Annotation of loncom/lond, revision 1.178.2.6
1.1 albertel 1: #!/usr/bin/perl
2: # The LearningOnline Network
3: # lond "LON Daemon" Server (port "LOND" 5663)
1.60 www 4: #
1.178.2.6! foxr 5: # $Id: lond,v 1.178.2.5 2004/02/24 16:52:16 albertel Exp $
1.60 www 6: #
7: # Copyright Michigan State University Board of Trustees
8: #
9: # This file is part of the LearningOnline Network with CAPA (LON-CAPA).
10: #
11: # LON-CAPA is free software; you can redistribute it and/or modify
12: # it under the terms of the GNU General Public License as published by
1.167 foxr 13: # the Free Software Foundation; either version 2 of the License, or
1.60 www 14: # (at your option) any later version.
15: #
16: # LON-CAPA is distributed in the hope that it will be useful,
17: # but WITHOUT ANY WARRANTY; without even the implied warranty of
18: # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19: # GNU General Public License for more details.
20: #
21: # You should have received a copy of the GNU General Public License
22: # along with LON-CAPA; if not, write to the Free Software
1.178.2.1 foxr 23: # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
1.60 www 24: #
25: # /home/httpd/html/adm/gpl.txt
26: #
1.161 foxr 27:
28:
1.60 www 29: # http://www.lon-capa.org/
30: #
1.54 harris41 31:
1.134 albertel 32: use strict;
1.80 harris41 33: use lib '/home/httpd/lib/perl/';
34: use LONCAPA::Configuration;
35:
1.1 albertel 36: use IO::Socket;
37: use IO::File;
1.126 albertel 38: #use Apache::File;
1.1 albertel 39: use Symbol;
40: use POSIX;
41: use Crypt::IDEA;
42: use LWP::UserAgent();
1.3 www 43: use GDBM_File;
44: use Authen::Krb4;
1.91 albertel 45: use Authen::Krb5;
1.49 albertel 46: use lib '/home/httpd/lib/perl/';
47: use localauth;
1.143 foxr 48: use File::Copy;
1.169 foxr 49: use LONCAPA::ConfigFileEdit;
1.1 albertel 50:
1.178.2.2 foxr 51: my $DEBUG = 1; # Non zero to enable debug log entries.
1.77 foxr 52:
1.57 www 53: my $status='';
54: my $lastlog='';
55:
1.178.2.6! foxr 56: my $VERSION='$Revision: 1.178.2.5 $'; #' stupid emacs
1.121 albertel 57: my $remoteVERSION;
1.115 albertel 58: my $currenthostid;
59: my $currentdomainid;
1.134 albertel 60:
61: my $client;
1.140 foxr 62: my $clientip;
1.161 foxr 63: my $clientname;
1.140 foxr 64:
1.178.2.1 foxr 65: my $cipher; # Cipher key negotiated with client.
66: my $tmpsnum = 0;; # Id of tmpputs.
67:
1.134 albertel 68: my $server;
69: my $thisserver;
70:
1.178.2.1 foxr 71: #
72: # Connection type is:
73: # client - All client actions are allowed
74: # manager - only management functions allowed.
75: # both - Both management and client actions are allowed
76: #
77:
78: my $ConnectionType;
79:
80: my %hostid;
81: my %hostdom;
82: my %hostip;
83:
84: my %managers; # Ip -> manager names
85:
86: my %perlvar; # Will have the apache conf defined perl vars.
87:
88: #
89: # The hash below is used for command dispatching, and is therefore keyed on the request keyword.
90: # Each element of the hash contains a reference to an array that contains:
91: # A reference to a sub that executes the request corresponding to the keyword.
92: # A flag that is true if the request must be encoded to be acceptable.
93: # A mask with bits as follows:
94: # CLIENT_OK - Set when the function is allowed by ordinary clients
95: # MANAGER_OK - Set when the function is allowed to manager clients.
96: #
97: my $CLIENT_OK = 1;
98: my $MANAGER_OK = 2;
99: my %Dispatcher;
100:
101: #
102: # The array below are password error strings."
103: #
104: my $lastpwderror = 13; # Largest error number from lcpasswd.
105: my @passwderrors = ("ok",
106: "lcpasswd must be run as user 'www'",
107: "lcpasswd got incorrect number of arguments",
108: "lcpasswd did not get the right nubmer of input text lines",
109: "lcpasswd too many simultaneous pwd changes in progress",
110: "lcpasswd User does not exist.",
111: "lcpasswd Incorrect current passwd",
112: "lcpasswd Unable to su to root.",
113: "lcpasswd Cannot set new passwd.",
114: "lcpasswd Username has invalid characters",
115: "lcpasswd Invalid characters in password",
116: "11", "12",
117: "lcpasswd Password mismatch");
118:
119:
120: # The array below are lcuseradd error strings.:
121:
122: my $lastadderror = 13;
123: my @adderrors = ("ok",
124: "User ID mismatch, lcuseradd must run as user www",
125: "lcuseradd Incorrect number of command line parameters must be 3",
126: "lcuseradd Incorrect number of stdinput lines, must be 3",
127: "lcuseradd Too many other simultaneous pwd changes in progress",
128: "lcuseradd User does not exist",
129: "lcuseradd Unable to make www member of users's group",
130: "lcuseradd Unable to su to root",
131: "lcuseradd Unable to set password",
132: "lcuseradd Usrname has invalid characters",
133: "lcuseradd Password has an invalid character",
134: "lcuseradd User already exists",
135: "lcuseradd Could not add user.",
136: "lcuseradd Password mismatch");
137:
138: #
139: # Statistics that are maintained and dislayed in the status line.
140: #
141: my $Transactions; # Number of attempted transactions.
142: my $Failures; # Number of transcations failed.
143:
144: # ResetStatistics:
145: # Resets the statistics counters:
146: #
147: sub ResetStatistics {
148: $Transactions = 0;
149: $Failures = 0;
150: }
151:
152: #
153: # Return true if client is a manager.
154: #
155: sub isManager {
156: return (($ConnectionType eq "manager") || ($ConnectionType eq "both"));
157: }
158: #
159: # Return tru if client can do client functions
160: #
161: sub isClient {
162: return (($ConnectionType eq "client") || ($ConnectionType eq "both"));
163: }
164:
165:
166: #
167: # Get a Request:
168: # Gets a Request message from the client. The transaction
169: # is defined as a 'line' of text. We remove the new line
170: # from the text line.
171: #
172: sub GetRequest {
173: my $input = <$client>;
174: chomp($input);
175:
176: Debug("Request = $input\n");
177:
178: &status('Processing '.$clientname.':'.$input);
179:
180: return $input;
181: }
182: #
183: # Decipher encoded traffic
184: # Parameters:
185: # input - Encoded data.
186: # Returns:
187: # Decoded data or undef if encryption key was not yet negotiated.
188: # Implicit input:
189: # cipher - This global holds the negotiated encryption key.
190: #
191: sub Decipher {
1.178.2.4 albertel 192: my $input = shift;
193: my $output = '';
1.178.2.1 foxr 194:
195:
1.178.2.4 albertel 196: if($cipher) {
197: my($enc, $enclength, $encinput) = split(/:/, $input);
198: for(my $encidx = 0; $encidx < length($encinput); $encidx += 16) {
199: $output .=
200: $cipher->decrypt(pack("H16", substr($encinput, $encidx, 16)));
201: }
202: return substr($output, 0, $enclength);
203: } else {
204: return undef;
205: }
1.178.2.1 foxr 206: }
207:
208: #
209: # Register a command processor. This function is invoked to register a sub
210: # to process a request. Once registered, the ProcessRequest sub can automatically
211: # dispatch requests to an appropriate sub, and do the top level validity checking
212: # as well:
213: # - Is the keyword recognized.
214: # - Is the proper client type attempting the request.
215: # - Is the request encrypted if it has to be.
216: # Parameters:
217: # $RequestName - Name of the request being registered.
218: # This is the command request that will match
219: # against the hash keywords to lookup the information
220: # associated with the dispatch information.
221: # $Procedure - Reference to a sub to call to process the request.
222: # All subs get called as follows:
223: # Procedure($cmd, $tail, $replyfd, $key)
224: # $cmd - the actual keyword that invoked us.
225: # $tail - the tail of the request that invoked us.
226: # $replyfd- File descriptor connected to the client
227: # $MustEncode - True if the request must be encoded to be good.
228: # $ClientOk - True if it's ok for a client to request this.
229: # $ManagerOk - True if it's ok for a manager to request this.
230: # Side effects:
231: # - On success, the Dispatcher hash has an entry added for the key $RequestName
232: # - On failure, the program will die as it's a bad internal bug to try to
233: # register a duplicate command handler.
234: #
235: sub RegisterHandler {
1.178.2.4 albertel 236: my $RequestName = shift;
237: my $Procedure = shift;
238: my $MustEncode = shift;
239: my $ClientOk = shift;
240: my $ManagerOk = shift;
241:
242: # Don't allow duplication#
1.178.2.1 foxr 243:
1.178.2.4 albertel 244: if (defined $Dispatcher{$RequestName}) {
245: die "Attempting to define a duplicate request handler for $RequestName\n";
246: }
247: # Build the client type mask:
248:
249: my $ClientTypeMask = 0;
250: if($ClientOk) {
251: $ClientTypeMask |= $CLIENT_OK;
252: }
253: if($ManagerOk) {
254: $ClientTypeMask |= $MANAGER_OK;
255: }
256:
257: # Enter the hash:
1.178.2.1 foxr 258:
1.178.2.4 albertel 259: my @entry = ($Procedure, $MustEncode, $ClientTypeMask);
1.178.2.1 foxr 260:
1.178.2.4 albertel 261: $Dispatcher{$RequestName} = \@entry;
1.178.2.1 foxr 262:
263:
264: }
265:
266: #--------------------- Request Handlers --------------------------------------------
267: #
268: # By convention each request handler registers itself prior to the sub declaration:
269: #
270:
271: # Handles ping requests.
272: # Parameters:
273: # $cmd - the actual keyword that invoked us.
274: # $tail - the tail of the request that invoked us.
275: # $replyfd- File descriptor connected to the client
276: # Implicit Inputs:
277: # $currenthostid - Global variable that carries the name of the host we are
278: # known as.
279: # Returns:
280: # 1 - Ok to continue processing.
281: # 0 - Program should exit.
282: # Side effects:
283: # Reply information is sent to the client.
284:
285: sub PingHandler {
1.178.2.4 albertel 286: my $cmd = shift;
287: my $tail = shift;
288: my $client = shift;
1.178.2.1 foxr 289:
1.178.2.4 albertel 290: Reply( $client,"$currenthostid\n","$cmd:$tail");
1.178.2.1 foxr 291:
1.178.2.4 albertel 292: return 1;
1.178.2.1 foxr 293: }
294: RegisterHandler("ping", \&PingHandler, 0, 1, 1); # Ping unencoded, client or manager.
295: #
296: # Handles pong reequests:
297: # Parameters:
298: # $cmd - the actual keyword that invoked us.
299: # $tail - the tail of the request that invoked us.
300: # $replyfd- File descriptor connected to the client
301: # Implicit Inputs:
302: # $currenthostid - Global variable that carries the name of the host we are
303: # connected to.
304: # Returns:
305: # 1 - Ok to continue processing.
306: # 0 - Program should exit.
307: # Side effects:
308: # Reply information is sent to the client.
309:
310: sub PongHandler {
1.178.2.4 albertel 311: my $cmd = shift;
312: my $tail = shift;
313: my $replyfd = shift;
314:
315: my $reply=&reply("ping",$clientname);
316: Reply( $replyfd, "$currenthostid:$reply\n", "$cmd:$tail");
317: return 1;
1.178.2.1 foxr 318: }
319: RegisterHandler("pong", \&PongHandler, 0, 1, 1); # Pong unencoded, client or manager
320:
321: #
322: # EstablishKeyHandler:
323: # Called to establish an encrypted session key with the remote client.
324: #
325: # Parameters:
326: # $cmd - the actual keyword that invoked us.
327: # $tail - the tail of the request that invoked us.
328: # $replyfd- File descriptor connected to the client
329: # Implicit Inputs:
330: # $currenthostid - Global variable that carries the name of the host
331: # known as.
332: # $clientname - Global variable that carries the name of the hsot we're connected to.
333: # Returns:
334: # 1 - Ok to continue processing.
335: # 0 - Program should exit.
336: # Implicit Outputs:
337: # Reply information is sent to the client.
338: # $cipher is set with a reference to a new IDEA encryption object.
339: #
340: sub EstablishKeyHandler {
1.178.2.4 albertel 341: my $cmd = shift;
342: my $tail = shift;
343: my $replyfd = shift;
344:
345: my $buildkey=time.$$.int(rand 100000);
346: $buildkey=~tr/1-6/A-F/;
347: $buildkey=int(rand 100000).$buildkey.int(rand 100000);
348: my $key=$currenthostid.$clientname;
349: $key=~tr/a-z/A-Z/;
350: $key=~tr/G-P/0-9/;
351: $key=~tr/Q-Z/0-9/;
352: $key=$key.$buildkey.$key.$buildkey.$key.$buildkey;
353: $key=substr($key,0,32);
354: my $cipherkey=pack("H32",$key);
355: $cipher=new IDEA $cipherkey;
356: Reply($replyfd, "$buildkey\n", "$cmd:$tail");
1.178.2.1 foxr 357:
1.178.2.4 albertel 358: return 1;
1.178.2.1 foxr 359:
360: }
361: RegisterHandler("ekey", \&EstablishKeyHandler, 0, 1,1);
362:
363: # LoadHandler:
364: # Handler for the load command. Returns the current system load average
365: # to the requestor.
366: #
367: # Parameters:
368: # $cmd - the actual keyword that invoked us.
369: # $tail - the tail of the request that invoked us.
370: # $replyfd- File descriptor connected to the client
371: # Implicit Inputs:
372: # $currenthostid - Global variable that carries the name of the host
373: # known as.
374: # $clientname - Global variable that carries the name of the hsot we're connected to.
375: # Returns:
376: # 1 - Ok to continue processing.
377: # 0 - Program should exit.
378: # Side effects:
379: # Reply information is sent to the client.
380: sub LoadHandler {
1.178.2.4 albertel 381: my $cmd = shift;
382: my $tail = shift;
383: my $replyfd = shift;
1.178.2.1 foxr 384:
385: # Get the load average from /proc/loadavg and calculate it as a percentage of
386: # the allowed load limit as set by the perl global variable lonLoadLim
387:
1.178.2.4 albertel 388: my $loadavg;
389: my $loadfile=IO::File->new('/proc/loadavg');
1.178.2.1 foxr 390:
1.178.2.4 albertel 391: $loadavg=<$loadfile>;
392: $loadavg =~ s/\s.*//g; # Extract the first field only.
1.178.2.1 foxr 393:
1.178.2.4 albertel 394: my $loadpercent=100*$loadavg/$perlvar{'lonLoadLim'};
1.178.2.1 foxr 395:
1.178.2.4 albertel 396: Reply( $replyfd, "$loadpercent\n", "$cmd:$tail");
1.178.2.1 foxr 397:
1.178.2.4 albertel 398: return 1;
1.178.2.1 foxr 399: }
400: RegisterHandler("load", \&LoadHandler, 0, 1, 0);
401:
402:
403: #
404: # Process the userload request. This sub returns to the client the current
405: # user load average. It can be invoked either by clients or managers.
406: #
407: # Parameters:
408: # $cmd - the actual keyword that invoked us.
409: # $tail - the tail of the request that invoked us.
410: # $replyfd- File descriptor connected to the client
411: # Implicit Inputs:
412: # $currenthostid - Global variable that carries the name of the host
413: # known as.
414: # $clientname - Global variable that carries the name of the hsot we're connected to.
415: # Returns:
416: # 1 - Ok to continue processing.
417: # 0 - Program should exit
418: # Implicit inputs:
419: # whatever the userload() function requires.
420: # Implicit outputs:
421: # the reply is written to the client.
422: #
423: sub UserLoadHandler {
1.178.2.4 albertel 424: my $cmd = shift;
425: my $tail = shift;
426: my $replyfd = shift;
1.178.2.1 foxr 427:
1.178.2.4 albertel 428: my $userloadpercent=&userload();
429: Reply($replyfd, "$userloadpercent\n", "$cmd:$tail");
430:
431: return 1;
1.178.2.1 foxr 432: }
433: RegisterHandler("userload", \&UserLoadHandler, 0, 1, 0);
434:
435: # Process a request for the authorization type of a user:
436: # (userauth).
437: #
438: # Parameters:
439: # $cmd - the actual keyword that invoked us.
440: # $tail - the tail of the request that invoked us.
441: # $replyfd- File descriptor connected to the client
442: # Returns:
443: # 1 - Ok to continue processing.
444: # 0 - Program should exit
445: # Implicit outputs:
446: # The user authorization type is written to the client.
447: #
448: sub UserAuthorizationType {
1.178.2.4 albertel 449: my $cmd = shift;
450: my $tail = shift;
451: my $replyfd = shift;
452:
453: my $userinput = "$cmd:$tail";
454:
455: # Pull the domain and username out of the command tail.
456: # and call GetAuthType to determine the authentication type.
457:
458: my ($udom,$uname)=split(/:/,$tail);
459: my $result = GetAuthType($udom, $uname);
460: if($result eq "nouser") {
461: Failure( $replyfd, "unknown_user\n", $userinput);
462: } else {
463: Reply( $replyfd, "$result\n", $userinput);
464: }
1.178.2.1 foxr 465:
1.178.2.4 albertel 466: return 1;
1.178.2.1 foxr 467: }
468: RegisterHandler("currentauth", \&UserAuthorizationType, 1, 1, 0);
469: #
470: # Process a request by a manager to push a hosts or domain table
471: # to us. We pick apart the command and pass it on to the subs
472: # that already exist to do this.
473: #
474: # Parameters:
475: # $cmd - the actual keyword that invoked us.
476: # $tail - the tail of the request that invoked us.
477: # $client - File descriptor connected to the client
478: # Returns:
479: # 1 - Ok to continue processing.
480: # 0 - Program should exit
481: # Implicit Output:
482: # a reply is written to the client.
483:
484: sub PushFileHandler {
1.178.2.4 albertel 485: my $cmd = shift;
486: my $tail = shift;
487: my $client = shift;
1.178.2.1 foxr 488:
1.178.2.4 albertel 489: my $userinput = "$cmd:$tail";
1.178.2.1 foxr 490:
1.178.2.4 albertel 491: # At this time we only know that the IP of our partner is a valid manager
492: # the code below is a hook to do further authentication (e.g. to resolve
493: # spoofing).
1.178.2.1 foxr 494:
1.178.2.4 albertel 495: my $cert = GetCertificate($userinput);
496: if(ValidManager($cert)) {
1.178.2.1 foxr 497:
1.178.2.4 albertel 498: # Now presumably we have the bona fides of both the peer host and the
499: # process making the request.
1.178.2.1 foxr 500:
1.178.2.4 albertel 501: my $reply = PushFile($userinput);
502: Reply($client, "$reply\n", $userinput);
1.178.2.1 foxr 503:
1.178.2.4 albertel 504: } else {
505: Failure( $client, "refused\n", $userinput);
506: }
1.178.2.1 foxr 507: }
508: RegisterHandler("pushfile", \&PushFileHandler, 1, 0, 1);
509:
510:
511:
512: # Process a reinit request. Reinit requests that either
513: # lonc or lond be reinitialized so that an updated
514: # host.tab or domain.tab can be processed.
515: #
516: # Parameters:
517: # $cmd - the actual keyword that invoked us.
518: # $tail - the tail of the request that invoked us.
519: # $client - File descriptor connected to the client
520: # Returns:
521: # 1 - Ok to continue processing.
522: # 0 - Program should exit
523: # Implicit output:
524: # a reply is sent to the client.
525: #
526: sub ReinitProcessHandler {
1.178.2.4 albertel 527: my $cmd = shift;
528: my $tail = shift;
529: my $client = shift;
530:
531: my $userinput = "$cmd:$tail";
532:
533: my $cert = GetCertificate($userinput);
534: if(ValidManager($cert)) {
535: chomp($userinput);
536: my $reply = ReinitProcess($userinput);
537: Reply( $client, "$reply\n", $userinput);
538: } else {
539: Failure( $client, "refused\n", $userinput);
540: }
541: return 1;
1.178.2.1 foxr 542: }
543:
544: RegisterHandler("reinit", \&ReinitProcessHandler, 1, 0, 1);
545:
546: # Process the editing script for a table edit operation.
547: # the editing operation must be encrypted and requested by
548: # a manager host.
549: #
550: # Parameters:
551: # $cmd - the actual keyword that invoked us.
552: # $tail - the tail of the request that invoked us.
553: # $client - File descriptor connected to the client
554: # Returns:
555: # 1 - Ok to continue processing.
556: # 0 - Program should exit
557: # Implicit output:
558: # a reply is sent to the client.
559: #
560: sub EditTableHandler {
1.178.2.4 albertel 561: my $command = shift;
562: my $tail = shift;
563: my $client = shift;
564:
565: my $userinput = "$command:$tail";
566:
567: my $cert = GetCertificate($userinput);
568: if(ValidManager($cert)) {
569: my($filetype, $script) = split(/:/, $tail);
570: if (($filetype eq "hosts") ||
571: ($filetype eq "domain")) {
572: if($script ne "") {
573: Reply($client, # BUGBUG - EditFile
574: EditFile($userinput), # could fail.
575: $userinput);
576: } else {
577: Failure($client,"refused\n",$userinput);
578: }
579: } else {
580: Failure($client,"refused\n",$userinput);
581: }
582: } else {
583: Failure($client,"refused\n",$userinput);
584: }
585: return 1;
1.178.2.1 foxr 586: }
587: RegisterHandler("edit", \&EditTableHandler, 1, 0, 1);
588:
589:
590: #
591: # Authenticate a user against the LonCAPA authentication
592: # database. Note that there are several authentication
593: # possibilities:
594: # - unix - The user can be authenticated against the unix
595: # password file.
596: # - internal - The user can be authenticated against a purely
597: # internal per user password file.
598: # - kerberos - The user can be authenticated against either a kerb4 or kerb5
599: # ticket granting authority.
1.178.2.4 albertel 600: # - user - The person tailoring LonCAPA can supply a user authentication
601: # mechanism that is per system.
1.178.2.1 foxr 602: #
603: # Parameters:
604: # $cmd - The command that got us here.
605: # $tail - Tail of the command (remaining parameters).
606: # $client - File descriptor connected to client.
607: # Returns
608: # 0 - Requested to exit, caller should shut down.
609: # 1 - Continue processing.
610: # Implicit inputs:
611: # The authentication systems describe above have their own forms of implicit
612: # input into the authentication process that are described above.
613: #
614: sub AuthenticateHandler {
1.178.2.4 albertel 615: my $cmd = shift;
616: my $tail = shift;
617: my $client = shift;
618:
619: # Regenerate the full input line
620:
621: my $userinput = $cmd.":".$tail;
622:
623: # udom - User's domain.
624: # uname - Username.
625: # upass - User's password.
626:
627: my ($udom,$uname,$upass)=split(/:/,$tail);
628: Debug(" Authenticate domain = $udom, user = $uname, password = $upass");
629: chomp($upass);
630: $upass=unescape($upass);
631: my $proname=propath($udom,$uname);
632: my $passfilename="$proname/passwd";
633:
634: # The user's 'personal' loncapa passworrd file describes how to authenticate:
635:
636: if (-e $passfilename) {
637: Debug("Located password file: $passfilename");
638:
639: my $pf = IO::File->new($passfilename);
640: my $realpasswd=<$pf>;
641: chomp($realpasswd);
642: my ($howpwd,$contentpwd)=split(/:/,$realpasswd);
643: my $pwdcorrect=0;
644: #
645: # Authenticate against password stored in the internal file.
646: #
647: Debug("Authenticating via $howpwd");
648: if ($howpwd eq 'internal') {
649: &Debug("Internal auth");
650: $pwdcorrect= (crypt($upass,$contentpwd) eq $contentpwd);
651: #
652: # Authenticate against the unix password file.
653: #
654: } elsif ($howpwd eq 'unix') {
655: &Debug("Unix auth");
656: if((getpwnam($uname))[1] eq "") { #no such user!
657: $pwdcorrect = 0;
658: } else {
659: $contentpwd=(getpwnam($uname))[1];
660: my $pwauth_path="/usr/local/sbin/pwauth";
661: unless ($contentpwd eq 'x') {
662: $pwdcorrect= (crypt($upass,$contentpwd) eq $contentpwd);
663: } elsif (-e $pwauth_path) {
664: open PWAUTH, "|$pwauth_path" or
665: die "Cannot invoke authentication";
666: print PWAUTH "$uname\n$upass\n";
667: close PWAUTH;
668: $pwdcorrect=!$?;
669: }
670: }
671: #
672: # Authenticate against a Kerberos 4 server:
673: #
674: } elsif ($howpwd eq 'krb4') {
675: my $null=pack("C",0);
676: unless ($upass=~/$null/) {
677: my $krb4_error = &Authen::Krb4::get_pw_in_tkt($uname,
678: "",
679: $contentpwd,
680: 'krbtgt',
681: $contentpwd,
682: 1,
683: $upass);
684: if (!$krb4_error) {
685: $pwdcorrect = 1;
686: } else {
687: $pwdcorrect=0;
688: # log error if it is not a bad password
689: if ($krb4_error != 62) {
690: &logthis('krb4:'.$uname.','.$contentpwd.','.
691: &Authen::Krb4::get_err_txt($Authen::Krb4::error));
692: }
693: }
694: }
695: #
696: # Authenticate against a Kerberos 5 server:
697: #
698: } elsif ($howpwd eq 'krb5') {
699: my $null=pack("C",0);
700: unless ($upass=~/$null/) {
701: my $krbclient=&Authen::Krb5::parse_name($uname.'@'.$contentpwd);
702: my $krbservice="krbtgt/".$contentpwd."\@".$contentpwd;
703: my $krbserver=&Authen::Krb5::parse_name($krbservice);
704: my $credentials=&Authen::Krb5::cc_default();
705: $credentials->initialize($krbclient);
706: my $krbreturn = &Authen::Krb5::get_in_tkt_with_password($krbclient,
707: $krbserver,
708: $upass,
709: $credentials);
710: $pwdcorrect = ($krbreturn == 1);
711: } else {
712: $pwdcorrect=0;
713: }
714: #
715: # Finally, the user may have written in an authentication module.
716: # in that case, if requested, authenticate against it.
717: #
718: } elsif ($howpwd eq 'localauth') {
719: $pwdcorrect=&localauth::localauth($uname,$upass,$contentpwd);
720: }
721: #
722: # Successfully authorized.
723: #
724: if ($pwdcorrect) {
725: Reply( $client, "authorized\n", $userinput);
726: #
727: # Bad credentials: Failed to authorize
728: #
729: } else {
730: Failure( $client, "non_authorized\n", $userinput);
731: }
732: #
733: # User bad... note it may be bad security practice to
734: # differntiate to the caller a bad user from a bad
735: # passwd... since that supplies covert channel information
736: # (you have a good user but bad password e.g.) to guessers.
737: #
738: } else {
739: Failure( $client, "unknown_user\n", $userinput);
740: }
741: return 1;
1.178.2.1 foxr 742: }
743: RegisterHandler("auth", \&AuthenticateHandler, 1, 1, 0);
744:
745: #
746: # Change a user's password. Note that this function is complicated by
747: # the fact that a user may be authenticated in more than one way:
748: # At present, we are not able to change the password for all types of
749: # authentication methods. Only for:
750: # unix - unix password or shadow passoword style authentication.
751: # local - Locally written authentication mechanism.
752: # For now, kerb4 and kerb5 password changes are not supported and result
753: # in an error.
754: # FUTURE WORK:
755: # Support kerberos passwd changes?
756: # Parameters:
757: # $cmd - The command that got us here.
758: # $tail - Tail of the command (remaining parameters).
759: # $client - File descriptor connected to client.
760: # Returns
761: # 0 - Requested to exit, caller should shut down.
762: # 1 - Continue processing.
763: # Implicit inputs:
764: # The authentication systems describe above have their own forms of implicit
765: # input into the authentication process that are described above.
766: sub ChangePasswordHandler {
1.178.2.4 albertel 767: my $cmd = shift;
768: my $tail = shift;
769: my $client = shift;
770:
771: my $userinput = $cmd.":".$tail; # Reconstruct client's string.
772:
773: #
774: # udom - user's domain.
775: # uname - Username.
776: # upass - Current password.
777: # npass - New password.
778:
779: my ($udom,$uname,$upass,$npass)=split(/:/,$tail);
780: chomp($npass);
781: $upass=&unescape($upass);
782: $npass=&unescape($npass);
783: &Debug("Trying to change password for $uname");
784: my $proname=propath($udom,$uname);
785: my $passfilename="$proname/passwd";
786: if (-e $passfilename) {
787: my $realpasswd;
788: {
789: my $pf = IO::File->new($passfilename);
790: $realpasswd=<$pf>;
791: }
792: chomp($realpasswd);
793: my ($howpwd,$contentpwd)=split(/:/,$realpasswd);
794: if ($howpwd eq 'internal') {
795: &Debug("internal auth");
796: if (crypt($upass,$contentpwd) eq $contentpwd) {
797: my $salt=time;
798: $salt=substr($salt,6,2);
799: my $ncpass=crypt($npass,$salt);
800: {
801: my $pf = IO::File->new(">$passfilename");
802: if ($pf) {
803: print $pf "internal:$ncpass\n";
804: &logthis("Result of password change for "
805: ."$uname: pwchange_success");
806: Reply($client, "ok\n", $userinput);
807: } else {
808: &logthis("Unable to open $uname passwd "
809: ."to change password");
810: Failure( $client, "non_authorized\n",$userinput);
811: }
812: }
813: } else {
814: Failure($client, "non_authorized\n", $userinput);
815: }
816: } elsif ($howpwd eq 'unix') {
817: # Unix means we have to access /etc/password
818: # one way or another.
819: # First: Make sure the current password is
820: # correct
821: &Debug("auth is unix");
822: $contentpwd=(getpwnam($uname))[1];
823: my $pwdcorrect = "0";
824: my $pwauth_path="/usr/local/sbin/pwauth";
825: unless ($contentpwd eq 'x') {
826: $pwdcorrect= (crypt($upass,$contentpwd) eq $contentpwd);
827: } elsif (-e $pwauth_path) {
828: open PWAUTH, "|$pwauth_path" or
829: die "Cannot invoke authentication";
830: print PWAUTH "$uname\n$upass\n";
831: close PWAUTH;
832: &Debug("exited pwauth with $? ($uname,$upass) ");
833: $pwdcorrect=($? == 0);
834: }
835: if ($pwdcorrect) {
836: my $execdir=$perlvar{'lonDaemons'};
837: &Debug("Opening lcpasswd pipeline");
838: my $pf = IO::File->new("|$execdir/lcpasswd > "
839: ."$perlvar{'lonDaemons'}"
840: ."/logs/lcpasswd.log");
841: print $pf "$uname\n$npass\n$npass\n";
842: close $pf;
843: my $err = $?;
844: my $result = ($err>0 ? 'pwchange_failure' : 'ok');
845: &logthis("Result of password change for $uname: ".
846: &lcpasswdstrerror($?));
847: Reply($client, "$result\n", $userinput);
848: } else {
849: Reply($client, "non_authorized\n", $userinput);
850: }
851: } else {
852: Reply( $client, "auth_mode_error\n", $userinput);
853: }
854: } else {
855: Reply( $client, "unknown_user\n", $userinput);
856: }
857: return 1;
1.178.2.1 foxr 858: }
859: RegisterHandler("passwd", \&ChangePasswordHandler, 1, 1, 0);
860:
861: #
862: # Create a new user. User in this case means a lon-capa user.
863: # The user must either already exist in some authentication realm
864: # like kerberos or the /etc/passwd. If not, a user completely local to
865: # this loncapa system is created.
866: #
867: # Parameters:
868: # $cmd - The command that got us here.
869: # $tail - Tail of the command (remaining parameters).
870: # $client - File descriptor connected to client.
871: # Returns
872: # 0 - Requested to exit, caller should shut down.
873: # 1 - Continue processing.
874: # Implicit inputs:
875: # The authentication systems describe above have their own forms of implicit
876: # input into the authentication process that are described above.
877: sub AddUserHandler {
1.178.2.4 albertel 878: my $cmd = shift;
879: my $tail = shift;
880: my $client = shift;
881:
882: my $userinput = $cmd.":".$tail;
883:
884: my $oldumask=umask(0077);
885: my ($udom,$uname,$umode,$npass)=split(/:/,$tail);
886: &Debug("cmd =".$cmd." $udom =".$udom." uname=".$uname);
887: chomp($npass);
888: $npass=&unescape($npass);
889: my $proname=propath($udom,$uname);
890: my $passfilename="$proname/passwd";
891: &Debug("Password file created will be:".$passfilename);
892: if (-e $passfilename) {
893: Failure( $client, "already_exists\n", $userinput);
894: } elsif ($udom ne $currentdomainid) {
895: Failure($client, "not_right_domain\n", $userinput);
896: } else {
897: my @fpparts=split(/\//,$proname);
898: my $fpnow=$fpparts[0].'/'.$fpparts[1].'/'.$fpparts[2];
899: my $fperror='';
900: for (my $i=3;$i<=$#fpparts;$i++) {
901: $fpnow.='/'.$fpparts[$i];
902: unless (-e $fpnow) {
903: unless (mkdir($fpnow,0777)) {
904: $fperror="error: ".($!+0)." mkdir failed while attempting "
905: ."makeuser";
906: }
907: }
908: }
909: unless ($fperror) {
910: my $result=&make_passwd_file($uname, $umode,$npass, $passfilename);
911: Reply($client, $result, $userinput); #BUGBUG - could be fail
912: } else {
913: Failure($client, "$fperror\n", $userinput);
914: }
915: }
916: umask($oldumask);
917: return 1;
1.178.2.1 foxr 918:
919: }
920: RegisterHandler("makeuser", \&AddUserHandler, 1, 1, 0);
921:
922: #
923: # Change the authentication method of a user. Note that this may
924: # also implicitly change the user's password if, for example, the user is
925: # joining an existing authentication realm. Known authentication realms at
926: # this time are:
927: # internal - Purely internal password file (only loncapa knows this user)
928: # local - Institutionally written authentication module.
929: # unix - Unix user (/etc/passwd with or without /etc/shadow).
930: # kerb4 - kerberos version 4
931: # kerb5 - kerberos version 5
932: #
933: # Parameters:
934: # $cmd - The command that got us here.
935: # $tail - Tail of the command (remaining parameters).
936: # $client - File descriptor connected to client.
937: # Returns
938: # 0 - Requested to exit, caller should shut down.
939: # 1 - Continue processing.
940: # Implicit inputs:
941: # The authentication systems describe above have their own forms of implicit
942: # input into the authentication process that are described above.
943: #
944: sub ChangeAuthenticationHandler {
1.178.2.4 albertel 945: my $cmd = shift;
946: my $tail = shift;
947: my $client = shift;
948:
949: my $userinput = "$cmd:$tail"; # Reconstruct user input.
950:
951: my ($udom,$uname,$umode,$npass)=split(/:/,$tail);
952: chomp($npass);
953: &Debug("cmd = ".$cmd." domain= ".$udom."uname =".$uname." umode= ".$umode);
954: $npass=&unescape($npass);
955: my $proname=&propath($udom,$uname);
956: my $passfilename="$proname/passwd";
957: if ($udom ne $currentdomainid) {
958: Failure( $client, "not_right_domain\n", $client);
959: } else {
960: my $result=&make_passwd_file($uname, $umode,$npass,$passfilename);
961: Reply($client, $result, $userinput);
962: }
963: return 1;
1.178.2.1 foxr 964: }
965: RegisterHandler("changeuserauth", \&ChangeAuthenticationHandler, 1,1, 0);
966:
967: #
968: # Determines if this is the home server for a user. The home server
969: # for a user will have his/her lon-capa passwd file. Therefore all we need
970: # to do is determine if this file exists.
971: #
972: # Parameters:
973: # $cmd - The command that got us here.
974: # $tail - Tail of the command (remaining parameters).
975: # $client - File descriptor connected to client.
976: # Returns
977: # 0 - Requested to exit, caller should shut down.
978: # 1 - Continue processing.
979: # Implicit inputs:
980: # The authentication systems describe above have their own forms of implicit
981: # input into the authentication process that are described above.
982: #
983: sub IsHomeHandler {
1.178.2.4 albertel 984: my $cmd = shift;
985: my $tail = shift;
986: my $client = shift;
987:
988: my $userinput = "$cmd:$tail";
989:
990: my ($udom,$uname)=split(/:/,$tail);
991: chomp($uname);
992: my $proname=propath($udom,$uname);
993: if (-e $proname) {
994: Reply( $client, "found\n", $userinput);
995: } else {
996: Failure($client, "not_found\n", $userinput);
997: }
998: return 1;
1.178.2.1 foxr 999: }
1000: RegisterHandler("home", \&IsHomeHandler, 0,1,0);
1001: #
1002: # Process an update request for a resource?? I think what's going on here is
1003: # that a resource has been modified that we hold a subscription to.
1004: # If the resource is not local, then we must update, or at least invalidate our
1005: # cached copy of the resource.
1006: # FUTURE WORK:
1007: # I need to look at this logic carefully. My druthers would be to follow
1008: # typical caching logic, and simple invalidate the cache, drop any subscription
1009: # an let the next fetch start the ball rolling again... however that may
1010: # actually be more difficult than it looks given the complex web of
1011: # proxy servers.
1012: # Parameters:
1013: # $cmd - The command that got us here.
1014: # $tail - Tail of the command (remaining parameters).
1015: # $client - File descriptor connected to client.
1016: # Returns
1017: # 0 - Requested to exit, caller should shut down.
1018: # 1 - Continue processing.
1019: # Implicit inputs:
1020: # The authentication systems describe above have their own forms of implicit
1021: # input into the authentication process that are described above.
1022: #
1023: sub UpdateResourceHandler {
1.178.2.4 albertel 1024: my $cmd = shift;
1025: my $tail = shift;
1026: my $client = shift;
1027:
1028: my $userinput = "$cmd:$tail";
1029:
1030: my $fname=$tail;
1031: my $ownership=ishome($fname);
1032: if ($ownership eq 'not_owner') {
1033: if (-e $fname) {
1034: my ($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$size,
1035: $atime,$mtime,$ctime,$blksize,$blocks)=stat($fname);
1036: my $now=time;
1037: my $since=$now-$atime;
1038: if ($since>$perlvar{'lonExpire'}) {
1039: my $reply=&reply("unsub:$fname","$clientname");
1040: unlink("$fname");
1041: } else {
1042: my $transname="$fname.in.transfer";
1043: my $remoteurl=&reply("sub:$fname","$clientname");
1044: my $response;
1045: alarm(120);
1046: {
1047: my $ua=new LWP::UserAgent;
1048: my $request=new HTTP::Request('GET',"$remoteurl");
1049: $response=$ua->request($request,$transname);
1050: }
1051: alarm(0);
1052: if ($response->is_error()) {
1053: unlink($transname);
1054: my $message=$response->status_line;
1055: &logthis("LWP GET: $message for $fname ($remoteurl)");
1056: } else {
1057: if ($remoteurl!~/\.meta$/) {
1058: alarm(120);
1059: {
1060: my $ua=new LWP::UserAgent;
1061: my $mrequest=new HTTP::Request('GET',$remoteurl.'.meta');
1062: my $mresponse=$ua->request($mrequest,$fname.'.meta');
1063: if ($mresponse->is_error()) {
1064: unlink($fname.'.meta');
1065: }
1066: }
1067: alarm(0);
1068: }
1069: rename($transname,$fname);
1070: }
1071: }
1072: Reply( $client, "ok\n", $userinput);
1073: } else {
1074: Failure($client, "not_found\n", $userinput);
1075: }
1076: } else {
1077: Failure($client, "rejected\n", $userinput);
1078: }
1079: return 1;
1.178.2.1 foxr 1080: }
1081: RegisterHandler("update", \&UpdateResourceHandler, 0 ,1, 0);
1082:
1083: #
1084: # Fetch a user file from a remote server:
1085: # Parameters:
1086: # $cmd - The command that got us here.
1087: # $tail - Tail of the command (remaining parameters).
1088: # $client - File descriptor connected to client.
1089: # Returns
1090: # 0 - Requested to exit, caller should shut down.
1091: # 1 - Continue processing.
1092: #
1093: sub FetchUserFileHandler {
1.178.2.4 albertel 1094: my $cmd = shift;
1095: my $tail = shift;
1096: my $client = shift;
1097:
1098: my $userinput = "$cmd:$tail";
1099: my $fname = $tail;
1100: my ($udom,$uname,$ufile)=split(/\//,$fname);
1101: my $udir=propath($udom,$uname).'/userfiles';
1102: unless (-e $udir) {
1103: mkdir($udir,0770);
1104: }
1105: if (-e $udir) {
1106: $ufile=~s/^[\.\~]+//;
1107: $ufile=~s/\///g;
1108: my $destname=$udir.'/'.$ufile;
1109: my $transname=$udir.'/'.$ufile.'.in.transit';
1110: my $remoteurl='http://'.$clientip.'/userfiles/'.$fname;
1111: my $response;
1112: alarm(120);
1113: {
1114: my $ua=new LWP::UserAgent;
1115: my $request=new HTTP::Request('GET',"$remoteurl");
1116: $response=$ua->request($request,$transname);
1117: }
1118: alarm(0);
1119: if ($response->is_error()) {
1120: unlink($transname);
1121: my $message=$response->status_line;
1122: &logthis("LWP GET: $message for $fname ($remoteurl)");
1123: Failure($client, "failed\n", $userinput);
1124: } else {
1125: if (!rename($transname,$destname)) {
1126: &logthis("Unable to move $transname to $destname");
1127: unlink($transname);
1128: Failure($client, "failed\n", $userinput);
1129: } else {
1130: Reply($client, "ok\n", $userinput);
1131: }
1132: }
1133: } else {
1134: Failure($client, "not_home\n", $userinput);
1135: }
1136: return 1;
1.178.2.1 foxr 1137: }
1138: RegisterHandler("fetchuserfile", \&FetchUserFileHandler, 0, 1, 0);
1139: #
1140: # Authenticate access to a user file. Question? The token for athentication
1141: # is allowed to be sent as cleartext is this really what we want? This token
1142: # represents the user's session id. Once it is forged does this allow too much access??
1143: #
1144: # Parameters:
1145: # $cmd - The command that got us here.
1146: # $tail - Tail of the command (remaining parameters).
1147: # $client - File descriptor connected to client.
1148: # Returns
1149: # 0 - Requested to exit, caller should shut down.
1150: # 1 - Continue processing.
1151: sub AuthenticateUserFileAccess {
1.178.2.4 albertel 1152: my $cmd = shift;
1153: my $tail = shift;
1154: my $client = shift;
1155: my $userinput = "$cmd:$tail";
1156:
1157: my ($fname,$session)=split(/:/,$tail);
1158: chomp($session);
1159: my $reply='non_auth';
1160: if (open(ENVIN,$perlvar{'lonIDsDir'}.'/'.$session.'.id')) {
1161: while (my $line=<ENVIN>) {
1162: if ($line=~/userfile\.$fname\=/) {
1163: $reply='ok';
1164: }
1165: }
1166: close(ENVIN);
1167: Reply($client, $reply."\n", $userinput);
1168: } else {
1169: Failure($client, "invalid_token\n", $userinput);
1170: }
1171: return 1;
1.178.2.1 foxr 1172:
1173: }
1174: RegisterHandler("tokenauthuserfile", \&AuthenticateUserFileAccess, 0, 1, 0);
1175: #
1176: # Unsubscribe from a resource.
1177: #
1178: # Parameters:
1179: # $cmd - The command that got us here.
1180: # $tail - Tail of the command (remaining parameters).
1181: # $client - File descriptor connected to client.
1182: # Returns
1183: # 0 - Requested to exit, caller should shut down.
1184: # 1 - Continue processing.
1185: #
1186: sub UnsubscribeHandler {
1.178.2.4 albertel 1187: my $cmd = shift;
1188: my $tail = shift;
1189: my $client = shift;
1190: my $userinput= "$cmd:$tail";
1191:
1192: my $fname = $tail;
1193: if (-e $fname) {
1194: Reply($client, &unsub($client,$fname,$clientip), $userinput);
1195: } else {
1196: Failure($client, "not_found\n", $userinput);
1197: }
1198: return 1;
1.178.2.1 foxr 1199: }
1200: RegisterHandler("unusb", \&UnsubscribeHandler, 0, 1, 0);
1201:
1202: # Subscribe to a resource.
1203: #
1204: # Parameters:
1205: # $cmd - The command that got us here.
1206: # $tail - Tail of the command (remaining parameters).
1207: # $client - File descriptor connected to client.
1208: # Returns
1209: # 0 - Requested to exit, caller should shut down.
1210: # 1 - Continue processing.
1211: #
1212: sub SubscribeHandler {
1.178.2.4 albertel 1213: my $cmd = shift;
1214: my $tail = shift;
1215: my $client = shift;
1216: my $userinput = "$cmd:$tail";
1.178.2.1 foxr 1217:
1.178.2.4 albertel 1218: Reply( $client, &subscribe($userinput,$clientip), $userinput);
1219:
1220: return 1;
1.178.2.1 foxr 1221: }
1222: RegisterHandler("sub", \&SubscribeHandler, 0, 1, 0);
1223:
1224: #
1225: # Determine the version of a resource (?) Or is it return
1226: # the top version of the resource? Not yet clear from the
1227: # code in currentversion.
1228: #
1229: # Parameters:
1230: # $cmd - The command that got us here.
1231: # $tail - Tail of the command (remaining parameters).
1232: # $client - File descriptor connected to client.
1233: # Returns
1234: # 0 - Requested to exit, caller should shut down.
1235: # 1 - Continue processing.
1236: #
1237: sub CurrentVersionHandler {
1.178.2.4 albertel 1238: my $cmd = shift;
1239: my $tail = shift;
1240: my $client = shift;
1241: my $userinput= "$cmd:$tail";
1242:
1243: my $fname = $tail;
1244: Reply( $client, ¤tversion($fname)."\n", $userinput);
1245: return 1;
1.178.2.1 foxr 1246:
1247: }
1248: RegisterHandler("currentversion", \&CurrentVersionHandler, 0, 1, 0);
1249:
1250:
1251: # Make an entry in a user's activity log.
1252: #
1253: # Parameters:
1254: # $cmd - The command that got us here.
1255: # $tail - Tail of the command (remaining parameters).
1256: # $client - File descriptor connected to client.
1257: # Returns
1258: # 0 - Requested to exit, caller should shut down.
1259: # 1 - Continue processing.
1260: #
1261: sub ActivityLogEntryHandler {
1.178.2.4 albertel 1262: my $cmd = shift;
1263: my $tail = shift;
1264: my $client = shift;
1265: my $userinput= "$cmd:$tail";
1266:
1267: my ($udom,$uname,$what)=split(/:/,$tail);
1268: chomp($what);
1269: my $proname=propath($udom,$uname);
1270: my $now=time;
1271: my $hfh;
1272: if ($hfh=IO::File->new(">>$proname/activity.log")) {
1273: print $hfh "$now:$clientname:$what\n";
1274: Reply( $client, "ok\n", $userinput);
1275: } else {
1276: Reply($client, "error: ".($!+0)." IO::File->new Failed "
1277: ."while attempting log\n",
1278: $userinput);
1279: }
1.178.2.1 foxr 1280:
1.178.2.4 albertel 1281: return 1;
1.178.2.1 foxr 1282: }
1283: RegisterHandler("log", \&ActivityLogEntryHandler, 0, 1, 0);
1284: #
1285: # Put a namespace entry in a user profile hash.
1286: # My druthers would be for this to be an encrypted interaction too.
1287: # anything that might be an inadvertent covert channel about either
1288: # user authentication or user personal information....
1289: #
1290: # Parameters:
1291: # $cmd - The command that got us here.
1292: # $tail - Tail of the command (remaining parameters).
1293: # $client - File descriptor connected to client.
1294: # Returns
1295: # 0 - Requested to exit, caller should shut down.
1296: # 1 - Continue processing.
1297: #
1298: sub PutUserProfileEntry {
1.178.2.4 albertel 1299: my $cmd = shift;
1300: my $tail = shift;
1301: my $client = shift;
1302: my $userinput = "$cmd:$tail";
1303:
1304: my ($udom,$uname,$namespace,$what) =split(/:/,$tail);
1305: $namespace=~s/\//\_/g;
1306: $namespace=~s/\W//g;
1307: if ($namespace ne 'roles') {
1308: chomp($what);
1309: my $proname=propath($udom,$uname);
1310: my $now=time;
1311: unless ($namespace=~/^nohist\_/) {
1312: my $hfh;
1313: if ($hfh=IO::File->new(">>$proname/$namespace.hist")) {
1314: print $hfh "P:$now:$what\n";
1315: }
1316: }
1317: my @pairs=split(/\&/,$what);
1318: my %hash;
1319: if (tie(%hash,'GDBM_File',"$proname/$namespace.db",
1320: &GDBM_WRCREAT(),0640)) {
1321: foreach my $pair (@pairs) {
1322: my ($key,$value)=split(/=/,$pair);
1323: $hash{$key}=$value;
1324: }
1325: if (untie(%hash)) {
1326: Reply( $client, "ok\n", $userinput);
1327: } else {
1328: Failure($client, "error: ".($!+0)." untie(GDBM) failed ".
1329: "while attempting put\n",
1330: $userinput);
1331: }
1332: } else {
1333: Failure( $client, "error: ".($!)." tie(GDBM) Failed ".
1334: "while attempting put\n", $userinput);
1335: }
1336: } else {
1337: Failure( $client, "refused\n", $userinput);
1338: }
1.178.2.1 foxr 1339:
1.178.2.4 albertel 1340: return 1;
1.178.2.1 foxr 1341: }
1342: RegisterHandler("put", \&PutUserProfileEntry, 0, 1, 0);
1343:
1344: #
1345: # Increment a profile entry in the user history file.
1346: # The history contains keyword value pairs. In this case,
1347: # The value itself is a pair of numbers. The first, the current value
1348: # the second an increment that this function applies to the current
1349: # value.
1350: #
1351: # Parameters:
1352: # $cmd - The command that got us here.
1353: # $tail - Tail of the command (remaining parameters).
1354: # $client - File descriptor connected to client.
1355: # Returns
1356: # 0 - Requested to exit, caller should shut down.
1357: # 1 - Continue processing.
1358: #
1359: sub IncrementUserValueHandler {
1.178.2.4 albertel 1360: my $cmd = shift;
1361: my $tail = shift;
1362: my $client = shift;
1363: my $userinput = shift;
1364:
1365: my ($udom,$uname,$namespace,$what) =split(/:/,$tail);
1366: $namespace=~s/\//\_/g;
1367: $namespace=~s/\W//g;
1368: if ($namespace ne 'roles') {
1369: chomp($what);
1370: my $proname=propath($udom,$uname);
1371: my $now=time;
1372: unless ($namespace=~/^nohist\_/) {
1373: my $hfh;
1374: if ($hfh=IO::File->new(">>$proname/$namespace.hist")) {
1375: print $hfh "P:$now:$what\n";
1376: }
1377: }
1378: my @pairs=split(/\&/,$what);
1379: my %hash;
1380: if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),
1381: 0640)) {
1382: foreach my $pair (@pairs) {
1383: my ($key,$value)=split(/=/,$pair);
1384: # We could check that we have a number...
1385: if (! defined($value) || $value eq '') {
1386: $value = 1;
1387: }
1388: $hash{$key}+=$value;
1389: }
1390: if (untie(%hash)) {
1391: Reply( $client, "ok\n", $userinput);
1392: } else {
1393: Failure($client, "error: ".($!+0)." untie(GDBM) failed ".
1394: "while attempting put\n", $userinput);
1395: }
1396: } else {
1397: Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
1398: "while attempting put\n", $userinput);
1399: }
1400: } else {
1401: Failure($client, "refused\n", $userinput);
1402: }
1.178.2.1 foxr 1403:
1.178.2.4 albertel 1404: return 1;
1.178.2.1 foxr 1405: }
1406: RegisterHandler("inc", \&IncrementUserValueHandler, 0, 1, 0);
1407: #
1408: # Put a new role for a user. Roles are LonCAPA's packaging of permissions.
1409: # Each 'role' a user has implies a set of permissions. Adding a new role
1410: # for a person grants the permissions packaged with that role
1411: # to that user when the role is selected.
1412: #
1413: # Parameters:
1414: # $cmd - The command string (rolesput).
1415: # $tail - The remainder of the request line. For rolesput this
1416: # consists of a colon separated list that contains:
1417: # The domain and user that is granting the role (logged).
1418: # The domain and user that is getting the role.
1419: # The roles being granted as a set of & separated pairs.
1420: # each pair a key value pair.
1421: # $client - File descriptor connected to the client.
1422: # Returns:
1423: # 0 - If the daemon should exit
1424: # 1 - To continue processing.
1425: #
1426: #
1427: sub RolesPutHandler {
1.178.2.4 albertel 1428: my $cmd = shift;
1429: my $tail = shift;
1430: my $client = shift;
1431: my $userinput = "$cmd:$tail";
1432:
1433: my ($exedom,$exeuser,$udom,$uname,$what) =split(/:/,$tail);
1434: &Debug("cmd = ".$cmd." exedom= ".$exedom."user = ".$exeuser." udom=".$udom.
1435: "what = ".$what);
1436: my $namespace='roles';
1437: chomp($what);
1438: my $proname=propath($udom,$uname);
1439: my $now=time;
1440: #
1441: # Log the attempt to set a role. The {}'s here ensure that the file
1442: # handle is open for the minimal amount of time. Since the flush
1443: # is done on close this improves the chances the log will be an un-
1444: # corrupted ordered thing.
1445: {
1446: my $hfh;
1447: if ($hfh=IO::File->new(">>$proname/$namespace.hist")) {
1448: print $hfh "P:$now:$exedom:$exeuser:$what\n";
1449: }
1450: }
1451: my @pairs=split(/\&/,$what);
1452: my %hash;
1453: if (tie(%hash,'GDBM_File',"$proname/$namespace.db", &GDBM_WRCREAT(),0640)) {
1454: foreach my $pair (@pairs) {
1455: my ($key,$value)=split(/=/,$pair);
1.178.2.1 foxr 1456: &ManagePermissions($key, $udom, $uname,
1457: &GetAuthType( $udom, $uname));
1458: $hash{$key}=$value;
1.178.2.4 albertel 1459: }
1460: if (untie(%hash)) {
1461: Reply($client, "ok\n", $userinput);
1462: } else {
1463: Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ".
1464: "while attempting rolesput\n", $userinput);
1465: }
1466: } else {
1467: Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
1468: "while attempting rolesput\n", $userinput);
1469: }
1470: return 1;
1.178.2.1 foxr 1471: }
1472: RegisterHandler("rolesput", \&RolesPutHandler, 1,1,0); # Encoded client only.
1473: #
1474: # Deletes (removes) a role for a user. This is equivalent to removing
1475: # a permissions package associated with the role from the user's profile.
1476: #
1477: # Parameters:
1478: # $cmd - The command (rolesdel)
1479: # $tail - The remainder of the request line. This consists
1480: # of:
1481: # The domain and user requesting the change (logged)
1482: # The domain and user being changed.
1483: # The roles being revoked. These are shipped to us
1484: # as a bunch of & separated role name keywords.
1485: # $client - The file handle open on the client.
1486: # Returns:
1487: # 1 - Continue processing
1488: # 0 - Exit.
1489: #
1490: sub RolesDeleteHandler {
1.178.2.4 albertel 1491: my $cmd = shift;
1492: my $tail = shift;
1493: my $client = shift;
1494: my $userinput = "$cmd:$tail";
1495:
1496: my ($exedom,$exeuser,$udom,$uname,$what)=split(/:/,$tail);
1497: &Debug("cmd = ".$cmd." exedom= ".$exedom."user = ".$exeuser." udom=".$udom.
1498: "what = ".$what);
1499: my $namespace='roles';
1500: chomp($what);
1501: my $proname=propath($udom,$uname);
1502: my $now=time;
1503: #
1504: # Log the attempt. This {}'ing is done to ensure that the
1505: # logfile is flushed and closed as quickly as possible. Hopefully
1506: # this preserves both time ordering and reduces the probability that
1507: # messages will be interleaved.
1508: #
1509: {
1510: my $hfh;
1511: if ($hfh=IO::File->new(">>$proname/$namespace.hist")) {
1512: print $hfh "D:$now:$exedom:$exeuser:$what\n";
1513: }
1514: }
1515: my @rolekeys=split(/\&/,$what);
1516: my %hash;
1517: if (tie(%hash,'GDBM_File',"$proname/$namespace.db", &GDBM_WRCREAT(),0640)) {
1518: foreach my $key (@rolekeys) {
1519: delete $hash{$key};
1520: }
1521: if (untie(%hash)) {
1522: Reply($client, "ok\n", $userinput);
1523: } else {
1524: Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ".
1525: "while attempting rolesdel\n", $userinput);
1526: }
1527: } else {
1528: Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
1529: "while attempting rolesdel\n", $userinput);
1530: }
1531:
1532: return 1;
1.178.2.1 foxr 1533: }
1534: RegisterHandler("rolesdel", \&RolesDeleteHandler, 1,1, 0); # Encoded client only
1535:
1536: # Unencrypted get from a user's profile database. See
1537: # GetProfileEntryEncrypted for a version that does end-to-end encryption.
1538: # This function retrieves a keyed item from a specific named database in the
1539: # user's directory.
1540: #
1541: # Parameters:
1542: # $cmd - Command request keyword (get).
1543: # $tail - Tail of the command. This is a colon separated list
1544: # consisting of the domain and username that uniquely
1545: # identifies the profile,
1546: # The 'namespace' which selects the gdbm file to
1547: # do the lookup in,
1548: # & separated list of keys to lookup. Note that
1549: # the values are returned as an & separated list too.
1550: # $client - File descriptor open on the client.
1551: # Returns:
1552: # 1 - Continue processing.
1553: # 0 - Exit.
1554: #
1555: sub GetProfileEntry {
1.178.2.4 albertel 1556: my $cmd = shift;
1557: my $tail = shift;
1558: my $client = shift;
1559: my $userinput= "$cmd:$tail";
1560:
1561: my ($udom,$uname,$namespace,$what) = split(/:/,$tail);
1562: $namespace=~s/\//\_/g;
1563: $namespace=~s/\W//g;
1564: chomp($what);
1565: my @queries=split(/\&/,$what);
1566: my $proname=propath($udom,$uname);
1567: my $qresult='';
1568: my %hash;
1569: if (tie(%hash,'GDBM_File',"$proname/$namespace.db", &GDBM_READER(),0640)) {
1570: for (my $i=0;$i<=$#queries;$i++) {
1571: $qresult.="$hash{$queries[$i]}&"; # Presumably failure gives empty string.
1572: }
1573: if (untie(%hash)) {
1574: $qresult=~s/\&$//; # Remove trailing & from last lookup.
1575: Reply($client, "$qresult\n", $userinput);
1576: } else {
1577: Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
1578: "while attempting get\n", $userinput);
1579: }
1580: } else {
1581: if ($!+0 == 2) { # +0 coerces errno -> number 2 is ENOENT
1582: Failure($client, "error:No such file or ".
1583: "GDBM reported bad block error\n", $userinput);
1584: } else { # Some other undifferentiated err.
1585: Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
1586: "while attempting get\n", $userinput);
1587: }
1588: }
1589: return 1;
1.178.2.1 foxr 1590: }
1591: RegisterHandler("get", \&GetProfileEntry, 0,1,0);
1592: #
1593: # Process the encrypted get request. Note that the request is sent
1594: # in clear, but the reply is encrypted. This is a small covert channel:
1595: # information about the sensitive keys is given to the snooper. Just not
1596: # information about the values of the sensitive key. Hmm if I wanted to
1597: # know these I'd snoop for the egets. Get the profile item names from them
1598: # and then issue a get for them since there's no enforcement of the
1599: # requirement of an encrypted get for particular profile items. If I
1600: # were re-doing this, I'd force the request to be encrypted as well as the
1601: # reply. I'd also just enforce encrypted transactions for all gets since
1602: # that would prevent any covert channel snooping.
1603: #
1604: # Parameters:
1605: # $cmd - Command keyword of request (eget).
1606: # $tail - Tail of the command. See GetProfileEntry
# for more information about this.
1607: # $client - File open on the client.
1608: # Returns:
1609: # 1 - Continue processing
1610: # 0 - server should exit.
1611: sub GetProfileEntryEncrypted {
1.178.2.4 albertel 1612: my $cmd = shift;
1613: my $tail = shift;
1614: my $client = shift;
1615: my $userinput = "$cmd:$tail";
1616:
1617: my ($cmd,$udom,$uname,$namespace,$what) = split(/:/,$userinput);
1618: $namespace=~s/\//\_/g;
1619: $namespace=~s/\W//g;
1620: chomp($what);
1621: my @queries=split(/\&/,$what);
1622: my $proname=propath($udom,$uname);
1623: my $qresult='';
1624: my %hash;
1625: if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) {
1626: for (my $i=0;$i<=$#queries;$i++) {
1627: $qresult.="$hash{$queries[$i]}&";
1628: }
1629: if (untie(%hash)) {
1630: $qresult=~s/\&$//;
1631: if ($cipher) {
1632: my $cmdlength=length($qresult);
1633: $qresult.=" ";
1634: my $encqresult='';
1635: for(my $encidx=0;$encidx<=$cmdlength;$encidx+=8) {
1636: $encqresult.= unpack("H16", $cipher->encrypt(substr($qresult,
1637: $encidx,
1638: 8)));
1639: }
1640: Reply( $client, "enc:$cmdlength:$encqresult\n", $userinput);
1641: } else {
1642: Failure( $client, "error:no_key\n", $userinput);
1643: }
1644: } else {
1645: Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
1646: "while attempting eget\n", $userinput);
1647: }
1648: } else {
1649: Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
1650: "while attempting eget\n", $userinput);
1651: }
1652:
1653: return 1;
1.178.2.1 foxr 1654: }
1655: RegisterHandler("eget", \&GetProfileEncrypted, 0, 1, 0);
1656:
1657: #
1658: # Deletes a key in a user profile database.
1659: #
1660: # Parameters:
1661: # $cmd - Command keyword (del).
1662: # $tail - Command tail. IN this case a colon
1663: # separated list containing:
1664: # The domain and user that identifies uniquely
1665: # the identity of the user.
1666: # The profile namespace (name of the profile
1667: # database file).
1668: # & separated list of keywords to delete.
1669: # $client - File open on client socket.
1670: # Returns:
1671: # 1 - Continue processing
1672: # 0 - Exit server.
1673: #
1674: #
1.178.2.6! foxr 1675:
! 1676: sub DeleteProfileEntry {
1.178.2.4 albertel 1677: my $cmd = shift;
1678: my $tail = shift;
1679: my $client = shift;
1680: my $userinput = "cmd:$tail";
1681:
1682: my ($udom,$uname,$namespace,$what) = split(/:/,$tail);
1683: $namespace=~s/\//\_/g;
1684: $namespace=~s/\W//g;
1685: chomp($what);
1686: my $proname=propath($udom,$uname);
1687: my $now=time;
1688: unless ($namespace=~/^nohist\_/) {
1689: my $hfh;
1690: if ($hfh=IO::File->new(">>$proname/$namespace.hist")) {
1691: print $hfh "D:$now:$what\n";
1692: }
1693: }
1694: my @keys=split(/\&/,$what);
1695: my %hash;
1696: if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) {
1697: foreach my $key (@keys) {
1698: delete($hash{$key});
1699: }
1700: if (untie(%hash)) {
1701: Reply($client, "ok\n", $userinput);
1702: } else {
1703: Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
1704: "while attempting del\n", $userinput);
1705: }
1706: } else {
1707: Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
1708: "while attempting del\n", $userinput);
1709: }
1710: return 1;
1.178.2.1 foxr 1711: }
1712: RegisterHandler("del", \&DeleteProfileEntry, 0, 1, 0);
1713: #
1714: # List the set of keys that are defined in a profile database file.
1715: # A successful reply from this will contain an & separated list of
1716: # the keys.
1717: # Parameters:
1718: # $cmd - Command request (keys).
1719: # $tail - Remainder of the request, a colon separated
1720: # list containing domain/user that identifies the
1721: # user being queried, and the database namespace
1722: # (database filename essentially).
1723: # $client - File open on the client.
1724: # Returns:
1725: # 1 - Continue processing.
1726: # 0 - Exit the server.
1727: #
1728: sub GetProfileKeys {
1.178.2.4 albertel 1729: my $cmd = shift;
1730: my $tail = shift;
1731: my $client = shift;
1732: my $userinput = "$cmd:$tail";
1733:
1734: my ($udom,$uname,$namespace)=split(/:/,$tail);
1735: $namespace=~s/\//\_/g;
1736: $namespace=~s/\W//g;
1737: my $proname=propath($udom,$uname);
1738: my $qresult='';
1739: my %hash;
1740: if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) {
1741: foreach my $key (keys %hash) {
1742: $qresult.="$key&";
1743: }
1744: if (untie(%hash)) {
1745: $qresult=~s/\&$//;
1746: Reply($client, "$qresult\n", $userinput);
1747: } else {
1748: Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
1749: "while attempting keys\n", $userinput);
1750: }
1751: } else {
1752: Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
1753: "while attempting keys\n", $userinput);
1754: }
1.178.2.1 foxr 1755:
1.178.2.4 albertel 1756: return 1;
1.178.2.1 foxr 1757: }
1758: RegisterHandler("keys", \&GetProfileKeys, 0, 1, 0);
1759: #
1760: # Dump the contents of a user profile database.
1761: # Note that this constitutes a very large covert channel too since
1762: # the dump will return sensitive information that is not encrypted.
1763: # The naive security assumption is that the session negotiation ensures
1764: # our client is trusted and I don't believe that's assured at present.
1765: # Sure want badly to go to ssl or tls. Of course if my peer isn't really
1766: # a LonCAPA node they could have negotiated an encryption key too so >sigh<.
1767: #
1768: # Parameters:
1769: # $cmd - The command request keyword (currentdump).
1770: # $tail - Remainder of the request, consisting of a colon
1771: # separated list that has the domain/username and
1772: # the namespace to dump (database file).
1773: # $client - file open on the remote client.
1774: # Returns:
1775: # 1 - Continue processing.
1776: # 0 - Exit the server.
1777: #
1778: sub DumpProfileDatabase {
1.178.2.4 albertel 1779: my $cmd = shift;
1780: my $tail = shift;
1781: my $client = shift;
1782: my $userinput = "$cmd:$tail";
1783:
1784: my ($udom,$uname,$namespace) = split(/:/,$tail);
1785: $namespace=~s/\//\_/g;
1786: $namespace=~s/\W//g;
1787: my $qresult='';
1788: my $proname=propath($udom,$uname);
1789: my %hash;
1790: if (tie(%hash,'GDBM_File',"$proname/$namespace.db", &GDBM_READER(),0640)) {
1791: # Structure of %data:
1792: # $data{$symb}->{$parameter}=$value;
1793: # $data{$symb}->{'v.'.$parameter}=$version;
1794: # since $parameter will be unescaped, we do not
1795: # have to worry about silly parameter names...
1796: my %data = (); # A hash of anonymous hashes..
1797: while (my ($key,$value) = each(%hash)) {
1798: my ($v,$symb,$param) = split(/:/,$key);
1799: next if ($v eq 'version' || $symb eq 'keys');
1800: next if (exists($data{$symb}) &&
1801: exists($data{$symb}->{$param}) &&
1802: $data{$symb}->{'v.'.$param} > $v);
1803: $data{$symb}->{$param}=$value;
1804: $data{$symb}->{'v.'.$param}=$v;
1805: }
1806: if (untie(%hash)) {
1807: while (my ($symb,$param_hash) = each(%data)) {
1808: while(my ($param,$value) = each (%$param_hash)){
1809: next if ($param =~ /^v\./); # Ignore versions...
1810: #
1811: # Just dump the symb=value pairs separated by &
1812: #
1813: $qresult.=$symb.':'.$param.'='.$value.'&';
1814: }
1815: }
1816: chop($qresult);
1817: Reply($client , "$qresult\n", $userinput);
1818: } else {
1819: Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ".
1820: "while attempting currentdump\n", $userinput);
1821: }
1822: } else {
1823: Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
1824: "while attempting currentdump\n", $userinput);
1825: }
1.178.2.1 foxr 1826:
1.178.2.4 albertel 1827: return 1;
1.178.2.1 foxr 1828: }
1829: RegisterHandler("currentdump", \&DumpProfileDatabase, 0, 1, 0);
1830: #
1831: # Dump a profile database with an optional regular expression
1832: # to match against the keys. In this dump, no effort is made
1833: # to separate symb from version information. Presumably the
1834: # databases that are dumped by this command are of a different
1835: # structure. Need to look at this and improve the documentation of
1836: # both this and the currentdump handler.
1837: # Parameters:
1838: # $cmd - The command keyword.
1839: # $tail - All of the characters after the $cmd:
1840: # These are expected to be a colon
1841: # separated list containing:
1842: # domain/user - identifying the user.
1843: # namespace - identifying the database.
1844: # regexp - optional regular expression
1845: # that is matched against
1846: # database keywords to do
1847: # selective dumps.
1848: # $client - Channel open on the client.
1849: # Returns:
1850: # 1 - Continue processing.
1851: # Side effects:
1852: # response is written to $client.
1853: #
1854: sub DumpWithRegexp {
1.178.2.4 albertel 1855: my $cmd = shift;
1856: my $tail = shift;
1857: my $client = shift;
1858:
1859: my $userinput = "$cmd:$tail";
1860:
1861: my ($udom,$uname,$namespace,$regexp)=split(/:/,$tail);
1862: $namespace=~s/\//\_/g;
1863: $namespace=~s/\W//g;
1864: if (defined($regexp)) {
1865: $regexp=&unescape($regexp);
1866: } else {
1867: $regexp='.';
1868: }
1869: my $qresult='';
1870: my $proname=propath($udom,$uname);
1871: my %hash;
1872: if (tie(%hash,'GDBM_File',"$proname/$namespace.db",
1873: &GDBM_READER(),0640)) {
1874: while (my ($key,$value) = each(%hash)) {
1875: if ($regexp eq '.') {
1876: $qresult.=$key.'='.$value.'&';
1877: } else {
1878: my $unescapeKey = &unescape($key);
1879: if (eval('$unescapeKey=~/$regexp/')) {
1880: $qresult.="$key=$value&";
1881: }
1882: }
1883: }
1884: if (untie(%hash)) {
1885: chop($qresult);
1886: Reply($client, "$qresult\n", $userinput);
1887: } else {
1888: Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ".
1889: "while attempting dump\n", $userinput);
1890: }
1891: } else {
1892: Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
1893: "while attempting dump\n", $userinput);
1894: }
1.178.2.1 foxr 1895:
1896: return 1;
1897: }
1898: RegisterHandler("dump", \&DumpWithRegexp, 0, 1, 0);
1899:
1900: # Store an aitem in any database but the roles database.
1901: #
1902: # Parameters:
1903: # $cmd - Request command keyword.
1904: # $tail - Tail of the request. This is a colon
1905: # separated list containing:
1906: # domain/user - User and authentication domain.
1907: # namespace - Name of the database being modified
1908: # rid - Resource keyword to modify.
1909: # what - new value associated with rid.
1910: #
1911: # $client - Socket open on the client.
1912: #
1913: #
1914: # Returns:
1915: # 1 (keep on processing).
1916: # Side-Effects:
1917: # Writes to the client
1918: sub StoreHandler {
1.178.2.4 albertel 1919: my $cmd = shift;
1920: my $tail = shift;
1921: my $client = shift;
1.178.2.1 foxr 1922:
1.178.2.4 albertel 1923: my $userinput = "$cmd:$tail";
1.178.2.1 foxr 1924:
1.178.2.4 albertel 1925: my ($udom,$uname,$namespace,$rid,$what) =split(/:/,$tail);
1926: $namespace=~s/\//\_/g;
1927: $namespace=~s/\W//g;
1928: if ($namespace ne 'roles') {
1929: chomp($what);
1930: my $proname=propath($udom,$uname);
1931: my $now=time;
1932: unless ($namespace=~/^nohist\_/) {
1933: my $hfh;
1934: if ($hfh=IO::File->new(">>$proname/$namespace.hist")) {
1935: print $hfh "P:$now:$rid:$what\n";
1936: }
1937: }
1938: my @pairs=split(/\&/,$what);
1939: my %hash;
1940: if (tie(%hash,'GDBM_File',"$proname/$namespace.db",
1941: &GDBM_WRCREAT(),0640)) {
1942: my @previouskeys=split(/&/,$hash{"keys:$rid"});
1943: my $key;
1944: $hash{"version:$rid"}++;
1945: my $version=$hash{"version:$rid"};
1946: my $allkeys='';
1947: foreach my $pair (@pairs) {
1948: my ($key,$value)=split(/=/,$pair);
1949: $allkeys.=$key.':';
1950: $hash{"$version:$rid:$key"}=$value;
1951: }
1952: $hash{"$version:$rid:timestamp"}=$now;
1953: $allkeys.='timestamp';
1954: $hash{"$version:keys:$rid"}=$allkeys;
1955: if (untie(%hash)) {
1956: Reply($client, "ok\n", $userinput);
1957: } else {
1958: Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
1959: "while attempting store\n", $userinput);
1960: }
1961: } else {
1962: Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
1963: "while attempting store\n", $userinput);
1964: }
1965: } else {
1966: Failure($client, "refused\n", $userinput);
1.178.2.1 foxr 1967: }
1968:
1.178.2.4 albertel 1969: return 1;
1.178.2.1 foxr 1970: }
1971: RegisterHandler("store", \&StoreHandler, 0, 1, 0);
1972: #
1973: # Restore a prior version of a resource.
1974: #
1975: # Parameters:
1976: # $cmd - Command keyword.
1977: # $tail - Remainder of the request which consists of:
1978: # domain/user - User and auth. domain.
1979: # namespace - name of resource database.
1980: # rid - Resource id.
1981: # $client - socket open on the client.
1982: #
1983: # Returns:
1984: # 1 indicating the caller should not yet exit.
1985: # Side-effects:
1986: # Writes a reply to the client.
1987: #
1988: sub RestoreHandler {
1.178.2.4 albertel 1989: my $cmd = shift;
1990: my $tail = shift;
1991: my $client = shift;
1992:
1993: my $userinput = "$cmd:$tail"; # Only used for logging purposes.
1994:
1995: my ($cmd,$udom,$uname,$namespace,$rid) = split(/:/,$userinput);
1996: $namespace=~s/\//\_/g;
1997: $namespace=~s/\W//g;
1998: chomp($rid);
1999: my $proname=propath($udom,$uname);
2000: my $qresult='';
2001: my %hash;
2002: if (tie(%hash,'GDBM_File',"$proname/$namespace.db",
2003: &GDBM_READER(),0640)) {
2004: my $version=$hash{"version:$rid"};
2005: $qresult.="version=$version&";
2006: my $scope;
2007: for ($scope=1;$scope<=$version;$scope++) {
2008: my $vkeys=$hash{"$scope:keys:$rid"};
2009: my @keys=split(/:/,$vkeys);
2010: my $key;
2011: $qresult.="$scope:keys=$vkeys&";
2012: foreach $key (@keys) {
2013: $qresult.="$scope:$key=".$hash{"$scope:$rid:$key"}."&";
2014: }
2015: }
2016: if (untie(%hash)) {
2017: $qresult=~s/\&$//;
2018: Reply( $client, "$qresult\n", $userinput);
2019: } else {
2020: Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
2021: "while attempting restore\n", $userinput);
2022: }
2023: } else {
2024: Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
2025: "while attempting restore\n", $userinput);
2026: }
1.178.2.1 foxr 2027:
1.178.2.4 albertel 2028: return 1;
1.178.2.1 foxr 2029:
2030:
2031: }
1.178.2.6! foxr 2032: RegisterHandler("restore", \&RestoreHandler, 0,1,0);
1.178.2.1 foxr 2033:
2034: #
2035: # Add a chat message to to a discussion board.
2036: #
2037: # Parameters:
2038: # $cmd - Request keyword.
2039: # $tail - Tail of the command. A colon separated list
2040: # containing:
2041: # cdom - Domain on which the chat board lives
2042: # cnum - Identifier of the discussion group.
2043: # post - Body of the posting.
2044: # $client - Socket open on the client.
2045: # Returns:
2046: # 1 - Indicating caller should keep on processing.
2047: #
2048: # Side-effects:
2049: # writes a reply to the client.
2050: #
2051: #
2052: sub SendChatHandler {
1.178.2.4 albertel 2053: my $cmd = shift;
2054: my $tail = shift;
2055: my $client = shift;
2056:
2057: my $userinput = "$cmd:$tail";
1.178.2.1 foxr 2058:
1.178.2.4 albertel 2059: my ($cdom,$cnum,$newpost)=split(/\:/,$tail);
2060: &chatadd($cdom,$cnum,$newpost);
2061: Reply($client, "ok\n", $userinput);
1.178.2.1 foxr 2062:
1.178.2.4 albertel 2063: return 1;
1.178.2.1 foxr 2064: }
2065: RegisterHandler("chatsend", \&SendChatHandler, 0, 1, 0);
2066: #
2067: # Retrieve the set of chat messagss from a discussion board.
2068: #
2069: # Parameters:
2070: # $cmd - Command keyword that initiated the request.
2071: # $tail - Remainder of the request after the command
2072: # keyword. In this case a colon separated list of
2073: # chat domain - Which discussion board.
2074: # chat id - Discussion thread(?)
2075: # domain/user - Authentication domain and username
2076: # of the requesting person.
2077: # $client - Socket open on the client program.
2078: # Returns:
2079: # 1 - continue processing
2080: # Side effects:
2081: # Response is written to the client.
2082: #
2083: sub RetrieveChatHandler {
1.178.2.4 albertel 2084: my $cmd = shift;
2085: my $tail = shift;
2086: my $client = shift;
2087:
2088: my $userinput = "$cmd:$tail";
2089:
2090: my ($cdom,$cnum,$udom,$uname)=split(/\:/,$tail);
2091: my $reply='';
2092: foreach (&getchat($cdom,$cnum,$udom,$uname)) {
2093: $reply.=&escape($_).':';
2094: }
2095: $reply=~s/\:$//;
2096: Reply($client, $reply."\n", $userinput);
1.178.2.1 foxr 2097:
2098:
1.178.2.4 albertel 2099: return 1;
1.178.2.1 foxr 2100: }
2101: RegisterHandler("chatretr", \&RetrieveChatHandler, 0, 1, 0);
2102: #
2103: # Initiate a query of an sql database. SQL query repsonses get put in
2104: # a file for later retrieval. This prevents sql query results from
2105: # bottlenecking the system. Note that with loncnew, perhaps this is
2106: # less of an issue since multiple outstanding requests can be concurrently
2107: # serviced.
2108: #
2109: # Parameters:
2110: # $cmd - COmmand keyword that initiated the request.
2111: # $tail - Remainder of the command after the keyword.
2112: # For this function, this consists of a query and
2113: # 3 arguments that are self-documentingly labelled
2114: # in the original arg1, arg2, arg3.
2115: # $client - Socket open on the client.
2116: # Return:
2117: # 1 - Indicating processing should continue.
2118: # Side-effects:
2119: # a reply is written to $client.
2120: #
2121: sub SendQueryHandler {
1.178.2.4 albertel 2122: my $cmd = shift;
2123: my $tail = shift;
2124: my $client = shift;
2125:
2126: my $userinput = "$cmd:$tail";
2127:
2128: my ($query,$arg1,$arg2,$arg3)=split(/\:/,$tail);
2129: $query=~s/\n*$//g;
2130: Reply($client, "". sqlreply("$clientname\&$query".
2131: "\&$arg1"."\&$arg2"."\&$arg3")."\n",
2132: $userinput);
2133:
2134: return 1;
1.178.2.1 foxr 2135: }
2136: RegisterHandler("querysend", \&SendQueryHandler, 0, 1, 0);
2137:
2138: #
2139: # Add a reply to an sql query. SQL queries are done asyncrhonously.
2140: # The query is submitted via a "querysend" transaction.
2141: # There it is passed on to the lonsql daemon, queued and issued to
2142: # mysql.
2143: # This transaction is invoked when the sql transaction is complete
2144: # it stores the query results in flie and indicates query completion.
2145: # presumably local software then fetches this response... I'm guessing
2146: # the sequence is: lonc does a querysend, we ask lonsql to do it.
2147: # lonsql on completion of the query interacts with the lond of our
2148: # client to do a query reply storing two files:
2149: # - id - The results of the query.
2150: # - id.end - Indicating the transaction completed.
2151: # NOTE: id is a unique id assigned to the query and querysend time.
2152: # Parameters:
2153: # $cmd - Command keyword that initiated this request.
2154: # $tail - Remainder of the tail. In this case that's a colon
2155: # separated list containing the query Id and the
2156: # results of the query.
2157: # $client - Socket open on the client.
2158: # Return:
2159: # 1 - Indicating that we should continue processing.
2160: # Side effects:
2161: # ok written to the client.
2162: #
2163: sub ReplyQueryHandler {
1.178.2.4 albertel 2164: my $cmd = shift;
2165: my $tail = shift;
2166: my $client = shift;
2167:
2168: my $userinput = "$cmd:$tail";
2169:
2170: my ($cmd,$id,$reply)=split(/:/,$userinput);
2171: my $store;
2172: my $execdir=$perlvar{'lonDaemons'};
2173: if ($store=IO::File->new(">$execdir/tmp/$id")) {
2174: $reply=~s/\&/\n/g;
2175: print $store $reply;
2176: close $store;
2177: my $store2=IO::File->new(">$execdir/tmp/$id.end");
2178: print $store2 "done\n";
2179: close $store2;
2180: Reply($client, "ok\n", $userinput);
2181: } else {
2182: Failure($client, "error: ".($!+0)
2183: ." IO::File->new Failed ".
2184: "while attempting queryreply\n", $userinput);
2185: }
1.178.2.1 foxr 2186:
2187:
1.178.2.4 albertel 2188: return 1;
1.178.2.1 foxr 2189: }
2190: RegisterHandler("queryreply", \&ReplyQueryHandler, 0, 1, 0);
2191: #
2192: # Process the courseidput query. Not quite sure what this means
2193: # at the system level sense. It appears a gdbm file in the
2194: # /home/httpd/lonUsers/$domain/nohist_courseids is tied and
2195: # a set of entries made in that database.
2196: #
2197: # Parameters:
2198: # $cmd - The command keyword that initiated this request.
2199: # $tail - Tail of the command. In this case consists of a colon
2200: # separated list contaning the domain to apply this to and
2201: # an ampersand separated list of keyword=value pairs.
2202: # $client - Socket open on the client.
2203: # Returns:
2204: # 1 - indicating that processing should continue
2205: #
2206: # Side effects:
2207: # reply is written to the client.
2208: #
2209: sub PutCourseIdHandler {
1.178.2.4 albertel 2210: my $cmd = shift;
2211: my $tail = shift;
2212: my $client = shift;
1.178.2.1 foxr 2213:
1.178.2.4 albertel 2214: my $userinput = "$cmd:$tail";
2215:
2216: my ($udom,$what)=split(/:/,$tail);
2217: chomp($what);
2218: $udom=~s/\W//g;
2219: my $proname=
2220: "$perlvar{'lonUsersDir'}/$udom/nohist_courseids";
2221: my $now=time;
2222: my @pairs=split(/\&/,$what);
2223: my %hash;
2224: if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_WRCREAT(),0640)) {
2225: foreach my $pair (@pairs) {
2226: my ($key,$value)=split(/=/,$pair);
2227: $hash{$key}=$value.':'.$now;
2228: }
2229: if (untie(%hash)) {
2230: Reply($client, "ok\n", $userinput);
2231: } else {
2232: Failure( $client, "error: ".($!+0)
2233: ." untie(GDBM) Failed ".
2234: "while attempting courseidput\n", $userinput);
2235: }
2236: } else {
2237: Failure( $client, "error: ".($!+0)
2238: ." tie(GDBM) Failed ".
2239: "while attempting courseidput\n", $userinput);
2240: }
2241:
2242: return 1;
1.178.2.1 foxr 2243: }
2244: RegisterHandler("courseidput", \&PutCourseIdHandler, 0, 1, 0);
2245:
2246: # Retrieves the value of a course id resource keyword pattern
2247: # defined since a starting date. Both the starting date and the
2248: # keyword pattern are optional. If the starting date is not supplied it
2249: # is treated as the beginning of time. If the pattern is not found,
2250: # it is treatred as "." matching everything.
2251: #
2252: # Parameters:
2253: # $cmd - Command keyword that resulted in us being dispatched.
2254: # $tail - The remainder of the command that, in this case, consists
2255: # of a colon separated list of:
2256: # domain - The domain in which the course database is
2257: # defined.
2258: # since - Optional parameter describing the minimum
2259: # time of definition(?) of the resources that
2260: # will match the dump.
2261: # description - regular expression that is used to filter
2262: # the dump. Only keywords matching this regexp
2263: # will be used.
2264: # $client - The socket open on the client.
2265: # Returns:
2266: # 1 - Continue processing.
2267: # Side Effects:
2268: # a reply is written to $client.
2269: sub DumpCourseIdHandler {
1.178.2.4 albertel 2270: my $cmd = shift;
2271: my $tail = shift;
2272: my $client = shift;
2273:
2274: my $userinput = "$cmd:$tail";
2275:
2276: my ($udom,$since,$description) =split(/:/,$tail);
2277: if (defined($description)) {
2278: $description=&unescape($description);
2279: } else {
2280: $description='.';
2281: }
2282: unless (defined($since)) { $since=0; }
2283: my $qresult='';
2284: my $proname = "$perlvar{'lonUsersDir'}/$udom/nohist_courseids";
2285: my %hash;
2286: if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_READER(),0640)) {
2287: while (my ($key,$value) = each(%hash)) {
2288: my ($descr,$lasttime)=split(/\:/,$value);
2289: if ($lasttime<$since) {
2290: next;
2291: }
2292: if ($description eq '.') {
2293: $qresult.=$key.'='.$descr.'&';
2294: } else {
2295: my $unescapeVal = &unescape($descr);
2296: if (eval('$unescapeVal=~/$description/i')) {
2297: $qresult.="$key=$descr&";
2298: }
2299: }
2300: }
2301: if (untie(%hash)) {
2302: chop($qresult);
2303: Reply($client, "$qresult\n", $userinput);
2304: } else {
2305: Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
2306: "while attempting courseiddump\n", $userinput);
2307: }
2308: } else {
2309: Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
2310: "while attempting courseiddump\n", $userinput);
2311: }
1.178.2.1 foxr 2312:
2313:
1.178.2.4 albertel 2314: return 1;
1.178.2.1 foxr 2315: }
2316: RegisterHandler("courseiddump", \&DumpCourseIdHandler, 0, 1, 0);
2317: #
2318: # Puts an id to a domains id database.
2319: #
2320: # Parameters:
2321: # $cmd - The command that triggered us.
2322: # $tail - Remainder of the request other than the command. This is a
2323: # colon separated list containing:
2324: # $domain - The domain for which we are writing the id.
2325: # $pairs - The id info to write... this is and & separated list
2326: # of keyword=value.
2327: # $client - Socket open on the client.
2328: # Returns:
2329: # 1 - Continue processing.
2330: # Side effects:
2331: # reply is written to $client.
2332: #
2333: sub PutIdHandler {
1.178.2.4 albertel 2334: my $cmd = shift;
2335: my $tail = shift;
2336: my $client = shift;
2337:
2338: my $userinput = "$cmd:$tail";
2339:
2340: my ($udom,$what)=split(/:/,$tail);
2341: chomp($what);
2342: $udom=~s/\W//g;
2343: my $proname="$perlvar{'lonUsersDir'}/$udom/ids";
2344: my $now=time;
2345: {
2346: my $hfh;
2347: if ($hfh=IO::File->new(">>$proname.hist")) {
2348: print $hfh "P:$now:$what\n";
2349: }
2350: }
2351: my @pairs=split(/\&/,$what);
2352: my %hash;
2353: if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_WRCREAT(),0640)) {
2354: foreach my $pair (@pairs) {
2355: my ($key,$value)=split(/=/,$pair);
2356: $hash{$key}=$value;
2357: }
2358: if (untie(%hash)) {
2359: Reply($client, "ok\n", $userinput);
2360: } else {
2361: Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
2362: "while attempting idput\n", $userinput);
2363: }
2364: } else {
2365: Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
2366: "while attempting idput\n", $userinput);
1.178.2.1 foxr 2367: }
2368:
1.178.2.4 albertel 2369: return 1;
1.178.2.1 foxr 2370: }
2371:
2372: RegisterHandler("idput", \&PutIdHandler, 0, 1, 0);
2373: #
2374: # Retrieves a set of id values from the id database.
2375: # Returns an & separated list of results, one for each requested id to the
2376: # client.
2377: #
2378: # Parameters:
2379: # $cmd - Command keyword that caused us to be dispatched.
2380: # $tail - Tail of the command. Consists of a colon separated:
2381: # domain - the domain whose id table we dump
2382: # ids Consists of an & separated list of
2383: # id keywords whose values will be fetched.
2384: # nonexisting keywords will have an empty value.
2385: # $client - Socket open on the client.
2386: #
2387: # Returns:
2388: # 1 - indicating processing should continue.
2389: # Side effects:
2390: # An & separated list of results is written to $client.
2391: #
2392: sub GetIdHandler {
1.178.2.4 albertel 2393: my $cmd = shift;
2394: my $tail = shift;
2395: my $client = shift;
2396:
2397: my $userinput = "$client:$tail";
2398:
2399: my ($udom,$what)=split(/:/,$tail);
2400: chomp($what);
2401: $udom=~s/\W//g;
2402: my $proname="$perlvar{'lonUsersDir'}/$udom/ids";
2403: my @queries=split(/\&/,$what);
2404: my $qresult='';
2405: my %hash;
2406: if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_READER(),0640)) {
2407: for (my $i=0;$i<=$#queries;$i++) {
2408: $qresult.="$hash{$queries[$i]}&";
2409: }
2410: if (untie(%hash)) {
2411: $qresult=~s/\&$//;
2412: Reply($client, "$qresult\n", $userinput);
2413: } else {
2414: Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ".
2415: "while attempting idget\n",$userinput);
2416: }
2417: } else {
2418: Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
2419: "while attempting idget\n",$userinput);
2420: }
1.178.2.1 foxr 2421:
1.178.2.4 albertel 2422: return 1;
1.178.2.1 foxr 2423: }
1.178.2.3 foxr 2424:
1.178.2.1 foxr 2425: RegisterHandler("idget", \&GetIdHandler, 0, 1, 0);
1.178.2.3 foxr 2426: #
2427: # Process the tmpput command I'm not sure what this does.. Seems to
2428: # create a file in the lonDaemons/tmp directory of the form $id.tmp
2429: # where Id is the client's ip concatenated with a sequence number.
2430: # The file will contain some value that is passed in. Is this e.g.
2431: # a login token?
2432: #
2433: # Parameters:
2434: # $cmd - The command that got us dispatched.
2435: # $tail - The remainder of the request following $cmd:
2436: # In this case this will be the contents of the file.
2437: # $client - Socket connected to the client.
2438: # Returns:
2439: # 1 indicating processing can continue.
2440: # Side effects:
2441: # A file is created in the local filesystem.
2442: # A reply is sent to the client.
2443: sub TmpPutHandler {
1.178.2.4 albertel 2444: my $cmd = shift;
2445: my $what = shift;
2446: my $client = shift;
2447:
2448: my $userinput = "$cmd:$what"; # Reconstruct for logging.
2449:
2450:
2451: my $store;
2452: $tmpsnum++;
2453: my $id=$$.'_'.$clientip.'_'.$tmpsnum;
2454: $id=~s/\W/\_/g;
2455: $what=~s/\n//g;
2456: my $execdir=$perlvar{'lonDaemons'};
2457: if ($store=IO::File->new(">$execdir/tmp/$id.tmp")) {
2458: print $store $what;
2459: close $store;
2460: Reply($client, "$id\n", $userinput);
2461: } else {
2462: Failure( $client, "error: ".($!+0)."IO::File->new Failed ".
2463: "while attempting tmpput\n", $userinput);
2464: }
2465: return 1;
1.178.2.3 foxr 2466:
2467: }
2468: RegisterHandler("tmpput", \&TmpPutHandler, 0, 1, 0);
2469:
2470: # Processes the tmpget command. This command returns the contents
2471: # of a temporary resource file(?) created via tmpput.
2472: #
2473: # Paramters:
2474: # $cmd - Command that got us dispatched.
2475: # $id - Tail of the command, contain the id of the resource
2476: # we want to fetch.
2477: # $client - socket open on the client.
2478: # Return:
2479: # 1 - Inidcating processing can continue.
2480: # Side effects:
2481: # A reply is sent to the client.
2482:
2483: #
2484: sub TmpGetHandler {
1.178.2.4 albertel 2485: my $cmd = shift;
2486: my $id = shift;
2487: my $client = shift;
2488: my $userinput = "$cmd:$id";
2489:
2490: chomp($id);
2491: $id=~s/\W/\_/g;
2492: my $store;
2493: my $execdir=$perlvar{'lonDaemons'};
2494: if ($store=IO::File->new("$execdir/tmp/$id.tmp")) {
2495: my $reply=<$store>;
2496: Reply( $client, "$reply\n", $userinput);
2497: close $store;
2498: } else {
2499: Failure( $client, "error: ".($!+0)."IO::File->new Failed ".
2500: "while attempting tmpget\n", $userinput);
2501: }
1.178.2.3 foxr 2502:
1.178.2.4 albertel 2503: return 1;
1.178.2.3 foxr 2504: }
2505: RegisterHandler("tmpget", \&TmpGetHandler, 0, 1, 0);
2506: #
2507: # Process the tmpdel command. This command deletes a temp resource
2508: # created by the tmpput command.
2509: #
2510: # Parameters:
2511: # $cmd - Command that got us here.
2512: # $id - Id of the temporary resource created.
2513: # $client - socket open on the client process.
2514: #
2515: # Returns:
2516: # 1 - Indicating processing should continue.
2517: # Side Effects:
2518: # A file is deleted
2519: # A reply is sent to the client.
2520: sub TmpDelHandler {
1.178.2.4 albertel 2521: my $cmd = shift;
2522: my $id = shift;
2523: my $client = shift;
2524:
2525: my $userinput= "$cmd:$id";
1.178.2.3 foxr 2526:
1.178.2.4 albertel 2527: chomp($id);
2528: $id=~s/\W/\_/g;
2529: my $execdir=$perlvar{'lonDaemons'};
2530: if (unlink("$execdir/tmp/$id.tmp")) {
2531: Reply($client, "ok\n", $userinput);
2532: } else {
2533: Failure( $client, "error: ".($!+0)."Unlink tmp Failed ".
2534: "while attempting tmpdel\n", $userinput);
2535: }
2536:
2537: return 1;
1.178.2.3 foxr 2538:
2539: }
2540: RegisterHandler("tmpdel", \&TmpDelHandler, 0, 1, 0);
2541: #
2542: # ls - list the contents of a directory. For each file in the
2543: # selected directory the filename followed by the full output of
2544: # the stat function is returned. The returned info for each
2545: # file are separated by ':'. The stat fields are separated by &'s.
2546: # Parameters:
2547: # $cmd - The command that dispatched us (ls).
2548: # $ulsdir - The directory path to list... I'm not sure what this
2549: # is relative as things like ls:. return e.g.
2550: # no_such_dir.
2551: # $client - Socket open on the client.
2552: # Returns:
2553: # 1 - indicating that the daemon should not disconnect.
2554: # Side Effects:
2555: # The reply is written to $client.
2556: #
2557: sub LsHandler {
1.178.2.4 albertel 2558: my $cmd = shift;
2559: my $ulsdir = shift;
2560: my $client = shift;
1.178.2.3 foxr 2561:
1.178.2.4 albertel 2562: my $userinput = "$cmd:$ulsdir";
1.178.2.3 foxr 2563:
1.178.2.4 albertel 2564: my $ulsout='';
2565: my $ulsfn;
2566: if (-e $ulsdir) {
2567: if(-d $ulsdir) {
2568: if (opendir(LSDIR,$ulsdir)) {
2569: while ($ulsfn=readdir(LSDIR)) {
2570: my @ulsstats=stat($ulsdir.'/'.$ulsfn);
2571: $ulsout.=$ulsfn.'&'.
2572: join('&',@ulsstats).':';
2573: }
2574: closedir(LSDIR);
2575: }
2576: } else {
2577: my @ulsstats=stat($ulsdir);
2578: $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':';
2579: }
2580: } else {
2581: $ulsout='no_such_dir';
2582: }
2583: if ($ulsout eq '') { $ulsout='empty'; }
2584: Reply($client, "$ulsout\n", $userinput);
2585:
2586:
2587: return 1;
1.178.2.3 foxr 2588: }
2589: RegisterHandler("ls", \&LsHandler, 0, 1, 0);
2590:
2591:
2592: #
2593: # Processes the setannounce command. This command
2594: # creates a file named announce.txt in the top directory of
2595: # the documentn root and sets its contents. The announce.txt file is
2596: # printed in its entirety at the LonCAPA login page. Note:
2597: # once the announcement.txt fileis created it cannot be deleted.
2598: # However, setting the contents of the file to empty removes the
2599: # announcement from the login page of loncapa so who cares.
2600: #
2601: # Parameters:
2602: # $cmd - The command that got us dispatched.
2603: # $announcement - The text of the announcement.
2604: # $client - Socket open on the client process.
2605: # Retunrns:
2606: # 1 - Indicating request processing should continue
2607: # Side Effects:
2608: # The file {DocRoot}/announcement.txt is created.
2609: # A reply is sent to $client.
2610: #
2611: sub SetAnnounceHandler {
1.178.2.4 albertel 2612: my $cmd = shift;
2613: my $announcement = shift;
2614: my $client = shift;
1.178.2.3 foxr 2615:
1.178.2.4 albertel 2616: my $userinput = "$cmd:$announcement";
1.178.2.3 foxr 2617:
1.178.2.4 albertel 2618: chomp($announcement);
2619: $announcement=&unescape($announcement);
2620: if (my $store=IO::File->new('>'.$perlvar{'lonDocRoot'}.
2621: '/announcement.txt')) {
2622: print $store $announcement;
2623: close $store;
2624: Reply($client, "ok\n", $userinput);
2625: } else {
2626: Failure($client, "error: ".($!+0)."\n", $userinput);
2627: }
1.178.2.3 foxr 2628:
1.178.2.4 albertel 2629: return 1;
1.178.2.3 foxr 2630: }
2631: RegisterHandler("setannounce", \&SetAnnounceHandler, 0, 1, 0);
2632:
2633: #
2634: # Return the version of the daemon. This can be used to determine
2635: # the compatibility of cross version installations or, alternatively to
2636: # simply know who's out of date and who isn't. Note that the version
2637: # is returned concatenated with the tail.
2638: # Parameters:
2639: # $cmd - the request that dispatched to us.
2640: # $tail - Tail of the request (client's version?).
2641: # $client - Socket open on the client.
2642: #Returns:
2643: # 1 - continue processing requests.
2644: # Side Effects:
2645: # Replies with version to $client.
2646: sub GetVersionHandler {
1.178.2.4 albertel 2647: my $client = shift;
2648: my $tail = shift;
2649: my $client = shift;
2650: my $userinput = $client;
2651:
2652: Reply($client, &version($userinput)."\n", $userinput);
1.178.2.3 foxr 2653:
2654:
1.178.2.4 albertel 2655: return 1;
1.178.2.3 foxr 2656: }
2657: RegisterHandler("version", \&GetVersionHandler, 0, 1, 0);
2658:
2659: # Set the current host and domain. This is used to support
2660: # multihomed systems. Each IP of the system, or even separate daemons
2661: # on the same IP can be treated as handling a separate lonCAPA virtual
2662: # machine. This command selects the virtual lonCAPA. The client always
2663: # knows the right one since it is lonc and it is selecting the domain/system
2664: # from the hosts.tab file.
2665: # Parameters:
2666: # $cmd - Command that dispatched us.
2667: # $tail - Tail of the command (domain/host requested).
2668: # $socket - Socket open on the client.
2669: #
2670: # Returns:
2671: # 1 - Indicates the program should continue to process requests.
2672: # Side-effects:
2673: # The default domain/system context is modified for this daemon.
2674: # a reply is sent to the client.
2675: #
2676: sub SelectHostHandler {
1.178.2.4 albertel 2677: my $cmd = shift;
2678: my $tail = shift;
2679: my $socket = shift;
1.178.2.3 foxr 2680:
1.178.2.4 albertel 2681: my $userinput ="$cmd:$tail";
1.178.2.3 foxr 2682:
1.178.2.4 albertel 2683: Reply($client, &sethost($userinput)."\n", $userinput);
1.178.2.3 foxr 2684:
2685:
1.178.2.4 albertel 2686: return 1;
1.178.2.3 foxr 2687: }
2688: RegisterHandler("sethost", \&SelectHostHandler, 0, 1, 0);
2689:
2690: # Process a request to exit:
2691: # - "bye" is sent to the client.
2692: # - The client socket is shutdown and closed.
2693: # - We indicate to the caller that we should exit.
2694: # Formal Parameters:
2695: # $cmd - The command that got us here.
2696: # $tail - Tail of the command (empty).
2697: # $client - Socket open on the tail.
2698: # Returns:
2699: # 0 - Indicating the program should exit!!
2700: #
2701: sub ExitHandler {
1.178.2.4 albertel 2702: my $cmd = shift;
2703: my $tail = shift;
2704: my $client = shift;
2705:
2706: my $userinput = "$cmd:$tail";
2707:
2708: &logthis("Client $clientip ($clientname) hanging up: $userinput");
2709: Reply($client, "bye\n", $userinput);
2710: $client->shutdown(2); # shutdown the socket forcibly.
2711: $client->close();
1.178.2.3 foxr 2712:
1.178.2.4 albertel 2713: return 0;
1.178.2.3 foxr 2714: }
2715: RegisterHandler("exit", \&ExitHandler, 0, 1,1);
2716: RegisterHandler("init", \&ExitHandler, 0, 1,1); # RE-init is like exit.
2717: RegisterHandler("quit", \&ExitHandler, 0, 1,1); # I like this too!
1.178.2.1 foxr 2718: #------------------------------------------------------------------------------------
2719: #
2720: # Process a Request. Takes a request from the client validates
2721: # it and performs the operation requested by it. Returns
2722: # a response to the client.
2723: #
2724: # Parameters:
2725: # request - A string containing the user's request.
2726: # Returns:
2727: # 0 - Requested to exit, caller should shut down.
2728: # 1 - Accept additional requests from the client.
2729: #
2730: sub ProcessRequest {
1.178.2.4 albertel 2731: my $Request = shift;
2732: my $KeepGoing = 1; # Assume we're not asked to stop.
1.178.2.1 foxr 2733:
1.178.2.4 albertel 2734: my $wasenc=0;
2735: my $userinput = $Request; # for compatibility with oldcode <yeach>
1.178.2.1 foxr 2736:
2737:
2738: # ------------------------------------------------------------ See if encrypted
2739:
1.178.2.4 albertel 2740: if($userinput =~ /^enc/) {
2741: $wasenc = 1;
2742: $userinput = Decipher($userinput);
2743: if(! $userinput) {
2744: Failure($client,"error:Encrypted data without negotiating key");
2745: return 0; # Break off with this imposter.
2746: }
2747: }
2748: # Split off the request keyword from the rest of the stuff.
1.178.2.1 foxr 2749:
1.178.2.4 albertel 2750: my ($command, $tail) = split(/:/, $userinput, 2);
1.178.2.2 foxr 2751:
1.178.2.4 albertel 2752: Debug("Command received: $command, encoded = $wasenc");
1.178.2.2 foxr 2753:
1.178.2.1 foxr 2754:
2755: # ------------------------------------------------------------- Normal commands
2756:
1.178.2.4 albertel 2757: #
2758: # If the command is in the hash, then execute it via the hash dispatch:
2759: #
2760: if(defined $Dispatcher{$command}) {
2761:
2762: my $DispatchInfo = $Dispatcher{$command};
2763: my $Handler = $$DispatchInfo[0];
2764: my $NeedEncode = $$DispatchInfo[1];
2765: my $ClientTypes = $$DispatchInfo[2];
2766: Debug("Matched dispatch hash: mustencode: $NeedEncode ClientType $ClientTypes");
1.178.2.1 foxr 2767:
1.178.2.4 albertel 2768: # Validate the request:
1.178.2.1 foxr 2769:
1.178.2.4 albertel 2770: my $ok = 1;
2771: my $requesterprivs = 0;
2772: if(isClient()) {
2773: $requesterprivs |= $CLIENT_OK;
2774: }
2775: if(isManager()) {
2776: $requesterprivs |= $MANAGER_OK;
2777: }
2778: if($NeedEncode && (!$wasenc)) {
2779: Debug("Must encode but wasn't: $NeedEncode $wasenc");
2780: $ok = 0;
2781: }
2782: if(($ClientTypes & $requesterprivs) == 0) {
2783: Debug("Client not privileged to do this operation");
2784: $ok = 0;
2785: }
2786:
2787: if($ok) {
2788: Debug("Dispatching to handler $command $tail");
2789: $KeepGoing = &$Handler($command, $tail, $client);
2790: } else {
2791: Debug("Refusing to dispatch because ok is false");
2792: Failure($client, "refused", $userinput);
2793: }
1.161 foxr 2794:
2795:
1.178.2.1 foxr 2796: # ------------------------------------------------------------- unknown command
1.97 foxr 2797:
1.178.2.4 albertel 2798: } else {
1.178.2.1 foxr 2799: # unknown command
1.178.2.4 albertel 2800: Failure($client, "unknown_cmd\n", $userinput);
2801: }
1.97 foxr 2802:
1.178.2.1 foxr 2803: return $KeepGoing;
2804: }
1.97 foxr 2805:
1.96 foxr 2806:
2807: #
1.140 foxr 2808: # GetCertificate: Given a transaction that requires a certificate,
2809: # this function will extract the certificate from the transaction
2810: # request. Note that at this point, the only concept of a certificate
2811: # is the hostname to which we are connected.
2812: #
2813: # Parameter:
2814: # request - The request sent by our client (this parameterization may
2815: # need to change when we really use a certificate granting
2816: # authority.
2817: #
2818: sub GetCertificate {
2819: my $request = shift;
2820:
2821: return $clientip;
2822: }
1.161 foxr 2823:
2824:
2825:
1.156 foxr 2826: #
2827: # ReadManagerTable: Reads in the current manager table. For now this is
2828: # done on each manager authentication because:
2829: # - These authentications are not frequent
2830: # - This allows dynamic changes to the manager table
2831: # without the need to signal to the lond.
2832: #
2833:
2834: sub ReadManagerTable {
2835:
2836: # Clean out the old table first..
2837:
1.178.2.4 albertel 2838: foreach my $key (keys %managers) {
2839: delete $managers{$key};
2840: }
2841:
2842: my $tablename = $perlvar{'lonTabDir'}."/managers.tab";
2843: if (!open (MANAGERS, $tablename)) {
2844: logthis('<font color="red">No manager table. Nobody can manage!!</font>');
2845: return;
2846: }
2847: while(my $host = <MANAGERS>) {
2848: chomp($host);
2849: if ($host =~ "^#") { # Comment line.
2850: logthis('<font color="green"> Skipping line: '. "$host</font>\n");
2851: next;
2852: }
2853: if (!defined $hostip{$host}) { # This is a non cluster member
1.161 foxr 2854: # The entry is of the form:
2855: # cluname:hostname
2856: # cluname - A 'cluster hostname' is needed in order to negotiate
2857: # the host key.
2858: # hostname- The dns name of the host.
2859: #
1.178.2.4 albertel 2860: my($cluname, $dnsname) = split(/:/, $host);
2861:
2862: my $ip = gethostbyname($dnsname);
2863: if(defined($ip)) { # bad names don't deserve entry.
2864: my $hostip = inet_ntoa($ip);
2865: $managers{$hostip} = $cluname;
2866: logthis('<font color="green"> registering manager '.
2867: "$dnsname as $cluname with $hostip </font>\n");
2868: }
2869: } else {
2870: logthis('<font color="green"> existing host'." $host</font>\n");
2871: $managers{$hostip{$host}} = $host; # Use info from cluster tab if clumemeber
2872: }
2873: }
1.156 foxr 2874: }
1.140 foxr 2875:
2876: #
2877: # ValidManager: Determines if a given certificate represents a valid manager.
2878: # in this primitive implementation, the 'certificate' is
2879: # just the connecting loncapa client name. This is checked
2880: # against a valid client list in the configuration.
2881: #
2882: #
2883: sub ValidManager {
2884: my $certificate = shift;
2885:
1.163 foxr 2886: return isManager;
1.140 foxr 2887: }
2888: #
1.143 foxr 2889: # CopyFile: Called as part of the process of installing a
2890: # new configuration file. This function copies an existing
2891: # file to a backup file.
2892: # Parameters:
2893: # oldfile - Name of the file to backup.
2894: # newfile - Name of the backup file.
2895: # Return:
2896: # 0 - Failure (errno has failure reason).
2897: # 1 - Success.
2898: #
2899: sub CopyFile {
2900: my $oldfile = shift;
2901: my $newfile = shift;
2902:
2903: # The file must exist:
2904:
2905: if(-e $oldfile) {
2906:
1.178.2.4 albertel 2907: # Read the old file.
1.143 foxr 2908:
2909: my $oldfh = IO::File->new("< $oldfile");
2910: if(!$oldfh) {
2911: return 0;
2912: }
2913: my @contents = <$oldfh>; # Suck in the entire file.
2914:
2915: # write the backup file:
2916:
2917: my $newfh = IO::File->new("> $newfile");
2918: if(!(defined $newfh)){
2919: return 0;
2920: }
2921: my $lines = scalar @contents;
2922: for (my $i =0; $i < $lines; $i++) {
2923: print $newfh ($contents[$i]);
2924: }
2925:
2926: $oldfh->close;
2927: $newfh->close;
2928:
2929: chmod(0660, $newfile);
2930:
2931: return 1;
2932:
2933: } else {
2934: return 0;
2935: }
2936: }
1.157 foxr 2937: #
2938: # Host files are passed out with externally visible host IPs.
2939: # If, for example, we are behind a fire-wall or NAT host, our
2940: # internally visible IP may be different than the externally
2941: # visible IP. Therefore, we always adjust the contents of the
2942: # host file so that the entry for ME is the IP that we believe
2943: # we have. At present, this is defined as the entry that
2944: # DNS has for us. If by some chance we are not able to get a
2945: # DNS translation for us, then we assume that the host.tab file
2946: # is correct.
2947: # BUGBUGBUG - in the future, we really should see if we can
2948: # easily query the interface(s) instead.
2949: # Parameter(s):
2950: # contents - The contents of the host.tab to check.
2951: # Returns:
2952: # newcontents - The adjusted contents.
2953: #
2954: #
2955: sub AdjustHostContents {
2956: my $contents = shift;
2957: my $adjusted;
2958: my $me = $perlvar{'lonHostID'};
2959:
1.178.2.4 albertel 2960: foreach my $line (split(/\n/,$contents)) {
1.157 foxr 2961: if(!(($line eq "") || ($line =~ /^ *\#/) || ($line =~ /^ *$/))) {
2962: chomp($line);
2963: my ($id,$domain,$role,$name,$ip,$maxcon,$idleto,$mincon)=split(/:/,$line);
2964: if ($id eq $me) {
1.178.2.4 albertel 2965: my $ip = gethostbyname($name);
2966: my $ipnew = inet_ntoa($ip);
2967: $ip = $ipnew;
1.157 foxr 2968: # Reconstruct the host line and append to adjusted:
2969:
1.178.2.4 albertel 2970: my $newline = "$id:$domain:$role:$name:$ip";
2971: if($maxcon ne "") { # Not all hosts have loncnew tuning params
2972: $newline .= ":$maxcon:$idleto:$mincon";
2973: }
2974: $adjusted .= $newline."\n";
1.157 foxr 2975:
1.178.2.4 albertel 2976: } else { # Not me, pass unmodified.
2977: $adjusted .= $line."\n";
2978: }
1.157 foxr 2979: } else { # Blank or comment never re-written.
2980: $adjusted .= $line."\n"; # Pass blanks and comments as is.
2981: }
1.178.2.4 albertel 2982: }
2983: return $adjusted;
1.157 foxr 2984: }
1.143 foxr 2985: #
2986: # InstallFile: Called to install an administrative file:
2987: # - The file is created with <name>.tmp
2988: # - The <name>.tmp file is then mv'd to <name>
2989: # This lugubrious procedure is done to ensure that we are never without
2990: # a valid, even if dated, version of the file regardless of who crashes
2991: # and when the crash occurs.
2992: #
2993: # Parameters:
2994: # Name of the file
2995: # File Contents.
2996: # Return:
2997: # nonzero - success.
2998: # 0 - failure and $! has an errno.
2999: #
3000: sub InstallFile {
3001: my $Filename = shift;
3002: my $Contents = shift;
3003: my $TempFile = $Filename.".tmp";
3004:
3005: # Open the file for write:
1.178.2.4 albertel 3006:
1.143 foxr 3007: my $fh = IO::File->new("> $TempFile"); # Write to temp.
3008: if(!(defined $fh)) {
3009: &logthis('<font color="red"> Unable to create '.$TempFile."</font>");
3010: return 0;
3011: }
3012: # write the contents of the file:
1.178.2.4 albertel 3013:
1.143 foxr 3014: print $fh ($Contents);
3015: $fh->close; # In case we ever have a filesystem w. locking
3016:
3017: chmod(0660, $TempFile);
3018:
3019: # Now we can move install the file in position.
3020:
3021: move($TempFile, $Filename);
3022:
3023: return 1;
3024: }
1.169 foxr 3025: #
3026: # ConfigFileFromSelector: converts a configuration file selector
3027: # (one of host or domain at this point) into a
3028: # configuration file pathname.
3029: #
3030: # Parameters:
3031: # selector - Configuration file selector.
3032: # Returns:
3033: # Full path to the file or undef if the selector is invalid.
3034: #
3035: sub ConfigFileFromSelector {
3036: my $selector = shift;
3037: my $tablefile;
3038:
3039: my $tabledir = $perlvar{'lonTabDir'}.'/';
3040: if ($selector eq "hosts") {
3041: $tablefile = $tabledir."hosts.tab";
3042: } elsif ($selector eq "domain") {
3043: $tablefile = $tabledir."domain.tab";
3044: } else {
3045: return undef;
3046: }
3047: return $tablefile;
1.143 foxr 3048:
1.169 foxr 3049: }
1.143 foxr 3050: #
1.141 foxr 3051: # PushFile: Called to do an administrative push of a file.
3052: # - Ensure the file being pushed is one we support.
3053: # - Backup the old file to <filename.saved>
3054: # - Separate the contents of the new file out from the
3055: # rest of the request.
3056: # - Write the new file.
3057: # Parameter:
3058: # Request - The entire user request. This consists of a : separated
3059: # string pushfile:tablename:contents.
3060: # NOTE: The contents may have :'s in it as well making things a bit
3061: # more interesting... but not much.
3062: # Returns:
3063: # String to send to client ("ok" or "refused" if bad file).
3064: #
3065: sub PushFile {
3066: my $request = shift;
3067: my ($command, $filename, $contents) = split(":", $request, 3);
3068:
3069: # At this point in time, pushes for only the following tables are
3070: # supported:
3071: # hosts.tab ($filename eq host).
3072: # domain.tab ($filename eq domain).
3073: # Construct the destination filename or reject the request.
3074: #
3075: # lonManage is supposed to ensure this, however this session could be
3076: # part of some elaborate spoof that managed somehow to authenticate.
3077: #
3078:
1.169 foxr 3079:
3080: my $tablefile = ConfigFileFromSelector($filename);
3081: if(! (defined $tablefile)) {
1.141 foxr 3082: return "refused";
3083: }
3084: #
3085: # >copy< the old table to the backup table
3086: # don't rename in case system crashes/reboots etc. in the time
3087: # window between a rename and write.
3088: #
3089: my $backupfile = $tablefile;
3090: $backupfile =~ s/\.tab$/.old/;
1.143 foxr 3091: if(!CopyFile($tablefile, $backupfile)) {
3092: &logthis('<font color="green"> CopyFile from '.$tablefile." to ".$backupfile." failed </font>");
3093: return "error:$!";
3094: }
1.141 foxr 3095: &logthis('<font color="green"> Pushfile: backed up '
1.178.2.4 albertel 3096: .$tablefile." to $backupfile</font>");
1.141 foxr 3097:
1.157 foxr 3098: # If the file being pushed is the host file, we adjust the entry for ourself so that the
3099: # IP will be our current IP as looked up in dns. Note this is only 99% good as it's possible
3100: # to conceive of conditions where we don't have a DNS entry locally. This is possible in a
3101: # network sense but it doesn't make much sense in a LonCAPA sense so we ignore (for now)
3102: # that possibilty.
3103:
3104: if($filename eq "host") {
3105: $contents = AdjustHostContents($contents);
3106: }
3107:
1.141 foxr 3108: # Install the new file:
3109:
1.143 foxr 3110: if(!InstallFile($tablefile, $contents)) {
3111: &logthis('<font color="red"> Pushfile: unable to install '
1.178.2.4 albertel 3112: .$tablefile." $! </font>");
1.143 foxr 3113: return "error:$!";
1.178.2.4 albertel 3114: } else {
1.143 foxr 3115: &logthis('<font color="green"> Installed new '.$tablefile
3116: ."</font>");
1.178.2.4 albertel 3117:
1.143 foxr 3118: }
3119:
1.141 foxr 3120:
3121: # Indicate success:
3122:
3123: return "ok";
3124:
3125: }
1.145 foxr 3126:
3127: #
3128: # Called to re-init either lonc or lond.
3129: #
3130: # Parameters:
3131: # request - The full request by the client. This is of the form
3132: # reinit:<process>
3133: # where <process> is allowed to be either of
3134: # lonc or lond
3135: #
3136: # Returns:
3137: # The string to be sent back to the client either:
3138: # ok - Everything worked just fine.
3139: # error:why - There was a failure and why describes the reason.
3140: #
3141: #
3142: sub ReinitProcess {
3143: my $request = shift;
3144:
1.146 foxr 3145:
3146: # separate the request (reinit) from the process identifier and
3147: # validate it producing the name of the .pid file for the process.
3148: #
3149: #
3150: my ($junk, $process) = split(":", $request);
1.147 foxr 3151: my $processpidfile = $perlvar{'lonDaemons'}.'/logs/';
1.146 foxr 3152: if($process eq 'lonc') {
3153: $processpidfile = $processpidfile."lonc.pid";
1.147 foxr 3154: if (!open(PIDFILE, "< $processpidfile")) {
3155: return "error:Open failed for $processpidfile";
3156: }
3157: my $loncpid = <PIDFILE>;
3158: close(PIDFILE);
3159: logthis('<font color="red"> Reinitializing lonc pid='.$loncpid
3160: ."</font>");
3161: kill("USR2", $loncpid);
1.146 foxr 3162: } elsif ($process eq 'lond') {
1.147 foxr 3163: logthis('<font color="red"> Reinitializing self (lond) </font>');
3164: &UpdateHosts; # Lond is us!!
1.146 foxr 3165: } else {
3166: &logthis('<font color="yellow" Invalid reinit request for '.$process
3167: ."</font>");
3168: return "error:Invalid process identifier $process";
3169: }
1.145 foxr 3170: return 'ok';
3171: }
1.168 foxr 3172: # Validate a line in a configuration file edit script:
3173: # Validation includes:
3174: # - Ensuring the command is valid.
3175: # - Ensuring the command has sufficient parameters
3176: # Parameters:
3177: # scriptline - A line to validate (\n has been stripped for what it's worth).
1.167 foxr 3178: #
1.168 foxr 3179: # Return:
3180: # 0 - Invalid scriptline.
3181: # 1 - Valid scriptline
3182: # NOTE:
3183: # Only the command syntax is checked, not the executability of the
3184: # command.
3185: #
3186: sub isValidEditCommand {
3187: my $scriptline = shift;
3188:
3189: # Line elements are pipe separated:
3190:
3191: my ($command, $key, $newline) = split(/\|/, $scriptline);
3192: &logthis('<font color="green"> isValideditCommand checking: '.
3193: "Command = '$command', Key = '$key', Newline = '$newline' </font>\n");
3194:
3195: if ($command eq "delete") {
3196: #
3197: # key with no newline.
3198: #
3199: if( ($key eq "") || ($newline ne "")) {
3200: return 0; # Must have key but no newline.
3201: } else {
3202: return 1; # Valid syntax.
3203: }
1.169 foxr 3204: } elsif ($command eq "replace") {
1.168 foxr 3205: #
3206: # key and newline:
3207: #
3208: if (($key eq "") || ($newline eq "")) {
3209: return 0;
3210: } else {
3211: return 1;
3212: }
1.169 foxr 3213: } elsif ($command eq "append") {
3214: if (($key ne "") && ($newline eq "")) {
3215: return 1;
3216: } else {
3217: return 0;
3218: }
1.168 foxr 3219: } else {
3220: return 0; # Invalid command.
3221: }
3222: return 0; # Should not get here!!!
3223: }
1.169 foxr 3224: #
3225: # ApplyEdit - Applies an edit command to a line in a configuration
3226: # file. It is the caller's responsiblity to validate the
3227: # edit line.
3228: # Parameters:
3229: # $directive - A single edit directive to apply.
3230: # Edit directives are of the form:
3231: # append|newline - Appends a new line to the file.
3232: # replace|key|newline - Replaces the line with key value 'key'
3233: # delete|key - Deletes the line with key value 'key'.
3234: # $editor - A config file editor object that contains the
3235: # file being edited.
3236: #
3237: sub ApplyEdit {
3238: my $directive = shift;
3239: my $editor = shift;
3240:
3241: # Break the directive down into its command and its parameters
3242: # (at most two at this point. The meaning of the parameters, if in fact
3243: # they exist depends on the command).
3244:
3245: my ($command, $p1, $p2) = split(/\|/, $directive);
3246:
3247: if($command eq "append") {
3248: $editor->Append($p1); # p1 - key p2 null.
3249: } elsif ($command eq "replace") {
3250: $editor->ReplaceLine($p1, $p2); # p1 - key p2 = newline.
3251: } elsif ($command eq "delete") {
3252: $editor->DeleteLine($p1); # p1 - key p2 null.
3253: } else { # Should not get here!!!
1.178.2.4 albertel 3254: die "Invalid command given to ApplyEdit $command";
1.169 foxr 3255: }
3256: }
3257: #
3258: # AdjustOurHost:
3259: # Adjusts a host file stored in a configuration file editor object
3260: # for the true IP address of this host. This is necessary for hosts
3261: # that live behind a firewall.
3262: # Those hosts have a publicly distributed IP of the firewall, but
3263: # internally must use their actual IP. We assume that a given
3264: # host only has a single IP interface for now.
3265: # Formal Parameters:
3266: # editor - The configuration file editor to adjust. This
3267: # editor is assumed to contain a hosts.tab file.
3268: # Strategy:
3269: # - Figure out our hostname.
3270: # - Lookup the entry for this host.
3271: # - Modify the line to contain our IP
3272: # - Do a replace for this host.
3273: sub AdjustOurHost {
3274: my $editor = shift;
3275:
3276: # figure out who I am.
3277:
3278: my $myHostName = $perlvar{'lonHostID'}; # LonCAPA hostname.
3279:
3280: # Get my host file entry.
3281:
3282: my $ConfigLine = $editor->Find($myHostName);
3283: if(! (defined $ConfigLine)) {
3284: die "AdjustOurHost - no entry for me in hosts file $myHostName";
3285: }
3286: # figure out my IP:
3287: # Use the config line to get my hostname.
3288: # Use gethostbyname to translate that into an IP address.
3289: #
3290: my ($id,$domain,$role,$name,$ip,$maxcon,$idleto,$mincon) = split(/:/,$ConfigLine);
3291: my $BinaryIp = gethostbyname($name);
3292: my $ip = inet_ntoa($ip);
3293: #
3294: # Reassemble the config line from the elements in the list.
3295: # Note that if the loncnew items were not present before, they will
3296: # be now even if they would be empty
3297: #
3298: my $newConfigLine = $id;
3299: foreach my $item ($domain, $role, $name, $ip, $maxcon, $idleto, $mincon) {
3300: $newConfigLine .= ":".$item;
3301: }
3302: # Replace the line:
3303:
3304: $editor->ReplaceLine($id, $newConfigLine);
3305:
3306: }
3307: #
3308: # ReplaceConfigFile:
3309: # Replaces a configuration file with the contents of a
3310: # configuration file editor object.
3311: # This is done by:
3312: # - Copying the target file to <filename>.old
3313: # - Writing the new file to <filename>.tmp
3314: # - Moving <filename.tmp> -> <filename>
3315: # This laborious process ensures that the system is never without
3316: # a configuration file that's at least valid (even if the contents
3317: # may be dated).
3318: # Parameters:
3319: # filename - Name of the file to modify... this is a full path.
3320: # editor - Editor containing the file.
3321: #
3322: sub ReplaceConfigFile {
3323: my $filename = shift;
3324: my $editor = shift;
1.168 foxr 3325:
1.169 foxr 3326: CopyFile ($filename, $filename.".old");
3327:
3328: my $contents = $editor->Get(); # Get the contents of the file.
3329:
3330: InstallFile($filename, $contents);
3331: }
1.168 foxr 3332: #
3333: #
3334: # Called to edit a configuration table file
1.167 foxr 3335: # Parameters:
3336: # request - The entire command/request sent by lonc or lonManage
3337: # Return:
3338: # The reply to send to the client.
1.168 foxr 3339: #
1.167 foxr 3340: sub EditFile {
3341: my $request = shift;
3342:
3343: # Split the command into it's pieces: edit:filetype:script
3344:
1.168 foxr 3345: my ($request, $filetype, $script) = split(/:/, $request,3); # : in script
1.167 foxr 3346:
3347: # Check the pre-coditions for success:
3348:
3349: if($request != "edit") { # Something is amiss afoot alack.
3350: return "error:edit request detected, but request != 'edit'\n";
3351: }
3352: if( ($filetype ne "hosts") &&
3353: ($filetype ne "domain")) {
3354: return "error:edit requested with invalid file specifier: $filetype \n";
3355: }
3356:
3357: # Split the edit script and check it's validity.
1.168 foxr 3358:
3359: my @scriptlines = split(/\n/, $script); # one line per element.
3360: my $linecount = scalar(@scriptlines);
3361: for(my $i = 0; $i < $linecount; $i++) {
3362: chomp($scriptlines[$i]);
3363: if(!isValidEditCommand($scriptlines[$i])) {
3364: return "error:edit with bad script line: '$scriptlines[$i]' \n";
3365: }
3366: }
1.145 foxr 3367:
1.167 foxr 3368: # Execute the edit operation.
1.169 foxr 3369: # - Create a config file editor for the appropriate file and
3370: # - execute each command in the script:
3371: #
3372: my $configfile = ConfigFileFromSelector($filetype);
3373: if (!(defined $configfile)) {
3374: return "refused\n";
3375: }
3376: my $editor = ConfigFileEdit->new($configfile);
1.167 foxr 3377:
1.169 foxr 3378: for (my $i = 0; $i < $linecount; $i++) {
3379: ApplyEdit($scriptlines[$i], $editor);
3380: }
3381: # If the file is the host file, ensure that our host is
3382: # adjusted to have our ip:
3383: #
3384: if($filetype eq "host") {
3385: AdjustOurHost($editor);
3386: }
3387: # Finally replace the current file with our file.
3388: #
3389: ReplaceConfigFile($configfile, $editor);
1.167 foxr 3390:
3391: return "ok\n";
3392: }
1.141 foxr 3393: #
1.96 foxr 3394: # Convert an error return code from lcpasswd to a string value.
3395: #
3396: sub lcpasswdstrerror {
3397: my $ErrorCode = shift;
1.97 foxr 3398: if(($ErrorCode < 0) || ($ErrorCode > $lastpwderror)) {
1.96 foxr 3399: return "lcpasswd Unrecognized error return value ".$ErrorCode;
3400: } else {
1.98 foxr 3401: return $passwderrors[$ErrorCode];
1.96 foxr 3402: }
3403: }
3404:
1.97 foxr 3405: #
3406: # Convert an error return code from lcuseradd to a string value:
3407: #
3408: sub lcuseraddstrerror {
3409: my $ErrorCode = shift;
3410: if(($ErrorCode < 0) || ($ErrorCode > $lastadderror)) {
3411: return "lcuseradd - Unrecognized error code: ".$ErrorCode;
3412: } else {
1.98 foxr 3413: return $adderrors[$ErrorCode];
1.97 foxr 3414: }
3415: }
3416:
1.23 harris41 3417: # grabs exception and records it to log before exiting
3418: sub catchexception {
1.27 albertel 3419: my ($error)=@_;
1.25 www 3420: $SIG{'QUIT'}='DEFAULT';
3421: $SIG{__DIE__}='DEFAULT';
1.165 albertel 3422: &status("Catching exception");
1.23 harris41 3423: &logthis("<font color=red>CRITICAL: "
1.178.2.4 albertel 3424: ."ABNORMAL EXIT. Child $$ for server $thisserver died through "
3425: ."a crash with this error msg->[$error]</font>");
1.57 www 3426: &logthis('Famous last words: '.$status.' - '.$lastlog);
1.27 albertel 3427: if ($client) { print $client "error: $error\n"; }
1.59 www 3428: $server->close();
1.27 albertel 3429: die($error);
1.23 harris41 3430: }
3431:
1.63 www 3432: sub timeout {
1.165 albertel 3433: &status("Handling Timeout");
1.63 www 3434: &logthis("<font color=ref>CRITICAL: TIME OUT ".$$."</font>");
3435: &catchexception('Timeout');
3436: }
1.22 harris41 3437: # -------------------------------- Set signal handlers to record abnormal exits
3438:
3439: $SIG{'QUIT'}=\&catchexception;
3440: $SIG{__DIE__}=\&catchexception;
3441:
1.81 matthew 3442: # ---------------------------------- Read loncapa_apache.conf and loncapa.conf
1.95 harris41 3443: &status("Read loncapa.conf and loncapa_apache.conf");
3444: my $perlvarref=LONCAPA::Configuration::read_conf('loncapa.conf');
1.141 foxr 3445: %perlvar=%{$perlvarref};
1.80 harris41 3446: undef $perlvarref;
1.19 www 3447:
1.35 harris41 3448: # ----------------------------- Make sure this process is running from user=www
3449: my $wwwid=getpwnam('www');
3450: if ($wwwid!=$<) {
1.178.2.4 albertel 3451: my $emailto="$perlvar{'lonAdmEMail'},$perlvar{'lonSysEMail'}";
3452: my $subj="LON: $currenthostid User ID mismatch";
3453: system("echo 'User ID mismatch. lond must be run as user www.' |\
1.35 harris41 3454: mailto $emailto -s '$subj' > /dev/null");
1.178.2.4 albertel 3455: exit 1;
1.35 harris41 3456: }
3457:
1.19 www 3458: # --------------------------------------------- Check if other instance running
3459:
3460: my $pidfile="$perlvar{'lonDaemons'}/logs/lond.pid";
3461:
3462: if (-e $pidfile) {
1.178.2.4 albertel 3463: my $lfh=IO::File->new("$pidfile");
3464: my $pide=<$lfh>;
3465: chomp($pide);
3466: if (kill 0 => $pide) { die "already running"; }
1.19 www 3467: }
1.1 albertel 3468:
3469: # ------------------------------------------------------------- Read hosts file
3470:
3471:
3472:
3473: # establish SERVER socket, bind and listen.
3474: $server = IO::Socket::INET->new(LocalPort => $perlvar{'londPort'},
3475: Type => SOCK_STREAM,
3476: Proto => 'tcp',
3477: Reuse => 1,
3478: Listen => 10 )
1.178.2.4 albertel 3479: or die "making socket: $@\n";
1.1 albertel 3480:
3481: # --------------------------------------------------------- Do global variables
3482:
3483: # global variables
3484:
1.134 albertel 3485: my %children = (); # keys are current child process IDs
1.178.2.1 foxr 3486: my $children = 0; # current number of children
1.1 albertel 3487:
3488: sub REAPER { # takes care of dead children
3489: $SIG{CHLD} = \&REAPER;
1.165 albertel 3490: &status("Handling child death");
1.178.2.1 foxr 3491: my $pid = wait;
3492: if (defined($children{$pid})) {
3493: &logthis("Child $pid died");
3494: $children --;
3495: delete $children{$pid};
3496: } else {
3497: &logthis("Unknown Child $pid died");
1.176 albertel 3498: }
1.165 albertel 3499: &status("Finished Handling child death");
1.1 albertel 3500: }
3501:
3502: sub HUNTSMAN { # signal handler for SIGINT
1.165 albertel 3503: &status("Killing children (INT)");
1.1 albertel 3504: local($SIG{CHLD}) = 'IGNORE'; # we're going to kill our children
3505: kill 'INT' => keys %children;
1.59 www 3506: &logthis("Free socket: ".shutdown($server,2)); # free up socket
1.1 albertel 3507: my $execdir=$perlvar{'lonDaemons'};
3508: unlink("$execdir/logs/lond.pid");
1.9 www 3509: &logthis("<font color=red>CRITICAL: Shutting down</font>");
1.165 albertel 3510: &status("Done killing children");
1.1 albertel 3511: exit; # clean up with dignity
3512: }
3513:
3514: sub HUPSMAN { # signal handler for SIGHUP
3515: local($SIG{CHLD}) = 'IGNORE'; # we're going to kill our children
1.165 albertel 3516: &status("Killing children for restart (HUP)");
1.1 albertel 3517: kill 'INT' => keys %children;
1.59 www 3518: &logthis("Free socket: ".shutdown($server,2)); # free up socket
1.9 www 3519: &logthis("<font color=red>CRITICAL: Restarting</font>");
1.134 albertel 3520: my $execdir=$perlvar{'lonDaemons'};
1.30 harris41 3521: unlink("$execdir/logs/lond.pid");
1.165 albertel 3522: &status("Restarting self (HUP)");
1.1 albertel 3523: exec("$execdir/lond"); # here we go again
3524: }
3525:
1.144 foxr 3526: #
1.148 foxr 3527: # Kill off hashes that describe the host table prior to re-reading it.
3528: # Hashes affected are:
3529: # %hostid, %hostdom %hostip
3530: #
3531: sub KillHostHashes {
3532: foreach my $key (keys %hostid) {
3533: delete $hostid{$key};
3534: }
3535: foreach my $key (keys %hostdom) {
3536: delete $hostdom{$key};
3537: }
3538: foreach my $key (keys %hostip) {
3539: delete $hostip{$key};
3540: }
3541: }
3542: #
3543: # Read in the host table from file and distribute it into the various hashes:
3544: #
3545: # - %hostid - Indexed by IP, the loncapa hostname.
3546: # - %hostdom - Indexed by loncapa hostname, the domain.
3547: # - %hostip - Indexed by hostid, the Ip address of the host.
3548: sub ReadHostTable {
3549:
3550: open (CONFIG,"$perlvar{'lonTabDir'}/hosts.tab") || die "Can't read host file";
3551:
3552: while (my $configline=<CONFIG>) {
1.178.2.1 foxr 3553: my ($id,$domain,$role,$name,$ip)=split(/:/,$configline);
3554: chomp($ip); $ip=~s/\D+$//;
3555: $hostid{$ip}=$id;
3556: $hostdom{$id}=$domain;
3557: $hostip{$id}=$ip;
3558: if ($id eq $perlvar{'lonHostID'}) { $thisserver=$name; }
1.148 foxr 3559: }
3560: close(CONFIG);
3561: }
3562: #
3563: # Reload the Apache daemon's state.
1.150 foxr 3564: # This is done by invoking /home/httpd/perl/apachereload
3565: # a setuid perl script that can be root for us to do this job.
1.148 foxr 3566: #
3567: sub ReloadApache {
1.150 foxr 3568: my $execdir = $perlvar{'lonDaemons'};
3569: my $script = $execdir."/apachereload";
3570: system($script);
1.148 foxr 3571: }
3572:
3573: #
1.144 foxr 3574: # Called in response to a USR2 signal.
3575: # - Reread hosts.tab
3576: # - All children connected to hosts that were removed from hosts.tab
3577: # are killed via SIGINT
3578: # - All children connected to previously existing hosts are sent SIGUSR1
3579: # - Our internal hosts hash is updated to reflect the new contents of
3580: # hosts.tab causing connections from hosts added to hosts.tab to
3581: # now be honored.
3582: #
3583: sub UpdateHosts {
1.165 albertel 3584: &status("Reload hosts.tab");
1.147 foxr 3585: logthis('<font color="blue"> Updating connections </font>');
1.148 foxr 3586: #
3587: # The %children hash has the set of IP's we currently have children
3588: # on. These need to be matched against records in the hosts.tab
3589: # Any ip's no longer in the table get killed off they correspond to
3590: # either dropped or changed hosts. Note that the re-read of the table
3591: # will take care of new and changed hosts as connections come into being.
3592:
3593:
3594: KillHostHashes;
3595: ReadHostTable;
3596:
3597: foreach my $child (keys %children) {
3598: my $childip = $children{$child};
3599: if(!$hostid{$childip}) {
1.149 foxr 3600: logthis('<font color="blue"> UpdateHosts killing child '
3601: ." $child for ip $childip </font>");
1.148 foxr 3602: kill('INT', $child);
1.149 foxr 3603: } else {
3604: logthis('<font color="green"> keeping child for ip '
3605: ." $childip (pid=$child) </font>");
1.148 foxr 3606: }
3607: }
3608: ReloadApache;
1.165 albertel 3609: &status("Finished reloading hosts.tab");
1.144 foxr 3610: }
3611:
1.148 foxr 3612:
1.57 www 3613: sub checkchildren {
1.165 albertel 3614: &status("Checking on the children (sending signals)");
1.57 www 3615: &initnewstatus();
3616: &logstatus();
3617: &logthis('Going to check on the children');
1.134 albertel 3618: my $docdir=$perlvar{'lonDocRoot'};
1.61 harris41 3619: foreach (sort keys %children) {
1.57 www 3620: sleep 1;
3621: unless (kill 'USR1' => $_) {
3622: &logthis ('Child '.$_.' is dead');
3623: &logstatus($$.' is dead');
3624: }
1.61 harris41 3625: }
1.63 www 3626: sleep 5;
1.113 albertel 3627: $SIG{ALRM} = sub { die "timeout" };
3628: $SIG{__DIE__} = 'DEFAULT';
1.165 albertel 3629: &status("Checking on the children (waiting for reports)");
1.63 www 3630: foreach (sort keys %children) {
3631: unless (-e "$docdir/lon-status/londchld/$_.txt") {
1.178.2.4 albertel 3632: eval {
3633: alarm(300);
3634: &logthis('Child '.$_.' did not respond');
3635: kill 9 => $_;
3636: #$emailto="$perlvar{'lonAdmEMail'},$perlvar{'lonSysEMail'}";
3637: #$subj="LON: $currenthostid killed lond process $_";
3638: #my $result=`echo 'Killed lond process $_.' | mailto $emailto -s '$subj' > /dev/null`;
3639: #$execdir=$perlvar{'lonDaemons'};
3640: #$result=`/bin/cp $execdir/logs/lond.log $execdir/logs/lond.log.$_`;
3641: alarm(0);
3642: }
1.63 www 3643: }
3644: }
1.113 albertel 3645: $SIG{ALRM} = 'DEFAULT';
1.155 albertel 3646: $SIG{__DIE__} = \&catchexception;
1.165 albertel 3647: &status("Finished checking children");
1.57 www 3648: }
3649:
1.1 albertel 3650: # --------------------------------------------------------------------- Logging
3651:
3652: sub logthis {
3653: my $message=shift;
3654: my $execdir=$perlvar{'lonDaemons'};
3655: my $fh=IO::File->new(">>$execdir/logs/lond.log");
3656: my $now=time;
3657: my $local=localtime($now);
1.58 www 3658: $lastlog=$local.': '.$message;
1.1 albertel 3659: print $fh "$local ($$): $message\n";
3660: }
3661:
1.77 foxr 3662: # ------------------------- Conditional log if $DEBUG true.
3663: sub Debug {
3664: my $message = shift;
3665: if($DEBUG) {
3666: &logthis($message);
3667: }
3668: }
1.161 foxr 3669:
3670: #
3671: # Sub to do replies to client.. this gives a hook for some
3672: # debug tracing too:
3673: # Parameters:
3674: # fd - File open on client.
3675: # reply - Text to send to client.
3676: # request - Original request from client.
3677: #
1.178.2.1 foxr 3678: # Note: This increments Transactions
3679: #
1.161 foxr 3680: sub Reply {
1.178.2.1 foxr 3681: alarm(120);
1.161 foxr 3682: my $fd = shift;
3683: my $reply = shift;
3684: my $request = shift;
3685:
3686: print $fd $reply;
3687: Debug("Request was $request Reply was $reply");
3688:
1.178.2.1 foxr 3689: $Transactions++;
3690: alarm(0);
3691:
3692:
3693: }
3694: #
3695: # Sub to report a failure.
3696: # This function:
3697: # - Increments the failure statistic counters.
3698: # - Invokes Reply to send the error message to the client.
3699: # Parameters:
3700: # fd - File descriptor open on the client
3701: # reply - Reply text to emit.
3702: # request - The original request message (used by Reply
3703: # to debug if that's enabled.
3704: # Implicit outputs:
3705: # $Failures- The number of failures is incremented.
3706: # Reply (invoked here) sends a message to the
3707: # client:
3708: #
3709: sub Failure {
1.178.2.4 albertel 3710: my $fd = shift;
3711: my $reply = shift;
3712: my $request = shift;
1.178.2.1 foxr 3713:
1.178.2.4 albertel 3714: $Failures++;
3715: Reply($fd, $reply, $request); # That's simple eh?
1.161 foxr 3716: }
1.57 www 3717: # ------------------------------------------------------------------ Log status
3718:
3719: sub logstatus {
1.178.2.4 albertel 3720: &status("Doing logging");
3721: my $docdir=$perlvar{'lonDocRoot'};
3722: {
3723: my $fh=IO::File->new(">>$docdir/lon-status/londstatus.txt");
3724: print $fh $$."\t".$currenthostid."\t".$status."\t".$lastlog."\n";
3725: $fh->close();
3726: }
3727: &status("Finished londstatus.txt");
3728: {
3729: my $fh=IO::File->new(">$docdir/lon-status/londchld/$$.txt");
3730: print $fh $status."\n".$lastlog."\n".time;
3731: $fh->close();
3732: }
3733: ResetStatistics;
3734: &status("Finished logging");
1.178.2.1 foxr 3735:
1.57 www 3736: }
3737:
3738: sub initnewstatus {
3739: my $docdir=$perlvar{'lonDocRoot'};
3740: my $fh=IO::File->new(">$docdir/lon-status/londstatus.txt");
3741: my $now=time;
3742: my $local=localtime($now);
3743: print $fh "LOND status $local - parent $$\n\n";
1.64 www 3744: opendir(DIR,"$docdir/lon-status/londchld");
1.134 albertel 3745: while (my $filename=readdir(DIR)) {
1.64 www 3746: unlink("$docdir/lon-status/londchld/$filename");
3747: }
3748: closedir(DIR);
1.57 www 3749: }
3750:
3751: # -------------------------------------------------------------- Status setting
3752:
3753: sub status {
3754: my $what=shift;
3755: my $now=time;
3756: my $local=localtime($now);
1.178.2.1 foxr 3757: my $status = "lond: $what $local ";
3758: if($Transactions) {
1.178.2.4 albertel 3759: $status .= " Transactions: $Transactions Failed; $Failures";
1.178.2.1 foxr 3760: }
3761: $0=$status;
1.57 www 3762: }
1.11 www 3763:
3764: # -------------------------------------------------------- Escape Special Chars
3765:
3766: sub escape {
3767: my $str=shift;
3768: $str =~ s/(\W)/"%".unpack('H2',$1)/eg;
3769: return $str;
3770: }
3771:
3772: # ----------------------------------------------------- Un-Escape Special Chars
3773:
3774: sub unescape {
3775: my $str=shift;
3776: $str =~ s/%([a-fA-F0-9][a-fA-F0-9])/pack("C",hex($1))/eg;
3777: return $str;
3778: }
3779:
1.1 albertel 3780: # ----------------------------------------------------------- Send USR1 to lonc
3781:
3782: sub reconlonc {
3783: my $peerfile=shift;
3784: &logthis("Trying to reconnect for $peerfile");
3785: my $loncfile="$perlvar{'lonDaemons'}/logs/lonc.pid";
3786: if (my $fh=IO::File->new("$loncfile")) {
3787: my $loncpid=<$fh>;
3788: chomp($loncpid);
3789: if (kill 0 => $loncpid) {
3790: &logthis("lonc at pid $loncpid responding, sending USR1");
3791: kill USR1 => $loncpid;
3792: } else {
1.178.2.4 albertel 3793: &logthis("<font color=red>CRITICAL: "
3794: ."lonc at pid $loncpid not responding, giving up</font>");
1.1 albertel 3795: }
3796: } else {
1.178.2.4 albertel 3797: &logthis('<font color=red>CRITICAL: lonc not running, giving up</font>');
1.1 albertel 3798: }
3799: }
3800:
3801: # -------------------------------------------------- Non-critical communication
1.11 www 3802:
1.1 albertel 3803: sub subreply {
3804: my ($cmd,$server)=@_;
3805: my $peerfile="$perlvar{'lonSockDir'}/$server";
3806: my $sclient=IO::Socket::UNIX->new(Peer =>"$peerfile",
3807: Type => SOCK_STREAM,
3808: Timeout => 10)
1.178.2.4 albertel 3809: or return "con_lost";
1.1 albertel 3810: print $sclient "$cmd\n";
3811: my $answer=<$sclient>;
3812: chomp($answer);
3813: if (!$answer) { $answer="con_lost"; }
3814: return $answer;
3815: }
3816:
3817: sub reply {
1.178.2.4 albertel 3818: my ($cmd,$server)=@_;
3819: my $answer;
3820: if ($server ne $currenthostid) {
3821: $answer=subreply($cmd,$server);
3822: if ($answer eq 'con_lost') {
3823: $answer=subreply("ping",$server);
3824: if ($answer ne $server) {
3825: &logthis("sub reply: answer != server answer is $answer, server is $server");
3826: &reconlonc("$perlvar{'lonSockDir'}/$server");
3827: }
3828: $answer=subreply($cmd,$server);
3829: }
3830: } else {
3831: $answer='self_reply';
3832: }
3833: return $answer;
1.1 albertel 3834: }
3835:
1.13 www 3836: # -------------------------------------------------------------- Talk to lonsql
3837:
1.12 harris41 3838: sub sqlreply {
3839: my ($cmd)=@_;
3840: my $answer=subsqlreply($cmd);
3841: if ($answer eq 'con_lost') { $answer=subsqlreply($cmd); }
3842: return $answer;
3843: }
3844:
3845: sub subsqlreply {
3846: my ($cmd)=@_;
3847: my $unixsock="mysqlsock";
3848: my $peerfile="$perlvar{'lonSockDir'}/$unixsock";
3849: my $sclient=IO::Socket::UNIX->new(Peer =>"$peerfile",
3850: Type => SOCK_STREAM,
3851: Timeout => 10)
1.178.2.4 albertel 3852: or return "con_lost";
1.12 harris41 3853: print $sclient "$cmd\n";
3854: my $answer=<$sclient>;
3855: chomp($answer);
3856: if (!$answer) { $answer="con_lost"; }
3857: return $answer;
3858: }
3859:
1.1 albertel 3860: # -------------------------------------------- Return path to profile directory
1.11 www 3861:
1.1 albertel 3862: sub propath {
3863: my ($udom,$uname)=@_;
3864: $udom=~s/\W//g;
3865: $uname=~s/\W//g;
1.16 www 3866: my $subdir=$uname.'__';
1.1 albertel 3867: $subdir =~ s/(.)(.)(.).*/$1\/$2\/$3/;
3868: my $proname="$perlvar{'lonUsersDir'}/$udom/$subdir/$uname";
3869: return $proname;
3870: }
3871:
3872: # --------------------------------------- Is this the home server of an author?
1.11 www 3873:
1.1 albertel 3874: sub ishome {
3875: my $author=shift;
3876: $author=~s/\/home\/httpd\/html\/res\/([^\/]*)\/([^\/]*).*/$1\/$2/;
3877: my ($udom,$uname)=split(/\//,$author);
3878: my $proname=propath($udom,$uname);
3879: if (-e $proname) {
3880: return 'owner';
3881: } else {
3882: return 'not_owner';
3883: }
3884: }
3885:
3886: # ======================================================= Continue main program
3887: # ---------------------------------------------------- Fork once and dissociate
3888:
1.134 albertel 3889: my $fpid=fork;
1.1 albertel 3890: exit if $fpid;
1.29 harris41 3891: die "Couldn't fork: $!" unless defined ($fpid);
1.1 albertel 3892:
1.29 harris41 3893: POSIX::setsid() or die "Can't start new session: $!";
1.1 albertel 3894:
3895: # ------------------------------------------------------- Write our PID on disk
3896:
1.134 albertel 3897: my $execdir=$perlvar{'lonDaemons'};
1.1 albertel 3898: open (PIDSAVE,">$execdir/logs/lond.pid");
3899: print PIDSAVE "$$\n";
3900: close(PIDSAVE);
1.9 www 3901: &logthis("<font color=red>CRITICAL: ---------- Starting ----------</font>");
1.57 www 3902: &status('Starting');
1.1 albertel 3903:
1.106 foxr 3904:
1.1 albertel 3905:
3906: # ----------------------------------------------------- Install signal handlers
3907:
1.57 www 3908:
1.1 albertel 3909: $SIG{CHLD} = \&REAPER;
3910: $SIG{INT} = $SIG{TERM} = \&HUNTSMAN;
3911: $SIG{HUP} = \&HUPSMAN;
1.57 www 3912: $SIG{USR1} = \&checkchildren;
1.144 foxr 3913: $SIG{USR2} = \&UpdateHosts;
1.106 foxr 3914:
1.148 foxr 3915: # Read the host hashes:
3916:
3917: ReadHostTable;
1.106 foxr 3918:
1.178.2.1 foxr 3919:
1.106 foxr 3920: # --------------------------------------------------------------
3921: # Accept connections. When a connection comes in, it is validated
3922: # and if good, a child process is created to process transactions
3923: # along the connection.
3924:
1.1 albertel 3925: while (1) {
1.165 albertel 3926: &status('Starting accept');
1.106 foxr 3927: $client = $server->accept() or next;
1.165 albertel 3928: &status('Accepted '.$client.' off to spawn');
1.106 foxr 3929: make_new_child($client);
1.165 albertel 3930: &status('Finished spawning');
1.1 albertel 3931: }
3932:
3933: sub make_new_child {
3934: my $pid;
3935: my $sigset;
1.106 foxr 3936:
3937: $client = shift;
1.165 albertel 3938: &status('Starting new child '.$client);
1.161 foxr 3939: &logthis('<font color="green"> Attempting to start child ('.$client.
3940: ")</font>");
1.1 albertel 3941: # block signal for fork
3942: $sigset = POSIX::SigSet->new(SIGINT);
3943: sigprocmask(SIG_BLOCK, $sigset)
1.29 harris41 3944: or die "Can't block SIGINT for fork: $!\n";
1.178.2.4 albertel 3945:
1.29 harris41 3946: die "fork: $!" unless defined ($pid = fork);
1.148 foxr 3947:
3948: $client->sockopt(SO_KEEPALIVE, 1); # Enable monitoring of
3949: # connection liveness.
3950:
3951: #
3952: # Figure out who we're talking to so we can record the peer in
3953: # the pid hash.
3954: #
3955: my $caller = getpeername($client);
3956: my ($port,$iaddr)=unpack_sockaddr_in($caller);
3957: $clientip=inet_ntoa($iaddr);
1.1 albertel 3958:
3959: if ($pid) {
3960: # Parent records the child's birth and returns.
3961: sigprocmask(SIG_UNBLOCK, $sigset)
1.29 harris41 3962: or die "Can't unblock SIGINT for fork: $!\n";
1.148 foxr 3963: $children{$pid} = $clientip;
1.178.2.1 foxr 3964: $children++;
1.57 www 3965: &status('Started child '.$pid);
1.1 albertel 3966: return;
3967: } else {
3968: # Child can *not* return from this subroutine.
3969: $SIG{INT} = 'DEFAULT'; # make SIGINT kill us as it did before
1.126 albertel 3970: $SIG{CHLD} = 'DEFAULT'; #make this default so that pwauth returns
3971: #don't get intercepted
1.57 www 3972: $SIG{USR1}= \&logstatus;
1.63 www 3973: $SIG{ALRM}= \&timeout;
1.57 www 3974: $lastlog='Forked ';
3975: $status='Forked';
3976:
1.1 albertel 3977: # unblock signals
3978: sigprocmask(SIG_UNBLOCK, $sigset)
1.29 harris41 3979: or die "Can't unblock SIGINT for fork: $!\n";
1.13 www 3980:
1.178.2.1 foxr 3981:
3982:
1.91 albertel 3983: &Authen::Krb5::init_context();
3984: &Authen::Krb5::init_ets();
1.178.2.4 albertel 3985:
1.161 foxr 3986: &status('Accepted connection');
1.1 albertel 3987: # =============================================================================
3988: # do something with the connection
3989: # -----------------------------------------------------------------------------
1.148 foxr 3990: # see if we know client and check for spoof IP by challenge
3991:
1.161 foxr 3992: ReadManagerTable; # May also be a manager!!
3993:
3994: my $clientrec=($hostid{$clientip} ne undef);
3995: my $ismanager=($managers{$clientip} ne undef);
3996: $clientname = "[unknonwn]";
3997: if($clientrec) { # Establish client type.
3998: $ConnectionType = "client";
3999: $clientname = $hostid{$clientip};
4000: if($ismanager) {
4001: $ConnectionType = "both";
4002: }
4003: } else {
4004: $ConnectionType = "manager";
4005: $clientname = $managers{$clientip};
4006: }
4007: my $clientok;
4008: if ($clientrec || $ismanager) {
4009: &status("Waiting for init from $clientip $clientname");
4010: &logthis('<font color="yellow">INFO: Connection, '.
4011: $clientip.
1.178.2.4 albertel 4012: " ($clientname) connection type = $ConnectionType </font>" );
1.161 foxr 4013: &status("Connecting $clientip ($clientname))");
4014: my $remotereq=<$client>;
4015: $remotereq=~s/[^\w:]//g;
4016: if ($remotereq =~ /^init/) {
4017: &sethost("sethost:$perlvar{'lonHostID'}");
4018: my $challenge="$$".time;
4019: print $client "$challenge\n";
1.178.2.4 albertel 4020: &status("Waiting for challenge reply from $clientip ($clientname)");
1.161 foxr 4021: $remotereq=<$client>;
4022: $remotereq=~s/\W//g;
4023: if ($challenge eq $remotereq) {
4024: $clientok=1;
4025: print $client "ok\n";
4026: } else {
1.178.2.4 albertel 4027: &logthis("<font color=blue>WARNING: $clientip did not reply challenge</font>");
1.161 foxr 4028: &status('No challenge reply '.$clientip);
4029: }
1.2 www 4030: } else {
1.178.2.4 albertel 4031: &logthis("<font color=blue>WARNING: "
1.161 foxr 4032: ."$clientip failed to initialize: >$remotereq< </font>");
4033: &status('No init '.$clientip);
4034: }
4035: } else {
1.178.2.4 albertel 4036: &logthis("<font color=blue>WARNING: Unknown client $clientip</font>");
1.161 foxr 4037: &status('Hung up on '.$clientip);
4038: }
4039: if ($clientok) {
1.1 albertel 4040: # ---------------- New known client connecting, could mean machine online again
1.161 foxr 4041:
4042: foreach my $id (keys(%hostip)) {
4043: if ($hostip{$id} ne $clientip ||
4044: $hostip{$currenthostid} eq $clientip) {
4045: # no need to try to do recon's to myself
4046: next;
1.115 albertel 4047: }
1.161 foxr 4048: &reconlonc("$perlvar{'lonSockDir'}/$id");
4049: }
4050: &logthis("<font color=green>Established connection: $clientname</font>");
4051: &status('Will listen to '.$clientname);
4052:
1.178.2.1 foxr 4053: ResetStatistics();
1.161 foxr 4054:
1.178.2.1 foxr 4055: # ------------------------------------------------------------ Process requests
4056: my $KeepGoing = 1;
4057: while ((my $userinput=GetRequest) && $KeepGoing) {
4058: $KeepGoing = ProcessRequest($userinput);
1.177 foxr 4059: # -------------------------------------------------------------------- complete
1.178.2.1 foxr 4060:
1.161 foxr 4061: &status('Listening to '.$clientname);
4062: }
1.59 www 4063: # --------------------------------------------- client unknown or fishy, refuse
1.161 foxr 4064: } else {
4065: print $client "refused\n";
4066: $client->close();
4067: &logthis("<font color=blue>WARNING: "
4068: ."Rejected client $clientip, closing connection</font>");
4069: }
4070: }
4071:
1.1 albertel 4072: # =============================================================================
1.161 foxr 4073:
4074: &logthis("<font color=red>CRITICAL: "
4075: ."Disconnect from $clientip ($clientname)</font>");
4076:
4077:
4078: # this exit is VERY important, otherwise the child will become
4079: # a producer of more and more children, forking yourself into
4080: # process death.
4081: exit;
1.106 foxr 4082:
1.78 foxr 4083: }
4084:
4085:
4086: #
4087: # Checks to see if the input roleput request was to set
4088: # an author role. If so, invokes the lchtmldir script to set
4089: # up a correct public_html
4090: # Parameters:
4091: # request - The request sent to the rolesput subchunk.
4092: # We're looking for /domain/_au
4093: # domain - The domain in which the user is having roles doctored.
4094: # user - Name of the user for which the role is being put.
4095: # authtype - The authentication type associated with the user.
4096: #
1.178.2.4 albertel 4097: sub ManagePermissions {
1.78 foxr 4098: my $request = shift;
4099: my $domain = shift;
4100: my $user = shift;
4101: my $authtype= shift;
4102:
4103: # See if the request is of the form /$domain/_au
1.178.2.1 foxr 4104: &logthis("ruequest is $request");
1.78 foxr 4105: if($request =~ /^(\/$domain\/_au)$/) { # It's an author rolesput...
4106: my $execdir = $perlvar{'lonDaemons'};
4107: my $userhome= "/home/$user" ;
1.134 albertel 4108: &logthis("system $execdir/lchtmldir $userhome $user $authtype");
1.78 foxr 4109: system("$execdir/lchtmldir $userhome $user $authtype");
4110: }
4111: }
4112: #
4113: # GetAuthType - Determines the authorization type of a user in a domain.
4114:
4115: # Returns the authorization type or nouser if there is no such user.
4116: #
1.178.2.4 albertel 4117: sub GetAuthType {
1.78 foxr 4118: my $domain = shift;
4119: my $user = shift;
4120:
1.79 foxr 4121: Debug("GetAuthType( $domain, $user ) \n");
1.78 foxr 4122: my $proname = &propath($domain, $user);
4123: my $passwdfile = "$proname/passwd";
4124: if( -e $passwdfile ) {
4125: my $pf = IO::File->new($passwdfile);
4126: my $realpassword = <$pf>;
4127: chomp($realpassword);
1.79 foxr 4128: Debug("Password info = $realpassword\n");
1.78 foxr 4129: my ($authtype, $contentpwd) = split(/:/, $realpassword);
1.79 foxr 4130: Debug("Authtype = $authtype, content = $contentpwd\n");
1.78 foxr 4131: my $availinfo = '';
1.91 albertel 4132: if($authtype eq 'krb4' or $authtype eq 'krb5') {
1.78 foxr 4133: $availinfo = $contentpwd;
4134: }
1.79 foxr 4135:
1.78 foxr 4136: return "$authtype:$availinfo";
1.178.2.4 albertel 4137: } else {
1.79 foxr 4138: Debug("Returning nouser");
1.78 foxr 4139: return "nouser";
4140: }
1.1 albertel 4141: }
4142:
1.84 albertel 4143: sub addline {
4144: my ($fname,$hostid,$ip,$newline)=@_;
4145: my $contents;
4146: my $found=0;
4147: my $expr='^'.$hostid.':'.$ip.':';
4148: $expr =~ s/\./\\\./g;
1.134 albertel 4149: my $sh;
1.84 albertel 4150: if ($sh=IO::File->new("$fname.subscription")) {
4151: while (my $subline=<$sh>) {
4152: if ($subline !~ /$expr/) {$contents.= $subline;} else {$found=1;}
4153: }
4154: $sh->close();
4155: }
4156: $sh=IO::File->new(">$fname.subscription");
4157: if ($contents) { print $sh $contents; }
4158: if ($newline) { print $sh $newline; }
4159: $sh->close();
4160: return $found;
1.86 www 4161: }
4162:
4163: sub getchat {
1.122 www 4164: my ($cdom,$cname,$udom,$uname)=@_;
1.87 www 4165: my %hash;
4166: my $proname=&propath($cdom,$cname);
4167: my @entries=();
1.88 albertel 4168: if (tie(%hash,'GDBM_File',"$proname/nohist_chatroom.db",
4169: &GDBM_READER(),0640)) {
4170: @entries=map { $_.':'.$hash{$_} } sort keys %hash;
4171: untie %hash;
1.123 www 4172: }
1.124 www 4173: my @participants=();
1.134 albertel 4174: my $cutoff=time-60;
1.123 www 4175: if (tie(%hash,'GDBM_File',"$proname/nohist_inchatroom.db",
1.124 www 4176: &GDBM_WRCREAT(),0640)) {
4177: $hash{$uname.':'.$udom}=time;
1.123 www 4178: foreach (sort keys %hash) {
4179: if ($hash{$_}>$cutoff) {
1.124 www 4180: $participants[$#participants+1]='active_participant:'.$_;
1.123 www 4181: }
4182: }
4183: untie %hash;
1.86 www 4184: }
1.124 www 4185: return (@participants,@entries);
1.86 www 4186: }
4187:
4188: sub chatadd {
1.88 albertel 4189: my ($cdom,$cname,$newchat)=@_;
4190: my %hash;
4191: my $proname=&propath($cdom,$cname);
4192: my @entries=();
1.142 www 4193: my $time=time;
1.88 albertel 4194: if (tie(%hash,'GDBM_File',"$proname/nohist_chatroom.db",
4195: &GDBM_WRCREAT(),0640)) {
4196: @entries=map { $_.':'.$hash{$_} } sort keys %hash;
4197: my ($lastid)=($entries[$#entries]=~/^(\w+)\:/);
4198: my ($thentime,$idnum)=split(/\_/,$lastid);
4199: my $newid=$time.'_000000';
4200: if ($thentime==$time) {
4201: $idnum=~s/^0+//;
4202: $idnum++;
4203: $idnum=substr('000000'.$idnum,-6,6);
4204: $newid=$time.'_'.$idnum;
4205: }
4206: $hash{$newid}=$newchat;
4207: my $expired=$time-3600;
4208: foreach (keys %hash) {
4209: my ($thistime)=($_=~/(\d+)\_/);
4210: if ($thistime<$expired) {
1.89 www 4211: delete $hash{$_};
1.88 albertel 4212: }
4213: }
4214: untie %hash;
1.142 www 4215: }
4216: {
4217: my $hfh;
4218: if ($hfh=IO::File->new(">>$proname/chatroom.log")) {
4219: print $hfh "$time:".&unescape($newchat)."\n";
4220: }
1.86 www 4221: }
1.84 albertel 4222: }
4223:
4224: sub unsub {
4225: my ($fname,$clientip)=@_;
4226: my $result;
1.161 foxr 4227: if (unlink("$fname.$clientname")) {
1.84 albertel 4228: $result="ok\n";
4229: } else {
4230: $result="not_subscribed\n";
4231: }
4232: if (-e "$fname.subscription") {
1.161 foxr 4233: my $found=&addline($fname,$clientname,$clientip,'');
1.84 albertel 4234: if ($found) { $result="ok\n"; }
4235: } else {
4236: if ($result != "ok\n") { $result="not_subscribed\n"; }
4237: }
4238: return $result;
4239: }
4240:
1.101 www 4241: sub currentversion {
4242: my $fname=shift;
4243: my $version=-1;
4244: my $ulsdir='';
4245: if ($fname=~/^(.+)\/[^\/]+$/) {
1.178.2.4 albertel 4246: $ulsdir=$1;
1.101 www 4247: }
1.114 albertel 4248: my ($fnamere1,$fnamere2);
4249: # remove version if already specified
1.101 www 4250: $fname=~s/\.\d+\.(\w+(?:\.meta)*)$/\.$1/;
1.114 albertel 4251: # get the bits that go before and after the version number
4252: if ( $fname=~/^(.*\.)(\w+(?:\.meta)*)$/ ) {
4253: $fnamere1=$1;
4254: $fnamere2='.'.$2;
4255: }
1.101 www 4256: if (-e $fname) { $version=1; }
4257: if (-e $ulsdir) {
1.134 albertel 4258: if(-d $ulsdir) {
4259: if (opendir(LSDIR,$ulsdir)) {
4260: my $ulsfn;
4261: while ($ulsfn=readdir(LSDIR)) {
1.101 www 4262: # see if this is a regular file (ignore links produced earlier)
1.134 albertel 4263: my $thisfile=$ulsdir.'/'.$ulsfn;
4264: unless (-l $thisfile) {
1.160 www 4265: if ($thisfile=~/\Q$fnamere1\E(\d+)\Q$fnamere2\E$/) {
1.134 albertel 4266: if ($1>$version) { $version=$1; }
4267: }
4268: }
4269: }
4270: closedir(LSDIR);
4271: $version++;
4272: }
4273: }
4274: }
4275: return $version;
1.101 www 4276: }
4277:
4278: sub thisversion {
4279: my $fname=shift;
4280: my $version=-1;
4281: if ($fname=~/\.(\d+)\.\w+(?:\.meta)*$/) {
4282: $version=$1;
4283: }
4284: return $version;
4285: }
4286:
1.84 albertel 4287: sub subscribe {
4288: my ($userinput,$clientip)=@_;
4289: my $result;
4290: my ($cmd,$fname)=split(/:/,$userinput);
4291: my $ownership=&ishome($fname);
4292: if ($ownership eq 'owner') {
1.101 www 4293: # explitly asking for the current version?
4294: unless (-e $fname) {
4295: my $currentversion=¤tversion($fname);
4296: if (&thisversion($fname)==$currentversion) {
4297: if ($fname=~/^(.+)\.\d+\.(\w+(?:\.meta)*)$/) {
4298: my $root=$1;
4299: my $extension=$2;
4300: symlink($root.'.'.$extension,
4301: $root.'.'.$currentversion.'.'.$extension);
1.102 www 4302: unless ($extension=~/\.meta$/) {
1.178.2.4 albertel 4303: symlink($root.'.'.$extension.'.meta',
4304: $root.'.'.$currentversion.'.'.$extension.'.meta');
1.102 www 4305: }
1.101 www 4306: }
4307: }
4308: }
1.84 albertel 4309: if (-e $fname) {
4310: if (-d $fname) {
4311: $result="directory\n";
4312: } else {
1.161 foxr 4313: if (-e "$fname.$clientname") {&unsub($fname,$clientip);}
1.134 albertel 4314: my $now=time;
1.161 foxr 4315: my $found=&addline($fname,$clientname,$clientip,
4316: "$clientname:$clientip:$now\n");
1.84 albertel 4317: if ($found) { $result="$fname\n"; }
4318: # if they were subscribed to only meta data, delete that
4319: # subscription, when you subscribe to a file you also get
4320: # the metadata
4321: unless ($fname=~/\.meta$/) { &unsub("$fname.meta",$clientip); }
4322: $fname=~s/\/home\/httpd\/html\/res/raw/;
4323: $fname="http://$thisserver/".$fname;
4324: $result="$fname\n";
4325: }
4326: } else {
4327: $result="not_found\n";
4328: }
4329: } else {
4330: $result="rejected\n";
4331: }
4332: return $result;
4333: }
1.91 albertel 4334:
4335: sub make_passwd_file {
1.98 foxr 4336: my ($uname, $umode,$npass,$passfilename)=@_;
1.91 albertel 4337: my $result="ok\n";
4338: if ($umode eq 'krb4' or $umode eq 'krb5') {
4339: {
4340: my $pf = IO::File->new(">$passfilename");
4341: print $pf "$umode:$npass\n";
4342: }
4343: } elsif ($umode eq 'internal') {
4344: my $salt=time;
4345: $salt=substr($salt,6,2);
4346: my $ncpass=crypt($npass,$salt);
4347: {
4348: &Debug("Creating internal auth");
4349: my $pf = IO::File->new(">$passfilename");
4350: print $pf "internal:$ncpass\n";
4351: }
4352: } elsif ($umode eq 'localauth') {
4353: {
4354: my $pf = IO::File->new(">$passfilename");
4355: print $pf "localauth:$npass\n";
4356: }
4357: } elsif ($umode eq 'unix') {
4358: {
4359: my $execpath="$perlvar{'lonDaemons'}/"."lcuseradd";
4360: {
4361: &Debug("Executing external: ".$execpath);
1.98 foxr 4362: &Debug("user = ".$uname.", Password =". $npass);
1.132 matthew 4363: my $se = IO::File->new("|$execpath > $perlvar{'lonDaemons'}/logs/lcuseradd.log");
1.91 albertel 4364: print $se "$uname\n";
4365: print $se "$npass\n";
4366: print $se "$npass\n";
1.97 foxr 4367: }
4368: my $useraddok = $?;
4369: if($useraddok > 0) {
4370: &logthis("Failed lcuseradd: ".&lcuseraddstrerror($useraddok));
1.91 albertel 4371: }
4372: my $pf = IO::File->new(">$passfilename");
4373: print $pf "unix:\n";
4374: }
4375: } elsif ($umode eq 'none') {
4376: {
4377: my $pf = IO::File->new(">$passfilename");
4378: print $pf "none:\n";
4379: }
4380: } else {
4381: $result="auth_mode_error\n";
4382: }
4383: return $result;
1.121 albertel 4384: }
4385:
4386: sub sethost {
4387: my ($remotereq) = @_;
4388: my (undef,$hostid)=split(/:/,$remotereq);
4389: if (!defined($hostid)) { $hostid=$perlvar{'lonHostID'}; }
4390: if ($hostip{$perlvar{'lonHostID'}} eq $hostip{$hostid}) {
4391: $currenthostid=$hostid;
4392: $currentdomainid=$hostdom{$hostid};
4393: &logthis("Setting hostid to $hostid, and domain to $currentdomainid");
4394: } else {
4395: &logthis("Requested host id $hostid not an alias of ".
4396: $perlvar{'lonHostID'}." refusing connection");
4397: return 'unable_to_set';
4398: }
4399: return 'ok';
4400: }
4401:
4402: sub version {
4403: my ($userinput)=@_;
4404: $remoteVERSION=(split(/:/,$userinput))[1];
4405: return "version:$VERSION";
1.127 albertel 4406: }
1.178.2.1 foxr 4407: ############## >>>>>>>>>>>>>>>>>>>>>>>>>> FUTUREWORK <<<<<<<<<<<<<<<<<<<<<<<<<<<<
1.128 albertel 4408: #There is a copy of this in lonnet.pm
1.178.2.1 foxr 4409: # Can we hoist these lil' things out into common places?
4410: #
1.127 albertel 4411: sub userload {
4412: my $numusers=0;
4413: {
4414: opendir(LONIDS,$perlvar{'lonIDsDir'});
4415: my $filename;
4416: my $curtime=time;
4417: while ($filename=readdir(LONIDS)) {
4418: if ($filename eq '.' || $filename eq '..') {next;}
1.138 albertel 4419: my ($mtime)=(stat($perlvar{'lonIDsDir'}.'/'.$filename))[9];
1.159 albertel 4420: if ($curtime-$mtime < 1800) { $numusers++; }
1.127 albertel 4421: }
4422: closedir(LONIDS);
4423: }
4424: my $userloadpercent=0;
4425: my $maxuserload=$perlvar{'lonUserLoadLim'};
4426: if ($maxuserload) {
1.129 albertel 4427: $userloadpercent=100*$numusers/$maxuserload;
1.127 albertel 4428: }
1.130 albertel 4429: $userloadpercent=sprintf("%.2f",$userloadpercent);
1.127 albertel 4430: return $userloadpercent;
1.91 albertel 4431: }
4432:
1.61 harris41 4433: # ----------------------------------- POD (plain old documentation, CPAN style)
4434:
4435: =head1 NAME
4436:
4437: lond - "LON Daemon" Server (port "LOND" 5663)
4438:
4439: =head1 SYNOPSIS
4440:
1.74 harris41 4441: Usage: B<lond>
4442:
4443: Should only be run as user=www. This is a command-line script which
4444: is invoked by B<loncron>. There is no expectation that a typical user
4445: will manually start B<lond> from the command-line. (In other words,
4446: DO NOT START B<lond> YOURSELF.)
1.61 harris41 4447:
4448: =head1 DESCRIPTION
4449:
1.74 harris41 4450: There are two characteristics associated with the running of B<lond>,
4451: PROCESS MANAGEMENT (starting, stopping, handling child processes)
4452: and SERVER-SIDE ACTIVITIES (password authentication, user creation,
4453: subscriptions, etc). These are described in two large
4454: sections below.
4455:
4456: B<PROCESS MANAGEMENT>
4457:
1.61 harris41 4458: Preforker - server who forks first. Runs as a daemon. HUPs.
4459: Uses IDEA encryption
4460:
1.74 harris41 4461: B<lond> forks off children processes that correspond to the other servers
4462: in the network. Management of these processes can be done at the
4463: parent process level or the child process level.
4464:
4465: B<logs/lond.log> is the location of log messages.
4466:
4467: The process management is now explained in terms of linux shell commands,
4468: subroutines internal to this code, and signal assignments:
4469:
4470: =over 4
4471:
4472: =item *
4473:
4474: PID is stored in B<logs/lond.pid>
4475:
4476: This is the process id number of the parent B<lond> process.
4477:
4478: =item *
4479:
4480: SIGTERM and SIGINT
4481:
4482: Parent signal assignment:
4483: $SIG{INT} = $SIG{TERM} = \&HUNTSMAN;
4484:
4485: Child signal assignment:
4486: $SIG{INT} = 'DEFAULT'; (and SIGTERM is DEFAULT also)
4487: (The child dies and a SIGALRM is sent to parent, awaking parent from slumber
4488: to restart a new child.)
4489:
4490: Command-line invocations:
4491: B<kill> B<-s> SIGTERM I<PID>
4492: B<kill> B<-s> SIGINT I<PID>
4493:
4494: Subroutine B<HUNTSMAN>:
4495: This is only invoked for the B<lond> parent I<PID>.
4496: This kills all the children, and then the parent.
4497: The B<lonc.pid> file is cleared.
4498:
4499: =item *
4500:
4501: SIGHUP
4502:
4503: Current bug:
4504: This signal can only be processed the first time
4505: on the parent process. Subsequent SIGHUP signals
4506: have no effect.
4507:
4508: Parent signal assignment:
4509: $SIG{HUP} = \&HUPSMAN;
4510:
4511: Child signal assignment:
4512: none (nothing happens)
4513:
4514: Command-line invocations:
4515: B<kill> B<-s> SIGHUP I<PID>
4516:
4517: Subroutine B<HUPSMAN>:
4518: This is only invoked for the B<lond> parent I<PID>,
4519: This kills all the children, and then the parent.
4520: The B<lond.pid> file is cleared.
4521:
4522: =item *
4523:
4524: SIGUSR1
4525:
4526: Parent signal assignment:
4527: $SIG{USR1} = \&USRMAN;
4528:
4529: Child signal assignment:
4530: $SIG{USR1}= \&logstatus;
4531:
4532: Command-line invocations:
4533: B<kill> B<-s> SIGUSR1 I<PID>
4534:
4535: Subroutine B<USRMAN>:
4536: When invoked for the B<lond> parent I<PID>,
4537: SIGUSR1 is sent to all the children, and the status of
4538: each connection is logged.
1.144 foxr 4539:
4540: =item *
4541:
4542: SIGUSR2
4543:
4544: Parent Signal assignment:
4545: $SIG{USR2} = \&UpdateHosts
4546:
4547: Child signal assignment:
4548: NONE
4549:
1.74 harris41 4550:
4551: =item *
4552:
4553: SIGCHLD
4554:
4555: Parent signal assignment:
4556: $SIG{CHLD} = \&REAPER;
4557:
4558: Child signal assignment:
4559: none
4560:
4561: Command-line invocations:
4562: B<kill> B<-s> SIGCHLD I<PID>
4563:
4564: Subroutine B<REAPER>:
4565: This is only invoked for the B<lond> parent I<PID>.
4566: Information pertaining to the child is removed.
4567: The socket port is cleaned up.
4568:
4569: =back
4570:
4571: B<SERVER-SIDE ACTIVITIES>
4572:
4573: Server-side information can be accepted in an encrypted or non-encrypted
4574: method.
4575:
4576: =over 4
4577:
4578: =item ping
4579:
4580: Query a client in the hosts.tab table; "Are you there?"
4581:
4582: =item pong
4583:
4584: Respond to a ping query.
4585:
4586: =item ekey
4587:
4588: Read in encrypted key, make cipher. Respond with a buildkey.
4589:
4590: =item load
4591:
4592: Respond with CPU load based on a computation upon /proc/loadavg.
4593:
4594: =item currentauth
4595:
4596: Reply with current authentication information (only over an
4597: encrypted channel).
4598:
4599: =item auth
4600:
4601: Only over an encrypted channel, reply as to whether a user's
4602: authentication information can be validated.
4603:
4604: =item passwd
4605:
4606: Allow for a password to be set.
4607:
4608: =item makeuser
4609:
4610: Make a user.
4611:
4612: =item passwd
4613:
4614: Allow for authentication mechanism and password to be changed.
4615:
4616: =item home
1.61 harris41 4617:
1.74 harris41 4618: Respond to a question "are you the home for a given user?"
4619:
4620: =item update
4621:
4622: Update contents of a subscribed resource.
4623:
4624: =item unsubscribe
4625:
4626: The server is unsubscribing from a resource.
4627:
4628: =item subscribe
4629:
4630: The server is subscribing to a resource.
4631:
4632: =item log
4633:
4634: Place in B<logs/lond.log>
4635:
4636: =item put
4637:
4638: stores hash in namespace
4639:
4640: =item rolesput
4641:
4642: put a role into a user's environment
4643:
4644: =item get
4645:
4646: returns hash with keys from array
4647: reference filled in from namespace
4648:
4649: =item eget
4650:
4651: returns hash with keys from array
4652: reference filled in from namesp (encrypts the return communication)
4653:
4654: =item rolesget
4655:
4656: get a role from a user's environment
4657:
4658: =item del
4659:
4660: deletes keys out of array from namespace
4661:
4662: =item keys
4663:
4664: returns namespace keys
4665:
4666: =item dump
4667:
4668: dumps the complete (or key matching regexp) namespace into a hash
4669:
4670: =item store
4671:
4672: stores hash permanently
4673: for this url; hashref needs to be given and should be a \%hashname; the
4674: remaining args aren't required and if they aren't passed or are '' they will
4675: be derived from the ENV
4676:
4677: =item restore
4678:
4679: returns a hash for a given url
4680:
4681: =item querysend
4682:
4683: Tells client about the lonsql process that has been launched in response
4684: to a sent query.
4685:
4686: =item queryreply
4687:
4688: Accept information from lonsql and make appropriate storage in temporary
4689: file space.
4690:
4691: =item idput
4692:
4693: Defines usernames as corresponding to IDs. (These "IDs" are unique identifiers
4694: for each student, defined perhaps by the institutional Registrar.)
4695:
4696: =item idget
4697:
4698: Returns usernames corresponding to IDs. (These "IDs" are unique identifiers
4699: for each student, defined perhaps by the institutional Registrar.)
4700:
4701: =item tmpput
4702:
4703: Accept and store information in temporary space.
4704:
4705: =item tmpget
4706:
4707: Send along temporarily stored information.
4708:
4709: =item ls
4710:
4711: List part of a user's directory.
4712:
1.135 foxr 4713: =item pushtable
4714:
4715: Pushes a file in /home/httpd/lonTab directory. Currently limited to:
4716: hosts.tab and domain.tab. The old file is copied to *.tab.backup but
4717: must be restored manually in case of a problem with the new table file.
4718: pushtable requires that the request be encrypted and validated via
4719: ValidateManager. The form of the command is:
4720: enc:pushtable tablename <tablecontents> \n
4721: where pushtable, tablename and <tablecontents> will be encrypted, but \n is a
4722: cleartext newline.
4723:
1.74 harris41 4724: =item Hanging up (exit or init)
4725:
4726: What to do when a client tells the server that they (the client)
4727: are leaving the network.
4728:
4729: =item unknown command
4730:
4731: If B<lond> is sent an unknown command (not in the list above),
4732: it replys to the client "unknown_cmd".
1.135 foxr 4733:
1.74 harris41 4734:
4735: =item UNKNOWN CLIENT
4736:
4737: If the anti-spoofing algorithm cannot verify the client,
4738: the client is rejected (with a "refused" message sent
4739: to the client, and the connection is closed.
4740:
4741: =back
1.61 harris41 4742:
4743: =head1 PREREQUISITES
4744:
4745: IO::Socket
4746: IO::File
4747: Apache::File
4748: Symbol
4749: POSIX
4750: Crypt::IDEA
4751: LWP::UserAgent()
4752: GDBM_File
4753: Authen::Krb4
1.91 albertel 4754: Authen::Krb5
1.61 harris41 4755:
4756: =head1 COREQUISITES
4757:
4758: =head1 OSNAMES
4759:
4760: linux
4761:
4762: =head1 SCRIPT CATEGORIES
4763:
4764: Server/Process
4765:
4766: =cut
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/back.gif){kind=icon}
Return to lond CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [LON-CAPA] / loncom