[BACK]Return to lond CVS log [TXT] [DIR] Up to [LON-CAPA] / loncom

Diff for /loncom/lond between versions 1.447 and 1.489.2.40

version 1.447, 2010/07/17 20:01:56 version 1.489.2.40, 2021/02/10 15:05:51
Line 33  use strict; Line 33  use strict;
 use lib '/home/httpd/lib/perl/';  use lib '/home/httpd/lib/perl/';
 use LONCAPA;  use LONCAPA;
 use LONCAPA::Configuration;  use LONCAPA::Configuration;
   use LONCAPA::Lond;
   
 use IO::Socket;  use IO::Socket;
 use IO::File;  use IO::File;
Line 52  use LONCAPA::lonlocal; Line 53  use LONCAPA::lonlocal;
 use LONCAPA::lonssl;  use LONCAPA::lonssl;
 use Fcntl qw(:flock);  use Fcntl qw(:flock);
 use Apache::lonnet;  use Apache::lonnet;
   use Mail::Send;
   use Crypt::Eksblowfish::Bcrypt;
   use Digest::SHA;
   use Encode;
   
 my $DEBUG = 0;       # Non zero to enable debug log entries.  my $DEBUG = 0;       # Non zero to enable debug log entries.
   
Line 66  my $currentdomainid; Line 71  my $currentdomainid;
 my $client;  my $client;
 my $clientip; # IP address of client.  my $clientip; # IP address of client.
 my $clientname; # LonCAPA name of client.  my $clientname; # LonCAPA name of client.
 my $clientversion;              # LonCAPA version running on client  my $clientversion;              # LonCAPA version running on client.
 my @clientdoms;                 # Array of domains on $clientip  my $clienthomedom;              # LonCAPA domain of homeID for client. 
                                   # primary library server. 
   
 my $server;  my $server;
   
Line 89  my %managers;   # Ip -> manager names Line 95  my %managers;   # Ip -> manager names
   
 my %perlvar; # Will have the apache conf defined perl vars.  my %perlvar; # Will have the apache conf defined perl vars.
   
   my $dist;
   
 #  #
 #   The hash below is used for command dispatching, and is therefore keyed on the request keyword.  #   The hash below is used for command dispatching, and is therefore keyed on the request keyword.
 #    Each element of the hash contains a reference to an array that contains:  #    Each element of the hash contains a reference to an array that contains:
Line 124  my @passwderrors = ("ok", Line 132  my @passwderrors = ("ok",
    "pwchange_failure - lcpasswd Error filename is invalid");     "pwchange_failure - lcpasswd Error filename is invalid");
   
   
 #  The array below are lcuseradd error strings.:  
   
 my $lastadderror = 13;  
 my @adderrors    = ("ok",  
     "User ID mismatch, lcuseradd must run as user www",  
     "lcuseradd Incorrect number of command line parameters must be 3",  
     "lcuseradd Incorrect number of stdinput lines, must be 3",  
     "lcuseradd Too many other simultaneous pwd changes in progress",  
     "lcuseradd User does not exist",  
     "lcuseradd Unable to make www member of users's group",  
     "lcuseradd Unable to su to root",  
     "lcuseradd Unable to set password",  
     "lcuseradd Username has invalid characters",  
     "lcuseradd Password has an invalid character",  
     "lcuseradd User already exists",  
     "lcuseradd Could not add user.",  
     "lcuseradd Password mismatch");  
   
   
 # This array are the errors from lcinstallfile:  # This array are the errors from lcinstallfile:
   
 my @installerrors = ("ok",  my @installerrors = ("ok",
      "Initial user id of client not that of www",       "Initial user id of client not that of www",
      "Usage error, not enough command line arguments",       "Usage error, not enough command line arguments",
      "Source file name does not exist",       "Source filename does not exist",
      "Destination file name does not exist",       "Destination filename does not exist",
      "Some file operation failed",       "Some file operation failed",
      "Invalid table filename."       "Invalid table filename."
      );       );
Line 418  sub ReadManagerTable { Line 407  sub ReadManagerTable {
   
    my $tablename = $perlvar{'lonTabDir'}."/managers.tab";     my $tablename = $perlvar{'lonTabDir'}."/managers.tab";
    if (!open (MANAGERS, $tablename)) {     if (!open (MANAGERS, $tablename)) {
       logthis('<font color="red">No manager table.  Nobody can manage!!</font>');         my $hostname = &Apache::lonnet::hostname($perlvar{'lonHostID'});
       return;         if (&Apache::lonnet::is_LC_dns($hostname)) {
              &logthis('<font color="red">No manager table.  Nobody can manage!!</font>');
          }
          return;
    }     }
    while(my $host = <MANAGERS>) {     while(my $host = <MANAGERS>) {
       chomp($host);        chomp($host);
Line 444  sub ReadManagerTable { Line 436  sub ReadManagerTable {
          }           }
       } else {        } else {
          logthis('<font color="green"> existing host'." $host</font>\n");           logthis('<font color="green"> existing host'." $host</font>\n");
          $managers{&Apache::lonnet::get_host_ip($host)} = $host;  # Use info from cluster tab if clumemeber           $managers{&Apache::lonnet::get_host_ip($host)} = $host;  # Use info from cluster tab if cluster memeber
       }        }
    }     }
 }  }
Line 506  sub AdjustHostContents { Line 498  sub AdjustHostContents {
     my $me        = $perlvar{'lonHostID'};      my $me        = $perlvar{'lonHostID'};
   
     foreach my $line (split(/\n/,$contents)) {      foreach my $line (split(/\n/,$contents)) {
  if(!(($line eq "") || ($line =~ /^ *\#/) || ($line =~ /^ *$/))) {   if(!(($line eq "") || ($line =~ /^ *\#/) || ($line =~ /^ *$/) ||
                ($line =~ /^\s*\^/))) {
     chomp($line);      chomp($line);
     my ($id,$domain,$role,$name,$ip,$maxcon,$idleto,$mincon)=split(/:/,$line);      my ($id,$domain,$role,$name,$ip,$maxcon,$idleto,$mincon)=split(/:/,$line);
     if ($id eq $me) {      if ($id eq $me) {
Line 594  sub InstallFile { Line 587  sub InstallFile {
 #  #
 #   ConfigFileFromSelector: converts a configuration file selector  #   ConfigFileFromSelector: converts a configuration file selector
 #                 into a configuration file pathname.  #                 into a configuration file pathname.
 #                 It's probably no longer necessary to preserve  #                 Supports the following file selectors: 
 #                 special handling of hosts or domain as those  #                 hosts, domain, dns_hosts, dns_domain  
 #                 files have been superceded by dns_hosts, dns_domain.  
 #                 The default action is just to prepend the directory  
 #                 and append .tab  
 #  #
 #  #
 #  Parameters:  #  Parameters:
Line 611  sub ConfigFileFromSelector { Line 601  sub ConfigFileFromSelector {
     my $tablefile;      my $tablefile;
   
     my $tabledir = $perlvar{'lonTabDir'}.'/';      my $tabledir = $perlvar{'lonTabDir'}.'/';
     if ($selector eq "hosts") {      if (($selector eq "hosts") || ($selector eq "domain") || 
  $tablefile = $tabledir."hosts.tab";          ($selector eq "dns_hosts") || ($selector eq "dns_domain")) {
     } elsif ($selector eq "domain") {  
  $tablefile = $tabledir."domain.tab";  
     } else {  
  $tablefile =  $tabledir.$selector.'.tab';   $tablefile =  $tabledir.$selector.'.tab';
     }      }
     return $tablefile;      return $tablefile;
   
 }  }
 #  #
 #   PushFile:  Called to do an administrative push of a file.  #   PushFile:  Called to do an administrative push of a file.
Line 637  sub ConfigFileFromSelector { Line 623  sub ConfigFileFromSelector {
 #     String to send to client ("ok" or "refused" if bad file).  #     String to send to client ("ok" or "refused" if bad file).
 #  #
 sub PushFile {  sub PushFile {
     my $request = shift;          my $request = shift;
     my ($command, $filename, $contents) = split(":", $request, 3);      my ($command, $filename, $contents) = split(":", $request, 3);
     &Debug("PushFile");      &Debug("PushFile");
           
Line 645  sub PushFile { Line 631  sub PushFile {
     #  supported:      #  supported:
     #   hosts.tab  ($filename eq host).      #   hosts.tab  ($filename eq host).
     #   domain.tab ($filename eq domain).      #   domain.tab ($filename eq domain).
       #   dns_hosts.tab ($filename eq dns_host).
       #   dns_domain.tab ($filename eq dns_domain). 
     # Construct the destination filename or reject the request.      # Construct the destination filename or reject the request.
     #      #
     # lonManage is supposed to ensure this, however this session could be      # lonManage is supposed to ensure this, however this session could be
Line 665  sub PushFile { Line 653  sub PushFile {
   
     if($filename eq "host") {      if($filename eq "host") {
  $contents = AdjustHostContents($contents);   $contents = AdjustHostContents($contents);
       } elsif ($filename eq 'dns_host' || $filename eq 'dns_domain') {
           if ($contents eq '') {
               &logthis('<font color="red"> Pushfile: unable to install '
                       .$tablefile." - no data received from push. </font>");
               return 'error: push had no data';
           }
           if (&Apache::lonnet::get_host_ip($clientname)) {
               my $clienthost = &Apache::lonnet::hostname($clientname);
               if ($managers{$clientip} eq $clientname) {
                   my $clientprotocol = $Apache::lonnet::protocol{$clientname};
                   $clientprotocol = 'http' if ($clientprotocol ne 'https');
                   my $url = '/adm/'.$filename;
                   $url =~ s{_}{/};
                   my $ua=new LWP::UserAgent;
                   $ua->timeout(60);
                   my $request=new HTTP::Request('GET',"$clientprotocol://$clienthost$url");
                   my $response=$ua->request($request);
                   if ($response->is_error()) {
                       &logthis('<font color="red"> Pushfile: unable to install '
                               .$tablefile." - error attempting to pull data. </font>");
                       return 'error: pull failed';
                   } else {
                       my $result = $response->content;
                       chomp($result);
                       unless ($result eq $contents) {
                           &logthis('<font color="red"> Pushfile: unable to install '
                                   .$tablefile." - pushed data and pulled data differ. </font>");
                           my $pushleng = length($contents);
                           my $pullleng = length($result);
                           if ($pushleng != $pullleng) {
                               return "error: $pushleng vs $pullleng bytes";
                           } else {
                               return "error: mismatch push and pull";
                           }
                       }
                   }
               }
           }
     }      }
   
     #  Install the new file:      #  Install the new file:
Line 676  sub PushFile { Line 702  sub PushFile {
  return "error:$!";   return "error:$!";
     } else {      } else {
  &logthis('<font color="green"> Installed new '.$tablefile   &logthis('<font color="green"> Installed new '.$tablefile
  ."</font>");   ." - transaction by: $clientname ($clientip)</font>");
           my $adminmail = $perlvar{'lonAdmEMail'};
           my $admindom = &Apache::lonnet::host_domain($perlvar{'lonHostID'});
           if ($admindom ne '') {
               my %domconfig =
                   &Apache::lonnet::get_dom('configuration',['contacts'],$admindom);
               if (ref($domconfig{'contacts'}) eq 'HASH') {
                   if ($domconfig{'contacts'}{'adminemail'} ne '') {
                       $adminmail = $domconfig{'contacts'}{'adminemail'};
                   }
               }
           }
           if ($adminmail =~ /^[^\@]+\@[^\@]+$/) {
               my $msg = new Mail::Send;
               $msg->to($adminmail);
               $msg->subject('LON-CAPA DNS update on '.$perlvar{'lonHostID'});
               $msg->add('Content-type','text/plain; charset=UTF-8');
               if (my $fh = $msg->open()) {
                   print $fh 'Update to '.$tablefile.' from Cluster Manager '.
                             "$clientname ($clientip)\n";
                   $fh->close;
               }
           }
     }      }
   
   
     #  Indicate success:      #  Indicate success:
     
     return "ok";      return "ok";
Line 1072  sub pong_handler { Line 1118  sub pong_handler {
 #  Implicit Inputs:  #  Implicit Inputs:
 #      $currenthostid - Global variable that carries the name of the host  #      $currenthostid - Global variable that carries the name of the host
 #                       known as.  #                       known as.
 #      $clientname    - Global variable that carries the name of the hsot we're connected to.  #      $clientname    - Global variable that carries the name of the host we're connected to.
 #  Returns:  #  Returns:
 #      1       - Ok to continue processing.  #      1       - Ok to continue processing.
 #      0       - Program should exit.  #      0       - Program should exit.
Line 1111  sub establish_key_handler { Line 1157  sub establish_key_handler {
 #  Implicit Inputs:  #  Implicit Inputs:
 #      $currenthostid - Global variable that carries the name of the host  #      $currenthostid - Global variable that carries the name of the host
 #                       known as.  #                       known as.
 #      $clientname    - Global variable that carries the name of the hsot we're connected to.  #      $clientname    - Global variable that carries the name of the host we're connected to.
 #  Returns:  #  Returns:
 #      1       - Ok to continue processing.  #      1       - Ok to continue processing.
 #      0       - Program should exit.  #      0       - Program should exit.
Line 1120  sub establish_key_handler { Line 1166  sub establish_key_handler {
 sub load_handler {  sub load_handler {
     my ($cmd, $tail, $replyfd) = @_;      my ($cmd, $tail, $replyfd) = @_;
   
   
   
    # Get the load average from /proc/loadavg and calculate it as a percentage of     # Get the load average from /proc/loadavg and calculate it as a percentage of
    # the allowed load limit as set by the perl global variable lonLoadLim     # the allowed load limit as set by the perl global variable lonLoadLim
   
Line 1148  sub load_handler { Line 1196  sub load_handler {
 #  Implicit Inputs:  #  Implicit Inputs:
 #      $currenthostid - Global variable that carries the name of the host  #      $currenthostid - Global variable that carries the name of the host
 #                       known as.  #                       known as.
 #      $clientname    - Global variable that carries the name of the hsot we're connected to.  #      $clientname    - Global variable that carries the name of the host we're connected to.
 #  Returns:  #  Returns:
 #      1       - Ok to continue processing.  #      1       - Ok to continue processing.
 #      0       - Program should exit  #      0       - Program should exit
Line 1376  sub du2_handler { Line 1424  sub du2_handler {
 #    selected directory the filename followed by the full output of  #    selected directory the filename followed by the full output of
 #    the stat function is returned.  The returned info for each  #    the stat function is returned.  The returned info for each
 #    file are separated by ':'.  The stat fields are separated by &'s.  #    file are separated by ':'.  The stat fields are separated by &'s.
   #
   #    If the requested path contains /../ or is:
   #
   #    1. for a directory, and the path does not begin with one of:
   #        (a) /home/httpd/html/res/<domain>
   #        (b) /home/httpd/html/userfiles/
   #        (c) /home/httpd/lonUsers/<domain>/<1>/<2>/<3>/<username>/userfiles
   #    or is:
   #
   #    2. for a file, and the path (after prepending) does not begin with one of:
   #        (a) /home/httpd/lonUsers/<domain>/<1>/<2>/<3>/<username>/
   #        (b) /home/httpd/html/res/<domain>/<username>/
   #        (c) /home/httpd/html/userfiles/<domain>/<username>/
   #
   #    the response will be "refused".
   #
 # Parameters:  # Parameters:
 #    $cmd        - The command that dispatched us (ls).  #    $cmd        - The command that dispatched us (ls).
 #    $ulsdir     - The directory path to list... I'm not sure what this  #    $ulsdir     - The directory path to list... I'm not sure what this
Line 1397  sub ls_handler { Line 1461  sub ls_handler {
     my $rights;      my $rights;
     my $ulsout='';      my $ulsout='';
     my $ulsfn;      my $ulsfn;
       if ($ulsdir =~m{/\.\./}) {
           &Failure($client,"refused\n",$userinput);
           return 1;
       }
     if (-e $ulsdir) {      if (-e $ulsdir) {
  if(-d $ulsdir) {   if(-d $ulsdir) {
               unless (($ulsdir =~ m{^/home/httpd/html/(res/$LONCAPA::match_domain|userfiles/)}) ||
                       ($ulsdir =~ m{^/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_name/userfiles})) {
                   &Failure($client,"refused\n",$userinput);
                   return 1;
               }
     if (opendir(LSDIR,$ulsdir)) {      if (opendir(LSDIR,$ulsdir)) {
  while ($ulsfn=readdir(LSDIR)) {   while ($ulsfn=readdir(LSDIR)) {
     undef($obs);      undef($obs);
Line 1422  sub ls_handler { Line 1495  sub ls_handler {
  closedir(LSDIR);   closedir(LSDIR);
     }      }
  } else {   } else {
               unless (($ulsdir =~ m{^/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_name/}) ||
                       ($ulsdir =~ m{^/home/httpd/html/(?:res|userfiles)/$LONCAPA::match_domain/$LONCAPA::match_name/})) { 
                   &Failure($client,"refused\n",$userinput);
                   return 1;
               }
     my @ulsstats=stat($ulsdir);      my @ulsstats=stat($ulsdir);
     $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':';      $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':';
  }   }
Line 1446  sub ls_handler { Line 1524  sub ls_handler {
 #    selected directory the filename followed by the full output of  #    selected directory the filename followed by the full output of
 #    the stat function is returned.  The returned info for each  #    the stat function is returned.  The returned info for each
 #    file are separated by ':'.  The stat fields are separated by &'s.  #    file are separated by ':'.  The stat fields are separated by &'s.
   #
   #    If the requested path contains /../ or is:
   #
   #    1. for a directory, and the path does not begin with one of:
   #        (a) /home/httpd/html/res/<domain>
   #        (b) /home/httpd/html/userfiles/
   #        (c) /home/httpd/lonUsers/<domain>/<1>/<2>/<3>/<username>/userfiles
   #    or is:
   #
   #    2. for a file, and the path (after prepending) does not begin with one of:
   #        (a) /home/httpd/lonUsers/<domain>/<1>/<2>/<3>/<username>/
   #        (b) /home/httpd/html/res/<domain>/<username>/
   #        (c) /home/httpd/html/userfiles/<domain>/<username>/
   #
   #    the response will be "refused".
   #
 # Parameters:  # Parameters:
 #    $cmd        - The command that dispatched us (ls).  #    $cmd        - The command that dispatched us (ls).
 #    $ulsdir     - The directory path to list... I'm not sure what this  #    $ulsdir     - The directory path to list... I'm not sure what this
Line 1466  sub ls2_handler { Line 1560  sub ls2_handler {
     my $rights;      my $rights;
     my $ulsout='';      my $ulsout='';
     my $ulsfn;      my $ulsfn;
       if ($ulsdir =~m{/\.\./}) {
           &Failure($client,"refused\n",$userinput);
           return 1;
       }
     if (-e $ulsdir) {      if (-e $ulsdir) {
         if(-d $ulsdir) {          if(-d $ulsdir) {
               unless (($ulsdir =~ m{^/home/httpd/html/(res/$LONCAPA::match_domain|userfiles/)}) ||
                       ($ulsdir =~ m{^/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_name/userfiles})) {
                   &Failure($client,"refused\n","$userinput");
                   return 1;
               }
             if (opendir(LSDIR,$ulsdir)) {              if (opendir(LSDIR,$ulsdir)) {
                 while ($ulsfn=readdir(LSDIR)) {                  while ($ulsfn=readdir(LSDIR)) {
                     undef($obs);                      undef($obs);
Line 1492  sub ls2_handler { Line 1595  sub ls2_handler {
                 closedir(LSDIR);                  closedir(LSDIR);
             }              }
         } else {          } else {
               unless (($ulsdir =~ m{^/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_name/}) ||
                       ($ulsdir =~ m{^/home/httpd/html/(?:res|userfiles)/$LONCAPA::match_domain/$LONCAPA::match_name/})) {
                   &Failure($client,"refused\n",$userinput);
                   return 1;
               }
             my @ulsstats=stat($ulsdir);              my @ulsstats=stat($ulsdir);
             $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':';              $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':';
         }          }
Line 1508  sub ls2_handler { Line 1616  sub ls2_handler {
 #    selected directory the filename followed by the full output of  #    selected directory the filename followed by the full output of
 #    the stat function is returned.  The returned info for each  #    the stat function is returned.  The returned info for each
 #    file are separated by ':'.  The stat fields are separated by &'s.  #    file are separated by ':'.  The stat fields are separated by &'s.
   #
   #    If the requested path (after prepending) contains /../ or is:
   #
   #    1. for a directory, and the path does not begin with one of:
   #        (a) /home/httpd/html/res/<domain>
   #        (b) /home/httpd/html/userfiles/
   #        (c) /home/httpd/lonUsers/<domain>/<1>/<2>/<3>/<username>/userfiles
   #        (d) /home/httpd/html/priv/<domain> and client is the homeserver
   #
   #    or is:
   #
   #    2. for a file, and the path (after prepending) does not begin with one of:
   #        (a) /home/httpd/lonUsers/<domain>/<1>/<2>/<3>/<username>/
   #        (b) /home/httpd/html/res/<domain>/<username>/
   #        (c) /home/httpd/html/userfiles/<domain>/<username>/
   #        (d) /home/httpd/html/priv/<domain>/<username>/ and client is the homeserver
   #
   #    the response will be "refused".
   #
 # Parameters:  # Parameters:
 #    $cmd        - The command that dispatched us (ls).  #    $cmd        - The command that dispatched us (ls).
 #    $tail       - The tail of the request that invoked us.  #    $tail       - The tail of the request that invoked us.
Line 1547  sub ls3_handler { Line 1674  sub ls3_handler {
     }      }
   
     my $dir_root = $perlvar{'lonDocRoot'};      my $dir_root = $perlvar{'lonDocRoot'};
     if ($getpropath) {      if (($getpropath) || ($getuserdir)) {
         if (($uname =~ /^$LONCAPA::match_name$/) && ($udom =~ /^$LONCAPA::match_domain$/)) {          if (($uname =~ /^$LONCAPA::match_name$/) && ($udom =~ /^$LONCAPA::match_domain$/)) {
             $dir_root = &propath($udom,$uname);              $dir_root = &propath($udom,$uname);
             $dir_root =~ s/\/$//;              $dir_root =~ s/\/$//;
         } else {          } else {
             &Failure($client,"refused\n","$cmd:$tail");              &Failure($client,"refused\n",$userinput);
             return 1;  
         }  
     } elsif ($getuserdir) {  
         if (($uname =~ /^$LONCAPA::match_name$/) && ($udom =~ /^$LONCAPA::match_domain$/)) {  
             my $subdir=$uname.'__';  
             $subdir =~ s/(.)(.)(.).*/$1\/$2\/$3/;  
             $dir_root = $Apache::lonnet::perlvar{'lonUsersDir'}  
                        ."/$udom/$subdir/$uname";  
         } else {  
             &Failure($client,"refused\n","$cmd:$tail");  
             return 1;              return 1;
         }          }
     } elsif ($alternate_root ne '') {      } elsif ($alternate_root ne '') {
Line 1575  sub ls3_handler { Line 1692  sub ls3_handler {
             $ulsdir = $dir_root.'/'.$ulsdir;              $ulsdir = $dir_root.'/'.$ulsdir;
         }          }
     }      }
       if ($ulsdir =~m{/\.\./}) {
           &Failure($client,"refused\n",$userinput);
           return 1;
       }
       my $islocal;
       my @machine_ids = &Apache::lonnet::current_machine_ids();
       if (grep(/^\Q$clientname\E$/,@machine_ids)) {
           $islocal = 1;
       }
     my $obs;      my $obs;
     my $rights;      my $rights;
     my $ulsout='';      my $ulsout='';
     my $ulsfn;      my $ulsfn;
     if (-e $ulsdir) {      if (-e $ulsdir) {
         if(-d $ulsdir) {          if(-d $ulsdir) {
               unless (($getpropath) || ($getuserdir) ||
                       ($ulsdir =~ m{^/home/httpd/html/(res/$LONCAPA::match_domain|userfiles/)}) ||
                       ($ulsdir =~ m{^/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_name/userfiles}) ||
                       (($ulsdir =~ m{^/home/httpd/html/priv/$LONCAPA::match_domain}) && ($islocal))) {
                   &Failure($client,"refused\n",$userinput);
                   return 1;
               }
             if (opendir(LSDIR,$ulsdir)) {              if (opendir(LSDIR,$ulsdir)) {
                 while ($ulsfn=readdir(LSDIR)) {                  while ($ulsfn=readdir(LSDIR)) {
                     undef($obs);                      undef($obs);
Line 1605  sub ls3_handler { Line 1738  sub ls3_handler {
                 closedir(LSDIR);                  closedir(LSDIR);
             }              }
         } else {          } else {
               unless (($getpropath) || ($getuserdir) ||
                       ($ulsdir =~ m{^/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_name/}) ||
                       ($ulsdir =~ m{^/home/httpd/html/(?:res|userfiles)/$LONCAPA::match_domain/$LONCAPA::match_name/}) ||
                       (($ulsdir =~ m{^/home/httpd/html/priv/$LONCAPA::match_domain/$LONCAPA::match_name/}) && ($islocal))) {
                   &Failure($client,"refused\n",$userinput);
                   return 1;
               }
             my @ulsstats=stat($ulsdir);              my @ulsstats=stat($ulsdir);
             $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':';              $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':';
         }          }
Line 1617  sub ls3_handler { Line 1757  sub ls3_handler {
 }  }
 &register_handler("ls3", \&ls3_handler, 0, 1, 0);  &register_handler("ls3", \&ls3_handler, 0, 1, 0);
   
   sub read_lonnet_global {
       my ($cmd,$tail,$client) = @_;
       my $userinput = "$cmd:$tail";
       my $requested = &Apache::lonnet::thaw_unescape($tail);
       my $result;
       my %packagevars = (
                           spareid => \%Apache::lonnet::spareid,
                           perlvar => \%Apache::lonnet::perlvar,
                         );
       my %limit_to = (
                       perlvar => {
                                    lonOtherAuthen => 1,
                                    lonBalancer    => 1,
                                    lonVersion     => 1,
                                    lonSysEMail    => 1,
                                    lonHostID      => 1,
                                    lonRole        => 1,
                                    lonDefDomain   => 1,
                                    lonLoadLim     => 1,
                                    lonUserLoadLim => 1,
                                  }
                     );
       if (ref($requested) eq 'HASH') {
           foreach my $what (keys(%{$requested})) {
               my $response;
               my $items = {};
               if (exists($packagevars{$what})) {
                   if (ref($limit_to{$what}) eq 'HASH') {
                       foreach my $varname (keys(%{$packagevars{$what}})) {
                           if ($limit_to{$what}{$varname}) {
                               $items->{$varname} = $packagevars{$what}{$varname};
                           }
                       }
                   } else {
                       $items = $packagevars{$what};
                   }
                   if ($what eq 'perlvar') {
                       if (!exists($packagevars{$what}{'lonBalancer'})) {
                           if ($dist =~ /^(centos|rhes|fedora|scientific|oracle)/) {
                               my $othervarref=LONCAPA::Configuration::read_conf('httpd.conf');
                               if (ref($othervarref) eq 'HASH') {
                                   $items->{'lonBalancer'} = $othervarref->{'lonBalancer'};
                               }
                           }
                       }
                   }
                   $response = &Apache::lonnet::freeze_escape($items);
               }
               $result .= &escape($what).'='.$response.'&';
           }
       }
       $result =~ s/\&$//;
       &Reply($client,\$result,$userinput);
       return 1;
   }
   &register_handler("readlonnetglobal", \&read_lonnet_global, 0, 1, 0);
   
   sub server_devalidatecache_handler {
       my ($cmd,$tail,$client) = @_;
       my $userinput = "$cmd:$tail";
       my $items = &unescape($tail);
       my @cached = split(/\&/,$items);
       foreach my $key (@cached) {
           if ($key =~ /:/) {
               my ($name,$id) = map { &unescape($_); } split(/:/,$key);
               &Apache::lonnet::devalidate_cache_new($name,$id);
           }
       }
       my $result = 'ok';
       &Reply($client,\$result,$userinput);
       return 1;
   }
   &register_handler("devalidatecache", \&server_devalidatecache_handler, 0, 1, 0);
   
 sub server_timezone_handler {  sub server_timezone_handler {
     my ($cmd,$tail,$client) = @_;      my ($cmd,$tail,$client) = @_;
     my $userinput = "$cmd:$tail";      my $userinput = "$cmd:$tail";
Line 1657  sub server_loncaparev_handler { Line 1871  sub server_loncaparev_handler {
 }  }
 &register_handler("serverloncaparev", \&server_loncaparev_handler, 0, 1, 0);  &register_handler("serverloncaparev", \&server_loncaparev_handler, 0, 1, 0);
   
   sub server_homeID_handler {
       my ($cmd,$tail,$client) = @_;
       my $userinput = "$cmd:$tail";
       &Reply($client,\$perlvar{'lonHostID'},$userinput);
       return 1;
   }
   &register_handler("serverhomeID", \&server_homeID_handler, 0, 1, 0);
   
   sub server_distarch_handler {
       my ($cmd,$tail,$client) = @_;
       my $userinput = "$cmd:$tail";
       my $reply = &distro_and_arch();
       &Reply($client,\$reply,$userinput);
       return 1;
   }
   &register_handler("serverdistarch", \&server_distarch_handler, 0, 1, 0);
   
 #   Process a reinit request.  Reinit requests that either  #   Process a reinit request.  Reinit requests that either
 #   lonc or lond be reinitialized so that an updated   #   lonc or lond be reinitialized so that an updated 
 #   host.tab or domain.tab can be processed.  #   host.tab or domain.tab can be processed.
Line 1778  sub authenticate_handler { Line 2009  sub authenticate_handler {
     if($pwdcorrect) {      if($pwdcorrect) {
         my $canhost = 1;          my $canhost = 1;
         unless ($clientcancheckhost) {          unless ($clientcancheckhost) {
             unless (grep(/^\Q$udom\E$/,@clientdoms)) {              my $uprimary_id = &Apache::lonnet::domain($udom,'primary');
               my $uint_dom = &Apache::lonnet::internet_dom($uprimary_id);
               my @intdoms;
               my $internet_names = &Apache::lonnet::get_internet_names($clientname);
               if (ref($internet_names) eq 'ARRAY') {
                   @intdoms = @{$internet_names};
               }
               unless ($uint_dom ne '' && grep(/^\Q$uint_dom\E$/,@intdoms)) {
                 my ($remote,$hosted);                  my ($remote,$hosted);
                 my $remotesession = &get_usersession_config($udom,'remotesession');                  my $remotesession = &get_usersession_config($udom,'remotesession');
                 if (ref($remotesession) eq 'HASH') {                  if (ref($remotesession) eq 'HASH') {
                     $remote = $remotesession->{'remote'}                      $remote = $remotesession->{'remote'};
                 }                  }
                 my $hostedsession = &get_usersession_config($clientdoms[0],'hostedsession');                  my $hostedsession = &get_usersession_config($clienthomedom,'hostedsession');
                 if (ref($hostedsession) eq 'HASH') {                  if (ref($hostedsession) eq 'HASH') {
                     $hosted = $hostedsession->{'hosted'};                      $hosted = $hostedsession->{'hosted'};
                 }                  }
                 $canhost = &Apache::lonnet::can_host_session($udom,$currentdomainid,$clientversion,                  my $loncaparev = $clientversion;
                   if ($loncaparev eq '') {
                       $loncaparev = $Apache::lonnet::loncaparevs{$clientname};
                   }
                   $canhost = &Apache::lonnet::can_host_session($udom,$clientname,
                                                                $loncaparev,
                                                              $remote,$hosted);                                                               $remote,$hosted);
             }              }
         }          }
Line 1864  sub change_password_handler { Line 2107  sub change_password_handler {
     }      }
     if($validated) {      if($validated) {
  my $realpasswd  = &get_auth_type($udom, $uname); # Defined since authd.   my $realpasswd  = &get_auth_type($udom, $uname); # Defined since authd.
   
  my ($howpwd,$contentpwd)=split(/:/,$realpasswd);   my ($howpwd,$contentpwd)=split(/:/,$realpasswd);
           my $notunique;
  if ($howpwd eq 'internal') {   if ($howpwd eq 'internal') {
     &Debug("internal auth");      &Debug("internal auth");
     my $salt=time;              my $ncpass = &hash_passwd($udom,$npass);
     $salt=substr($salt,6,2);              my (undef,$method,@rest) = split(/!/,$contentpwd);
     my $ncpass=crypt($npass,$salt);              if ($method eq 'bcrypt') {
     if(&rewrite_password_file($udom, $uname, "internal:$ncpass")) {                  my %passwdconf = &Apache::lonnet::get_passwdconf($udom);
                   if (($passwdconf{'numsaved'}) && ($passwdconf{'numsaved'} =~ /^\d+$/)) {
                       my @oldpasswds;
                       my $userpath = &propath($udom,$uname);
                       my $fullpath = $userpath.'/oldpasswds';
                       if (-d $userpath) {
                           my @oldfiles;
                           if (-e $fullpath) {
                               if (opendir(my $dir,$fullpath)) {
                                   (@oldfiles) = grep(/^\d+$/,readdir($dir));
                                   closedir($dir);
                               }
                               if (@oldfiles) {
                                   @oldfiles = sort { $b <=> $a } (@oldfiles);
                                   my $numremoved = 0;
                                   for (my $i=0; $i<@oldfiles; $i++) {
                                       if ($i>=$passwdconf{'numsaved'}) {
                                           if (-f "$fullpath/$oldfiles[$i]") {
                                               if (unlink("$fullpath/$oldfiles[$i]")) {
                                                   $numremoved ++;
                                               }
                                           }
                                       } elsif (open(my $fh,'<',"$fullpath/$oldfiles[$i]")) {
                                           while (my $line = <$fh>) {
                                               push(@oldpasswds,$line);
                                           }
                                           close($fh);
                                       }
                                   }
                                   if ($numremoved) {
                                       &logthis("unlinked $numremoved old password files for $uname:$udom");
                                   }
                               }
                           }
                           push(@oldpasswds,$contentpwd);
                           foreach my $item (@oldpasswds) {
                               my (undef,$method,@rest) = split(/!/,$item);
                               if ($method eq 'bcrypt') {
                                   my $result = &hash_passwd($udom,$npass,@rest);
                                   if ($result eq $item) {
                                       $notunique = 1;
                                       last;
                                   }
                               }
                           }
                           unless ($notunique) {
                               unless (-e $fullpath) {
                                   if (&mkpath("$fullpath/")) {
                                       chmod(0700,$fullpath);
                                   }
                               }
                               if (-d $fullpath) {
                                   my $now = time;
                                   if (open(my $fh,'>',"$fullpath/$now")) {
                                       print $fh $contentpwd;
                                       close($fh);
                                       chmod(0400,"$fullpath/$now");
                                   }
                               }
                           }
                       }
                   }
               }
               if ($notunique) {
                   my $msg="Result of password change for $uname:$udom - password matches one used before";
                   if ($lonhost) {
                       $msg .= " - request originated from: $lonhost";
                   }
                   &logthis($msg);
                   &Reply($client, "prioruse\n", $userinput);
       } elsif (&rewrite_password_file($udom, $uname, "internal:$ncpass")) {
  my $msg="Result of password change for $uname: pwchange_success";   my $msg="Result of password change for $uname: pwchange_success";
                 if ($lonhost) {                  if ($lonhost) {
                     $msg .= " - request originated from: $lonhost";                      $msg .= " - request originated from: $lonhost";
                 }                  }
                 &logthis($msg);                  &logthis($msg);
                   &update_passwd_history($uname,$udom,$howpwd,$context);
  &Reply($client, "ok\n", $userinput);   &Reply($client, "ok\n", $userinput);
     } else {      } else {
  &logthis("Unable to open $uname passwd "                  &logthis("Unable to open $uname passwd "               
Line 1885  sub change_password_handler { Line 2199  sub change_password_handler {
     }      }
  } elsif ($howpwd eq 'unix' && $context ne 'reset_by_email') {   } elsif ($howpwd eq 'unix' && $context ne 'reset_by_email') {
     my $result = &change_unix_password($uname, $npass);      my $result = &change_unix_password($uname, $npass);
               if ($result eq 'ok') {
                   &update_passwd_history($uname,$udom,$howpwd,$context);
               }
     &logthis("Result of password change for $uname: ".      &logthis("Result of password change for $uname: ".
      $result);       $result);
     &Reply($client, \$result, $userinput);      &Reply($client, \$result, $userinput);
Line 1895  sub change_password_handler { Line 2212  sub change_password_handler {
     #      #
     &Failure( $client, "auth_mode_error\n", $userinput);      &Failure( $client, "auth_mode_error\n", $userinput);
  }     }  
   
     } else {      } else {
  if ($failure eq '') {   if ($failure eq '') {
     $failure = 'non_authorized';      $failure = 'non_authorized';
Line 1907  sub change_password_handler { Line 2223  sub change_password_handler {
 }  }
 &register_handler("passwd", \&change_password_handler, 1, 1, 0);  &register_handler("passwd", \&change_password_handler, 1, 1, 0);
   
   sub hash_passwd {
       my ($domain,$plainpass,@rest) = @_;
       my ($salt,$cost);
       if (@rest) {
           $cost = $rest[0];
           # salt is first 22 characters, base-64 encoded by bcrypt
           my $plainsalt = substr($rest[1],0,22);
           $salt = Crypt::Eksblowfish::Bcrypt::de_base64($plainsalt);
       } else {
           my %domdefaults = &Apache::lonnet::get_domain_defaults($domain);
           my $defaultcost = $domdefaults{'intauth_cost'};
           if (($defaultcost eq '') || ($defaultcost =~ /D/)) {
               $cost = 10;
           } else {
               $cost = $defaultcost;
           }
           # Generate random 16-octet base64 salt
           $salt = "";
           $salt .= pack("C", int rand(256)) for 1..16;
       }
       my $hash = &Crypt::Eksblowfish::Bcrypt::bcrypt_hash({
           key_nul => 1,
           cost    => $cost,
           salt    => $salt,
       }, Digest::SHA::sha512(Encode::encode('UTF-8',$plainpass)));
   
       my $result = join("!", "", "bcrypt", sprintf("%02d",$cost),
                   &Crypt::Eksblowfish::Bcrypt::en_base64($salt).
                   &Crypt::Eksblowfish::Bcrypt::en_base64($hash));
       return $result;
   }
   
 #  #
 #   Create a new user.  User in this case means a lon-capa user.  #   Create a new user.  User in this case means a lon-capa user.
 #   The user must either already exist in some authentication realm  #   The user must either already exist in some authentication realm
Line 1950  sub add_user_handler { Line 2298  sub add_user_handler {
     ."makeuser";      ."makeuser";
     }      }
     unless ($fperror) {      unless ($fperror) {
  my $result=&make_passwd_file($uname, $umode,$npass, $passfilename);   my $result=&make_passwd_file($uname,$udom,$umode,$npass,
                                                $passfilename,'makeuser');
  &Reply($client,\$result, $userinput);     #BUGBUG - could be fail   &Reply($client,\$result, $userinput);     #BUGBUG - could be fail
     } else {      } else {
  &Failure($client, \$fperror, $userinput);   &Failure($client, \$fperror, $userinput);
Line 2011  sub change_authentication_handler { Line 2360  sub change_authentication_handler {
  my $passfilename = &password_path($udom, $uname);   my $passfilename = &password_path($udom, $uname);
  if ($passfilename) { # Not allowed to create a new user!!   if ($passfilename) { # Not allowed to create a new user!!
     # If just changing the unix passwd. need to arrange to run      # If just changing the unix passwd. need to arrange to run
     # passwd since otherwise make_passwd_file will run      # passwd since otherwise make_passwd_file will fail as 
     # lcuseradd which fails if an account already exists      # creation of unix authenticated users is no longer supported
     # (to prevent an unscrupulous LONCAPA admin from stealing              # except from the command line, when running make_domain_coordinator.pl
     # an existing account by overwriting it as a LonCAPA account).  
   
     if(($oldauth =~/^unix/) && ($umode eq "unix")) {      if(($oldauth =~/^unix/) && ($umode eq "unix")) {
  my $result = &change_unix_password($uname, $npass);   my $result = &change_unix_password($uname, $npass);
  &logthis("Result of password change for $uname: ".$result);   &logthis("Result of password change for $uname: ".$result);
  if ($result eq "ok") {   if ($result eq "ok") {
                       &update_passwd_history($uname,$udom,$umode,'changeuserauth');
     &Reply($client, \$result);      &Reply($client, \$result);
  } else {   } else {
     &Failure($client, \$result);      &Failure($client, \$result);
  }   }
     } else {      } else {
  my $result=&make_passwd_file($uname, $umode,$npass,$passfilename);   my $result=&make_passwd_file($uname,$udom,$umode,$npass,
                                                $passfilename,'changeuserauth');
  #   #
  #  If the current auth mode is internal, and the old auth mode was   #  If the current auth mode is internal, and the old auth mode was
  #  unix, or krb*,  and the user is an author for this domain,   #  unix, or krb*,  and the user is an author for this domain,
  #  re-run manage_permissions for that role in order to be able   #  re-run manage_permissions for that role in order to be able
  #  to take ownership of the construction space back to www:www   #  to take ownership of the construction space back to www:www
  #   #
   
   
  if( (($oldauth =~ /^unix/) && ($umode eq "internal")) ||  
     (($oldauth =~ /^internal/) && ($umode eq "unix")) ) {   
     if(&is_author($udom, $uname)) {  
  &Debug(" Need to manage author permissions...");  
  &manage_permissions("/$udom/_au", $udom, $uname, "$umode:");  
     }  
  }  
  &Reply($client, \$result, $userinput);   &Reply($client, \$result, $userinput);
     }      }
                 
Line 2053  sub change_authentication_handler { Line 2396  sub change_authentication_handler {
 }  }
 &register_handler("changeuserauth", \&change_authentication_handler, 1,1, 0);  &register_handler("changeuserauth", \&change_authentication_handler, 1,1, 0);
   
   sub update_passwd_history {
       my ($uname,$udom,$umode,$context) = @_;
       my $proname=&propath($udom,$uname);
       my $now = time;
       if (open(my $fh,">>$proname/passwd.log")) {
           print $fh "$now:$umode:$context\n";
           close($fh);
       }
       return;
   }
   
 #  #
 #   Determines if this is the home server for a user.  The home server  #   Determines if this is the home server for a user.  The home server
 #   for a user will have his/her lon-capa passwd file.  Therefore all we need  #   for a user will have his/her lon-capa passwd file.  Therefore all we need
Line 2134  sub update_resource_handler { Line 2488  sub update_resource_handler {
  my $transname="$fname.in.transfer";   my $transname="$fname.in.transfer";
  my $remoteurl=&Apache::lonnet::reply("sub:$fname","$clientname");   my $remoteurl=&Apache::lonnet::reply("sub:$fname","$clientname");
  my $response;   my $response;
  alarm(120);  # FIXME: cannot replicate files that take more than two minutes to transfer?
   # alarm(120);
   # FIXME: this should use the LWP mechanism, not internal alarms.
                   alarm(1200);
  {   {
     my $ua=new LWP::UserAgent;      my $ua=new LWP::UserAgent;
     my $request=new HTTP::Request('GET',"$remoteurl");      my $request=new HTTP::Request('GET',"$remoteurl");
Line 2142  sub update_resource_handler { Line 2499  sub update_resource_handler {
  }   }
  alarm(0);   alarm(0);
  if ($response->is_error()) {   if ($response->is_error()) {
     unlink($transname);                      my $reply=&Apache::lonnet::reply("unsub:$fname","$clientname");
                       &devalidate_meta_cache($fname);
                       if (-e $transname) {
                           unlink($transname);
                       }
                       unlink($fname);
     my $message=$response->status_line;      my $message=$response->status_line;
     &logthis("LWP GET: $message for $fname ($remoteurl)");      &logthis("LWP GET: $message for $fname ($remoteurl)");
  } else {   } else {
     if ($remoteurl!~/\.meta$/) {      if ($remoteurl!~/\.meta$/) {
   # FIXME: isn't there an internal LWP mechanism for this?
  alarm(120);   alarm(120);
  {   {
     my $ua=new LWP::UserAgent;      my $ua=new LWP::UserAgent;
Line 2220  sub fetch_user_file_handler { Line 2583  sub fetch_user_file_handler {
   
  my $destname=$udir.'/'.$ufile;   my $destname=$udir.'/'.$ufile;
  my $transname=$udir.'/'.$ufile.'.in.transit';   my $transname=$udir.'/'.$ufile.'.in.transit';
  my $remoteurl='http://'.$clientip.'/userfiles/'.$fname;          my $clientprotocol=$Apache::lonnet::protocol{$clientname};
           $clientprotocol = 'http' if ($clientprotocol ne 'https');
    my $clienthost = &Apache::lonnet::hostname($clientname);
    my $remoteurl=$clientprotocol.'://'.$clienthost.'/userfiles/'.$fname;
  my $response;   my $response;
  Debug("Remote URL : $remoteurl Transfername $transname Destname: $destname");   Debug("Remote URL : $remoteurl Transfername $transname Destname: $destname");
  alarm(120);   alarm(120);
Line 2242  sub fetch_user_file_handler { Line 2608  sub fetch_user_file_handler {
  unlink($transname);   unlink($transname);
  &Failure($client, "failed\n", $userinput);   &Failure($client, "failed\n", $userinput);
     } else {      } else {
                   if ($fname =~ /^default.+\.(page|sequence)$/) {
                       my ($major,$minor) = split(/\./,$clientversion);
                       if (($major < 2) || ($major == 2 && $minor < 11)) {
                           my $now = time;
                           &Apache::lonnet::do_cache_new('crschange',$udom.'_'.$uname,$now,600);
                           my $key = &escape('internal.contentchange');
                           my $what = "$key=$now";
                           my $hashref = &tie_user_hash($udom,$uname,'environment',
                                                        &GDBM_WRCREAT(),"P",$what);
                           if ($hashref) {
                               $hashref->{$key}=$now;
                               if (!&untie_user_hash($hashref)) {
                                   &logthis("error: ".($!+0)." untie (GDBM) failed ".
                                            "when updating internal.contentchange");
                               }
                           }
                       }
                   }
  &Reply($client, "ok\n", $userinput);   &Reply($client, "ok\n", $userinput);
     }      }
  }      }   
Line 2278  sub remove_user_file_handler { Line 2662  sub remove_user_file_handler {
     if (-e $file) {      if (-e $file) {
  #   #
  #   If the file is a regular file unlink is fine...   #   If the file is a regular file unlink is fine...
  #   However it's possible the client wants a dir.   #   However it's possible the client wants a dir
  #   removed, in which case rmdir is more approprate:   #   removed, in which case rmdir is more appropriate
           #   Note: rmdir will only remove an empty directory.
  #   #
         if (-f $file){          if (-f $file){
     unlink($file);      unlink($file);
                       # for html files remove the associated .bak file
                       # which may have been created by the editor.
                       if ($ufile =~ m{^((docs|supplemental)/(?:\d+|default)/\d+(?:|/.+)/)[^/]+\.x?html?$}i) {
                           my $path = $1;
                           if (-e $file.'.bak') {
                               unlink($file.'.bak');
                           }
                       }
  } elsif(-d $file) {   } elsif(-d $file) {
     rmdir($file);      rmdir($file);
  }   }
Line 2396  sub user_has_session_handler { Line 2789  sub user_has_session_handler {
   
     my ($udom, $uname) = map { &unescape($_) } (split(/:/, $tail));      my ($udom, $uname) = map { &unescape($_) } (split(/:/, $tail));
           
     &logthis("Looking for $udom $uname");  
     opendir(DIR,$perlvar{'lonIDsDir'});      opendir(DIR,$perlvar{'lonIDsDir'});
     my $filename;      my $filename;
     while ($filename=readdir(DIR)) {      while ($filename=readdir(DIR)) {
Line 2646  sub newput_user_profile_entry { Line 3038  sub newput_user_profile_entry {
     foreach my $pair (@pairs) {      foreach my $pair (@pairs) {
  my ($key,$value)=split(/=/,$pair);   my ($key,$value)=split(/=/,$pair);
  if (exists($hashref->{$key})) {   if (exists($hashref->{$key})) {
               if (!&untie_user_hash($hashref)) {
                   &logthis("error: ".($!+0)." untie (GDBM) failed ".
                            "while attempting newput - early out as key exists");
               }
     &Failure($client, "key_exists: ".$key."\n",$userinput);      &Failure($client, "key_exists: ".$key."\n",$userinput);
     return 1;      return 1;
  }   }
Line 2897  sub get_profile_entry { Line 3293  sub get_profile_entry {
 #  #
 #  Parameters:  #  Parameters:
 #     $cmd               - Command keyword of request (eget).  #     $cmd               - Command keyword of request (eget).
 #     $tail              - Tail of the command.  See GetProfileEntry #                          for more information about this.  #     $tail              - Tail of the command.  See GetProfileEntry
   #                          for more information about this.
 #     $client            - File open on the client.  #     $client            - File open on the client.
 #  Returns:  #  Returns:
 #     1      - Continue processing  #     1      - Continue processing
Line 3115  sub dump_profile_database { Line 3512  sub dump_profile_database {
 #                                             that is matched against  #                                             that is matched against
 #                                             database keywords to do  #                                             database keywords to do
 #                                             selective dumps.  #                                             selective dumps.
   #                               range       - optional range of entries
   #                                             e.g., 10-20 would return the
   #                                             10th to 19th items, etc.  
 #   $client                   - Channel open on the client.  #   $client                   - Channel open on the client.
 # Returns:  # Returns:
 #    1    - Continue processing.  #    1    - Continue processing.
Line 3124  sub dump_profile_database { Line 3524  sub dump_profile_database {
 sub dump_with_regexp {  sub dump_with_regexp {
     my ($cmd, $tail, $client) = @_;      my ($cmd, $tail, $client) = @_;
   
       my $res = LONCAPA::Lond::dump_with_regexp($tail, $clientversion);
   
     my $userinput = "$cmd:$tail";      if ($res =~ /^error:/) {
           &Failure($client, \$res, "$cmd:$tail");
     my ($udom,$uname,$namespace,$regexp,$range)=split(/:/,$tail);  
     if (defined($regexp)) {  
  $regexp=&unescape($regexp);  
     } else {  
  $regexp='.';  
     }  
     my ($start,$end);  
     if (defined($range)) {  
  if ($range =~/^(\d+)\-(\d+)$/) {  
     ($start,$end) = ($1,$2);  
  } elsif ($range =~/^(\d+)$/) {  
     ($start,$end) = (0,$1);  
  } else {  
     undef($range);  
  }  
     }  
     my $hashref = &tie_user_hash($udom, $uname, $namespace,  
  &GDBM_READER());  
     if ($hashref) {  
         my $qresult='';  
  my $count=0;  
  while (my ($key,$value) = each(%$hashref)) {  
             if ($namespace eq 'roles') {  
                 if ($key =~ m{^/($LONCAPA::match_domain)/($LONCAPA::match_community)_(cc|co|in|ta|ep|ad|st|cr)}) {  
                     my $cdom = $1;  
                     my $cnum = $2;  
                     if ($clientversion =~ /^\'?(\d+)\.(\d+)/) {  
                         my $major = $1;  
                         my $minor = $2;  
                         next if (($major < 2) || (($major == 2) && ($minor < 9)));  
                     } else {  
                         my $homeserver = &Apache::lonnet::homeserver($cnum,$cdom);  
                         next unless ($currenthostid eq $homeserver);  
                     }  
                 }  
             }  
     if ($regexp eq '.') {  
  $count++;  
  if (defined($range) && $count >= $end)   { last; }  
  if (defined($range) && $count <  $start) { next; }  
  $qresult.=$key.'='.$value.'&';  
     } else {  
  my $unescapeKey = &unescape($key);  
  if (eval('$unescapeKey=~/$regexp/')) {  
     $count++;  
     if (defined($range) && $count >= $end)   { last; }  
     if (defined($range) && $count <  $start) { next; }  
     $qresult.="$key=$value&";  
  }  
     }  
  }  
  if (&untie_user_hash($hashref)) {  
     chop($qresult);  
     &Reply($client, \$qresult, $userinput);  
  } else {  
     &Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ".  
      "while attempting dump\n", $userinput);  
  }  
     } else {      } else {
  &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".          &Reply($client, \$res, "$cmd:$tail");
  "while attempting dump\n", $userinput);  
     }      }
   
     return 1;      return 1;
Line 3204  sub dump_with_regexp { Line 3546  sub dump_with_regexp {
 #                          namespace   - Name of the database being modified  #                          namespace   - Name of the database being modified
 #                          rid         - Resource keyword to modify.  #                          rid         - Resource keyword to modify.
 #                          what        - new value associated with rid.  #                          what        - new value associated with rid.
   #                          laststore   - (optional) version=timestamp
   #                                        for most recent transaction for rid
   #                                        in namespace, when cstore was called
 #  #
 #    $client             - Socket open on the client.  #    $client             - Socket open on the client.
 #  #
Line 3212  sub dump_with_regexp { Line 3557  sub dump_with_regexp {
 #      1 (keep on processing).  #      1 (keep on processing).
 #  Side-Effects:  #  Side-Effects:
 #    Writes to the client  #    Writes to the client
   #    Successful storage will cause either 'ok', or, if $laststore was included
   #    in the tail of the request, and the version number for the last transaction
   #    is larger than the version in $laststore, delay:$numtrans , where $numtrans
   #    is the number of store evevnts recorded for rid in namespace since
   #    lonnet::store() was called by the client.
   #
 sub store_handler {  sub store_handler {
     my ($cmd, $tail, $client) = @_;      my ($cmd, $tail, $client) = @_;
     
     my $userinput = "$cmd:$tail";      my $userinput = "$cmd:$tail";
   
     my ($udom,$uname,$namespace,$rid,$what) =split(/:/,$tail);      chomp($tail);
       my ($udom,$uname,$namespace,$rid,$what,$laststore) =split(/:/,$tail);
     if ($namespace ne 'roles') {      if ($namespace ne 'roles') {
   
  chomp($what);  
  my @pairs=split(/\&/,$what);   my @pairs=split(/\&/,$what);
  my $hashref  = &tie_user_hash($udom, $uname, $namespace,   my $hashref  = &tie_user_hash($udom, $uname, $namespace,
        &GDBM_WRCREAT(), "S",         &GDBM_WRCREAT(), "S",
        "$rid:$what");         "$rid:$what");
  if ($hashref) {   if ($hashref) {
     my $now = time;      my $now = time;
     my @previouskeys=split(/&/,$hashref->{"keys:$rid"});              my $numtrans;
     my $key;              if ($laststore) {
                   my ($previousversion,$previoustime) = split(/\=/,$laststore);
                   my ($lastversion,$lasttime) = (0,0);
                   $lastversion = $hashref->{"version:$rid"};
                   if ($lastversion) {
                       $lasttime = $hashref->{"$lastversion:$rid:timestamp"};
                   }
                   if (($previousversion) && ($previousversion !~ /\D/)) {
                       if (($lastversion > $previousversion) && ($lasttime >= $previoustime)) {
                           $numtrans = $lastversion - $previousversion;
                       }
                   } elsif ($lastversion) {
                       $numtrans = $lastversion;
                   }
                   if ($numtrans) {
                       $numtrans =~ s/D//g;
                   }
               }
   
     $hashref->{"version:$rid"}++;      $hashref->{"version:$rid"}++;
     my $version=$hashref->{"version:$rid"};      my $version=$hashref->{"version:$rid"};
     my $allkeys='';       my $allkeys=''; 
Line 3241  sub store_handler { Line 3610  sub store_handler {
     $allkeys.='timestamp';      $allkeys.='timestamp';
     $hashref->{"$version:keys:$rid"}=$allkeys;      $hashref->{"$version:keys:$rid"}=$allkeys;
     if (&untie_user_hash($hashref)) {      if (&untie_user_hash($hashref)) {
  &Reply($client, "ok\n", $userinput);                  my $msg = 'ok';
                   if ($numtrans) {
                       $msg = 'delay:'.$numtrans;
                   }
                   &Reply($client, "$msg\n", $userinput);
     } else {      } else {
  &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".   &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
  "while attempting store\n", $userinput);   "while attempting store\n", $userinput);
Line 3503  sub send_query_handler { Line 3876  sub send_query_handler {
   
     my ($query,$arg1,$arg2,$arg3)=split(/\:/,$tail);      my ($query,$arg1,$arg2,$arg3)=split(/\:/,$tail);
     $query=~s/\n*$//g;      $query=~s/\n*$//g;
       if (($query eq 'usersearch') || ($query eq 'instdirsearch')) {
           my $usersearchconf = &get_usersearch_config($currentdomainid,'directorysrch');
           my $earlyout;
           if (ref($usersearchconf) eq 'HASH') {
               if ($currentdomainid eq $clienthomedom) {
                   if ($query eq 'usersearch') {
                       if ($usersearchconf->{'lcavailable'} eq '0') {
                           $earlyout = 1;
                       }
                   } else {
                       if ($usersearchconf->{'available'} eq '0') {
                           $earlyout = 1;
                       }
                   }
               } else {
                   if ($query eq 'usersearch') {
                       if ($usersearchconf->{'lclocalonly'}) {
                           $earlyout = 1;
                       }
                   } else {
                       if ($usersearchconf->{'localonly'}) {
                           $earlyout = 1;
                       }
                   }
               }
           }
           if ($earlyout) {
               &Reply($client, "query_not_authorized\n");
               return 1;
           }
       }
     &Reply($client, "". &sql_reply("$clientname\&$query".      &Reply($client, "". &sql_reply("$clientname\&$query".
  "\&$arg1"."\&$arg2"."\&$arg3")."\n",   "\&$arg1"."\&$arg2"."\&$arg3")."\n",
   $userinput);    $userinput);
Line 3757  sub put_course_id_hash_handler { Line 4161  sub put_course_id_hash_handler {
 #                 creationcontext - include courses created in specified context   #                 creationcontext - include courses created in specified context 
 #  #
 #                 domcloner - flag to indicate if user can create CCs in course's domain.  #                 domcloner - flag to indicate if user can create CCs in course's domain.
 #                             If so, ability to clone course is automatic.   #                             If so, ability to clone course is automatic.
   #                 hasuniquecode - filter by courses for which a six character unique code has
   #                                 been set.
 #  #
 #     $client  - The socket open on the client.  #     $client  - The socket open on the client.
 # Returns:  # Returns:
Line 3771  sub dump_course_id_handler { Line 4177  sub dump_course_id_handler {
     my ($udom,$since,$description,$instcodefilter,$ownerfilter,$coursefilter,      my ($udom,$since,$description,$instcodefilter,$ownerfilter,$coursefilter,
         $typefilter,$regexp_ok,$rtn_as_hash,$selfenrollonly,$catfilter,$showhidden,          $typefilter,$regexp_ok,$rtn_as_hash,$selfenrollonly,$catfilter,$showhidden,
         $caller,$cloner,$cc_clone_list,$cloneonly,$createdbefore,$createdafter,          $caller,$cloner,$cc_clone_list,$cloneonly,$createdbefore,$createdafter,
         $creationcontext,$domcloner) =split(/:/,$tail);          $creationcontext,$domcloner,$hasuniquecode) =split(/:/,$tail);
     my $now = time;      my $now = time;
     my ($cloneruname,$clonerudom,%cc_clone);      my ($cloneruname,$clonerudom,%cc_clone);
     if (defined($description)) {      if (defined($description)) {
Line 3844  sub dump_course_id_handler { Line 4250  sub dump_course_id_handler {
     } else {      } else {
         $creationcontext = '.';          $creationcontext = '.';
     }      }
       unless ($hasuniquecode) {
           $hasuniquecode = '.';
       }
     my $unpack = 1;      my $unpack = 1;
     if ($description eq '.' && $instcodefilter eq '.' && $coursefilter eq '.' &&       if ($description eq '.' && $instcodefilter eq '.' && $ownerfilter eq '.' && 
         $typefilter eq '.') {          $typefilter eq '.') {
         $unpack = 0;          $unpack = 0;
     }      }
Line 3932  sub dump_course_id_handler { Line 4341  sub dump_course_id_handler {
                 $selfenroll_end = $items->{'selfenroll_end_date'};                  $selfenroll_end = $items->{'selfenroll_end_date'};
                 $created = $items->{'created'};                  $created = $items->{'created'};
                 $context = $items->{'context'};                  $context = $items->{'context'};
                   if ($hasuniquecode ne '.') {
                       next unless ($items->{'uniquecode'});
                   }
                 if ($selfenrollonly) {                  if ($selfenrollonly) {
                     next if (!$selfenroll_types);                      next if (!$selfenroll_types);
                     if (($selfenroll_end > 0) && ($selfenroll_end <= $now)) {                      if (($selfenroll_end > 0) && ($selfenroll_end <= $now)) {
Line 4164  sub course_lastaccess_handler { Line 4576  sub course_lastaccess_handler {
 }  }
 &register_handler("courselastaccess",\&course_lastaccess_handler, 0, 1, 0);  &register_handler("courselastaccess",\&course_lastaccess_handler, 0, 1, 0);
   
   sub course_sessions_handler {
       my ($cmd, $tail, $client) = @_;
       my $userinput = "$cmd:$tail";
       my ($cdom,$cnum,$lastactivity) = split(':',$tail);
       my $dbsuffix = '_'.$cdom.'_'.$cnum.'.db';
       my (%sessions,$qresult);
       my $now=time;
       if (opendir(DIR,$perlvar{'lonIDsDir'})) {
           my $filename;
           while ($filename=readdir(DIR)) {
               next if ($filename=~/^\./);
               next if ($filename=~/^publicuser_/);
               next if ($filename=~/^[a-f0-9]+_(linked|lti_\d+)\.id$/);
               if ($filename =~ /^($LONCAPA::match_username)_\d+_($LONCAPA::match_domain)_/) {
                   my ($uname,$udom) = ($1,$2);
                   next unless (-e "$perlvar{'lonDaemons'}/tmp/$uname$dbsuffix");
                   my $mtime = (stat("$perlvar{'lonIDsDir'}/$filename"))[9];
                   if ($lastactivity < 0) {
                       next if ($mtime-$now > $lastactivity);
                   } else {
                       next if ($now-$mtime > $lastactivity);
                   }
                   $sessions{$uname.':'.$udom} = $mtime;
               }
           }
           closedir(DIR);
       }
       foreach my $user (keys(%sessions)) {
           $qresult.=&escape($user).'='.$sessions{$user}.'&';
       }
       if ($qresult) {
           chop($qresult);
       }
       &Reply($client, \$qresult, $userinput);
       return 1;
   }
   &register_handler("coursesessions",\&course_sessions_handler, 0, 1, 0);
   
 #  #
 # Puts an unencrypted entry in a namespace db file at the domain level   # Puts an unencrypted entry in a namespace db file at the domain level 
 #  #
Line 4212  sub put_domain_handler { Line 4662  sub put_domain_handler {
 # domain directory.  # domain directory.
 #  #
 # Parameters:  # Parameters:
 #   $cmd             - Command request keyword (get).  #   $cmd             - Command request keyword (getdom).
 #   $tail            - Tail of the command.  This is a colon separated list  #   $tail            - Tail of the command.  This is a colon separated list
 #                      consisting of the domain and the 'namespace'   #                      consisting of the domain and the 'namespace' 
 #                      which selects the gdbm file to do the lookup in,  #                      which selects the gdbm file to do the lookup in,
Line 4229  sub put_domain_handler { Line 4679  sub put_domain_handler {
 sub get_domain_handler {  sub get_domain_handler {
     my ($cmd, $tail, $client) = @_;      my ($cmd, $tail, $client) = @_;
   
     my $userinput = "$client:$tail";      my $userinput = "$cmd:$tail";
   
     my ($udom,$namespace,$what)=split(/:/,$tail,3);      my ($udom,$namespace,$what)=split(/:/,$tail,3);
     chomp($what);      my $res = LONCAPA::Lond::get_dom($userinput);
     my @queries=split(/\&/,$what);      if ($res =~ /^error:/) {
     my $qresult='';          &Failure($client, \$res, $userinput);
     my $hashref = &tie_domain_hash($udom, "$namespace", &GDBM_READER());  
     if ($hashref) {  
         for (my $i=0;$i<=$#queries;$i++) {  
             $qresult.="$hashref->{$queries[$i]}&";  
         }  
         if (&untie_domain_hash($hashref)) {  
             $qresult=~s/\&$//;  
             &Reply($client, \$qresult, $userinput);  
         } else {  
             &Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ".  
                       "while attempting getdom\n",$userinput);  
         }  
     } else {      } else {
         &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".          &Reply($client, \$res, $userinput);
                  "while attempting getdom\n",$userinput);  
     }      }
   
     return 1;      return 1;
Line 4353  sub get_id_handler { Line 4790  sub get_id_handler {
 }  }
 &register_handler("idget", \&get_id_handler, 0, 1, 0);  &register_handler("idget", \&get_id_handler, 0, 1, 0);
   
   #   Deletes one or more ids in a domain's id database.
   #
   #   Parameters:
   #       $cmd                  - Command keyword (iddel).
   #       $tail                 - Command tail.  In this case a colon
   #                               separated list containing:
   #                               The domain for which we are deleting the id(s).
   #                               &-separated list of id(s) to delete.
   #       $client               - File open on client socket.
   # Returns:
   #     1   - Continue processing
   #     0   - Exit server.
   #
   #
   
   sub del_id_handler {
       my ($cmd,$tail,$client) = @_;
   
       my $userinput = "$cmd:$tail";
   
       my ($udom,$what)=split(/:/,$tail);
       chomp($what);
       my $hashref = &tie_domain_hash($udom, "ids", &GDBM_WRCREAT(),
                                      "D", $what);
       if ($hashref) {
           my @keys=split(/\&/,$what);
           foreach my $key (@keys) {
               delete($hashref->{$key});
           }
           if (&untie_user_hash($hashref)) {
               &Reply($client, "ok\n", $userinput);
           } else {
               &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
                       "while attempting iddel\n", $userinput);
           }
       } else {
           &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
                    "while attempting iddel\n", $userinput);
       }
       return 1;
   }
   &register_handler("iddel", \&del_id_handler, 0, 1, 0);
   
 #  #
 # Puts broadcast e-mail sent by Domain Coordinator in nohist_dcmail database   # Puts broadcast e-mail sent by Domain Coordinator in nohist_dcmail database 
 #  #
Line 4373  sub get_id_handler { Line 4853  sub get_id_handler {
 sub put_dcmail_handler {  sub put_dcmail_handler {
     my ($cmd,$tail,$client) = @_;      my ($cmd,$tail,$client) = @_;
     my $userinput = "$cmd:$tail";      my $userinput = "$cmd:$tail";
                                                                                   
   
     my ($udom,$what)=split(/:/,$tail);      my ($udom,$what)=split(/:/,$tail);
     chomp($what);      chomp($what);
     my $hashref = &tie_domain_hash($udom, "nohist_dcmail", &GDBM_WRCREAT());      my $hashref = &tie_domain_hash($udom, "nohist_dcmail", &GDBM_WRCREAT());
Line 4637  sub tmp_put_handler { Line 5118  sub tmp_put_handler {
     }      }
     my ($id,$store);      my ($id,$store);
     $tmpsnum++;      $tmpsnum++;
     if ($context eq 'resetpw') {      if (($context eq 'resetpw') || ($context eq 'createaccount')) {
         $id = &md5_hex(&md5_hex(time.{}.rand().$$));          $id = &md5_hex(&md5_hex(time.{}.rand().$$));
     } else {      } else {
         $id = $$.'_'.$clientip.'_'.$tmpsnum;          $id = $$.'_'.$clientip.'_'.$tmpsnum;
Line 4728  sub tmp_del_handler { Line 5209  sub tmp_del_handler {
 &register_handler("tmpdel", \&tmp_del_handler, 0, 1, 0);  &register_handler("tmpdel", \&tmp_del_handler, 0, 1, 0);
   
 #  #
   #  Process the updatebalcookie command.  This command updates a
   #  cookie in the lonBalancedir directory on a load balancer node.
   #
   # Parameters:
   #   $cmd      - Command that got us here.
   #   $tail     - Tail of the request (escaped cookie: escaped current entry)
   #
   #   $client   - socket open on the client process.
   #
   # Returns:
   #   1     - Indicating processing should continue.
   # Side Effects:
   #   A cookie file is updated from the lonBalancedir directory
   #   A reply is sent to the client.
   #
   sub update_balcookie_handler {
       my ($cmd, $tail, $client) = @_;
   
       my $userinput= "$cmd:$tail";
       chomp($tail);
       my ($cookie,$lastentry) = map { &unescape($_) } (split(/:/,$tail));
   
       my $updatedone;
       if ($cookie =~ /^$LONCAPA::match_domain\_$LONCAPA::match_username\_[a-f0-9]{32}$/) {
           my $execdir=$perlvar{'lonBalanceDir'};
           if (-e "$execdir/$cookie.id") {
               my $doupdate;
               if (open(my $fh,'<',"$execdir/$cookie.id")) {
                   while (my $line = <$fh>) {
                       chomp($line);
                       if ($line eq $lastentry) {
                           $doupdate = 1;
                           last;
                       }
                   }
                   close($fh);
               }
               if ($doupdate) {
                   if (open(my $fh,'>',"$execdir/$cookie.id")) {
                       print $fh $clientname;
                       close($fh);
                       $updatedone = 1;
                   }
               }
           }
       }
       if ($updatedone) {
           &Reply($client, "ok\n", $userinput);
       } else {
           &Failure( $client, "error: ".($!+0)."file update failed ".
                     "while attempting updatebalcookie\n", $userinput);
       }
       return 1;
   }
   &register_handler("updatebalcookie", \&update_balcookie_handler, 0, 1, 0);
   
   #
   #  Process the delbalcookie command. This command deletes a balancer
   #  cookie in the lonBalancedir directory on a load balancer node.
   #
   # Parameters:
   #   $cmd      - Command that got us here.
   #   $cookie   - Cookie to be deleted.
   #   $client   - socket open on the client process.
   #
   # Returns:
   #   1     - Indicating processing should continue.
   # Side Effects:
   #   A cookie file is deleted from the lonBalancedir directory
   #   A reply is sent to the client.
   sub del_balcookie_handler {
       my ($cmd, $cookie, $client) = @_;
   
       my $userinput= "$cmd:$cookie";
   
       chomp($cookie);
       $cookie = &unescape($cookie);
       my $deleted = '';
       if ($cookie =~ /^$LONCAPA::match_domain\_$LONCAPA::match_username\_[a-f0-9]{32}$/) {
           my $execdir=$perlvar{'lonBalanceDir'};
           if (-e "$execdir/$cookie.id") {
               if (open(my $fh,'<',"$execdir/$cookie.id")) {
                   my $dodelete;
                   while (my $line = <$fh>) {
                       chomp($line);
                       if ($line eq $clientname) {
                           $dodelete = 1;
                           last;
                       }
                   }
                   close($fh);
                   if ($dodelete) {
                       if (unlink("$execdir/$cookie.id")) {
                           $deleted = 1;
                       }
                   }
               }
           }
       }
       if ($deleted) {
           &Reply($client, "ok\n", $userinput);
       } else {
           &Failure( $client, "error: ".($!+0)."Unlinking cookie file Failed ".
                     "while attempting delbalcookie\n", $userinput);
       }
       return 1;
   }
   &register_handler("delbalcookie", \&del_balcookie_handler, 0, 1, 0);
   
   #
 #   Processes the setannounce command.  This command  #   Processes the setannounce command.  This command
 #   creates a file named announce.txt in the top directory of  #   creates a file named announce.txt in the top directory of
 #   the documentn root and sets its contents.  The announce.txt file is  #   the documentn root and sets its contents.  The announce.txt file is
Line 4900  sub validate_instcode_handler { Line 5491  sub validate_instcode_handler {
     my ($dom,$instcode,$owner) = split(/:/, $tail);      my ($dom,$instcode,$owner) = split(/:/, $tail);
     $instcode = &unescape($instcode);      $instcode = &unescape($instcode);
     $owner = &unescape($owner);      $owner = &unescape($owner);
     my ($outcome,$description) =       my ($outcome,$description,$credits) = 
         &localenroll::validate_instcode($dom,$instcode,$owner);          &localenroll::validate_instcode($dom,$instcode,$owner);
     my $result = &escape($outcome).'&'.&escape($description);      my $result = &escape($outcome).'&'.&escape($description).'&'.
                    &escape($credits);
     &Reply($client, \$result, $userinput);      &Reply($client, \$result, $userinput);
   
     return 1;      return 1;
Line 4955  sub get_sections_handler { Line 5547  sub get_sections_handler {
 sub validate_course_owner_handler {  sub validate_course_owner_handler {
     my ($cmd, $tail, $client)  = @_;      my ($cmd, $tail, $client)  = @_;
     my $userinput = "$cmd:$tail";      my $userinput = "$cmd:$tail";
     my ($inst_course_id, $owner, $cdom) = split(/:/, $tail);      my ($inst_course_id, $owner, $cdom, $coowners) = split(/:/, $tail);
       
     $owner = &unescape($owner);      $owner = &unescape($owner);
     my $outcome = &localenroll::new_course($inst_course_id,$owner,$cdom);      $coowners = &unescape($coowners);
       my $outcome = &localenroll::new_course($inst_course_id,$owner,$cdom,$coowners);
     &Reply($client, \$outcome, $userinput);      &Reply($client, \$outcome, $userinput);
   
   
Line 5004  sub validate_course_section_handler { Line 5597  sub validate_course_section_handler {
 # Formal Parameters:  # Formal Parameters:
 #    $cmd     - The command request that got us dispatched.  #    $cmd     - The command request that got us dispatched.
 #    $tail    - The tail of the command.   In this case this is a colon separated  #    $tail    - The tail of the command.   In this case this is a colon separated
 #               set of words that will be split into:  #               set of values that will be split into:
 #               $inst_class  - Institutional code for the specific class section     #               $inst_class  - Institutional code for the specific class section   
 #               $courseowner - The escaped username:domain of the course owner   #               $ownerlist   - An escaped comma-separated list of username:domain
   #                              of the course owner, and co-owner(s).
 #               $cdom        - The domain of the course from the institution's  #               $cdom        - The domain of the course from the institution's
 #                              point of view.  #                              point of view.
 #    $client  - The socket open on the client.  #    $client  - The socket open on the client.
Line 5031  sub validate_class_access_handler { Line 5625  sub validate_class_access_handler {
 &register_handler("autovalidateclass_sec", \&validate_class_access_handler, 0, 1, 0);  &register_handler("autovalidateclass_sec", \&validate_class_access_handler, 0, 1, 0);
   
 #  #
   #   Validate course owner or co-owners(s) access to enrollment data for all sections
   #   and crosslistings for a particular course.
   #
   #
   # Formal Parameters:
   #    $cmd     - The command request that got us dispatched.
   #    $tail    - The tail of the command.   In this case this is a colon separated
   #               set of values that will be split into:
   #               $ownerlist   - An escaped comma-separated list of username:domain
   #                              of the course owner, and co-owner(s).
   #               $cdom        - The domain of the course from the institution's
   #                              point of view.
   #               $classes     - Frozen hash of institutional course sections and
   #                              crosslistings.
   #    $client  - The socket open on the client.
   # Returns:
   #    1 - continue processing.
   #
   
   sub validate_classes_handler {
       my ($cmd, $tail, $client) = @_;
       my $userinput = "$cmd:$tail";
       my ($ownerlist,$cdom,$classes) = split(/:/, $tail);
       my $classesref = &Apache::lonnet::thaw_unescape($classes);
       my $owners = &unescape($ownerlist);
       my $result;
       eval {
           local($SIG{__DIE__})='DEFAULT';
           my %validations;
           my $response = &localenroll::check_instclasses($owners,$cdom,$classesref,
                                                          \%validations);
           if ($response eq 'ok') {
               foreach my $key (keys(%validations)) {
                   $result .= &escape($key).'='.&Apache::lonnet::freeze_escape($validations{$key}).'&';
               }
               $result =~ s/\&$//;
           } else {
               $result = 'error';
           }
       };
       if (!$@) {
           &Reply($client, \$result, $userinput);
       } else {
           &Failure($client,"unknown_cmd\n",$userinput);
       }
       return 1;
   }
   &register_handler("autovalidateinstclasses", \&validate_classes_handler, 0, 1, 0);
   
   #
 #   Create a password for a new LON-CAPA user added by auto-enrollment.  #   Create a password for a new LON-CAPA user added by auto-enrollment.
 #   Only used for case where authentication method for new user is localauth  #   Only used for case where authentication method for new user is localauth
 #  #
Line 5065  sub create_auto_enroll_password_handler Line 5709  sub create_auto_enroll_password_handler
 &register_handler("autocreatepassword", \&create_auto_enroll_password_handler,   &register_handler("autocreatepassword", \&create_auto_enroll_password_handler, 
   0, 1, 0);    0, 1, 0);
   
   sub auto_export_grades_handler {
       my ($cmd, $tail, $client) = @_;
       my $userinput = "$cmd:$tail";
       my ($cdom,$cnum,$info,$data) = split(/:/,$tail);
       my $inforef = &Apache::lonnet::thaw_unescape($info);
       my $dataref = &Apache::lonnet::thaw_unescape($data);
       my ($outcome,$result);;
       eval {
           local($SIG{__DIE__})='DEFAULT';
           my %rtnhash;
           $outcome=&localenroll::export_grades($cdom,$cnum,$inforef,$dataref,\%rtnhash);
           if ($outcome eq 'ok') {
               foreach my $key (keys(%rtnhash)) {
                   $result .= &escape($key).'='.&Apache::lonnet::freeze_escape($rtnhash{$key}).'&';
               }
               $result =~ s/\&$//;
           }
       };
       if (!$@) {
           if ($outcome eq 'ok') {
               if ($cipher) {
                   my $cmdlength=length($result);
                   $result.="         ";
                   my $encresult='';
                   for (my $encidx=0;$encidx<=$cmdlength;$encidx+=8) {
                       $encresult.= unpack("H16",
                                           $cipher->encrypt(substr($result,
                                                                   $encidx,
                                                                   8)));
                   }
                   &Reply( $client, "enc:$cmdlength:$encresult\n", $userinput);
               } else {
                   &Failure( $client, "error:no_key\n", $userinput);
               }
           } else {
               &Reply($client, "$outcome\n", $userinput);
           }
       } else {
           &Failure($client,"export_error\n",$userinput);
       }
       return 1;
   }
   &register_handler("autoexportgrades", \&auto_export_grades_handler,
                     1, 1, 0);
   
   
 #   Retrieve and remove temporary files created by/during autoenrollment.  #   Retrieve and remove temporary files created by/during autoenrollment.
 #  #
 # Formal Parameters:  # Formal Parameters:
 #    $cmd      - The command that got us dispatched.  #    $cmd      - The command that got us dispatched.
 #    $tail     - The tail of the command.  In our case this is a colon   #    $tail     - The tail of the command.  In our case this is a colon 
 #                separated list that will be split into:  #                separated list that will be split into:
 #                $filename - The name of the file to remove.  #                $filename - The name of the file to retrieve.
 #                            The filename is given as a path relative to  #                            The filename is given as a path relative to
 #                            the LonCAPA temp file directory.  #                            the LonCAPA temp file directory.
 #    $client   - Socket open on the client.  #    $client   - Socket open on the client.
Line 5085  sub retrieve_auto_file_handler { Line 5775  sub retrieve_auto_file_handler {
     my ($filename)   = split(/:/, $tail);      my ($filename)   = split(/:/, $tail);
   
     my $source = $perlvar{'lonDaemons'}.'/tmp/'.$filename;      my $source = $perlvar{'lonDaemons'}.'/tmp/'.$filename;
     if ( (-e $source) && ($filename ne '') ) {      if ($filename =~m{/\.\./}) {
           &Failure($client, "refused\n", $userinput);
       } elsif ($filename !~ /^$LONCAPA::match_domain\_$LONCAPA::match_courseid\_.+_classlist\.xml$/) {
           &Failure($client, "refused\n", $userinput);
       } elsif ( (-e $source) && ($filename ne '') ) {
  my $reply = '';   my $reply = '';
  if (open(my $fh,$source)) {   if (open(my $fh,$source)) {
     while (<$fh>) {      while (<$fh>) {
Line 5117  sub crsreq_checks_handler { Line 5811  sub crsreq_checks_handler {
     my $userinput = "$cmd:$tail";      my $userinput = "$cmd:$tail";
     my $dom = $tail;      my $dom = $tail;
     my $result;      my $result;
     my @reqtypes = ('official','unofficial','community');      my @reqtypes = ('official','unofficial','community','textbook');
     eval {      eval {
         local($SIG{__DIE__})='DEFAULT';          local($SIG{__DIE__})='DEFAULT';
         my %validations;          my %validations;
Line 5144  sub crsreq_checks_handler { Line 5838  sub crsreq_checks_handler {
 sub validate_crsreq_handler {  sub validate_crsreq_handler {
     my ($cmd, $tail, $client) = @_;      my ($cmd, $tail, $client) = @_;
     my $userinput = "$cmd:$tail";      my $userinput = "$cmd:$tail";
     my ($dom,$owner,$crstype,$inststatuslist,$instcode,$instseclist) = split(/:/, $tail);      my ($dom,$owner,$crstype,$inststatuslist,$instcode,$instseclist,$customdata) = split(/:/, $tail);
     $instcode = &unescape($instcode);      $instcode = &unescape($instcode);
     $owner = &unescape($owner);      $owner = &unescape($owner);
     $crstype = &unescape($crstype);      $crstype = &unescape($crstype);
     $inststatuslist = &unescape($inststatuslist);      $inststatuslist = &unescape($inststatuslist);
     $instcode = &unescape($instcode);      $instcode = &unescape($instcode);
     $instseclist = &unescape($instseclist);      $instseclist = &unescape($instseclist);
       my $custominfo = &Apache::lonnet::thaw_unescape($customdata);
     my $outcome;      my $outcome;
     eval {      eval {
         local($SIG{__DIE__})='DEFAULT';          local($SIG{__DIE__})='DEFAULT';
         $outcome = &localenroll::validate_crsreq($dom,$owner,$crstype,          $outcome = &localenroll::validate_crsreq($dom,$owner,$crstype,
                                                  $inststatuslist,$instcode,                                                   $inststatuslist,$instcode,
                                                  $instseclist);                                                   $instseclist,$custominfo);
     };      };
     if (!$@) {      if (!$@) {
         &Reply($client, \$outcome, $userinput);          &Reply($client, \$outcome, $userinput);
Line 5167  sub validate_crsreq_handler { Line 5862  sub validate_crsreq_handler {
 }  }
 &register_handler("autocrsreqvalidation", \&validate_crsreq_handler, 0, 1, 0);  &register_handler("autocrsreqvalidation", \&validate_crsreq_handler, 0, 1, 0);
   
   sub crsreq_update_handler {
       my ($cmd, $tail, $client) = @_;
       my $userinput = "$cmd:$tail";
       my ($cdom,$cnum,$crstype,$action,$ownername,$ownerdomain,$fullname,$title,$code,
           $accessstart,$accessend,$infohashref) =
           split(/:/, $tail);
       $crstype = &unescape($crstype);
       $action = &unescape($action);
       $ownername = &unescape($ownername);
       $ownerdomain = &unescape($ownerdomain);
       $fullname = &unescape($fullname);
       $title = &unescape($title);
       $code = &unescape($code);
       $accessstart = &unescape($accessstart);
       $accessend = &unescape($accessend);
       my $incoming = &Apache::lonnet::thaw_unescape($infohashref);
       my ($result,$outcome);
       eval {
           local($SIG{__DIE__})='DEFAULT';
           my %rtnhash;
           $outcome = &localenroll::crsreq_updates($cdom,$cnum,$crstype,$action,
                                                   $ownername,$ownerdomain,$fullname,
                                                   $title,$code,$accessstart,$accessend,
                                                   $incoming,\%rtnhash);
           if ($outcome eq 'ok') {
               my @posskeys = qw(createdweb createdmsg createdcustomized createdactions queuedweb queuedmsg formitems reviewweb validationjs onload javascript);
               foreach my $key (keys(%rtnhash)) {
                   if (grep(/^\Q$key\E/,@posskeys)) {
                       $result .= &escape($key).'='.&Apache::lonnet::freeze_escape($rtnhash{$key}).'&';
                   }
               }
               $result =~ s/\&$//;
           }
       };
       if (!$@) {
           if ($outcome eq 'ok') {
               &Reply($client, \$result, $userinput);
           } else {
               &Reply($client, "format_error\n", $userinput);
           }
       } else {
           &Failure($client,"unknown_cmd\n",$userinput);
       }
       return 1;
   }
   &register_handler("autocrsrequpdate", \&crsreq_update_handler, 0, 1, 0);
   
 #  #
 #   Read and retrieve institutional code format (for support form).  #   Read and retrieve institutional code format (for support form).
 # Formal Parameters:  # Formal Parameters:
Line 5874  sub lcpasswdstrerror { Line 6616  sub lcpasswdstrerror {
     }      }
 }  }
   
 #  
 # Convert an error return code from lcuseradd to a string value:  
 #  
 sub lcuseraddstrerror {  
     my $ErrorCode = shift;  
     if(($ErrorCode < 0) || ($ErrorCode > $lastadderror)) {  
  return "lcuseradd - Unrecognized error code: ".$ErrorCode;  
     } else {  
  return $adderrors[$ErrorCode];  
     }  
 }  
   
 # grabs exception and records it to log before exiting  # grabs exception and records it to log before exiting
 sub catchexception {  sub catchexception {
     my ($error)=@_;      my ($error)=@_;
Line 5922  my $wwwid=getpwnam('www'); Line 6652  my $wwwid=getpwnam('www');
 if ($wwwid!=$<) {  if ($wwwid!=$<) {
    my $emailto="$perlvar{'lonAdmEMail'},$perlvar{'lonSysEMail'}";     my $emailto="$perlvar{'lonAdmEMail'},$perlvar{'lonSysEMail'}";
    my $subj="LON: $currenthostid User ID mismatch";     my $subj="LON: $currenthostid User ID mismatch";
    system("echo 'User ID mismatch.  lond must be run as user www.' |\     system("echo 'User ID mismatch.  lond must be run as user www.' |".
  mailto $emailto -s '$subj' > /dev/null");            " mail -s '$subj' $emailto > /dev/null");
    exit 1;     exit 1;
 }  }
   
Line 5946  if (-e $pidfile) { Line 6676  if (-e $pidfile) {
 $server = IO::Socket::INET->new(LocalPort => $perlvar{'londPort'},  $server = IO::Socket::INET->new(LocalPort => $perlvar{'londPort'},
                                 Type      => SOCK_STREAM,                                  Type      => SOCK_STREAM,
                                 Proto     => 'tcp',                                  Proto     => 'tcp',
                                 Reuse     => 1,                                  ReuseAddr     => 1,
                                 Listen    => 10 )                                  Listen    => 10 )
   or die "making socket: $@\n";    or die "making socket: $@\n";
   
Line 6009  sub HUPSMAN {                      # sig Line 6739  sub HUPSMAN {                      # sig
 #  a setuid perl script that can be root for us to do this job.  #  a setuid perl script that can be root for us to do this job.
 #  #
 sub ReloadApache {  sub ReloadApache {
     my $execdir = $perlvar{'lonDaemons'};  # --------------------------- Handle case of another apachereload process (locking)
     my $script  = $execdir."/apachereload";      if (&LONCAPA::try_to_lock('/tmp/lock_apachereload')) {
     system($script);          my $execdir = $perlvar{'lonDaemons'};
           my $script  = $execdir."/apachereload";
           system($script);
           unlink('/tmp/lock_apachereload'); #  Remove the lock file.
       }
 }  }
   
 #  #
Line 6184  sub logstatus { Line 6918  sub logstatus {
 sub initnewstatus {  sub initnewstatus {
     my $docdir=$perlvar{'lonDocRoot'};      my $docdir=$perlvar{'lonDocRoot'};
     my $fh=IO::File->new(">$docdir/lon-status/londstatus.txt");      my $fh=IO::File->new(">$docdir/lon-status/londstatus.txt");
     my $now=time;      my $now=time();
     my $local=localtime($now);      my $local=localtime($now);
     print $fh "LOND status $local - parent $$\n\n";      print $fh "LOND status $local - parent $$\n\n";
     opendir(DIR,"$docdir/lon-status/londchld");      opendir(DIR,"$docdir/lon-status/londchld");
Line 6275  $SIG{USR2} = \&UpdateHosts; Line 7009  $SIG{USR2} = \&UpdateHosts;
 &Apache::lonnet::load_hosts_tab();  &Apache::lonnet::load_hosts_tab();
 my %iphost = &Apache::lonnet::get_iphost(1);  my %iphost = &Apache::lonnet::get_iphost(1);
   
 my $dist=`$perlvar{'lonDaemons'}/distprobe`;  $dist=`$perlvar{'lonDaemons'}/distprobe`;
   
   my $arch = `uname -i`;
   chomp($arch);
   if ($arch eq 'unknown') {
       $arch = `uname -m`;
       chomp($arch);
   }
   
 # --------------------------------------------------------------  # --------------------------------------------------------------
 #   Accept connections.  When a connection comes in, it is validated  #   Accept connections.  When a connection comes in, it is validated
Line 6334  sub make_new_child { Line 7075  sub make_new_child {
             or die "Can't unblock SIGINT for fork: $!\n";              or die "Can't unblock SIGINT for fork: $!\n";
         $children{$pid} = $clientip;          $children{$pid} = $clientip;
         &status('Started child '.$pid);          &status('Started child '.$pid);
    close($client);
         return;          return;
     } else {      } else {
         # Child can *not* return from this subroutine.          # Child can *not* return from this subroutine.
Line 6342  sub make_new_child { Line 7084  sub make_new_child {
                                 #don't get intercepted                                  #don't get intercepted
         $SIG{USR1}= \&logstatus;          $SIG{USR1}= \&logstatus;
         $SIG{ALRM}= \&timeout;          $SIG{ALRM}= \&timeout;
    #
    # Block sigpipe as it gets thrownon socket disconnect and we want to 
    # deal with that as a read faiure instead.
    #
    my $blockset = POSIX::SigSet->new(SIGPIPE);
    sigprocmask(SIG_BLOCK, $blockset);
   
         $lastlog='Forked ';          $lastlog='Forked ';
         $status='Forked';          $status='Forked';
   
Line 6352  sub make_new_child { Line 7101  sub make_new_child {
 #        my $tmpsnum=0;            # Now global  #        my $tmpsnum=0;            # Now global
 #---------------------------------------------------- kerberos 5 initialization  #---------------------------------------------------- kerberos 5 initialization
         &Authen::Krb5::init_context();          &Authen::Krb5::init_context();
  unless (($dist eq 'fedora5') || ($dist eq 'fedora4') ||    
  ($dist eq 'fedora6') || ($dist eq 'suse9.3')) {          my $no_ets;
     &Authen::Krb5::init_ets();          if ($dist =~ /^(?:centos|rhes|scientific|oracle)(\d+)$/) {
  }              if ($1 >= 7) {
                   $no_ets = 1;
               }
           } elsif ($dist =~ /^suse(\d+\.\d+)$/) {
               if (($1 eq '9.3') || ($1 >= 12.2)) {
                   $no_ets = 1;
               }
           } elsif ($dist =~ /^sles(\d+)$/) {
               if ($1 > 11) {
                   $no_ets = 1;
               }
           } elsif ($dist =~ /^fedora(\d+)$/) {
               if ($1 < 7) {
                   $no_ets = 1;
               }
           }
           unless ($no_ets) {
               &Authen::Krb5::init_ets();
           }
   
  &status('Accepted connection');   &status('Accepted connection');
 # =============================================================================  # =============================================================================
Line 6399  sub make_new_child { Line 7166  sub make_new_child {
  #  If the remote is attempting a local init... give that a try:   #  If the remote is attempting a local init... give that a try:
  #   #
  (my $i, my $inittype, $clientversion) = split(/:/, $remotereq);   (my $i, my $inittype, $clientversion) = split(/:/, $remotereq);
                   # For LON-CAPA 2.9, the  client session will have sent its LON-CAPA
                   # version when initiating the connection. For LON-CAPA 2.8 and older,
                   # the version is retrieved from the global %loncaparevs in lonnet.pm.
                   # $clientversion contains path to keyfile if $inittype eq 'local'
                   # it's overridden below in this case
                   $clientversion ||= $Apache::lonnet::loncaparevs{$clientname};
   
  # If the connection type is ssl, but I didn't get my   # If the connection type is ssl, but I didn't get my
  # certificate files yet, then I'll drop  back to    # certificate files yet, then I'll drop  back to 
Line 6463  sub make_new_child { Line 7236  sub make_new_child {
   ."Attempted insecure connection disallowed </font>");    ."Attempted insecure connection disallowed </font>");
  close $client;   close $client;
  $clientok = 0;   $clientok = 0;
   
     }      }
  }   }
     } else {      } else {
Line 6472  sub make_new_child { Line 7244  sub make_new_child {
  ."$clientip failed to initialize: >$remotereq< </font>");   ."$clientip failed to initialize: >$remotereq< </font>");
  &status('No init '.$clientip);   &status('No init '.$clientip);
     }      }
       
  } else {   } else {
     &logthis(      &logthis(
      "<font color='blue'>WARNING: Unknown client $clientip</font>");       "<font color='blue'>WARNING: Unknown client $clientip</font>");
Line 6490  sub make_new_child { Line 7261  sub make_new_child {
 # ------------------------------------------------------------ Process requests  # ------------------------------------------------------------ Process requests
     my $keep_going = 1;      my $keep_going = 1;
     my $user_input;      my $user_input;
             @clientdoms = ();              my $clienthost = &Apache::lonnet::hostname($clientname);
             if (ref($iphost{$clientip}) eq 'ARRAY') {              my $clientserverhomeID = &Apache::lonnet::get_server_homeID($clienthost);
                 foreach my $id (@{$iphost{$clientip}}) {              $clienthomedom = &Apache::lonnet::host_domain($clientserverhomeID);
                     my $clientdom = &Apache::lonnet::host_domain($id);  
                     unless (grep(/^\Q$clientdom\E/,@clientdoms)) {  
                         push(@clientdoms,$clientdom);  
                     }  
                 }  
             }  
     while(($user_input = get_request) && $keep_going) {      while(($user_input = get_request) && $keep_going) {
  alarm(120);   alarm(120);
  Debug("Main: Got $user_input\n");   Debug("Main: Got $user_input\n");
Line 6548  sub is_author { Line 7313  sub is_author {
   
     #  Author role should show up as a key /domain/_au      #  Author role should show up as a key /domain/_au
   
     my $key    = "/$domain/_au";  
     my $value;      my $value;
     if (defined($hashref)) {      if ($hashref) {
  $value = $hashref->{$key};  
     }  
   
     if(defined($value)) {   my $key    = "/$domain/_au";
  &Debug("$user @ $domain is an author");   if (defined($hashref)) {
       $value = $hashref->{$key};
       if(!untie_user_hash($hashref)) {
    return 'error: ' .  ($!+0)." untie (GDBM) Failed";
       }
    }
   
    if(defined($value)) {
       &Debug("$user @ $domain is an author");
    }
       } else {
    return 'error: '.($!+0)." tie (GDBM) Failed";
     }      }
   
     return defined($value);      return defined($value);
 }  }
 #  #
 #   Checks to see if the input roleput request was to set  #   Checks to see if the input roleput request was to set
 # an author role.  If so, invokes the lchtmldir script to set  # an author role.  If so, creates construction space 
 # up a correct public_html   
 # Parameters:  # Parameters:
 #    request   - The request sent to the rolesput subchunk.  #    request   - The request sent to the rolesput subchunk.
 #                We're looking for  /domain/_au  #                We're looking for  /domain/_au
Line 6573  sub is_author { Line 7345  sub is_author {
 #  #
 sub manage_permissions {  sub manage_permissions {
     my ($request, $domain, $user, $authtype) = @_;      my ($request, $domain, $user, $authtype) = @_;
   
     &Debug("manage_permissions: $request $domain $user $authtype");  
   
     # See if the request is of the form /$domain/_au      # See if the request is of the form /$domain/_au
     if($request =~ /^(\/\Q$domain\E\/_au)$/) { # It's an author rolesput...      if($request =~ /^(\/\Q$domain\E\/_au)$/) { # It's an author rolesput...
  my $execdir = $perlvar{'lonDaemons'};          my $path=$perlvar{'lonDocRoot'}."/priv/$domain";
  my $userhome= "/home/$user" ;          unless (-e $path) {        
  &logthis("system $execdir/lchtmldir $userhome $user $authtype");             mkdir($path);
  &Debug("Setting homedir permissions for $userhome");          }
  system("$execdir/lchtmldir $userhome $user $authtype");          unless (-e $path.'/'.$user) {
              mkdir($path.'/'.$user);
           }
     }      }
 }  }
   
Line 6630  sub password_filename { Line 7401  sub password_filename {
 #    domain    - domain of the user.  #    domain    - domain of the user.
 #    name      - User's name.  #    name      - User's name.
 #    contents  - New contents of the file.  #    contents  - New contents of the file.
   #    saveold   - (optional). If true save old file in a passwd.bak file.
 # Returns:  # Returns:
 #   0    - Failed.  #   0    - Failed.
 #   1    - Success.  #   1    - Success.
 #  #
 sub rewrite_password_file {  sub rewrite_password_file {
     my ($domain, $user, $contents) = @_;      my ($domain, $user, $contents, $saveold) = @_;
   
     my $file = &password_filename($domain, $user);      my $file = &password_filename($domain, $user);
     if (defined $file) {      if (defined $file) {
           if ($saveold) {
               my $bakfile = $file.'.bak';
               if (CopyFile($file,$bakfile)) {
                   chmod(0400,$bakfile);
                   &logthis("Old password saved in passwd.bak for internally authenticated user: $user:$domain");
               } else {
                   &logthis("Failed to save old password in passwd.bak for internally authenticated user: $user:$domain");
               }
           }
  my $pf = IO::File->new(">$file");   my $pf = IO::File->new(">$file");
  if($pf) {   if($pf) {
     print $pf "$contents\n";      print $pf "$contents\n";
Line 6729  sub validate_user { Line 7510  sub validate_user {
                 $contentpwd = $domdefaults{'auth_arg_def'};                   $contentpwd = $domdefaults{'auth_arg_def'}; 
             }              }
         }          }
     }       }
     if ($howpwd ne 'nouser') {      if ($howpwd ne 'nouser') {
  if($howpwd eq "internal") { # Encrypted is in local password file.   if($howpwd eq "internal") { # Encrypted is in local password file.
     $validated = (crypt($password, $contentpwd) eq $contentpwd);              if (length($contentpwd) == 13) {
                   $validated = (crypt($password,$contentpwd) eq $contentpwd);
                   if ($validated) {
                       my %domdefaults = &Apache::lonnet::get_domain_defaults($domain);
                       if ($domdefaults{'intauth_switch'}) {
                           my $ncpass = &hash_passwd($domain,$password);
                           my $saveold;
                           if ($domdefaults{'intauth_switch'} == 2) {
                               $saveold = 1;
                           }
                           if (&rewrite_password_file($domain,$user,"$howpwd:$ncpass",$saveold)) {
                               &update_passwd_history($user,$domain,$howpwd,'conversion');
                               &logthis("Validated password hashed with bcrypt for $user:$domain");
                           }
                       }
                   }
               } else {
                   $validated = &check_internal_passwd($password,$contentpwd,$domain,$user);
               }
  }   }
  elsif ($howpwd eq "unix") { # User is a normal unix user.   elsif ($howpwd eq "unix") { # User is a normal unix user.
     $contentpwd = (getpwnam($user))[1];      $contentpwd = (getpwnam($user))[1];
Line 6800  sub validate_user { Line 7599  sub validate_user {
     return $validated;      return $validated;
 }  }
   
   sub check_internal_passwd {
       my ($plainpass,$stored,$domain,$user) = @_;
       my (undef,$method,@rest) = split(/!/,$stored);
       if ($method eq 'bcrypt') {
           my $result = &hash_passwd($domain,$plainpass,@rest);
           if ($result ne $stored) {
               return 0;
           }
           my %domdefaults = &Apache::lonnet::get_domain_defaults($domain);
           if ($domdefaults{'intauth_check'}) {
               # Upgrade to a larger number of rounds if necessary
               my $defaultcost = $domdefaults{'intauth_cost'};
               if (($defaultcost eq '') || ($defaultcost =~ /D/)) {
                   $defaultcost = 10;
               }
               if (int($rest[0])<int($defaultcost)) {
                   if ($domdefaults{'intauth_check'} == 1) {
                       my $ncpass = &hash_passwd($domain,$plainpass);
                       if (&rewrite_password_file($domain,$user,"internal:$ncpass")) {
                           &update_passwd_history($user,$domain,'internal','update cost');
                           &logthis("Validated password hashed with bcrypt for $user:$domain");
                       }
                       return 1;
                   } elsif ($domdefaults{'intauth_check'} == 2) {
                       return 0;
                   }
               }
           } else {
               return 1;
           }
       }
       return 0;
   }
   
   sub get_last_authchg {
       my ($domain,$user) = @_;
       my $lastmod;
       my $logname = &propath($domain,$user).'/passwd.log';
       if (-e "$logname") {
           $lastmod = (stat("$logname"))[9];
       }
       return $lastmod;
   }
   
 sub krb4_authen {  sub krb4_authen {
     my ($password,$null,$user,$contentpwd) = @_;      my ($password,$null,$user,$contentpwd) = @_;
     my $validated = 0;      my $validated = 0;
Line 7071  sub subscribe { Line 7914  sub subscribe {
                 # the metadata                  # the metadata
  unless ($fname=~/\.meta$/) { &unsub("$fname.meta",$clientip); }   unless ($fname=~/\.meta$/) { &unsub("$fname.meta",$clientip); }
  $fname=~s/\/home\/httpd\/html\/res/raw/;   $fname=~s/\/home\/httpd\/html\/res/raw/;
  $fname="http://".&Apache::lonnet::hostname($perlvar{'lonHostID'})."/".$fname;                  my $protocol = $Apache::lonnet::protocol{$perlvar{'lonHostID'}};
                   $protocol = 'http' if ($protocol ne 'https');
    $fname=$protocol.'://'.&Apache::lonnet::hostname($perlvar{'lonHostID'})."/".$fname;
  $result="$fname\n";   $result="$fname\n";
     }      }
  } else {   } else {
Line 7113  sub change_unix_password { Line 7958  sub change_unix_password {
   
   
 sub make_passwd_file {  sub make_passwd_file {
     my ($uname, $umode,$npass,$passfilename)=@_;      my ($uname,$udom,$umode,$npass,$passfilename,$action)=@_;
     my $result="ok";      my $result="ok";
     if ($umode eq 'krb4' or $umode eq 'krb5') {      if ($umode eq 'krb4' or $umode eq 'krb5') {
  {   {
     my $pf = IO::File->new(">$passfilename");      my $pf = IO::File->new(">$passfilename");
     if ($pf) {      if ($pf) {
  print $pf "$umode:$npass\n";   print $pf "$umode:$npass\n";
                   &update_passwd_history($uname,$udom,$umode,$action);
     } else {      } else {
  $result = "pass_file_failed_error";   $result = "pass_file_failed_error";
     }      }
  }   }
     } elsif ($umode eq 'internal') {      } elsif ($umode eq 'internal') {
  my $salt=time;          my $ncpass = &hash_passwd($udom,$npass);
  $salt=substr($salt,6,2);  
  my $ncpass=crypt($npass,$salt);  
  {   {
     &Debug("Creating internal auth");      &Debug("Creating internal auth");
     my $pf = IO::File->new(">$passfilename");      my $pf = IO::File->new(">$passfilename");
     if($pf) {      if($pf) {
  print $pf "internal:$ncpass\n";    print $pf "internal:$ncpass\n"; 
                   &update_passwd_history($uname,$udom,$umode,$action);
     } else {      } else {
  $result = "pass_file_failed_error";   $result = "pass_file_failed_error";
     }      }
Line 7142  sub make_passwd_file { Line 7987  sub make_passwd_file {
     my $pf = IO::File->new(">$passfilename");      my $pf = IO::File->new(">$passfilename");
     if($pf) {      if($pf) {
  print $pf "localauth:$npass\n";   print $pf "localauth:$npass\n";
                   &update_passwd_history($uname,$udom,$umode,$action);
     } else {      } else {
  $result = "pass_file_failed_error";   $result = "pass_file_failed_error";
     }      }
  }   }
     } elsif ($umode eq 'unix') {      } elsif ($umode eq 'unix') {
  {   &logthis(">>>Attempt to create unix account blocked -- unix auth not available for new users.");
     #   $result="no_new_unix_accounts";
     #  Don't allow the creation of privileged accounts!!! that would  
     #  be real bad!!!  
     #  
     my $uid = getpwnam($uname);  
     if((defined $uid) && ($uid == 0)) {  
  &logthis(">>>Attempted to create privilged account blocked");  
  return "no_priv_account_error\n";  
     }  
   
     my $execpath       ="$perlvar{'lonDaemons'}/"."lcuseradd";  
   
     my $lc_error_file  = $execdir."/tmp/lcuseradd".$$.".status";  
     {  
  &Debug("Executing external: ".$execpath);  
  &Debug("user  = ".$uname.", Password =". $npass);  
  my $se = IO::File->new("|$execpath > $perlvar{'lonDaemons'}/logs/lcuseradd.log");  
  print $se "$uname\n";  
  print $se "$npass\n";  
  print $se "$npass\n";  
  print $se "$lc_error_file\n"; # Status -> unique file.  
     }  
     if (-r $lc_error_file) {  
  &Debug("Opening error file: $lc_error_file");  
  my $error = IO::File->new("< $lc_error_file");  
  my $useraddok = <$error>;  
  $error->close;  
  unlink($lc_error_file);  
   
  chomp $useraddok;  
   
  if($useraddok > 0) {  
     my $error_text = &lcuseraddstrerror($useraddok);  
     &logthis("Failed lcuseradd: $error_text");  
     $result = "lcuseradd_failed:$error_text";  
  }  else {  
     my $pf = IO::File->new(">$passfilename");  
     if($pf) {  
  print $pf "unix:\n";  
     } else {  
  $result = "pass_file_failed_error";  
     }  
  }  
     }  else {  
  &Debug("Could not locate lcuseradd error: $lc_error_file");  
  $result="bug_lcuseradd_no_output_file";  
     }  
  }  
     } elsif ($umode eq 'none') {      } elsif ($umode eq 'none') {
  {   {
     my $pf = IO::File->new("> $passfilename");      my $pf = IO::File->new("> $passfilename");
Line 7259  sub get_usersession_config { Line 8058  sub get_usersession_config {
     return;      return;
 }  }
   
   sub get_usersearch_config {
       my ($dom,$name) = @_;
       my ($usersearchconf,$cached)=&Apache::lonnet::is_cached_new($name,$dom);
       if (defined($cached)) {
           return $usersearchconf;
       } else {
           my %domconfig = &Apache::lonnet::get_dom('configuration',['directorysrch'],$dom);
           &Apache::lonnet::do_cache_new($name,$dom,$domconfig{'directorysrch'},3600);
           return $domconfig{'directorysrch'};
       }
       return;
   }
   
   sub distro_and_arch {
       return $dist.':'.$arch;
   }
   
 # ----------------------------------- POD (plain old documentation, CPAN style)  # ----------------------------------- POD (plain old documentation, CPAN style)
   
 =head1 NAME  =head1 NAME
Line 7466  Place in B<logs/lond.log> Line 8282  Place in B<logs/lond.log>
   
 stores hash in namespace  stores hash in namespace
   
 =item rolesputy  =item rolesput
   
 put a role into a user's environment  put a role into a user's environment
   
Removed from v.1.447  
changed lines
  Added in v.1.489.2.40

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>