loncom/lond - diff

Return to lond CVS log

Up to [LON-CAPA] / loncom

Diff for /loncom/lond between versions 1.257 and 1.264

version 1.257, 2004/09/14 20:15:22	version 1.264, 2004/10/26 14:55:49
Line 1130 sub read_profile {	Line 1130 sub read_profile {
# 0 - Program should exit.	# 0 - Program should exit.
# Side effects:	# Side effects:
# Reply information is sent to the client.	# Reply information is sent to the client.

sub ping_handler {	sub ping_handler {
my ($cmd, $tail, $client) = @_;	my ($cmd, $tail, $client) = @_;
Debug("$cmd $tail $client .. $currenthostid:");	Debug("$cmd $tail $client .. $currenthostid:");
Line 1158 sub ping_handler {	Line 1157 sub ping_handler {
# 0 - Program should exit.	# 0 - Program should exit.
# Side effects:	# Side effects:
# Reply information is sent to the client.	# Reply information is sent to the client.

sub pong_handler {	sub pong_handler {
my ($cmd, $tail, $replyfd) = @_;	my ($cmd, $tail, $replyfd) = @_;

Line 1213 sub establish_key_handler {	Line 1211 sub establish_key_handler {
}	}
&register_handler("ekey", \&establish_key_handler, 0, 1,1);	&register_handler("ekey", \&establish_key_handler, 0, 1,1);


# Handler for the load command. Returns the current system load average	# Handler for the load command. Returns the current system load average
# to the requestor.	# to the requestor.
#	#
Line 1248 sub load_handler {	Line 1245 sub load_handler {

return 1;	return 1;
}	}
register_handler("load", \&load_handler, 0, 1, 0);	&register_handler("load", \&load_handler, 0, 1, 0);

#	#
# Process the userload request. This sub returns to the client the current	# Process the userload request. This sub returns to the client the current
Line 1278 sub user_load_handler {	Line 1275 sub user_load_handler {

return 1;	return 1;
}	}
register_handler("userload", \&user_load_handler, 0, 1, 0);	&register_handler("userload", \&user_load_handler, 0, 1, 0);

# Process a request for the authorization type of a user:	# Process a request for the authorization type of a user:
# (userauth).	# (userauth).
Line 1335 sub user_authorization_type {	Line 1332 sub user_authorization_type {
# 0 - Program should exit	# 0 - Program should exit
# Implicit Output:	# Implicit Output:
# a reply is written to the client.	# a reply is written to the client.

sub push_file_handler {	sub push_file_handler {
my ($cmd, $tail, $client) = @_;	my ($cmd, $tail, $client) = @_;

Line 1378 sub push_file_handler {	Line 1374 sub push_file_handler {
# Side Effects:	# Side Effects:
# The reply is written to $client.	# The reply is written to $client.
#	#

sub du_handler {	sub du_handler {
my ($cmd, $ududir, $client) = @_;	my ($cmd, $ududir, $client) = @_;
my ($ududir) = split(/:/,$ududir); # Make 'telnet' testing easier.	my ($ududir) = split(/:/,$ududir); # Make 'telnet' testing easier.
Line 1412 sub du_handler {	Line 1407 sub du_handler {
}	}
&register_handler("du", \&du_handler, 0, 1, 0);	&register_handler("du", \&du_handler, 0, 1, 0);


#	#
# ls - list the contents of a directory. For each file in the	# ls - list the contents of a directory. For each file in the
# selected directory the filename followed by the full output of	# selected directory the filename followed by the full output of
Line 1476 sub ls_handler {	Line 1470 sub ls_handler {
}	}
&register_handler("ls", \&ls_handler, 0, 1, 0);	&register_handler("ls", \&ls_handler, 0, 1, 0);




# Process a reinit request. Reinit requests that either	# Process a reinit request. Reinit requests that either
# lonc or lond be reinitialized so that an updated	# lonc or lond be reinitialized so that an updated
# host.tab or domain.tab can be processed.	# host.tab or domain.tab can be processed.
Line 1508 sub reinit_process_handler {	Line 1499 sub reinit_process_handler {
}	}
return 1;	return 1;
}	}

&register_handler("reinit", \&reinit_process_handler, 1, 0, 1);	&register_handler("reinit", \&reinit_process_handler, 1, 0, 1);

# Process the editing script for a table edit operation.	# Process the editing script for a table edit operation.
Line 1550 sub edit_table_handler {	Line 1540 sub edit_table_handler {
}	}
return 1;	return 1;
}	}
register_handler("edit", \&edit_table_handler, 1, 0, 1);	&register_handler("edit", \&edit_table_handler, 1, 0, 1);


#	#
# Authenticate a user against the LonCAPA authentication	# Authenticate a user against the LonCAPA authentication
Line 1606 sub authenticate_handler {	Line 1595 sub authenticate_handler {

return 1;	return 1;
}	}
	&register_handler("auth", \&authenticate_handler, 1, 1, 0);
register_handler("auth", \&authenticate_handler, 1, 1, 0);

#	#
# Change a user's password. Note that this function is complicated by	# Change a user's password. Note that this function is complicated by
Line 1698 sub change_password_handler {	Line 1686 sub change_password_handler {

return 1;	return 1;
}	}
register_handler("passwd", \&change_password_handler, 1, 1, 0);	&register_handler("passwd", \&change_password_handler, 1, 1, 0);


#	#
# Create a new user. User in this case means a lon-capa user.	# Create a new user. User in this case means a lon-capa user.
Line 1738 sub add_user_handler {	Line 1725 sub add_user_handler {
if (-e $passfilename) {	if (-e $passfilename) {
&Failure( $client, "already_exists\n", $userinput);	&Failure( $client, "already_exists\n", $userinput);
} else {	} else {
my @fpparts=split(/\//,$passfilename);
my $fpnow=$fpparts[0].'/'.$fpparts[1].'/'.$fpparts[2];
my $fperror='';	my $fperror='';
for (my $i=3;$i<= ($#fpparts-1);$i++) {	if (!&mkpath($passfilename)) {
$fpnow.='/'.$fpparts[$i];	$fperror="error: ".($!+0)." mkdir failed while attempting "
unless (-e $fpnow) {	."makeuser";
&logthis("mkdir $fpnow");
unless (mkdir($fpnow,0777)) {
$fperror="error: ".($!+0)." mkdir failed while attempting "
."makeuser";
}
}
}	}
unless ($fperror) {	unless ($fperror) {
my $result=&make_passwd_file($uname, $umode,$npass, $passfilename);	my $result=&make_passwd_file($uname, $umode,$npass, $passfilename);
Line 1806 sub change_authentication_handler {	Line 1785 sub change_authentication_handler {
chomp($npass);	chomp($npass);

$npass=&unescape($npass);	$npass=&unescape($npass);
	my $oldauth = &get_auth_type($udom, $uname); # Get old auth info.
my $passfilename = &password_path($udom, $uname);	my $passfilename = &password_path($udom, $uname);
if ($passfilename) { # Not allowed to create a new user!!	if ($passfilename) { # Not allowed to create a new user!!
my $result=&make_passwd_file($uname, $umode,$npass,$passfilename);	my $result=&make_passwd_file($uname, $umode,$npass,$passfilename);
	#
	# If the current auth mode is internal, and the old auth mode was
	# unix, or krb*, and the user is an author for this domain,
	# re-run manage_permissions for that role in order to be able
	# to take ownership of the construction space back to www:www
	#

	if( ($oldauth =~ /^unix/) && ($umode eq "internal")) { # unix -> internal
	if(&is_author($udom, $uname)) {
	&Debug(" Need to manage author permissions...");
	&manage_permissions("/$udom/_au", $udom, $uname, "internal:");
	}
	}


&Reply($client, $result, $userinput);	&Reply($client, $result, $userinput);
} else {	} else {
&Failure($client, "non_authorized\n", $userinput); # Fail the user now.	&Failure($client, "non_authorized\n", $userinput); # Fail the user now.
Line 1964 sub fetch_user_file_handler {	Line 1959 sub fetch_user_file_handler {
# Note that any regular files in the way of this path are	# Note that any regular files in the way of this path are
# wiped out to deal with some earlier folly of mine.	# wiped out to deal with some earlier folly of mine.

my $path = $udir;	if (!&mkpath($udir.'/')) {
if ($ufile =~m\|(.+)/([^/]+)$\|) {	&Failure($client, "unable_to_create\n", $userinput);
my @parts=split('/',$1);
foreach my $part (@parts) {
$path .= '/'.$part;
if( -f $path) {
unlink($path);
}
if ((-e $path)!=1) {
mkdir($path,0770);
}
}
}	}


my $destname=$udir.'/'.$ufile;	my $destname=$udir.'/'.$ufile;
my $transname=$udir.'/'.$ufile.'.in.transit';	my $transname=$udir.'/'.$ufile.'.in.transit';
my $remoteurl='http://'.$clientip.'/userfiles/'.$fname;	my $remoteurl='http://'.$clientip.'/userfiles/'.$fname;
Line 2022 sub fetch_user_file_handler {	Line 2006 sub fetch_user_file_handler {
#	#
# Returns:	# Returns:
# 1 - Continue processing.	# 1 - Continue processing.

sub remove_user_file_handler {	sub remove_user_file_handler {
my ($cmd, $tail, $client) = @_;	my ($cmd, $tail, $client) = @_;

Line 2075 sub remove_user_file_handler {	Line 2058 sub remove_user_file_handler {
#	#
# Returns:	# Returns:
# 1 - Continue processing.	# 1 - Continue processing.

sub mkdir_user_file_handler {	sub mkdir_user_file_handler {
my ($cmd, $tail, $client) = @_;	my ($cmd, $tail, $client) = @_;

Line 2089 sub mkdir_user_file_handler {	Line 2071 sub mkdir_user_file_handler {
} else {	} else {
my $udir = &propath($udom,$uname);	my $udir = &propath($udom,$uname);
if (-e $udir) {	if (-e $udir) {
my $newdir=$udir.'/userfiles/'.$ufile;	my $newdir=$udir.'/userfiles/'.$ufile.'/';
if (!-e $newdir) {	if (!&mkpath($newdir)) {
my @parts=split('/',$newdir);	&Failure($client, "failed\n", "$cmd:$tail");
my $path;
foreach my $part (@parts) {
$path .= '/'.$part;
if (!-e $path) {
&logthis("Making $path");
mkdir($path,0770);
}
}
if (!-e $newdir) {
&Failure($client, "failed\n", "$cmd:$tail");
} else {
&Reply($client, "ok\n", "$cmd:$tail");
}
} else {
&Failure($client, "not_found\n", "$cmd:$tail");
}	}
	&Reply($client, "ok\n", "$cmd:$tail");
} else {	} else {
&Failure($client, "not_home\n", "$cmd:$tail");	&Failure($client, "not_home\n", "$cmd:$tail");
}	}
Line 2125 sub mkdir_user_file_handler {	Line 2093 sub mkdir_user_file_handler {
#	#
# Returns:	# Returns:
# 1 - Continue processing.	# 1 - Continue processing.

sub rename_user_file_handler {	sub rename_user_file_handler {
my ($cmd, $tail, $client) = @_;	my ($cmd, $tail, $client) = @_;

Line 2159 sub rename_user_file_handler {	Line 2126 sub rename_user_file_handler {
}	}
&register_handler("renameuserfile", \&rename_user_file_handler, 0,1,0);	&register_handler("renameuserfile", \&rename_user_file_handler, 0,1,0);


#	#
# Authenticate access to a user file by checking the user's	# Authenticate access to a user file by checking that the token the user's
# session token(?)	# passed also exists in their session file
#	#
# Parameters:	# Parameters:
# cmd - The request keyword that dispatched to tus.	# cmd - The request keyword that dispatched to tus.
Line 2170 sub rename_user_file_handler {	Line 2136 sub rename_user_file_handler {
# client - Filehandle open on the client.	# client - Filehandle open on the client.
# Return:	# Return:
# 1.	# 1.

sub token_auth_user_file_handler {	sub token_auth_user_file_handler {
my ($cmd, $tail, $client) = @_;	my ($cmd, $tail, $client) = @_;

Line 2191 sub token_auth_user_file_handler {	Line 2156 sub token_auth_user_file_handler {
return 1;	return 1;

}	}

&register_handler("tokenauthuserfile", \&token_auth_user_file_handler, 0,1,0);	&register_handler("tokenauthuserfile", \&token_auth_user_file_handler, 0,1,0);


#	#
# Unsubscribe from a resource.	# Unsubscribe from a resource.
#	#
Line 2223 sub unsubscribe_handler {	Line 2186 sub unsubscribe_handler {
return 1;	return 1;
}	}
&register_handler("unsub", \&unsubscribe_handler, 0, 1, 0);	&register_handler("unsub", \&unsubscribe_handler, 0, 1, 0);

# Subscribe to a resource	# Subscribe to a resource
#	#
# Parameters:	# Parameters:
Line 2301 sub activity_log_handler {	Line 2265 sub activity_log_handler {

return 1;	return 1;
}	}
register_handler("log", \&activity_log_handler, 0, 1, 0);	&register_handler("log", \&activity_log_handler, 0, 1, 0);

#	#
# Put a namespace entry in a user profile hash.	# Put a namespace entry in a user profile hash.
Line 2406 sub increment_user_value_handler {	Line 2370 sub increment_user_value_handler {
}	}
&register_handler("inc", \&increment_user_value_handler, 0, 1, 0);	&register_handler("inc", \&increment_user_value_handler, 0, 1, 0);


#	#
# Put a new role for a user. Roles are LonCAPA's packaging of permissions.	# Put a new role for a user. Roles are LonCAPA's packaging of permissions.
# Each 'role' a user has implies a set of permissions. Adding a new role	# Each 'role' a user has implies a set of permissions. Adding a new role
Line 2446 sub roles_put_handler {	Line 2409 sub roles_put_handler {
# is done on close this improves the chances the log will be an un-	# is done on close this improves the chances the log will be an un-
# corrupted ordered thing.	# corrupted ordered thing.
if ($hashref) {	if ($hashref) {
	my $pass_entry = &get_auth_type($udom, $uname);
	my ($auth_type,$pwd) = split(/:/, $pass_entry);
	$auth_type = $auth_type.":";
my @pairs=split(/\&/,$what);	my @pairs=split(/\&/,$what);
foreach my $pair (@pairs) {	foreach my $pair (@pairs) {
my ($key,$value)=split(/=/,$pair);	my ($key,$value)=split(/=/,$pair);
&manage_permissions($key, $udom, $uname,	&manage_permissions($key, $udom, $uname,
&get_auth_type( $udom, $uname));	$auth_type);
$hashref->{$key}=$value;	$hashref->{$key}=$value;
}	}
if (untie($hashref)) {	if (untie($hashref)) {
Line 2611 sub get_profile_entry_encrypted {	Line 2577 sub get_profile_entry_encrypted {
return 1;	return 1;
}	}
&register_handler("eget", \&get_profile_entry_encrypted, 0, 1, 0);	&register_handler("eget", \&get_profile_entry_encrypted, 0, 1, 0);

#	#
# Deletes a key in a user profile database.	# Deletes a key in a user profile database.
#	#
Line 2629 sub get_profile_entry_encrypted {	Line 2596 sub get_profile_entry_encrypted {
# 0 - Exit server.	# 0 - Exit server.
#	#
#	#

sub delete_profile_entry {	sub delete_profile_entry {
my ($cmd, $tail, $client) = @_;	my ($cmd, $tail, $client) = @_;

Line 2658 sub delete_profile_entry {	Line 2624 sub delete_profile_entry {
return 1;	return 1;
}	}
&register_handler("del", \&delete_profile_entry, 0, 1, 0);	&register_handler("del", \&delete_profile_entry, 0, 1, 0);

#	#
# List the set of keys that are defined in a profile database file.	# List the set of keys that are defined in a profile database file.
# A successful reply from this will contain an & separated list of	# A successful reply from this will contain an & separated list of
Line 2836 sub dump_with_regexp {	Line 2803 sub dump_with_regexp {

return 1;	return 1;
}	}

&register_handler("dump", \&dump_with_regexp, 0, 1, 0);	&register_handler("dump", \&dump_with_regexp, 0, 1, 0);

# Store a set of key=value pairs associated with a versioned name.	# Store a set of key=value pairs associated with a versioned name.
Line 2902 sub store_handler {	Line 2868 sub store_handler {
return 1;	return 1;
}	}
&register_handler("store", \&store_handler, 0, 1, 0);	&register_handler("store", \&store_handler, 0, 1, 0);

#	#
# Dump out all versions of a resource that has key=value pairs associated	# Dump out all versions of a resource that has key=value pairs associated
# with it for each version. These resources are built up via the store	# with it for each version. These resources are built up via the store
Line 3002 sub send_chat_handler {	Line 2969 sub send_chat_handler {
return 1;	return 1;
}	}
&register_handler("chatsend", \&send_chat_handler, 0, 1, 0);	&register_handler("chatsend", \&send_chat_handler, 0, 1, 0);

#	#
# Retrieve the set of chat messagss from a discussion board.	# Retrieve the set of chat messagss from a discussion board.
#	#
Line 3296 sub put_id_handler {	Line 3264 sub put_id_handler {

return 1;	return 1;
}	}

&register_handler("idput", \&put_id_handler, 0, 1, 0);	&register_handler("idput", \&put_id_handler, 0, 1, 0);

#	#
# Retrieves a set of id values from the id database.	# Retrieves a set of id values from the id database.
# Returns an & separated list of results, one for each requested id to the	# Returns an & separated list of results, one for each requested id to the
Line 3346 sub get_id_handler {	Line 3314 sub get_id_handler {

return 1;	return 1;
}	}
	&register_handler("idget", \&get_id_handler, 0, 1, 0);
register_handler("idget", \&get_id_handler, 0, 1, 0);

#	#
# Process the tmpput command I'm not sure what this does.. Seems to	# Process the tmpput command I'm not sure what this does.. Seems to
Line 3390 sub tmp_put_handler {	Line 3357 sub tmp_put_handler {

}	}
&register_handler("tmpput", \&tmp_put_handler, 0, 1, 0);	&register_handler("tmpput", \&tmp_put_handler, 0, 1, 0);

# Processes the tmpget command. This command returns the contents	# Processes the tmpget command. This command returns the contents
# of a temporary resource file(?) created via tmpput.	# of a temporary resource file(?) created via tmpput.
#	#
Line 3402 sub tmp_put_handler {	Line 3370 sub tmp_put_handler {
# 1 - Inidcating processing can continue.	# 1 - Inidcating processing can continue.
# Side effects:	# Side effects:
# A reply is sent to the client.	# A reply is sent to the client.

#	#
sub tmp_get_handler {	sub tmp_get_handler {
my ($cmd, $id, $client) = @_;	my ($cmd, $id, $client) = @_;
Line 3425 sub tmp_get_handler {	Line 3392 sub tmp_get_handler {
return 1;	return 1;
}	}
&register_handler("tmpget", \&tmp_get_handler, 0, 1, 0);	&register_handler("tmpget", \&tmp_get_handler, 0, 1, 0);

#	#
# Process the tmpdel command. This command deletes a temp resource	# Process the tmpdel command. This command deletes a temp resource
# created by the tmpput command.	# created by the tmpput command.
Line 3458 sub tmp_del_handler {	Line 3426 sub tmp_del_handler {

}	}
&register_handler("tmpdel", \&tmp_del_handler, 0, 1, 0);	&register_handler("tmpdel", \&tmp_del_handler, 0, 1, 0);

#	#
# Processes the setannounce command. This command	# Processes the setannounce command. This command
# creates a file named announce.txt in the top directory of	# creates a file named announce.txt in the top directory of
Line 3496 sub set_announce_handler {	Line 3465 sub set_announce_handler {
return 1;	return 1;
}	}
&register_handler("setannounce", \&set_announce_handler, 0, 1, 0);	&register_handler("setannounce", \&set_announce_handler, 0, 1, 0);

#	#
# Return the version of the daemon. This can be used to determine	# Return the version of the daemon. This can be used to determine
# the compatibility of cross version installations or, alternatively to	# the compatibility of cross version installations or, alternatively to
Line 3520 sub get_version_handler {	Line 3490 sub get_version_handler {
return 1;	return 1;
}	}
&register_handler("version", \&get_version_handler, 0, 1, 0);	&register_handler("version", \&get_version_handler, 0, 1, 0);

# Set the current host and domain. This is used to support	# Set the current host and domain. This is used to support
# multihomed systems. Each IP of the system, or even separate daemons	# multihomed systems. Each IP of the system, or even separate daemons
# on the same IP can be treated as handling a separate lonCAPA virtual	# on the same IP can be treated as handling a separate lonCAPA virtual
Line 3656 sub validate_course_owner_handler {	Line 3627 sub validate_course_owner_handler {
return 1;	return 1;
}	}
&register_handler("autonewcourse", \&validate_course_owner_handler, 0, 1, 0);	&register_handler("autonewcourse", \&validate_course_owner_handler, 0, 1, 0);

#	#
# Validate a course section in the official schedule of classes	# Validate a course section in the official schedule of classes
# from the institutions point of view (part of autoenrollment).	# from the institutions point of view (part of autoenrollment).
Line 3736 sub create_auto_enroll_password_handler	Line 3708 sub create_auto_enroll_password_handler
#	#
# Returns:	# Returns:
# 1 - Continue processing.	# 1 - Continue processing.

sub retrieve_auto_file_handler {	sub retrieve_auto_file_handler {
my ($cmd, $tail, $client) = @_;	my ($cmd, $tail, $client) = @_;
my $userinput = "cmd:$tail";	my $userinput = "cmd:$tail";
Line 3825 sub get_institutional_code_format_handle	Line 3796 sub get_institutional_code_format_handle
&register_handler("autoinstcodeformat", \&get_institutional_code_format_handler,	&register_handler("autoinstcodeformat", \&get_institutional_code_format_handler,
0,1,0);	0,1,0);

#	# mkpath makes all directories for a file, expects an absolute path with a
#	# file or a trailing / if just a dir is passed
#	# returns 1 on success 0 on failure
#	sub mkpath {
#	my ($file)=@_;
	my @parts=split(/\//,$file,-1);
	my $now=$parts[0].'/'.$parts[1].'/'.$parts[2];
	for (my $i=3;$i<= ($#parts-1);$i++) {
	$now.='/'.$parts[$i];
	if (!-e $now) {
	if (!mkdir($now,0770)) { return 0; }
	}
	}
	return 1;
	}


#---------------------------------------------------------------	#---------------------------------------------------------------
#	#
# Getting, decoding and dispatching requests:	# Getting, decoding and dispatching requests:
#	#

#	#
# Get a Request:	# Get a Request:
# Gets a Request message from the client. The transaction	# Gets a Request message from the client. The transaction
Line 3941 sub process_request {	Line 3923 sub process_request {

}	}

#------------------- Commands not yet in spearate handlers. --------------	print $client "unknown_cmd\n";

#------------------------------- is auto-enrollment enabled?
if ($userinput =~/^autorun/) {
if (isClient) {
my ($cmd,$cdom) = split(/:/,$userinput);
my $outcome = &localenroll::run($cdom);
print $client "$outcome\n";
} else {
print $client "0\n";
}
#------------------------------- get official sections (for auto-enrollment).
} elsif ($userinput =~/^autogetsections/) {
if (isClient) {
my ($cmd,$coursecode,$cdom)=split(/:/,$userinput);
my @secs = &localenroll::get_sections($coursecode,$cdom);
my $seclist = &escape(join(':',@secs));
print $client "$seclist\n";
} else {
print $client "refused\n";
}
#----------------------- validate owner of new course section (for auto-enrollment).
} elsif ($userinput =~/^autonewcourse/) {
if (isClient) {
my ($cmd,$inst_course_id,$owner,$cdom)=split(/:/,$userinput);
my $outcome = &localenroll::new_course($inst_course_id,$owner,$cdom);
print $client "$outcome\n";
} else {
print $client "refused\n";
}
#-------------- validate course section in schedule of classes (for auto-enrollment).
} elsif ($userinput =~/^autovalidatecourse/) {
if (isClient) {
my ($cmd,$inst_course_id,$cdom)=split(/:/,$userinput);
my $outcome=&localenroll::validate_courseID($inst_course_id,$cdom);
print $client "$outcome\n";
} else {
print $client "refused\n";
}
#--------------------------- create password for new user (for auto-enrollment).
} elsif ($userinput =~/^autocreatepassword/) {
if (isClient) {
my ($cmd,$authparam,$cdom)=split(/:/,$userinput);
my ($create_passwd,$authchk);
($authparam,$create_passwd,$authchk) = &localenroll::create_password($authparam,$cdom);
print $client &escape($authparam.':'.$create_passwd.':'.$authchk)."\n";
} else {
print $client "refused\n";
}
#--------------------------- read and remove temporary files (for auto-enrollment).
} elsif ($userinput =~/^autoretrieve/) {
if (isClient) {
my ($cmd,$filename) = split(/:/,$userinput);
my $source = $perlvar{'lonDaemons'}.'/tmp/'.$filename;
if ( (-e $source) && ($filename ne '') ) {
my $reply = '';
if (open(my $fh,$source)) {
while (<$fh>) {
chomp($_);
$_ =~ s/^\s+//g;
$_ =~ s/\s+$//g;
$reply .= $_;
}
close($fh);
print $client &escape($reply)."\n";
# unlink($source);
} else {
print $client "error\n";
}
} else {
print $client "error\n";
}
} else {
print $client "refused\n";
}
#--------------------- read and retrieve institutional code format
# (for support form).
} elsif ($userinput =~/^autoinstcodeformat/) {
if (isClient) {
my $reply;
my($cmd,$cdom,$course) = split(/:/,$userinput);
my @pairs = split/\&/,$course;
my %instcodes = ();
my %codes = ();
my @codetitles = ();
my %cat_titles = ();
my %cat_order = ();
foreach (@pairs) {
my ($key,$value) = split/=/,$_;
$instcodes{&unescape($key)} = &unescape($value);
}
my $formatreply = &localenroll::instcode_format($cdom,\%instcodes,\%codes,\@codetitles,\%cat_titles,\%cat_order);
if ($formatreply eq 'ok') {
my $codes_str = &hash2str(%codes);
my $codetitles_str = &array2str(@codetitles);
my $cat_titles_str = &hash2str(%cat_titles);
my $cat_order_str = &hash2str(%cat_order);
print $client $codes_str.':'.$codetitles_str.':'.$cat_titles_str.':'.$cat_order_str."\n";
}
} else {
print $client "refused\n";
}
# ------------------------------------------------------------- unknown command

} else {
# unknown command
print $client "unknown_cmd\n";
}
# -------------------------------------------------------------------- complete	# -------------------------------------------------------------------- complete
Debug("process_request - returning 1");	Debug("process_request - returning 1");
return 1;	return 1;
Line 4923 sub make_new_child {	Line 4798 sub make_new_child {
exit;	exit;

}	}
	#
	# Determine if a user is an author for the indicated domain.
	#
	# Parameters:
	# domain - domain to check in .
	# user - Name of user to check.
	#
	# Return:
	# 1 - User is an author for domain.
	# 0 - User is not an author for domain.
	sub is_author {
	my ($domain, $user) = @_;

	&Debug("is_author: $user @ $domain");

	my $hashref = &tie_user_hash($domain, $user, "roles",
	&GDBM_READER());

	# Author role should show up as a key /domain/_au

	my $key = "/$domain/_au";
	my $value = $hashref->{$key};

	if(defined($value)) {
	&Debug("$user @ $domain is an author");
	}

	return defined($value);
	}
#	#
# Checks to see if the input roleput request was to set	# Checks to see if the input roleput request was to set
# an author role. If so, invokes the lchtmldir script to set	# an author role. If so, invokes the lchtmldir script to set
Line 4939 sub make_new_child {	Line 4841 sub make_new_child {
sub manage_permissions	sub manage_permissions
{	{


my ($request, $domain, $user, $authtype) = @_;	my ($request, $domain, $user, $authtype) = @_;

	&Debug("manage_permissions: $request $domain $user $authtype");

# See if the request is of the form /$domain/_au	# See if the request is of the form /$domain/_au
if($request =~ /^(\/$domain\/_au)$/) { # It's an author rolesput...	if($request =~ /^(\/$domain\/_au)$/) { # It's an author rolesput...
my $execdir = $perlvar{'lonDaemons'};	my $execdir = $perlvar{'lonDaemons'};
my $userhome= "/home/$user" ;	my $userhome= "/home/$user" ;
&logthis("system $execdir/lchtmldir $userhome $user $authtype");	&logthis("system $execdir/lchtmldir $userhome $user $authtype");
	&Debug("Setting homedir permissions for $userhome");
system("$execdir/lchtmldir $userhome $user $authtype");	system("$execdir/lchtmldir $userhome $user $authtype");
}	}
}	}
Line 4961 sub manage_permissions	Line 4867 sub manage_permissions
#	#
sub password_path {	sub password_path {
my ($domain, $user) = @_;	my ($domain, $user) = @_;
	return &propath($domain, $user).'/passwd';

my $path = &propath($domain, $user);
$path .= "/passwd";

return $path;
}	}

# Password Filename	# Password Filename
Line 5041 sub get_auth_type	Line 4942 sub get_auth_type
Debug("Password info = $realpassword\n");	Debug("Password info = $realpassword\n");
my ($authtype, $contentpwd) = split(/:/, $realpassword);	my ($authtype, $contentpwd) = split(/:/, $realpassword);
Debug("Authtype = $authtype, content = $contentpwd\n");	Debug("Authtype = $authtype, content = $contentpwd\n");
my $availinfo = '';	return "$authtype:$contentpwd";
if($authtype eq 'krb4' or $authtype eq 'krb5') {
$availinfo = $contentpwd;
}

return "$authtype:$availinfo";
} else {	} else {
Debug("Returning nouser");	Debug("Returning nouser");
return "nouser";	return "nouser";
Line 5395 sub make_passwd_file {	Line 5291 sub make_passwd_file {
if ($umode eq 'krb4' or $umode eq 'krb5') {	if ($umode eq 'krb4' or $umode eq 'krb5') {
{	{
my $pf = IO::File->new(">$passfilename");	my $pf = IO::File->new(">$passfilename");
print $pf "$umode:$npass\n";	if ($pf) {
	print $pf "$umode:$npass\n";
	} else {
	$result = "pass_file_failed_error";
	}
}	}
} elsif ($umode eq 'internal') {	} elsif ($umode eq 'internal') {
my $salt=time;	my $salt=time;
Line 5404 sub make_passwd_file {	Line 5304 sub make_passwd_file {
{	{
&Debug("Creating internal auth");	&Debug("Creating internal auth");
my $pf = IO::File->new(">$passfilename");	my $pf = IO::File->new(">$passfilename");
print $pf "internal:$ncpass\n";	if($pf) {
	print $pf "internal:$ncpass\n";
	} else {
	$result = "pass_file_failed_error";
	}
}	}
} elsif ($umode eq 'localauth') {	} elsif ($umode eq 'localauth') {
{	{
my $pf = IO::File->new(">$passfilename");	my $pf = IO::File->new(">$passfilename");
print $pf "localauth:$npass\n";	if($pf) {
	print $pf "localauth:$npass\n";
	} else {
	$result = "pass_file_failed_error";
	}
}	}
} elsif ($umode eq 'unix') {	} elsif ($umode eq 'unix') {
{	{
Line 5448 sub make_passwd_file {	Line 5356 sub make_passwd_file {
$result = "lcuseradd_failed:$error_text\n";	$result = "lcuseradd_failed:$error_text\n";
} else {	} else {
my $pf = IO::File->new(">$passfilename");	my $pf = IO::File->new(">$passfilename");
print $pf "unix:\n";	if($pf) {
	print $pf "unix:\n";
	} else {
	$result = "pass_file_failed_error";
	}
}	}
}	}
} elsif ($umode eq 'none') {	} elsif ($umode eq 'none') {
{	{
my $pf = IO::File->new("> $passfilename");	my $pf = IO::File->new("> $passfilename");
print $pf "none:\n";	if($pf) {
	print $pf "none:\n";
	} else {
	$result = "pass_file_failed_error";
	}
}	}
} else {	} else {
$result="auth_mode_error\n";	$result="auth_mode_error\n";

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>

Removed from v.1.257
changed lines
	Added in v.1.264