[BACK]Return to lond CVS log [TXT] [DIR] Up to [LON-CAPA] / loncom

Diff for /loncom/lond between versions 1.178.2.15 and 1.288

version 1.178.2.15, 2004/04/13 09:41:57 version 1.288, 2005/06/27 14:16:30
Line 20 Line 20
 #  #
 # You should have received a copy of the GNU General Public License  # You should have received a copy of the GNU General Public License
 # along with LON-CAPA; if not, write to the Free Software  # along with LON-CAPA; if not, write to the Free Software
 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA      # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 #  #
 # /home/httpd/html/adm/gpl.txt  # /home/httpd/html/adm/gpl.txt
 #  #
Line 45  use Authen::Krb4; Line 45  use Authen::Krb4;
 use Authen::Krb5;  use Authen::Krb5;
 use lib '/home/httpd/lib/perl/';  use lib '/home/httpd/lib/perl/';
 use localauth;  use localauth;
   use localenroll;
   use localstudentphoto;
 use File::Copy;  use File::Copy;
 use LONCAPA::ConfigFileEdit;  use LONCAPA::ConfigFileEdit;
   use LONCAPA::lonlocal;
   use LONCAPA::lonssl;
   use Fcntl qw(:flock);
   
 my $DEBUG = 1;       # Non zero to enable debug log entries.  my $DEBUG = 0;       # Non zero to enable debug log entries.
   
 my $status='';  my $status='';
 my $lastlog='';  my $lastlog='';
   
 my $VERSION='$Revision$'; #' stupid emacs  my $VERSION='$Revision$'; #' stupid emacs
 my $remoteVERSION;  my $remoteVERSION;
 my $currenthostid;  my $currenthostid="default";
 my $currentdomainid;  my $currentdomainid;
   
 my $client;  my $client;
 my $clientip;  my $clientip; # IP address of client.
 my $clientname;  my $clientname; # LonCAPA name of client.
   
 my $cipher; # Cipher key negotiated with client.  
 my $tmpsnum = 0;; # Id of tmpputs.  
   
 my $server;  my $server;
 my $thisserver;  my $thisserver; # DNS of us.
   
   my $keymode;
   
   my $cipher; # Cipher key negotiated with client
   my $tmpsnum = 0; # Id of tmpputs.
   
 #   # 
 #   Connection type is:  #   Connection type is:
Line 77  my $thisserver; Line 84  my $thisserver;
   
 my $ConnectionType;  my $ConnectionType;
   
 my %hostid;  my %hostid; # ID's for hosts in cluster by ip.
 my %hostdom;  my %hostdom; # LonCAPA domain for hosts in cluster.
 my %hostip;  my %hostip; # IPs for hosts in cluster.
   my %hostdns; # ID's of hosts looked up by DNS name.
   
 my %managers; # Ip -> manager names  my %managers; # Ip -> manager names
   
Line 98  my $CLIENT_OK  = 1; Line 106  my $CLIENT_OK  = 1;
 my $MANAGER_OK = 2;  my $MANAGER_OK = 2;
 my %Dispatcher;  my %Dispatcher;
   
   
 #  #
 #  The array below are password error strings."  #  The array below are password error strings."
 #  #
 my $lastpwderror    = 13; # Largest error number from lcpasswd.  my $lastpwderror    = 13; # Largest error number from lcpasswd.
 my @passwderrors = ("ok",  my @passwderrors = ("ok",
    "lcpasswd must be run as user 'www'",     "pwchange_failure - lcpasswd must be run as user 'www'",
    "lcpasswd got incorrect number of arguments",     "pwchange_failure - lcpasswd got incorrect number of arguments",
    "lcpasswd did not get the right nubmer of input text lines",     "pwchange_failure - lcpasswd did not get the right nubmer of input text lines",
    "lcpasswd too many simultaneous pwd changes in progress",     "pwchange_failure - lcpasswd too many simultaneous pwd changes in progress",
    "lcpasswd User does not exist.",     "pwchange_failure - lcpasswd User does not exist.",
    "lcpasswd Incorrect current passwd",     "pwchange_failure - lcpasswd Incorrect current passwd",
    "lcpasswd Unable to su to root.",     "pwchange_failure - lcpasswd Unable to su to root.",
    "lcpasswd Cannot set new passwd.",     "pwchange_failure - lcpasswd Cannot set new passwd.",
    "lcpasswd Username has invalid characters",     "pwchange_failure - lcpasswd Username has invalid characters",
    "lcpasswd Invalid characters in password",     "pwchange_failure - lcpasswd Invalid characters in password",
     "11", "12",     "pwchange_failure - lcpasswd User already exists", 
     "lcpasswd Password mismatch");                     "pwchange_failure - lcpasswd Something went wrong with user addition.",
      "pwchange_failure - lcpasswd Password mismatch",
      "pwchange_failure - lcpasswd Error filename is invalid");
   
   
 #  The array below are lcuseradd error strings.:  #  The array below are lcuseradd error strings.:
Line 135  my @adderrors    = ("ok", Line 146  my @adderrors    = ("ok",
     "lcuseradd Could not add user.",      "lcuseradd Could not add user.",
     "lcuseradd Password mismatch");      "lcuseradd Password mismatch");
   
   
   
 #  #
 #   Statistics that are maintained and dislayed in the status line.  #   Statistics that are maintained and dislayed in the status line.
 #  #
 my $Transactions; # Number of attempted transactions.  my $Transactions = 0; # Number of attempted transactions.
 my $Failures; # Number of transcations failed.  my $Failures     = 0; # Number of transcations failed.
   
 #   ResetStatistics:   #   ResetStatistics: 
 #      Resets the statistics counters:  #      Resets the statistics counters:
Line 149  sub ResetStatistics { Line 162  sub ResetStatistics {
     $Failures     = 0;      $Failures     = 0;
 }  }
   
   #------------------------------------------------------------------------
   #
   #   LocalConnection
   #     Completes the formation of a locally authenticated connection.
   #     This function will ensure that the 'remote' client is really the
   #     local host.  If not, the connection is closed, and the function fails.
   #     If so, initcmd is parsed for the name of a file containing the
   #     IDEA session key.  The fie is opened, read, deleted and the session
   #     key returned to the caller.
   #
   # Parameters:
   #   $Socket      - Socket open on client.
   #   $initcmd     - The full text of the init command.
   #
   # Implicit inputs:
   #    $thisserver - Our DNS name.
   #
   # Returns:
   #     IDEA session key on success.
   #     undef on failure.
   #
   sub LocalConnection {
       my ($Socket, $initcmd) = @_;
       Debug("Attempting local connection: $initcmd client: $clientip me: $thisserver");
       if($clientip ne "127.0.0.1") {
    &logthis('<font color="red"> LocalConnection rejecting non local: '
    ."$clientip ne $thisserver </font>");
    close $Socket;
    return undef;
       }  else {
    chomp($initcmd); # Get rid of \n in filename.
    my ($init, $type, $name) = split(/:/, $initcmd);
    Debug(" Init command: $init $type $name ");
   
    # Require that $init = init, and $type = local:  Otherwise
    # the caller is insane:
   
    if(($init ne "init") && ($type ne "local")) {
       &logthis('<font color = "red"> LocalConnection: caller is insane! '
        ."init = $init, and type = $type </font>");
       close($Socket);;
       return undef;
   
    }
    #  Now get the key filename:
   
    my $IDEAKey = lonlocal::ReadKeyFile($name);
    return $IDEAKey;
       }
   }
   #------------------------------------------------------------------------------
   #
   #  SSLConnection
   #   Completes the formation of an ssh authenticated connection. The
   #   socket is promoted to an ssl socket.  If this promotion and the associated
   #   certificate exchange are successful, the IDEA key is generated and sent
   #   to the remote peer via the SSL tunnel. The IDEA key is also returned to
   #   the caller after the SSL tunnel is torn down.
   #
   # Parameters:
   #   Name              Type             Purpose
   #   $Socket          IO::Socket::INET  Plaintext socket.
   #
   # Returns:
   #    IDEA key on success.
   #    undef on failure.
   #
   sub SSLConnection {
       my $Socket   = shift;
   
       Debug("SSLConnection: ");
       my $KeyFile         = lonssl::KeyFile();
       if(!$KeyFile) {
    my $err = lonssl::LastError();
    &logthis("<font color=\"red\"> CRITICAL"
    ."Can't get key file $err </font>");
    return undef;
       }
       my ($CACertificate,
    $Certificate) = lonssl::CertificateFile();
   
   
       # If any of the key, certificate or certificate authority 
       # certificate filenames are not defined, this can't work.
   
       if((!$Certificate) || (!$CACertificate)) {
    my $err = lonssl::LastError();
    &logthis("<font color=\"red\"> CRITICAL"
    ."Can't get certificates: $err </font>");
   
    return undef;
       }
       Debug("Key: $KeyFile CA: $CACertificate Cert: $Certificate");
   
       # Indicate to our peer that we can procede with
       # a transition to ssl authentication:
   
       print $Socket "ok:ssl\n";
   
       Debug("Approving promotion -> ssl");
       #  And do so:
   
       my $SSLSocket = lonssl::PromoteServerSocket($Socket,
    $CACertificate,
    $Certificate,
    $KeyFile);
       if(! ($SSLSocket) ) { # SSL socket promotion failed.
    my $err = lonssl::LastError();
    &logthis("<font color=\"red\"> CRITICAL "
    ."SSL Socket promotion failed: $err </font>");
    return undef;
       }
       Debug("SSL Promotion successful");
   
       # 
       #  The only thing we'll use the socket for is to send the IDEA key
       #  to the peer:
   
       my $Key = lonlocal::CreateCipherKey();
       print $SSLSocket "$Key\n";
   
       lonssl::Close($SSLSocket); 
   
       Debug("Key exchange complete: $Key");
   
       return $Key;
   }
   #
   #     InsecureConnection: 
   #        If insecure connections are allowd,
   #        exchange a challenge with the client to 'validate' the
   #        client (not really, but that's the protocol):
   #        We produce a challenge string that's sent to the client.
   #        The client must then echo the challenge verbatim to us.
   #
   #  Parameter:
   #      Socket      - Socket open on the client.
   #  Returns:
   #      1           - success.
   #      0           - failure (e.g.mismatch or insecure not allowed).
   #
   sub InsecureConnection {
       my $Socket  =  shift;
   
       #   Don't even start if insecure connections are not allowed.
   
       if(! $perlvar{londAllowInsecure}) { # Insecure connections not allowed.
    return 0;
       }
   
       #   Fabricate a challenge string and send it..
   
       my $challenge = "$$".time; # pid + time.
       print $Socket "$challenge\n";
       &status("Waiting for challenge reply");
   
       my $answer = <$Socket>;
       $answer    =~s/\W//g;
       if($challenge eq $answer) {
    return 1;
       } else {
    logthis("<font color='blue'>WARNING client did not respond to challenge</font>");
    &status("No challenge reqply");
    return 0;
       }
       
   
   }
   #
   #   Safely execute a command (as long as it's not a shel command and doesn
   #   not require/rely on shell escapes.   The function operates by doing a
   #   a pipe based fork and capturing stdout and stderr  from the pipe.
   #
   # Formal Parameters:
   #     $line                    - A line of text to be executed as a command.
   # Returns:
   #     The output from that command.  If the output is multiline the caller
   #     must know how to split up the output.
   #
   #
   sub execute_command {
       my ($line)    = @_;
       my @words     = split(/\s/, $line); # Bust the command up into words.
       my $output    = "";
   
       my $pid = open(CHILD, "-|");
       
       if($pid) { # Parent process
    Debug("In parent process for execute_command");
    my @data = <CHILD>; # Read the child's outupt...
    close CHILD;
    foreach my $output_line (@data) {
       Debug("Adding $output_line");
       $output .= $output_line; # Presumably has a \n on it.
    }
   
       } else { # Child process
    close (STDERR);
    open  (STDERR, ">&STDOUT");# Combine stderr, and stdout...
    exec(@words); # won't return.
       }
       return $output;
   }
   
   
   #   GetCertificate: Given a transaction that requires a certificate,
   #   this function will extract the certificate from the transaction
   #   request.  Note that at this point, the only concept of a certificate
   #   is the hostname to which we are connected.
   #
   #   Parameter:
   #      request   - The request sent by our client (this parameterization may
   #                  need to change when we really use a certificate granting
   #                  authority.
   #
   sub GetCertificate {
       my $request = shift;
   
       return $clientip;
   }
   
 #  #
 #   Return true if client is a manager.  #   Return true if client is a manager.
 #  #
Line 161  sub isManager { Line 395  sub isManager {
 sub isClient {  sub isClient {
     return (($ConnectionType eq "client") || ($ConnectionType eq "both"));      return (($ConnectionType eq "client") || ($ConnectionType eq "both"));
 }  }
   
   
   #
   #   ReadManagerTable: Reads in the current manager table. For now this is
   #                     done on each manager authentication because:
   #                     - These authentications are not frequent
   #                     - This allows dynamic changes to the manager table
   #                       without the need to signal to the lond.
   #
   sub ReadManagerTable {
   
       #   Clean out the old table first..
   
      foreach my $key (keys %managers) {
         delete $managers{$key};
      }
   
      my $tablename = $perlvar{'lonTabDir'}."/managers.tab";
      if (!open (MANAGERS, $tablename)) {
         logthis('<font color="red">No manager table.  Nobody can manage!!</font>');
         return;
      }
      while(my $host = <MANAGERS>) {
         chomp($host);
         if ($host =~ "^#") {                  # Comment line.
            next;
         }
         if (!defined $hostip{$host}) { # This is a non cluster member
       #  The entry is of the form:
       #    cluname:hostname
       #  cluname - A 'cluster hostname' is needed in order to negotiate
       #            the host key.
       #  hostname- The dns name of the host.
       #
             my($cluname, $dnsname) = split(/:/, $host);
             
             my $ip = gethostbyname($dnsname);
             if(defined($ip)) {                 # bad names don't deserve entry.
               my $hostip = inet_ntoa($ip);
               $managers{$hostip} = $cluname;
               logthis('<font color="green"> registering manager '.
                       "$dnsname as $cluname with $hostip </font>\n");
            }
         } else {
            logthis('<font color="green"> existing host'." $host</font>\n");
            $managers{$hostip{$host}} = $host;  # Use info from cluster tab if clumemeber
         }
      }
   }
   
   #
   #  ValidManager: Determines if a given certificate represents a valid manager.
   #                in this primitive implementation, the 'certificate' is
   #                just the connecting loncapa client name.  This is checked
   #                against a valid client list in the configuration.
   #
   #                  
   sub ValidManager {
       my $certificate = shift; 
   
       return isManager;
   }
   #
   #  CopyFile:  Called as part of the process of installing a 
   #             new configuration file.  This function copies an existing
   #             file to a backup file.
   # Parameters:
   #     oldfile  - Name of the file to backup.
   #     newfile  - Name of the backup file.
   # Return:
   #     0   - Failure (errno has failure reason).
   #     1   - Success.
   #
   sub CopyFile {
   
       my ($oldfile, $newfile) = @_;
   
       if (! copy($oldfile,$newfile)) {
           return 0;
       }
       chmod(0660, $newfile);
       return 1;
   }
   #
   #  Host files are passed out with externally visible host IPs.
   #  If, for example, we are behind a fire-wall or NAT host, our 
   #  internally visible IP may be different than the externally
   #  visible IP.  Therefore, we always adjust the contents of the
   #  host file so that the entry for ME is the IP that we believe
   #  we have.  At present, this is defined as the entry that
   #  DNS has for us.  If by some chance we are not able to get a
   #  DNS translation for us, then we assume that the host.tab file
   #  is correct.  
   #    BUGBUGBUG - in the future, we really should see if we can
   #       easily query the interface(s) instead.
   # Parameter(s):
   #     contents    - The contents of the host.tab to check.
   # Returns:
   #     newcontents - The adjusted contents.
   #
   #
   sub AdjustHostContents {
       my $contents  = shift;
       my $adjusted;
       my $me        = $perlvar{'lonHostID'};
   
    foreach my $line (split(/\n/,$contents)) {
    if(!(($line eq "") || ($line =~ /^ *\#/) || ($line =~ /^ *$/))) {
       chomp($line);
       my ($id,$domain,$role,$name,$ip,$maxcon,$idleto,$mincon)=split(/:/,$line);
       if ($id eq $me) {
             my $ip = gethostbyname($name);
             my $ipnew = inet_ntoa($ip);
            $ip = $ipnew;
    #  Reconstruct the host line and append to adjusted:
   
      my $newline = "$id:$domain:$role:$name:$ip";
      if($maxcon ne "") { # Not all hosts have loncnew tuning params
        $newline .= ":$maxcon:$idleto:$mincon";
      }
      $adjusted .= $newline."\n";
   
         } else { # Not me, pass unmodified.
      $adjusted .= $line."\n";
         }
    } else {                  # Blank or comment never re-written.
       $adjusted .= $line."\n"; # Pass blanks and comments as is.
    }
    }
    return $adjusted;
   }
   #
   #   InstallFile: Called to install an administrative file:
   #       - The file is created with <name>.tmp
   #       - The <name>.tmp file is then mv'd to <name>
   #   This lugubrious procedure is done to ensure that we are never without
   #   a valid, even if dated, version of the file regardless of who crashes
   #   and when the crash occurs.
   #
   #  Parameters:
   #       Name of the file
   #       File Contents.
   #  Return:
   #      nonzero - success.
   #      0       - failure and $! has an errno.
   #
   sub InstallFile {
   
       my ($Filename, $Contents) = @_;
       my $TempFile = $Filename.".tmp";
   
       #  Open the file for write:
   
       my $fh = IO::File->new("> $TempFile"); # Write to temp.
       if(!(defined $fh)) {
    &logthis('<font color="red"> Unable to create '.$TempFile."</font>");
    return 0;
       }
       #  write the contents of the file:
   
       print $fh ($Contents); 
       $fh->close; # In case we ever have a filesystem w. locking
   
       chmod(0660, $TempFile);
   
       # Now we can move install the file in position.
       
       move($TempFile, $Filename);
   
       return 1;
   }
   
   
   #
   #   ConfigFileFromSelector: converts a configuration file selector
   #                 (one of host or domain at this point) into a 
   #                 configuration file pathname.
   #
   #  Parameters:
   #      selector  - Configuration file selector.
   #  Returns:
   #      Full path to the file or undef if the selector is invalid.
   #
   sub ConfigFileFromSelector {
       my $selector   = shift;
       my $tablefile;
   
       my $tabledir = $perlvar{'lonTabDir'}.'/';
       if ($selector eq "hosts") {
    $tablefile = $tabledir."hosts.tab";
       } elsif ($selector eq "domain") {
    $tablefile = $tabledir."domain.tab";
       } else {
    return undef;
       }
       return $tablefile;
   
   }
   #
   #   PushFile:  Called to do an administrative push of a file.
   #              - Ensure the file being pushed is one we support.
   #              - Backup the old file to <filename.saved>
   #              - Separate the contents of the new file out from the
   #                rest of the request.
   #              - Write the new file.
   #  Parameter:
   #     Request - The entire user request.  This consists of a : separated
   #               string pushfile:tablename:contents.
   #     NOTE:  The contents may have :'s in it as well making things a bit
   #            more interesting... but not much.
   #  Returns:
   #     String to send to client ("ok" or "refused" if bad file).
   #
   sub PushFile {
       my $request = shift;    
       my ($command, $filename, $contents) = split(":", $request, 3);
       
       #  At this point in time, pushes for only the following tables are
       #  supported:
       #   hosts.tab  ($filename eq host).
       #   domain.tab ($filename eq domain).
       # Construct the destination filename or reject the request.
       #
       # lonManage is supposed to ensure this, however this session could be
       # part of some elaborate spoof that managed somehow to authenticate.
       #
   
   
       my $tablefile = ConfigFileFromSelector($filename);
       if(! (defined $tablefile)) {
    return "refused";
       }
       #
       # >copy< the old table to the backup table
       #        don't rename in case system crashes/reboots etc. in the time
       #        window between a rename and write.
       #
       my $backupfile = $tablefile;
       $backupfile    =~ s/\.tab$/.old/;
       if(!CopyFile($tablefile, $backupfile)) {
    &logthis('<font color="green"> CopyFile from '.$tablefile." to ".$backupfile." failed </font>");
    return "error:$!";
       }
       &logthis('<font color="green"> Pushfile: backed up '
       .$tablefile." to $backupfile</font>");
       
       #  If the file being pushed is the host file, we adjust the entry for ourself so that the
       #  IP will be our current IP as looked up in dns.  Note this is only 99% good as it's possible
       #  to conceive of conditions where we don't have a DNS entry locally.  This is possible in a 
       #  network sense but it doesn't make much sense in a LonCAPA sense so we ignore (for now)
       #  that possibilty.
   
       if($filename eq "host") {
    $contents = AdjustHostContents($contents);
       }
   
       #  Install the new file:
   
       if(!InstallFile($tablefile, $contents)) {
    &logthis('<font color="red"> Pushfile: unable to install '
    .$tablefile." $! </font>");
    return "error:$!";
       } else {
    &logthis('<font color="green"> Installed new '.$tablefile
    ."</font>");
   
       }
   
   
       #  Indicate success:
    
       return "ok";
   
   }
   
   #
   #  Called to re-init either lonc or lond.
   #
   #  Parameters:
   #    request   - The full request by the client.  This is of the form
   #                reinit:<process>  
   #                where <process> is allowed to be either of 
   #                lonc or lond
   #
   #  Returns:
   #     The string to be sent back to the client either:
   #   ok         - Everything worked just fine.
   #   error:why  - There was a failure and why describes the reason.
   #
   #
   sub ReinitProcess {
       my $request = shift;
   
   
       # separate the request (reinit) from the process identifier and
       # validate it producing the name of the .pid file for the process.
       #
       #
       my ($junk, $process) = split(":", $request);
       my $processpidfile = $perlvar{'lonDaemons'}.'/logs/';
       if($process eq 'lonc') {
    $processpidfile = $processpidfile."lonc.pid";
    if (!open(PIDFILE, "< $processpidfile")) {
       return "error:Open failed for $processpidfile";
    }
    my $loncpid = <PIDFILE>;
    close(PIDFILE);
    logthis('<font color="red"> Reinitializing lonc pid='.$loncpid
    ."</font>");
    kill("USR2", $loncpid);
       } elsif ($process eq 'lond') {
    logthis('<font color="red"> Reinitializing self (lond) </font>');
    &UpdateHosts; # Lond is us!!
       } else {
    &logthis('<font color="yellow" Invalid reinit request for '.$process
    ."</font>");
    return "error:Invalid process identifier $process";
       }
       return 'ok';
   }
   #   Validate a line in a configuration file edit script:
   #   Validation includes:
   #     - Ensuring the command is valid.
   #     - Ensuring the command has sufficient parameters
   #   Parameters:
   #     scriptline - A line to validate (\n has been stripped for what it's worth).
   #
   #   Return:
   #      0     - Invalid scriptline.
   #      1     - Valid scriptline
   #  NOTE:
   #     Only the command syntax is checked, not the executability of the
   #     command.
   #
   sub isValidEditCommand {
       my $scriptline = shift;
   
       #   Line elements are pipe separated:
   
       my ($command, $key, $newline)  = split(/\|/, $scriptline);
       &logthis('<font color="green"> isValideditCommand checking: '.
        "Command = '$command', Key = '$key', Newline = '$newline' </font>\n");
       
       if ($command eq "delete") {
    #
    #   key with no newline.
    #
    if( ($key eq "") || ($newline ne "")) {
       return 0; # Must have key but no newline.
    } else {
       return 1; # Valid syntax.
    }
       } elsif ($command eq "replace") {
    #
    #   key and newline:
    #
    if (($key eq "") || ($newline eq "")) {
       return 0;
    } else {
       return 1;
    }
       } elsif ($command eq "append") {
    if (($key ne "") && ($newline eq "")) {
       return 1;
    } else {
       return 0;
    }
       } else {
    return 0; # Invalid command.
       }
       return 0; # Should not get here!!!
   }
   #
   #   ApplyEdit - Applies an edit command to a line in a configuration 
   #               file.  It is the caller's responsiblity to validate the
   #               edit line.
   #   Parameters:
   #      $directive - A single edit directive to apply.  
   #                   Edit directives are of the form:
   #                  append|newline      - Appends a new line to the file.
   #                  replace|key|newline - Replaces the line with key value 'key'
   #                  delete|key          - Deletes the line with key value 'key'.
   #      $editor   - A config file editor object that contains the
   #                  file being edited.
   #
   sub ApplyEdit {
   
       my ($directive, $editor) = @_;
   
       # Break the directive down into its command and its parameters
       # (at most two at this point.  The meaning of the parameters, if in fact
       #  they exist depends on the command).
   
       my ($command, $p1, $p2) = split(/\|/, $directive);
   
       if($command eq "append") {
    $editor->Append($p1);          # p1 - key p2 null.
       } elsif ($command eq "replace") {
    $editor->ReplaceLine($p1, $p2);   # p1 - key p2 = newline.
       } elsif ($command eq "delete") {
    $editor->DeleteLine($p1);         # p1 - key p2 null.
       } else {          # Should not get here!!!
    die "Invalid command given to ApplyEdit $command"
       }
   }
   #
   # AdjustOurHost:
   #           Adjusts a host file stored in a configuration file editor object
   #           for the true IP address of this host. This is necessary for hosts
   #           that live behind a firewall.
   #           Those hosts have a publicly distributed IP of the firewall, but
   #           internally must use their actual IP.  We assume that a given
   #           host only has a single IP interface for now.
   # Formal Parameters:
   #     editor   - The configuration file editor to adjust.  This
   #                editor is assumed to contain a hosts.tab file.
   # Strategy:
   #    - Figure out our hostname.
   #    - Lookup the entry for this host.
   #    - Modify the line to contain our IP
   #    - Do a replace for this host.
   sub AdjustOurHost {
       my $editor        = shift;
   
       # figure out who I am.
   
       my $myHostName    = $perlvar{'lonHostID'}; # LonCAPA hostname.
   
       #  Get my host file entry.
   
       my $ConfigLine    = $editor->Find($myHostName);
       if(! (defined $ConfigLine)) {
    die "AdjustOurHost - no entry for me in hosts file $myHostName";
       }
       # figure out my IP:
       #   Use the config line to get my hostname.
       #   Use gethostbyname to translate that into an IP address.
       #
       my ($id,$domain,$role,$name,$ip,$maxcon,$idleto,$mincon) = split(/:/,$ConfigLine);
       my $BinaryIp = gethostbyname($name);
       my $ip       = inet_ntoa($ip);
       #
       #  Reassemble the config line from the elements in the list.
       #  Note that if the loncnew items were not present before, they will
       #  be now even if they would be empty
       #
       my $newConfigLine = $id;
       foreach my $item ($domain, $role, $name, $ip, $maxcon, $idleto, $mincon) {
    $newConfigLine .= ":".$item;
       }
       #  Replace the line:
   
       $editor->ReplaceLine($id, $newConfigLine);
       
   }
   #
   #   ReplaceConfigFile:
   #              Replaces a configuration file with the contents of a
   #              configuration file editor object.
   #              This is done by:
   #              - Copying the target file to <filename>.old
   #              - Writing the new file to <filename>.tmp
   #              - Moving <filename.tmp>  -> <filename>
   #              This laborious process ensures that the system is never without
   #              a configuration file that's at least valid (even if the contents
   #              may be dated).
   #   Parameters:
   #        filename   - Name of the file to modify... this is a full path.
   #        editor     - Editor containing the file.
   #
   sub ReplaceConfigFile {
       
       my ($filename, $editor) = @_;
   
       CopyFile ($filename, $filename.".old");
   
       my $contents  = $editor->Get(); # Get the contents of the file.
   
       InstallFile($filename, $contents);
   }
   #   
   #
   #   Called to edit a configuration table  file
   #   Parameters:
   #      request           - The entire command/request sent by lonc or lonManage
   #   Return:
   #      The reply to send to the client.
   #
   sub EditFile {
       my $request = shift;
   
       #  Split the command into it's pieces:  edit:filetype:script
   
       my ($request, $filetype, $script) = split(/:/, $request,3); # : in script
   
       #  Check the pre-coditions for success:
   
       if($request != "edit") { # Something is amiss afoot alack.
    return "error:edit request detected, but request != 'edit'\n";
       }
       if( ($filetype ne "hosts")  &&
    ($filetype ne "domain")) {
    return "error:edit requested with invalid file specifier: $filetype \n";
       }
   
       #   Split the edit script and check it's validity.
   
       my @scriptlines = split(/\n/, $script);  # one line per element.
       my $linecount   = scalar(@scriptlines);
       for(my $i = 0; $i < $linecount; $i++) {
    chomp($scriptlines[$i]);
    if(!isValidEditCommand($scriptlines[$i])) {
       return "error:edit with bad script line: '$scriptlines[$i]' \n";
    }
       }
   
       #   Execute the edit operation.
       #   - Create a config file editor for the appropriate file and 
       #   - execute each command in the script:
       #
       my $configfile = ConfigFileFromSelector($filetype);
       if (!(defined $configfile)) {
    return "refused\n";
       }
       my $editor = ConfigFileEdit->new($configfile);
   
       for (my $i = 0; $i < $linecount; $i++) {
    ApplyEdit($scriptlines[$i], $editor);
       }
       # If the file is the host file, ensure that our host is
       # adjusted to have our ip:
       #
       if($filetype eq "host") {
    AdjustOurHost($editor);
       }
       #  Finally replace the current file with our file.
       #
       ReplaceConfigFile($configfile, $editor);
   
       return "ok\n";
   }
   
   #---------------------------------------------------------------
   #
   # Manipulation of hash based databases (factoring out common code
   # for later use as we refactor.
 #  #
 #  Ties a domain level resource file to a hash.  #  Ties a domain level resource file to a hash.
 #  If requested a history entry is created in the associated hist file.  #  If requested a history entry is created in the associated hist file.
Line 178  sub isClient { Line 958  sub isClient {
 #    Reference to a hash bound to the db file or alternatively undef  #    Reference to a hash bound to the db file or alternatively undef
 #    if the tie failed.  #    if the tie failed.
 #  #
 sub TieDomainHash {  sub tie_domain_hash {
     my $domain    = shift;      my ($domain,$namespace,$how,$loghead,$logtail) = @_;
     my $namespace = shift;  
     my $how       = shift;  
           
     # Filter out any whitespace in the domain name:      # Filter out any whitespace in the domain name:
           
Line 189  sub TieDomainHash { Line 967  sub TieDomainHash {
           
     # We have enough to go on to tie the hash:      # We have enough to go on to tie the hash:
           
     my $UserTopDir   = $perlvar{'lonUsersDir'};      my $user_top_dir   = $perlvar{'lonUsersDir'};
     my $DomainDir    = $UserTopDir."/$domain";      my $domain_dir     = $user_top_dir."/$domain";
     my $ResourceFile = $DomainDir."/$namespace.db";      my $resource_file  = $domain_dir."/$namespace.db";
     my %hash;      my %hash;
     if(tie(%hash, 'GDBM_File', $ResourceFile, $how, 0640)) {      if(tie(%hash, 'GDBM_File', $resource_file, $how, 0640)) {
  if (scalar @_) { # Need to log the operation.   if (defined($loghead)) { # Need to log the operation.
     my $logFh = IO::File->new(">>$DomainDir/$namespace.hist");      my $logFh = IO::File->new(">>$domain_dir/$namespace.hist");
     if($logFh) {      if($logFh) {
  my $TimeStamp = time;   my $timestamp = time;
  my ($loghead, $logtail) = @_;   print $logFh "$loghead:$timestamp:$logtail\n";
  print $logFh "$loghead:$TimeStamp:$logtail\n";  
     }      }
       $logFh->close;
  }   }
  return \%hash; # Return the tied hash.   return \%hash; # Return the tied hash.
     }      } else {
     else {  
  return undef; # Tie failed.   return undef; # Tie failed.
     }      }
 }  }
Line 228  sub TieDomainHash { Line 1005  sub TieDomainHash {
 #   hash to which the database is tied.  It's up to the caller to untie.  #   hash to which the database is tied.  It's up to the caller to untie.
 #   undef if the has could not be tied.  #   undef if the has could not be tied.
 #  #
 sub TieUserHash {  sub tie_user_hash {
     my $domain      = shift;      my ($domain,$user,$namespace,$how,$loghead,$what) = @_;
     my $user        = shift;  
     my $namespace   = shift;  
     my $how         = shift;  
       
     $namespace=~s/\//\_/g; # / -> _      $namespace=~s/\//\_/g; # / -> _
     $namespace=~s/\W//g; # whitespace eliminated.      $namespace=~s/\W//g; # whitespace eliminated.
     my $proname     = propath($domain, $user);      my $proname     = propath($domain, $user);
         
     # If this is a namespace for which a history is kept,  
     # make the history log entry:  
       
       
     unless ($namespace =~/^nohist\_/ && (scalar @_ > 0)) {  
  my $hfh = IO::File->new(">>$proname/$namespace.hist");   
  if($hfh) {  
     my $now = time;  
     my $loghead  = shift;  
     my $what    = shift;  
     print $hfh "$loghead:$now:$what\n";  
  }  
     }  
     #  Tie the database.      #  Tie the database.
           
     my %hash;      my %hash;
     if(tie(%hash, 'GDBM_File', "$proname/$namespace.db",      if(tie(%hash, 'GDBM_File', "$proname/$namespace.db",
    $how, 0640)) {     $how, 0640)) {
    # If this is a namespace for which a history is kept,
    # make the history log entry:    
    if (($namespace !~/^nohist\_/) && (defined($loghead))) {
       my $args = scalar @_;
       Debug(" Opening history: $namespace $args");
       my $hfh = IO::File->new(">>$proname/$namespace.hist"); 
       if($hfh) {
    my $now = time;
    print $hfh "$loghead:$now:$what\n";
       }
       $hfh->close;
    }
  return \%hash;   return \%hash;
     }      } else {
     else {  
  return undef;   return undef;
     }      }
           
 }  }
   
   #   read_profile
 #  #
 #   Get a Request:  #   Returns a set of specific entries from a user's profile file.
 #   Gets a Request message from the client.  The transaction  #   this is a utility function that is used by both get_profile_entry and
 #   is defined as a 'line' of text.  We remove the new line  #   get_profile_entry_encrypted.
 #   from the text line.    
 #     
 sub GetRequest {  
     my $input = <$client>;  
     chomp($input);  
   
     Debug("Request = $input\n");  
   
     &status('Processing '.$clientname.':'.$input);  
   
     return $input;  
 }  
 #  #
 #   Decipher encoded traffic  # Parameters:
 #  Parameters:  #    udom       - Domain in which the user exists.
 #     input      - Encoded data.  #    uname      - User's account name (loncapa account)
 #  Returns:  #    namespace  - The profile namespace to open.
 #     Decoded data or undef if encryption key was not yet negotiated.  #    what       - A set of & separated queries.
 #  Implicit input:  # Returns:
 #     cipher  - This global holds the negotiated encryption key.  #    If all ok: - The string that needs to be shipped back to the user.
   #    If failure - A string that starts with error: followed by the failure
   #                 reason.. note that this probabyl gets shipped back to the
   #                 user as well.
 #  #
 sub Decipher {  sub read_profile {
     my $input  = shift;      my ($udom, $uname, $namespace, $what) = @_;
     my $output = '';      
          my $hashref = &tie_user_hash($udom, $uname, $namespace,
       &GDBM_READER());
     if($cipher) {      if ($hashref) {
  my($enc, $enclength, $encinput) = split(/:/, $input);          my @queries=split(/\&/,$what);
  for(my $encidx = 0; $encidx < length($encinput); $encidx += 16) {          my $qresult='';
     $output .=   
  $cipher->decrypt(pack("H16", substr($encinput, $encidx, 16)));   for (my $i=0;$i<=$#queries;$i++) {
       $qresult.="$hashref->{$queries[$i]}&";    # Presumably failure gives empty string.
    }
    $qresult=~s/\&$//;              # Remove trailing & from last lookup.
    if (untie %$hashref) {
       return $qresult;
    } else {
       return "error: ".($!+0)." untie (GDBM) Failed";
  }   }
  return substr($output, 0, $enclength);  
     } else {      } else {
  return undef;   if ($!+0 == 2) {
       return "error:No such file or GDBM reported bad block error";
    } else {
       return "error: ".($!+0)." tie (GDBM) Failed";
    }
     }      }
 }  
   
 #  
 #   Register a command processor.  This function is invoked to register a sub  
 #   to process a request.  Once registered, the ProcessRequest sub can automatically  
 #   dispatch requests to an appropriate sub, and do the top level validity checking  
 #   as well:  
 #    - Is the keyword recognized.  
 #    - Is the proper client type attempting the request.  
 #    - Is the request encrypted if it has to be.  
 #   Parameters:  
 #    $RequestName         - Name of the request being registered.  
 #                           This is the command request that will match  
 #                           against the hash keywords to lookup the information  
 #                           associated with the dispatch information.  
 #    $Procedure           - Reference to a sub to call to process the request.  
 #                           All subs get called as follows:  
 #                             Procedure($cmd, $tail, $replyfd, $key)  
 #                             $cmd    - the actual keyword that invoked us.  
 #                             $tail   - the tail of the request that invoked us.  
 #                             $replyfd- File descriptor connected to the client  
 #    $MustEncode          - True if the request must be encoded to be good.  
 #    $ClientOk            - True if it's ok for a client to request this.  
 #    $ManagerOk           - True if it's ok for a manager to request this.  
 # Side effects:  
 #      - On success, the Dispatcher hash has an entry added for the key $RequestName  
 #      - On failure, the program will die as it's a bad internal bug to try to   
 #        register a duplicate command handler.  
 #  
 sub RegisterHandler {  
     my $RequestName    = shift;  
     my $Procedure      = shift;  
     my $MustEncode     = shift;  
     my $ClientOk       = shift;  
     my $ManagerOk      = shift;  
      
     #  Don't allow duplication#  
      
     if (defined $Dispatcher{$RequestName}) {  
  die "Attempting to define a duplicate request handler for $RequestName\n";  
     }  
     #   Build the client type mask:  
       
     my $ClientTypeMask = 0;  
     if($ClientOk) {  
  $ClientTypeMask  |= $CLIENT_OK;  
     }  
     if($ManagerOk) {  
  $ClientTypeMask  |= $MANAGER_OK;  
     }  
      
     #  Enter the hash:  
         
     my @entry = ($Procedure, $MustEncode, $ClientTypeMask);  
      
     $Dispatcher{$RequestName} = \@entry;  
      
      
 }  }
   
 #--------------------- Request Handlers --------------------------------------------  #--------------------- Request Handlers --------------------------------------------
 #  #
 #   By convention each request handler registers itself prior to the sub declaration:  #   By convention each request handler registers itself prior to the sub 
   #   declaration:
 #  #
   
   #++
   #
 #  Handles ping requests.  #  Handles ping requests.
 #  Parameters:  #  Parameters:
 #      $cmd    - the actual keyword that invoked us.  #      $cmd    - the actual keyword that invoked us.
Line 382  sub RegisterHandler { Line 1101  sub RegisterHandler {
 #      0       - Program should exit.  #      0       - Program should exit.
 #  Side effects:  #  Side effects:
 #      Reply information is sent to the client.  #      Reply information is sent to the client.
   sub ping_handler {
 sub PingHandler {      my ($cmd, $tail, $client) = @_;
     my $cmd    = shift;      Debug("$cmd $tail $client .. $currenthostid:");
     my $tail   = shift;  
     my $client = shift;  
         
     Reply( $client,"$currenthostid\n","$cmd:$tail");      Reply( $client,"$currenthostid\n","$cmd:$tail");
         
     return 1;      return 1;
 }  }
 RegisterHandler("ping", \&PingHandler, 0, 1, 1);       # Ping unencoded, client or manager.  &register_handler("ping", \&ping_handler, 0, 1, 1);       # Ping unencoded, client or manager.
   
   #++
   #
   # Handles pong requests.  Pong replies with our current host id, and
   #                         the results of a ping sent to us via our lonc.
 #  #
 # Handles pong reequests:  
 # Parameters:  # Parameters:
 #      $cmd    - the actual keyword that invoked us.  #      $cmd    - the actual keyword that invoked us.
 #      $tail   - the tail of the request that invoked us.  #      $tail   - the tail of the request that invoked us.
Line 407  RegisterHandler("ping", \&PingHandler, 0 Line 1128  RegisterHandler("ping", \&PingHandler, 0
 #      0       - Program should exit.  #      0       - Program should exit.
 #  Side effects:  #  Side effects:
 #      Reply information is sent to the client.  #      Reply information is sent to the client.
   sub pong_handler {
 sub PongHandler {      my ($cmd, $tail, $replyfd) = @_;
     my $cmd     = shift;  
     my $tail    = shift;  
     my $replyfd = shift;  
   
     my $reply=&reply("ping",$clientname);      my $reply=&reply("ping",$clientname);
     Reply( $replyfd, "$currenthostid:$reply\n", "$cmd:$tail");       &Reply( $replyfd, "$currenthostid:$reply\n", "$cmd:$tail"); 
     return 1;      return 1;
 }  }
 RegisterHandler("pong", \&PongHandler, 0, 1, 1);       # Pong unencoded, client or manager  &register_handler("pong", \&pong_handler, 0, 1, 1);       # Pong unencoded, client or manager
   
 #  #++
 #   EstablishKeyHandler:  
 #      Called to establish an encrypted session key with the remote client.  #      Called to establish an encrypted session key with the remote client.
 #  #      Note that with secure lond, in most cases this function is never
   #      invoked.  Instead, the secure session key is established either
   #      via a local file that's locked down tight and only lives for a short
   #      time, or via an ssl tunnel...and is generated from a bunch-o-random
   #      bits from /dev/urandom, rather than the predictable pattern used by
   #      by this sub.  This sub is only used in the old-style insecure
   #      key negotiation.
 # Parameters:  # Parameters:
 #      $cmd    - the actual keyword that invoked us.  #      $cmd    - the actual keyword that invoked us.
 #      $tail   - the tail of the request that invoked us.  #      $tail   - the tail of the request that invoked us.
Line 438  RegisterHandler("pong", \&PongHandler, 0 Line 1161  RegisterHandler("pong", \&PongHandler, 0
 #      Reply information is sent to the client.  #      Reply information is sent to the client.
 #      $cipher is set with a reference to a new IDEA encryption object.  #      $cipher is set with a reference to a new IDEA encryption object.
 #  #
 sub EstablishKeyHandler {  sub establish_key_handler {
     my $cmd      = shift;      my ($cmd, $tail, $replyfd) = @_;
     my $tail     = shift;  
     my $replyfd  = shift;  
   
     my $buildkey=time.$$.int(rand 100000);      my $buildkey=time.$$.int(rand 100000);
     $buildkey=~tr/1-6/A-F/;      $buildkey=~tr/1-6/A-F/;
Line 454  sub EstablishKeyHandler { Line 1175  sub EstablishKeyHandler {
     $key=substr($key,0,32);      $key=substr($key,0,32);
     my $cipherkey=pack("H32",$key);      my $cipherkey=pack("H32",$key);
     $cipher=new IDEA $cipherkey;      $cipher=new IDEA $cipherkey;
     Reply($replyfd, "$buildkey\n", "$cmd:$tail");       &Reply($replyfd, "$buildkey\n", "$cmd:$tail"); 
         
     return 1;      return 1;
   
 }  }
 RegisterHandler("ekey", \&EstablishKeyHandler, 0, 1,1);  &register_handler("ekey", \&establish_key_handler, 0, 1,1);
   
 #  LoadHandler:  
 #     Handler for the load command.  Returns the current system load average  #     Handler for the load command.  Returns the current system load average
 #     to the requestor.  #     to the requestor.
 #  #
Line 478  RegisterHandler("ekey", \&EstablishKeyHa Line 1198  RegisterHandler("ekey", \&EstablishKeyHa
 #      0       - Program should exit.  #      0       - Program should exit.
 #  Side effects:  #  Side effects:
 #      Reply information is sent to the client.  #      Reply information is sent to the client.
 sub LoadHandler {  sub load_handler {
     my $cmd     = shift;      my ($cmd, $tail, $replyfd) = @_;
     my $tail    = shift;  
     my $replyfd = shift;  
   
    # Get the load average from /proc/loadavg and calculate it as a percentage of     # Get the load average from /proc/loadavg and calculate it as a percentage of
    # the allowed load limit as set by the perl global variable lonLoadLim     # the allowed load limit as set by the perl global variable lonLoadLim
Line 494  sub LoadHandler { Line 1212  sub LoadHandler {
         
     my $loadpercent=100*$loadavg/$perlvar{'lonLoadLim'};      my $loadpercent=100*$loadavg/$perlvar{'lonLoadLim'};
   
     Reply( $replyfd, "$loadpercent\n", "$cmd:$tail");      &Reply( $replyfd, "$loadpercent\n", "$cmd:$tail");
         
     return 1;      return 1;
 }  }
 RegisterHandler("load", \&LoadHandler, 0, 1, 0);  &register_handler("load", \&load_handler, 0, 1, 0);
   
   
 #  #
 #   Process the userload request.  This sub returns to the client the current  #   Process the userload request.  This sub returns to the client the current
Line 521  RegisterHandler("load", \&LoadHandler, 0 Line 1238  RegisterHandler("load", \&LoadHandler, 0
 #  Implicit outputs:  #  Implicit outputs:
 #     the reply is written to the client.  #     the reply is written to the client.
 #  #
 sub UserLoadHandler {  sub user_load_handler {
     my $cmd     = shift;      my ($cmd, $tail, $replyfd) = @_;
     my $tail    = shift;  
     my $replyfd = shift;  
   
     my $userloadpercent=&userload();      my $userloadpercent=&userload();
     Reply($replyfd, "$userloadpercent\n", "$cmd:$tail");      &Reply($replyfd, "$userloadpercent\n", "$cmd:$tail");
           
     return 1;      return 1;
 }  }
 RegisterHandler("userload", \&UserLoadHandler, 0, 1, 0);  &register_handler("userload", \&user_load_handler, 0, 1, 0);
   
 #   Process a request for the authorization type of a user:  #   Process a request for the authorization type of a user:
 #   (userauth).  #   (userauth).
Line 546  RegisterHandler("userload", \&UserLoadHa Line 1261  RegisterHandler("userload", \&UserLoadHa
 # Implicit outputs:  # Implicit outputs:
 #    The user authorization type is written to the client.  #    The user authorization type is written to the client.
 #  #
 sub UserAuthorizationType {  sub user_authorization_type {
     my $cmd     = shift;      my ($cmd, $tail, $replyfd) = @_;
     my $tail    = shift;  
     my $replyfd = shift;  
         
     my $userinput = "$cmd:$tail";      my $userinput = "$cmd:$tail";
         
     #  Pull the domain and username out of the command tail.      #  Pull the domain and username out of the command tail.
     # and call GetAuthType to determine the authentication type.      # and call get_auth_type to determine the authentication type.
         
     my ($udom,$uname)=split(/:/,$tail);      my ($udom,$uname)=split(/:/,$tail);
     my $result = GetAuthType($udom, $uname);      my $result = &get_auth_type($udom, $uname);
     if($result eq "nouser") {      if($result eq "nouser") {
  Failure( $replyfd, "unknown_user\n", $userinput);   &Failure( $replyfd, "unknown_user\n", $userinput);
     } else {      } else {
  #   #
  # We only want to pass the second field from GetAuthType   # We only want to pass the second field from get_auth_type
  # for ^krb.. otherwise we'll be handing out the encrypted   # for ^krb.. otherwise we'll be handing out the encrypted
  # password for internals e.g.   # password for internals e.g.
  #   #
  my ($type,$otherinfo) = split(/:/,$result);   my ($type,$otherinfo) = split(/:/,$result);
  if($type =~ /^krb/) {   if($type =~ /^krb/) {
     $type = $result;      $type = $result;
  }   } else {
  Reply( $replyfd, "$type\n", $userinput);              $type .= ':';
           }
    &Reply( $replyfd, "$type\n", $userinput);
     }      }
       
     return 1;      return 1;
 }  }
 RegisterHandler("currentauth", \&UserAuthorizationType, 1, 1, 0);  &register_handler("currentauth", \&user_authorization_type, 1, 1, 0);
 #  
 #   Process a request by a manager to push a hosts or domain table   #   Process a request by a manager to push a hosts or domain table 
 #   to us.  We pick apart the command and pass it on to the subs  #   to us.  We pick apart the command and pass it on to the subs
 #   that already exist to do this.  #   that already exist to do this.
Line 590  RegisterHandler("currentauth", \&UserAut Line 1305  RegisterHandler("currentauth", \&UserAut
 #      0       - Program should exit  #      0       - Program should exit
 # Implicit Output:  # Implicit Output:
 #    a reply is written to the client.  #    a reply is written to the client.
   sub push_file_handler {
 sub PushFileHandler {      my ($cmd, $tail, $client) = @_;
     my $cmd    = shift;  
     my $tail   = shift;  
     my $client = shift;  
   
     my $userinput = "$cmd:$tail";      my $userinput = "$cmd:$tail";
   
Line 602  sub PushFileHandler { Line 1314  sub PushFileHandler {
     # the code below is a hook to do further authentication (e.g. to resolve      # the code below is a hook to do further authentication (e.g. to resolve
     # spoofing).      # spoofing).
   
     my $cert = GetCertificate($userinput);      my $cert = &GetCertificate($userinput);
     if(ValidManager($cert)) {       if(&ValidManager($cert)) { 
   
  # Now presumably we have the bona fides of both the peer host and the   # Now presumably we have the bona fides of both the peer host and the
  # process making the request.   # process making the request.
               
  my $reply = PushFile($userinput);   my $reply = &PushFile($userinput);
  Reply($client, "$reply\n", $userinput);   &Reply($client, "$reply\n", $userinput);
   
     } else {      } else {
  Failure( $client, "refused\n", $userinput);   &Failure( $client, "refused\n", $userinput);
     }       } 
       return 1;
   }
   &register_handler("pushfile", \&push_file_handler, 1, 0, 1);
   
   #
   #   du  - list the disk usuage of a directory recursively. 
   #    
   #   note: stolen code from the ls file handler
   #   under construction by Rick Banghart 
   #    .
   # Parameters:
   #    $cmd        - The command that dispatched us (du).
   #    $ududir     - The directory path to list... I'm not sure what this
   #                  is relative as things like ls:. return e.g.
   #                  no_such_dir.
   #    $client     - Socket open on the client.
   # Returns:
   #     1 - indicating that the daemon should not disconnect.
   # Side Effects:
   #   The reply is written to  $client.
   #
   sub du_handler {
       my ($cmd, $ududir, $client) = @_;
       my ($ududir) = split(/:/,$ududir); # Make 'telnet' testing easier.
       my $userinput = "$cmd:$ududir";
   
       if ($ududir=~/\.\./ || $ududir!~m|^/home/httpd/|) {
    &Failure($client,"refused\n","$cmd:$ududir");
    return 1;
       }
       #  Since $ududir could have some nasties in it,
       #  we will require that ududir is a valid
       #  directory.  Just in case someone tries to
       #  slip us a  line like .;(cd /home/httpd rm -rf*)
       #  etc.
       #
       if (-d $ududir) {
    #  And as Shakespeare would say to make
    #  assurance double sure, 
    # use execute_command to ensure that the command is not executed in
    # a shell that can screw us up.
   
    my $duout = execute_command("du -ks $ududir");
    $duout=~s/[^\d]//g; #preserve only the numbers
    &Reply($client,"$duout\n","$cmd:$ududir");
       } else {
   
    &Failure($client, "bad_directory:$ududir\n","$cmd:$ududir"); 
   
       }
       return 1;
   }
   &register_handler("du", \&du_handler, 0, 1, 0);
   
   #
   # The ls_handler routine should be considered obosolete and is retained
   # for communication with legacy servers.  Please see the ls2_handler.
   #
   #   ls  - list the contents of a directory.  For each file in the
   #    selected directory the filename followed by the full output of
   #    the stat function is returned.  The returned info for each
   #    file are separated by ':'.  The stat fields are separated by &'s.
   # Parameters:
   #    $cmd        - The command that dispatched us (ls).
   #    $ulsdir     - The directory path to list... I'm not sure what this
   #                  is relative as things like ls:. return e.g.
   #                  no_such_dir.
   #    $client     - Socket open on the client.
   # Returns:
   #     1 - indicating that the daemon should not disconnect.
   # Side Effects:
   #   The reply is written to  $client.
   #
   sub ls_handler {
       # obsoleted by ls2_handler
       my ($cmd, $ulsdir, $client) = @_;
   
       my $userinput = "$cmd:$ulsdir";
   
       my $obs;
       my $rights;
       my $ulsout='';
       my $ulsfn;
       if (-e $ulsdir) {
    if(-d $ulsdir) {
       if (opendir(LSDIR,$ulsdir)) {
    while ($ulsfn=readdir(LSDIR)) {
       undef $obs, $rights; 
       my @ulsstats=stat($ulsdir.'/'.$ulsfn);
       #We do some obsolete checking here
       if(-e $ulsdir.'/'.$ulsfn.".meta") { 
    open(FILE, $ulsdir.'/'.$ulsfn.".meta");
    my @obsolete=<FILE>;
    foreach my $obsolete (@obsolete) {
       if($obsolete =~ m|(<obsolete>)(on)|) { $obs = 1; } 
       if($obsolete =~ m|(<copyright>)(default)|) { $rights = 1; }
    }
       }
       $ulsout.=$ulsfn.'&'.join('&',@ulsstats);
       if($obs eq '1') { $ulsout.="&1"; }
       else { $ulsout.="&0"; }
       if($rights eq '1') { $ulsout.="&1:"; }
       else { $ulsout.="&0:"; }
    }
    closedir(LSDIR);
       }
    } else {
       my @ulsstats=stat($ulsdir);
       $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':';
    }
       } else {
    $ulsout='no_such_dir';
       }
       if ($ulsout eq '') { $ulsout='empty'; }
       &Reply($client, "$ulsout\n", $userinput); # This supports debug logging.
       
       return 1;
   
 }  }
 RegisterHandler("pushfile", \&PushFileHandler, 1, 0, 1);  &register_handler("ls", \&ls_handler, 0, 1, 0);
   
   #
   # Please also see the ls_handler, which this routine obosolets.
   # ls2_handler differs from ls_handler in that it escapes its return 
   # values before concatenating them together with ':'s.
   #
   #   ls2  - list the contents of a directory.  For each file in the
   #    selected directory the filename followed by the full output of
   #    the stat function is returned.  The returned info for each
   #    file are separated by ':'.  The stat fields are separated by &'s.
   # Parameters:
   #    $cmd        - The command that dispatched us (ls).
   #    $ulsdir     - The directory path to list... I'm not sure what this
   #                  is relative as things like ls:. return e.g.
   #                  no_such_dir.
   #    $client     - Socket open on the client.
   # Returns:
   #     1 - indicating that the daemon should not disconnect.
   # Side Effects:
   #   The reply is written to  $client.
   #
   sub ls2_handler {
       my ($cmd, $ulsdir, $client) = @_;
   
       my $userinput = "$cmd:$ulsdir";
   
       my $obs;
       my $rights;
       my $ulsout='';
       my $ulsfn;
       if (-e $ulsdir) {
           if(-d $ulsdir) {
               if (opendir(LSDIR,$ulsdir)) {
                   while ($ulsfn=readdir(LSDIR)) {
                       undef $obs, $rights; 
                       my @ulsstats=stat($ulsdir.'/'.$ulsfn);
                       #We do some obsolete checking here
                       if(-e $ulsdir.'/'.$ulsfn.".meta") { 
                           open(FILE, $ulsdir.'/'.$ulsfn.".meta");
                           my @obsolete=<FILE>;
                           foreach my $obsolete (@obsolete) {
                               if($obsolete =~ m|(<obsolete>)(on)|) { $obs = 1; } 
                               if($obsolete =~ m|(<copyright>)(default)|) {
                                   $rights = 1;
                               }
                           }
                       }
                       my $tmp = $ulsfn.'&'.join('&',@ulsstats);
                       if ($obs    eq '1') { $tmp.="&1"; } else { $tmp.="&0"; }
                       if ($rights eq '1') { $tmp.="&1"; } else { $tmp.="&0"; }
                       $ulsout.= &escape($tmp).':';
                   }
                   closedir(LSDIR);
               }
           } else {
               my @ulsstats=stat($ulsdir);
               $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':';
           }
       } else {
           $ulsout='no_such_dir';
      }
      if ($ulsout eq '') { $ulsout='empty'; }
      &Reply($client, "$ulsout\n", $userinput); # This supports debug logging.
      return 1;
   }
   &register_handler("ls2", \&ls2_handler, 0, 1, 0);
   
 #   Process a reinit request.  Reinit requests that either  #   Process a reinit request.  Reinit requests that either
 #   lonc or lond be reinitialized so that an updated   #   lonc or lond be reinitialized so that an updated 
Line 633  RegisterHandler("pushfile", \&PushFileHa Line 1527  RegisterHandler("pushfile", \&PushFileHa
 #  Implicit output:  #  Implicit output:
 #     a reply is sent to the client.  #     a reply is sent to the client.
 #  #
 sub ReinitProcessHandler {  sub reinit_process_handler {
     my $cmd    = shift;      my ($cmd, $tail, $client) = @_;
     my $tail   = shift;  
     my $client = shift;  
         
     my $userinput = "$cmd:$tail";      my $userinput = "$cmd:$tail";
         
     my $cert = GetCertificate($userinput);      my $cert = &GetCertificate($userinput);
     if(ValidManager($cert)) {      if(&ValidManager($cert)) {
  chomp($userinput);   chomp($userinput);
  my $reply = ReinitProcess($userinput);   my $reply = &ReinitProcess($userinput);
  Reply( $client,  "$reply\n", $userinput);   &Reply( $client,  "$reply\n", $userinput);
     } else {      } else {
  Failure( $client, "refused\n", $userinput);   &Failure( $client, "refused\n", $userinput);
     }      }
     return 1;      return 1;
 }  }
   &register_handler("reinit", \&reinit_process_handler, 1, 0, 1);
 RegisterHandler("reinit", \&ReinitProcessHandler, 1, 0, 1);  
   
 #  Process the editing script for a table edit operation.  #  Process the editing script for a table edit operation.
 #  the editing operation must be encrypted and requested by  #  the editing operation must be encrypted and requested by
Line 667  RegisterHandler("reinit", \&ReinitProces Line 1558  RegisterHandler("reinit", \&ReinitProces
 #  Implicit output:  #  Implicit output:
 #     a reply is sent to the client.  #     a reply is sent to the client.
 #  #
 sub EditTableHandler {  sub edit_table_handler {
     my $command    = shift;      my ($command, $tail, $client) = @_;
     my $tail       = shift;  
     my $client     = shift;  
         
     my $userinput = "$command:$tail";      my $userinput = "$command:$tail";
   
     my $cert = GetCertificate($userinput);      my $cert = &GetCertificate($userinput);
     if(ValidManager($cert)) {      if(&ValidManager($cert)) {
  my($filetype, $script) = split(/:/, $tail);   my($filetype, $script) = split(/:/, $tail);
  if (($filetype eq "hosts") ||    if (($filetype eq "hosts") || 
     ($filetype eq "domain")) {      ($filetype eq "domain")) {
     if($script ne "") {      if($script ne "") {
  Reply($client,              # BUGBUG - EditFile   &Reply($client,              # BUGBUG - EditFile
       EditFile($userinput), #   could fail.        &EditFile($userinput), #   could fail.
       $userinput);        $userinput);
     } else {      } else {
  Failure($client,"refused\n",$userinput);   &Failure($client,"refused\n",$userinput);
     }      }
  } else {   } else {
     Failure($client,"refused\n",$userinput);      &Failure($client,"refused\n",$userinput);
  }   }
     } else {      } else {
  Failure($client,"refused\n",$userinput);   &Failure($client,"refused\n",$userinput);
     }      }
     return 1;      return 1;
 }  }
 RegisterHandler("edit", \&EditTableHandler, 1, 0, 1);  &register_handler("edit", \&edit_table_handler, 1, 0, 1);
   
   
 #  #
 #   Authenticate a user against the LonCAPA authentication  #   Authenticate a user against the LonCAPA authentication
Line 721  RegisterHandler("edit", \&EditTableHandl Line 1609  RegisterHandler("edit", \&EditTableHandl
 #    The authentication systems describe above have their own forms of implicit  #    The authentication systems describe above have their own forms of implicit
 #    input into the authentication process that are described above.  #    input into the authentication process that are described above.
 #  #
 sub AuthenticateHandler {  sub authenticate_handler {
     my $cmd        = shift;      my ($cmd, $tail, $client) = @_;
     my $tail       = shift;  
     my $client     = shift;  
           
     #  Regenerate the full input line       #  Regenerate the full input line 
           
Line 735  sub AuthenticateHandler { Line 1622  sub AuthenticateHandler {
     #  upass   - User's password.      #  upass   - User's password.
           
     my ($udom,$uname,$upass)=split(/:/,$tail);      my ($udom,$uname,$upass)=split(/:/,$tail);
     Debug(" Authenticate domain = $udom, user = $uname, password = $upass");      &Debug(" Authenticate domain = $udom, user = $uname, password = $upass");
     chomp($upass);      chomp($upass);
     $upass=unescape($upass);      $upass=&unescape($upass);
   
     my $pwdcorrect = ValidateUser($udom, $uname, $upass);      my $pwdcorrect = &validate_user($udom, $uname, $upass);
     if($pwdcorrect) {      if($pwdcorrect) {
  Reply( $client, "authorized\n", $userinput);   &Reply( $client, "authorized\n", $userinput);
  #   #
  #  Bad credentials: Failed to authorize   #  Bad credentials: Failed to authorize
  #   #
     } else {      } else {
  Failure( $client, "non_authorized\n", $userinput);   &Failure( $client, "non_authorized\n", $userinput);
     }      }
   
     return 1;      return 1;
 }  }
 RegisterHandler("auth", \&AuthenticateHandler, 1, 1, 0);  &register_handler("auth", \&authenticate_handler, 1, 1, 0);
   
 #  #
 #   Change a user's password.  Note that this function is complicated by  #   Change a user's password.  Note that this function is complicated by
Line 774  RegisterHandler("auth", \&AuthenticateHa Line 1661  RegisterHandler("auth", \&AuthenticateHa
 # Implicit inputs:  # Implicit inputs:
 #    The authentication systems describe above have their own forms of implicit  #    The authentication systems describe above have their own forms of implicit
 #    input into the authentication process that are described above.  #    input into the authentication process that are described above.
 sub ChangePasswordHandler {  sub change_password_handler {
     my $cmd     = shift;      my ($cmd, $tail, $client) = @_;
     my $tail    = shift;  
     my $client  = shift;  
      
     my $userinput = $cmd.":".$tail;           # Reconstruct client's string.      my $userinput = $cmd.":".$tail;           # Reconstruct client's string.
   
     #      #
Line 788  sub ChangePasswordHandler { Line 1673  sub ChangePasswordHandler {
     #  npass - New password.      #  npass - New password.
         
     my ($udom,$uname,$upass,$npass)=split(/:/,$tail);      my ($udom,$uname,$upass,$npass)=split(/:/,$tail);
     chomp($npass);  
     $upass=&unescape($upass);      $upass=&unescape($upass);
     $npass=&unescape($npass);      $npass=&unescape($npass);
     &Debug("Trying to change password for $uname");      &Debug("Trying to change password for $uname");
Line 796  sub ChangePasswordHandler { Line 1681  sub ChangePasswordHandler {
     # First require that the user can be authenticated with their      # First require that the user can be authenticated with their
     # old password:      # old password:
   
     my $validated = ValidateUser($udom, $uname, $upass);      my $validated = &validate_user($udom, $uname, $upass);
     if($validated) {      if($validated) {
  my $realpasswd  = GetAuthType($udom, $uname); # Defined since authd.   my $realpasswd  = &get_auth_type($udom, $uname); # Defined since authd.
   
  my ($howpwd,$contentpwd)=split(/:/,$realpasswd);   my ($howpwd,$contentpwd)=split(/:/,$realpasswd);
  if ($howpwd eq 'internal') {   if ($howpwd eq 'internal') {
Line 806  sub ChangePasswordHandler { Line 1691  sub ChangePasswordHandler {
     my $salt=time;      my $salt=time;
     $salt=substr($salt,6,2);      $salt=substr($salt,6,2);
     my $ncpass=crypt($npass,$salt);      my $ncpass=crypt($npass,$salt);
     if(RewritePwFile($udom, $uname, "internal:$ncpass")) {      if(&rewrite_password_file($udom, $uname, "internal:$ncpass")) {
  &logthis("Result of password change for "   &logthis("Result of password change for "
  ."$uname: pwchange_success");   ."$uname: pwchange_success");
  Reply($client, "ok\n", $userinput);   &Reply($client, "ok\n", $userinput);
     } else {      } else {
  &logthis("Unable to open $uname passwd "                  &logthis("Unable to open $uname passwd "               
  ."to change password");   ."to change password");
  Failure( $client, "non_authorized\n",$userinput);   &Failure( $client, "non_authorized\n",$userinput);
     }      }
  } elsif ($howpwd eq 'unix') {   } elsif ($howpwd eq 'unix') {
     # Unix means we have to access /etc/password      my $result = &change_unix_password($uname, $npass);
     &Debug("auth is unix");  
     my $execdir=$perlvar{'lonDaemons'};  
     &Debug("Opening lcpasswd pipeline");  
     my $pf = IO::File->new("|$execdir/lcpasswd > "  
    ."$perlvar{'lonDaemons'}"  
    ."/logs/lcpasswd.log");  
     print $pf "$uname\n$npass\n$npass\n";  
     close $pf;  
     my $err = $?;  
     my $result = ($err>0 ? 'pwchange_failure' : 'ok');  
     &logthis("Result of password change for $uname: ".      &logthis("Result of password change for $uname: ".
      &lcpasswdstrerror($?));       $result);
     Reply($client, "$result\n", $userinput);      &Reply($client, "$result\n", $userinput);
  } else {   } else {
     # this just means that the current password mode is not      # this just means that the current password mode is not
     # one we know how to change (e.g the kerberos auth modes or      # one we know how to change (e.g the kerberos auth modes or
     # locally written auth handler).      # locally written auth handler).
     #      #
     Reply( $client, "auth_mode_error\n", $userinput);      &Failure( $client, "auth_mode_error\n", $userinput);
  }     }  
   
     }      } else {
     else {   &Failure( $client, "non_authorized\n", $userinput);
  Reply( $client, "non_authorized\n", $userinput);  
     }      }
   
     return 1;      return 1;
 }  }
 RegisterHandler("passwd", \&ChangePasswordHandler, 1, 1, 0);  &register_handler("passwd", \&change_password_handler, 1, 1, 0);
   
 #  #
 #   Create a new user.  User in this case means a lon-capa user.  #   Create a new user.  User in this case means a lon-capa user.
Line 863  RegisterHandler("passwd", \&ChangePasswo Line 1737  RegisterHandler("passwd", \&ChangePasswo
 # Implicit inputs:  # Implicit inputs:
 #    The authentication systems describe above have their own forms of implicit  #    The authentication systems describe above have their own forms of implicit
 #    input into the authentication process that are described above.  #    input into the authentication process that are described above.
 sub AddUserHandler {  sub add_user_handler {
     my $cmd     = shift;  
     my $tail    = shift;      my ($cmd, $tail, $client) = @_;
     my $client  = shift;  
   
     my ($udom,$uname,$umode,$npass)=split(/:/,$tail);      my ($udom,$uname,$umode,$npass)=split(/:/,$tail);
     my $userinput = $cmd.":".$tail; # Reconstruct the full request line.      my $userinput = $cmd.":".$tail; # Reconstruct the full request line.
Line 879  sub AddUserHandler { Line 1753  sub AddUserHandler {
  my $oldumask=umask(0077);   my $oldumask=umask(0077);
  chomp($npass);   chomp($npass);
  $npass=&unescape($npass);   $npass=&unescape($npass);
  my $passfilename  = PasswordPath($udom, $uname);   my $passfilename  = &password_path($udom, $uname);
  &Debug("Password file created will be:".$passfilename);   &Debug("Password file created will be:".$passfilename);
  if (-e $passfilename) {   if (-e $passfilename) {
     Failure( $client, "already_exists\n", $userinput);      &Failure( $client, "already_exists\n", $userinput);
  } else {   } else {
     my @fpparts=split(/\//,$passfilename);  
     my $fpnow=$fpparts[0].'/'.$fpparts[1].'/'.$fpparts[2];  
     my $fperror='';      my $fperror='';
     for (my $i=3;$i<= ($#fpparts-1);$i++) {      if (!&mkpath($passfilename)) {
  $fpnow.='/'.$fpparts[$i];    $fperror="error: ".($!+0)." mkdir failed while attempting "
  unless (-e $fpnow) {      ."makeuser";
     &logthis("mkdir $fpnow");  
     unless (mkdir($fpnow,0777)) {  
  $fperror="error: ".($!+0)." mkdir failed while attempting "  
     ."makeuser";  
     }  
  }  
     }      }
     unless ($fperror) {      unless ($fperror) {
  my $result=&make_passwd_file($uname, $umode,$npass, $passfilename);   my $result=&make_passwd_file($uname, $umode,$npass, $passfilename);
  Reply($client, $result, $userinput);     #BUGBUG - could be fail   &Reply($client, $result, $userinput);     #BUGBUG - could be fail
     } else {      } else {
  Failure($client, "$fperror\n", $userinput);   &Failure($client, "$fperror\n", $userinput);
     }      }
  }   }
  umask($oldumask);   umask($oldumask);
     }  else {      }  else {
  Failure($client, "not_right_domain\n",   &Failure($client, "not_right_domain\n",
  $userinput); # Even if we are multihomed.   $userinput); # Even if we are multihomed.
           
     }      }
     return 1;      return 1;
   
 }  }
 RegisterHandler("makeuser", \&AddUserHandler, 1, 1, 0);  &register_handler("makeuser", \&add_user_handler, 1, 1, 0);
   
 #  #
 #   Change the authentication method of a user.  Note that this may  #   Change the authentication method of a user.  Note that this may
Line 936  RegisterHandler("makeuser", \&AddUserHan Line 1802  RegisterHandler("makeuser", \&AddUserHan
 # Implicit inputs:  # Implicit inputs:
 #    The authentication systems describe above have their own forms of implicit  #    The authentication systems describe above have their own forms of implicit
 #    input into the authentication process that are described above.  #    input into the authentication process that are described above.
   # NOTE:
   #   This is also used to change the authentication credential values (e.g. passwd).
   #   
 #  #
 sub ChangeAuthenticationHandler {  sub change_authentication_handler {
     my $cmd     = shift;  
     my $tail    = shift;      my ($cmd, $tail, $client) = @_;
     my $client  = shift;  
         
     my $userinput  = "$cmd:$tail";              # Reconstruct user input.      my $userinput  = "$cmd:$tail";              # Reconstruct user input.
   
     my ($udom,$uname,$umode,$npass)=split(/:/,$tail);      my ($udom,$uname,$umode,$npass)=split(/:/,$tail);
     &Debug("cmd = ".$cmd." domain= ".$udom."uname =".$uname." umode= ".$umode);      &Debug("cmd = ".$cmd." domain= ".$udom."uname =".$uname." umode= ".$umode);
     if ($udom ne $currentdomainid) {      if ($udom ne $currentdomainid) {
  Failure( $client, "not_right_domain\n", $client);   &Failure( $client, "not_right_domain\n", $client);
     } else {      } else {
   
  chomp($npass);   chomp($npass);
   
  $npass=&unescape($npass);   $npass=&unescape($npass);
  my $passfilename = PasswordPath($udom, $uname);   my $oldauth = &get_auth_type($udom, $uname); # Get old auth info.
    my $passfilename = &password_path($udom, $uname);
  if ($passfilename) { # Not allowed to create a new user!!   if ($passfilename) { # Not allowed to create a new user!!
     my $result=&make_passwd_file($uname, $umode,$npass,$passfilename);      # If just changing the unix passwd. need to arrange to run
     Reply($client, $result, $userinput);      # passwd since otherwise make_passwd_file will run
       # lcuseradd which fails if an account already exists
       # (to prevent an unscrupulous LONCAPA admin from stealing
       # an existing account by overwriting it as a LonCAPA account).
   
       if(($oldauth =~/^unix/) && ($umode eq "unix")) {
    my $result = &change_unix_password($uname, $npass);
    &logthis("Result of password change for $uname: ".$result);
    if ($result eq "ok") {
       &Reply($client, "$result\n")
    } else {
       &Failure($client, "$result\n");
    }
       } else {
    my $result=&make_passwd_file($uname, $umode,$npass,$passfilename);
    #
    #  If the current auth mode is internal, and the old auth mode was
    #  unix, or krb*,  and the user is an author for this domain,
    #  re-run manage_permissions for that role in order to be able
    #  to take ownership of the construction space back to www:www
    #
   
   
    if( (($oldauth =~ /^unix/) && ($umode eq "internal")) ||
       (($oldauth =~ /^internal/) && ($umode eq "unix")) ) { 
       if(&is_author($udom, $uname)) {
    &Debug(" Need to manage author permissions...");
    &manage_permissions("/$udom/_au", $udom, $uname, "$umode:");
       }
    }
    &Reply($client, $result, $userinput);
       }
          
   
  } else {          } else {       
     Failure($client, "non_authorized", $userinput); # Fail the user now.      &Failure($client, "non_authorized\n", $userinput); # Fail the user now.
  }   }
     }      }
     return 1;      return 1;
 }  }
 RegisterHandler("changeuserauth", \&ChangeAuthenticationHandler, 1,1, 0);  &register_handler("changeuserauth", \&change_authentication_handler, 1,1, 0);
   
 #  #
 #   Determines if this is the home server for a user.  The home server  #   Determines if this is the home server for a user.  The home server
Line 981  RegisterHandler("changeuserauth", \&Chan Line 1883  RegisterHandler("changeuserauth", \&Chan
 #    The authentication systems describe above have their own forms of implicit  #    The authentication systems describe above have their own forms of implicit
 #    input into the authentication process that are described above.  #    input into the authentication process that are described above.
 #  #
 sub IsHomeHandler {  sub is_home_handler {
     my $cmd     = shift;      my ($cmd, $tail, $client) = @_;
     my $tail    = shift;  
     my $client  = shift;  
         
     my $userinput  = "$cmd:$tail";      my $userinput  = "$cmd:$tail";
         
     my ($udom,$uname)=split(/:/,$tail);      my ($udom,$uname)=split(/:/,$tail);
     chomp($uname);      chomp($uname);
     my $passfile = PasswordFilename($udom, $uname);      my $passfile = &password_filename($udom, $uname);
     if($passfile) {      if($passfile) {
  Reply( $client, "found\n", $userinput);   &Reply( $client, "found\n", $userinput);
     } else {      } else {
  Failure($client, "not_found\n", $userinput);   &Failure($client, "not_found\n", $userinput);
     }      }
     return 1;      return 1;
 }  }
 RegisterHandler("home", \&IsHomeHandler, 0,1,0);  &register_handler("home", \&is_home_handler, 0,1,0);
   
 #  #
 #   Process an update request for a resource?? I think what's going on here is  #   Process an update request for a resource?? I think what's going on here is
 #   that a resource has been modified that we hold a subscription to.  #   that a resource has been modified that we hold a subscription to.
Line 1021  RegisterHandler("home", \&IsHomeHandler, Line 1922  RegisterHandler("home", \&IsHomeHandler,
 #    The authentication systems describe above have their own forms of implicit  #    The authentication systems describe above have their own forms of implicit
 #    input into the authentication process that are described above.  #    input into the authentication process that are described above.
 #  #
 sub UpdateResourceHandler {  sub update_resource_handler {
     my $cmd    = shift;  
     my $tail   = shift;      my ($cmd, $tail, $client) = @_;
     my $client = shift;  
         
     my $userinput = "$cmd:$tail";      my $userinput = "$cmd:$tail";
         
     my $fname=$tail;      my $fname= $tail; # This allows interactive testing
   
   
     my $ownership=ishome($fname);      my $ownership=ishome($fname);
     if ($ownership eq 'not_owner') {      if ($ownership eq 'not_owner') {
  if (-e $fname) {   if (-e $fname) {
Line 1070  sub UpdateResourceHandler { Line 1972  sub UpdateResourceHandler {
     rename($transname,$fname);      rename($transname,$fname);
  }   }
     }      }
     Reply( $client, "ok\n", $userinput);      &Reply( $client, "ok\n", $userinput);
  } else {   } else {
     Failure($client, "not_found\n", $userinput);      &Failure($client, "not_found\n", $userinput);
  }   }
     } else {      } else {
  Failure($client, "rejected\n", $userinput);   &Failure($client, "rejected\n", $userinput);
     }      }
     return 1;      return 1;
 }  }
 RegisterHandler("update", \&UpdateResourceHandler, 0 ,1, 0);  &register_handler("update", \&update_resource_handler, 0 ,1, 0);
   
 #  #
 #   Fetch a user file from a remote server:  #   Fetch a user file from a remote server to the user's home directory
   #   userfiles subdir.
 # Parameters:  # Parameters:
 #    $cmd      - The command that got us here.  #    $cmd      - The command that got us here.
 #    $tail     - Tail of the command (remaining parameters).  #    $tail     - Tail of the command (remaining parameters).
Line 1091  RegisterHandler("update", \&UpdateResour Line 1994  RegisterHandler("update", \&UpdateResour
 #     0        - Requested to exit, caller should shut down.  #     0        - Requested to exit, caller should shut down.
 #     1        - Continue processing.  #     1        - Continue processing.
 #  #
 sub FetchUserFileHandler {  sub fetch_user_file_handler {
     my $cmd     = shift;  
     my $tail    = shift;      my ($cmd, $tail, $client) = @_;
     my $client  = shift;  
      
     my $userinput = "$cmd:$tail";      my $userinput = "$cmd:$tail";
     my $fname           = $tail;      my $fname           = $tail;
     my ($udom,$uname,$ufile)=split(/\//,$fname);      my ($udom,$uname,$ufile) = ($fname =~ m|^([^/]+)/([^/]+)/(.+)$|);
     my $udir=propath($udom,$uname).'/userfiles';      my $udir=&propath($udom,$uname).'/userfiles';
     unless (-e $udir) {      unless (-e $udir) {
  mkdir($udir,0770);    mkdir($udir,0770); 
     }      }
       Debug("fetch user file for $fname");
     if (-e $udir) {      if (-e $udir) {
  $ufile=~s/^[\.\~]+//;   $ufile=~s/^[\.\~]+//;
  $ufile=~s/\///g;  
    # IF necessary, create the path right down to the file.
    # Note that any regular files in the way of this path are
    # wiped out to deal with some earlier folly of mine.
   
    if (!&mkpath($udir.'/'.$ufile)) {
       &Failure($client, "unable_to_create\n", $userinput);    
    }
   
  my $destname=$udir.'/'.$ufile;   my $destname=$udir.'/'.$ufile;
  my $transname=$udir.'/'.$ufile.'.in.transit';   my $transname=$udir.'/'.$ufile.'.in.transit';
  my $remoteurl='http://'.$clientip.'/userfiles/'.$fname;   my $remoteurl='http://'.$clientip.'/userfiles/'.$fname;
  my $response;   my $response;
    Debug("Remote URL : $remoteurl Transfername $transname Destname: $destname");
  alarm(120);   alarm(120);
  {   {
     my $ua=new LWP::UserAgent;      my $ua=new LWP::UserAgent;
Line 1121  sub FetchUserFileHandler { Line 2033  sub FetchUserFileHandler {
     unlink($transname);      unlink($transname);
     my $message=$response->status_line;      my $message=$response->status_line;
     &logthis("LWP GET: $message for $fname ($remoteurl)");      &logthis("LWP GET: $message for $fname ($remoteurl)");
     Failure($client, "failed\n", $userinput);      &Failure($client, "failed\n", $userinput);
  } else {   } else {
       Debug("Renaming $transname to $destname");
     if (!rename($transname,$destname)) {      if (!rename($transname,$destname)) {
  &logthis("Unable to move $transname to $destname");   &logthis("Unable to move $transname to $destname");
  unlink($transname);   unlink($transname);
  Failure($client, "failed\n", $userinput);   &Failure($client, "failed\n", $userinput);
     } else {      } else {
  Reply($client, "ok\n", $userinput);   &Reply($client, "ok\n", $userinput);
     }      }
  }      }   
     } else {      } else {
  Failure($client, "not_home\n", $userinput);   &Failure($client, "not_home\n", $userinput);
       }
       return 1;
   }
   &register_handler("fetchuserfile", \&fetch_user_file_handler, 0, 1, 0);
   
   #
   #   Remove a file from a user's home directory userfiles subdirectory.
   # Parameters:
   #    cmd   - the Lond request keyword that got us here.
   #    tail  - the part of the command past the keyword.
   #    client- File descriptor connected with the client.
   #
   # Returns:
   #    1    - Continue processing.
   sub remove_user_file_handler {
       my ($cmd, $tail, $client) = @_;
   
       my ($fname) = split(/:/, $tail); # Get rid of any tailing :'s lonc may have sent.
   
       my ($udom,$uname,$ufile) = ($fname =~ m|^([^/]+)/([^/]+)/(.+)$|);
       if ($ufile =~m|/\.\./|) {
    # any files paths with /../ in them refuse 
    # to deal with
    &Failure($client, "refused\n", "$cmd:$tail");
       } else {
    my $udir = &propath($udom,$uname);
    if (-e $udir) {
       my $file=$udir.'/userfiles/'.$ufile;
       if (-e $file) {
    #
    #   If the file is a regular file unlink is fine...
    #   However it's possible the client wants a dir.
    #   removed, in which case rmdir is more approprate:
    #
           if (-f $file){
       unlink($file);
    } elsif(-d $file) {
       rmdir($file);
    }
    if (-e $file) {
       #  File is still there after we deleted it ?!?
   
       &Failure($client, "failed\n", "$cmd:$tail");
    } else {
       &Reply($client, "ok\n", "$cmd:$tail");
    }
       } else {
    &Failure($client, "not_found\n", "$cmd:$tail");
       }
    } else {
       &Failure($client, "not_home\n", "$cmd:$tail");
    }
     }      }
     return 1;      return 1;
 }  }
 RegisterHandler("fetchuserfile", \&FetchUserFileHandler, 0, 1, 0);  &register_handler("removeuserfile", \&remove_user_file_handler, 0,1,0);
   
 #  #
 #   Authenticate access to a user file.  Question?   The token for athentication  #   make a directory in a user's home directory userfiles subdirectory.
 #   is allowed to be sent as cleartext is this really what we want?  This token  # Parameters:
 #   represents the user's session id.  Once it is forged does this allow too much   #    cmd   - the Lond request keyword that got us here.
 #   access??  #    tail  - the part of the command past the keyword.
   #    client- File descriptor connected with the client.
 #  #
   # Returns:
   #    1    - Continue processing.
   sub mkdir_user_file_handler {
       my ($cmd, $tail, $client) = @_;
   
       my ($dir) = split(/:/, $tail); # Get rid of any tailing :'s lonc may have sent.
       $dir=&unescape($dir);
       my ($udom,$uname,$ufile) = ($dir =~ m|^([^/]+)/([^/]+)/(.+)$|);
       if ($ufile =~m|/\.\./|) {
    # any files paths with /../ in them refuse 
    # to deal with
    &Failure($client, "refused\n", "$cmd:$tail");
       } else {
    my $udir = &propath($udom,$uname);
    if (-e $udir) {
       my $newdir=$udir.'/userfiles/'.$ufile.'/';
       if (!&mkpath($newdir)) {
    &Failure($client, "failed\n", "$cmd:$tail");
       }
       &Reply($client, "ok\n", "$cmd:$tail");
    } else {
       &Failure($client, "not_home\n", "$cmd:$tail");
    }
       }
       return 1;
   }
   &register_handler("mkdiruserfile", \&mkdir_user_file_handler, 0,1,0);
   
   #
   #   rename a file in a user's home directory userfiles subdirectory.
 # Parameters:  # Parameters:
 #    $cmd      - The command that got us here.  #    cmd   - the Lond request keyword that got us here.
 #    $tail     - Tail of the command (remaining parameters).  #    tail  - the part of the command past the keyword.
 #    $client   - File descriptor connected to client.  #    client- File descriptor connected with the client.
 # Returns  #
 #     0        - Requested to exit, caller should shut down.  # Returns:
 #     1        - Continue processing.  #    1    - Continue processing.
 sub AuthenticateUserFileAccess {  sub rename_user_file_handler {
     my $cmd       = shift;      my ($cmd, $tail, $client) = @_;
     my $tail      = shift;  
     my $client    = shift;  
     my $userinput = "$cmd:$tail";  
   
     my ($fname,$session)=split(/:/,$tail);      my ($udom,$uname,$old,$new) = split(/:/, $tail);
       $old=&unescape($old);
       $new=&unescape($new);
       if ($new =~m|/\.\./| || $old =~m|/\.\./|) {
    # any files paths with /../ in them refuse to deal with
    &Failure($client, "refused\n", "$cmd:$tail");
       } else {
    my $udir = &propath($udom,$uname);
    if (-e $udir) {
       my $oldfile=$udir.'/userfiles/'.$old;
       my $newfile=$udir.'/userfiles/'.$new;
       if (-e $newfile) {
    &Failure($client, "exists\n", "$cmd:$tail");
       } elsif (! -e $oldfile) {
    &Failure($client, "not_found\n", "$cmd:$tail");
       } else {
    if (!rename($oldfile,$newfile)) {
       &Failure($client, "failed\n", "$cmd:$tail");
    } else {
       &Reply($client, "ok\n", "$cmd:$tail");
    }
       }
    } else {
       &Failure($client, "not_home\n", "$cmd:$tail");
    }
       }
       return 1;
   }
   &register_handler("renameuserfile", \&rename_user_file_handler, 0,1,0);
   
   #
   #  Authenticate access to a user file by checking that the token the user's 
   #  passed also exists in their session file
   #
   # Parameters:
   #   cmd      - The request keyword that dispatched to tus.
   #   tail     - The tail of the request (colon separated parameters).
   #   client   - Filehandle open on the client.
   # Return:
   #    1.
   sub token_auth_user_file_handler {
       my ($cmd, $tail, $client) = @_;
   
       my ($fname, $session) = split(/:/, $tail);
       
     chomp($session);      chomp($session);
     my $reply='non_auth';      my $reply="non_auth\n";
     if (open(ENVIN,$perlvar{'lonIDsDir'}.'/'.$session.'.id')) {      if (open(ENVIN,$perlvar{'lonIDsDir'}.'/'.
        $session.'.id')) {
  while (my $line=<ENVIN>) {   while (my $line=<ENVIN>) {
     if ($line=~/userfile\.$fname\=/) {       if ($line=~ m|userfile\.\Q$fname\E\=|) { $reply="ok\n"; }
  $reply='ok';   
     }  
  }   }
  close(ENVIN);   close(ENVIN);
  Reply($client, $reply."\n", $userinput);   &Reply($client, $reply, "$cmd:$tail");
     } else {      } else {
  Failure($client, "invalid_token\n", $userinput);   &Failure($client, "invalid_token\n", "$cmd:$tail");
     }      }
     return 1;      return 1;
      
 }  }
 RegisterHandler("tokenauthuserfile", \&AuthenticateUserFileAccess, 0, 1, 0);  &register_handler("tokenauthuserfile", \&token_auth_user_file_handler, 0,1,0);
   
 #  #
 #   Unsubscribe from a resource.  #   Unsubscribe from a resource.
 #  #
Line 1185  RegisterHandler("tokenauthuserfile", \&A Line 2223  RegisterHandler("tokenauthuserfile", \&A
 #     0        - Requested to exit, caller should shut down.  #     0        - Requested to exit, caller should shut down.
 #     1        - Continue processing.  #     1        - Continue processing.
 #  #
 sub UnsubscribeHandler {  sub unsubscribe_handler {
     my $cmd      = shift;      my ($cmd, $tail, $client) = @_;
     my $tail     = shift;  
     my $client   = shift;  
     my $userinput= "$cmd:$tail";      my $userinput= "$cmd:$tail";
           
     my $fname = $tail;      my ($fname) = split(/:/,$tail); # Split in case there's extrs.
   
       &Debug("Unsubscribing $fname");
     if (-e $fname) {      if (-e $fname) {
  Reply($client, &unsub($client,$fname,$clientip), $userinput);   &Debug("Exists");
    &Reply($client, &unsub($fname,$clientip), $userinput);
     } else {      } else {
  Failure($client, "not_found\n", $userinput);   &Failure($client, "not_found\n", $userinput);
     }      }
     return 1;      return 1;
 }  }
 RegisterHandler("unusb", \&UnsubscribeHandler, 0, 1, 0);  &register_handler("unsub", \&unsubscribe_handler, 0, 1, 0);
   
 #   Subscribe to a resource  #   Subscribe to a resource
 #  #
Line 1211  RegisterHandler("unusb", \&UnsubscribeHa Line 2251  RegisterHandler("unusb", \&UnsubscribeHa
 #     0        - Requested to exit, caller should shut down.  #     0        - Requested to exit, caller should shut down.
 #     1        - Continue processing.  #     1        - Continue processing.
 #  #
 sub SubscribeHandler {  sub subscribe_handler {
     my $cmd        = shift;      my ($cmd, $tail, $client)= @_;
     my $tail       = shift;  
     my $client     = shift;  
     my $userinput  = "$cmd:$tail";      my $userinput  = "$cmd:$tail";
   
     Reply( $client, &subscribe($userinput,$clientip), $userinput);      &Reply( $client, &subscribe($userinput,$clientip), $userinput);
   
     return 1;      return 1;
 }  }
 RegisterHandler("sub", \&SubscribeHandler, 0, 1, 0);  &register_handler("sub", \&subscribe_handler, 0, 1, 0);
   
 #  #
 #   Determine the version of a resource (?) Or is it return  #   Determine the version of a resource (?) Or is it return
Line 1236  RegisterHandler("sub", \&SubscribeHandle Line 2275  RegisterHandler("sub", \&SubscribeHandle
 #     0        - Requested to exit, caller should shut down.  #     0        - Requested to exit, caller should shut down.
 #     1        - Continue processing.  #     1        - Continue processing.
 #  #
 sub CurrentVersionHandler {  sub current_version_handler {
     my $cmd      = shift;      my ($cmd, $tail, $client) = @_;
     my $tail     = shift;  
     my $client   = shift;  
     my $userinput= "$cmd:$tail";      my $userinput= "$cmd:$tail";
         
     my $fname   = $tail;      my $fname   = $tail;
     Reply( $client, &currentversion($fname)."\n", $userinput);      &Reply( $client, &currentversion($fname)."\n", $userinput);
     return 1;      return 1;
   
 }  }
 RegisterHandler("currentversion", \&CurrentVersionHandler, 0, 1, 0);  &register_handler("currentversion", \&current_version_handler, 0, 1, 0);
   
   
 #  Make an entry in a user's activity log.  #  Make an entry in a user's activity log.
 #  #
Line 1260  RegisterHandler("currentversion", \&Curr Line 2297  RegisterHandler("currentversion", \&Curr
 #     0        - Requested to exit, caller should shut down.  #     0        - Requested to exit, caller should shut down.
 #     1        - Continue processing.  #     1        - Continue processing.
 #  #
 sub ActivityLogEntryHandler {  sub activity_log_handler {
     my $cmd      = shift;      my ($cmd, $tail, $client) = @_;
     my $tail     = shift;  
     my $client   = shift;  
     my $userinput= "$cmd:$tail";      my $userinput= "$cmd:$tail";
   
     my ($udom,$uname,$what)=split(/:/,$tail);      my ($udom,$uname,$what)=split(/:/,$tail);
     chomp($what);      chomp($what);
     my $proname=propath($udom,$uname);      my $proname=&propath($udom,$uname);
     my $now=time;      my $now=time;
     my $hfh;      my $hfh;
     if ($hfh=IO::File->new(">>$proname/activity.log")) {       if ($hfh=IO::File->new(">>$proname/activity.log")) { 
  print $hfh "$now:$clientname:$what\n";   print $hfh "$now:$clientname:$what\n";
  Reply( $client, "ok\n", $userinput);    &Reply( $client, "ok\n", $userinput); 
     } else {      } else {
  Failure($client, "error: ".($!+0)." IO::File->new Failed "   &Failure($client, "error: ".($!+0)." IO::File->new Failed "
       ."while attempting log\n",    ."while attempting log\n", 
       $userinput);   $userinput);
     }      }
   
     return 1;      return 1;
 }  }
 RegisterHandler("log", \&ActivityLogEntryHandler, 0, 1, 0);  &register_handler("log", \&activity_log_handler, 0, 1, 0);
   
 #  #
 #   Put a namespace entry in a user profile hash.  #   Put a namespace entry in a user profile hash.
 #   My druthers would be for this to be an encrypted interaction too.  #   My druthers would be for this to be an encrypted interaction too.
Line 1297  RegisterHandler("log", \&ActivityLogEntr Line 2335  RegisterHandler("log", \&ActivityLogEntr
 #     0        - Requested to exit, caller should shut down.  #     0        - Requested to exit, caller should shut down.
 #     1        - Continue processing.  #     1        - Continue processing.
 #  #
 sub PutUserProfileEntry {  sub put_user_profile_entry {
     my $cmd       = shift;      my ($cmd, $tail, $client)  = @_;
     my $tail      = shift;  
     my $client    = shift;  
     my $userinput = "$cmd:$tail";      my $userinput = "$cmd:$tail";
           
     my ($udom,$uname,$namespace,$what) =split(/:/,$tail);      my ($udom,$uname,$namespace,$what) =split(/:/,$tail,4);
     if ($namespace ne 'roles') {      if ($namespace ne 'roles') {
  chomp($what);   chomp($what);
  my $hashref = TieUserHash($udom, $uname, $namespace,   my $hashref = &tie_user_hash($udom, $uname, $namespace,
   &GDBM_WRCREAT(),"P",$what);    &GDBM_WRCREAT(),"P",$what);
  if($hashref) {   if($hashref) {
     my @pairs=split(/\&/,$what);      my @pairs=split(/\&/,$what);
Line 1315  sub PutUserProfileEntry { Line 2352  sub PutUserProfileEntry {
  $hashref->{$key}=$value;   $hashref->{$key}=$value;
     }      }
     if (untie(%$hashref)) {      if (untie(%$hashref)) {
  Reply( $client, "ok\n", $userinput);   &Reply( $client, "ok\n", $userinput);
     } else {      } else {
  Failure($client, "error: ".($!+0)." untie(GDBM) failed ".   &Failure($client, "error: ".($!+0)." untie(GDBM) failed ".
  "while attempting put\n",    "while attempting put\n", 
  $userinput);   $userinput);
     }      }
  } else {   } else {
     Failure( $client, "error: ".($!)." tie(GDBM) Failed ".      &Failure( $client, "error: ".($!)." tie(GDBM) Failed ".
      "while attempting put\n", $userinput);       "while attempting put\n", $userinput);
  }   }
     } else {      } else {
         Failure( $client, "refused\n", $userinput);          &Failure( $client, "refused\n", $userinput);
     }      }
           
     return 1;      return 1;
 }  }
 RegisterHandler("put", \&PutUserProfileEntry, 0, 1, 0);  &register_handler("put", \&put_user_profile_entry, 0, 1, 0);
   
   #   Put a piece of new data in hash, returns error if entry already exists
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   #
   sub newput_user_profile_entry {
       my ($cmd, $tail, $client)  = @_;
   
       my $userinput = "$cmd:$tail";
   
       my ($udom,$uname,$namespace,$what) =split(/:/,$tail,4);
       if ($namespace eq 'roles') {
           &Failure( $client, "refused\n", $userinput);
    return 1;
       }
   
       chomp($what);
   
       my $hashref = &tie_user_hash($udom, $uname, $namespace,
    &GDBM_WRCREAT(),"N",$what);
       if(!$hashref) {
    &Failure( $client, "error: ".($!)." tie(GDBM) Failed ".
     "while attempting put\n", $userinput);
    return 1;
       }
   
       my @pairs=split(/\&/,$what);
       foreach my $pair (@pairs) {
    my ($key,$value)=split(/=/,$pair);
    if (exists($hashref->{$key})) {
       &Failure($client, "key_exists: ".$key."\n",$userinput);
       return 1;
    }
       }
   
       foreach my $pair (@pairs) {
    my ($key,$value)=split(/=/,$pair);
    $hashref->{$key}=$value;
       }
   
       if (untie(%$hashref)) {
    &Reply( $client, "ok\n", $userinput);
       } else {
    &Failure($client, "error: ".($!+0)." untie(GDBM) failed ".
    "while attempting put\n", 
    $userinput);
       }
       return 1;
   }
   &register_handler("newput", \&newput_user_profile_entry, 0, 1, 0);
   
 #   # 
 #   Increment a profile entry in the user history file.  #   Increment a profile entry in the user history file.
Line 1348  RegisterHandler("put", \&PutUserProfileE Line 2440  RegisterHandler("put", \&PutUserProfileE
 #     0        - Requested to exit, caller should shut down.  #     0        - Requested to exit, caller should shut down.
 #     1        - Continue processing.  #     1        - Continue processing.
 #  #
 sub IncrementUserValueHandler {  sub increment_user_value_handler {
     my $cmd         = shift;      my ($cmd, $tail, $client) = @_;
     my $tail        = shift;      
     my $client      = shift;  
     my $userinput   = "$cmd:$tail";      my $userinput   = "$cmd:$tail";
       
     my ($udom,$uname,$namespace,$what) =split(/:/,$tail);      my ($udom,$uname,$namespace,$what) =split(/:/,$tail);
     if ($namespace ne 'roles') {      if ($namespace ne 'roles') {
         chomp($what);          chomp($what);
  my $hashref = TieUserHash($udom, $uname,   my $hashref = &tie_user_hash($udom, $uname,
   $namespace, &GDBM_WRCREAT(),       $namespace, &GDBM_WRCREAT(),
   "P",$what);       "P",$what);
  if ($hashref) {   if ($hashref) {
     my @pairs=split(/\&/,$what);      my @pairs=split(/\&/,$what);
     foreach my $pair (@pairs) {      foreach my $pair (@pairs) {
  my ($key,$value)=split(/=/,$pair);   my ($key,$value)=split(/=/,$pair);
                   $value = &unescape($value);
  # We could check that we have a number...   # We could check that we have a number...
  if (! defined($value) || $value eq '') {   if (! defined($value) || $value eq '') {
     $value = 1;      $value = 1;
  }   }
  $hashref->{$key}+=$value;   $hashref->{$key}+=$value;
                   if ($namespace eq 'nohist_resourcetracker') {
                       if ($hashref->{$key} < 0) {
                           $hashref->{$key} = 0;
                       }
                   }
     }      }
     if (untie(%$hashref)) {      if (untie(%$hashref)) {
  Reply( $client, "ok\n", $userinput);   &Reply( $client, "ok\n", $userinput);
     } else {      } else {
  Failure($client, "error: ".($!+0)." untie(GDBM) failed ".   &Failure($client, "error: ".($!+0)." untie(GDBM) failed ".
  "while attempting inc\n", $userinput);   "while attempting inc\n", $userinput);
     }      }
  } else {   } else {
     Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".      &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
     "while attempting inc\n", $userinput);       "while attempting inc\n", $userinput);
  }   }
     } else {      } else {
  Failure($client, "refused\n", $userinput);   &Failure($client, "refused\n", $userinput);
     }      }
           
     return 1;      return 1;
 }  }
 RegisterHandler("inc", \&IncrementUserValueHandler, 0, 1, 0);  &register_handler("inc", \&increment_user_value_handler, 0, 1, 0);
   
 #  #
 #   Put a new role for a user.  Roles are LonCAPA's packaging of permissions.  #   Put a new role for a user.  Roles are LonCAPA's packaging of permissions.
 #   Each 'role' a user has implies a set of permissions.  Adding a new role  #   Each 'role' a user has implies a set of permissions.  Adding a new role
Line 1407  RegisterHandler("inc", \&IncrementUserVa Line 2505  RegisterHandler("inc", \&IncrementUserVa
 #     1         - To continue processing.  #     1         - To continue processing.
 #  #
 #  #
 sub RolesPutHandler {  sub roles_put_handler {
     my $cmd        = shift;      my ($cmd, $tail, $client) = @_;
     my $tail       = shift;  
     my $client     = shift;  
     my $userinput  = "$cmd:$tail";      my $userinput  = "$cmd:$tail";
   
     my ($exedom,$exeuser,$udom,$uname,$what)   =split(/:/,$tail);      my ( $exedom, $exeuser, $udom, $uname,  $what) = split(/:/,$tail);
     &Debug("cmd = ".$cmd." exedom= ".$exedom."user = ".$exeuser." udom=".$udom.      
    "what = ".$what);  
     my $namespace='roles';      my $namespace='roles';
     chomp($what);      chomp($what);
     my $hashref = TieUserHash($udom, $uname, $namespace,      my $hashref = &tie_user_hash($udom, $uname, $namespace,
       &GDBM_WRCREAT(), "P",   &GDBM_WRCREAT(), "P",
       "$exedom:$exeuser:$what");   "$exedom:$exeuser:$what");
     #      #
     #  Log the attempt to set a role.  The {}'s here ensure that the file       #  Log the attempt to set a role.  The {}'s here ensure that the file 
     #  handle is open for the minimal amount of time.  Since the flush      #  handle is open for the minimal amount of time.  Since the flush
     #  is done on close this improves the chances the log will be an un-      #  is done on close this improves the chances the log will be an un-
     #  corrupted ordered thing.      #  corrupted ordered thing.
     if ($hashref) {      if ($hashref) {
    my $pass_entry = &get_auth_type($udom, $uname);
    my ($auth_type,$pwd)  = split(/:/, $pass_entry);
    $auth_type = $auth_type.":";
  my @pairs=split(/\&/,$what);   my @pairs=split(/\&/,$what);
  foreach my $pair (@pairs) {   foreach my $pair (@pairs) {
     my ($key,$value)=split(/=/,$pair);      my ($key,$value)=split(/=/,$pair);
     &ManagePermissions($key, $udom, $uname,      &manage_permissions($key, $udom, $uname,
        &GetAuthType( $udom, $uname));         $auth_type);
     $hashref->{$key}=$value;      $hashref->{$key}=$value;
  }   }
  if (untie($hashref)) {   if (untie($hashref)) {
     Reply($client, "ok\n", $userinput);      &Reply($client, "ok\n", $userinput);
  } else {   } else {
     Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ".      &Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ".
      "while attempting rolesput\n", $userinput);       "while attempting rolesput\n", $userinput);
  }   }
     } else {      } else {
  Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".   &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
  "while attempting rolesput\n", $userinput);   "while attempting rolesput\n", $userinput);
     }      }
     return 1;      return 1;
 }  }
 RegisterHandler("rolesput", \&RolesPutHandler, 1,1,0);  # Encoded client only.  &register_handler("rolesput", \&roles_put_handler, 1,1,0);  # Encoded client only.
   
 #  #
 #   Deletes (removes) a role for a user.   This is equivalent to removing  #   Deletes (removes) a role for a user.   This is equivalent to removing
 #  a permissions package associated with the role from the user's profile.  #  a permissions package associated with the role from the user's profile.
Line 1464  RegisterHandler("rolesput", \&RolesPutHa Line 2565  RegisterHandler("rolesput", \&RolesPutHa
 #     1                    - Continue processing  #     1                    - Continue processing
 #     0                    - Exit.  #     0                    - Exit.
 #  #
 sub RolesDeleteHandler {  sub roles_delete_handler {
     my $cmd          = shift;      my ($cmd, $tail, $client)  = @_;
     my $tail         = shift;  
     my $client       = shift;  
     my $userinput    = "$cmd:$tail";      my $userinput    = "$cmd:$tail";
         
     my ($exedom,$exeuser,$udom,$uname,$what)=split(/:/,$tail);      my ($exedom,$exeuser,$udom,$uname,$what)=split(/:/,$tail);
Line 1475  sub RolesDeleteHandler { Line 2575  sub RolesDeleteHandler {
    "what = ".$what);     "what = ".$what);
     my $namespace='roles';      my $namespace='roles';
     chomp($what);      chomp($what);
     my $hashref = TieUserHash($udom, $uname, $namespace,      my $hashref = &tie_user_hash($udom, $uname, $namespace,
       &GDBM_WRCREAT(), "D",   &GDBM_WRCREAT(), "D",
       "$exedom:$exeuser:$what");   "$exedom:$exeuser:$what");
           
     if ($hashref) {      if ($hashref) {
  my @rolekeys=split(/\&/,$what);   my @rolekeys=split(/\&/,$what);
Line 1486  sub RolesDeleteHandler { Line 2586  sub RolesDeleteHandler {
     delete $hashref->{$key};      delete $hashref->{$key};
  }   }
  if (untie(%$hashref)) {   if (untie(%$hashref)) {
     Reply($client, "ok\n", $userinput);      &Reply($client, "ok\n", $userinput);
  } else {   } else {
     Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ".      &Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ".
      "while attempting rolesdel\n", $userinput);       "while attempting rolesdel\n", $userinput);
  }   }
     } else {      } else {
         Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".          &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
  "while attempting rolesdel\n", $userinput);   "while attempting rolesdel\n", $userinput);
     }      }
           
     return 1;      return 1;
 }  }
 RegisterHandler("rolesdel", \&RolesDeleteHandler, 1,1, 0); # Encoded client only  &register_handler("rolesdel", \&roles_delete_handler, 1,1, 0); # Encoded client only
   
 # Unencrypted get from a user's profile database.  See   # Unencrypted get from a user's profile database.  See 
 # GetProfileEntryEncrypted for a version that does end-to-end encryption.  # GetProfileEntryEncrypted for a version that does end-to-end encryption.
Line 1519  RegisterHandler("rolesdel", \&RolesDelet Line 2619  RegisterHandler("rolesdel", \&RolesDelet
 #   1       - Continue processing.  #   1       - Continue processing.
 #   0       - Exit.  #   0       - Exit.
 #  #
 sub GetProfileEntry {  sub get_profile_entry {
     my $cmd      = shift;      my ($cmd, $tail, $client) = @_;
     my $tail     = shift;  
     my $client   = shift;  
     my $userinput= "$cmd:$tail";      my $userinput= "$cmd:$tail";
         
     my ($udom,$uname,$namespace,$what) = split(/:/,$tail);      my ($udom,$uname,$namespace,$what) = split(/:/,$tail);
     chomp($what);      chomp($what);
     my $hashref = TieUserHash($udom, $uname, $namespace,  
       &GDBM_READER());      my $replystring = read_profile($udom, $uname, $namespace, $what);
     if ($hashref) {      my ($first) = split(/:/,$replystring);
         my @queries=split(/\&/,$what);      if($first ne "error") {
         my $qresult='';   &Reply($client, "$replystring\n", $userinput);
   
  for (my $i=0;$i<=$#queries;$i++) {  
     $qresult.="$hashref->{$queries[$i]}&";    # Presumably failure gives empty string.  
  }  
  $qresult=~s/\&$//;              # Remove trailing & from last lookup.  
  if (untie(%$hashref)) {  
     Reply($client, "$qresult\n", $userinput);  
  } else {  
     Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".  
     "while attempting get\n", $userinput);  
  }  
     } else {      } else {
  if ($!+0 == 2) {               # +0 coerces errno -> number 2 is ENOENT   &Failure($client, $replystring." while attempting get\n", $userinput);
     Failure($client, "error:No such file or ".  
     "GDBM reported bad block error\n", $userinput);  
  } else {                        # Some other undifferentiated err.  
     Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".  
     "while attempting get\n", $userinput);  
  }  
     }      }
     return 1;      return 1;
   
   
 }  }
 RegisterHandler("get", \&GetProfileEntry, 0,1,0);  &register_handler("get", \&get_profile_entry, 0,1,0);
   
 #  #
 #  Process the encrypted get request.  Note that the request is sent  #  Process the encrypted get request.  Note that the request is sent
 #  in clear, but the reply is encrypted.  This is a small covert channel:  #  in clear, but the reply is encrypted.  This is a small covert channel:
Line 1574  RegisterHandler("get", \&GetProfileEntry Line 2659  RegisterHandler("get", \&GetProfileEntry
 #  Returns:  #  Returns:
 #     1      - Continue processing  #     1      - Continue processing
 #     0      - server should exit.  #     0      - server should exit.
 sub GetProfileEntryEncrypted {  sub get_profile_entry_encrypted {
     my $cmd       = shift;      my ($cmd, $tail, $client) = @_;
     my $tail      = shift;  
     my $client    = shift;  
     my $userinput = "$cmd:$tail";      my $userinput = "$cmd:$tail";
         
     my ($cmd,$udom,$uname,$namespace,$what) = split(/:/,$userinput);      my ($cmd,$udom,$uname,$namespace,$what) = split(/:/,$userinput);
     chomp($what);      chomp($what);
     my $hashref = TieUserHash($udom, $uname, $namespace,      my $qresult = read_profile($udom, $uname, $namespace, $what);
   &GDBM_READER());      my ($first) = split(/:/, $qresult);
     if ($hashref) {      if($first ne "error") {
         my @queries=split(/\&/,$what);  
         my $qresult='';   if ($cipher) {
  for (my $i=0;$i<=$#queries;$i++) {      my $cmdlength=length($qresult);
     $qresult.="$hashref->{$queries[$i]}&";      $qresult.="         ";
  }      my $encqresult='';
  if (untie(%$hashref)) {      for(my $encidx=0;$encidx<=$cmdlength;$encidx+=8) {
     $qresult=~s/\&$//;   $encqresult.= unpack("H16", 
     if ($cipher) {       $cipher->encrypt(substr($qresult,
  my $cmdlength=length($qresult);       $encidx,
  $qresult.="         ";       8)));
  my $encqresult='';  
  for(my $encidx=0;$encidx<=$cmdlength;$encidx+=8) {  
     $encqresult.= unpack("H16",   
  $cipher->encrypt(substr($qresult,  
  $encidx,  
  8)));  
  }  
  Reply( $client, "enc:$cmdlength:$encqresult\n", $userinput);  
     } else {  
  Failure( $client, "error:no_key\n", $userinput);  
     }      }
       &Reply( $client, "enc:$cmdlength:$encqresult\n", $userinput);
  } else {   } else {
     Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".   &Failure( $client, "error:no_key\n", $userinput);
     "while attempting eget\n", $userinput);      }
  }  
     } else {      } else {
  Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".   &Failure($client, "$qresult while attempting eget\n", $userinput);
  "while attempting eget\n", $userinput);  
     }      }
           
     return 1;      return 1;
 }  }
 RegisterHandler("eget", \&GetProfileEncrypted, 0, 1, 0);  &register_handler("eget", \&get_profile_entry_encrypted, 0, 1, 0);
   
 #  #
 #   Deletes a key in a user profile database.  #   Deletes a key in a user profile database.
Line 1637  RegisterHandler("eget", \&GetProfileEncr Line 2711  RegisterHandler("eget", \&GetProfileEncr
 #     0   - Exit server.  #     0   - Exit server.
 #  #
 #  #
   sub delete_profile_entry {
       my ($cmd, $tail, $client) = @_;
   
 sub DeleteProfileEntry {  
     my $cmd      = shift;  
     my $tail     = shift;  
     my $client   = shift;  
     my $userinput = "cmd:$tail";      my $userinput = "cmd:$tail";
   
     my ($udom,$uname,$namespace,$what) = split(/:/,$tail);      my ($udom,$uname,$namespace,$what) = split(/:/,$tail);
     chomp($what);      chomp($what);
     my $hashref = TieUserHash($udom, $uname, $namespace,      my $hashref = &tie_user_hash($udom, $uname, $namespace,
   &GDBM_WRCREAT(),   &GDBM_WRCREAT(),
   "D",$what);   "D",$what);
     if ($hashref) {      if ($hashref) {
         my @keys=split(/\&/,$what);          my @keys=split(/\&/,$what);
  foreach my $key (@keys) {   foreach my $key (@keys) {
     delete($hashref->{$key});      delete($hashref->{$key});
  }   }
  if (untie(%$hashref)) {   if (untie(%$hashref)) {
     Reply($client, "ok\n", $userinput);      &Reply($client, "ok\n", $userinput);
  } else {   } else {
     Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".      &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
     "while attempting del\n", $userinput);      "while attempting del\n", $userinput);
  }   }
     } else {      } else {
  Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".   &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
  "while attempting del\n", $userinput);   "while attempting del\n", $userinput);
     }      }
     return 1;      return 1;
 }  }
 RegisterHandler("del", \&DeleteProfileEntry, 0, 1, 0);  &register_handler("del", \&delete_profile_entry, 0, 1, 0);
   
 #  #
 #  List the set of keys that are defined in a profile database file.  #  List the set of keys that are defined in a profile database file.
 #  A successful reply from this will contain an & separated list of  #  A successful reply from this will contain an & separated list of
Line 1682  RegisterHandler("del", \&DeleteProfileEn Line 2755  RegisterHandler("del", \&DeleteProfileEn
 #    1    - Continue processing.  #    1    - Continue processing.
 #    0    - Exit the server.  #    0    - Exit the server.
 #  #
 sub GetProfileKeys {  sub get_profile_keys {
     my $cmd       = shift;      my ($cmd, $tail, $client) = @_;
     my $tail      = shift;  
     my $client    = shift;  
     my $userinput = "$cmd:$tail";      my $userinput = "$cmd:$tail";
   
     my ($udom,$uname,$namespace)=split(/:/,$tail);      my ($udom,$uname,$namespace)=split(/:/,$tail);
     my $qresult='';      my $qresult='';
     my $hashref = TieUserHash($udom, $uname, $namespace,      my $hashref = &tie_user_hash($udom, $uname, $namespace,
   &GDBM_READER());    &GDBM_READER());
     if ($hashref) {      if ($hashref) {
  foreach my $key (keys %$hashref) {   foreach my $key (keys %$hashref) {
Line 1698  sub GetProfileKeys { Line 2770  sub GetProfileKeys {
  }   }
  if (untie(%$hashref)) {   if (untie(%$hashref)) {
     $qresult=~s/\&$//;      $qresult=~s/\&$//;
     Reply($client, "$qresult\n", $userinput);      &Reply($client, "$qresult\n", $userinput);
  } else {   } else {
     Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".      &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
     "while attempting keys\n", $userinput);      "while attempting keys\n", $userinput);
  }   }
     } else {      } else {
  Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".   &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
  "while attempting keys\n", $userinput);   "while attempting keys\n", $userinput);
     }      }
         
     return 1;      return 1;
 }  }
 RegisterHandler("keys", \&GetProfileKeys, 0, 1, 0);  &register_handler("keys", \&get_profile_keys, 0, 1, 0);
   
 #  #
 #   Dump the contents of a user profile database.  #   Dump the contents of a user profile database.
 #   Note that this constitutes a very large covert channel too since  #   Note that this constitutes a very large covert channel too since
Line 1730  RegisterHandler("keys", \&GetProfileKeys Line 2803  RegisterHandler("keys", \&GetProfileKeys
 #     1    - Continue processing.  #     1    - Continue processing.
 #     0    - Exit the server.  #     0    - Exit the server.
 #  #
 sub DumpProfileDatabase {  sub dump_profile_database {
     my $cmd       = shift;      my ($cmd, $tail, $client) = @_;
     my $tail      = shift;  
     my $client    = shift;  
     my $userinput = "$cmd:$tail";      my $userinput = "$cmd:$tail";
         
     my ($udom,$uname,$namespace) = split(/:/,$tail);      my ($udom,$uname,$namespace) = split(/:/,$tail);
     my $hashref = TieUserHash($udom, $uname, $namespace,      my $hashref = &tie_user_hash($udom, $uname, $namespace,
   &GDBM_READER());   &GDBM_READER());
     if ($hashref) {      if ($hashref) {
  # Structure of %data:   # Structure of %data:
  # $data{$symb}->{$parameter}=$value;   # $data{$symb}->{$parameter}=$value;
Line 1768  sub DumpProfileDatabase { Line 2840  sub DumpProfileDatabase {
  }   }
     }      }
     chop($qresult);      chop($qresult);
     Reply($client , "$qresult\n", $userinput);      &Reply($client , "$qresult\n", $userinput);
  } else {   } else {
     Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ".      &Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ".
      "while attempting currentdump\n", $userinput);       "while attempting currentdump\n", $userinput);
  }   }
     } else {      } else {
  Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".   &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
  "while attempting currentdump\n", $userinput);   "while attempting currentdump\n", $userinput);
     }      }
   
     return 1;      return 1;
 }  }
 RegisterHandler("currentdump", \&DumpProfileDatabase, 0, 1, 0);  &register_handler("currentdump", \&dump_profile_database, 0, 1, 0);
   
 #  #
 #   Dump a profile database with an optional regular expression  #   Dump a profile database with an optional regular expression
 #   to match against the keys.  In this dump, no effort is made  #   to match against the keys.  In this dump, no effort is made
Line 1805  RegisterHandler("currentdump", \&DumpPro Line 2878  RegisterHandler("currentdump", \&DumpPro
 # Side effects:  # Side effects:
 #    response is written to $client.  #    response is written to $client.
 #  #
 sub DumpWithRegexp {  sub dump_with_regexp {
     my $cmd    = shift;      my ($cmd, $tail, $client) = @_;
     my $tail   = shift;  
     my $client = shift;  
   
     my $userinput = "$cmd:$tail";      my $userinput = "$cmd:$tail";
   
Line 1818  sub DumpWithRegexp { Line 2890  sub DumpWithRegexp {
     } else {      } else {
  $regexp='.';   $regexp='.';
     }      }
     my $hashref =TieUserHash($udom, $uname, $namespace,      my $hashref = &tie_user_hash($udom, $uname, $namespace,
  &GDBM_READER());   &GDBM_READER());
     if ($hashref) {      if ($hashref) {
         my $qresult='';          my $qresult='';
Line 1834  sub DumpWithRegexp { Line 2906  sub DumpWithRegexp {
  }   }
  if (untie(%$hashref)) {   if (untie(%$hashref)) {
     chop($qresult);      chop($qresult);
     Reply($client, "$qresult\n", $userinput);      &Reply($client, "$qresult\n", $userinput);
  } else {   } else {
     Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ".      &Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ".
      "while attempting dump\n", $userinput);       "while attempting dump\n", $userinput);
  }   }
     } else {      } else {
  Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".   &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
  "while attempting dump\n", $userinput);   "while attempting dump\n", $userinput);
     }      }
   
     return 1;      return 1;
 }  }
 RegisterHandler("dump", \&DumpWithRegexp, 0, 1, 0);  &register_handler("dump", \&dump_with_regexp, 0, 1, 0);
   
 #  Store an aitem in any database but the roles database.  #  Store a set of key=value pairs associated with a versioned name.
 #  #
 #  Parameters:  #  Parameters:
 #    $cmd                - Request command keyword.  #    $cmd                - Request command keyword.
Line 1866  RegisterHandler("dump", \&DumpWithRegexp Line 2938  RegisterHandler("dump", \&DumpWithRegexp
 #      1 (keep on processing).  #      1 (keep on processing).
 #  Side-Effects:  #  Side-Effects:
 #    Writes to the client  #    Writes to the client
 sub StoreHandler {  sub store_handler {
     my $cmd    = shift;      my ($cmd, $tail, $client) = @_;
     my $tail   = shift;  
     my $client = shift;  
     
     my $userinput = "$cmd:$tail";      my $userinput = "$cmd:$tail";
   
Line 1878  sub StoreHandler { Line 2948  sub StoreHandler {
   
  chomp($what);   chomp($what);
  my @pairs=split(/\&/,$what);   my @pairs=split(/\&/,$what);
  my $hashref  = TieUserHash($udom, $uname, $namespace,   my $hashref  = &tie_user_hash($udom, $uname, $namespace,
        &GDBM_WRCREAT(), "P",         &GDBM_WRCREAT(), "S",
        "$rid:$what");         "$rid:$what");
  if ($hashref) {   if ($hashref) {
     my $now = time;      my $now = time;
Line 1897  sub StoreHandler { Line 2967  sub StoreHandler {
     $allkeys.='timestamp';      $allkeys.='timestamp';
     $hashref->{"$version:keys:$rid"}=$allkeys;      $hashref->{"$version:keys:$rid"}=$allkeys;
     if (untie($hashref)) {      if (untie($hashref)) {
  Reply($client, "ok\n", $userinput);   &Reply($client, "ok\n", $userinput);
     } else {      } else {
  Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".   &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
  "while attempting store\n", $userinput);   "while attempting store\n", $userinput);
     }      }
  } else {   } else {
     Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".      &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
      "while attempting store\n", $userinput);       "while attempting store\n", $userinput);
  }   }
     } else {      } else {
  Failure($client, "refused\n", $userinput);   &Failure($client, "refused\n", $userinput);
     }      }
   
     return 1;      return 1;
 }  }
 RegisterHandler("store", \&StoreHandler, 0, 1, 0);  &register_handler("store", \&store_handler, 0, 1, 0);
   
 #  #
 #   Restore a prior version of a resource.  #  Dump out all versions of a resource that has key=value pairs associated
   # with it for each version.  These resources are built up via the store
   # command.
 #  #
 #  Parameters:  #  Parameters:
 #     $cmd               - Command keyword.  #     $cmd               - Command keyword.
Line 1928  RegisterHandler("store", \&StoreHandler, Line 3001  RegisterHandler("store", \&StoreHandler,
 #      1  indicating the caller should not yet exit.  #      1  indicating the caller should not yet exit.
 # Side-effects:  # Side-effects:
 #   Writes a reply to the client.  #   Writes a reply to the client.
   #   The reply is a string of the following shape:
   #   version=current&version:keys=k1:k2...&1:k1=v1&1:k2=v2...
   #    Where the 1 above represents version 1.
   #    this continues for all pairs of keys in all versions.
   #
 #  #
 sub RestoreHandler {  #    
     my $cmd     = shift;  #
     my $tail    = shift;  sub restore_handler {
     my $client  = shift;      my ($cmd, $tail, $client) = @_;
   
     my $userinput = "$cmd:$tail"; # Only used for logging purposes.      my $userinput = "$cmd:$tail"; # Only used for logging purposes.
   
Line 1940  sub RestoreHandler { Line 3018  sub RestoreHandler {
     $namespace=~s/\//\_/g;      $namespace=~s/\//\_/g;
     $namespace=~s/\W//g;      $namespace=~s/\W//g;
     chomp($rid);      chomp($rid);
     my $proname=propath($udom,$uname);      my $proname=&propath($udom,$uname);
     my $qresult='';      my $qresult='';
     my %hash;      my %hash;
     if (tie(%hash,'GDBM_File',"$proname/$namespace.db",      if (tie(%hash,'GDBM_File',"$proname/$namespace.db",
Line 1959  sub RestoreHandler { Line 3037  sub RestoreHandler {
  }   }
  if (untie(%hash)) {   if (untie(%hash)) {
     $qresult=~s/\&$//;      $qresult=~s/\&$//;
     Reply( $client, "$qresult\n", $userinput);      &Reply( $client, "$qresult\n", $userinput);
  } else {   } else {
     Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".      &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
     "while attempting restore\n", $userinput);      "while attempting restore\n", $userinput);
  }   }
     } else {      } else {
  Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".   &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
  "while attempting restore\n", $userinput);   "while attempting restore\n", $userinput);
     }      }
       
Line 1973  sub RestoreHandler { Line 3051  sub RestoreHandler {
   
   
 }  }
 RegisterHandler("restore", \&RestoreHandler, 0,1,0);  &register_handler("restore", \&restore_handler, 0,1,0);
   
 #  #
 #   Add a chat message to to a discussion board.  #   Add a chat message to to a discussion board.
Line 1993  RegisterHandler("restore", \&RestoreHand Line 3071  RegisterHandler("restore", \&RestoreHand
 #   writes a reply to the client.  #   writes a reply to the client.
 #  #
 #  #
 sub SendChatHandler {  sub send_chat_handler {
     my $cmd     = shift;      my ($cmd, $tail, $client) = @_;
     my $tail    = shift;  
     my $client  = shift;  
           
     my $userinput = "$cmd:$tail";      my $userinput = "$cmd:$tail";
   
     my ($cdom,$cnum,$newpost)=split(/\:/,$tail);      my ($cdom,$cnum,$newpost)=split(/\:/,$tail);
     &chatadd($cdom,$cnum,$newpost);      &chat_add($cdom,$cnum,$newpost);
     Reply($client, "ok\n", $userinput);      &Reply($client, "ok\n", $userinput);
   
     return 1;      return 1;
 }  }
 RegisterHandler("chatsend", \&SendChatHandler, 0, 1, 0);  &register_handler("chatsend", \&send_chat_handler, 0, 1, 0);
   
 #  #
 #   Retrieve the set of chat messagss from a discussion board.  #   Retrieve the set of chat messagss from a discussion board.
 #  #
Line 2024  RegisterHandler("chatsend", \&SendChatHa Line 3102  RegisterHandler("chatsend", \&SendChatHa
 # Side effects:  # Side effects:
 #    Response is written to the client.  #    Response is written to the client.
 #  #
 sub RetrieveChatHandler {  sub retrieve_chat_handler {
     my $cmd      = shift;      my ($cmd, $tail, $client) = @_;
     my $tail     = shift;  
     my $client   = shift;  
   
     my $userinput = "$cmd:$tail";      my $userinput = "$cmd:$tail";
   
     my ($cdom,$cnum,$udom,$uname)=split(/\:/,$tail);      my ($cdom,$cnum,$udom,$uname)=split(/\:/,$tail);
     my $reply='';      my $reply='';
     foreach (&getchat($cdom,$cnum,$udom,$uname)) {      foreach (&get_chat($cdom,$cnum,$udom,$uname)) {
  $reply.=&escape($_).':';   $reply.=&escape($_).':';
     }      }
     $reply=~s/\:$//;      $reply=~s/\:$//;
     Reply($client, $reply."\n", $userinput);      &Reply($client, $reply."\n", $userinput);
   
   
     return 1;      return 1;
 }  }
 RegisterHandler("chatretr", \&RetrieveChatHandler, 0, 1, 0);  &register_handler("chatretr", \&retrieve_chat_handler, 0, 1, 0);
   
 #  #
 #  Initiate a query of an sql database.  SQL query repsonses get put in  #  Initiate a query of an sql database.  SQL query repsonses get put in
 #  a file for later retrieval.  This prevents sql query results from  #  a file for later retrieval.  This prevents sql query results from
Line 2062  RegisterHandler("chatretr", \&RetrieveCh Line 3140  RegisterHandler("chatretr", \&RetrieveCh
 # Side-effects:  # Side-effects:
 #    a reply is written to $client.  #    a reply is written to $client.
 #  #
 sub SendQueryHandler {  sub send_query_handler {
     my $cmd     = shift;      my ($cmd, $tail, $client) = @_;
     my $tail    = shift;  
     my $client  = shift;  
   
     my $userinput = "$cmd:$tail";      my $userinput = "$cmd:$tail";
   
     my ($query,$arg1,$arg2,$arg3)=split(/\:/,$tail);      my ($query,$arg1,$arg2,$arg3)=split(/\:/,$tail);
     $query=~s/\n*$//g;      $query=~s/\n*$//g;
     Reply($client, "". sqlreply("$clientname\&$query".      &Reply($client, "". &sql_reply("$clientname\&$query".
  "\&$arg1"."\&$arg2"."\&$arg3")."\n",   "\&$arg1"."\&$arg2"."\&$arg3")."\n",
   $userinput);    $userinput);
           
     return 1;      return 1;
 }  }
 RegisterHandler("querysend", \&SendQueryHandler, 0, 1, 0);  &register_handler("querysend", \&send_query_handler, 0, 1, 0);
   
 #  #
 #   Add a reply to an sql query.  SQL queries are done asyncrhonously.  #   Add a reply to an sql query.  SQL queries are done asyncrhonously.
Line 2104  RegisterHandler("querysend", \&SendQuery Line 3181  RegisterHandler("querysend", \&SendQuery
 # Side effects:  # Side effects:
 #    ok written to the client.  #    ok written to the client.
 #  #
 sub ReplyQueryHandler {  sub reply_query_handler {
     my $cmd    = shift;      my ($cmd, $tail, $client) = @_;
     my $tail   = shift;  
     my $client = shift;  
   
     my $userinput = "$cmd:$tail";      my $userinput = "$cmd:$tail";
   
Line 2121  sub ReplyQueryHandler { Line 3197  sub ReplyQueryHandler {
  my $store2=IO::File->new(">$execdir/tmp/$id.end");   my $store2=IO::File->new(">$execdir/tmp/$id.end");
  print $store2 "done\n";   print $store2 "done\n";
  close $store2;   close $store2;
  Reply($client, "ok\n", $userinput);   &Reply($client, "ok\n", $userinput);
     } else {      } else {
  Failure($client, "error: ".($!+0)   &Failure($client, "error: ".($!+0)
  ." IO::File->new Failed ".   ." IO::File->new Failed ".
  "while attempting queryreply\n", $userinput);   "while attempting queryreply\n", $userinput);
     }      }
Line 2131  sub ReplyQueryHandler { Line 3207  sub ReplyQueryHandler {
   
     return 1;      return 1;
 }  }
 RegisterHandler("queryreply", \&ReplyQueryHandler, 0, 1, 0);  &register_handler("queryreply", \&reply_query_handler, 0, 1, 0);
   
 #  #
 #  Process the courseidput query.  Not quite sure what this means  #  Process the courseidput request.  Not quite sure what this means
 #  at the system level sense.  It appears a gdbm file in the   #  at the system level sense.  It appears a gdbm file in the 
 #  /home/httpd/lonUsers/$domain/nohist_courseids is tied and  #  /home/httpd/lonUsers/$domain/nohist_courseids is tied and
 #  a set of entries made in that database.  #  a set of entries made in that database.
Line 2143  RegisterHandler("queryreply", \&ReplyQue Line 3220  RegisterHandler("queryreply", \&ReplyQue
 #   $tail     - Tail of the command.  In this case consists of a colon  #   $tail     - Tail of the command.  In this case consists of a colon
 #               separated list contaning the domain to apply this to and  #               separated list contaning the domain to apply this to and
 #               an ampersand separated list of keyword=value pairs.  #               an ampersand separated list of keyword=value pairs.
   #               Each value is a colon separated list that includes:  
   #               description, institutional code and course owner.
   #               For backward compatibility with versions included
   #               in LON-CAPA 1.1.X (and earlier) and 1.2.X, institutional
   #               code and/or course owner are preserved from the existing 
   #               record when writing a new record in response to 1.1 or 
   #               1.2 implementations of lonnet::flushcourselogs().   
   #                      
 #   $client   - Socket open on the client.  #   $client   - Socket open on the client.
 # Returns:  # Returns:
 #   1    - indicating that processing should continue  #   1    - indicating that processing should continue
Line 2150  RegisterHandler("queryreply", \&ReplyQue Line 3235  RegisterHandler("queryreply", \&ReplyQue
 # Side effects:  # Side effects:
 #   reply is written to the client.  #   reply is written to the client.
 #  #
 sub PutCourseIdHandler {  sub put_course_id_handler {
     my $cmd    = shift;      my ($cmd, $tail, $client) = @_;
     my $tail   = shift;  
     my $client = shift;  
   
     my $userinput = "$cmd:$tail";      my $userinput = "$cmd:$tail";
   
     my ($udom, $what) = split(/:/, $tail);      my ($udom, $what) = split(/:/, $tail,2);
     chomp($what);      chomp($what);
     my $now=time;      my $now=time;
     my @pairs=split(/\&/,$what);      my @pairs=split(/\&/,$what);
   
     my $hashref = TieDomainHash($udom, "nohist_courseids", &GDBM_WRCREAT());      my $hashref = &tie_domain_hash($udom, "nohist_courseids", &GDBM_WRCREAT());
     if ($hashref) {      if ($hashref) {
  foreach my $pair (@pairs) {   foreach my $pair (@pairs) {
     my ($key,$value)=split(/=/,$pair);              my ($key,$courseinfo) = split(/=/,$pair,2);
     $hashref->{$key}=$value.':'.$now;              $courseinfo =~ s/=/:/g;
   
               my @current_items = split(/:/,$hashref->{$key});
               shift(@current_items); # remove description
               pop(@current_items);   # remove last access
               my $numcurrent = scalar(@current_items);
   
               my @new_items = split(/:/,$courseinfo);
               my $numnew = scalar(@new_items);
               if ($numcurrent > 0) {
                   if ($numnew == 1) { # flushcourselogs() from 1.1 or earlier
                       $courseinfo .= ':'.join(':',@current_items);
                   } elsif ($numnew == 2) { # flushcourselogs() from 1.2.X
                       $courseinfo .= ':'.$current_items[$numcurrent-1];
                   }
               }
       $hashref->{$key}=$courseinfo.':'.$now;
  }   }
  if (untie(%$hashref)) {   if (untie(%$hashref)) {
     Reply($client, "ok\n", $userinput);      &Reply( $client, "ok\n", $userinput);
  } else {   } else {
     Failure( $client, "error: ".($!+0)      &Failure($client, "error: ".($!+0)
      ." untie(GDBM) Failed ".       ." untie(GDBM) Failed ".
      "while attempting courseidput\n", $userinput);       "while attempting courseidput\n", $userinput);
  }   }
     } else {      } else {
  Failure( $client, "error: ".($!+0)   &Failure($client, "error: ".($!+0)
  ." tie(GDBM) Failed ".   ." tie(GDBM) Failed ".
  "while attempting courseidput\n", $userinput);   "while attempting courseidput\n", $userinput);
     }      }
       
   
     return 1;      return 1;
 }  }
 RegisterHandler("courseidput", \&PutCourseIdHandler, 0, 1, 0);  &register_handler("courseidput", \&put_course_id_handler, 0, 1, 0);
   
 #  Retrieves the value of a course id resource keyword pattern  #  Retrieves the value of a course id resource keyword pattern
 #  defined since a starting date.  Both the starting date and the  #  defined since a starting date.  Both the starting date and the
Line 2203  RegisterHandler("courseidput", \&PutCour Line 3304  RegisterHandler("courseidput", \&PutCour
 #                 description - regular expression that is used to filter  #                 description - regular expression that is used to filter
 #                            the dump.  Only keywords matching this regexp  #                            the dump.  Only keywords matching this regexp
 #                            will be used.  #                            will be used.
   #                 institutional code - optional supplied code to filter 
   #                            the dump. Only courses with an institutional code 
   #                            that match the supplied code will be returned.
   #                 owner    - optional supplied username of owner to filter
   #                            the dump.  Only courses for which the course 
   #                            owner matches the supplied username will be
   #                            returned. Implicit assumption that owner
   #                            is a user in the domain in which the
   #                            course database is defined.
 #     $client  - The socket open on the client.  #     $client  - The socket open on the client.
 # Returns:  # Returns:
 #    1     - Continue processing.  #    1     - Continue processing.
 # Side Effects:  # Side Effects:
 #   a reply is written to $client.  #   a reply is written to $client.
 sub DumpCourseIdHandler {  sub dump_course_id_handler {
     my $cmd    = shift;      my ($cmd, $tail, $client) = @_;
     my $tail   = shift;  
     my $client = shift;  
   
     my $userinput = "$cmd:$tail";      my $userinput = "$cmd:$tail";
   
     my ($udom,$since,$description) =split(/:/,$tail);      my ($udom,$since,$description,$instcodefilter,$ownerfilter,$coursefilter) =split(/:/,$tail);
     if (defined($description)) {      if (defined($description)) {
  $description=&unescape($description);   $description=&unescape($description);
     } else {      } else {
  $description='.';   $description='.';
     }      }
       if (defined($instcodefilter)) {
           $instcodefilter=&unescape($instcodefilter);
       } else {
           $instcodefilter='.';
       }
       if (defined($ownerfilter)) {
           $ownerfilter=&unescape($ownerfilter);
       } else {
           $ownerfilter='.';
       }
       if (defined($coursefilter)) {
           $coursefilter=&unescape($coursefilter);
       } else {
           $coursefilter='.';
       }
   
     unless (defined($since)) { $since=0; }      unless (defined($since)) { $since=0; }
     my $qresult='';      my $qresult='';
       my $hashref = &tie_domain_hash($udom, "nohist_courseids", &GDBM_WRCREAT());
     my $hashref = TieDomainHash($udom, "nohist_courseids", &GDBM_WRCREAT());  
     if ($hashref) {      if ($hashref) {
  while (my ($key,$value) = each(%$hashref)) {   while (my ($key,$value) = each(%$hashref)) {
     my ($descr,$lasttime)=split(/\:/,$value);      my ($descr,$lasttime,$inst_code,$owner);
     if ($lasttime<$since) {               my @courseitems = split(/:/,$value);
  next;               $lasttime = pop(@courseitems);
     }      ($descr,$inst_code,$owner)=@courseitems;
     if ($description eq '.') {      if ($lasttime<$since) { next; }
  $qresult.=$key.'='.$descr.'&';              my $match = 1;
     } else {      unless ($description eq '.') {
  my $unescapeVal = &unescape($descr);   my $unescapeDescr = &unescape($descr);
  if (eval('$unescapeVal=~/$description/i')) {   unless (eval('$unescapeDescr=~/\Q$description\E/i')) {
     $qresult.="$key=$descr&";                      $match = 0;
  }   }
               }
               unless ($instcodefilter eq '.' || !defined($instcodefilter)) {
                   my $unescapeInstcode = &unescape($inst_code);
                   unless (eval('$unescapeInstcode=~/\Q$instcodefilter\E/i')) {
                       $match = 0;
                   }
     }      }
               unless ($ownerfilter eq '.' || !defined($ownerfilter)) {
                   my $unescapeOwner = &unescape($owner);
                   unless (eval('$unescapeOwner=~/\Q$ownerfilter\E/i')) {
                       $match = 0;
                   }
               }
               unless ($coursefilter eq '.' || !defined($coursefilter)) {
                   my $unescapeCourse = &unescape($key);
                   unless (eval('$unescapeCourse=~/^$udom(_)\Q$coursefilter\E$/')) {
                       $match = 0;
                   }
               }
               if ($match == 1) {
                   $qresult.=$key.'='.$descr.':'.$inst_code.':'.$owner.'&';
               }
  }   }
  if (untie(%$hashref)) {   if (untie(%$hashref)) {
     chop($qresult);      chop($qresult);
     Reply($client, "$qresult\n", $userinput);      &Reply($client, "$qresult\n", $userinput);
  } else {   } else {
     Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".      &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
     "while attempting courseiddump\n", $userinput);      "while attempting courseiddump\n", $userinput);
  }   }
     } else {      } else {
  Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".   &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
  "while attempting courseiddump\n", $userinput);   "while attempting courseiddump\n", $userinput);
     }      }
   
   
     return 1;      return 1;
 }  }
 RegisterHandler("courseiddump", \&DumpCourseIdHandler, 0, 1, 0);  &register_handler("courseiddump", \&dump_course_id_handler, 0, 1, 0);
   
 #  #
 #  Puts an id to a domains id database.   #  Puts an id to a domains id database. 
 #  #
Line 2272  RegisterHandler("courseiddump", \&DumpCo Line 3417  RegisterHandler("courseiddump", \&DumpCo
 #  Side effects:  #  Side effects:
 #     reply is written to $client.  #     reply is written to $client.
 #  #
 sub PutIdHandler {  sub put_id_handler {
     my $cmd    = shift;      my ($cmd,$tail,$client) = @_;
     my $tail   = shift;  
     my $client = shift;  
   
     my $userinput = "$cmd:$tail";      my $userinput = "$cmd:$tail";
   
     my ($udom,$what)=split(/:/,$tail);      my ($udom,$what)=split(/:/,$tail);
     chomp($what);      chomp($what);
     my @pairs=split(/\&/,$what);      my @pairs=split(/\&/,$what);
     my $hashref = TieDomainHash($udom, "ids", &GDBM_WRCREAT(),      my $hashref = &tie_domain_hash($udom, "ids", &GDBM_WRCREAT(),
  "P", $what);     "P", $what);
     if ($hashref) {      if ($hashref) {
  foreach my $pair (@pairs) {   foreach my $pair (@pairs) {
     my ($key,$value)=split(/=/,$pair);      my ($key,$value)=split(/=/,$pair);
     $hashref->{$key}=$value;      $hashref->{$key}=$value;
  }   }
  if (untie(%$hashref)) {   if (untie(%$hashref)) {
     Reply($client, "ok\n", $userinput);      &Reply($client, "ok\n", $userinput);
  } else {   } else {
     Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".      &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
     "while attempting idput\n", $userinput);       "while attempting idput\n", $userinput);
  }   }
     } else {      } else {
  Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".   &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
  "while attempting idput\n", $userinput);    "while attempting idput\n", $userinput);
     }      }
   
     return 1;      return 1;
 }  }
   &register_handler("idput", \&put_id_handler, 0, 1, 0);
   
 RegisterHandler("idput", \&PutIdHandler, 0, 1, 0);  
 #  #
 #  Retrieves a set of id values from the id database.  #  Retrieves a set of id values from the id database.
 #  Returns an & separated list of results, one for each requested id to the  #  Returns an & separated list of results, one for each requested id to the
Line 2323  RegisterHandler("idput", \&PutIdHandler, Line 3467  RegisterHandler("idput", \&PutIdHandler,
 # Side effects:  # Side effects:
 #   An & separated list of results is written to $client.  #   An & separated list of results is written to $client.
 #  #
 sub GetIdHandler {  sub get_id_handler {
     my $cmd    = shift;      my ($cmd, $tail, $client) = @_;
     my $tail   = shift;  
     my $client = shift;  
           
     my $userinput = "$client:$tail";      my $userinput = "$client:$tail";
           
Line 2334  sub GetIdHandler { Line 3477  sub GetIdHandler {
     chomp($what);      chomp($what);
     my @queries=split(/\&/,$what);      my @queries=split(/\&/,$what);
     my $qresult='';      my $qresult='';
     my $hashref = TieDomainHash($udom, "ids", &GDBM_READER());      my $hashref = &tie_domain_hash($udom, "ids", &GDBM_READER());
     if ($hashref) {      if ($hashref) {
  for (my $i=0;$i<=$#queries;$i++) {   for (my $i=0;$i<=$#queries;$i++) {
     $qresult.="$hashref->{$queries[$i]}&";      $qresult.="$hashref->{$queries[$i]}&";
  }   }
  if (untie(%$hashref)) {   if (untie(%$hashref)) {
     $qresult=~s/\&$//;      $qresult=~s/\&$//;
     Reply($client, "$qresult\n", $userinput);      &Reply($client, "$qresult\n", $userinput);
  } else {   } else {
     Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ".      &Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ".
      "while attempting idget\n",$userinput);        "while attempting idget\n",$userinput);
  }   }
     } else {      } else {
  Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".   &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
  "while attempting idget\n",$userinput);   "while attempting idget\n",$userinput);
     }      }
           
     return 1;      return 1;
 }  }
   &register_handler("idget", \&get_id_handler, 0, 1, 0);
   
 RegisterHandler("idget", \&GetIdHandler, 0, 1, 0);  
 #  #
 #  Process the tmpput command I'm not sure what this does.. Seems to  #  Process the tmpput command I'm not sure what this does.. Seems to
 #  create a file in the lonDaemons/tmp directory of the form $id.tmp  #  create a file in the lonDaemons/tmp directory of the form $id.tmp
Line 2372  RegisterHandler("idget", \&GetIdHandler, Line 3515  RegisterHandler("idget", \&GetIdHandler,
 # Side effects:  # Side effects:
 #   A file is created in the local filesystem.  #   A file is created in the local filesystem.
 #   A reply is sent to the client.  #   A reply is sent to the client.
 sub TmpPutHandler {  sub tmp_put_handler {
     my $cmd       = shift;      my ($cmd, $what, $client) = @_;
     my $what      = shift;  
     my $client    = shift;  
   
     my $userinput = "$cmd:$what"; # Reconstruct for logging.      my $userinput = "$cmd:$what"; # Reconstruct for logging.
   
Line 2389  sub TmpPutHandler { Line 3530  sub TmpPutHandler {
     if ($store=IO::File->new(">$execdir/tmp/$id.tmp")) {      if ($store=IO::File->new(">$execdir/tmp/$id.tmp")) {
  print $store $what;   print $store $what;
  close $store;   close $store;
  Reply($client, "$id\n", $userinput);   &Reply($client, "$id\n", $userinput);
     } else {      } else {
  Failure( $client, "error: ".($!+0)."IO::File->new Failed ".   &Failure( $client, "error: ".($!+0)."IO::File->new Failed ".
  "while attempting tmpput\n", $userinput);    "while attempting tmpput\n", $userinput);
     }      }
     return 1;      return 1;
       
 }  }
 RegisterHandler("tmpput", \&TmpPutHandler, 0, 1, 0);  &register_handler("tmpput", \&tmp_put_handler, 0, 1, 0);
   
 #   Processes the tmpget command.  This command returns the contents  #   Processes the tmpget command.  This command returns the contents
 #  of a temporary resource file(?) created via tmpput.  #  of a temporary resource file(?) created via tmpput.
Line 2411  RegisterHandler("tmpput", \&TmpPutHandle Line 3552  RegisterHandler("tmpput", \&TmpPutHandle
 #    1         - Inidcating processing can continue.  #    1         - Inidcating processing can continue.
 # Side effects:  # Side effects:
 #   A reply is sent to the client.  #   A reply is sent to the client.
   
 #  #
 sub TmpGetHandler {  sub tmp_get_handler {
     my $cmd       = shift;      my ($cmd, $id, $client) = @_;
     my $id        = shift;  
     my $client    = shift;  
     my $userinput = "$cmd:$id";       my $userinput = "$cmd:$id"; 
           
     chomp($id);  
     $id=~s/\W/\_/g;      $id=~s/\W/\_/g;
     my $store;      my $store;
     my $execdir=$perlvar{'lonDaemons'};      my $execdir=$perlvar{'lonDaemons'};
     if ($store=IO::File->new("$execdir/tmp/$id.tmp")) {      if ($store=IO::File->new("$execdir/tmp/$id.tmp")) {
  my $reply=<$store>;   my $reply=<$store>;
  Reply( $client, "$reply\n", $userinput);   &Reply( $client, "$reply\n", $userinput);
  close $store;   close $store;
     } else {      } else {
  Failure( $client, "error: ".($!+0)."IO::File->new Failed ".   &Failure( $client, "error: ".($!+0)."IO::File->new Failed ".
  "while attempting tmpget\n", $userinput);    "while attempting tmpget\n", $userinput);
     }      }
   
     return 1;      return 1;
 }  }
 RegisterHandler("tmpget", \&TmpGetHandler, 0, 1, 0);  &register_handler("tmpget", \&tmp_get_handler, 0, 1, 0);
   
 #  #
 #  Process the tmpdel command.  This command deletes a temp resource  #  Process the tmpdel command.  This command deletes a temp resource
 #  created by the tmpput command.  #  created by the tmpput command.
Line 2449  RegisterHandler("tmpget", \&TmpGetHandle Line 3589  RegisterHandler("tmpget", \&TmpGetHandle
 # Side Effects:  # Side Effects:
 #   A file is deleted  #   A file is deleted
 #   A reply is sent to the client.  #   A reply is sent to the client.
 sub TmpDelHandler {  sub tmp_del_handler {
     my $cmd      = shift;      my ($cmd, $id, $client) = @_;
     my $id       = shift;  
     my $client   = shift;  
           
     my $userinput= "$cmd:$id";      my $userinput= "$cmd:$id";
           
Line 2460  sub TmpDelHandler { Line 3598  sub TmpDelHandler {
     $id=~s/\W/\_/g;      $id=~s/\W/\_/g;
     my $execdir=$perlvar{'lonDaemons'};      my $execdir=$perlvar{'lonDaemons'};
     if (unlink("$execdir/tmp/$id.tmp")) {      if (unlink("$execdir/tmp/$id.tmp")) {
  Reply($client, "ok\n", $userinput);   &Reply($client, "ok\n", $userinput);
     } else {      } else {
  Failure( $client, "error: ".($!+0)."Unlink tmp Failed ".   &Failure( $client, "error: ".($!+0)."Unlink tmp Failed ".
  "while attempting tmpdel\n", $userinput);    "while attempting tmpdel\n", $userinput);
     }      }
           
     return 1;      return 1;
   
 }  }
 RegisterHandler("tmpdel", \&TmpDelHandler, 0, 1, 0);  &register_handler("tmpdel", \&tmp_del_handler, 0, 1, 0);
 #  
 #   ls  - list the contents of a directory.  For each file in the  
 #    selected directory the filename followed by the full output of  
 #    the stat function is returned.  The returned info for each  
 #    file are separated by ':'.  The stat fields are separated by &'s.  
 # Parameters:  
 #    $cmd        - The command that dispatched us (ls).  
 #    $ulsdir     - The directory path to list... I'm not sure what this  
 #                  is relative as things like ls:. return e.g.  
 #                  no_such_dir.  
 #    $client     - Socket open on the client.  
 # Returns:  
 #     1 - indicating that the daemon should not disconnect.  
 # Side Effects:  
 #   The reply is written to  $client.  
 #  
 sub LsHandler {  
     my $cmd     = shift;  
     my $ulsdir  = shift;  
     my $client  = shift;  
   
     my $userinput = "$cmd:$ulsdir";  
   
     my $ulsout='';  
     my $ulsfn;  
     if (-e $ulsdir) {  
  if(-d $ulsdir) {  
     if (opendir(LSDIR,$ulsdir)) {  
  while ($ulsfn=readdir(LSDIR)) {  
     my @ulsstats=stat($ulsdir.'/'.$ulsfn);  
     $ulsout.=$ulsfn.'&'.  
  join('&',@ulsstats).':';  
  }  
  closedir(LSDIR);  
     }  
  } else {  
     my @ulsstats=stat($ulsdir);  
     $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':';  
  }  
     } else {  
  $ulsout='no_such_dir';  
     }  
     if ($ulsout eq '') { $ulsout='empty'; }  
     Reply($client, "$ulsout\n", $userinput);  
   
   
     return 1;  
 }  
 RegisterHandler("ls", \&LsHandler, 0, 1, 0);  
   
   
 #  #
 #   Processes the setannounce command.  This command  #   Processes the setannounce command.  This command
Line 2540  RegisterHandler("ls", \&LsHandler, 0, 1, Line 3628  RegisterHandler("ls", \&LsHandler, 0, 1,
 #   The file {DocRoot}/announcement.txt is created.  #   The file {DocRoot}/announcement.txt is created.
 #   A reply is sent to $client.  #   A reply is sent to $client.
 #  #
 sub SetAnnounceHandler {  sub set_announce_handler {
     my $cmd          = shift;      my ($cmd, $announcement, $client) = @_;
     my $announcement = shift;  
     my $client       = shift;  
       
     my $userinput    = "$cmd:$announcement";      my $userinput    = "$cmd:$announcement";
   
Line 2553  sub SetAnnounceHandler { Line 3639  sub SetAnnounceHandler {
  '/announcement.txt')) {   '/announcement.txt')) {
  print $store $announcement;   print $store $announcement;
  close $store;   close $store;
  Reply($client, "ok\n", $userinput);   &Reply($client, "ok\n", $userinput);
     } else {      } else {
  Failure($client, "error: ".($!+0)."\n", $userinput);   &Failure($client, "error: ".($!+0)."\n", $userinput);
     }      }
   
     return 1;      return 1;
 }  }
 RegisterHandler("setannounce", \&SetAnnounceHandler, 0, 1, 0);  &register_handler("setannounce", \&set_announce_handler, 0, 1, 0);
   
 #  #
 #  Return the version of the daemon.  This can be used to determine  #  Return the version of the daemon.  This can be used to determine
Line 2575  RegisterHandler("setannounce", \&SetAnno Line 3661  RegisterHandler("setannounce", \&SetAnno
 #   1 - continue processing requests.  #   1 - continue processing requests.
 # Side Effects:  # Side Effects:
 #   Replies with version to $client.  #   Replies with version to $client.
 sub GetVersionHandler {  sub get_version_handler {
     my $client     = shift;      my ($cmd, $tail, $client) = @_;
     my $tail       = shift;  
     my $client     = shift;      my $userinput  = $cmd.$tail;
     my $userinput  = $client;  
           
     Reply($client, &version($userinput)."\n", $userinput);      &Reply($client, &version($userinput)."\n", $userinput);
   
   
     return 1;      return 1;
 }  }
 RegisterHandler("version", \&GetVersionHandler, 0, 1, 0);  &register_handler("version", \&get_version_handler, 0, 1, 0);
   
 #  Set the current host and domain.  This is used to support  #  Set the current host and domain.  This is used to support
 #  multihomed systems.  Each IP of the system, or even separate daemons  #  multihomed systems.  Each IP of the system, or even separate daemons
Line 2605  RegisterHandler("version", \&GetVersionH Line 3690  RegisterHandler("version", \&GetVersionH
 #     The default domain/system context is modified for this daemon.  #     The default domain/system context is modified for this daemon.
 #     a reply is sent to the client.  #     a reply is sent to the client.
 #  #
 sub SelectHostHandler {  sub set_virtual_host_handler {
     my $cmd        = shift;      my ($cmd, $tail, $socket) = @_;
     my $tail       = shift;  
     my $socket     = shift;  
       
     my $userinput  ="$cmd:$tail";      my $userinput  ="$cmd:$tail";
   
     Reply($client, &sethost($userinput)."\n", $userinput);      &Reply($client, &sethost($userinput)."\n", $userinput);
   
   
     return 1;      return 1;
 }  }
 RegisterHandler("sethost", \&SelectHostHandler, 0, 1, 0);  &register_handler("sethost", \&set_virtual_host_handler, 0, 1, 0);
   
 #  Process a request to exit:  #  Process a request to exit:
 #   - "bye" is sent to the client.  #   - "bye" is sent to the client.
Line 2630  RegisterHandler("sethost", \&SelectHostH Line 3713  RegisterHandler("sethost", \&SelectHostH
 # Returns:  # Returns:
 #   0      - Indicating the program should exit!!  #   0      - Indicating the program should exit!!
 #  #
 sub ExitHandler {  sub exit_handler {
     my $cmd     = shift;      my ($cmd, $tail, $client) = @_;
     my $tail    = shift;  
     my $client  = shift;  
   
     my $userinput = "$cmd:$tail";      my $userinput = "$cmd:$tail";
   
     &logthis("Client $clientip ($clientname) hanging up: $userinput");      &logthis("Client $clientip ($clientname) hanging up: $userinput");
     Reply($client, "bye\n", $userinput);      &Reply($client, "bye\n", $userinput);
     $client->shutdown(2);        # shutdown the socket forcibly.      $client->shutdown(2);        # shutdown the socket forcibly.
     $client->close();      $client->close();
   
     return 0;      return 0;
 }  }
 RegisterHandler("exit", \&ExitHandler, 0, 1,1);  &register_handler("exit", \&exit_handler, 0,1,1);
 RegisterHandler("init", \&ExitHandler, 0, 1,1); # RE-init is like exit.  &register_handler("init", \&exit_handler, 0,1,1);
 RegisterHandler("quit", \&ExitHandler, 0, 1,1); # I like this too!  &register_handler("quit", \&exit_handler, 0,1,1);
 #------------------------------------------------------------------------------------  
 #  #  Determine if auto-enrollment is enabled.
 #   Process a Request.  Takes a request from the client validates  #  Note that the original had what I believe to be a defect.
 #   it and performs the operation requested by it.  Returns  #  The original returned 0 if the requestor was not a registerd client.
 #   a response to the client.  #  It should return "refused".
 #  # Formal Parameters:
 #  Parameters:  #   $cmd       - The command that invoked us.
 #      request      - A string containing the user's request.  #   $tail      - The tail of the command (Extra command parameters.
 #  Returns:  #   $client    - The socket open on the client that issued the request.
 #      0            - Requested to exit, caller should shut down.  # Returns:
 #      1            - Accept additional requests from the client.  #    1         - Indicating processing should continue.
 #  #
 sub ProcessRequest {  sub enrollment_enabled_handler {
     my $Request      = shift;      my ($cmd, $tail, $client) = @_;
     my $KeepGoing    = 1; # Assume we're not asked to stop.      my $userinput = $cmd.":".$tail; # For logging purposes.
       
     my $wasenc=0;  
     my $userinput = $Request;   # for compatibility with oldcode <yeach>  
   
       
       my $cdom = split(/:/, $tail);   # Domain we're asking about.
       my $outcome  = &localenroll::run($cdom);
       &Reply($client, "$outcome\n", $userinput);
   
 # ------------------------------------------------------------ See if encrypted      return 1;
      }
     if($userinput =~ /^enc/) {  &register_handler("autorun", \&enrollment_enabled_handler, 0, 1, 0);
  $wasenc = 1;  
  $userinput = Decipher($userinput);  
  if(! $userinput) {  
     Failure($client,"error:Encrypted data without negotiating key");  
     return 0;                      # Break off with this imposter.  
  }  
     }  
     # Split off the request keyword from the rest of the stuff.  
      
     my ($command, $tail) = split(/:/, $userinput, 2);  
   
     Debug("Command received: $command, encoded = $wasenc");  #   Get the official sections for which auto-enrollment is possible.
   #   Since the admin people won't know about 'unofficial sections' 
   #   we cannot auto-enroll on them.
   # Formal Parameters:
   #    $cmd     - The command request that got us dispatched here.
   #    $tail    - The remainder of the request.  In our case this
   #               will be split into:
   #               $coursecode   - The course name from the admin point of view.
   #               $cdom         - The course's domain(?).
   #    $client  - Socket open on the client.
   # Returns:
   #    1    - Indiciting processing should continue.
   #
   sub get_sections_handler {
       my ($cmd, $tail, $client) = @_;
       my $userinput = "$cmd:$tail";
   
          my ($coursecode, $cdom) = split(/:/, $tail);
 # ------------------------------------------------------------- Normal commands      my @secs = &localenroll::get_sections($coursecode,$cdom);
       my $seclist = &escape(join(':',@secs));
   
     #       &Reply($client, "$seclist\n", $userinput);
     #   If the command is in the hash, then execute it via the hash dispatch:      
     #  
     if(defined $Dispatcher{$command}) {  
   
  my $DispatchInfo = $Dispatcher{$command};      return 1;
  my $Handler      = $$DispatchInfo[0];  }
  my $NeedEncode   = $$DispatchInfo[1];  &register_handler("autogetsections", \&get_sections_handler, 0, 1, 0);
  my $ClientTypes  = $$DispatchInfo[2];  
  Debug("Matched dispatch hash: mustencode: $NeedEncode ClientType $ClientTypes");  
         
  #  Validate the request:  
         
  my $ok = 1;  
  my $requesterprivs = 0;  
  if(isClient()) {  
     $requesterprivs |= $CLIENT_OK;  
  }  
  if(isManager()) {  
     $requesterprivs |= $MANAGER_OK;  
  }  
  if($NeedEncode && (!$wasenc)) {  
     Debug("Must encode but wasn't: $NeedEncode $wasenc");  
     $ok = 0;  
  }  
  if(($ClientTypes & $requesterprivs) == 0) {  
     Debug("Client not privileged to do this operation");  
     $ok = 0;  
  }  
   
  if($ok) {  #   Validate the owner of a new course section.  
     Debug("Dispatching to handler $command $tail");  #
     $KeepGoing = &$Handler($command, $tail, $client);  # Formal Parameters:
  } else {  #   $cmd      - Command that got us dispatched.
     Debug("Refusing to dispatch because ok is false");  #   $tail     - the remainder of the command.  For us this consists of a
     Failure($client, "refused", $userinput);  #               colon separated string containing:
  }  #                  $inst    - Course Id from the institutions point of view.
   #                  $owner   - Proposed owner of the course.
   #                  $cdom    - Domain of the course (from the institutions
   #                             point of view?)..
   #   $client   - Socket open on the client.
   #
   # Returns:
   #   1        - Processing should continue.
   #
   sub validate_course_owner_handler {
       my ($cmd, $tail, $client)  = @_;
       my $userinput = "$cmd:$tail";
       my ($inst_course_id, $owner, $cdom) = split(/:/, $tail);
   
       my $outcome = &localenroll::new_course($inst_course_id,$owner,$cdom);
       &Reply($client, "$outcome\n", $userinput);
   
 # ------------------------------------------------------------- unknown command  
   
     } else {  
  # unknown command  
  Failure($client, "unknown_cmd\n", $userinput);  
     }  
   
     return $KeepGoing;      return 1;
 }  }
   &register_handler("autonewcourse", \&validate_course_owner_handler, 0, 1, 0);
   
 #  #
 #   GetCertificate: Given a transaction that requires a certificate,  #   Validate a course section in the official schedule of classes
 #   this function will extract the certificate from the transaction  #   from the institutions point of view (part of autoenrollment).
 #   request.  Note that at this point, the only concept of a certificate  
 #   is the hostname to which we are connected.  
 #  #
 #   Parameter:  # Formal Parameters:
 #      request   - The request sent by our client (this parameterization may  #   $cmd          - The command request that got us dispatched.
 #                  need to change when we really use a certificate granting  #   $tail         - The tail of the command.  In this case,
 #                  authority.  #                   this is a colon separated set of words that will be split
   #                   into:
   #                        $inst_course_id - The course/section id from the
   #                                          institutions point of view.
   #                        $cdom           - The domain from the institutions
   #                                          point of view.
   #   $client       - Socket open on the client.
   # Returns:
   #    1           - Indicating processing should continue.
 #  #
 sub GetCertificate {  sub validate_course_section_handler {
     my $request = shift;      my ($cmd, $tail, $client) = @_;
       my $userinput = "$cmd:$tail";
       my ($inst_course_id, $cdom) = split(/:/, $tail);
   
     return $clientip;      my $outcome=&localenroll::validate_courseID($inst_course_id,$cdom);
 }      &Reply($client, "$outcome\n", $userinput);
   
   
       return 1;
   }
   &register_handler("autovalidatecourse", \&validate_course_section_handler, 0, 1, 0);
   
 #  #
 #   ReadManagerTable: Reads in the current manager table. For now this is  #   Create a password for a new auto-enrollment user.
 #                     done on each manager authentication because:  #   I think/guess, this password allows access to the institutions 
 #                     - These authentications are not frequent  #   AIS class list server/services.  Stuart can correct this comment
 #                     - This allows dynamic changes to the manager table  #   when he finds out how wrong I am.
 #                       without the need to signal to the lond.  
 #  #
   # Formal Parameters:
   #    $cmd     - The command request that got us dispatched.
   #    $tail    - The tail of the command.   In this case this is a colon separated
   #               set of words that will be split into:
   #               $authparam - An authentication parameter (username??).
   #               $cdom      - The domain of the course from the institution's
   #                            point of view.
   #    $client  - The socket open on the client.
   # Returns:
   #    1 - continue processing.
   #
   sub create_auto_enroll_password_handler {
       my ($cmd, $tail, $client) = @_;
       my $userinput = "$cmd:$tail";
   
 sub ReadManagerTable {      my ($authparam, $cdom) = split(/:/, $userinput);
   
     #   Clean out the old table first..      my ($create_passwd,$authchk);
       ($authparam,
        $create_passwd,
        $authchk) = &localenroll::create_password($authparam,$cdom);
   
     foreach my $key (keys %managers) {      &Reply($client, &escape($authparam.':'.$create_passwd.':'.$authchk)."\n",
  delete $managers{$key};     $userinput);
     }  
   
     my $tablename = $perlvar{'lonTabDir'}."/managers.tab";  
     if (!open (MANAGERS, $tablename)) {      return 1;
  logthis('<font color="red">No manager table.  Nobody can manage!!</font>');  
  return;  
     }  
     while(my $host = <MANAGERS>) {  
  chomp($host);  
  if ($host =~ "^#") {                  # Comment line.  
     logthis('<font color="green"> Skipping line: '. "$host</font>\n");  
     next;  
  }  
  if (!defined $hostip{$host}) { # This is a non cluster member  
     #  The entry is of the form:  
     #    cluname:hostname  
     #  cluname - A 'cluster hostname' is needed in order to negotiate  
     #            the host key.  
     #  hostname- The dns name of the host.  
     #  
     my($cluname, $dnsname) = split(/:/, $host);  
       
     my $ip = gethostbyname($dnsname);  
     if(defined($ip)) {                 # bad names don't deserve entry.  
  my $hostip = inet_ntoa($ip);  
  $managers{$hostip} = $cluname;  
  logthis('<font color="green"> registering manager '.  
  "$dnsname as $cluname with $hostip </font>\n");  
     }  
  } else {  
     logthis('<font color="green"> existing host'." $host</font>\n");  
     $managers{$hostip{$host}} = $host;  # Use info from cluster tab if clumemeber  
  }  
     }  
 }  }
   &register_handler("autocreatepassword", \&create_auto_enroll_password_handler, 
     0, 1, 0);
   
   #   Retrieve and remove temporary files created by/during autoenrollment.
 #  #
 #  ValidManager: Determines if a given certificate represents a valid manager.  # Formal Parameters:
 #                in this primitive implementation, the 'certificate' is  #    $cmd      - The command that got us dispatched.
 #                just the connecting loncapa client name.  This is checked  #    $tail     - The tail of the command.  In our case this is a colon 
 #                against a valid client list in the configuration.  #                separated list that will be split into:
   #                $filename - The name of the file to remove.
   #                            The filename is given as a path relative to
   #                            the LonCAPA temp file directory.
   #    $client   - Socket open on the client.
 #  #
 #                    # Returns:
 sub ValidManager {  #   1     - Continue processing.
     my $certificate = shift;   sub retrieve_auto_file_handler {
       my ($cmd, $tail, $client)    = @_;
       my $userinput                = "cmd:$tail";
   
       my ($filename)   = split(/:/, $tail);
   
       my $source = $perlvar{'lonDaemons'}.'/tmp/'.$filename;
       if ( (-e $source) && ($filename ne '') ) {
    my $reply = '';
    if (open(my $fh,$source)) {
       while (<$fh>) {
    chomp($_);
    $_ =~ s/^\s+//g;
    $_ =~ s/\s+$//g;
    $reply .= $_;
       }
       close($fh);
       &Reply($client, &escape($reply)."\n", $userinput);
   
     return isManager;  #   Does this have to be uncommented??!?  (RF).
 }  
 #  
 #  CopyFile:  Called as part of the process of installing a   
 #             new configuration file.  This function copies an existing  
 #             file to a backup file.  
 # Parameters:  
 #     oldfile  - Name of the file to backup.  
 #     newfile  - Name of the backup file.  
 # Return:  
 #     0   - Failure (errno has failure reason).  
 #     1   - Success.  
 #  #
 sub CopyFile {  #                                unlink($source);
     my $oldfile = shift;   } else {
     my $newfile = shift;      &Failure($client, "error\n", $userinput);
   
     #  The file must exist:  
   
     if(-e $oldfile) {  
   
  # Read the old file.  
   
  my $oldfh = IO::File->new("< $oldfile");  
  if(!$oldfh) {  
     return 0;  
  }  
  my @contents = <$oldfh>;  # Suck in the entire file.  
   
  # write the backup file:  
   
  my $newfh = IO::File->new("> $newfile");  
  if(!(defined $newfh)){  
     return 0;  
  }  
  my $lines = scalar @contents;  
  for (my $i =0; $i < $lines; $i++) {  
     print $newfh ($contents[$i]);  
  }   }
   
  $oldfh->close;  
  $newfh->close;  
   
  chmod(0660, $newfile);  
   
  return 1;  
       
     } else {      } else {
  return 0;   &Failure($client, "error\n", $userinput);
     }      }
       
   
       return 1;
 }  }
   &register_handler("autoretrieve", \&retrieve_auto_file_handler, 0,1,0);
   
 #  #
 #  Host files are passed out with externally visible host IPs.  #   Read and retrieve institutional code format (for support form).
 #  If, for example, we are behind a fire-wall or NAT host, our   # Formal Parameters:
 #  internally visible IP may be different than the externally  #    $cmd        - Command that dispatched us.
 #  visible IP.  Therefore, we always adjust the contents of the  #    $tail       - Tail of the command.  In this case it conatins 
 #  host file so that the entry for ME is the IP that we believe  #                  the course domain and the coursename.
 #  we have.  At present, this is defined as the entry that  #    $client     - Socket open on the client.
 #  DNS has for us.  If by some chance we are not able to get a  
 #  DNS translation for us, then we assume that the host.tab file  
 #  is correct.    
 #    BUGBUGBUG - in the future, we really should see if we can  
 #       easily query the interface(s) instead.  
 # Parameter(s):  
 #     contents    - The contents of the host.tab to check.  
 # Returns:  # Returns:
 #     newcontents - The adjusted contents.  #    1     - Continue processing.
 #  #
   sub get_institutional_code_format_handler {
       my ($cmd, $tail, $client)   = @_;
       my $userinput               = "$cmd:$tail";
   
       my $reply;
       my($cdom,$course) = split(/:/,$tail);
       my @pairs = split/\&/,$course;
       my %instcodes = ();
       my %codes = ();
       my @codetitles = ();
       my %cat_titles = ();
       my %cat_order = ();
       foreach (@pairs) {
    my ($key,$value) = split/=/,$_;
    $instcodes{&unescape($key)} = &unescape($value);
       }
       my $formatreply = &localenroll::instcode_format($cdom,
       \%instcodes,
       \%codes,
       \@codetitles,
       \%cat_titles,
       \%cat_order);
       if ($formatreply eq 'ok') {
    my $codes_str = &hash2str(%codes);
    my $codetitles_str = &array2str(@codetitles);
    my $cat_titles_str = &hash2str(%cat_titles);
    my $cat_order_str = &hash2str(%cat_order);
    &Reply($client,
          $codes_str.':'.$codetitles_str.':'.$cat_titles_str.':'
          .$cat_order_str."\n",
          $userinput);
       } else {
    # this else branch added by RF since if not ok, lonc will
    # hang waiting on reply until timeout.
    #
    &Reply($client, "format_error\n", $userinput);
       }
       
       return 1;
   }
   &register_handler("autoinstcodeformat",
     \&get_institutional_code_format_handler,0,1,0);
   
 #  #
 sub AdjustHostContents {  # Gets a student's photo to exist (in the correct image type) in the user's 
     my $contents  = shift;  # directory.
     my $adjusted;  # Formal Parameters:
     my $me        = $perlvar{'lonHostID'};  #    $cmd     - The command request that got us dispatched.
   #    $tail    - A colon separated set of words that will be split into:
   #               $domain - student's domain
   #               $uname  - student username
   #               $type   - image type desired
   #    $client  - The socket open on the client.
   # Returns:
   #    1 - continue processing.
   sub student_photo_handler {
       my ($cmd, $tail, $client) = @_;
       my ($domain,$uname,$type) = split(/:/, $tail);
   
       my $path=&propath($domain,$uname).
    '/userfiles/internal/studentphoto.'.$type;
       if (-e $path) {
    &Reply($client,"ok\n","$cmd:$tail");
    return 1;
       }
       &mkpath($path);
       my $file=&localstudentphoto::fetch($domain,$uname);
       if (!$file) {
    &Failure($client,"unavailable\n","$cmd:$tail");
    return 1;
       }
       if (!-e $path) { &convert_photo($file,$path); }
       if (-e $path) {
    &Reply($client,"ok\n","$cmd:$tail");
    return 1;
       }
       &Failure($client,"unable_to_convert\n","$cmd:$tail");
       return 1;
   }
   &register_handler("studentphoto", \&student_photo_handler, 0, 1, 0);
   
     foreach my $line (split(/\n/,$contents)) {  # mkpath makes all directories for a file, expects an absolute path with a
  if(!(($line eq "") || ($line =~ /^ *\#/) || ($line =~ /^ *$/))) {  # file or a trailing / if just a dir is passed
     chomp($line);  # returns 1 on success 0 on failure
     my ($id,$domain,$role,$name,$ip,$maxcon,$idleto,$mincon)=split(/:/,$line);  sub mkpath {
     if ($id eq $me) {      my ($file)=@_;
  my $ip = gethostbyname($name);      my @parts=split(/\//,$file,-1);
  my $ipnew = inet_ntoa($ip);      my $now=$parts[0].'/'.$parts[1].'/'.$parts[2];
  $ip = $ipnew;      for (my $i=3;$i<= ($#parts-1);$i++) {
  #  Reconstruct the host line and append to adjusted:   $now.='/'.$parts[$i]; 
    if (!-e $now) {
  my $newline = "$id:$domain:$role:$name:$ip";      if  (!mkdir($now,0770)) { return 0; }
  if($maxcon ne "") { # Not all hosts have loncnew tuning params  
     $newline .= ":$maxcon:$idleto:$mincon";  
  }  
  $adjusted .= $newline."\n";  
   
     } else { # Not me, pass unmodified.  
  $adjusted .= $line."\n";  
     }  
  } else {                  # Blank or comment never re-written.  
     $adjusted .= $line."\n"; # Pass blanks and comments as is.  
  }   }
     }      }
     return $adjusted;      return 1;
 }  }
   
   #---------------------------------------------------------------
 #  #
 #   InstallFile: Called to install an administrative file:  #   Getting, decoding and dispatching requests:
 #       - The file is created with <name>.tmp  
 #       - The <name>.tmp file is then mv'd to <name>  
 #   This lugubrious procedure is done to ensure that we are never without  
 #   a valid, even if dated, version of the file regardless of who crashes  
 #   and when the crash occurs.  
 #  #
 #  Parameters:  
 #       Name of the file  
 #       File Contents.  
 #  Return:  
 #      nonzero - success.  
 #      0       - failure and $! has an errno.  
 #  #
 sub InstallFile {  #   Get a Request:
     my $Filename = shift;  #   Gets a Request message from the client.  The transaction
     my $Contents = shift;  #   is defined as a 'line' of text.  We remove the new line
     my $TempFile = $Filename.".tmp";  #   from the text line.  
   #
     #  Open the file for write:  sub get_request {
           my $input = <$client>;
     my $fh = IO::File->new("> $TempFile"); # Write to temp.      chomp($input);
     if(!(defined $fh)) {  
  &logthis('<font color="red"> Unable to create '.$TempFile."</font>");  
  return 0;  
     }  
     #  write the contents of the file:  
       
     print $fh ($Contents);   
     $fh->close; # In case we ever have a filesystem w. locking  
   
     chmod(0660, $TempFile);      &Debug("get_request: Request = $input\n");
   
     # Now we can move install the file in position.      &status('Processing '.$clientname.':'.$input);
       
     move($TempFile, $Filename);  
   
     return 1;      return $input;
 }  }
   #---------------------------------------------------------------
 #  #
 #   ConfigFileFromSelector: converts a configuration file selector  #  Process a request.  This sub should shrink as each action
 #                 (one of host or domain at this point) into a   #  gets farmed out into a separat sub that is registered 
 #                 configuration file pathname.  #  with the dispatch hash.  
 #  #
 #  Parameters:  # Parameters:
 #      selector  - Configuration file selector.  #    user_input   - The request received from the client (lonc).
 #  Returns:  # Returns:
 #      Full path to the file or undef if the selector is invalid.  #    true to keep processing, false if caller should exit.
 #  #
 sub ConfigFileFromSelector {  sub process_request {
     my $selector   = shift;      my ($userinput) = @_;      # Easier for now to break style than to
     my $tablefile;                                  # fix all the userinput -> user_input.
       my $wasenc    = 0; # True if request was encrypted.
     my $tabledir = $perlvar{'lonTabDir'}.'/';  # ------------------------------------------------------------ See if encrypted
     if ($selector eq "hosts") {      if ($userinput =~ /^enc/) {
  $tablefile = $tabledir."hosts.tab";   $userinput = decipher($userinput);
     } elsif ($selector eq "domain") {   $wasenc=1;
  $tablefile = $tabledir."domain.tab";   if(!$userinput) { # Cipher not defined.
     } else {      &Failure($client, "error: Encrypted data without negotated key\n");
  return undef;      return 0;
    }
     }      }
     return $tablefile;      Debug("process_request: $userinput\n");
   
 }  
 #  
 #   PushFile:  Called to do an administrative push of a file.  
 #              - Ensure the file being pushed is one we support.  
 #              - Backup the old file to <filename.saved>  
 #              - Separate the contents of the new file out from the  
 #                rest of the request.  
 #              - Write the new file.  
 #  Parameter:  
 #     Request - The entire user request.  This consists of a : separated  
 #               string pushfile:tablename:contents.  
 #     NOTE:  The contents may have :'s in it as well making things a bit  
 #            more interesting... but not much.  
 #  Returns:  
 #     String to send to client ("ok" or "refused" if bad file).  
 #  
 sub PushFile {  
     my $request = shift;      
     my ($command, $filename, $contents) = split(":", $request, 3);  
           
     #  At this point in time, pushes for only the following tables are      #  
     #  supported:      #   The 'correct way' to add a command to lond is now to
     #   hosts.tab  ($filename eq host).      #   write a sub to execute it and Add it to the command dispatch
     #   domain.tab ($filename eq domain).      #   hash via a call to register_handler..  The comments to that
     # Construct the destination filename or reject the request.      #   sub should give you enough to go on to show how to do this
     #      #   along with the examples that are building up as this code
     # lonManage is supposed to ensure this, however this session could be      #   is getting refactored.   Until all branches of the
     # part of some elaborate spoof that managed somehow to authenticate.      #   if/elseif monster below have been factored out into
     #      #   separate procesor subs, if the dispatch hash is missing
       #   the command keyword, we will fall through to the remainder
       #   of the if/else chain below in order to keep this thing in 
       #   working order throughout the transmogrification.
   
     my $tablefile = ConfigFileFromSelector($filename);      my ($command, $tail) = split(/:/, $userinput, 2);
     if(! (defined $tablefile)) {      chomp($command);
  return "refused";      chomp($tail);
     }      $tail =~ s/(\r)//; # This helps people debugging with e.g. telnet.
     #      $command =~ s/(\r)//; # And this too for parameterless commands.
     # >copy< the old table to the backup table      if(!$tail) {
     #        don't rename in case system crashes/reboots etc. in the time   $tail =""; # defined but blank.
     #        window between a rename and write.  
     #  
     my $backupfile = $tablefile;  
     $backupfile    =~ s/\.tab$/.old/;  
     if(!CopyFile($tablefile, $backupfile)) {  
  &logthis('<font color="green"> CopyFile from '.$tablefile." to ".$backupfile." failed </font>");  
  return "error:$!";  
     }      }
     &logthis('<font color="green"> Pushfile: backed up '  
      .$tablefile." to $backupfile</font>");  
       
     #  If the file being pushed is the host file, we adjust the entry for ourself so that the  
     #  IP will be our current IP as looked up in dns.  Note this is only 99% good as it's possible  
     #  to conceive of conditions where we don't have a DNS entry locally.  This is possible in a   
     #  network sense but it doesn't make much sense in a LonCAPA sense so we ignore (for now)  
     #  that possibilty.  
   
     if($filename eq "host") {      &Debug("Command received: $command, encoded = $wasenc");
  $contents = AdjustHostContents($contents);  
     }  
   
     #  Install the new file:      if(defined $Dispatcher{$command}) {
   
     if(!InstallFile($tablefile, $contents)) {   my $dispatch_info = $Dispatcher{$command};
  &logthis('<font color="red"> Pushfile: unable to install '   my $handler       = $$dispatch_info[0];
  .$tablefile." $! </font>");   my $need_encode   = $$dispatch_info[1];
  return "error:$!";   my $client_types  = $$dispatch_info[2];
     } else {   Debug("Matched dispatch hash: mustencode: $need_encode "
  &logthis('<font color="green"> Installed new '.$tablefile        ."ClientType $client_types");
  ."</font>");        
    #  Validate the request:
     }        
    my $ok = 1;
    my $requesterprivs = 0;
    if(&isClient()) {
       $requesterprivs |= $CLIENT_OK;
    }
    if(&isManager()) {
       $requesterprivs |= $MANAGER_OK;
    }
    if($need_encode && (!$wasenc)) {
       Debug("Must encode but wasn't: $need_encode $wasenc");
       $ok = 0;
    }
    if(($client_types & $requesterprivs) == 0) {
       Debug("Client not privileged to do this operation");
       $ok = 0;
    }
   
    if($ok) {
       Debug("Dispatching to handler $command $tail");
       my $keep_going = &$handler($command, $tail, $client);
       return $keep_going;
    } else {
       Debug("Refusing to dispatch because client did not match requirements");
       Failure($client, "refused\n", $userinput);
       return 1;
    }
   
     #  Indicate success:      }    
    
     return "ok";  
   
       print $client "unknown_cmd\n";
   # -------------------------------------------------------------------- complete
       Debug("process_request - returning 1");
       return 1;
 }  }
   
 #  
 #  Called to re-init either lonc or lond.  
 #  #
   #   Decipher encoded traffic
 #  Parameters:  #  Parameters:
 #    request   - The full request by the client.  This is of the form  #     input      - Encoded data.
 #                reinit:<process>    
 #                where <process> is allowed to be either of   
 #                lonc or lond  
 #  
 #  Returns:  #  Returns:
 #     The string to be sent back to the client either:  #     Decoded data or undef if encryption key was not yet negotiated.
 #   ok         - Everything worked just fine.  #  Implicit input:
 #   error:why  - There was a failure and why describes the reason.  #     cipher  - This global holds the negotiated encryption key.
 #  
 #  
 sub ReinitProcess {  
     my $request = shift;  
   
   
     # separate the request (reinit) from the process identifier and  
     # validate it producing the name of the .pid file for the process.  
     #  
     #  
     my ($junk, $process) = split(":", $request);  
     my $processpidfile = $perlvar{'lonDaemons'}.'/logs/';  
     if($process eq 'lonc') {  
  $processpidfile = $processpidfile."lonc.pid";  
  if (!open(PIDFILE, "< $processpidfile")) {  
     return "error:Open failed for $processpidfile";  
  }  
  my $loncpid = <PIDFILE>;  
  close(PIDFILE);  
  logthis('<font color="red"> Reinitializing lonc pid='.$loncpid  
  ."</font>");  
  kill("USR2", $loncpid);  
     } elsif ($process eq 'lond') {  
  logthis('<font color="red"> Reinitializing self (lond) </font>');  
  &UpdateHosts; # Lond is us!!  
     } else {  
  &logthis('<font color="yellow" Invalid reinit request for '.$process  
  ."</font>");  
  return "error:Invalid process identifier $process";  
     }  
     return 'ok';  
 }  
 #   Validate a line in a configuration file edit script:  
 #   Validation includes:  
 #     - Ensuring the command is valid.  
 #     - Ensuring the command has sufficient parameters  
 #   Parameters:  
 #     scriptline - A line to validate (\n has been stripped for what it's worth).  
 #  
 #   Return:  
 #      0     - Invalid scriptline.  
 #      1     - Valid scriptline  
 #  NOTE:  
 #     Only the command syntax is checked, not the executability of the  
 #     command.  
 #  #
 sub isValidEditCommand {  sub decipher {
     my $scriptline = shift;      my ($input)  = @_;
       my $output = '';
     #   Line elements are pipe separated:  
   
     my ($command, $key, $newline)  = split(/\|/, $scriptline);  
     &logthis('<font color="green"> isValideditCommand checking: '.  
      "Command = '$command', Key = '$key', Newline = '$newline' </font>\n");  
           
     if ($command eq "delete") {      
  #      if($cipher) {
  #   key with no newline.   my($enc, $enclength, $encinput) = split(/:/, $input);
  #   for(my $encidx = 0; $encidx < length($encinput); $encidx += 16) {
  if( ($key eq "") || ($newline ne "")) {      $output .= 
     return 0; # Must have key but no newline.   $cipher->decrypt(pack("H16", substr($encinput, $encidx, 16)));
  } else {  
     return 1; # Valid syntax.  
  }  
     } elsif ($command eq "replace") {  
  #  
  #   key and newline:  
  #  
  if (($key eq "") || ($newline eq "")) {  
     return 0;  
  } else {  
     return 1;  
  }  
     } elsif ($command eq "append") {  
  if (($key ne "") && ($newline eq "")) {  
     return 1;  
  } else {  
     return 0;  
  }   }
    return substr($output, 0, $enclength);
     } else {      } else {
  return 0; # Invalid command.   return undef;
     }      }
     return 0; # Should not get here!!!  
 }  }
   
 #  #
 #   ApplyEdit - Applies an edit command to a line in a configuration   #   Register a command processor.  This function is invoked to register a sub
 #               file.  It is the caller's responsiblity to validate the  #   to process a request.  Once registered, the ProcessRequest sub can automatically
 #               edit line.  #   dispatch requests to an appropriate sub, and do the top level validity checking
   #   as well:
   #    - Is the keyword recognized.
   #    - Is the proper client type attempting the request.
   #    - Is the request encrypted if it has to be.
 #   Parameters:  #   Parameters:
 #      $directive - A single edit directive to apply.    #    $request_name         - Name of the request being registered.
 #                   Edit directives are of the form:  #                           This is the command request that will match
 #                  append|newline      - Appends a new line to the file.  #                           against the hash keywords to lookup the information
 #                  replace|key|newline - Replaces the line with key value 'key'  #                           associated with the dispatch information.
 #                  delete|key          - Deletes the line with key value 'key'.  #    $procedure           - Reference to a sub to call to process the request.
 #      $editor   - A config file editor object that contains the  #                           All subs get called as follows:
 #                  file being edited.  #                             Procedure($cmd, $tail, $replyfd, $key)
   #                             $cmd    - the actual keyword that invoked us.
   #                             $tail   - the tail of the request that invoked us.
   #                             $replyfd- File descriptor connected to the client
   #    $must_encode          - True if the request must be encoded to be good.
   #    $client_ok            - True if it's ok for a client to request this.
   #    $manager_ok           - True if it's ok for a manager to request this.
   # Side effects:
   #      - On success, the Dispatcher hash has an entry added for the key $RequestName
   #      - On failure, the program will die as it's a bad internal bug to try to 
   #        register a duplicate command handler.
 #  #
 sub ApplyEdit {  sub register_handler {
     my $directive   = shift;      my ($request_name,$procedure,$must_encode, $client_ok,$manager_ok)   = @_;
     my $editor      = shift;  
   
     # Break the directive down into its command and its parameters      #  Don't allow duplication#
     # (at most two at this point.  The meaning of the parameters, if in fact     
     #  they exist depends on the command).      if (defined $Dispatcher{$request_name}) {
    die "Attempting to define a duplicate request handler for $request_name\n";
     my ($command, $p1, $p2) = split(/\|/, $directive);  
   
     if($command eq "append") {  
  $editor->Append($p1);          # p1 - key p2 null.  
     } elsif ($command eq "replace") {  
  $editor->ReplaceLine($p1, $p2);   # p1 - key p2 = newline.  
     } elsif ($command eq "delete") {  
  $editor->DeleteLine($p1);         # p1 - key p2 null.  
     } else {          # Should not get here!!!  
  die "Invalid command given to ApplyEdit $command";  
     }      }
 }      #   Build the client type mask:
 #      
 # AdjustOurHost:      my $client_type_mask = 0;
 #           Adjusts a host file stored in a configuration file editor object      if($client_ok) {
 #           for the true IP address of this host. This is necessary for hosts   $client_type_mask  |= $CLIENT_OK;
 #           that live behind a firewall.  
 #           Those hosts have a publicly distributed IP of the firewall, but  
 #           internally must use their actual IP.  We assume that a given  
 #           host only has a single IP interface for now.  
 # Formal Parameters:  
 #     editor   - The configuration file editor to adjust.  This  
 #                editor is assumed to contain a hosts.tab file.  
 # Strategy:  
 #    - Figure out our hostname.  
 #    - Lookup the entry for this host.  
 #    - Modify the line to contain our IP  
 #    - Do a replace for this host.  
 sub AdjustOurHost {  
     my $editor        = shift;  
   
     # figure out who I am.  
   
     my $myHostName    = $perlvar{'lonHostID'}; # LonCAPA hostname.  
   
     #  Get my host file entry.  
   
     my $ConfigLine    = $editor->Find($myHostName);  
     if(! (defined $ConfigLine)) {  
  die "AdjustOurHost - no entry for me in hosts file $myHostName";  
     }      }
     # figure out my IP:      if($manager_ok) {
     #   Use the config line to get my hostname.   $client_type_mask  |= $MANAGER_OK;
     #   Use gethostbyname to translate that into an IP address.  
     #  
     my ($id,$domain,$role,$name,$ip,$maxcon,$idleto,$mincon) = split(/:/,$ConfigLine);  
     my $BinaryIp = gethostbyname($name);  
     my $ip       = inet_ntoa($ip);  
     #  
     #  Reassemble the config line from the elements in the list.  
     #  Note that if the loncnew items were not present before, they will  
     #  be now even if they would be empty  
     #  
     my $newConfigLine = $id;  
     foreach my $item ($domain, $role, $name, $ip, $maxcon, $idleto, $mincon) {  
  $newConfigLine .= ":".$item;  
     }      }
     #  Replace the line:     
       #  Enter the hash:
     $editor->ReplaceLine($id, $newConfigLine);        
           my @entry = ($procedure, $must_encode, $client_type_mask);
 }     
 #      $Dispatcher{$request_name} = \@entry;
 #   ReplaceConfigFile:     
 #              Replaces a configuration file with the contents of a  
 #              configuration file editor object.  
 #              This is done by:  
 #              - Copying the target file to <filename>.old  
 #              - Writing the new file to <filename>.tmp  
 #              - Moving <filename.tmp>  -> <filename>  
 #              This laborious process ensures that the system is never without  
 #              a configuration file that's at least valid (even if the contents  
 #              may be dated).  
 #   Parameters:  
 #        filename   - Name of the file to modify... this is a full path.  
 #        editor     - Editor containing the file.  
 #  
 sub ReplaceConfigFile {  
     my $filename  = shift;  
     my $editor    = shift;  
   
     CopyFile ($filename, $filename.".old");  
   
     my $contents  = $editor->Get(); # Get the contents of the file.  
   
     InstallFile($filename, $contents);  
 }  }
 #     
 #  
 #   Called to edit a configuration table  file  
 #   Parameters:  
 #      request           - The entire command/request sent by lonc or lonManage  
 #   Return:  
 #      The reply to send to the client.  
 #  
 sub EditFile {  
     my $request = shift;  
   
     #  Split the command into it's pieces:  edit:filetype:script  
   
     my ($request, $filetype, $script) = split(/:/, $request,3); # : in script  #------------------------------------------------------------------
   
     #  Check the pre-coditions for success:  
   
     if($request != "edit") { # Something is amiss afoot alack.  
  return "error:edit request detected, but request != 'edit'\n";  
     }  
     if( ($filetype ne "hosts")  &&  
  ($filetype ne "domain")) {  
  return "error:edit requested with invalid file specifier: $filetype \n";  
     }  
   
     #   Split the edit script and check it's validity.  
   
     my @scriptlines = split(/\n/, $script);  # one line per element.  
     my $linecount   = scalar(@scriptlines);  
     for(my $i = 0; $i < $linecount; $i++) {  
  chomp($scriptlines[$i]);  
  if(!isValidEditCommand($scriptlines[$i])) {  
     return "error:edit with bad script line: '$scriptlines[$i]' \n";  
  }  
     }  
   
     #   Execute the edit operation.  
     #   - Create a config file editor for the appropriate file and   
     #   - execute each command in the script:  
     #  
     my $configfile = ConfigFileFromSelector($filetype);  
     if (!(defined $configfile)) {  
  return "refused\n";  
     }  
     my $editor = ConfigFileEdit->new($configfile);  
   
     for (my $i = 0; $i < $linecount; $i++) {  
  ApplyEdit($scriptlines[$i], $editor);  
     }  
     # If the file is the host file, ensure that our host is  
     # adjusted to have our ip:  
     #  
     if($filetype eq "host") {  
  AdjustOurHost($editor);  
     }  
     #  Finally replace the current file with our file.  
     #  
     ReplaceConfigFile($configfile, $editor);  
   
     return "ok\n";  
 }  
 #  #
 #  Convert an error return code from lcpasswd to a string value.  #  Convert an error return code from lcpasswd to a string value.
 #  #
Line 3352  sub catchexception { Line 4261  sub catchexception {
     $SIG{'QUIT'}='DEFAULT';      $SIG{'QUIT'}='DEFAULT';
     $SIG{__DIE__}='DEFAULT';      $SIG{__DIE__}='DEFAULT';
     &status("Catching exception");      &status("Catching exception");
     &logthis("<font color=red>CRITICAL: "      &logthis("<font color='red'>CRITICAL: "
      ."ABNORMAL EXIT. Child $$ for server $thisserver died through "       ."ABNORMAL EXIT. Child $$ for server $thisserver died through "
      ."a crash with this error msg->[$error]</font>");       ."a crash with this error msg->[$error]</font>");
     &logthis('Famous last words: '.$status.' - '.$lastlog);      &logthis('Famous last words: '.$status.' - '.$lastlog);
     if ($client) { print $client "error: $error\n"; }      if ($client) { print $client "error: $error\n"; }
     $server->close();      $server->close();
     die($error);      die($error);
 }  }
   
 sub timeout {  sub timeout {
     &status("Handling Timeout");      &status("Handling Timeout");
     &logthis("<font color=ref>CRITICAL: TIME OUT ".$$."</font>");      &logthis("<font color='red'>CRITICAL: TIME OUT ".$$."</font>");
     &catchexception('Timeout');      &catchexception('Timeout');
 }  }
 # -------------------------------- Set signal handlers to record abnormal exits  # -------------------------------- Set signal handlers to record abnormal exits
   
   
 $SIG{'QUIT'}=\&catchexception;  $SIG{'QUIT'}=\&catchexception;
 $SIG{__DIE__}=\&catchexception;  $SIG{__DIE__}=\&catchexception;
   
Line 3380  undef $perlvarref; Line 4289  undef $perlvarref;
 # ----------------------------- Make sure this process is running from user=www  # ----------------------------- Make sure this process is running from user=www
 my $wwwid=getpwnam('www');  my $wwwid=getpwnam('www');
 if ($wwwid!=$<) {  if ($wwwid!=$<) {
     my $emailto="$perlvar{'lonAdmEMail'},$perlvar{'lonSysEMail'}";     my $emailto="$perlvar{'lonAdmEMail'},$perlvar{'lonSysEMail'}";
     my $subj="LON: $currenthostid User ID mismatch";     my $subj="LON: $currenthostid User ID mismatch";
     system("echo 'User ID mismatch.  lond must be run as user www.' |\     system("echo 'User ID mismatch.  lond must be run as user www.' |\
  mailto $emailto -s '$subj' > /dev/null");   mailto $emailto -s '$subj' > /dev/null");
     exit 1;     exit 1;
 }  }
   
 # --------------------------------------------- Check if other instance running  # --------------------------------------------- Check if other instance running
Line 3392  if ($wwwid!=$<) { Line 4301  if ($wwwid!=$<) {
 my $pidfile="$perlvar{'lonDaemons'}/logs/lond.pid";  my $pidfile="$perlvar{'lonDaemons'}/logs/lond.pid";
   
 if (-e $pidfile) {  if (-e $pidfile) {
     my $lfh=IO::File->new("$pidfile");     my $lfh=IO::File->new("$pidfile");
     my $pide=<$lfh>;     my $pide=<$lfh>;
     chomp($pide);     chomp($pide);
     if (kill 0 => $pide) { die "already running"; }     if (kill 0 => $pide) { die "already running"; }
 }  }
   
 # ------------------------------------------------------------- Read hosts file  # ------------------------------------------------------------- Read hosts file
Line 3408  $server = IO::Socket::INET->new(LocalPor Line 4317  $server = IO::Socket::INET->new(LocalPor
                                 Proto     => 'tcp',                                  Proto     => 'tcp',
                                 Reuse     => 1,                                  Reuse     => 1,
                                 Listen    => 10 )                                  Listen    => 10 )
     or die "making socket: $@\n";    or die "making socket: $@\n";
   
 # --------------------------------------------------------- Do global variables  # --------------------------------------------------------- Do global variables
   
 # global variables  # global variables
   
 my %children               = ();       # keys are current child process IDs  my %children               = ();       # keys are current child process IDs
 my $children               = 0;        # current number of children  
   
 sub REAPER {                        # takes care of dead children  sub REAPER {                        # takes care of dead children
     $SIG{CHLD} = \&REAPER;      $SIG{CHLD} = \&REAPER;
     &status("Handling child death");      &status("Handling child death");
     my $pid = wait;      my $pid;
     if (defined($children{$pid})) {      do {
  &logthis("Child $pid died");   $pid = waitpid(-1,&WNOHANG());
  $children --;   if (defined($children{$pid})) {
  delete $children{$pid};      &logthis("Child $pid died");
     } else {      delete($children{$pid});
  &logthis("Unknown Child $pid died");   } elsif ($pid > 0) {
       &logthis("Unknown Child $pid died");
    }
       } while ( $pid > 0 );
       foreach my $child (keys(%children)) {
    $pid = waitpid($child,&WNOHANG());
    if ($pid > 0) {
       &logthis("Child $child - $pid looks like we missed it's death");
       delete($children{$pid});
    }
     }      }
     &status("Finished Handling child death");      &status("Finished Handling child death");
 }  }
Line 3438  sub HUNTSMAN {                      # si Line 4355  sub HUNTSMAN {                      # si
     &logthis("Free socket: ".shutdown($server,2)); # free up socket      &logthis("Free socket: ".shutdown($server,2)); # free up socket
     my $execdir=$perlvar{'lonDaemons'};      my $execdir=$perlvar{'lonDaemons'};
     unlink("$execdir/logs/lond.pid");      unlink("$execdir/logs/lond.pid");
     &logthis("<font color=red>CRITICAL: Shutting down</font>");      &logthis("<font color='red'>CRITICAL: Shutting down</font>");
     &status("Done killing children");      &status("Done killing children");
     exit;                           # clean up with dignity      exit;                           # clean up with dignity
 }  }
Line 3448  sub HUPSMAN {                      # sig Line 4365  sub HUPSMAN {                      # sig
     &status("Killing children for restart (HUP)");      &status("Killing children for restart (HUP)");
     kill 'INT' => keys %children;      kill 'INT' => keys %children;
     &logthis("Free socket: ".shutdown($server,2)); # free up socket      &logthis("Free socket: ".shutdown($server,2)); # free up socket
     &logthis("<font color=red>CRITICAL: Restarting</font>");      &logthis("<font color='red'>CRITICAL: Restarting</font>");
     my $execdir=$perlvar{'lonDaemons'};      my $execdir=$perlvar{'lonDaemons'};
     unlink("$execdir/logs/lond.pid");      unlink("$execdir/logs/lond.pid");
     &status("Restarting self (HUP)");      &status("Restarting self (HUP)");
Line 3458  sub HUPSMAN {                      # sig Line 4375  sub HUPSMAN {                      # sig
 #  #
 #    Kill off hashes that describe the host table prior to re-reading it.  #    Kill off hashes that describe the host table prior to re-reading it.
 #    Hashes affected are:  #    Hashes affected are:
 #       %hostid, %hostdom %hostip  #       %hostid, %hostdom %hostip %hostdns.
 #  #
 sub KillHostHashes {  sub KillHostHashes {
     foreach my $key (keys %hostid) {      foreach my $key (keys %hostid) {
Line 3470  sub KillHostHashes { Line 4387  sub KillHostHashes {
     foreach my $key (keys %hostip) {      foreach my $key (keys %hostip) {
  delete $hostip{$key};   delete $hostip{$key};
     }      }
       foreach my $key (keys %hostdns) {
    delete $hostdns{$key};
       }
 }  }
 #  #
 #   Read in the host table from file and distribute it into the various hashes:  #   Read in the host table from file and distribute it into the various hashes:
Line 3480  sub KillHostHashes { Line 4400  sub KillHostHashes {
 sub ReadHostTable {  sub ReadHostTable {
   
     open (CONFIG,"$perlvar{'lonTabDir'}/hosts.tab") || die "Can't read host file";      open (CONFIG,"$perlvar{'lonTabDir'}/hosts.tab") || die "Can't read host file";
           my $myloncapaname = $perlvar{'lonHostID'};
       Debug("My loncapa name is : $myloncapaname");
     while (my $configline=<CONFIG>) {      while (my $configline=<CONFIG>) {
  my ($id,$domain,$role,$name,$ip)=split(/:/,$configline);   if ($configline !~ /^\s*\#/ && $configline !~ /^\s*$/ ) {
  chomp($ip); $ip=~s/\D+$//;      my ($id,$domain,$role,$name)=split(/:/,$configline);
  $hostid{$ip}=$id;      $name=~s/\s//g;
  $hostdom{$id}=$domain;      my $ip = gethostbyname($name);
  $hostip{$id}=$ip;      if (length($ip) ne 4) {
  if ($id eq $perlvar{'lonHostID'}) { $thisserver=$name; }   &logthis("Skipping host $id name $name no IP $ip found\n");
    next;
       }
       $ip=inet_ntoa($ip);
       $hostid{$ip}=$id;         # LonCAPA name of host by IP.
       $hostdom{$id}=$domain;    # LonCAPA domain name of host. 
       $hostip{$id}=$ip;         # IP address of host.
       $hostdns{$name} = $id;    # LonCAPA name of host by DNS.
   
       if ($id eq $perlvar{'lonHostID'}) { 
    Debug("Found me in the host table: $name");
    $thisserver=$name; 
       }
    }
     }      }
     close(CONFIG);      close(CONFIG);
 }  }
Line 3549  sub checkchildren { Line 4483  sub checkchildren {
     &logthis('Going to check on the children');      &logthis('Going to check on the children');
     my $docdir=$perlvar{'lonDocRoot'};      my $docdir=$perlvar{'lonDocRoot'};
     foreach (sort keys %children) {      foreach (sort keys %children) {
  sleep 1;   #sleep 1;
         unless (kill 'USR1' => $_) {          unless (kill 'USR1' => $_) {
     &logthis ('Child '.$_.' is dead');      &logthis ('Child '.$_.' is dead');
             &logstatus($$.' is dead');              &logstatus($$.' is dead');
       delete($children{$_});
         }           } 
     }      }
     sleep 5;      sleep 5;
     $SIG{ALRM} = sub { die "timeout" };      $SIG{ALRM} = sub { Debug("timeout"); 
          die "timeout";  };
     $SIG{__DIE__} = 'DEFAULT';      $SIG{__DIE__} = 'DEFAULT';
     &status("Checking on the children (waiting for reports)");      &status("Checking on the children (waiting for reports)");
     foreach (sort keys %children) {      foreach (sort keys %children) {
         unless (-e "$docdir/lon-status/londchld/$_.txt") {          unless (-e "$docdir/lon-status/londchld/$_.txt") {
     eval {            eval {
  alarm(300);              alarm(300);
  &logthis('Child '.$_.' did not respond');      &logthis('Child '.$_.' did not respond');
  kill 9 => $_;      kill 9 => $_;
  #$emailto="$perlvar{'lonAdmEMail'},$perlvar{'lonSysEMail'}";      #$emailto="$perlvar{'lonAdmEMail'},$perlvar{'lonSysEMail'}";
  #$subj="LON: $currenthostid killed lond process $_";      #$subj="LON: $currenthostid killed lond process $_";
  #my $result=`echo 'Killed lond process $_.' | mailto $emailto -s '$subj' > /dev/null`;      #my $result=`echo 'Killed lond process $_.' | mailto $emailto -s '$subj' > /dev/null`;
  #$execdir=$perlvar{'lonDaemons'};      #$execdir=$perlvar{'lonDaemons'};
  #$result=`/bin/cp $execdir/logs/lond.log $execdir/logs/lond.log.$_`;      #$result=`/bin/cp $execdir/logs/lond.log $execdir/logs/lond.log.$_`;
  alarm(0);      delete($children{$_});
     }      alarm(0);
     }
         }          }
     }      }
     $SIG{ALRM} = 'DEFAULT';      $SIG{ALRM} = 'DEFAULT';
     $SIG{__DIE__} = \&catchexception;      $SIG{__DIE__} = \&catchexception;
     &status("Finished checking children");      &status("Finished checking children");
       &logthis('Finished Checking children');
 }  }
   
 # --------------------------------------------------------------------- Logging  # --------------------------------------------------------------------- Logging
Line 3607  sub Debug { Line 4545  sub Debug {
 #     reply   - Text to send to client.  #     reply   - Text to send to client.
 #     request - Original request from client.  #     request - Original request from client.
 #  #
 #  Note: This increments Transactions  
 #  
 sub Reply {  sub Reply {
     alarm(120);      my ($fd, $reply, $request) = @_;
     my $fd      = shift;  
     my $reply   = shift;  
     my $request = shift;  
   
     print $fd $reply;      print $fd $reply;
     Debug("Request was $request  Reply was $reply");      Debug("Request was $request  Reply was $reply");
   
     $Transactions++;      $Transactions++;
     alarm(0);  }
   
   
 }  
 #  #
 #    Sub to report a failure.  #    Sub to report a failure.
 #    This function:  #    This function:
Line 3652  sub logstatus { Line 4583  sub logstatus {
     &status("Doing logging");      &status("Doing logging");
     my $docdir=$perlvar{'lonDocRoot'};      my $docdir=$perlvar{'lonDocRoot'};
     {      {
  my $fh=IO::File->new(">>$docdir/lon-status/londstatus.txt");   my $fh=IO::File->new(">$docdir/lon-status/londchld/$$.txt");
  print $fh $$."\t".$currenthostid."\t".$status."\t".$lastlog."\n";          print $fh $status."\n".$lastlog."\n".time."\n$keymode";
  $fh->close();          $fh->close();
     }      }
     &status("Finished londstatus.txt");      &status("Finished $$.txt");
     {      {
  my $fh=IO::File->new(">$docdir/lon-status/londchld/$$.txt");   open(LOG,">>$docdir/lon-status/londstatus.txt");
  print $fh $status."\n".$lastlog."\n".time;   flock(LOG,LOCK_EX);
  $fh->close();   print LOG $$."\t".$clientname."\t".$currenthostid."\t"
       .$status."\t".$lastlog."\t $keymode\n";
    flock(LOG,LOCK_UN);
    close(LOG);
     }      }
     ResetStatistics;  
     &status("Finished logging");      &status("Finished logging");
      
 }  }
   
 sub initnewstatus {  sub initnewstatus {
Line 3686  sub status { Line 4618  sub status {
     my $what=shift;      my $what=shift;
     my $now=time;      my $now=time;
     my $local=localtime($now);      my $local=localtime($now);
     my $status = "lond: $what $local ";      $status=$local.': '.$what;
     if($Transactions) {      $0='lond: '.$what.' '.$local;
  $status .= " Transactions: $Transactions Failed; $Failures";  
     }  
     $0=$status;  
 }  }
   
 # -------------------------------------------------------- Escape Special Chars  # -------------------------------------------------------- Escape Special Chars
Line 3722  sub reconlonc { Line 4651  sub reconlonc {
     &logthis("lonc at pid $loncpid responding, sending USR1");      &logthis("lonc at pid $loncpid responding, sending USR1");
             kill USR1 => $loncpid;              kill USR1 => $loncpid;
         } else {          } else {
     &logthis("<font color=red>CRITICAL: "      &logthis(
      ."lonc at pid $loncpid not responding, giving up</font>");                "<font color='red'>CRITICAL: "
                ."lonc at pid $loncpid not responding, giving up</font>");
         }          }
     } else {      } else {
  &logthis('<font color=red>CRITICAL: lonc not running, giving up</font>');        &logthis('<font color="red">CRITICAL: lonc not running, giving up</font>');
     }      }
 }  }
   
Line 3738  sub subreply { Line 4668  sub subreply {
     my $sclient=IO::Socket::UNIX->new(Peer    =>"$peerfile",      my $sclient=IO::Socket::UNIX->new(Peer    =>"$peerfile",
                                       Type    => SOCK_STREAM,                                        Type    => SOCK_STREAM,
                                       Timeout => 10)                                        Timeout => 10)
  or return "con_lost";         or return "con_lost";
     print $sclient "$cmd\n";      print $sclient "$cmd\n";
     my $answer=<$sclient>;      my $answer=<$sclient>;
     chomp($answer);      chomp($answer);
Line 3747  sub subreply { Line 4677  sub subreply {
 }  }
   
 sub reply {  sub reply {
     my ($cmd,$server)=@_;    my ($cmd,$server)=@_;
     my $answer;    my $answer;
     if ($server ne $currenthostid) {     if ($server ne $currenthostid) { 
  $answer=subreply($cmd,$server);      $answer=subreply($cmd,$server);
  if ($answer eq 'con_lost') {      if ($answer eq 'con_lost') {
     $answer=subreply("ping",$server);   $answer=subreply("ping",$server);
     if ($answer ne $server) {          if ($answer ne $server) {
  &logthis("sub reply: answer != server answer is $answer, server is $server");      &logthis("sub reply: answer != server answer is $answer, server is $server");
  &reconlonc("$perlvar{'lonSockDir'}/$server");             &reconlonc("$perlvar{'lonSockDir'}/$server");
     }          }
     $answer=subreply($cmd,$server);          $answer=subreply($cmd,$server);
  }      }
     } else {    } else {
  $answer='self_reply';      $answer='self_reply';
     }     } 
     return $answer;    return $answer;
 }  }
   
 # -------------------------------------------------------------- Talk to lonsql  # -------------------------------------------------------------- Talk to lonsql
   
 sub sqlreply {  sub sql_reply {
     my ($cmd)=@_;      my ($cmd)=@_;
     my $answer=subsqlreply($cmd);      my $answer=&sub_sql_reply($cmd);
     if ($answer eq 'con_lost') { $answer=subsqlreply($cmd); }      if ($answer eq 'con_lost') { $answer=&sub_sql_reply($cmd); }
     return $answer;      return $answer;
 }  }
   
 sub subsqlreply {  sub sub_sql_reply {
     my ($cmd)=@_;      my ($cmd)=@_;
     my $unixsock="mysqlsock";      my $unixsock="mysqlsock";
     my $peerfile="$perlvar{'lonSockDir'}/$unixsock";      my $peerfile="$perlvar{'lonSockDir'}/$unixsock";
     my $sclient=IO::Socket::UNIX->new(Peer    =>"$peerfile",      my $sclient=IO::Socket::UNIX->new(Peer    =>"$peerfile",
                                       Type    => SOCK_STREAM,                                        Type    => SOCK_STREAM,
                                       Timeout => 10)                                        Timeout => 10)
  or return "con_lost";         or return "con_lost";
     print $sclient "$cmd\n";      print $sclient "$cmd\n";
     my $answer=<$sclient>;      my $answer=<$sclient>;
     chomp($answer);      chomp($answer);
Line 3793  sub subsqlreply { Line 4723  sub subsqlreply {
   
 sub propath {  sub propath {
     my ($udom,$uname)=@_;      my ($udom,$uname)=@_;
     Debug("Propath:$udom:$uname");  
     $udom=~s/\W//g;      $udom=~s/\W//g;
     $uname=~s/\W//g;      $uname=~s/\W//g;
     Debug("Propath2:$udom:$uname");  
     my $subdir=$uname.'__';      my $subdir=$uname.'__';
     $subdir =~ s/(.)(.)(.).*/$1\/$2\/$3/;      $subdir =~ s/(.)(.)(.).*/$1\/$2\/$3/;
     my $proname="$perlvar{'lonUsersDir'}/$udom/$subdir/$uname";      my $proname="$perlvar{'lonUsersDir'}/$udom/$subdir/$uname";
     Debug("Propath returning $proname");  
     return $proname;      return $proname;
 }   } 
   
Line 3833  my $execdir=$perlvar{'lonDaemons'}; Line 4760  my $execdir=$perlvar{'lonDaemons'};
 open (PIDSAVE,">$execdir/logs/lond.pid");  open (PIDSAVE,">$execdir/logs/lond.pid");
 print PIDSAVE "$$\n";  print PIDSAVE "$$\n";
 close(PIDSAVE);  close(PIDSAVE);
 &logthis("<font color=red>CRITICAL: ---------- Starting ----------</font>");  &logthis("<font color='red'>CRITICAL: ---------- Starting ----------</font>");
 &status('Starting');  &status('Starting');
   
   
Line 3851  $SIG{USR2} = \&UpdateHosts; Line 4778  $SIG{USR2} = \&UpdateHosts;
   
 ReadHostTable;  ReadHostTable;
   
   my $dist=`$perlvar{'lonDaemons'}/distprobe`;
   
 # --------------------------------------------------------------  # --------------------------------------------------------------
 #   Accept connections.  When a connection comes in, it is validated  #   Accept connections.  When a connection comes in, it is validated
Line 3867  while (1) { Line 4795  while (1) {
   
 sub make_new_child {  sub make_new_child {
     my $pid;      my $pid;
   #    my $cipher;     # Now global
     my $sigset;      my $sigset;
   
     $client = shift;      $client = shift;
Line 3877  sub make_new_child { Line 4806  sub make_new_child {
     $sigset = POSIX::SigSet->new(SIGINT);      $sigset = POSIX::SigSet->new(SIGINT);
     sigprocmask(SIG_BLOCK, $sigset)      sigprocmask(SIG_BLOCK, $sigset)
         or die "Can't block SIGINT for fork: $!\n";          or die "Can't block SIGINT for fork: $!\n";
       
     die "fork: $!" unless defined ($pid = fork);      die "fork: $!" unless defined ($pid = fork);
   
     $client->sockopt(SO_KEEPALIVE, 1); # Enable monitoring of      $client->sockopt(SO_KEEPALIVE, 1); # Enable monitoring of
Line 3888  sub make_new_child { Line 4817  sub make_new_child {
     #  the pid hash.      #  the pid hash.
     #      #
     my $caller = getpeername($client);      my $caller = getpeername($client);
     my ($port,$iaddr)=unpack_sockaddr_in($caller);      my ($port,$iaddr);
     $clientip=inet_ntoa($iaddr);      if (defined($caller) && length($caller) > 0) {
    ($port,$iaddr)=unpack_sockaddr_in($caller);
       } else {
    &logthis("Unable to determine who caller was, getpeername returned nothing");
       }
       if (defined($iaddr)) {
    $clientip  = inet_ntoa($iaddr);
    Debug("Connected with $clientip");
       } else {
    &logthis("Unable to determine clientip");
    $clientip='Unavailable';
       }
           
     if ($pid) {      if ($pid) {
         # Parent records the child's birth and returns.          # Parent records the child's birth and returns.
         sigprocmask(SIG_UNBLOCK, $sigset)          sigprocmask(SIG_UNBLOCK, $sigset)
             or die "Can't unblock SIGINT for fork: $!\n";              or die "Can't unblock SIGINT for fork: $!\n";
         $children{$pid} = $clientip;          $children{$pid} = $clientip;
         $children++;  
         &status('Started child '.$pid);          &status('Started child '.$pid);
         return;          return;
     } else {      } else {
Line 3913  sub make_new_child { Line 4852  sub make_new_child {
         sigprocmask(SIG_UNBLOCK, $sigset)          sigprocmask(SIG_UNBLOCK, $sigset)
             or die "Can't unblock SIGINT for fork: $!\n";              or die "Can't unblock SIGINT for fork: $!\n";
   
   #        my $tmpsnum=0;            # Now global
   #---------------------------------------------------- kerberos 5 initialization
         &Authen::Krb5::init_context();          &Authen::Krb5::init_context();
         &Authen::Krb5::init_ets();   if ($dist ne 'fedora4') {
       &Authen::Krb5::init_ets();
    }
   
  &status('Accepted connection');   &status('Accepted connection');
 # =============================================================================  # =============================================================================
             # do something with the connection              # do something with the connection
 # -----------------------------------------------------------------------------  # -----------------------------------------------------------------------------
  # see if we know client and check for spoof IP by challenge   # see if we know client and 'check' for spoof IP by ineffective challenge
   
  ReadManagerTable; # May also be a manager!!   ReadManagerTable; # May also be a manager!!
   
  my $clientrec=($hostid{$clientip}     ne undef);   my $outsideip=$clientip;
  my $ismanager=($managers{$clientip}    ne undef);   if ($clientip eq '127.0.0.1') {
       $outsideip=$hostip{$perlvar{'lonHostID'}};
    }
   
    my $clientrec=($hostid{$outsideip}     ne undef);
    my $ismanager=($managers{$outsideip}    ne undef);
  $clientname  = "[unknonwn]";   $clientname  = "[unknonwn]";
  if($clientrec) { # Establish client type.   if($clientrec) { # Establish client type.
     $ConnectionType = "client";      $ConnectionType = "client";
     $clientname = $hostid{$clientip};      $clientname = $hostid{$outsideip};
     if($ismanager) {      if($ismanager) {
  $ConnectionType = "both";   $ConnectionType = "both";
     }      }
  } else {   } else {
     $ConnectionType = "manager";      $ConnectionType = "manager";
     $clientname = $managers{$clientip};      $clientname = $managers{$outsideip};
  }   }
  my $clientok;   my $clientok;
   
  if ($clientrec || $ismanager) {   if ($clientrec || $ismanager) {
     &status("Waiting for init from $clientip $clientname");      &status("Waiting for init from $clientip $clientname");
     &logthis('<font color="yellow">INFO: Connection, '.      &logthis('<font color="yellow">INFO: Connection, '.
      $clientip.       $clientip.
      " ($clientname) connection type = $ConnectionType </font>" );    " ($clientname) connection type = $ConnectionType </font>" );
     &status("Connecting $clientip  ($clientname))");       &status("Connecting $clientip  ($clientname))"); 
     my $remotereq=<$client>;      my $remotereq=<$client>;
     $remotereq=~s/[^\w:]//g;      chomp($remotereq);
       Debug("Got init: $remotereq");
       my $inikeyword = split(/:/, $remotereq);
     if ($remotereq =~ /^init/) {      if ($remotereq =~ /^init/) {
  &sethost("sethost:$perlvar{'lonHostID'}");   &sethost("sethost:$perlvar{'lonHostID'}");
  my $challenge="$$".time;   #
  print $client "$challenge\n";   #  If the remote is attempting a local init... give that a try:
  &status("Waiting for challenge reply from $clientip ($clientname)");    #
  $remotereq=<$client>;   my ($i, $inittype) = split(/:/, $remotereq);
  $remotereq=~s/\W//g;  
  if ($challenge eq $remotereq) {   # If the connection type is ssl, but I didn't get my
     $clientok=1;   # certificate files yet, then I'll drop  back to 
     print $client "ok\n";   # insecure (if allowed).
   
    if($inittype eq "ssl") {
       my ($ca, $cert) = lonssl::CertificateFile;
       my $kfile       = lonssl::KeyFile;
       if((!$ca)   || 
          (!$cert) || 
          (!$kfile)) {
    $inittype = ""; # This forces insecure attempt.
    &logthis("<font color=\"blue\"> Certificates not "
    ."installed -- trying insecure auth</font>");
       } else { # SSL certificates are in place so
       } # Leave the inittype alone.
    }
   
    if($inittype eq "local") {
       my $key = LocalConnection($client, $remotereq);
       if($key) {
    Debug("Got local key $key");
    $clientok     = 1;
    my $cipherkey = pack("H32", $key);
    $cipher       = new IDEA($cipherkey);
    print $client "ok:local\n";
    &logthis('<font color="green"'
    . "Successful local authentication </font>");
    $keymode = "local"
       } else {
    Debug("Failed to get local key");
    $clientok = 0;
    shutdown($client, 3);
    close $client;
       }
    } elsif ($inittype eq "ssl") {
       my $key = SSLConnection($client);
       if ($key) {
    $clientok = 1;
    my $cipherkey = pack("H32", $key);
    $cipher       = new IDEA($cipherkey);
    &logthis('<font color="green">'
    ."Successfull ssl authentication with $clientname </font>");
    $keymode = "ssl";
        
       } else {
    $clientok = 0;
    close $client;
       }
      
  } else {   } else {
     &logthis("<font color=blue>WARNING: $clientip did not reply challenge</font>");      my $ok = InsecureConnection($client);
     &status('No challenge reply '.$clientip);      if($ok) {
    $clientok = 1;
    &logthis('<font color="green">'
    ."Successful insecure authentication with $clientname </font>");
    print $client "ok\n";
    $keymode = "insecure";
       } else {
    &logthis('<font color="yellow">'
     ."Attempted insecure connection disallowed </font>");
    close $client;
    $clientok = 0;
   
       }
  }   }
     } else {      } else {
  &logthis("<font color=blue>WARNING: "   &logthis(
    "<font color='blue'>WARNING: "
  ."$clientip failed to initialize: >$remotereq< </font>");   ."$clientip failed to initialize: >$remotereq< </font>");
  &status('No init '.$clientip);   &status('No init '.$clientip);
     }      }
       
  } else {   } else {
     &logthis("<font color=blue>WARNING: Unknown client $clientip</font>");      &logthis(
        "<font color='blue'>WARNING: Unknown client $clientip</font>");
     &status('Hung up on '.$clientip);      &status('Hung up on '.$clientip);
  }   }
    
  if ($clientok) {   if ($clientok) {
 # ---------------- New known client connecting, could mean machine online again  # ---------------- New known client connecting, could mean machine online again
           
Line 3982  sub make_new_child { Line 4993  sub make_new_child {
  }   }
  &reconlonc("$perlvar{'lonSockDir'}/$id");   &reconlonc("$perlvar{'lonSockDir'}/$id");
     }      }
     &logthis("<font color=green>Established connection: $clientname</font>");      &logthis("<font color='green'>Established connection: $clientname</font>");
     &status('Will listen to '.$clientname);      &status('Will listen to '.$clientname);
   
     ResetStatistics();  
   
 # ------------------------------------------------------------ Process requests  # ------------------------------------------------------------ Process requests
     my $KeepGoing = 1;      my $keep_going = 1;
     while ((my $userinput=GetRequest) && $KeepGoing) {      my $user_input;
  $KeepGoing = ProcessRequest($userinput);      while(($user_input = get_request) && $keep_going) {
 # -------------------------------------------------------------------- complete   alarm(120);
    Debug("Main: Got $user_input\n");
  &status('Listening to '.$clientname);   $keep_going = &process_request($user_input);
    alarm(0);
    &status('Listening to '.$clientname." ($keymode)");   
     }      }
   
 # --------------------------------------------- client unknown or fishy, refuse  # --------------------------------------------- client unknown or fishy, refuse
  } else {   }  else {
     print $client "refused\n";      print $client "refused\n";
     $client->close();      $client->close();
     &logthis("<font color=blue>WARNING: "      &logthis("<font color='blue'>WARNING: "
      ."Rejected client $clientip, closing connection</font>");       ."Rejected client $clientip, closing connection</font>");
  }   }
     }                   }            
           
 # =============================================================================  # =============================================================================
           
     &logthis("<font color=red>CRITICAL: "      &logthis("<font color='red'>CRITICAL: "
      ."Disconnect from $clientip ($clientname)</font>");           ."Disconnect from $clientip ($clientname)</font>");    
           
           
Line 4016  sub make_new_child { Line 5027  sub make_new_child {
     exit;      exit;
           
 }  }
   #
   #   Determine if a user is an author for the indicated domain.
   #
   # Parameters:
   #    domain          - domain to check in .
   #    user            - Name of user to check.
   #
   # Return:
   #     1             - User is an author for domain.
   #     0             - User is not an author for domain.
   sub is_author {
       my ($domain, $user) = @_;
   
       &Debug("is_author: $user @ $domain");
   
       my $hashref = &tie_user_hash($domain, $user, "roles",
    &GDBM_READER());
   
       #  Author role should show up as a key /domain/_au
   
       my $key   = "/$domain/_au";
       my $value = $hashref->{$key};
   
       if(defined($value)) {
    &Debug("$user @ $domain is an author");
       }
   
       return defined($value);
   }
 #  #
 #   Checks to see if the input roleput request was to set  #   Checks to see if the input roleput request was to set
 # an author role.  If so, invokes the lchtmldir script to set  # an author role.  If so, invokes the lchtmldir script to set
Line 4029  sub make_new_child { Line 5067  sub make_new_child {
 #    user      - Name of the user for which the role is being put.  #    user      - Name of the user for which the role is being put.
 #    authtype  - The authentication type associated with the user.  #    authtype  - The authentication type associated with the user.
 #  #
 sub ManagePermissions {  sub manage_permissions
     my $request = shift;  {
     my $domain  = shift;  
     my $user    = shift;  
     my $authtype= shift;      my ($request, $domain, $user, $authtype) = @_;
   
       &Debug("manage_permissions: $request $domain $user $authtype");
   
     # See if the request is of the form /$domain/_au      # See if the request is of the form /$domain/_au
     &logthis("ruequest is $request");  
     if($request =~ /^(\/$domain\/_au)$/) { # It's an author rolesput...      if($request =~ /^(\/$domain\/_au)$/) { # It's an author rolesput...
  my $execdir = $perlvar{'lonDaemons'};   my $execdir = $perlvar{'lonDaemons'};
  my $userhome= "/home/$user" ;   my $userhome= "/home/$user" ;
  &logthis("system $execdir/lchtmldir $userhome $user $authtype");   &logthis("system $execdir/lchtmldir $userhome $user $authtype");
    &Debug("Setting homedir permissions for $userhome");
  system("$execdir/lchtmldir $userhome $user $authtype");   system("$execdir/lchtmldir $userhome $user $authtype");
     }      }
 }  }
   
   
 #  #
 #  Return the full path of a user password file, whether it exists or not.  #  Return the full path of a user password file, whether it exists or not.
 # Parameters:  # Parameters:
Line 4053  sub ManagePermissions { Line 5094  sub ManagePermissions {
 # Returns:  # Returns:
 #    Full passwd path:  #    Full passwd path:
 #  #
 sub PasswordPath {  sub password_path {
     my $domain = shift;      my ($domain, $user) = @_;
     my $user   = shift;      return &propath($domain, $user).'/passwd';
   
     my $path   = &propath($domain, $user);  
     $path  .= "/passwd";  
   
     return $path;  
 }  }
   
 #   Password Filename  #   Password Filename
Line 4073  sub PasswordPath { Line 5109  sub PasswordPath {
 #   - If the password file exists returns its path.  #   - If the password file exists returns its path.
 #   - If the password file does not exist, returns undefined.  #   - If the password file does not exist, returns undefined.
 #  #
 sub PasswordFilename {  sub password_filename {
     my $domain    = shift;      my ($domain, $user) = @_;
     my $user      = shift;  
   
     Debug ("PasswordFilename called: dom = $domain user = $user");      Debug ("PasswordFilename called: dom = $domain user = $user");
   
     my $path  = PasswordPath($domain, $user);      my $path  = &password_path($domain, $user);
     Debug("PasswordFilename got path: $path");      Debug("PasswordFilename got path: $path");
     if(-e $path) {      if(-e $path) {
  return $path;   return $path;
Line 4098  sub PasswordFilename { Line 5133  sub PasswordFilename {
 #   0    - Failed.  #   0    - Failed.
 #   1    - Success.  #   1    - Success.
 #  #
 sub RewritePwFile {  sub rewrite_password_file {
     my $domain   = shift;      my ($domain, $user, $contents) = @_;
     my $user     = shift;  
     my $contents = shift;  
   
     my $file = PasswordFilename($domain, $user);      my $file = &password_filename($domain, $user);
     if (defined $file) {      if (defined $file) {
  my $pf = IO::File->new(">$file");   my $pf = IO::File->new(">$file");
  if($pf) {   if($pf) {
Line 4117  sub RewritePwFile { Line 5150  sub RewritePwFile {
     }      }
   
 }  }
   
 #  #
 #   GetAuthType - Determines the authorization type of a user in a domain.  #   get_auth_type - Determines the authorization type of a user in a domain.
   
 #     Returns the authorization type or nouser if there is no such user.  #     Returns the authorization type or nouser if there is no such user.
 #  #
 sub GetAuthType {  sub get_auth_type 
     my $domain = shift;  {
     my $user   = shift;  
       my ($domain, $user)  = @_;
     Debug("GetAuthType( $domain, $user ) \n");  
     my $passwdfile = PasswordFilename($domain, $user);      Debug("get_auth_type( $domain, $user ) \n");
     if( defined $passwdfile ) {      my $proname    = &propath($domain, $user); 
       my $passwdfile = "$proname/passwd";
       if( -e $passwdfile ) {
  my $pf = IO::File->new($passwdfile);   my $pf = IO::File->new($passwdfile);
  my $realpassword = <$pf>;   my $realpassword = <$pf>;
  chomp($realpassword);   chomp($realpassword);
  Debug("Password info = $realpassword\n");   Debug("Password info = $realpassword\n");
  return $realpassword;   my ($authtype, $contentpwd) = split(/:/, $realpassword);
    Debug("Authtype = $authtype, content = $contentpwd\n");
    return "$authtype:$contentpwd";     
     } else {      } else {
  Debug("Returning nouser");   Debug("Returning nouser");
  return "nouser";   return "nouser";
Line 4155  sub GetAuthType { Line 5193  sub GetAuthType {
 #                user.  #                user.
 #     0        - The domain,user,password triplet is not a valid user.  #     0        - The domain,user,password triplet is not a valid user.
 #  #
 sub ValidateUser {  sub validate_user {
     my $domain  = shift;      my ($domain, $user, $password) = @_;
     my $user    = shift;  
     my $password= shift;  
   
     # Why negative ~pi you may well ask?  Well this function is about      # Why negative ~pi you may well ask?  Well this function is about
     # authentication, and therefore very important to get right.      # authentication, and therefore very important to get right.
Line 4167  sub ValidateUser { Line 5204  sub ValidateUser {
     # At the end of this function. I'll ensure that it's not still that      # At the end of this function. I'll ensure that it's not still that
     # value so we don't just wind up returning some accidental value      # value so we don't just wind up returning some accidental value
     # as a result of executing an unforseen code path that      # as a result of executing an unforseen code path that
     # did not set $validated.      # did not set $validated.  At the end of valid execution paths,
       # validated shoule be 1 for success or 0 for failuer.
   
     my $validated = -3.14159;      my $validated = -3.14159;
   
Line 4175  sub ValidateUser { Line 5213  sub ValidateUser {
     #  the user has been assigned.  If the authentication type is      #  the user has been assigned.  If the authentication type is
     #  "nouser", the user does not exist so we will return 0.      #  "nouser", the user does not exist so we will return 0.
   
     my $contents = GetAuthType($domain, $user);      my $contents = &get_auth_type($domain, $user);
     my ($howpwd, $contentpwd) = split(/:/, $contents);      my ($howpwd, $contentpwd) = split(/:/, $contents);
   
     my $null = pack("C",0); # Used by kerberos auth types.      my $null = pack("C",0); # Used by kerberos auth types.
Line 4215  sub ValidateUser { Line 5253  sub ValidateUser {
    $password);     $password);
  if(!$k4error) {   if(!$k4error) {
     $validated = 1;      $validated = 1;
  }   } else {
  else {  
     $validated = 0;      $validated = 0;
     &logthis('krb4: '.$user.', '.$contentpwd.', '.      &logthis('krb4: '.$user.', '.$contentpwd.', '.
      &Authen::Krb4::get_err_txt($Authen::Krb4::error));       &Authen::Krb4::get_err_txt($Authen::Krb4::error));
  }   }
     }      } else {
     else {  
  $validated = 0; # Password has a match with null.   $validated = 0; # Password has a match with null.
     }      }
  }   } elsif ($howpwd eq "krb5") { # User is in kerberos 5 auth. domain.
  elsif ($howpwd eq "krb5") { # User is in kerberos 5 auth. domain.  
     if(!($password =~ /$null/)) { # Null password not allowed.      if(!($password =~ /$null/)) { # Null password not allowed.
  my $krbclient = &Authen::Krb5::parse_name($user.'@'   my $krbclient = &Authen::Krb5::parse_name($user.'@'
   .$contentpwd);    .$contentpwd);
Line 4234  sub ValidateUser { Line 5269  sub ValidateUser {
  my $krbserver  = &Authen::Krb5::parse_name($krbservice);   my $krbserver  = &Authen::Krb5::parse_name($krbservice);
  my $credentials= &Authen::Krb5::cc_default();   my $credentials= &Authen::Krb5::cc_default();
  $credentials->initialize($krbclient);   $credentials->initialize($krbclient);
  my $krbreturn  = &Authen::KRb5::get_in_tkt_with_password($krbclient,   my $krbreturn  = &Authen::Krb5::get_in_tkt_with_password($krbclient,
  $krbserver,   $krbserver,
  $password,   $password,
  $credentials);   $credentials);
  $validated = ($krbreturn == 1);   $validated = ($krbreturn == 1);
     }      } else {
     else {  
  $validated = 0;   $validated = 0;
     }      }
  }   } elsif ($howpwd eq "localauth") { 
  elsif ($howpwd eq "localauth") {   
     #  Authenticate via installation specific authentcation method:      #  Authenticate via installation specific authentcation method:
     $validated = &localauth::localauth($user,       $validated = &localauth::localauth($user, 
        $password,          $password, 
        $contentpwd);         $contentpwd);
  }   } else { # Unrecognized auth is also bad.
  else { # Unrecognized auth is also bad.  
     $validated = 0;      $validated = 0;
  }   }
     } else {      } else {
Line 4261  sub ValidateUser { Line 5293  sub ValidateUser {
     #      #
   
     unless ($validated != -3.14159) {      unless ($validated != -3.14159) {
  die "ValidateUser - failed to set the value of validated";   #  I >really really< want to know if this happens.
    #  since it indicates that user authentication is badly
    #  broken in some code path.
           #
    die "ValidateUser - failed to set the value of validated $domain, $user $password";
     }      }
     return $validated;      return $validated;
 }  }
   
 #  
 #    Add a line to the subscription list?  
 #  
 sub addline {  sub addline {
     my ($fname,$hostid,$ip,$newline)=@_;      my ($fname,$hostid,$ip,$newline)=@_;
     my $contents;      my $contents;
Line 4288  sub addline { Line 5322  sub addline {
     $sh->close();      $sh->close();
     return $found;      return $found;
 }  }
 #  
 #    Get chat messages.  sub get_chat {
 #  
 sub getchat {  
     my ($cdom,$cname,$udom,$uname)=@_;      my ($cdom,$cname,$udom,$uname)=@_;
     my %hash;      my %hash;
     my $proname=&propath($cdom,$cname);      my $proname=&propath($cdom,$cname);
Line 4315  sub getchat { Line 5347  sub getchat {
     }      }
     return (@participants,@entries);      return (@participants,@entries);
 }  }
 #  
 #   Add a chat message  sub chat_add {
 #  
 sub chatadd {  
     my ($cdom,$cname,$newchat)=@_;      my ($cdom,$cname,$newchat)=@_;
     my %hash;      my %hash;
     my $proname=&propath($cdom,$cname);      my $proname=&propath($cdom,$cname);
Line 4357  sub chatadd { Line 5387  sub chatadd {
 sub unsub {  sub unsub {
     my ($fname,$clientip)=@_;      my ($fname,$clientip)=@_;
     my $result;      my $result;
       my $unsubs = 0; # Number of successful unsubscribes:
   
   
       # An old way subscriptions were handled was to have a 
       # subscription marker file:
   
       Debug("Attempting unlink of $fname.$clientname");
     if (unlink("$fname.$clientname")) {      if (unlink("$fname.$clientname")) {
  $result="ok\n";   $unsubs++; # Successful unsub via marker file.
     } else {      } 
  $result="not_subscribed\n";  
     }      # The more modern way to do it is to have a subscription list
       # file:
   
     if (-e "$fname.subscription") {      if (-e "$fname.subscription") {
  my $found=&addline($fname,$clientname,$clientip,'');   my $found=&addline($fname,$clientname,$clientip,'');
  if ($found) { $result="ok\n"; }   if ($found) { 
       $unsubs++;
    }
       } 
   
       #  If either or both of these mechanisms succeeded in unsubscribing a 
       #  resource we can return ok:
   
       if($unsubs) {
    $result = "ok\n";
     } else {      } else {
  if ($result != "ok\n") { $result="not_subscribed\n"; }   $result = "not_subscribed\n";
     }      }
   
     return $result;      return $result;
 }  }
   
Line 4376  sub currentversion { Line 5425  sub currentversion {
     my $version=-1;      my $version=-1;
     my $ulsdir='';      my $ulsdir='';
     if ($fname=~/^(.+)\/[^\/]+$/) {      if ($fname=~/^(.+)\/[^\/]+$/) {
  $ulsdir=$1;         $ulsdir=$1;
     }      }
     my ($fnamere1,$fnamere2);      my ($fnamere1,$fnamere2);
     # remove version if already specified      # remove version if already specified
Line 4433  sub subscribe { Line 5482  sub subscribe {
                     symlink($root.'.'.$extension,                      symlink($root.'.'.$extension,
                             $root.'.'.$currentversion.'.'.$extension);                              $root.'.'.$currentversion.'.'.$extension);
                     unless ($extension=~/\.meta$/) {                      unless ($extension=~/\.meta$/) {
  symlink($root.'.'.$extension.'.meta',                         symlink($root.'.'.$extension.'.meta',
  $root.'.'.$currentversion.'.'.$extension.'.meta');                              $root.'.'.$currentversion.'.'.$extension.'.meta');
     }      }
                 }                  }
             }              }
Line 4464  sub subscribe { Line 5513  sub subscribe {
     }      }
     return $result;      return $result;
 }  }
   #  Change the passwd of a unix user.  The caller must have
   #  first verified that the user is a loncapa user.
   #
   # Parameters:
   #    user      - Unix user name to change.
   #    pass      - New password for the user.
   # Returns:
   #    ok    - if success
   #    other - Some meaningfule error message string.
   # NOTE:
   #    invokes a setuid script to change the passwd.
   sub change_unix_password {
       my ($user, $pass) = @_;
   
       &Debug("change_unix_password");
       my $execdir=$perlvar{'lonDaemons'};
       &Debug("Opening lcpasswd pipeline");
       my $pf = IO::File->new("|$execdir/lcpasswd > "
      ."$perlvar{'lonDaemons'}"
      ."/logs/lcpasswd.log");
       print $pf "$user\n$pass\n$pass\n";
       close $pf;
       my $err = $?;
       return ($err < @passwderrors) ? $passwderrors[$err] : 
    "pwchange_falure - unknown error";
   
       
   }
   
   
 sub make_passwd_file {  sub make_passwd_file {
     my ($uname, $umode,$npass,$passfilename)=@_;      my ($uname, $umode,$npass,$passfilename)=@_;
Line 4471  sub make_passwd_file { Line 5549  sub make_passwd_file {
     if ($umode eq 'krb4' or $umode eq 'krb5') {      if ($umode eq 'krb4' or $umode eq 'krb5') {
  {   {
     my $pf = IO::File->new(">$passfilename");      my $pf = IO::File->new(">$passfilename");
     print $pf "$umode:$npass\n";      if ($pf) {
    print $pf "$umode:$npass\n";
       } else {
    $result = "pass_file_failed_error";
       }
  }   }
     } elsif ($umode eq 'internal') {      } elsif ($umode eq 'internal') {
  my $salt=time;   my $salt=time;
Line 4480  sub make_passwd_file { Line 5562  sub make_passwd_file {
  {   {
     &Debug("Creating internal auth");      &Debug("Creating internal auth");
     my $pf = IO::File->new(">$passfilename");      my $pf = IO::File->new(">$passfilename");
     print $pf "internal:$ncpass\n";       if($pf) {
    print $pf "internal:$ncpass\n"; 
       } else {
    $result = "pass_file_failed_error";
       }
  }   }
     } elsif ($umode eq 'localauth') {      } elsif ($umode eq 'localauth') {
  {   {
     my $pf = IO::File->new(">$passfilename");      my $pf = IO::File->new(">$passfilename");
     print $pf "localauth:$npass\n";      if($pf) {
    print $pf "localauth:$npass\n";
       } else {
    $result = "pass_file_failed_error";
       }
  }   }
     } elsif ($umode eq 'unix') {      } elsif ($umode eq 'unix') {
  #   {
  #  Don't allow the creation of privileged accounts!!! that would      #
  #  be real bad!!!      #  Don't allow the creation of privileged accounts!!! that would
  #      #  be real bad!!!
  my $uid = getpwnam($uname);      #
  if((defined $uid) && ($uid == 0)) {      my $uid = getpwnam($uname);
     &logthis(">>>Attempted add of privileged account blocked<<<");      if((defined $uid) && ($uid == 0)) {
     return "no_priv_account_error\n";   &logthis(">>>Attempted to create privilged account blocked");
  }   return "no_priv_account_error\n";
       }
   
  #      my $execpath       ="$perlvar{'lonDaemons'}/"."lcuseradd";
  my $execpath="$perlvar{'lonDaemons'}/"."lcuseradd";  
       my $lc_error_file  = $execdir."/tmp/lcuseradd".$$.".status";
  &Debug("Executing external: ".$execpath);      {
  &Debug("user  = ".$uname.", Password =". $npass);   &Debug("Executing external: ".$execpath);
  my $se = IO::File->new("|$execpath > $perlvar{'lonDaemons'}/logs/lcuseradd.log");   &Debug("user  = ".$uname.", Password =". $npass);
  print $se "$uname\n";   my $se = IO::File->new("|$execpath > $perlvar{'lonDaemons'}/logs/lcuseradd.log");
  print $se "$npass\n";   print $se "$uname\n";
  print $se "$npass\n";   print $se "$npass\n";
    print $se "$npass\n";
    print $se "$lc_error_file\n"; # Status -> unique file.
       }
       if (-r $lc_error_file) {
    &Debug("Opening error file: $lc_error_file");
    my $error = IO::File->new("< $lc_error_file");
    my $useraddok = <$error>;
    $error->close;
    unlink($lc_error_file);
   
    chomp $useraddok;
   
  my $useraddok = $?;   if($useraddok > 0) {
  if($useraddok > 0) {      my $error_text = &lcuseraddstrerror($useraddok);
     &logthis("Failed lcuseradd: ".&lcuseraddstrerror($useraddok));      &logthis("Failed lcuseradd: $error_text");
       $result = "lcuseradd_failed:$error_text\n";
    }  else {
       my $pf = IO::File->new(">$passfilename");
       if($pf) {
    print $pf "unix:\n";
       } else {
    $result = "pass_file_failed_error";
       }
    }
       }  else {
    &Debug("Could not locate lcuseradd error: $lc_error_file");
    $result="bug_lcuseradd_no_output_file";
       }
  }   }
  my $pf = IO::File->new(">$passfilename");  
  print $pf "unix:\n";  
    
     } elsif ($umode eq 'none') {      } elsif ($umode eq 'none') {
  {   {
     my $pf = IO::File->new(">$passfilename");      my $pf = IO::File->new("> $passfilename");
     print $pf "none:\n";      if($pf) {
    print $pf "none:\n";
       } else {
    $result = "pass_file_failed_error";
       }
  }   }
     } else {      } else {
  $result="auth_mode_error\n";   $result="auth_mode_error\n";
Line 4526  sub make_passwd_file { Line 5642  sub make_passwd_file {
     return $result;      return $result;
 }  }
   
   sub convert_photo {
       my ($start,$dest)=@_;
       system("convert $start $dest");
   }
   
 sub sethost {  sub sethost {
     my ($remotereq) = @_;      my ($remotereq) = @_;
     my (undef,$hostid)=split(/:/,$remotereq);      my (undef,$hostid)=split(/:/,$remotereq);
     if (!defined($hostid)) { $hostid=$perlvar{'lonHostID'}; }      if (!defined($hostid)) { $hostid=$perlvar{'lonHostID'}; }
     if ($hostip{$perlvar{'lonHostID'}} eq $hostip{$hostid}) {      if ($hostip{$perlvar{'lonHostID'}} eq $hostip{$hostid}) {
  $currenthostid=$hostid;   $currenthostid  =$hostid;
  $currentdomainid=$hostdom{$hostid};   $currentdomainid=$hostdom{$hostid};
  &logthis("Setting hostid to $hostid, and domain to $currentdomainid");   &logthis("Setting hostid to $hostid, and domain to $currentdomainid");
     } else {      } else {
Line 4547  sub version { Line 5668  sub version {
     $remoteVERSION=(split(/:/,$userinput))[1];      $remoteVERSION=(split(/:/,$userinput))[1];
     return "version:$VERSION";      return "version:$VERSION";
 }  }
 ############## >>>>>>>>>>>>>>>>>>>>>>>>>> FUTUREWORK <<<<<<<<<<<<<<<<<<<<<<<<<<<<  
 #There is a copy of this in lonnet.pm  #There is a copy of this in lonnet.pm
 #   Can we hoist these lil' things out into common places?  
 #  
 sub userload {  sub userload {
     my $numusers=0;      my $numusers=0;
     {      {
Line 4573  sub userload { Line 5692  sub userload {
     return $userloadpercent;      return $userloadpercent;
 }  }
   
   # Routines for serializing arrays and hashes (copies from lonnet)
   
   sub array2str {
     my (@array) = @_;
     my $result=&arrayref2str(\@array);
     $result=~s/^__ARRAY_REF__//;
     $result=~s/__END_ARRAY_REF__$//;
     return $result;
   }
                                                                                    
   sub arrayref2str {
     my ($arrayref) = @_;
     my $result='__ARRAY_REF__';
     foreach my $elem (@$arrayref) {
       if(ref($elem) eq 'ARRAY') {
         $result.=&arrayref2str($elem).'&';
       } elsif(ref($elem) eq 'HASH') {
         $result.=&hashref2str($elem).'&';
       } elsif(ref($elem)) {
         #print("Got a ref of ".(ref($elem))." skipping.");
       } else {
         $result.=&escape($elem).'&';
       }
     }
     $result=~s/\&$//;
     $result .= '__END_ARRAY_REF__';
     return $result;
   }
                                                                                    
   sub hash2str {
     my (%hash) = @_;
     my $result=&hashref2str(\%hash);
     $result=~s/^__HASH_REF__//;
     $result=~s/__END_HASH_REF__$//;
     return $result;
   }
                                                                                    
   sub hashref2str {
     my ($hashref)=@_;
     my $result='__HASH_REF__';
     foreach (sort(keys(%$hashref))) {
       if (ref($_) eq 'ARRAY') {
         $result.=&arrayref2str($_).'=';
       } elsif (ref($_) eq 'HASH') {
         $result.=&hashref2str($_).'=';
       } elsif (ref($_)) {
         $result.='=';
         #print("Got a ref of ".(ref($_))." skipping.");
       } else {
           if ($_) {$result.=&escape($_).'=';} else { last; }
       }
   
       if(ref($hashref->{$_}) eq 'ARRAY') {
         $result.=&arrayref2str($hashref->{$_}).'&';
       } elsif(ref($hashref->{$_}) eq 'HASH') {
         $result.=&hashref2str($hashref->{$_}).'&';
       } elsif(ref($hashref->{$_})) {
          $result.='&';
         #print("Got a ref of ".(ref($hashref->{$_}))." skipping.");
       } else {
         $result.=&escape($hashref->{$_}).'&';
       }
     }
     $result=~s/\&$//;
     $result .= '__END_HASH_REF__';
     return $result;
   }
   
 # ----------------------------------- POD (plain old documentation, CPAN style)  # ----------------------------------- POD (plain old documentation, CPAN style)
   
 =head1 NAME  =head1 NAME
Line 4780  Place in B<logs/lond.log> Line 5967  Place in B<logs/lond.log>
   
 stores hash in namespace  stores hash in namespace
   
 =item rolesput  =item rolesputy
   
 put a role into a user's environment  put a role into a user's environment
   
Removed from v.1.178.2.15  
changed lines
  Added in v.1.288

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>