if (isClient) {    "while attempting idput\n", $userinput);
     my ($cmd,$cdom) = split(/:/,$userinput);      }
     my $outcome = &localenroll::run($cdom);  
     print $client "$outcome\n";      return 1;
   }
   &register_handler("idput", \&put_id_handler, 0, 1, 0);
   
   #
   #  Retrieves a set of id values from the id database.
   #  Returns an & separated list of results, one for each requested id to the
   #  client.
   #
   # Parameters:
   #   $cmd       - Command keyword that caused us to be dispatched.
   #   $tail      - Tail of the command.  Consists of a colon separated:
   #               domain - the domain whose id table we dump
   #               ids      Consists of an & separated list of
   #                        id keywords whose values will be fetched.
   #                        nonexisting keywords will have an empty value.
   #   $client    - Socket open on the client.
   #
   # Returns:
   #    1 - indicating processing should continue.
   # Side effects:
   #   An & separated list of results is written to $client.
   #
   sub get_id_handler {
       my ($cmd, $tail, $client) = @_;
   
       
       my $userinput = "$client:$tail";
       
       my ($udom,$what)=split(/:/,$tail);
       chomp($what);
       my @queries=split(/\&/,$what);
       my $qresult='';
       my $hashref = &tie_domain_hash($udom, "ids", &GDBM_READER());
       if ($hashref) {
    for (my $i=0;$i<=$#queries;$i++) {
       $qresult.="$hashref->{$queries[$i]}&";
    }
    if (untie(%$hashref)) {
       $qresult=~s/\&$//;
       &Reply($client, "$qresult\n", $userinput);
  } else {   } else {
     print $client "0\n";      &Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ".
         "while attempting idget\n",$userinput);
  }   }
 #------------------------------- get official sections (for auto-enrollment).      } else {
     } elsif ($userinput =~/^autogetsections:/) {   &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
  if (isClient) {   "while attempting idget\n",$userinput);
     my ($cmd,$coursecode,$cdom)=split(/:/,$userinput);      }
     my @secs = &localenroll::get_sections($coursecode,$cdom);      
     my $seclist = &escape(join(':',@secs));      return 1;
     print $client "$seclist\n";  }
   &register_handler("idget", \&get_id_handler, 0, 1, 0);
   
   #
   #  Process the tmpput command I'm not sure what this does.. Seems to
   #  create a file in the lonDaemons/tmp directory of the form $id.tmp
   # where Id is the client's ip concatenated with a sequence number.
   # The file will contain some value that is passed in.  Is this e.g.
   # a login token?
   #
   # Parameters:
   #    $cmd     - The command that got us dispatched.
   #    $tail    - The remainder of the request following $cmd:
   #               In this case this will be the contents of the file.
   #    $client  - Socket connected to the client.
   # Returns:
   #    1 indicating processing can continue.
   # Side effects:
   #   A file is created in the local filesystem.
   #   A reply is sent to the client.
   sub tmp_put_handler {
       my ($cmd, $what, $client) = @_;
   
       my $userinput = "$cmd:$what"; # Reconstruct for logging.
   
   
       my $store;
       $tmpsnum++;
       my $id=$$.'_'.$clientip.'_'.$tmpsnum;
       $id=~s/\W/\_/g;
       $what=~s/\n//g;
       my $execdir=$perlvar{'lonDaemons'};
       if ($store=IO::File->new(">$execdir/tmp/$id.tmp")) {
    print $store $what;
    close $store;
    &Reply($client, "$id\n", $userinput);
       } else {
    &Failure( $client, "error: ".($!+0)."IO::File->new Failed ".
     "while attempting tmpput\n", $userinput);
       }
       return 1;
     
   }
   &register_handler("tmpput", \&tmp_put_handler, 0, 1, 0);
   
   #   Processes the tmpget command.  This command returns the contents
   #  of a temporary resource file(?) created via tmpput.
   #
   # Paramters:
   #    $cmd      - Command that got us dispatched.
   #    $id       - Tail of the command, contain the id of the resource
   #                we want to fetch.
   #    $client   - socket open on the client.
   # Return:
   #    1         - Inidcating processing can continue.
   # Side effects:
   #   A reply is sent to the client.
   #
   sub tmp_get_handler {
       my ($cmd, $id, $client) = @_;
   
       my $userinput = "$cmd:$id"; 
       
   
       $id=~s/\W/\_/g;
       my $store;
       my $execdir=$perlvar{'lonDaemons'};
       if ($store=IO::File->new("$execdir/tmp/$id.tmp")) {
    my $reply=<$store>;
    &Reply( $client, "$reply\n", $userinput);
    close $store;
       } else {
    &Failure( $client, "error: ".($!+0)."IO::File->new Failed ".
     "while attempting tmpget\n", $userinput);
       }
   
       return 1;
   }
   &register_handler("tmpget", \&tmp_get_handler, 0, 1, 0);
   
   #
   #  Process the tmpdel command.  This command deletes a temp resource
   #  created by the tmpput command.
   #
   # Parameters:
   #   $cmd      - Command that got us here.
   #   $id       - Id of the temporary resource created.
   #   $client   - socket open on the client process.
   #
   # Returns:
   #   1     - Indicating processing should continue.
   # Side Effects:
   #   A file is deleted
   #   A reply is sent to the client.
   sub tmp_del_handler {
       my ($cmd, $id, $client) = @_;
       
       my $userinput= "$cmd:$id";
       
       chomp($id);
       $id=~s/\W/\_/g;
       my $execdir=$perlvar{'lonDaemons'};
       if (unlink("$execdir/tmp/$id.tmp")) {
    &Reply($client, "ok\n", $userinput);
       } else {
    &Failure( $client, "error: ".($!+0)."Unlink tmp Failed ".
     "while attempting tmpdel\n", $userinput);
       }
       
       return 1;
   
   }
   &register_handler("tmpdel", \&tmp_del_handler, 0, 1, 0);
   
   #
   #   Processes the setannounce command.  This command
   #   creates a file named announce.txt in the top directory of
   #   the documentn root and sets its contents.  The announce.txt file is
   #   printed in its entirety at the LonCAPA login page.  Note:
   #   once the announcement.txt fileis created it cannot be deleted.
   #   However, setting the contents of the file to empty removes the
   #   announcement from the login page of loncapa so who cares.
   #
   # Parameters:
   #    $cmd          - The command that got us dispatched.
   #    $announcement - The text of the announcement.
   #    $client       - Socket open on the client process.
   # Retunrns:
   #   1             - Indicating request processing should continue
   # Side Effects:
   #   The file {DocRoot}/announcement.txt is created.
   #   A reply is sent to $client.
   #
   sub set_announce_handler {
       my ($cmd, $announcement, $client) = @_;
     
       my $userinput    = "$cmd:$announcement";
   
       chomp($announcement);
       $announcement=&unescape($announcement);
       if (my $store=IO::File->new('>'.$perlvar{'lonDocRoot'}.
    '/announcement.txt')) {
    print $store $announcement;
    close $store;
    &Reply($client, "ok\n", $userinput);
       } else {
    &Failure($client, "error: ".($!+0)."\n", $userinput);
       }
   
       return 1;
   }
   &register_handler("setannounce", \&set_announce_handler, 0, 1, 0);
   
   #
   #  Return the version of the daemon.  This can be used to determine
   #  the compatibility of cross version installations or, alternatively to
   #  simply know who's out of date and who isn't.  Note that the version
   #  is returned concatenated with the tail.
   # Parameters:
   #   $cmd        - the request that dispatched to us.
   #   $tail       - Tail of the request (client's version?).
   #   $client     - Socket open on the client.
   #Returns:
   #   1 - continue processing requests.
   # Side Effects:
   #   Replies with version to $client.
   sub get_version_handler {
       my ($cmd, $tail, $client) = @_;
   
       my $userinput  = $cmd.$tail;
       
       &Reply($client, &version($userinput)."\n", $userinput);
   
   
       return 1;
   }
   &register_handler("version", \&get_version_handler, 0, 1, 0);
   
   #  Set the current host and domain.  This is used to support
   #  multihomed systems.  Each IP of the system, or even separate daemons
   #  on the same IP can be treated as handling a separate lonCAPA virtual
   #  machine.  This command selects the virtual lonCAPA.  The client always
   #  knows the right one since it is lonc and it is selecting the domain/system
   #  from the hosts.tab file.
   # Parameters:
   #    $cmd      - Command that dispatched us.
   #    $tail     - Tail of the command (domain/host requested).
   #    $socket   - Socket open on the client.
   #
   # Returns:
   #     1   - Indicates the program should continue to process requests.
   # Side-effects:
   #     The default domain/system context is modified for this daemon.
   #     a reply is sent to the client.
   #
   sub set_virtual_host_handler {
       my ($cmd, $tail, $socket) = @_;
     
       my $userinput  ="$cmd:$tail";
   
       &Reply($client, &sethost($userinput)."\n", $userinput);
   
   
       return 1;
   }
   &register_handler("sethost", \&set_virtual_host_handler, 0, 1, 0);
   
   #  Process a request to exit:
   #   - "bye" is sent to the client.
   #   - The client socket is shutdown and closed.
   #   - We indicate to the caller that we should exit.
   # Formal Parameters:
   #   $cmd                - The command that got us here.
   #   $tail               - Tail of the command (empty).
   #   $client             - Socket open on the tail.
   # Returns:
   #   0      - Indicating the program should exit!!
   #
   sub exit_handler {
       my ($cmd, $tail, $client) = @_;
   
       my $userinput = "$cmd:$tail";
   
       &logthis("Client $clientip ($clientname) hanging up: $userinput");
       &Reply($client, "bye\n", $userinput);
       $client->shutdown(2);        # shutdown the socket forcibly.
       $client->close();
   
       return 0;
   }
   &register_handler("exit", \&exit_handler, 0,1,1);
   &register_handler("init", \&exit_handler, 0,1,1);
   &register_handler("quit", \&exit_handler, 0,1,1);
   
   #  Determine if auto-enrollment is enabled.
   #  Note that the original had what I believe to be a defect.
   #  The original returned 0 if the requestor was not a registerd client.
   #  It should return "refused".
   # Formal Parameters:
   #   $cmd       - The command that invoked us.
   #   $tail      - The tail of the command (Extra command parameters.
   #   $client    - The socket open on the client that issued the request.
   # Returns:
   #    1         - Indicating processing should continue.
   #
   sub enrollment_enabled_handler {
       my ($cmd, $tail, $client) = @_;
       my $userinput = $cmd.":".$tail; # For logging purposes.
   
       
       my $cdom = split(/:/, $tail);   # Domain we're asking about.
       my $outcome  = &localenroll::run($cdom);
       &Reply($client, "$outcome\n", $userinput);
   
       return 1;
   }
   &register_handler("autorun", \&enrollment_enabled_handler, 0, 1, 0);
   
   #   Get the official sections for which auto-enrollment is possible.
   #   Since the admin people won't know about 'unofficial sections' 
   #   we cannot auto-enroll on them.
   # Formal Parameters:
   #    $cmd     - The command request that got us dispatched here.
   #    $tail    - The remainder of the request.  In our case this
   #               will be split into:
   #               $coursecode   - The course name from the admin point of view.
   #               $cdom         - The course's domain(?).
   #    $client  - Socket open on the client.
   # Returns:
   #    1    - Indiciting processing should continue.
   #
   sub get_sections_handler {
       my ($cmd, $tail, $client) = @_;
       my $userinput = "$cmd:$tail";
   
       my ($coursecode, $cdom) = split(/:/, $tail);
       my @secs = &localenroll::get_sections($coursecode,$cdom);
       my $seclist = &escape(join(':',@secs));
   
       &Reply($client, "$seclist\n", $userinput);
       
   
       return 1;
   }
   &register_handler("autogetsections", \&get_sections_handler, 0, 1, 0);
   
   #   Validate the owner of a new course section.  
   #
   # Formal Parameters:
   #   $cmd      - Command that got us dispatched.
   #   $tail     - the remainder of the command.  For us this consists of a
   #               colon separated string containing:
   #                  $inst    - Course Id from the institutions point of view.
   #                  $owner   - Proposed owner of the course.
   #                  $cdom    - Domain of the course (from the institutions
   #                             point of view?)..
   #   $client   - Socket open on the client.
   #
   # Returns:
   #   1        - Processing should continue.
   #
   sub validate_course_owner_handler {
       my ($cmd, $tail, $client)  = @_;
       my $userinput = "$cmd:$tail";
       my ($inst_course_id, $owner, $cdom) = split(/:/, $tail);
   
       my $outcome = &localenroll::new_course($inst_course_id,$owner,$cdom);
       &Reply($client, "$outcome\n", $userinput);
   
   
   
       return 1;
   }
   &register_handler("autonewcourse", \&validate_course_owner_handler, 0, 1, 0);
   
   #
   #   Validate a course section in the official schedule of classes
   #   from the institutions point of view (part of autoenrollment).
   #
   # Formal Parameters:
   #   $cmd          - The command request that got us dispatched.
   #   $tail         - The tail of the command.  In this case,
   #                   this is a colon separated set of words that will be split
   #                   into:
   #                        $inst_course_id - The course/section id from the
   #                                          institutions point of view.
   #                        $cdom           - The domain from the institutions
   #                                          point of view.
   #   $client       - Socket open on the client.
   # Returns:
   #    1           - Indicating processing should continue.
   #
   sub validate_course_section_handler {
       my ($cmd, $tail, $client) = @_;
       my $userinput = "$cmd:$tail";
       my ($inst_course_id, $cdom) = split(/:/, $tail);
   
       my $outcome=&localenroll::validate_courseID($inst_course_id,$cdom);
       &Reply($client, "$outcome\n", $userinput);
   
   
       return 1;
   }
   &register_handler("autovalidatecourse", \&validate_course_section_handler, 0, 1, 0);
   
   #
   #   Create a password for a new auto-enrollment user.
   #   I think/guess, this password allows access to the institutions 
   #   AIS class list server/services.  Stuart can correct this comment
   #   when he finds out how wrong I am.
   #
   # Formal Parameters:
   #    $cmd     - The command request that got us dispatched.
   #    $tail    - The tail of the command.   In this case this is a colon separated
   #               set of words that will be split into:
   #               $authparam - An authentication parameter (username??).
   #               $cdom      - The domain of the course from the institution's
   #                            point of view.
   #    $client  - The socket open on the client.
   # Returns:
   #    1 - continue processing.
   #
   sub create_auto_enroll_password_handler {
       my ($cmd, $tail, $client) = @_;
       my $userinput = "$cmd:$tail";
   
       my ($authparam, $cdom) = split(/:/, $userinput);
   
       my ($create_passwd,$authchk);
       ($authparam,
        $create_passwd,
        $authchk) = &localenroll::create_password($authparam,$cdom);
   
       &Reply($client, &escape($authparam.':'.$create_passwd.':'.$authchk)."\n",
      $userinput);
   
   
       return 1;
   }
   &register_handler("autocreatepassword", \&create_auto_enroll_password_handler, 
     0, 1, 0);
   
   #   Retrieve and remove temporary files created by/during autoenrollment.
   #
   # Formal Parameters:
   #    $cmd      - The command that got us dispatched.
   #    $tail     - The tail of the command.  In our case this is a colon 
   #                separated list that will be split into:
   #                $filename - The name of the file to remove.
   #                            The filename is given as a path relative to
   #                            the LonCAPA temp file directory.
   #    $client   - Socket open on the client.
   #
   # Returns:
   #   1     - Continue processing.
   sub retrieve_auto_file_handler {
       my ($cmd, $tail, $client)    = @_;
       my $userinput                = "cmd:$tail";
   
       my ($filename)   = split(/:/, $tail);
   
       my $source = $perlvar{'lonDaemons'}.'/tmp/'.$filename;
       if ( (-e $source) && ($filename ne '') ) {
    my $reply = '';
    if (open(my $fh,$source)) {
       while (<$fh>) {
    chomp($_);
    $_ =~ s/^\s+//g;
    $_ =~ s/\s+$//g;
    $reply .= $_;
       }
       close($fh);
       &Reply($client, &escape($reply)."\n", $userinput);
   
   #   Does this have to be uncommented??!?  (RF).
   #
   #                                unlink($source);
  } else {   } else {
     print $client "refused\n";      &Failure($client, "error\n", $userinput);
  }   }
 #----------------------- validate owner of new course section (for auto-enrollment).      } else {
     } elsif ($userinput =~/^autonewcourse:/) {   &Failure($client, "error\n", $userinput);
  if (isClient) {      }
     my ($cmd,$inst_course_id,$owner,$cdom)=split(/:/,$userinput);      
     my $outcome = &localenroll::new_course($inst_course_id,$owner,$cdom);  
     print $client "$outcome\n";      return 1;
  } else {  }
     print $client "refused\n";  &register_handler("autoretrieve", \&retrieve_auto_file_handler, 0,1,0);
   
   #
   #   Read and retrieve institutional code format (for support form).
   # Formal Parameters:
   #    $cmd        - Command that dispatched us.
   #    $tail       - Tail of the command.  In this case it conatins 
   #                  the course domain and the coursename.
   #    $client     - Socket open on the client.
   # Returns:
   #    1     - Continue processing.
   #
   sub get_institutional_code_format_handler {
       my ($cmd, $tail, $client)   = @_;
       my $userinput               = "$cmd:$tail";
   
       my $reply;
       my($cdom,$course) = split(/:/,$tail);
       my @pairs = split/\&/,$course;
       my %instcodes = ();
       my %codes = ();
       my @codetitles = ();
       my %cat_titles = ();
       my %cat_order = ();
       foreach (@pairs) {
    my ($key,$value) = split/=/,$_;
    $instcodes{&unescape($key)} = &unescape($value);
       }
       my $formatreply = &localenroll::instcode_format($cdom,
       \%instcodes,
       \%codes,
       \@codetitles,
       \%cat_titles,
       \%cat_order);
       if ($formatreply eq 'ok') {
    my $codes_str = &hash2str(%codes);
    my $codetitles_str = &array2str(@codetitles);
    my $cat_titles_str = &hash2str(%cat_titles);
    my $cat_order_str = &hash2str(%cat_order);
    &Reply($client,
          $codes_str.':'.$codetitles_str.':'.$cat_titles_str.':'
          .$cat_order_str."\n",
          $userinput);
       } else {
    # this else branch added by RF since if not ok, lonc will
    # hang waiting on reply until timeout.
    #
    &Reply($client, "format_error\n", $userinput);
       }
       
       return 1;
   }
   
   &register_handler("autoinstcodeformat", \&get_institutional_code_format_handler,
     0,1,0);
   
   #
   #
   #
   #
   #
   #---------------------------------------------------------------
   #
   #   Getting, decoding and dispatching requests:
   #
   #
   #   Get a Request:
   #   Gets a Request message from the client.  The transaction
   #   is defined as a 'line' of text.  We remove the new line
   #   from the text line.  
   #
   sub get_request {
       my $input = <$client>;
       chomp($input);
   
       &Debug("get_request: Request = $input\n");
   
       &status('Processing '.$clientname.':'.$input);
   
       return $input;
   }
   #---------------------------------------------------------------
   #
   #  Process a request.  This sub should shrink as each action
   #  gets farmed out into a separat sub that is registered 
   #  with the dispatch hash.  
   #
   # Parameters:
   #    user_input   - The request received from the client (lonc).
   # Returns:
   #    true to keep processing, false if caller should exit.
   #
   sub process_request {
       my ($userinput) = @_;      # Easier for now to break style than to
                                   # fix all the userinput -> user_input.
       my $wasenc    = 0; # True if request was encrypted.
   # ------------------------------------------------------------ See if encrypted
       if ($userinput =~ /^enc/) {
    $userinput = decipher($userinput);
    $wasenc=1;
    if(!$userinput) { # Cipher not defined.
       &Failure($client, "error: Encrypted data without negotated key\n");
       return 0;
  }   }
 #-------------- validate course section in schedule of classes (for auto-enrollment).      }
     } elsif ($userinput =~/^autovalidatecourse:/) {      Debug("process_request: $userinput\n");
  if (isClient) {      
     my ($cmd,$inst_course_id,$cdom)=split(/:/,$userinput);      #  
     my $outcome=&localenroll::validate_courseID($inst_course_id,$cdom);      #   The 'correct way' to add a command to lond is now to
     print $client "$outcome\n";      #   write a sub to execute it and Add it to the command dispatch
  } else {      #   hash via a call to register_handler..  The comments to that
     print $client "refused\n";      #   sub should give you enough to go on to show how to do this
       #   along with the examples that are building up as this code
       #   is getting refactored.   Until all branches of the
       #   if/elseif monster below have been factored out into
       #   separate procesor subs, if the dispatch hash is missing
       #   the command keyword, we will fall through to the remainder
       #   of the if/else chain below in order to keep this thing in 
       #   working order throughout the transmogrification.
   
       my ($command, $tail) = split(/:/, $userinput, 2);
       chomp($command);
       chomp($tail);
       $tail =~ s/(\r)//; # This helps people debugging with e.g. telnet.
       $command =~ s/(\r)//; # And this too for parameterless commands.
       if(!$tail) {
    $tail =""; # defined but blank.
       }
   
       &Debug("Command received: $command, encoded = $wasenc");
   
       if(defined $Dispatcher{$command}) {
   
    my $dispatch_info = $Dispatcher{$command};
    my $handler       = $$dispatch_info[0];
    my $need_encode   = $$dispatch_info[1];
    my $client_types  = $$dispatch_info[2];
    Debug("Matched dispatch hash: mustencode: $need_encode "
         ."ClientType $client_types");
         
    #  Validate the request:
         
    my $ok = 1;
    my $requesterprivs = 0;
    if(&isClient()) {
       $requesterprivs |= $CLIENT_OK;
  }   }
 #--------------------------- create password for new user (for auto-enrollment).   if(&isManager()) {
     } elsif ($userinput =~/^autocreatepassword:/) {      $requesterprivs |= $MANAGER_OK;
  if (isClient) {  
     my ($cmd,$authparam,$cdom)=split(/:/,$userinput);  
     my ($create_passwd,$authchk);  
     ($authparam,$create_passwd,$authchk) = &localenroll::create_password($authparam,$cdom);  
     print $client &escape($authparam.':'.$create_passwd.':'.$authchk)."\n";  
  } else {  
     print $client "refused\n";  
  }   }
 #---------------------------  read and remove temporary files (for auto-enrollment).   if($need_encode && (!$wasenc)) {
     } elsif ($userinput =~/^autoretrieve:/) {      Debug("Must encode but wasn't: $need_encode $wasenc");
  if (isClient) {      $ok = 0;
     my ($cmd,$filename) = split(/:/,$userinput);  
     my $source = $perlvar{'lonDaemons'}.'/tmp/'.$filename;  
     if ( (-e $source) && ($filename ne '') ) {  
  my $reply = '';  
  if (open(my $fh,$source)) {  
     while (<$fh>) {  
  chomp($_);  
  $_ =~ s/^\s+//g;  
  $_ =~ s/\s+$//g;  
  $reply .= $_;  
     }  
     close($fh);  
     print $client &escape($reply)."\n";  
 #                                unlink($source);  
  } else {  
     print $client "error\n";  
  }  
     } else {  
  print $client "error\n";  
     }  
  } else {  
     print $client "refused\n";  
  }   }
 #---------------------  read and retrieve institutional code format (for support form).   if(($client_types & $requesterprivs) == 0) {
     } elsif ($userinput =~/^autoinstcodeformat:/) {      Debug("Client not privileged to do this operation");
  if (isClient) {      $ok = 0;
     my $reply;   }
     my($cmd,$cdom,$course) = split(/:/,$userinput);  
     my @pairs = split/\&/,$course;   if($ok) {
     my %instcodes = ();      Debug("Dispatching to handler $command $tail");
     my %codes = ();      my $keep_going = &$handler($command, $tail, $client);
     my @codetitles = ();      return $keep_going;
     my %cat_titles = ();  
     my %cat_order = ();  
     foreach (@pairs) {  
  my ($key,$value) = split/=/,$_;  
  $instcodes{&unescape($key)} = &unescape($value);  
     }  
     my $formatreply = &localenroll::instcode_format($cdom,\%instcodes,\%codes,\@codetitles,\%cat_titles,\%cat_order);  
     if ($formatreply eq 'ok') {  
  my $codes_str = &hash2str(%codes);  
  my $codetitles_str = &array2str(@codetitles);  
  my $cat_titles_str = &hash2str(%cat_titles);  
  my $cat_order_str = &hash2str(%cat_order);  
  print $client $codes_str.':'.$codetitles_str.':'.$cat_titles_str.':'.$cat_order_str."\n";  
     }  
  } else {   } else {
     print $client "refused\n";      Debug("Refusing to dispatch because client did not match requirements");
       Failure($client, "refused\n", $userinput);
       return 1;
  }   }
 # ------------------------------------------------------------- unknown command  
       }    
     } else {  
  # unknown command      print $client "unknown_cmd\n";
  print $client "unknown_cmd\n";  
     }  
 # -------------------------------------------------------------------- complete  # -------------------------------------------------------------------- complete
     Debug("process_request - returning 1");      Debug("process_request - returning 1");
     return 1;      return 1;
Line 2997  sub register_handler { Line 4025  sub register_handler {
         
     $Dispatcher{$request_name} = \@entry;      $Dispatcher{$request_name} = \@entry;
         
      
 }  }
   
   
Line 3044  sub catchexception { Line 4071  sub catchexception {
     $server->close();      $server->close();
     die($error);      die($error);
 }  }
   
 sub timeout {  sub timeout {
     &status("Handling Timeout");      &status("Handling Timeout");
     &logthis("<font color='red'>CRITICAL: TIME OUT ".$$."</font>");      &logthis("<font color='red'>CRITICAL: TIME OUT ".$$."</font>");
Line 3052  sub timeout { Line 4078  sub timeout {
 }  }
 # -------------------------------- Set signal handlers to record abnormal exits  # -------------------------------- Set signal handlers to record abnormal exits
   
   
 $SIG{'QUIT'}=\&catchexception;  $SIG{'QUIT'}=\&catchexception;
 $SIG{__DIE__}=\&catchexception;  $SIG{__DIE__}=\&catchexception;
   
Line 3468  sub reply { Line 4495  sub reply {
   
 # -------------------------------------------------------------- Talk to lonsql  # -------------------------------------------------------------- Talk to lonsql
   
 sub sqlreply {  sub sql_reply {
     my ($cmd)=@_;      my ($cmd)=@_;
     my $answer=subsqlreply($cmd);      my $answer=&sub_sql_reply($cmd);
     if ($answer eq 'con_lost') { $answer=subsqlreply($cmd); }      if ($answer eq 'con_lost') { $answer=&sub_sql_reply($cmd); }
     return $answer;      return $answer;
 }  }
   
 sub subsqlreply {  sub sub_sql_reply {
     my ($cmd)=@_;      my ($cmd)=@_;
     my $unixsock="mysqlsock";      my $unixsock="mysqlsock";
     my $peerfile="$perlvar{'lonSockDir'}/$unixsock";      my $peerfile="$perlvar{'lonSockDir'}/$unixsock";
Line 3681  sub make_new_child { Line 4708  sub make_new_child {
  $inittype = ""; # This forces insecure attempt.   $inittype = ""; # This forces insecure attempt.
  &logthis("<font color=\"blue\"> Certificates not "   &logthis("<font color=\"blue\"> Certificates not "
  ."installed -- trying insecure auth</font>");   ."installed -- trying insecure auth</font>");
     }      } else { # SSL certificates are in place so
     else { # SSL certificates are in place so  
     } # Leave the inittype alone.      } # Leave the inittype alone.
  }   }
   
Line 3792  sub make_new_child { Line 4818  sub make_new_child {
     exit;      exit;
           
 }  }
   #
   #   Determine if a user is an author for the indicated domain.
   #
   # Parameters:
   #    domain          - domain to check in .
   #    user            - Name of user to check.
   #
   # Return:
   #     1             - User is an author for domain.
   #     0             - User is not an author for domain.
   sub is_author {
       my ($domain, $user) = @_;
   
       &Debug("is_author: $user @ $domain");
   
       my $hashref = &tie_user_hash($domain, $user, "roles",
    &GDBM_READER());
   
       #  Author role should show up as a key /domain/_au
   
       my $key   = "/$domain/_au";
       my $value = $hashref->{$key};
   
       if(defined($value)) {
    &Debug("$user @ $domain is an author");
       }
   
       return defined($value);
   }
 #  #
 #   Checks to see if the input roleput request was to set  #   Checks to see if the input roleput request was to set
 # an author role.  If so, invokes the lchtmldir script to set  # an author role.  If so, invokes the lchtmldir script to set
Line 3805  sub make_new_child { Line 4858  sub make_new_child {
 #    user      - Name of the user for which the role is being put.  #    user      - Name of the user for which the role is being put.
 #    authtype  - The authentication type associated with the user.  #    authtype  - The authentication type associated with the user.
 #  #
 sub ManagePermissions  sub manage_permissions
 {  {
   
   
     my ($request, $domain, $user, $authtype) = @_;      my ($request, $domain, $user, $authtype) = @_;
   
       &Debug("manage_permissions: $request $domain $user $authtype");
   
     # See if the request is of the form /$domain/_au      # See if the request is of the form /$domain/_au
     if($request =~ /^(\/$domain\/_au)$/) { # It's an author rolesput...      if($request =~ /^(\/$domain\/_au)$/) { # It's an author rolesput...
  my $execdir = $perlvar{'lonDaemons'};   my $execdir = $perlvar{'lonDaemons'};
  my $userhome= "/home/$user" ;   my $userhome= "/home/$user" ;
  &logthis("system $execdir/lchtmldir $userhome $user $authtype");   &logthis("system $execdir/lchtmldir $userhome $user $authtype");
    &Debug("Setting homedir permissions for $userhome");
  system("$execdir/lchtmldir $userhome $user $authtype");   system("$execdir/lchtmldir $userhome $user $authtype");
     }      }
 }  }
   
   
   #
   #  Return the full path of a user password file, whether it exists or not.
   # Parameters:
   #   domain     - Domain in which the password file lives.
   #   user       - name of the user.
   # Returns:
   #    Full passwd path:
   #
   sub password_path {
       my ($domain, $user) = @_;
   
   
       my $path   = &propath($domain, $user);
       $path  .= "/passwd";
   
       return $path;
   }
   
   #   Password Filename
   #   Returns the path to a passwd file given domain and user... only if
   #  it exists.
   # Parameters:
   #   domain    - Domain in which to search.
   #   user      - username.
   # Returns:
   #   - If the password file exists returns its path.
   #   - If the password file does not exist, returns undefined.
   #
   sub password_filename {
       my ($domain, $user) = @_;
   
       Debug ("PasswordFilename called: dom = $domain user = $user");
   
       my $path  = &password_path($domain, $user);
       Debug("PasswordFilename got path: $path");
       if(-e $path) {
    return $path;
       } else {
    return undef;
       }
   }
   
   #
   #   Rewrite the contents of the user's passwd file.
   #  Parameters:
   #    domain    - domain of the user.
   #    name      - User's name.
   #    contents  - New contents of the file.
   # Returns:
   #   0    - Failed.
   #   1    - Success.
   #
   sub rewrite_password_file {
       my ($domain, $user, $contents) = @_;
   
       my $file = &password_filename($domain, $user);
       if (defined $file) {
    my $pf = IO::File->new(">$file");
    if($pf) {
       print $pf "$contents\n";
       return 1;
    } else {
       return 0;
    }
       } else {
    return 0;
       }
   
   }
   
 #  #
 #   GetAuthType - Determines the authorization type of a user in a domain.  #   get_auth_type - Determines the authorization type of a user in a domain.
   
 #     Returns the authorization type or nouser if there is no such user.  #     Returns the authorization type or nouser if there is no such user.
 #  #
 sub GetAuthType   sub get_auth_type 
 {  {
   
     my ($domain, $user)  = @_;      my ($domain, $user)  = @_;
   
     Debug("GetAuthType( $domain, $user ) \n");      Debug("get_auth_type( $domain, $user ) \n");
     my $proname    = &propath($domain, $user);       my $proname    = &propath($domain, $user); 
     my $passwdfile = "$proname/passwd";      my $passwdfile = "$proname/passwd";
     if( -e $passwdfile ) {      if( -e $passwdfile ) {
Line 3838  sub GetAuthType Line 4967  sub GetAuthType
  Debug("Password info = $realpassword\n");   Debug("Password info = $realpassword\n");
  my ($authtype, $contentpwd) = split(/:/, $realpassword);   my ($authtype, $contentpwd) = split(/:/, $realpassword);
  Debug("Authtype = $authtype, content = $contentpwd\n");   Debug("Authtype = $authtype, content = $contentpwd\n");
  my $availinfo = '';   return "$authtype:$contentpwd";     
  if($authtype eq 'krb4' or $authtype eq 'krb5') {      } else {
     $availinfo = $contentpwd;  
  }  
   
  return "$authtype:$availinfo";  
     }  
     else {  
  Debug("Returning nouser");   Debug("Returning nouser");
  return "nouser";   return "nouser";
     }      }
Line 3877  sub validate_user { Line 5000  sub validate_user {
     # At the end of this function. I'll ensure that it's not still that      # At the end of this function. I'll ensure that it's not still that
     # value so we don't just wind up returning some accidental value      # value so we don't just wind up returning some accidental value
     # as a result of executing an unforseen code path that      # as a result of executing an unforseen code path that
     # did not set $validated.      # did not set $validated.  At the end of valid execution paths,
       # validated shoule be 1 for success or 0 for failuer.
   
     my $validated = -3.14159;      my $validated = -3.14159;
   
Line 3885  sub validate_user { Line 5009  sub validate_user {
     #  the user has been assigned.  If the authentication type is      #  the user has been assigned.  If the authentication type is
     #  "nouser", the user does not exist so we will return 0.      #  "nouser", the user does not exist so we will return 0.
   
     my $contents = &GetAuthType($domain, $user);      my $contents = &get_auth_type($domain, $user);
     my ($howpwd, $contentpwd) = split(/:/, $contents);      my ($howpwd, $contentpwd) = split(/:/, $contents);
   
     my $null = pack("C",0); # Used by kerberos auth types.      my $null = pack("C",0); # Used by kerberos auth types.
Line 3925  sub validate_user { Line 5049  sub validate_user {
    $password);     $password);
  if(!$k4error) {   if(!$k4error) {
     $validated = 1;      $validated = 1;
  }   } else {
  else {  
     $validated = 0;      $validated = 0;
     &logthis('krb4: '.$user.', '.$contentpwd.', '.      &logthis('krb4: '.$user.', '.$contentpwd.', '.
      &Authen::Krb4::get_err_txt($Authen::Krb4::error));       &Authen::Krb4::get_err_txt($Authen::Krb4::error));
  }   }
     }      } else {
     else {  
  $validated = 0; # Password has a match with null.   $validated = 0; # Password has a match with null.
     }      }
  }   } elsif ($howpwd eq "krb5") { # User is in kerberos 5 auth. domain.
  elsif ($howpwd eq "krb5") { # User is in kerberos 5 auth. domain.  
     if(!($password =~ /$null/)) { # Null password not allowed.      if(!($password =~ /$null/)) { # Null password not allowed.
  my $krbclient = &Authen::Krb5::parse_name($user.'@'   my $krbclient = &Authen::Krb5::parse_name($user.'@'
   .$contentpwd);    .$contentpwd);
Line 3949  sub validate_user { Line 5070  sub validate_user {
  $password,   $password,
  $credentials);   $credentials);
  $validated = ($krbreturn == 1);   $validated = ($krbreturn == 1);
     }      } else {
     else {  
  $validated = 0;   $validated = 0;
     }      }
  }   } elsif ($howpwd eq "localauth") { 
  elsif ($howpwd eq "localauth") {   
     #  Authenticate via installation specific authentcation method:      #  Authenticate via installation specific authentcation method:
     $validated = &localauth::localauth($user,       $validated = &localauth::localauth($user, 
        $password,          $password, 
        $contentpwd);         $contentpwd);
  }   } else { # Unrecognized auth is also bad.
  else { # Unrecognized auth is also bad.  
     $validated = 0;      $validated = 0;
  }   }
     } else {      } else {
Line 3971  sub validate_user { Line 5089  sub validate_user {
     #      #
   
     unless ($validated != -3.14159) {      unless ($validated != -3.14159) {
  die "ValidateUser - failed to set the value of validated";   #  I >really really< want to know if this happens.
    #  since it indicates that user authentication is badly
    #  broken in some code path.
           #
    die "ValidateUser - failed to set the value of validated $domain, $user $password";
     }      }
     return $validated;      return $validated;
 }  }
Line 3997  sub addline { Line 5119  sub addline {
     return $found;      return $found;
 }  }
   
 sub getchat {  sub get_chat {
     my ($cdom,$cname,$udom,$uname)=@_;      my ($cdom,$cname,$udom,$uname)=@_;
     my %hash;      my %hash;
     my $proname=&propath($cdom,$cname);      my $proname=&propath($cdom,$cname);
Line 4022  sub getchat { Line 5144  sub getchat {
     return (@participants,@entries);      return (@participants,@entries);
 }  }
   
 sub chatadd {  sub chat_add {
     my ($cdom,$cname,$newchat)=@_;      my ($cdom,$cname,$newchat)=@_;
     my %hash;      my %hash;
     my $proname=&propath($cdom,$cname);      my $proname=&propath($cdom,$cname);
Line 4194  sub make_passwd_file { Line 5316  sub make_passwd_file {
     if ($umode eq 'krb4' or $umode eq 'krb5') {      if ($umode eq 'krb4' or $umode eq 'krb5') {
  {   {
     my $pf = IO::File->new(">$passfilename");      my $pf = IO::File->new(">$passfilename");
     print $pf "$umode:$npass\n";      if ($pf) {
    print $pf "$umode:$npass\n";
       } else {
    $result = "pass_file_failed_error";
       }
  }   }
     } elsif ($umode eq 'internal') {      } elsif ($umode eq 'internal') {
  my $salt=time;   my $salt=time;
Line 4203  sub make_passwd_file { Line 5329  sub make_passwd_file {
  {   {
     &Debug("Creating internal auth");      &Debug("Creating internal auth");
     my $pf = IO::File->new(">$passfilename");      my $pf = IO::File->new(">$passfilename");
     print $pf "internal:$ncpass\n";       if($pf) {
    print $pf "internal:$ncpass\n"; 
       } else {
    $result = "pass_file_failed_error";
       }
  }   }
     } elsif ($umode eq 'localauth') {      } elsif ($umode eq 'localauth') {
  {   {
     my $pf = IO::File->new(">$passfilename");      my $pf = IO::File->new(">$passfilename");
     print $pf "localauth:$npass\n";      if($pf) {
    print $pf "localauth:$npass\n";
       } else {
    $result = "pass_file_failed_error";
       }
  }   }
     } elsif ($umode eq 'unix') {      } elsif ($umode eq 'unix') {
  {   {
Line 4222  sub make_passwd_file { Line 5356  sub make_passwd_file {
  return "no_priv_account_error\n";   return "no_priv_account_error\n";
     }      }
   
     my $execpath="$perlvar{'lonDaemons'}/"."lcuseradd";      my $execpath       ="$perlvar{'lonDaemons'}/"."lcuseradd";
   
       my $lc_error_file  = $execdir."/tmp/lcuseradd".$$.".status";
     {      {
  &Debug("Executing external: ".$execpath);   &Debug("Executing external: ".$execpath);
  &Debug("user  = ".$uname.", Password =". $npass);   &Debug("user  = ".$uname.", Password =". $npass);
Line 4230  sub make_passwd_file { Line 5366  sub make_passwd_file {
  print $se "$uname\n";   print $se "$uname\n";
  print $se "$npass\n";   print $se "$npass\n";
  print $se "$npass\n";   print $se "$npass\n";
    print $se "$lc_error_file\n"; # Status -> unique file.
     }      }
     my $useraddok = $?;      my $error = IO::File->new("< $lc_error_file");
       my $useraddok = <$error>;
       $error->close;
       unlink($lc_error_file);
   
       chomp $useraddok;
   
     if($useraddok > 0) {      if($useraddok > 0) {
  &logthis("Failed lcuseradd: ".&lcuseraddstrerror($useraddok));   my $error_text = &lcuseraddstrerror($useraddok);
    &logthis("Failed lcuseradd: $error_text");
    $result = "lcuseradd_failed:$error_text\n";
       }  else {
    my $pf = IO::File->new(">$passfilename");
    if($pf) {
       print $pf "unix:\n";
    } else {
       $result = "pass_file_failed_error";
    }
     }      }
     my $pf = IO::File->new(">$passfilename");  
     print $pf "unix:\n";  
  }   }
     } elsif ($umode eq 'none') {      } elsif ($umode eq 'none') {
  {   {
     my $pf = IO::File->new(">$passfilename");      my $pf = IO::File->new("> $passfilename");
     print $pf "none:\n";      if($pf) {
    print $pf "none:\n";
       } else {
    $result = "pass_file_failed_error";
       }
  }   }
     } else {      } else {
  $result="auth_mode_error\n";   $result="auth_mode_error\n";
Line 4569  Place in B<logs/lond.log> Line 5723  Place in B<logs/lond.log>
   
 stores hash in namespace  stores hash in namespace
   
 =item rolesput  =item rolesputy
   
 put a role into a user's environment  put a role into a user's environment
   
Removed from v.1.221  
changed lines
  Added in v.1.263

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>